class BaseDevice:
""" Base class for all device interfaces, responsible for instantiate
the device driver itself based on the brand and model specified or in
the configuration file.
"""
typename_translate_dict = {
DeviceType.PRINTER: "Printer",
DeviceType.SCALE: "Scale",
DeviceType.BARCODE_READER: "Barcode Reader",
}
# Subclasses must define these attributes
device_dirname = None
required_interfaces = None
device_type = None
def __init__(self, brand=None, model=None, device=None, config_file=None,
port=None, consts=None):
if not self.device_dirname:
raise ValueError("Subclasses must define the "
"`device_dirname' attribute")
elif self.device_type is None:
raise ValueError("device_type must be defined")
self.brand = brand
self.device = device
self.model = model
self._port = port
self._driver_constants = consts
self._load_configuration(config_file)
def _load_configuration(self, config_file):
section_name = BaseDevice.typename_translate_dict[self.device_type]
if not self.model or not self.brand or (not self.device and not self._port):
self.config = StoqdriversConfig(config_file)
if not self.config.has_section(section_name):
raise ConfigError(_("There is no section named `%s'!")
% section_name)
self.brand = self.config.get_option("brand", section_name)
self.device = self.config.get_option("device", section_name)
self.model = self.config.get_option("model", section_name)
name = "stoqdrivers.%s.%s.%s" % (self.device_dirname,
self.brand, self.model)
try:
module = __import__(name, None, None, 'stoqdevices')
except ImportError, reason:
raise CriticalError("Could not load driver %s %s: %s"
% (self.brand.capitalize(),
self.model.upper(), reason))
class_name = self.model
driver_class = getattr(module, class_name, None)
if not driver_class:
raise CriticalError("Device driver at %s needs a class called %s"
% (name, class_name))
if not self._port:
self._port = SerialPort(self.device)
self._driver = driver_class(self._port, consts=self._driver_constants)
log.info(("Config data: brand=%s,device=%s,model=%s"
% (self.brand, self.device, self.model)))
self.check_interfaces()
class BaseDevice:
""" Base class for all device interfaces, responsible for instantiate
the device driver itself based on the brand and model specified or in
the configuration file.
"""
typename_translate_dict = {
DeviceType.PRINTER: "Printer",
DeviceType.SCALE: "Scale",
DeviceType.BARCODE_READER: "Barcode Reader",
}
# Subclasses must define these attributes
device_dirname = None
required_interfaces = None
device_type = None
def __init__(self, brand=None, model=None, device=None, config_file=None,
port=None, consts=None):
if not self.device_dirname:
raise ValueError("Subclasses must define the "
"`device_dirname' attribute")
elif self.device_type is None:
raise ValueError("device_type must be defined")
self.brand = brand
self.device = device
self.model = model
self._port = port
self._driver_constants = consts
self._load_configuration(config_file)
def _load_configuration(self, config_file):
section_name = BaseDevice.typename_translate_dict[self.device_type]
if not self.model or not self.brand or (not self.device and not self._port):
self.config = StoqdriversConfig(config_file)
if not self.config.has_section(section_name):
raise ConfigError(_("There is no section named `%s'!")
% section_name)
self.brand = self.config.get_option("brand", section_name)
self.device = self.config.get_option("device", section_name)
self.model = self.config.get_option("model", section_name)
name = "stoqdrivers.%s.%s.%s" % (self.device_dirname,
self.brand, self.model)
try:
module = __import__(name, None, None, 'stoqdevices')
except ImportError, reason:
raise CriticalError("Could not load driver %s %s: %s"
% (self.brand.capitalize(),
self.model.upper(), reason))
class_name = self.model
driver_class = getattr(module, class_name, None)
if not driver_class:
raise CriticalError("Device driver at %s needs a class called %s"
% (name, class_name))
if not self._port:
self._port = SerialPort(self.device)
self._driver = driver_class(self._port, consts=self._driver_constants)
log.info(("Config data: brand=%s,device=%s,model=%s"
% (self.brand, self.device, self.model)))
self.check_interfaces()
def _load_configuration(self, config_file):
try:
self.config = StoqdriversConfig(config_file)
except ConfigError as e:
log.info(e)
self.config = None
else:
# This allows overriding in the config file some or all of the
# data that was specified through the constructor
section_name = BaseDevice.typename_translate_dict[self.device_type]
for field in ['brand', 'device', 'model', 'inverted_drawer']:
try:
setattr(self, field, self.config.get_option(field, section_name))
except ConfigError:
# Field not found, ignore
pass
# At this point, either we have the data needed to initialize the
# device or we will need to bail
if (not self.model or not self.brand or
(self.interface == BaseDevice.INTERFACE_SERIAL and
not self.device and not self._port)):
raise ConfigError("Device not specified in config or constructor, giving up")
name = "stoqdrivers.%s.%s.%s" % (self.device_dirname,
self.brand, self.model)
try:
module = __import__(name, None, None, 'stoqdevices')
except ImportError as reason:
raise CriticalError("Could not load driver %s %s: %s"
% (self.brand.capitalize(),
self.model.upper(), reason))
class_name = self.model
driver_class = getattr(module, class_name, None)
if not driver_class:
raise CriticalError("Device driver at %s needs a class called %s"
% (name, class_name))
if self.interface == 'serial':
if not self._port:
self._port = SerialPort(self.device, self._baudrate)
self._driver = driver_class(self._port, consts=self._driver_constants)
elif self.interface == 'usb':
self._driver = driver_class(self.vendor_id, self.product_id)
else:
raise NotImplementedError('Interface not implemented')
log.info("Device class initialized: brand=%s,device=%s,model=%s"
% (self.brand, self.device, self.model))
# This check is necessary but ugly because the configuration code
# doesn't understand booleans, and we don't want mismatches
if self.inverted_drawer in ("True", True):
log.info("Inverting drawer check logic")
self._driver.inverted_drawer = True
self.check_interfaces()
def _load_configuration(self, config_file):
section_name = BaseDevice.typename_translate_dict[self.device_type]
if not self.model or not self.brand or (not self.device and not self._port):
self.config = StoqdriversConfig(config_file)
if not self.config.has_section(section_name):
raise ConfigError(_("There is no section named `%s'!")
% section_name)
self.brand = self.config.get_option("brand", section_name)
self.device = self.config.get_option("device", section_name)
self.model = self.config.get_option("model", section_name)
name = "stoqdrivers.%s.%s.%s" % (self.device_dirname,
self.brand, self.model)
try:
module = __import__(name, None, None, 'stoqdevices')
except ImportError, reason:
raise CriticalError("Could not load driver %s %s: %s"
% (self.brand.capitalize(),
self.model.upper(), reason))
def _load_configuration(self, config_file):
section_name = BaseDevice.typename_translate_dict[self.device_type]
if (not self.model or not self.brand
or (self.interface == BaseDevice.INTERFACE_SERIAL
and not self.device and not self._port)):
self.config = StoqdriversConfig(config_file)
if not self.config.has_section(section_name):
raise ConfigError(
_("There is no section named `%s'!") % section_name)
self.brand = self.config.get_option("brand", section_name)
self.device = self.config.get_option("device", section_name)
self.model = self.config.get_option("model", section_name)
name = "stoqdrivers.%s.%s.%s" % (self.device_dirname, self.brand,
self.model)
try:
module = __import__(name, None, None, 'stoqdevices')
except ImportError as reason:
raise CriticalError(
"Could not load driver %s %s: %s" %
(self.brand.capitalize(), self.model.upper(), reason))
class_name = self.model
driver_class = getattr(module, class_name, None)
if not driver_class:
raise CriticalError("Device driver at %s needs a class called %s" %
(name, class_name))
if self.interface == 'serial':
if not self._port:
self._port = SerialPort(self.device, self._baudrate)
self._driver = driver_class(self._port,
consts=self._driver_constants)
elif self.interface == 'usb':
self._driver = driver_class(self.vendor_id, self.product_id)
else:
raise NotImplementedError('Interface not implemented')
log.info(("Config data: brand=%s,device=%s,model=%s" %
(self.brand, self.device, self.model)))
self.check_interfaces()
def _load_configuration(self, config_file):
section_name = BaseDevice.typename_translate_dict[self.device_type]
if not self.model or not self.brand or (not self.device and not self._port):
self.config = StoqdriversConfig(config_file)
if not self.config.has_section(section_name):
raise ConfigError(_("There is no section named `%s'!")
% section_name)
self.brand = self.config.get_option("brand", section_name)
self.device = self.config.get_option("device", section_name)
self.model = self.config.get_option("model", section_name)
name = "stoqdrivers.%s.%s.%s" % (self.device_dirname,
self.brand, self.model)
try:
module = __import__(name, None, None, 'stoqdevices')
except ImportError, reason:
raise CriticalError("Could not load driver %s %s: %s"
% (self.brand.capitalize(),
self.model.upper(), reason))
class BaseDevice:
""" Base class for all device interfaces, responsible for instantiate
the device driver itself based on the brand and model specified or in
the configuration file.
"""
typename_translate_dict = {
DeviceType.PRINTER: "Printer",
DeviceType.SCALE: "Scale",
DeviceType.BARCODE_READER: "Barcode Reader",
}
# Subclasses must define these attributes
device_dirname = None
required_interfaces = None
device_type = None
INTERFACE_SERIAL = 'serial'
INTERFACE_USB = 'usb'
INTERFACE_ETHERNET = 'ethernet'
def __init__(self,
brand=None,
model=None,
device=None,
config_file=None,
port=None,
consts=None,
product_id=None,
vendor_id=None,
interface=INTERFACE_SERIAL,
baudrate=9600,
inverted_drawer=None,
device_name=None):
if not self.device_dirname:
raise ValueError("Subclasses must define the "
"`device_dirname' attribute")
elif self.device_type is None:
raise ValueError("device_type must be defined")
self.interface = interface
self.brand = brand
self.device = device
self.model = model
self.inverted_drawer = inverted_drawer
self.product_id = product_id
self.vendor_id = vendor_id
self._baudrate = baudrate
self._port = port
self._driver_constants = consts
self._device_name = device_name
self._load_configuration(config_file)
def _load_configuration(self, config_file):
try:
self.config = StoqdriversConfig(config_file)
except ConfigError as e:
log.info(e)
self.config = None
else:
# This allows overriding in the config file some or all of the
# data that was specified through the constructor
section_name = BaseDevice.typename_translate_dict[self.device_type]
for field in ['brand', 'device', 'model', 'inverted_drawer']:
try:
setattr(self, field,
self.config.get_option(field, section_name))
except ConfigError:
# Field not found, ignore
pass
# At this point, either we have the data needed to initialize the
# device or we will need to bail
if (not self.model or not self.brand
or (self.interface == BaseDevice.INTERFACE_SERIAL
and not self.device and not self._port)):
raise ConfigError(
"Device not specified in config or constructor, giving up")
name = "stoqdrivers.%s.%s.%s" % (self.device_dirname, self.brand,
self.model)
try:
module = __import__(name, None, None, 'stoqdevices')
except ImportError as reason:
raise CriticalError(
"Could not load driver %s %s: %s" %
(self.brand.capitalize(), self.model.upper(), reason))
class_name = self.model
driver_class = getattr(module, class_name, None)
if not driver_class:
raise CriticalError("Device driver at %s needs a class called %s" %
(name, class_name))
if self.interface == 'serial':
if not self._port:
self._port = SerialPort(self.device, self._baudrate)
self._driver = driver_class(self._port,
consts=self._driver_constants)
elif self.interface == 'usb':
self._driver = driver_class(self.vendor_id, self.product_id)
elif self.interface == 'ethernet':
if not self._port:
address, port = self._device_name.split(":")[1:]
self._port = EthernetPort(address, int(port))
self._driver = driver_class(self._port,
consts=self._driver_constants)
else:
raise NotImplementedError('Interface not implemented')
log.info("Device class initialized: brand=%s,device=%s,model=%s" %
(self.brand, self.device, self.model))
# This check is necessary but ugly because the configuration code
# doesn't understand booleans, and we don't want mismatches
if self.inverted_drawer in ("True", True):
log.info("Inverting drawer check logic")
self._driver.inverted_drawer = True
self.check_interfaces()
def get_model_name(self):
return self._driver.model_name
def get_firmware_version(self):
"""Printer firmware version
"""
return self._driver.get_firmware_version()
def check_interfaces(self):
""" This method must be implemented in subclass and must ensure that the
driver implements a valid interface for the current operation state.
"""
raise NotImplementedError
def notify_read(self, func):
""" This function can be called when the callsite must know when data
is coming from the serial port. It is necessary that a gobject main
loop is already running before calling this method.
"""
GObject.io_add_watch(self.get_port().fd, GObject.IO_IN,
lambda fd, cond: func(self, cond))
def set_port(self, port):
self._driver.set_port(port)
def get_port(self):
return self._driver.get_port()
class BaseDevice:
""" Base class for all device interfaces, responsible for instantiate
the device driver itself based on the brand and model specified or in
the configuration file.
"""
typename_translate_dict = {
DeviceType.PRINTER: "Printer",
DeviceType.SCALE: "Scale",
DeviceType.BARCODE_READER: "Barcode Reader",
}
# Subclasses must define these attributes
device_dirname = None
required_interfaces = None
device_type = None
INTERFACE_SERIAL = 'serial'
INTERFACE_USB = 'usb'
INTERFACE_ETHERNET = 'ethernet'
def __init__(self,
brand=None,
model=None,
device=None,
config_file=None,
port=None,
consts=None,
product_id=None,
vendor_id=None,
interface=INTERFACE_SERIAL,
baudrate=9600):
if not self.device_dirname:
raise ValueError("Subclasses must define the "
"`device_dirname' attribute")
elif self.device_type is None:
raise ValueError("device_type must be defined")
self.interface = interface
self.brand = brand
self.device = device
self.model = model
self.product_id = product_id
self.vendor_id = vendor_id
self._baudrate = baudrate
self._port = port
self._driver_constants = consts
self._load_configuration(config_file)
def _load_configuration(self, config_file):
section_name = BaseDevice.typename_translate_dict[self.device_type]
if (not self.model or not self.brand
or (self.interface == BaseDevice.INTERFACE_SERIAL
and not self.device and not self._port)):
self.config = StoqdriversConfig(config_file)
if not self.config.has_section(section_name):
raise ConfigError(
_("There is no section named `%s'!") % section_name)
self.brand = self.config.get_option("brand", section_name)
self.device = self.config.get_option("device", section_name)
self.model = self.config.get_option("model", section_name)
name = "stoqdrivers.%s.%s.%s" % (self.device_dirname, self.brand,
self.model)
try:
module = __import__(name, None, None, 'stoqdevices')
except ImportError as reason:
raise CriticalError(
"Could not load driver %s %s: %s" %
(self.brand.capitalize(), self.model.upper(), reason))
class_name = self.model
driver_class = getattr(module, class_name, None)
if not driver_class:
raise CriticalError("Device driver at %s needs a class called %s" %
(name, class_name))
if self.interface == 'serial':
if not self._port:
self._port = SerialPort(self.device, self._baudrate)
self._driver = driver_class(self._port,
consts=self._driver_constants)
elif self.interface == 'usb':
self._driver = driver_class(self.vendor_id, self.product_id)
else:
raise NotImplementedError('Interface not implemented')
log.info(("Config data: brand=%s,device=%s,model=%s" %
(self.brand, self.device, self.model)))
self.check_interfaces()
def get_model_name(self):
return self._driver.model_name
def get_firmware_version(self):
"""Printer firmware version
"""
return self._driver.get_firmware_version()
def check_interfaces(self):
""" This method must be implemented in subclass and must ensure that the
driver implements a valid interface for the current operation state.
"""
raise NotImplementedError
def notify_read(self, func):
""" This function can be called when the callsite must know when data
is coming from the serial port. It is necessary that a gobject main
loop is already running before calling this method.
"""
GObject.io_add_watch(self.get_port().fd, GObject.IO_IN,
lambda fd, cond: func(self, cond))
def set_port(self, port):
self._driver.set_port(port)
def get_port(self):
return self._driver.get_port()
class BaseDevice:
""" Base class for all device interfaces, responsible for instantiate
the device driver itself based on the brand and model specified or in
the configuration file.
"""
typename_translate_dict = {
DeviceType.PRINTER: "Printer",
DeviceType.SCALE: "Scale",
DeviceType.BARCODE_READER: "Barcode Reader",
}
# Subclasses must define these attributes
device_dirname = None
required_interfaces = None
device_type = None
INTERFACE_SERIAL = 'serial'
INTERFACE_USB = 'usb'
INTERFACE_ETHERNET = 'ethernet'
def __init__(self, brand=None, model=None, device=None,
config_file=None, port=None, consts=None, product_id=None,
vendor_id=None, interface=INTERFACE_SERIAL, baudrate=9600,
inverted_drawer=None):
if not self.device_dirname:
raise ValueError("Subclasses must define the "
"`device_dirname' attribute")
elif self.device_type is None:
raise ValueError("device_type must be defined")
self.interface = interface
self.brand = brand
self.device = device
self.model = model
self.inverted_drawer = inverted_drawer
self.product_id = product_id
self.vendor_id = vendor_id
self._baudrate = baudrate
self._port = port
self._driver_constants = consts
self._load_configuration(config_file)
def _load_configuration(self, config_file):
try:
self.config = StoqdriversConfig(config_file)
except ConfigError as e:
log.info(e)
self.config = None
else:
# This allows overriding in the config file some or all of the
# data that was specified through the constructor
section_name = BaseDevice.typename_translate_dict[self.device_type]
for field in ['brand', 'device', 'model', 'inverted_drawer']:
try:
setattr(self, field, self.config.get_option(field, section_name))
except ConfigError:
# Field not found, ignore
pass
# At this point, either we have the data needed to initialize the
# device or we will need to bail
if (not self.model or not self.brand or
(self.interface == BaseDevice.INTERFACE_SERIAL and
not self.device and not self._port)):
raise ConfigError("Device not specified in config or constructor, giving up")
name = "stoqdrivers.%s.%s.%s" % (self.device_dirname,
self.brand, self.model)
try:
module = __import__(name, None, None, 'stoqdevices')
except ImportError as reason:
raise CriticalError("Could not load driver %s %s: %s"
% (self.brand.capitalize(),
self.model.upper(), reason))
class_name = self.model
driver_class = getattr(module, class_name, None)
if not driver_class:
raise CriticalError("Device driver at %s needs a class called %s"
% (name, class_name))
if self.interface == 'serial':
if not self._port:
self._port = SerialPort(self.device, self._baudrate)
self._driver = driver_class(self._port, consts=self._driver_constants)
elif self.interface == 'usb':
self._driver = driver_class(self.vendor_id, self.product_id)
else:
raise NotImplementedError('Interface not implemented')
log.info("Device class initialized: brand=%s,device=%s,model=%s"
% (self.brand, self.device, self.model))
# This check is necessary but ugly because the configuration code
# doesn't understand booleans, and we don't want mismatches
if self.inverted_drawer in ("True", True):
log.info("Inverting drawer check logic")
self._driver.inverted_drawer = True
self.check_interfaces()
def get_model_name(self):
return self._driver.model_name
def get_firmware_version(self):
"""Printer firmware version
"""
return self._driver.get_firmware_version()
def check_interfaces(self):
""" This method must be implemented in subclass and must ensure that the
driver implements a valid interface for the current operation state.
"""
raise NotImplementedError
def notify_read(self, func):
""" This function can be called when the callsite must know when data
is coming from the serial port. It is necessary that a gobject main
loop is already running before calling this method.
"""
GObject.io_add_watch(self.get_port().fd, GObject.IO_IN,
lambda fd, cond: func(self, cond))
def set_port(self, port):
self._driver.set_port(port)
def get_port(self):
return self._driver.get_port()