def run_test(self):
        relayfee = self.nodes[0].getnetworkinfo()['relayfee']

        txids = []
        utxo_groups = 4
        utxos = create_confirmed_utxos(self.nodes[0], 1 + 30 * utxo_groups)

        # create a mempool tx that will be evicted
        us0 = utxos.pop()
        inputs = [{"txid": us0["txid"], "vout": us0["vout"]}]
        outputs = {self.nodes[0].getnewaddress(): 0.0001}
        tx = self.nodes[0].createrawtransaction(inputs, outputs)
        # specifically fund this tx with low fee
        self.nodes[0].settxfee(relayfee)
        txF = self.nodes[0].fundrawtransaction(tx)
        # return to automatic fee selection
        self.nodes[0].settxfee(0)
        txFS = self.nodes[0].signrawtransaction(txF['hex'])
        txid = self.nodes[0].sendrawtransaction(txFS['hex'])

        for i in range(utxo_groups):
            txids.append([])
            txids[i] = send_big_transactions(self.nodes[0],
                                             utxos[30 * i:30 * i + 30], 30,
                                             10 * (i + 1))

        # by now, the tx should be evicted, check confirmation state
        assert (txid not in self.nodes[0].getrawmempool())
        txdata = self.nodes[0].gettransaction(txid)
        assert (txdata['confirmations'] == 0)  # confirmation should still be 0
Esempio n. 2
0
    def run_test(self):
        relayfee = self.nodes[0].getnetworkinfo()['relayfee']

        self.log.info('Check that mempoolminfee is minrelytxfee')
        assert_equal(self.nodes[0].getmempoolinfo()['minrelaytxfee'],
                     Decimal('0.00001000'))
        assert_equal(self.nodes[0].getmempoolinfo()['mempoolminfee'],
                     Decimal('0.00001000'))

        txids = []
        utxo_groups = 4
        utxos = create_confirmed_utxos(self.nodes[0], 1 + 30 * utxo_groups)

        self.log.info('Create a mempool tx that will be evicted')
        us0 = utxos.pop()
        inputs = [{"txid": us0["txid"], "vout": us0["vout"]}]
        outputs = {self.nodes[0].getnewaddress(): 0.0001}
        tx = self.nodes[0].createrawtransaction(inputs, outputs)
        # specifically fund this tx with low fee
        self.nodes[0].settxfee(relayfee)
        txF = self.nodes[0].fundrawtransaction(tx)
        # return to automatic fee selection
        self.nodes[0].settxfee(0)
        txFS = self.nodes[0].signrawtransactionwithwallet(txF['hex'])
        txid = self.nodes[0].sendrawtransaction(txFS['hex'])

        for i in range(utxo_groups):
            txids.append([])
            txids[i] = send_big_transactions(self.nodes[0],
                                             utxos[30 * i:30 * i + 30], 30,
                                             10 * (i + 1))

        self.log.info('The tx should be evicted by now')
        assert txid not in self.nodes[0].getrawmempool()
        txdata = self.nodes[0].gettransaction(txid)
        # confirmation should still be 0
        assert txdata['confirmations'] == 0

        self.log.info('Check that mempoolminfee is larger than minrelytxfee')
        assert_equal(self.nodes[0].getmempoolinfo()['minrelaytxfee'],
                     Decimal('0.00001000'))
        assert_greater_than(self.nodes[0].getmempoolinfo()['mempoolminfee'],
                            Decimal('0.00001000'))

        self.log.info('Create a mempool tx that will not pass mempoolminfee')
        us0 = utxos.pop()
        inputs = [{"txid": us0["txid"], "vout": us0["vout"]}]
        outputs = {self.nodes[0].getnewaddress(): 0.0001}
        tx = self.nodes[0].createrawtransaction(inputs, outputs)
        # specifically fund this tx with a fee < mempoolminfee, >= than
        # minrelaytxfee
        txF = self.nodes[0].fundrawtransaction(tx, {'feeRate': relayfee})
        txFS = self.nodes[0].signrawtransactionwithwallet(txF['hex'])
        assert_raises_rpc_error(-26, "mempool min fee not met",
                                self.nodes[0].sendrawtransaction, txFS['hex'])
    def run_test(self):
        # Test `prioritisetransaction` required parameters
        assert_raises_rpc_error(-1, "prioritisetransaction",
                                self.nodes[0].prioritisetransaction)
        assert_raises_rpc_error(-1, "prioritisetransaction",
                                self.nodes[0].prioritisetransaction, '')
        assert_raises_rpc_error(-1, "prioritisetransaction",
                                self.nodes[0].prioritisetransaction, '', 0)

        # Test `prioritisetransaction` invalid extra parameters
        assert_raises_rpc_error(-1, "prioritisetransaction",
                                self.nodes[0].prioritisetransaction, '', 0, 0,
                                0)

        # Test `prioritisetransaction` invalid `txid`
        assert_raises_rpc_error(-1,
                                "txid must be hexadecimal string",
                                self.nodes[0].prioritisetransaction,
                                txid='foo',
                                fee_delta=0)

        # Test `prioritisetransaction` invalid `dummy`
        txid = '1d1d4e24ed99057e84c3f80fd8fbec79ed9e1acee37da269356ecea000000000'
        assert_raises_rpc_error(-1, "JSON value is not a number as expected",
                                self.nodes[0].prioritisetransaction, txid,
                                'foo', 0)
        assert_raises_rpc_error(
            -8,
            "Priority is no longer supported, dummy argument to prioritisetransaction must be 0.",
            self.nodes[0].prioritisetransaction, txid, 1, 0)

        # Test `prioritisetransaction` invalid `fee_delta`
        assert_raises_rpc_error(-1,
                                "JSON value is not an integer as expected",
                                self.nodes[0].prioritisetransaction,
                                txid=txid,
                                fee_delta='foo')

        self.relayfee = self.nodes[0].getnetworkinfo()['relayfee']

        utxo_count = 90
        utxos = create_confirmed_utxos(self.nodes[0], utxo_count)
        txids = []

        # Create 3 batches of transactions at 3 different fee rate levels
        range_size = utxo_count // 3
        for i in range(3):
            txids.append([])
            start_range = i * range_size
            end_range = start_range + range_size
            txids[i] = send_big_transactions(self.nodes[0],
                                             utxos[start_range:end_range],
                                             end_range - start_range,
                                             10 * (i + 1))

        # Make sure that the size of each group of transactions exceeds
        # LEGACY_MAX_BLOCK_SIZE -- otherwise the test needs to be revised to create
        # more transactions.
        mempool = self.nodes[0].getrawmempool(True)
        sizes = [0, 0, 0]
        for i in range(3):
            for j in txids[i]:
                assert j in mempool
                sizes[i] += mempool[j]['size']
            # Fail => raise utxo_count
            assert sizes[i] > LEGACY_MAX_BLOCK_SIZE

        # add a fee delta to something in the cheapest bucket and make sure it gets mined
        # also check that a different entry in the cheapest bucket is NOT mined
        self.nodes[0].prioritisetransaction(
            txid=txids[0][0],
            fee_delta=100 * self.nodes[0].calculate_fee_from_txid(txids[0][0]))

        self.nodes[0].generate(1)

        mempool = self.nodes[0].getrawmempool()
        self.log.info("Assert that prioritised transaction was mined")
        assert txids[0][0] not in mempool
        assert txids[0][1] in mempool

        confirmed_transactions = self.nodes[0].getblock(
            self.nodes[0].getbestblockhash())['tx']

        # Pull the highest fee-rate transaction from a block
        high_fee_tx = confirmed_transactions[1]

        # Something high-fee should have been mined!
        assert high_fee_tx is not None

        # Add a prioritisation before a tx is in the mempool (de-prioritising a
        # high-fee transaction so that it's now low fee).
        #
        # NOTE WELL: gettransaction returns the fee as a negative number and
        # as fractional coins. However, the prioritisetransaction expects a
        # number of satoshi to add or subtract from the actual fee.
        # Thus the conversation here is simply int(tx_fee*COIN) to remove all fees, and then
        # we add the minimum fee back.
        tx_fee = self.nodes[0].gettransaction(high_fee_tx)['fee']
        self.nodes[0].prioritisetransaction(
            txid=high_fee_tx,
            fee_delta=int(tx_fee * COIN) +
            self.nodes[0].calculate_fee_from_txid(high_fee_tx))

        # Add everything back to mempool
        self.nodes[0].invalidateblock(self.nodes[0].getbestblockhash())

        # Check to make sure our high fee rate tx is back in the mempool
        mempool = self.nodes[0].getrawmempool()
        assert high_fee_tx in mempool

        # Now verify the modified-high feerate transaction isn't mined before
        # the other high fee transactions. Keep mining until our mempool has
        # decreased by all the high fee size that we calculated above.
        while (self.nodes[0].getmempoolinfo()['bytes'] > sizes[0] + sizes[1]):
            self.nodes[0].generate(1)

        # High fee transaction should not have been mined, but other high fee rate
        # transactions should have been.
        mempool = self.nodes[0].getrawmempool()
        self.log.info(
            "Assert that de-prioritised transaction is still in mempool")
        assert high_fee_tx in mempool
        for x in txids[2]:
            if (x != high_fee_tx):
                assert x not in mempool

        # Create a free transaction.  Should be rejected.
        utxo_list = self.nodes[0].listunspent()
        assert len(utxo_list) > 0
        utxo = utxo_list[0]

        inputs = []
        outputs = {}
        inputs.append({"txid": utxo["txid"], "vout": utxo["vout"]})
        outputs[self.nodes[0].getnewaddress()] = utxo["amount"]
        raw_tx = self.nodes[0].createrawtransaction(inputs, outputs)
        tx_hex = self.nodes[0].signrawtransactionwithwallet(raw_tx)["hex"]
        tx_id = self.nodes[0].decoderawtransaction(tx_hex)["txid"]

        # This will raise an exception due to min relay fee not being met
        assert_raises_rpc_error(-26, "min relay fee not met (code 66)",
                                self.nodes[0].sendrawtransaction, tx_hex)
        assert tx_id not in self.nodes[0].getrawmempool()

        # This is a less than 1000-byte transaction, so just set the fee
        # to be the minimum for a 1000-byte transaction and check that it is
        # accepted.
        self.nodes[0].prioritisetransaction(txid=tx_id,
                                            fee_delta=int(self.relayfee *
                                                          COIN))

        self.log.info(
            "Assert that prioritised free transaction is accepted to mempool")
        assert_equal(self.nodes[0].sendrawtransaction(tx_hex), tx_id)
        assert tx_id in self.nodes[0].getrawmempool()

        # Test that calling prioritisetransaction is sufficient to trigger
        # getblocktemplate to (eventually) return a new block.
        mock_time = int(time.time())
        self.nodes[0].setmocktime(mock_time)
        template = self.nodes[0].getblocktemplate()
        self.nodes[0].prioritisetransaction(
            txid=tx_id, fee_delta=-int(self.relayfee * COIN))
        self.nodes[0].setmocktime(mock_time + 10)
        new_template = self.nodes[0].getblocktemplate()

        assert template != new_template
Esempio n. 4
0
    def run_test(self):
        self.relayfee = self.nodes[0].getnetworkinfo()['relayfee']

        utxo_count = 90
        utxos = create_confirmed_utxos(self.nodes[0], utxo_count)
        # our transactions are smaller than 100kb
        base_fee = self.relayfee * 100
        txids = []

        # Create 3 batches of transactions at 3 different fee rate levels
        range_size = utxo_count // 3
        for i in range(3):
            txids.append([])
            start_range = i * range_size
            end_range = start_range + range_size
            txids[i] = send_big_transactions(self.nodes[0],
                                             utxos[start_range:end_range],
                                             end_range - start_range,
                                             10 * (i + 1))

        # Make sure that the size of each group of transactions exceeds
        # LEGACY_MAX_BLOCK_SIZE -- otherwise the test needs to be revised to create
        # more transactions.
        mempool = self.nodes[0].getrawmempool(True)
        sizes = [0, 0, 0]
        for i in range(3):
            for j in txids[i]:
                assert (j in mempool)
                sizes[i] += mempool[j]['size']
            # Fail => raise utxo_count
            assert (sizes[i] > LEGACY_MAX_BLOCK_SIZE)

        # add a fee delta to something in the cheapest bucket and make sure it gets mined
        # also check that a different entry in the cheapest bucket is NOT mined (lower
        # the priority to ensure its not mined due to priority)
        self.nodes[0].prioritisetransaction(
            txids[0][0], 0,
            100 * self.nodes[0].calculate_fee_from_txid(txids[0][0]))
        self.nodes[0].prioritisetransaction(txids[0][1], -1e15, 0)

        self.nodes[0].generate(1)

        mempool = self.nodes[0].getrawmempool()
        self.log.info("Assert that prioritised transaction was mined")
        assert (txids[0][0] not in mempool)
        assert (txids[0][1] in mempool)

        confirmed_transactions = self.nodes[0].getblock(
            self.nodes[0].getbestblockhash())['tx']

        # Pull the highest fee-rate transaction from a block
        high_fee_tx = confirmed_transactions[1]

        # Something high-fee should have been mined!
        assert (high_fee_tx != None)

        # Add a prioritisation before a tx is in the mempool (de-prioritising a
        # high-fee transaction so that it's now low fee).
        #
        # NOTE WELL: gettransaction returns the fee as a negative number and
        # as fractional coins. However, the prioritisetransaction expects a
        # number of satoshi to add or subtract from the actual fee.
        # Thus the conversation here is simply int(tx_fee*COIN) to remove all fees, and then
        # we add the minimum fee back.
        tx_fee = self.nodes[0].gettransaction(high_fee_tx)['fee']
        self.nodes[0].prioritisetransaction(
            high_fee_tx, -1e15,
            int(tx_fee * COIN) +
            self.nodes[0].calculate_fee_from_txid(high_fee_tx))

        # Add everything back to mempool
        self.nodes[0].invalidateblock(self.nodes[0].getbestblockhash())

        # Check to make sure our high fee rate tx is back in the mempool
        mempool = self.nodes[0].getrawmempool()
        assert (high_fee_tx in mempool)

        # Now verify the modified-high feerate transaction isn't mined before
        # the other high fee transactions. Keep mining until our mempool has
        # decreased by all the high fee size that we calculated above.
        while (self.nodes[0].getmempoolinfo()['bytes'] > sizes[0] + sizes[1]):
            self.nodes[0].generate(1)

        # High fee transaction should not have been mined, but other high fee rate
        # transactions should have been.
        mempool = self.nodes[0].getrawmempool()
        self.log.info(
            "Assert that de-prioritised transaction is still in mempool")
        assert (high_fee_tx in mempool)
        for x in txids[2]:
            if (x != high_fee_tx):
                assert (x not in mempool)

        # Create a free, low priority transaction.  Should be rejected.
        utxo_list = self.nodes[0].listunspent()
        assert (len(utxo_list) > 0)
        utxo = utxo_list[0]

        inputs = []
        outputs = {}
        inputs.append({"txid": utxo["txid"], "vout": utxo["vout"]})
        outputs[self.nodes[0].getnewaddress()] = utxo["amount"] - self.relayfee
        raw_tx = self.nodes[0].createrawtransaction(inputs, outputs)
        tx_hex = self.nodes[0].signrawtransaction(raw_tx)["hex"]
        txid = self.nodes[0].sendrawtransaction(tx_hex)

        # A tx that spends an in-mempool tx has 0 priority, so we can use it to
        # test the effect of using prioritise transaction for mempool
        # acceptance
        inputs = []
        inputs.append({"txid": txid, "vout": 0})
        outputs = {}
        outputs[self.nodes[0].getnewaddress()] = utxo["amount"] - self.relayfee
        raw_tx2 = self.nodes[0].createrawtransaction(inputs, outputs)
        tx2_hex = self.nodes[0].signrawtransaction(raw_tx2)["hex"]
        tx2_id = self.nodes[0].decoderawtransaction(tx2_hex)["txid"]

        # This will raise an exception due to min relay fee not being met
        assert_raises_rpc_error(-26, "66: insufficient priority",
                                self.nodes[0].sendrawtransaction, tx2_hex)
        assert (tx2_id not in self.nodes[0].getrawmempool())

        # This is a less than 1000-byte transaction, so just set the fee
        # to be the minimum for a 1000 byte transaction and check that it is
        # accepted.
        self.nodes[0].prioritisetransaction(tx2_id, 0,
                                            int(self.relayfee * COIN))

        self.log.info(
            "Assert that prioritised free transaction is accepted to mempool")
        assert_equal(self.nodes[0].sendrawtransaction(tx2_hex), tx2_id)
        assert (tx2_id in self.nodes[0].getrawmempool())

        # Test that calling prioritisetransaction is sufficient to trigger
        # getblocktemplate to (eventually) return a new block.
        mock_time = int(time.time())
        self.nodes[0].setmocktime(mock_time)
        template = self.nodes[0].getblocktemplate()
        self.nodes[0].prioritisetransaction(txid, 0,
                                            -int(self.relayfee * COIN))
        self.nodes[0].setmocktime(mock_time + 10)
        new_template = self.nodes[0].getblocktemplate()

        assert (template != new_template)