def __init__(self, serial_port_name='mock'):
self.serial_port_name = serial_port_name
self.mocked_serial = SerialMock(self.serial_port_name, 0.25)
self.patcher = patch('serial.Serial',
return_value=self.mocked_serial).start()
class MockBGAPISerialDevice(object):
def __init__(self, serial_port_name='mock'):
self.serial_port_name = serial_port_name
self.mocked_serial = SerialMock(self.serial_port_name, 0.25)
self.patcher = patch('serial.Serial',
return_value=self.mocked_serial).start()
def stop(self):
self.patcher.stop()
@staticmethod
def _get_connection_status_flags_byte(flags):
flags_byte = 0x00
if 'connected' in flags:
flags_byte |= 0x01
if 'encrypted' in flags:
flags_byte |= 0x02
if 'completed' in flags:
flags_byte |= 0x04
if 'parameters_change' in flags:
flags_byte |= 0x08
return flags_byte
def stage_disconnected_by_remote(self, connection_handle=0x00):
# Stage ble_evt_connection_disconnected (terminated by remote user)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.connection_disconnected(connection_handle,
0x0213))
def stage_disconnect_packets(self,
connected,
fail,
connection_handle=0x00):
if connected:
if fail:
raise NotImplementedError()
# Stage ble_rsp_connection_disconnect (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.connection_disconnect(
connection_handle, 0x0000))
# Stage ble_evt_connection_disconnected (success by local user)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.connection_disconnected(
connection_handle, 0x0000))
else: # not connected always fails
# Stage ble_rsp_connection_disconnect (fail, not connected)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.connection_disconnect(
connection_handle, 0x0186))
def stage_run_packets(self, connection_handle=0x00):
# Stage ble_rsp_connection_disconnect (not connected, fail)
self.stage_disconnect_packets(False, True)
# Stage ble_rsp_gap_set_mode (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_set_mode(0x0000))
# Stage ble_rsp_gap_end_procedure (fail, device in wrong state)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_end_procedure(0x0181))
# Stage ble_rsp_sm_set_bondable_mode (always success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_set_bondable_mode())
def stage_connect_packets(self, addr, flags, connection_handle=0x00):
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_set_bondable_mode())
# Stage ble_rsp_gap_connect_direct (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_connect_direct(connection_handle, 0x0000))
# Stage ble_evt_connection_status
flags_byte = self._get_connection_status_flags_byte(flags)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.connection_status(addr, flags_byte,
connection_handle, 0, 0x0014,
0x0006, 0x0000, 0xFF))
def stage_get_rssi_packets(self, connection_handle=0x00, rssi=-80):
# Stage ble_rsp_connection_get_rssi
self.mocked_serial.stage_output(
BGAPIPacketBuilder.connection_get_rssi(connection_handle, rssi))
def stage_bond_packets(self,
addr,
flags,
connection_handle=0x00,
bond_handle=0x01):
# Stage ble_rsp_sm_set_bondable_mode (always success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_set_bondable_mode())
# Stage ble_rsp_sm_encrypt_start (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_encrypt_start(connection_handle, 0x0000))
# Stage ble_evt_sm_bond_status
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_bond_status(bond_handle, 0x00, 0x00, 0x00))
# Stage ble_evt_connection_status
flags_byte = self._get_connection_status_flags_byte(flags)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.connection_status(addr, flags_byte,
connection_handle, 0, 0x0014,
0x0006, 0x0000, 0xFF))
def stage_clear_bonds_packets(self, bonds, disconnects=False):
"""bonds -- list of 8-bit integer bond handles"""
if disconnects:
self.stage_disconnected_by_remote()
# Stage ble_rsp_get_bonds
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_get_bonds(len(bonds)))
# Stage ble_evt_sm_bond_status (bond handle)
for b in bonds:
if disconnects:
self.stage_disconnected_by_remote()
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_bond_status(b, 0x00, 0x00, 0x00))
# Stage ble_rsp_sm_delete_bonding (success)
for b in bonds:
if disconnects:
self.stage_disconnected_by_remote()
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_delete_bonding(0x0000))
def stage_scan_packets(self, scan_responses=[]):
# Stage ble_rsp_gap_set_scan_parameters (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_set_scan_parameters(0x0000))
# Stage ble_rsp_gap_discover (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_discover(0x0000))
for srp in scan_responses:
# Stage ble_evt_gap_scan_response
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_scan_response(
srp['rssi'], srp['packet_type'], srp['bd_addr'],
srp['addr_type'], srp['bond'],
[len(srp['data']) + 1] + srp['data']))
# Stage ble_rsp_gap_end_procedure (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_end_procedure(0x0000))
def stage_discover_characteristics_packets(self,
uuid_handle_list,
connection_handle=0x00):
# Stage ble_rsp_attclient_find_information (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_find_information(
connection_handle, 0x0000))
for i in range(0, len(uuid_handle_list) / 2):
uuid = uuid_to_bytearray(uuid_handle_list[2 * i])
handle = uuid_handle_list[2 * i + 1]
# Stage ble_evt_attclient_find_information_found
u = [len(uuid) + 1]
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_find_information_found(
connection_handle, handle,
(u + list(reversed([ord(b) for b in uuid])))))
# Stage ble_evt_attclient_procedure_completed (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_procedure_completed(
connection_handle, 0x0000, 0xFFFF))
def stage_char_read_packets(self,
att_handle,
att_type,
value,
connection_handle=0x00):
# Stage ble_rsp_attclient_read_by_handle (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_read_by_handle(
connection_handle, 0x0000))
# Stage ble_evt_attclient_attribute_value
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_attribute_value(
connection_handle, att_handle, att_type,
[len(value) + 1] + value))
def stage_char_write_packets(self, handle, value, connection_handle=0x00):
# Stage ble_rsp_attclient_attribute_write (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_attribute_write(
connection_handle, 0x0000))
# Stage ble_evt_attclient_procedure_completed
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_procedure_completed(
connection_handle, 0x0000, handle))
def stage_indication_packets(self,
handle,
packet_values,
connection_handle=0x00):
# Stage ble_evt_attclient_attribute_value
for value in packet_values:
val = list(value)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_attribute_value(
connection_handle,
handle,
0x00,
value=[len(val) + 1] + val))
class MockBGAPISerialDevice(object):
def __init__(self, serial_port_name='mock'):
self.serial_port_name = serial_port_name
self.mocked_serial = SerialMock(self.serial_port_name, 0.25)
self.patcher = patch('serial.Serial',
return_value=self.mocked_serial).start()
def stop(self):
self.patcher.stop()
@staticmethod
def _get_connection_status_flags_byte(flags):
flags_byte = 0x00
if 'connected' in flags:
flags_byte |= 0x01
if 'encrypted' in flags:
flags_byte |= 0x02
if 'completed' in flags:
flags_byte |= 0x04
if 'parameters_change' in flags:
flags_byte |= 0x08
return flags_byte
def stage_disconnected_by_remote(
self, connection_handle=0x00):
# Stage ble_evt_connection_disconnected (terminated by remote user)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.connection_disconnected(
connection_handle, 0x0213))
def stage_disconnect_packets(self, connected, fail, connection_handle=0x00):
if connected:
if fail:
raise NotImplementedError()
# Stage ble_rsp_connection_disconnect (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.connection_disconnect(
connection_handle, 0x0000))
# Stage ble_evt_connection_disconnected (success by local user)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.connection_disconnected(
connection_handle, 0x0000))
else: # not connected always fails
# Stage ble_rsp_connection_disconnect (fail, not connected)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.connection_disconnect(
connection_handle, 0x0186))
def stage_run_packets(self, connection_handle=0x00):
self.mocked_serial.stage_output(BGAPIPacketBuilder.system_boot())
# Stage ble_rsp_connection_disconnect (not connected, fail)
self.stage_disconnect_packets(False, True)
# Stage ble_rsp_gap_set_mode (success)
self.mocked_serial.stage_output(BGAPIPacketBuilder.gap_set_mode(0x0000))
# Stage ble_rsp_gap_end_procedure (fail, device in wrong state)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_end_procedure(0x0181))
# Stage ble_rsp_sm_set_bondable_mode (always success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_set_bondable_mode())
def stage_connect_packets(self, addr, flags, connection_handle=0x00):
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_set_bondable_mode())
# Stage ble_rsp_gap_connect_direct (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_connect_direct(connection_handle, 0x0000))
# Stage ble_evt_connection_status
flags_byte = self._get_connection_status_flags_byte(flags)
self.mocked_serial.stage_output(BGAPIPacketBuilder.connection_status(
addr, flags_byte, connection_handle, 0,
0x0014, 0x0006, 0x0000, 0xFF))
def stage_get_rssi_packets(self, connection_handle=0x00,
rssi=-80):
# Stage ble_rsp_connection_get_rssi
self.mocked_serial.stage_output(
BGAPIPacketBuilder.connection_get_rssi(connection_handle, rssi))
def stage_bond_packets(self, addr, flags,
connection_handle=0x00, bond_handle=0x01):
# Stage ble_rsp_sm_set_bondable_mode (always success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_set_bondable_mode())
# Stage ble_rsp_sm_encrypt_start (success)
self.mocked_serial.stage_output(BGAPIPacketBuilder.sm_encrypt_start(
connection_handle, 0x0000))
# Stage ble_evt_sm_bond_status
self.mocked_serial.stage_output(BGAPIPacketBuilder.sm_bond_status(
bond_handle, 0x00, 0x00, 0x00))
# Stage ble_evt_connection_status
flags_byte = self._get_connection_status_flags_byte(flags)
self.mocked_serial.stage_output(BGAPIPacketBuilder.connection_status(
addr, flags_byte, connection_handle, 0,
0x0014, 0x0006, 0x0000, 0xFF))
def stage_clear_bonds_packets(
self, bonds, disconnects=False):
"""bonds -- list of 8-bit integer bond handles"""
if disconnects:
self.stage_disconnected_by_remote()
# Stage ble_rsp_get_bonds
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_get_bonds(len(bonds)))
# Stage ble_evt_sm_bond_status (bond handle)
for b in bonds:
if disconnects:
self.stage_disconnected_by_remote()
self.mocked_serial.stage_output(BGAPIPacketBuilder.sm_bond_status(
b, 0x00, 0x00, 0x00))
# Stage ble_rsp_sm_delete_bonding (success)
for b in bonds:
if disconnects:
self.stage_disconnected_by_remote()
self.mocked_serial.stage_output(
BGAPIPacketBuilder.sm_delete_bonding(0x0000))
def stage_scan_packets(self, scan_responses=[]):
# Stage ble_rsp_gap_set_scan_parameters (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_set_scan_parameters(0x0000))
# Stage ble_rsp_gap_discover (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_discover(0x0000))
for srp in scan_responses:
# Stage ble_evt_gap_scan_response
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_scan_response(
srp['rssi'], srp['packet_type'], srp['bd_addr'],
srp['addr_type'], srp['bond'],
[len(srp['data'])+1]+srp['data']))
# Stage ble_rsp_gap_end_procedure (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.gap_end_procedure(0x0000))
def stage_discover_characteristics_packets(
self, uuid_handle_list, connection_handle=0x00):
# Stage ble_rsp_attclient_find_information (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_find_information(
connection_handle, 0x0000))
for i in range(0, len(uuid_handle_list) // 2):
uuid = uuid_to_bytearray(uuid_handle_list[2*i])
handle = uuid_handle_list[2*i + 1]
# Stage ble_evt_attclient_find_information_found
u = [len(uuid) + 1]
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_find_information_found(
connection_handle, handle,
(u+list(reversed(bytes(uuid))))))
# Stage ble_evt_attclient_procedure_completed (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_procedure_completed(
connection_handle, 0x0000, 0xFFFF))
def stage_char_read_packets(
self, att_handle, att_type, value, connection_handle=0x00):
# Stage ble_rsp_attclient_read_by_handle (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_read_by_handle(
connection_handle, 0x0000))
# Stage ble_evt_attclient_attribute_value
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_attribute_value(
connection_handle, att_handle, att_type, [len(value)+1]+value))
def stage_char_write_packets(
self, handle, value, connection_handle=0x00):
# Stage ble_rsp_attclient_attribute_write (success)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_attribute_write(
connection_handle, 0x0000))
# Stage ble_evt_attclient_procedure_completed
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_procedure_completed(
connection_handle, 0x0000, handle))
def stage_indication_packets(
self, handle, packet_values, connection_handle=0x00):
# Stage ble_evt_attclient_attribute_value
for value in packet_values:
val = list(value)
self.mocked_serial.stage_output(
BGAPIPacketBuilder.attclient_attribute_value(
connection_handle, handle, 0x00, value=[len(val)+1]+val))
def __init__(self, serial_port_name='mock'):
self.serial_port_name = serial_port_name
self.mocked_serial = SerialMock(self.serial_port_name, 0.25)
self.patcher = patch('serial.Serial',
return_value=self.mocked_serial).start()
def cyton_mock():
"""Instanciate Cyton with SerialMock and inspect buffer at tear down"""
serial = SerialMock()
yield cyton.Cyton(serial)
serial.validate_no_message_in_buffer()
serial.validate_all_patterns_consumed()
