def test_parse_misc_actions():
proclang = '''
main:
1. CONTROL: Set injector_valve to open
2. CONTROL: [p1 < 10] Disarm the remote control system
3. PRIMARY: Approach the launch tower, disconnect the cylinder, and replace the cap
4. OPS: [60s] Proceed with teardown
'''
suite = top.proclang.parse(proclang)
expected_suite = top.ProcedureSuite([
top.Procedure('main', [
top.ProcedureStep(
'1', top.StateChangeAction('injector_valve', 'open'), [
(top.Less('p1', 10), top.Transition('main', '2'))
], 'CONTROL'),
top.ProcedureStep(
'2', top.MiscAction('Disarm the remote control system'),
[(top.Immediate(), top.Transition('main', '3'))], 'CONTROL'),
top.ProcedureStep(
'3',
top.MiscAction(
'Approach the launch tower, disconnect the cylinder, and replace the cap'
), [(top.WaitFor(60e6), top.Transition('main', '4'))],
'PRIMARY'),
top.ProcedureStep('4', top.MiscAction('Proceed with teardown'), [],
'OPS')
])
])
assert suite == expected_suite
def test_parse_from_file():
filepath = os.path.join(os.path.dirname(__file__), 'example.proc')
suite = top.proclang.parse_from_file(filepath)
expected_suite = top.ProcedureSuite([
top.Procedure('main', [
top.ProcedureStep(
'1', top.StateChangeAction('series_fill_valve', 'closed'),
[(top.WaitFor(5e6), top.Transition('main', '2'))], 'PRIMARY'),
top.ProcedureStep(
'2', top.StateChangeAction('supply_valve', 'open'),
[(top.Less('p1', 600), top.Transition('abort_1', '1')),
(top.Greater('p1', 1000), top.Transition('abort_2', '1')),
(top.Immediate(), top.Transition('main', '3'))], 'PRIMARY'),
top.ProcedureStep(
'3', top.StateChangeAction('series_fill_valve', 'open'),
[(top.Immediate(), top.Transition('main', '4'))], 'PRIMARY'),
top.ProcedureStep(
'4', top.StateChangeAction('remote_fill_valve', 'open'), [
(top.WaitFor(180e6), top.Transition('main', '5'))
], 'PRIMARY'),
top.ProcedureStep(
'5', top.StateChangeAction('remote_fill_valve', 'closed'),
[(top.Immediate(), top.Transition('main', '6'))], 'PRIMARY'),
top.ProcedureStep(
'6', top.StateChangeAction('remote_vent_valve', 'open'),
[(top.Immediate(), top.Transition('main', '7'))], 'PRIMARY'),
top.ProcedureStep('7', top.MiscAction('Proceed with teardown'), [],
'OPS')
]),
top.Procedure('abort_1', [
top.ProcedureStep(
'1', top.StateChangeAction('supply_valve', 'closed'), [
(top.WaitFor(10e6), top.Transition('abort_1', '2'))
], 'SECONDARY'),
top.ProcedureStep(
'2', top.StateChangeAction('remote_vent_valve', 'open'), [
(top.Immediate(), top.Transition('abort_1', '3'))
], 'SECONDARY'),
top.ProcedureStep('3', top.MiscAction('Proceed with teardown'), [],
'OPS')
]),
top.Procedure('abort_2', [
top.ProcedureStep(
'1', top.StateChangeAction('supply_valve', 'closed'), [
(top.Immediate(), top.Transition('abort_2', '2'))
], 'CONTROL'),
top.ProcedureStep(
'2', top.StateChangeAction('line_vent_valve', 'open'), [
(top.Immediate(), top.Transition('abort_2', '3'))
], 'CONTROL'),
top.ProcedureStep('3', top.MiscAction('Proceed with teardown'), [],
'OPS')
]),
])
assert suite == expected_suite
def test_jump_to_step_normal():
plumb_b = PlumbingBridge()
control_b = ControlsBridge(plumb_b)
proc_b = ProceduresBridge(plumb_b, control_b)
procedure = top.Procedure('main', [
top.ProcedureStep('1', top.StateChangeAction('injector_valve', 'open'),
[(top.Immediate(), top.Transition('main', '2'))],
'PRIMARY'),
top.ProcedureStep(
'2', top.StateChangeAction('injector_valve', 'closed'),
[(top.Immediate(), top.Transition('main', '3'))], 'PRIMARY'),
top.ProcedureStep(
'3', top.StateChangeAction('injector_valve', 'closed'),
[(top.Immediate(), top.Transition('main', '4'))], 'PRIMARY'),
top.ProcedureStep('4', top.MiscAction('Approach the launch tower'), [],
'SECONDARY')
])
proc_b.load_suite(top.ProcedureSuite([procedure]))
plumb_eng = make_plumbing_engine()
plumb_b.load_engine(plumb_eng)
proc_eng = proc_b._proc_eng
assert proc_eng.current_step == procedure.step_list[0]
assert proc_eng.step_position == top.StepPosition.Before
proc_b.procJump("2")
assert proc_eng.current_step == procedure.step_list[1]
assert proc_eng.step_position == top.StepPosition.After
proc_b.procJump("4")
assert proc_eng.current_step == procedure.step_list[3]
assert proc_eng.step_position == top.StepPosition.After
def test_proc_bridge_procedure_step_affects_plumbing():
plumb_b = PlumbingBridge()
control_b = ControlsBridge(plumb_b)
proc_b = ProceduresBridge(plumb_b, control_b)
procedure = top.Procedure('main', [
top.ProcedureStep('1', top.StateChangeAction('injector_valve', 'open'),
[(top.Immediate(), top.Transition('main', '2'))],
'PRIMARY'),
top.ProcedureStep(
'2', top.StateChangeAction('injector_valve', 'closed'),
[(top.Immediate(), top.Transition('main', '3'))], 'PRIMARY'),
top.ProcedureStep('3', top.MiscAction('Approach the launch tower'), [],
'SECONDARY')
])
proc_b.load_suite(top.ProcedureSuite([procedure]))
plumb_eng = make_plumbing_engine()
plumb_b.load_engine(plumb_eng)
assert plumb_eng.current_state('injector_valve') == 'closed'
proc_b.procStepForward()
assert plumb_eng.current_state('injector_valve') == 'open'
proc_b.procStepForward()
assert plumb_eng.current_state('injector_valve') == 'closed'
def test_time_advance():
plumb_b = PlumbingBridge()
control_b = ControlsBridge(plumb_b)
proc_b = ProceduresBridge(plumb_b, control_b)
procedure = top.Procedure('main', [
top.ProcedureStep('1', top.StateChangeAction('injector_valve', 'open'),
[(top.Less('A', 75), top.Transition('main', '2'))],
'PRIMARY'),
top.ProcedureStep('2', top.MiscAction('Approach the launch tower'), [],
'SECONDARY')
])
proc_b.load_suite(top.ProcedureSuite([procedure]))
plumb_eng = make_plumbing_engine()
plumb_b.load_engine(plumb_eng)
tol = 0.01
proc_eng = proc_b._proc_eng
proc_b.procStepForward() # execute step 1
assert not proc_eng.ready_to_proceed()
assert plumb_eng.current_pressures('A') == 100
assert plumb_eng.current_pressures('B') == 0
plumb_b.timeAdvance()
assert proc_eng.ready_to_proceed()
# We expect pressures to equalize at 50 once the system is steady
assert abs(plumb_eng.current_pressures('A') - 50) < tol
assert abs(plumb_eng.current_pressures('B') - 50) < tol
def test_proc_bridge_procedure_controls_advance_procedure():
plumb_b = MockPlumbingBridge()
proc_b = ProceduresBridge(plumb_b)
procedure = top.Procedure('main', [
top.ProcedureStep('1', top.StateChangeAction('injector_valve', 'open'),
[(top.Immediate(), top.Transition('main', '2'))],
'PRIMARY'),
top.ProcedureStep('2', top.StateChangeAction('vent_valve', 'closed'), [
(top.WaitFor(100), top.Transition('main', '3'))
], 'PRIMARY'),
top.ProcedureStep('3', top.MiscAction('Approach the launch tower'), [],
'SECONDARY')
])
proc_b.load_suite(top.ProcedureSuite([procedure]))
proc_eng = proc_b._proc_eng
assert proc_eng.current_step == procedure.step_list[0]
assert proc_eng.step_position == top.StepPosition.Before
proc_b.procStepForward()
assert proc_eng.current_step == procedure.step_list[0]
assert proc_eng.step_position == top.StepPosition.After
proc_b.procStepForward()
assert proc_eng.current_step == procedure.step_list[1]
assert proc_eng.step_position == top.StepPosition.After
proc_b.procStepForward() # does nothing; condition is not satisfied
assert proc_eng.current_step == procedure.step_list[1]
assert proc_eng.step_position == top.StepPosition.After
proc_b.procStop()
assert proc_eng.current_step == procedure.step_list[0]
assert proc_eng.step_position == top.StepPosition.Before
def misc_action(self, data):
"""
Process `misc_action` nodes in the parse tree.
`data` is a list of the form [action].
"""
return top.MiscAction(data[0])
def test_time_stop():
plumb_b = PlumbingBridge()
plumb_b.step_size = 0.1e6
control_b = ControlsBridge(plumb_b)
proc_b = ProceduresBridge(plumb_b, control_b)
procedure = top.Procedure('main', [
top.ProcedureStep('1', top.StateChangeAction('injector_valve', 'open'),
[(top.WaitFor(0.1e6), top.Transition('main', '2'))],
'PRIMARY'),
top.ProcedureStep('2', top.MiscAction('Approach the launch tower'), [],
'SECONDARY')
])
proc_b.load_suite(top.ProcedureSuite([procedure]))
plumb_eng = make_plumbing_engine()
plumb_b.load_engine(plumb_eng)
proc_eng = proc_b._proc_eng
proc_b.procStepForward() # execute step 1
assert not proc_eng.ready_to_proceed()
# Time hasn't advanced yet, so pressures should be the same
assert plumb_eng.current_pressures('A') == 100
assert plumb_eng.current_pressures('B') == 0
plumb_b.timeStepForward() # time == 0.1s
assert proc_eng.ready_to_proceed()
# Valve is open, so pressures should start dropping
assert plumb_eng.current_pressures('A') < 100
assert plumb_eng.current_pressures('B') > 0
proc_b.procStop()
plumb_b.timeStop()
# Everything should now be as it started
assert proc_eng.current_step.step_id == '1'
assert plumb_eng.current_state('injector_valve') == 'closed'
assert plumb_eng.current_pressures('A') == 100
assert plumb_eng.current_pressures('B') == 0
proc_b.procStepForward() # execute step 1
assert not proc_eng.ready_to_proceed()
# Time hasn't advanced yet, so pressures should be the same
assert plumb_eng.current_pressures('A') == 100
assert plumb_eng.current_pressures('B') == 0
plumb_b.timeStepForward() # time == 0.1s
assert proc_eng.ready_to_proceed()
# Valve is open, so pressures should start dropping
assert plumb_eng.current_pressures('A') < 100
assert plumb_eng.current_pressures('B') > 0
def test_execute_custom_action():
plumb_eng = one_component_engine()
proc_eng = top.ProceduresEngine(plumb_eng)
action = top.StateChangeAction('c1', 'closed')
assert plumb_eng.current_state('c1') == 'open'
proc_eng.execute(action)
assert plumb_eng.current_state('c1') == 'closed'
misc_action = top.MiscAction('Approach the tower')
proc_eng.execute(misc_action)
assert plumb_eng.current_state('c1') == 'closed'
def test_proc_bridge_load_suite():
plumb_b = MockPlumbingBridge()
proc_b = ProceduresBridge(plumb_b)
procedure = top.Procedure('main', [
top.ProcedureStep('1', top.StateChangeAction('injector_valve', 'open'),
[(top.Immediate(), top.Transition('main', '2'))],
'PRIMARY'),
top.ProcedureStep('2', top.MiscAction('Approach the launch tower'), [],
'SECONDARY')
])
suite = top.ProcedureSuite([procedure])
proc_b.load_suite(suite)
assert proc_b._proc_eng._suite == suite
assert proc_b.steps.procedure == procedure
def test_procedure_step_affects_component_state():
plumb_b = PlumbingBridge()
control_b = ControlsBridge(plumb_b)
proc_b = ProceduresBridge(plumb_b, control_b)
procedure = top.Procedure('main', [
top.ProcedureStep('1', top.StateChangeAction('injector_valve', 'open'),
[(top.Immediate(), top.Transition('main', '2'))],
'PRIMARY'),
top.ProcedureStep(
'2', top.StateChangeAction('injector_valve', 'closed'),
[(top.Immediate(), top.Transition('main', '3'))], 'PRIMARY'),
top.ProcedureStep('3', top.MiscAction('Approach the launch tower'), [],
'SECONDARY')
])
proc_b.load_suite(top.ProcedureSuite([procedure]))
plumb_eng = make_plumbing_engine()
plumb_b.load_engine(plumb_eng)
control_b.refresh()
proc_eng = proc_b._proc_eng
assert proc_eng.current_step == procedure.step_list[0]
assert proc_eng.step_position == top.StepPosition.Before
proc_b.procStepForward()
assert (control_b.states[0] == "open")
assert proc_eng.current_step == procedure.step_list[0]
assert proc_eng.step_position == top.StepPosition.After
proc_b.procStepForward()
assert (control_b.states[0] == "closed")
assert proc_eng.current_step == procedure.step_list[1]
assert proc_eng.step_position == top.StepPosition.After
proc_b.procStepForward()
assert (control_b.states[0] == "closed")
proc_b.procStop()
assert proc_eng.current_step == procedure.step_list[0]
assert proc_eng.step_position == top.StepPosition.Before
def test_steps_model_get_data():
procedure = top.Procedure('main', [
top.ProcedureStep('1', top.StateChangeAction('injector_valve', 'open'), [
(top.Immediate(), top.Transition('main', '2'))
], 'PRIMARY'),
top.ProcedureStep('2', top.MiscAction('Approach the launch tower'), [], 'SECONDARY')
])
model = ProcedureStepsModel(procedure)
wrapper = ProcedureConditionWrapper(top.Immediate(), top.Transition('main', '2'))
idx_0 = model.createIndex(0, 0)
assert model.data(idx_0, ProcedureStepsModel.ActionRoleIdx) == 'Set injector_valve to open'
assert model.data(idx_0, ProcedureStepsModel.OperatorRoleIdx) == 'PRIMARY'
assert model.data(idx_0, ProcedureStepsModel.ConditionsRoleIdx) == [wrapper]
idx_1 = model.createIndex(1, 0)
assert model.data(idx_1, ProcedureStepsModel.ActionRoleIdx) == 'Approach the launch tower'
assert model.data(idx_1, ProcedureStepsModel.OperatorRoleIdx) == 'SECONDARY'
assert model.data(idx_1, ProcedureStepsModel.ConditionsRoleIdx) == []
def test_control_panel_initialization():
plumb_b = PlumbingBridge()
control_b = ControlsBridge(plumb_b)
proc_b = ProceduresBridge(plumb_b, control_b)
procedure = top.Procedure('main', [
top.ProcedureStep('1', top.StateChangeAction('injector_valve', 'open'),
[(top.Immediate(), top.Transition('main', '2'))],
'PRIMARY'),
top.ProcedureStep(
'2', top.StateChangeAction('injector_valve', 'closed'),
[(top.Immediate(), top.Transition('main', '3'))], 'PRIMARY'),
top.ProcedureStep('3', top.MiscAction('Approach the launch tower'), [],
'SECONDARY')
])
proc_b.load_suite(top.ProcedureSuite([procedure]))
plumb_eng = make_plumbing_engine()
plumb_b.load_engine(plumb_eng)
control_b.refresh()
assert (control_b.toggleable_components == ['injector_valve'])
assert (control_b.states[0] == "closed")
def test_transitions_respects_procedure_identifier():
plumb_eng = one_component_engine()
action = top.MiscAction('Do nothing')
s1 = top.ProcedureStep(
's1', action, [(NeverSatisfied(), top.Transition('p1', 'same_name')),
(top.Immediate(), top.Transition('p2', 'same_name'))],
'PRIMARY')
same_name_1 = top.ProcedureStep('same_name', action, [], 'PRIMARY')
same_name_2 = top.ProcedureStep('same_name', action, [], 'PRIMARY')
proc_1 = top.Procedure('p1', [s1, same_name_1])
proc_2 = top.Procedure('p2', [same_name_2])
proc_suite = top.ProcedureSuite([proc_1, proc_2], 'p1')
proc_eng = top.ProceduresEngine(plumb_eng, proc_suite)
proc_eng.execute_current()
assert proc_eng.current_procedure_id == 'p1'
assert proc_eng.current_step.step_id == 's1'
proc_eng.next_step()
assert proc_eng.current_procedure_id == 'p2'
assert proc_eng.current_step.step_id == 'same_name'
def test_action_types():
a1 = top.StateChangeAction('p1', 'open')
a2 = top.MiscAction('approach the tower')
assert isinstance(a1, top.Action)
assert isinstance(a2, top.Action)
