def run(self, refant=[], antsel=[], uvrange='', fluxname='', fluxname_full='', band='', spw0='', spw1='', flaglist=[]):
""" Run calibration pipeline. Assumes L-band.
refant is list of antenna name strings (e.g., ['ea10']). default is to calculate based on distance from array center.
antsel is list of ants to use (or reject) (e.g., ['!ea08'])
uvrange is string giving uvrange (e.g., '<5klambda')
fluxname, fluxname_full, and band are used to find flux calibrator info (e.g., '3C48', '0137+331=3C48', 'L').
spw0 is spw selection for gain cal before bp cal (e.g., '0~1:60~75')
spw1 is spw selection for gain cal after bp cal (e.g., '0~1:6~122')
flaglist is the list of flag commands (e.g., ["mode='unflag'", "mode='shadow'", "mode='manual' antenna='ea11'"])
"""
os.chdir(self.workdir)
if not len(refant):
refant = self.find_refants()
antposname = self.fileroot + '.antpos' # antpos
delayname = self.fileroot + '.delay' # delay cal
g0name = self.fileroot + '.g0' # initial gain correction before bp
b1name = self.fileroot + '.b1' # bandpass file
g1name = self.fileroot + '.g1' # gain cal per scan
g2name = self.fileroot + '.g2' # flux scale applied
# overload auto detected flux cal info, if desired
if fluxname:
self.fluxname = fluxname
if band:
self.band = band
if fluxname_full:
self.fluxname_full = fluxname
# if flux calibrator available, use its model
if self.fluxname and self.band:
if self.band == 'P':
calband = 'L'
else:
calband = self.band
fluxmodel = '/home/casa/packages/RHEL5/release/casapy-41.0.24668-001-64b/data/nrao/VLA/CalModels/' + self.fluxname + '_' + calband + '.im'
else:
fluxmodel = ''
# set up MS file
msfile = self.genms()
# flag data
if flaglist:
self.flagdata(msfile, flaglist=flaglist)
elif os.path.exists(os.path.join(self.workdir, 'flags.txt')):
self.flagdata(msfile, flagfile=os.path.join(self.workdir, 'flags.txt'))
else:
print 'No flagging.'
# Calibrate!
if fluxmodel:
if not os.path.exists(g0name):
print 'Applying flux model for BP calibrator...'
cfg = tl.SetjyConfig()
cfg.vis = msfile
cfg.scan = self.bpstr
cfg.modimage = fluxmodel
cfg.standard = 'Perley-Butler 2010' # for some reason 2013 standard can't find 3C48
tl.setjy(cfg)
print 'Starting initial gain cal...'
cfg = tl.GaincalConfig()
cfg.vis = msfile
cfg.caltable = g0name
cfg.gaintable = []
cfg.scan = self.bpstr
cfg.gaintype = 'G'
cfg.solint = 'inf'
cfg.spw = spw0
cfg.refant = refant
cfg.minsnr = 5.
cfg.calmode = 'p'
cfg.antenna = antsel
cfg.uvrange = uvrange
tl.gaincal(cfg)
else:
print '%s exists' % g0name
if not os.path.exists(b1name):
print 'Starting bp cal...'
cfg = tl.GaincalConfig()
cfg.vis = msfile
cfg.caltable = b1name
cfg.gaintable = [g0name]
cfg.scan = self.bpstr
cfg.spw = spw1
cfg.gaintype = 'BPOLY'
cfg.degamp = 5
cfg.degphase = 2
cfg.maskedge = 6
cfg.solint = 'inf'
cfg.combine = ['scan']
cfg.solnorm = True
cfg.refant = refant
cfg.antenna = antsel
cfg.uvrange = uvrange
tl.gaincal(cfg)
else:
print '%s exists' % b1name
if not os.path.exists(g1name) or not os.path.exists(g2name):
print 'Starting gain cal...'
cfg = tl.GaincalConfig()
cfg.vis = msfile
cfg.caltable = g1name
cfg.gaintable = [b1name]
cfg.scan = self.allstr
cfg.gaintype = 'G'
cfg.solint = 'inf'
cfg.spw = spw1
cfg.refant = refant
cfg.minsnr = 5.
cfg.calmode='ap'
cfg.antenna = antsel
cfg.uvrange = uvrange
tl.gaincal(cfg)
print 'Transferring flux scale...'
cfg = tl.FluxscaleConfig()
cfg.vis = msfile
cfg.caltable = g1name
cfg.fluxtable = g2name
cfg.reference = self.fluxname_full
tl.fluxscale(cfg)
else:
print 'either %s or %s exist' % (g1name, g2name)
else: # without fluxscale
if not os.path.exists(g0name):
print 'Starting initial gain cal...'
cfg = tl.GaincalConfig()
cfg.vis = msfile
cfg.caltable = g0name
cfg.gaintable = []
cfg.scan = self.bpstr
cfg.gaintype = 'G'
cfg.solint = 'inf'
cfg.spw = spw0
cfg.refant = refant
cfg.minsnr = 5.
cfg.calmode = 'p'
cfg.antenna = antsel
cfg.uvrange = uvrange
tl.gaincal(cfg)
else:
print '%s exists' % g0name
if not os.path.exists(b1name):
print 'Starting bp cal...'
cfg = tl.GaincalConfig()
cfg.vis = msfile
cfg.caltable = b1name
cfg.gaintable = [g0name]
cfg.scan = self.bpstr
cfg.spw = spw1
cfg.gaintype = 'BPOLY'
cfg.degamp = 5
cfg.degphase = 2
cfg.maskedge = 6
cfg.solint = 'inf'
cfg.combine = ['scan']
cfg.solnorm = True
cfg.refant = refant
cfg.antenna = antsel
cfg.uvrange = uvrange
tl.gaincal(cfg)
else:
print '%s exists' % b1name
if not os.path.exists(g1name):
print 'Starting gain cal...'
cfg = tl.GaincalConfig()
cfg.vis = msfile
cfg.caltable = g1name
cfg.gaintable = [b1name]
cfg.scan = self.allstr
cfg.gaintype = 'G'
cfg.solint = 'inf'
cfg.spw = spw1
cfg.refant = refant
cfg.minsnr = 5.
cfg.calmode='ap'
cfg.antenna = antsel
cfg.uvrange = uvrange
tl.gaincal(cfg)
else:
print '%s exists' % g1name
return 0
def run(self,
refant=[],
antsel=[],
uvrange='',
fluxname='',
fluxname_full='',
band='',
spw0='',
spw1='',
flaglist=[]):
""" Run calibration pipeline. Assumes L-band.
refant is list of antenna name strings (e.g., ['ea10']). default is to calculate based on distance from array center.
antsel is list of ants to use (or reject) (e.g., ['!ea08'])
uvrange is string giving uvrange (e.g., '<5klambda')
fluxname, fluxname_full, and band are used to find flux calibrator info (e.g., '3C48', '0137+331=3C48', 'L').
spw0 is spw selection for gain cal before bp cal (e.g., '0~1:60~75')
spw1 is spw selection for gain cal after bp cal (e.g., '0~1:6~122')
flaglist is the list of flag commands (e.g., ["mode='unflag'", "mode='shadow'", "mode='manual' antenna='ea11'"])
"""
os.chdir(self.workdir)
if not len(refant):
refant = self.find_refants()
antposname = self.fileroot + '.antpos' # antpos
delayname = self.fileroot + '.delay' # delay cal
g0name = self.fileroot + '.g0' # initial gain correction before bp
b1name = self.fileroot + '.b1' # bandpass file
g1name = self.fileroot + '.g1' # gain cal per scan
g2name = self.fileroot + '.g2' # flux scale applied
# overload auto detected flux cal info, if desired
if fluxname:
self.fluxname = fluxname
if band:
self.band = band
if fluxname_full:
self.fluxname_full = fluxname
# if flux calibrator available, use its model
if self.fluxname and self.band:
if self.band == 'P':
calband = 'L'
else:
calband = self.band
fluxmodel = '/home/casa/packages/RHEL5/release/casapy-41.0.24668-001-64b/data/nrao/VLA/CalModels/' + self.fluxname + '_' + calband + '.im'
else:
fluxmodel = ''
# set up MS file
msfile = self.genms()
# flag data
if flaglist:
self.flagdata(msfile, flaglist=flaglist)
elif os.path.exists(os.path.join(self.workdir, 'flags.txt')):
self.flagdata(msfile,
flagfile=os.path.join(self.workdir, 'flags.txt'))
else:
print 'No flagging.'
# Calibrate!
if fluxmodel:
if not os.path.exists(g0name):
print 'Applying flux model for BP calibrator...'
cfg = tl.SetjyConfig()
cfg.vis = msfile
cfg.scan = self.bpstr
cfg.modimage = fluxmodel
cfg.standard = 'Perley-Butler 2010' # for some reason 2013 standard can't find 3C48
tl.setjy(cfg)
print 'Starting initial gain cal...'
cfg = tl.GaincalConfig()
cfg.vis = msfile
cfg.caltable = g0name
cfg.gaintable = []
cfg.scan = self.bpstr
cfg.gaintype = 'G'
cfg.solint = 'inf'
cfg.spw = spw0
cfg.refant = refant
cfg.minsnr = 5.
cfg.calmode = 'p'
cfg.antenna = antsel
cfg.uvrange = uvrange
tl.gaincal(cfg)
else:
print '%s exists' % g0name
if not os.path.exists(b1name):
print 'Starting bp cal...'
cfg = tl.GaincalConfig()
cfg.vis = msfile
cfg.caltable = b1name
cfg.gaintable = [g0name]
cfg.scan = self.bpstr
cfg.spw = spw1
cfg.gaintype = 'BPOLY'
cfg.degamp = 5
cfg.degphase = 2
cfg.maskedge = 6
cfg.solint = 'inf'
cfg.combine = ['scan']
cfg.solnorm = True
cfg.refant = refant
cfg.antenna = antsel
cfg.uvrange = uvrange
tl.gaincal(cfg)
else:
print '%s exists' % b1name
if not os.path.exists(g1name) or not os.path.exists(g2name):
print 'Starting gain cal...'
cfg = tl.GaincalConfig()
cfg.vis = msfile
cfg.caltable = g1name
cfg.gaintable = [b1name]
cfg.scan = self.allstr
cfg.gaintype = 'G'
cfg.solint = 'inf'
cfg.spw = spw1
cfg.refant = refant
cfg.minsnr = 5.
cfg.calmode = 'ap'
cfg.antenna = antsel
cfg.uvrange = uvrange
tl.gaincal(cfg)
print 'Transferring flux scale...'
cfg = tl.FluxscaleConfig()
cfg.vis = msfile
cfg.caltable = g1name
cfg.fluxtable = g2name
cfg.reference = self.fluxname_full
tl.fluxscale(cfg)
else:
print 'either %s or %s exist' % (g1name, g2name)
else: # without fluxscale
if not os.path.exists(g0name):
print 'Starting initial gain cal...'
cfg = tl.GaincalConfig()
cfg.vis = msfile
cfg.caltable = g0name
cfg.gaintable = []
cfg.scan = self.bpstr
cfg.gaintype = 'G'
cfg.solint = 'inf'
cfg.spw = spw0
cfg.refant = refant
cfg.minsnr = 5.
cfg.calmode = 'p'
cfg.antenna = antsel
cfg.uvrange = uvrange
tl.gaincal(cfg)
else:
print '%s exists' % g0name
if not os.path.exists(b1name):
print 'Starting bp cal...'
cfg = tl.GaincalConfig()
cfg.vis = msfile
cfg.caltable = b1name
cfg.gaintable = [g0name]
cfg.scan = self.bpstr
cfg.spw = spw1
cfg.gaintype = 'BPOLY'
cfg.degamp = 5
cfg.degphase = 2
cfg.maskedge = 6
cfg.solint = 'inf'
cfg.combine = ['scan']
cfg.solnorm = True
cfg.refant = refant
cfg.antenna = antsel
cfg.uvrange = uvrange
tl.gaincal(cfg)
else:
print '%s exists' % b1name
if not os.path.exists(g1name):
print 'Starting gain cal...'
cfg = tl.GaincalConfig()
cfg.vis = msfile
cfg.caltable = g1name
cfg.gaintable = [b1name]
cfg.scan = self.allstr
cfg.gaintype = 'G'
cfg.solint = 'inf'
cfg.spw = spw1
cfg.refant = refant
cfg.minsnr = 5.
cfg.calmode = 'ap'
cfg.antenna = antsel
cfg.uvrange = uvrange
tl.gaincal(cfg)
else:
print '%s exists' % g1name
return 0