def analyze_subsequent_layers(image_obj, shell, master_list, redo):
# get packages for subsequent layers
curr_layer = 1
while curr_layer < len(image_obj.layers):
if not common.load_from_cache(image_obj.layers[curr_layer], redo):
# get commands that created the layer
# for docker images this is retrieved from the image history
command_list = dhelper.get_commands_from_history(
image_obj.layers[curr_layer])
if command_list:
# mount diff layers from 0 till the current layer
target = mount_overlay_fs(image_obj, curr_layer)
# mount dev, sys and proc after mounting diff layers
rootfs.prep_rootfs(target)
# for each command look up the snippet library
for command in command_list:
pkg_listing = command_lib.get_package_listing(command.name)
if isinstance(pkg_listing, str):
common.add_base_packages(image_obj.layers[curr_layer],
pkg_listing, shell)
else:
common.add_snippet_packages(image_obj.layers[curr_layer],
command, pkg_listing, shell)
if command_list:
rootfs.undo_mount()
rootfs.unmount_rootfs()
# update the master list
common.update_master_list(master_list, image_obj.layers[curr_layer])
curr_layer = curr_layer + 1
def analyze_subsequent_layers(
image_obj,
shell,
master_list,
redo,
dfobj=None, # noqa: R0912,R0913
dfile_lock=False):
# get packages for subsequent layers
curr_layer = 1
while curr_layer < len(image_obj.layers): # pylint:disable=too-many-nested-blocks
# if there is no shell, try to see if it exists in the current layer
if not shell:
shell = common.get_shell(image_obj.layers[curr_layer])
if not common.load_from_cache(image_obj.layers[curr_layer], redo):
# get commands that created the layer
# for docker images this is retrieved from the image history
command_list = dhelper.get_commands_from_history(
image_obj.layers[curr_layer])
if command_list:
# mount diff layers from 0 till the current layer
target = mount_overlay_fs(image_obj, curr_layer)
# mount dev, sys and proc after mounting diff layers
rootfs.prep_rootfs(target)
# for each command look up the snippet library
for command in command_list:
pkg_listing = command_lib.get_package_listing(command.name)
if isinstance(pkg_listing, str):
try:
common.add_base_packages(image_obj.layers[curr_layer],
pkg_listing, shell)
except KeyboardInterrupt:
logger.critical(errors.keyboard_interrupt)
abort_analysis()
else:
try:
common.add_snippet_packages(
image_obj.layers[curr_layer], command, pkg_listing,
shell)
except KeyboardInterrupt:
logger.critical(errors.keyboard_interrupt)
abort_analysis()
# pin any installed packages to a locked dockerfile.
if dfile_lock:
# collect list of RUN commands that could install pkgs
run_dict = d_file.get_run_layers(dfobj)
for package in image_obj.layers[curr_layer].packages:
# check that package is in current dfobj RUN line
if d_file.package_in_dockerfile(
run_dict[curr_layer - 1], package.name):
d_file.expand_package(
run_dict[curr_layer - 1], package.name,
package.version,
command_lib.check_pinning_separator(
pkg_listing))
if command_list:
rootfs.undo_mount()
rootfs.unmount_rootfs()
# update the master list
common.update_master_list(master_list, image_obj.layers[curr_layer])
curr_layer = curr_layer + 1
def analyze_docker_image(image_obj, redo=False, dockerfile=False): # pylint: disable=too-many-locals
'''Given a DockerImage object, for each layer, retrieve the packages, first
looking up in cache and if not there then looking up in the command
library. For looking up in command library first mount the filesystem
and then look up the command library for commands to run in chroot'''
# find the layers that are imported
if dockerfile:
dhelper.set_imported_layers(image_obj)
# add notices for each layer if it is imported
image_setup(image_obj)
shell = ''
# set up empty master list of packages
master_list = []
# find the binary by mounting the base layer
target = rootfs.mount_base_layer(image_obj.layers[0].tar_file)
binary = common.get_base_bin()
# set up a notice origin referring to the base command library listing
origin_command_lib = formats.invoking_base_commands
# set up a notice origin for the first layer
origin_first_layer = 'Layer: ' + image_obj.layers[0].fs_hash[:10]
# find the shell to invoke commands in
shell, _ = command_lib.get_image_shell(
command_lib.get_base_listing(binary))
if not shell:
# add a warning notice for no shell in the command library
logger.warning('No shell listing in command library. '
'Using default shell')
no_shell_message = errors.no_shell_listing.format(
binary=binary, default_shell=constants.shell)
image_obj.layers[0].origins.add_notice_to_origins(
origin_command_lib, Notice(no_shell_message, 'warning'))
# add a hint notice to add the shell to the command library
add_shell_message = errors.no_listing_for_base_key.format(
listing_key='shell')
image_obj.layers[0].origins.add_notice_to_origins(
origin_command_lib, Notice(add_shell_message, 'hint'))
shell = constants.shell
# only extract packages if there is a known binary and the layer is not
# cached
if binary:
if not common.load_from_cache(image_obj.layers[0], redo):
# get the packages of the first layer
rootfs.prep_rootfs(target)
common.add_base_packages(image_obj.layers[0], binary, shell)
# unmount proc, sys and dev
rootfs.undo_mount()
else:
no_base = errors.unrecognized_base.format(
image_name=image_obj.name, image_tag=image_obj.tag)
logger.warning(no_base)
image_obj.layers[0].origins.add_notice_to_origins(
origin_first_layer, Notice(no_base, 'warning'))
# no binary means there is no shell so set to default shell
logger.warning('Unknown filesystem. Using default shell')
shell = constants.shell
# unmount the first layer
rootfs.unmount_rootfs()
# populate the master list with all packages found in the first layer
for p in image_obj.layers[0].packages:
master_list.append(p)
# get packages for subsequent layers
curr_layer = 1
while curr_layer < len(image_obj.layers):
if not common.load_from_cache(image_obj.layers[curr_layer], redo):
# get commands that created the layer
# for docker images this is retrieved from the image history
command_list = dhelper.get_commands_from_history(
image_obj.layers[curr_layer])
if command_list:
# mount diff layers from 0 till the current layer
target = mount_overlay_fs(image_obj, curr_layer)
# mount dev, sys and proc after mounting diff layers
rootfs.prep_rootfs(target)
# for each command look up the snippet library
for command in command_list:
pkg_listing = command_lib.get_package_listing(command.name)
if isinstance(pkg_listing, str):
common.add_base_packages(
image_obj.layers[curr_layer], pkg_listing, shell)
else:
common.add_snippet_packages(
image_obj.layers[curr_layer], command, pkg_listing,
shell)
if command_list:
rootfs.undo_mount()
rootfs.unmount_rootfs()
# update the master list
common.update_master_list(master_list, image_obj.layers[curr_layer])
curr_layer = curr_layer + 1
common.save_to_cache(image_obj)
def analyze_subsequent_layers(
image_obj,
shell,
master_list,
redo,
dfobj=None, # noqa: R0912,R0913
dfile_lock=False,
driver=None):
# get packages for subsequent layers
curr_layer = 1
work_dir = None
while curr_layer < len(image_obj.layers): # pylint:disable=too-many-nested-blocks
# make a notice for each layer
origin_next_layer = 'Layer {}'.format(
image_obj.layers[curr_layer].layer_index)
# check if this is an empty layer
if common.is_empty_layer(image_obj.layers[curr_layer]):
# we continue to the next layer
logger.warning(errors.empty_layer)
image_obj.layers[curr_layer].origins.add_notice_to_origins(
origin_next_layer, Notice(errors.empty_layer, 'warning'))
curr_layer = curr_layer + 1
continue
# If workdir changes, update value accordingly
# so we can later execute base.yml commands from the workdir.
if image_obj.layers[curr_layer].get_layer_workdir() is not None:
work_dir = image_obj.layers[curr_layer].get_layer_workdir()
# if there is no shell, try to see if it exists in the current layer
if not shell:
shell = common.get_shell(image_obj.layers[curr_layer])
if not common.load_from_cache(image_obj.layers[curr_layer], redo):
# get commands that created the layer
# for docker images this is retrieved from the image history
command_list = dhelper.get_commands_from_history(
image_obj.layers[curr_layer])
if command_list:
# mount diff layers from 0 till the current layer
target = mount_overlay_fs(image_obj, curr_layer, driver)
# mount dev, sys and proc after mounting diff layers
rootfs.prep_rootfs(target)
# for each command look up the snippet library
for command in command_list:
pkg_listing = command_lib.get_package_listing(command.name)
# get list of environment variables
envs = dhelper.get_env_vars(image_obj)
if isinstance(pkg_listing, str):
try:
common.add_base_packages(image_obj.layers[curr_layer],
pkg_listing, shell, work_dir,
envs)
except KeyboardInterrupt:
logger.critical(errors.keyboard_interrupt)
abort_analysis()
else:
try:
common.add_snippet_packages(
image_obj.layers[curr_layer], command, pkg_listing,
shell, work_dir, envs)
except KeyboardInterrupt:
logger.critical(errors.keyboard_interrupt)
abort_analysis()
# pin any installed packages to a locked dockerfile.
if dfile_lock:
# collect list of RUN commands that could install pkgs
run_dict = d_file.get_run_layers(dfobj)
# use the run_dict to get list of packages being installed
install_list = d_file.get_install_packages(
run_dict[curr_layer - 1])
for install_pkg in install_list:
for layer_pkg in image_obj.layers[curr_layer].packages:
if install_pkg == layer_pkg.name:
# dockerfile package in layer, let's pin it
d_file.expand_package(
run_dict[curr_layer - 1], install_pkg,
layer_pkg.version,
command_lib.check_pinning_separator(
pkg_listing))
if command_list:
rootfs.undo_mount()
rootfs.unmount_rootfs()
# update the master list
common.update_master_list(master_list, image_obj.layers[curr_layer])
curr_layer = curr_layer + 1