def test_012_reboot_ap_check_ssh_password(self):
u"""设备重启后，SSH登录验证(testlink_ID:1657)"""
log.debug("012")
tmp = SettingsBusiness(self.s)
#获取默认ssh password
default_ssh_password = tmp.get_ssh_pwd()
#修改ssh 密码为纯数字
tmp.set_setting({'sshPassword':"******"})
time.sleep(60)
tmp1 = APSBusiness(self.s)
tmp1.reboot_many_aps(data_ap['7610_mac'], data_ap['7600_mac'], data_ap['7600lr_mac'])
time.sleep(420)
#在AP CLI下查看国家默认配置
result1 = tmp.get_cli_ssh_password(data_basic['7600_ip'],
data_basic['sshUser'], "abcdefgh")
result2 = tmp.get_cli_ssh_password(data_basic['7600lr_ip'],
data_basic['sshUser'], "abcdefgh")
result3 = tmp.get_cli_ssh_password(data_basic['7610_ip'],
data_basic['sshUser'], "abcdefgh")
#把ssh 密码为默认
tmp.set_setting({'sshPassword':default_ssh_password,
'countryDomain':"US"})
time.sleep(60)
self.assertIn("abcdefgh", result1)
self.assertIn("abcdefgh", result2)
self.assertIn("abcdefgh", result3)
def test_001_Platform_Administrator_add_ap(self):
u"""平台管理员-能添加ap"""
log.debug("001")
tmp1 = NetworkListBusiness(self.s)
#描述：启用无线网卡
tmp1.wlan_enable(data_basic['wlan_pc'])
tmp1.dhcp_release_wlan(data_basic['wlan_pc'])
#使用用户名密码，带着cookie登录cloud，并返回响应数据
tmp1.webLogin(data_basic['cloud_user'], data_basic['cloud_pwd'])
#获取默认网络组default的id
networkid = tmp1.get_network_id("default")
time.sleep(60)
tmp = UserBusiness(self.s)
#修改测试用户为平台管理员
tmp.set_user_authority(data_basic['Cloud_test_user'], \
data_basic['Cloud_test_email'], "Platform Administrator", [networkid])
time.sleep(60)
#admin用户退出登录
tmp.webLogout()
#使用测试用户登录
tmp2 = APSBusiness(self.s)
tmp2.webLogin(data_basic['Cloud_test_user'], data_basic['Cloud_test_pwd'])
#添加ap-7610
#将ap复位，并将ap的hosts替换，指向本地cloud，然后将该ap添加到cloud中
tmp2.add_ap_2_local_cloud(data_basic['7610_ip'], data_ap['7610_mac'], "autotest_7610")
#cloud上获取该网络组的ssh密码
tmp3 = SettingsBusiness(self.s)
ssh_pwd = tmp3.get_ssh_pwd()
#判断ap是否已经和cloud配对上
result = tmp2.check_ap_pair_cloud(data_basic['7610_ip'],
data_basic['sshUser'], ssh_pwd)
self.assertTrue(result)
def test_002_add_3_model_aps_2_cloud(self):
u"""三个netwrok分别添加不同的ap，并判断是否添加成功"""
log.debug("002")
tmp = APSBusiness(self.s)
tmp1 = NetworkListBusiness(self.s)
tmp2 = SettingsBusiness(self.s)
#将ap复位，并将ap的hosts替换，指向本地cloud，然后将该ap添加到cloud中
tmp.add_ap_2_local_cloud(data_basic['7610_ip'], data_ap['7610_mac'],
"autotest_7610")
#cloud上获取该网络组的ssh密码
ssh_pwd = tmp2.get_ssh_pwd()
#选择进入group1网络组
tmp1.goin_network("group1")
tmp.add_ap_2_local_cloud(data_basic['7600_ip'], data_ap['7600_mac'],
"autotest_7600")
#cloud上获取该网络组的ssh密码
ssh_pwd1 = tmp2.get_ssh_pwd()
#选择进入group2网络组
tmp1.goin_network("group2")
tmp.add_ap_2_local_cloud(data_basic['7600lr_ip'],
data_ap['7600lr_mac'], "autotest_7600lr")
#cloud上获取该网络组的ssh密码
ssh_pwd2 = tmp2.get_ssh_pwd()
#判断ap是否已经和cloud配对上
result1 = tmp.check_ap_pair_cloud(data_basic['7610_ip'],
data_basic['sshUser'], ssh_pwd)
result2 = tmp.check_ap_pair_cloud(data_basic['7600_ip'],
data_basic['sshUser'], ssh_pwd1)
result3 = tmp.check_ap_pair_cloud(data_basic['7600lr_ip'],
data_basic['sshUser'], ssh_pwd2)
self.assertTrue(result1)
self.assertTrue(result2)
self.assertTrue(result3)
print("add 3 model aps to cloud pass!")
def test_011_error_password(self):
u"""错误SSH密码登录失败验证(testlink_ID:1653)"""
log.debug("011")
tmp = SettingsBusiness(self.s)
result = tmp.get_cli_ssh_password(data_basic['7600_ip'],
data_basic['sshUser'], "12345678")
self.assertNotIn("12345678", result)
def test_001_add_3_model_aps_2_cloud(self):
u"""cloud添加三种型号的ap，并判断是否添加成功(testlinkID:691-1)"""
log.debug("001")
tmp = APSBusiness(self.s)
#描述：启用无线网卡
tmp.wlan_enable(data_basic['wlan_pc'])
tmp.dhcp_release_wlan(data_basic['wlan_pc'])
#将ap复位，并将ap的hosts替换，指向本地cloud，然后将该ap添加到cloud中
tmp.add_ap_2_local_cloud(data_basic['7610_ip'], data_ap['7610_mac'], "autotest_7610")
tmp.add_ap_2_local_cloud(data_basic['7600_ip'], data_ap['7600_mac'], "autotest_7600")
tmp.add_ap_2_local_cloud(data_basic['7600lr_ip'], data_ap['7600lr_mac'], "autotest_7600lr")
#cloud上获取该网络组的ssh密码
tmp1 = SettingsBusiness(self.s)
ssh_pwd = tmp1.get_ssh_pwd()
#判断ap是否已经和cloud配对上
result1 = tmp.check_ap_pair_cloud(data_basic['7610_ip'],
data_basic['sshUser'], ssh_pwd)
result2 = tmp.check_ap_pair_cloud(data_basic['7600_ip'],
data_basic['sshUser'], ssh_pwd)
result3 = tmp.check_ap_pair_cloud(data_basic['7600lr_ip'],
data_basic['sshUser'], ssh_pwd)
self.assertTrue(result1)
self.assertTrue(result2)
self.assertTrue(result3)
print "add 3 model aps to cloud pass!"
def test_005_reset_ap_check_country(self):
u"""重置验证国家(testlink_ID:1628)"""
log.debug("005")
#删除7600
tmp1 = APSBusiness(self.s)
tmp1.delete_ap(data_ap['7600_mac'])
time.sleep(360)
tmp = SettingsBusiness(self.s)
result = tmp.get_cli_country(data_basic['7600_ip'],
data_basic['sshUser'], "admin")
self.assertIn("840", result)
def test_004_reboot_ap_check_country(self):
u"""页面重启验证国家(testlink_ID:1626)"""
log.debug("004")
#重启7600
tmp1 = APSBusiness(self.s)
tmp1.reboot_one_ap(data_ap['7600_mac'])
time.sleep(420)
tmp = SettingsBusiness(self.s)
#在AP CLI下查看国家默认配置
ssh_pwd = tmp.get_ssh_pwd()
result = tmp.get_cli_country(data_basic['7600_ip'],
data_basic['sshUser'], ssh_pwd)
self.assertIn("156", result)
def test_010_sshPassword_letter_and_digital(self):
u"""字母和数字组合SSH密码检测(testlink_ID:1648,1651)"""
log.debug("010")
tmp = SettingsBusiness(self.s)
#获取默认ssh password
default_ssh_password = tmp.get_ssh_pwd()
#修改ssh 密码为纯数字
tmp.set_setting({'sshPassword':"******"})
time.sleep(60)
#在AP CLI下查看国家默认配置
result1 = tmp.get_cli_ssh_password(data_basic['7600_ip'],
data_basic['sshUser'], "abcd1234")
result2 = tmp.get_cli_ssh_password(data_basic['7600lr_ip'],
data_basic['sshUser'], "abcd1234")
result3 = tmp.get_cli_ssh_password(data_basic['7610_ip'],
data_basic['sshUser'], "abcd1234")
#把ssh 密码为默认
tmp.set_setting({'sshPassword':default_ssh_password})
time.sleep(60)
self.assertIn("abcd1234", result1)
self.assertIn("abcd1234", result2)
self.assertIn("abcd1234", result3)
def test_009_sshPassword_letter(self):
u"""纯字母SSH密码检测(testlink_ID:1647,1650)"""
log.debug("009")
tmp = SettingsBusiness(self.s)
#获取默认ssh password
default_ssh_password = tmp.get_ssh_pwd()
#修改ssh 密码为纯数字
tmp.set_setting({'sshPassword':"******"})
time.sleep(60)
#在AP CLI下查看国家默认配置
result1 = tmp.get_cli_ssh_password(data_basic['7600_ip'],
data_basic['sshUser'], "abcdefgh")
result2 = tmp.get_cli_ssh_password(data_basic['7600lr_ip'],
data_basic['sshUser'], "abcdefgh")
result3 = tmp.get_cli_ssh_password(data_basic['7610_ip'],
data_basic['sshUser'], "abcdefgh")
#把ssh 密码为默认
tmp.set_setting({'sshPassword':default_ssh_password})
time.sleep(60)
self.assertIn("abcdefgh", result1)
self.assertIn("abcdefgh", result2)
self.assertIn("abcdefgh", result3)
def test_008_sshPassword_digital(self):
u"""纯数字SSH密码检测(testlink_ID:1646,1649)"""
log.debug("008")
tmp = SettingsBusiness(self.s)
#获取默认ssh password
default_ssh_password = tmp.get_ssh_pwd()
#修改ssh 密码为纯数字
tmp.set_setting({'sshPassword':"******"})
time.sleep(60)
#在AP CLI下查看国家默认配置
result1 = tmp.get_cli_ssh_password(data_basic['7600_ip'],
data_basic['sshUser'], "12345678")
result2 = tmp.get_cli_ssh_password(data_basic['7600lr_ip'],
data_basic['sshUser'], "12345678")
result3 = tmp.get_cli_ssh_password(data_basic['7610_ip'],
data_basic['sshUser'], "12345678")
#把ssh 密码为默认
tmp.set_setting({'sshPassword':default_ssh_password})
time.sleep(60)
self.assertIn("12345678", result1)
self.assertIn("12345678", result2)
self.assertIn("12345678", result3)
def test_003_change_country_setting(self):
u"""验证修改国家配置是否生效(testlink_ID:1624)"""
log.debug("003")
tmp = SettingsBusiness(self.s)
#修改国家为中国
tmp.set_setting({'countryDomain':"CN"})
time.sleep(60)
#在AP CLI下查看国家默认配置
ssh_pwd = tmp.get_ssh_pwd()
result1 = tmp.get_cli_country(data_basic['7600_ip'],
data_basic['sshUser'], ssh_pwd)
result2 = tmp.get_cli_ath0_country(data_basic['7600_ip'],
data_basic['sshUser'], ssh_pwd)
result3 = tmp.get_cli_ath1_country(data_basic['7600_ip'],
data_basic['sshUser'], ssh_pwd)
self.assertIn("156", result1)
self.assertIn("156", result2)
self.assertIn("156", result3)
def test_002_check_country_default_setting(self):
u"""国家检查默认配置(testlink_ID:1623)"""
log.debug("002")
tmp = SettingsBusiness(self.s)
#获取默认国家信息
country = tmp.get_countryDomain()
#在AP CLI下查看国家默认配置
ssh_pwd = tmp.get_ssh_pwd()
result_7600 = tmp.get_cli_country(data_basic['7600_ip'],
data_basic['sshUser'], ssh_pwd)
result_7610 = tmp.get_cli_country(data_basic['7610_ip'],
data_basic['sshUser'], ssh_pwd)
result_7600lr = tmp.get_cli_country(data_basic['7600lr_ip'],
data_basic['sshUser'], ssh_pwd)
self.assertEqual("US", country)
self.assertIn("840", result_7600)
self.assertIn("840", result_7610)
self.assertIn("840", result_7600lr)
def test_007_offline_ap_check_timezone(self):
u"""AP离线时配置时区(testlink_ID:1643)"""
log.debug("007")
#重启7600
tmp1 = APSBusiness(self.s)
tmp1.reboot_one_ap(data_ap['7600_mac'])
time.sleep(100)
#修改时区为GWT
tmp = SettingsBusiness(self.s)
tmp.set_setting({'timezone':"Etc/GMT"})
time.sleep(320)
#获取ap cli的时区
ssh_pwd = tmp.get_ssh_pwd()
result = tmp.get_cli_timezone(data_basic['7600_ip'],
data_basic['sshUser'], ssh_pwd)
self.assertIn("+0000", result)
def test_006_reboot_ap_check_timezone(self):
u"""重启AP之后查看时区(testlink_ID:1642)"""
log.debug("006")
#7600再添加回cloud
tmp1 = APSBusiness(self.s)
tmp1.add_ap_2_local_cloud(data_basic['7600_ip'], data_ap['7600_mac'], "autotest_7600")
#修改时区为北京
tmp = SettingsBusiness(self.s)
tmp.set_setting({'timezone':"Asia/Shanghai"})
time.sleep(60)
#然后重启7600
tmp1.reboot_one_ap(data_ap['7600_mac'])
time.sleep(420)
#获取ap cli的时区
ssh_pwd = tmp.get_ssh_pwd()
result = tmp.get_cli_timezone(data_basic['7600_ip'],
data_basic['sshUser'], ssh_pwd)
self.assertIn("+0800", result)
def test_002_check_connection_m_time_function(self):
u"""Connection Time单位选择m（分钟）功能测试(Enable勾选)(testlink_ID:1589)"""
log.debug("002")
#新建一个策略time policy1,连接时间2分钟，重置时间每天23点
tmp = TimePolicyBusiness(self.s)
#断开无线网卡的连接
tmp.disconnect_ap()
data_dict = {
'status': 1,
'reconnectType': 1,
'resetDay': 1,
'resetHour': "23",
'hour': "24",
'resetTimeType': "AM",
'timezone': "Etc/GMT",
'connectionTimeMap': {
'd': "0",
'h': "0",
'm': "2"
},
'connectionTimeoutMap': {
'd': "",
'h': "",
'm': ""
}
}
tmp.add_timepolicy("time policy1", data_dict)
#获取时间策略的id
timepolicy_id = tmp.get_timepolicy_id("time policy1")
#修改ssid1的ssid，并开启时间策略，并选择time policy1
tmp1 = SSIDSBusiness(self.s)
encry_dict = {
'ssid_encryption': "3",
'ssid_wpa_encryption': "0",
'ssid_wpa_key_mode': "0",
'ssid_wpa_key': data_wireless['short_wpa']
}
data_dict1 = {
'ssid_ssid':
data_wireless['all_ssid'],
'ssid_timed_client_policy':
"%s" % timepolicy_id,
'removed_macs':
"%s,%s" %
(data_ap['7610_mac'].upper(), data_ap['7600lr_mac'].upper())
}
tmp1.edit_ssid(data_ap['7600_mac'], 'GWN-Cloud', encry_dict,
data_dict1)
time.sleep(120)
#先修改ap的系统时间为01:00:00
tmp2 = SettingsBusiness(self.s)
ssh_pwd = tmp2.get_ssh_pwd()
ssh = SSH(data_basic['7600_ip'], ssh_pwd)
ssh.ssh_cmd(data_basic['sshUser'], "date -s 01:00:00")
#无线网卡连接
tmp1.connect_DHCP_WPA_AP(data_wireless['all_ssid'],
data_wireless['short_wpa'],
data_basic['wlan_pc'])
#等待3分钟
time.sleep(240)
#判断AP是否依然连接
result = subprocess.check_output("iw dev %s link" %
data_basic['wlan_pc'],
shell=True)
print result
tmp1.dhcp_release_wlan(data_basic['wlan_pc'])
#断开无线网卡的连接
tmp.disconnect_ap()
#释放被禁的客户端
client_mac = tmp.get_wlan_mac(data_basic['wlan_pc'])
tmp.release_restrict_mac(client_mac)
time.sleep(60)
self.assertIn("Not connected.", result)
def test_004_check_connection_time_d_function(self):
u"""Connection Time单位选择d功能测试（Enabled勾选）(testlink_ID:1501)"""
log.debug("004")
tmp = TimePolicyBusiness(self.s)
# #断开无线网卡的连接
# tmp.disconnect_ap()
# #释放被禁的客户端
# client_mac = tmp.get_wlan_mac(data_basic['wlan_pc'])
# tmp.release_restrict_mac(client_mac)
# time.sleep(60)
#新增策略time policy3,连接时间1d，重置时间每周周一的23点
data_dict = {
'status': 1,
'reconnectType': 2,
'resetDay': 1,
'resetHour': "23",
'hour': "24",
'resetTimeType': "AM",
'timezone': "Etc/GMT",
'connectionTimeMap': {
'd': "1",
'h': "0",
'm': "0"
},
'connectionTimeoutMap': {
'd': "",
'h': "",
'm': ""
}
}
tmp.add_timepolicy("time policy3", data_dict)
#获取时间策略的id
timepolicy_id = tmp.get_timepolicy_id("time policy3")
#修改ssid1的ssid，并开启时间策略，并选择time policy3
tmp1 = SSIDSBusiness(self.s)
encry_dict = {
'ssid_encryption': "3",
'ssid_wpa_encryption': "0",
'ssid_wpa_key_mode': "0",
'ssid_wpa_key': data_wireless['short_wpa']
}
data_dict1 = {'ssid_timed_client_policy': "%s" % timepolicy_id}
tmp1.edit_ssid(data_ap['7600_mac'], data_wireless['all_ssid'],
encry_dict, data_dict1)
time.sleep(120)
#先修改ap的系统时间为2018-08-08 10:00:00
tmp2 = SettingsBusiness(self.s)
ssh_pwd = tmp2.get_ssh_pwd()
ssh = SSH(data_basic['7600_ip'], ssh_pwd)
ssh.ssh_cmd(data_basic['sshUser'], "date 201808081000")
#无线网卡连接
tmp.connect_DHCP_WPA_AP(data_wireless['all_ssid'],
data_wireless['short_wpa'],
data_basic['wlan_pc'])
#再修改ap的系统时间为2018-08-09 10:00:00
ssh.ssh_cmd(data_basic['sshUser'], "date 201808091000")
#等待3分钟
time.sleep(180)
#判断AP是否依然连接
result = subprocess.check_output("iw dev %s link" %
data_basic['wlan_pc'],
shell=True)
print result
#释放无线网卡的ip
tmp.dhcp_release_wlan(data_basic['wlan_pc'])
#断开无线网卡的连接
tmp.disconnect_ap()
#释放被禁的客户端
client_mac = tmp.get_wlan_mac(data_basic['wlan_pc'])
tmp.release_restrict_mac(client_mac)
time.sleep(60)
self.assertIn("Not connected.", result)
def setUp(self):
self.s = requests.session()
tmp = SettingsBusiness(self.s)
#使用用户名密码，带着cookie登录cloud，并返回响应数据
tmp.webLogin(data_basic['cloud_user'], data_basic['cloud_pwd'])