def act(controller, bundle, options):
context = tea.get_context(controller)
snippet = tea.get_option(options, 'snippet', '')
maintain_selection = tea.get_option(options, 'maintain_selection', False)
text, range = tea.selection_and_range(context)
snippet = tea.indent_snippet(context, snippet, range)
snippet = tea.clean_line_endings(context, snippet)
# Set up target selection
sel_loc = snippet.find('$SELECTED_TEXT')
cursor_loc = snippet.find('$0')
if maintain_selection:
select_range = tea.new_range(sel_loc + range.location, range.length)
elif cursor_loc != -1:
select_range = tea.new_range(snippet.find('$0') + range.location, 0)
else:
select_range = None
snippet = snippet.replace('$SELECTED_TEXT', text)
snippet = snippet.replace('$0', '')
if select_range is not None:
tea.insert_text_and_select(context, snippet, range, select_range)
else:
tea.insert_text(context, snippet, range)
def act(controller, bundle, options):
'''
Required action method
input dictates what should be trimmed:
- None (default): falls back to alternate
- selection: ignores lines if they exist, just trims selection
- selected_lines: each line in the selection
alternate dictates what to fall back on
- None (default): will do nothing if input is blank
- line: will trim the line the caret is on
- all_lines: all lines in the document
trim dictates what part of the text should be trimmed:
- both (default)
- start
- end
If respect_indent is True, indent characters (as defined in preferences)
at the beginning of the line will be left untouched.
'''
context = tea.get_context(controller)
input = tea.get_option(options, 'input')
alternate = tea.get_option(options, 'alternate')
trim = tea.get_option(options, 'trim', 'both')
respect_indent = tea.get_option(options, 'respect_indent', False)
discard_empty = tea.get_option(options, 'discard_empty', False)
# Since input is always a selection of some kind, check if we have one
range = tea.get_range(context)
if (range.length == 0) or input is None:
if alternate.lower() == 'line':
text, range = tea.get_line(context)
text = tea.trim(context, text, False, trim, respect_indent, True, discard_empty)
elif alternate.lower() == 'all_lines':
range = tea.new_range(0, context.string().length())
text = tea.get_selection(context, range)
text = tea.trim(context, text, True, trim, respect_indent, True, discard_empty)
else:
if input.lower() == 'selected_lines':
parse_lines = True
else:
parse_lines = False
text = tea.get_selection(context, range)
text = tea.trim(context, text, parse_lines, trim, respect_indent, True, discard_empty)
tea.insert_text(context, text, range)
new_range = tea.new_range(range.location, len(text))
tea.set_selected_range(context, new_range)
def act(controller, bundle, options):
# Grab the context
context = tea.get_context(controller)
image = find_image(context)
if image:
size = get_image_size(context, image['tag'])
if size:
new_tag = replace_or_append(image['tag'], 'width', size['width'])
new_tag = replace_or_append(new_tag, 'height', size['height'])
rng = tea.get_range(context)
tea.insert_text(context, new_tag, tea.new_range(image['start'], image['end'] - image['start']))
tea.set_selected_range(context, rng)
return True
return False
def replace_content(self, value, start=None, end=None, no_indent=False): """ Replace editor's content or it's part (from <code>start</code> to <code>end</code> index). If <code>value</code> contains <code>caret_placeholder</code>, the editor will put caret into this position. If you skip <code>start</code> and <code>end</code> arguments, the whole target's content will be replaced with <code>value</code>. If you pass <code>start</code> argument only, the <code>value</code> will be placed at <code>start</code> string index of current content. If you pass <code>start</code> and <code>end</code> arguments, the corresponding substring of current target's content will be replaced with <code>value</code> @param value: Content you want to paste @type value: str @param start: Start index of editor's content @type start: int @param end: End index of editor's content @type end: int """ if start is None: start = 0 if end is None: end = len(self.get_content()) rng = tea.new_range(start, end - start) value = self.add_placeholders(value) if not no_indent: value = zencoding.utils.pad_string(value, get_line_padding(self.get_current_line())) sel_start, sel_end, value = self.preprocess_text(value) if sel_start is not None: select_range = tea.new_range(sel_start + rng.location, sel_end - sel_start) tea.insert_text_and_select(self._context, value, rng, select_range) else: tea.insert_text(self._context, value, rng)
def act(controller, bundle, options):
context = tea.get_context(controller)
# Get the options
alpha_numeric = tea.get_option(options, 'alpha_numeric', True)
extra_characters = tea.get_option(options, 'extra_characters', '_-')
bidirectional = tea.get_option(options, 'bidirectional', True)
snippet = tea.get_option(options, 'snippet', '<$SELECTED_TEXT>$0</$WORD>')
mode = tea.get_option(options, 'mode', '')
# Fetch the word
range = context.selectedRange()
word, new_range = tea.get_word_or_selection(context, range, alpha_numeric,
extra_characters, bidirectional)
if word == '':
# No word, so nothing further to do
return False
# If we're using $WORD, make sure the word is just a word
if snippet.find('$WORD') >= 0:
fullword = word
word = tea.parse_word(word)
if word is None:
word = ''
else:
fullword = word
# Process that sucker!
if mode == 'zen' and fullword.find(' ') < 0:
# Explicitly load zen settings
zen_settings = settings_loader.load_settings()
zen_core.update_settings(zen_settings)
# Set up the config variables
zen_core.newline = tea.get_line_ending(context)
zen_settings['variables']['indentation'] = tea.get_indentation_string(context)
# This allows us to use smart incrementing tab stops in zen snippets
point_ix = [0]
def place_ins_point(text):
if not point_ix[0]:
point_ix[0] += 1
return '$0'
else:
return ''
zen_core.insertion_point = place_ins_point
# Determine doctype as best we can based on file extension
doc_type = tea.get_zen_doctype(context)
# Prepare the snippet
snippet = zen_core.expand_abbreviation(fullword, doc_type, 'xhtml')
elif mode == 'zen' and tea.is_selfclosing(word):
# Self-closing, so construct the snippet from scratch
snippet = '<' + fullword
if fullword == word and not fullword in ['br', 'hr']:
snippet += ' $0 />'
else:
snippet += ' />$0'
# Indent the snippet
snippet = tea.indent_snippet(context, snippet, new_range)
snippet = tea.clean_line_endings(context, snippet)
# Special replacement in case we're using $WORD
snippet = snippet.replace('$WORD', word)
snippet = snippet.replace('$SELECTED_TEXT', fullword)
cursor_loc = snippet.find('$0')
if cursor_loc != -1:
select_range = tea.new_range(cursor_loc + new_range.location, 0)
snippet = snippet.replace('$0', '')
tea.insert_text_and_select(context, snippet, new_range, select_range)
else:
tea.insert_text(context, snippet, new_range)
def wrap(self, context, abbr, profile_name='xhtml'):
# Set up the config variables
zen_settings = settings_loader.load_settings()
zen.update_settings(zen_settings)
zen.newline = self.safe_str(tea.get_line_ending(context))
zen_settings['variables']['indentation'] = self.safe_str(tea.get_indentation_string(context))
# This allows us to use smart incrementing tab stops in zen snippets
point_ix = [0]
def place_ins_point(text):
if not point_ix[0]:
point_ix[0] += 1
return '$0'
else:
return ''
zen.insertion_point = place_ins_point
text, rng = tea.selection_and_range(context)
if not text:
# no selection, find matching tag
content = context.string()
start, end = html_matcher.match(content, rng.location)
if start is None:
# nothing to wrap
return False
def is_space(char):
return char.isspace() or char in r'\n\r'
# narrow down selection until first non-space character
while start < end:
if not is_space(content[start]):
break
start += 1
while end > start:
end -= 1
if not is_space(content[end]):
end += 1
break
rng = tea.new_range(start, end - start)
text = tea.get_selection(context, rng)
# Fetch the doctype based on file extension
doc_type = tea.get_zen_doctype(context)
text = self.unindent(context, text)
# Damn Python's encodings! Have to convert string to ascii before wrapping
# and then back to utf-8
result = zen.wrap_with_abbreviation(self.safe_str(abbr), self.safe_str(text), doc_type, profile_name)
result = unicode(result, 'utf-8')
result = tea.indent_snippet(context, result, rng)
result = tea.clean_line_endings(context, result)
cursor_loc = result.find('$0')
if cursor_loc != -1:
select_range = tea.new_range(cursor_loc + rng.location, 0)
result = result.replace('$0', '')
tea.insert_text_and_select(context, result, rng, select_range)
else:
tea.insert_text(context, result, rng)
