def setUp(self):
HARDWARE.initialize_hardware()
HARDWARE.set_power_save(False)
def setUp(self):
HARDWARE.initialize_hardware()
HARDWARE.set_power_save(False)
# wait a bit for power save to disable
time.sleep(5)
def thermald_thread(end_event, hw_queue):
pm = messaging.PubMaster(['deviceState'])
sm = messaging.SubMaster([
"peripheralState", "gpsLocationExternal", "controlsState",
"pandaStates"
],
poll=["pandaStates"])
count = 0
onroad_conditions: Dict[str, bool] = {
"ignition": False,
}
startup_conditions: Dict[str, bool] = {}
startup_conditions_prev: Dict[str, bool] = {}
off_ts = None
started_ts = None
started_seen = False
thermal_status = ThermalStatus.green
last_hw_state = HardwareState(
network_type=NetworkType.none,
network_metered=False,
network_strength=NetworkStrength.unknown,
network_info=None,
nvme_temps=[],
modem_temps=[],
)
current_filter = FirstOrderFilter(0., CURRENT_TAU, DT_TRML)
temp_filter = FirstOrderFilter(0., TEMP_TAU, DT_TRML)
should_start_prev = False
in_car = False
engaged_prev = False
params = Params()
power_monitor = PowerMonitoring()
HARDWARE.initialize_hardware()
thermal_config = HARDWARE.get_thermal_config()
fan_controller = None
while not end_event.is_set():
sm.update(PANDA_STATES_TIMEOUT)
pandaStates = sm['pandaStates']
peripheralState = sm['peripheralState']
msg = read_thermal(thermal_config)
if sm.updated['pandaStates'] and len(pandaStates) > 0:
# Set ignition based on any panda connected
onroad_conditions["ignition"] = any(
ps.ignitionLine or ps.ignitionCan for ps in pandaStates
if ps.pandaType != log.PandaState.PandaType.unknown)
pandaState = pandaStates[0]
in_car = pandaState.harnessStatus != log.PandaState.HarnessStatus.notConnected
# Setup fan handler on first connect to panda
if fan_controller is None and peripheralState.pandaType != log.PandaState.PandaType.unknown:
if TICI:
fan_controller = TiciFanController()
elif (sec_since_boot() -
sm.rcv_time['pandaStates']) > DISCONNECT_TIMEOUT:
if onroad_conditions["ignition"]:
onroad_conditions["ignition"] = False
cloudlog.error("panda timed out onroad")
try:
last_hw_state = hw_queue.get_nowait()
except queue.Empty:
pass
msg.deviceState.freeSpacePercent = get_available_percent(default=100.0)
msg.deviceState.memoryUsagePercent = int(
round(psutil.virtual_memory().percent))
msg.deviceState.cpuUsagePercent = [
int(round(n)) for n in psutil.cpu_percent(percpu=True)
]
msg.deviceState.gpuUsagePercent = int(
round(HARDWARE.get_gpu_usage_percent()))
msg.deviceState.networkType = last_hw_state.network_type
msg.deviceState.networkMetered = last_hw_state.network_metered
msg.deviceState.networkStrength = last_hw_state.network_strength
if last_hw_state.network_info is not None:
msg.deviceState.networkInfo = last_hw_state.network_info
msg.deviceState.nvmeTempC = last_hw_state.nvme_temps
msg.deviceState.modemTempC = last_hw_state.modem_temps
msg.deviceState.screenBrightnessPercent = HARDWARE.get_screen_brightness(
)
msg.deviceState.usbOnline = HARDWARE.get_usb_present()
current_filter.update(msg.deviceState.batteryCurrent / 1e6)
max_comp_temp = temp_filter.update(
max(max(msg.deviceState.cpuTempC), msg.deviceState.memoryTempC,
max(msg.deviceState.gpuTempC)))
if fan_controller is not None:
msg.deviceState.fanSpeedPercentDesired = fan_controller.update(
max_comp_temp, onroad_conditions["ignition"])
is_offroad_for_5_min = (started_ts is None) and (
(not started_seen) or (off_ts is None) or
(sec_since_boot() - off_ts > 60 * 5))
if is_offroad_for_5_min and max_comp_temp > OFFROAD_DANGER_TEMP:
# If device is offroad we want to cool down before going onroad
# since going onroad increases load and can make temps go over 107
thermal_status = ThermalStatus.danger
else:
current_band = THERMAL_BANDS[thermal_status]
band_idx = list(THERMAL_BANDS.keys()).index(thermal_status)
if current_band.min_temp is not None and max_comp_temp < current_band.min_temp:
thermal_status = list(THERMAL_BANDS.keys())[band_idx - 1]
elif current_band.max_temp is not None and max_comp_temp > current_band.max_temp:
thermal_status = list(THERMAL_BANDS.keys())[band_idx + 1]
# **** starting logic ****
# Ensure date/time are valid
now = datetime.datetime.utcnow()
startup_conditions["time_valid"] = (now.year > 2020) or (
now.year == 2020 and now.month >= 10)
set_offroad_alert_if_changed("Offroad_InvalidTime",
(not startup_conditions["time_valid"]))
startup_conditions["up_to_date"] = params.get(
"Offroad_ConnectivityNeeded") is None or params.get_bool(
"DisableUpdates") or params.get_bool("SnoozeUpdate")
startup_conditions["not_uninstalling"] = not params.get_bool(
"DoUninstall")
startup_conditions["accepted_terms"] = params.get(
"HasAcceptedTerms") == terms_version
# with 2% left, we killall, otherwise the phone will take a long time to boot
startup_conditions["free_space"] = msg.deviceState.freeSpacePercent > 2
startup_conditions["completed_training"] = params.get("CompletedTrainingVersion") == training_version or \
params.get_bool("Passive")
startup_conditions["not_driver_view"] = not params.get_bool(
"IsDriverViewEnabled")
startup_conditions["not_taking_snapshot"] = not params.get_bool(
"IsTakingSnapshot")
# if any CPU gets above 107 or the battery gets above 63, kill all processes
# controls will warn with CPU above 95 or battery above 60
onroad_conditions[
"device_temp_good"] = thermal_status < ThermalStatus.danger
set_offroad_alert_if_changed(
"Offroad_TemperatureTooHigh",
(not onroad_conditions["device_temp_good"]))
# TODO: this should move to TICI.initialize_hardware, but we currently can't import params there
if TICI:
if not os.path.isfile("/persist/comma/living-in-the-moment"):
if not Path("/data/media").is_mount():
set_offroad_alert_if_changed("Offroad_StorageMissing",
True)
else:
# check for bad NVMe
try:
with open("/sys/block/nvme0n1/device/model") as f:
model = f.read().strip()
if not model.startswith(
"Samsung SSD 980") and params.get(
"Offroad_BadNvme") is None:
set_offroad_alert_if_changed(
"Offroad_BadNvme", True)
cloudlog.event("Unsupported NVMe",
model=model,
error=True)
except Exception:
pass
# Handle offroad/onroad transition
should_start = all(onroad_conditions.values())
if started_ts is None:
should_start = should_start and all(startup_conditions.values())
if should_start != should_start_prev or (count == 0):
params.put_bool("IsOnroad", should_start)
params.put_bool("IsOffroad", not should_start)
params.put_bool("IsEngaged", False)
engaged_prev = False
HARDWARE.set_power_save(not should_start)
if sm.updated['controlsState']:
engaged = sm['controlsState'].enabled
if engaged != engaged_prev:
params.put_bool("IsEngaged", engaged)
engaged_prev = engaged
try:
with open('/dev/kmsg', 'w') as kmsg:
kmsg.write(f"<3>[thermald] engaged: {engaged}\n")
except Exception:
pass
if should_start:
off_ts = None
if started_ts is None:
started_ts = sec_since_boot()
started_seen = True
else:
if onroad_conditions["ignition"] and (startup_conditions !=
startup_conditions_prev):
cloudlog.event("Startup blocked",
startup_conditions=startup_conditions,
onroad_conditions=onroad_conditions)
started_ts = None
if off_ts is None:
off_ts = sec_since_boot()
# Offroad power monitoring
power_monitor.calculate(peripheralState, onroad_conditions["ignition"])
msg.deviceState.offroadPowerUsageUwh = power_monitor.get_power_used()
msg.deviceState.carBatteryCapacityUwh = max(
0, power_monitor.get_car_battery_capacity())
current_power_draw = HARDWARE.get_current_power_draw()
statlog.sample("power_draw", current_power_draw)
msg.deviceState.powerDrawW = current_power_draw
som_power_draw = HARDWARE.get_som_power_draw()
statlog.sample("som_power_draw", som_power_draw)
msg.deviceState.somPowerDrawW = som_power_draw
# Check if we need to disable charging (handled by boardd)
msg.deviceState.chargingDisabled = power_monitor.should_disable_charging(
onroad_conditions["ignition"], in_car, off_ts)
# Check if we need to shut down
if power_monitor.should_shutdown(peripheralState,
onroad_conditions["ignition"], in_car,
off_ts, started_seen):
cloudlog.warning(f"shutting device down, offroad since {off_ts}")
params.put_bool("DoShutdown", True)
msg.deviceState.chargingError = current_filter.x > 0. and msg.deviceState.batteryPercent < 90 # if current is positive, then battery is being discharged
msg.deviceState.started = started_ts is not None
msg.deviceState.startedMonoTime = int(1e9 * (started_ts or 0))
last_ping = params.get("LastAthenaPingTime")
if last_ping is not None:
msg.deviceState.lastAthenaPingTime = int(last_ping)
msg.deviceState.thermalStatus = thermal_status
pm.send("deviceState", msg)
should_start_prev = should_start
startup_conditions_prev = startup_conditions.copy()
# Log to statsd
statlog.gauge("free_space_percent", msg.deviceState.freeSpacePercent)
statlog.gauge("gpu_usage_percent", msg.deviceState.gpuUsagePercent)
statlog.gauge("memory_usage_percent",
msg.deviceState.memoryUsagePercent)
for i, usage in enumerate(msg.deviceState.cpuUsagePercent):
statlog.gauge(f"cpu{i}_usage_percent", usage)
for i, temp in enumerate(msg.deviceState.cpuTempC):
statlog.gauge(f"cpu{i}_temperature", temp)
for i, temp in enumerate(msg.deviceState.gpuTempC):
statlog.gauge(f"gpu{i}_temperature", temp)
statlog.gauge("memory_temperature", msg.deviceState.memoryTempC)
statlog.gauge("ambient_temperature", msg.deviceState.ambientTempC)
for i, temp in enumerate(msg.deviceState.pmicTempC):
statlog.gauge(f"pmic{i}_temperature", temp)
for i, temp in enumerate(last_hw_state.nvme_temps):
statlog.gauge(f"nvme_temperature{i}", temp)
for i, temp in enumerate(last_hw_state.modem_temps):
statlog.gauge(f"modem_temperature{i}", temp)
statlog.gauge("fan_speed_percent_desired",
msg.deviceState.fanSpeedPercentDesired)
statlog.gauge("screen_brightness_percent",
msg.deviceState.screenBrightnessPercent)
# report to server once every 10 minutes
if (count % int(600. / DT_TRML)) == 0:
cloudlog.event(
"STATUS_PACKET",
count=count,
pandaStates=[
strip_deprecated_keys(p.to_dict()) for p in pandaStates
],
peripheralState=strip_deprecated_keys(
peripheralState.to_dict()),
location=(strip_deprecated_keys(
sm["gpsLocationExternal"].to_dict())
if sm.alive["gpsLocationExternal"] else None),
deviceState=strip_deprecated_keys(msg.to_dict()))
count += 1