def convert_compile_load(convert_xml2tse):
tse_path = convert_xml2tse
cpd_path = tse_path[:-4] + " Target files\\" + tse_path.split("\\")[-1][:-4] + ".cpd"
# Open the converted tse file
model.load(tse_path)
# Compile the model
model.compile()
def load_and_compile(tse_path, use_vhil=True):
cpd_path = tse_path[:-4] + " Target files\\" + tse_path.split(
"\\")[-1][:-4] + ".cpd"
# Open the converted tse file
model.load(tse_path)
# Compile the model
model.compile()
# Load to VHIL
hil.load_model(file=cpd_path, offlineMode=False, vhil_device=use_vhil)
def convert_compile_load(convert_xml2tse):
tse_path = convert_xml2tse
cpd_path = tse_path[:-4] + " Target files\\" + tse_path.split("\\")[-1][:-4] + ".cpd"
# Open the converted tse file
model.load(tse_path)
# Compile the model
model.compile()
# Load to VHIL
hil.load_model(file=cpd_path, offlineMode=False, vhil_device=vhil)
def compile_tse(convert_xml2tse):
# Compiles the tse file
tse_path = convert_xml2tse
# Convert the model
cpd_path = tse_path[:-4] + " Target files\\" + tse_path.split("\\")[-1][:-4] + ".cpd"
# Open the converted tse file
model.load(tse_path)
# Compile the model
model.compile()
return cpd_path
def convert_compile_load():
# Comment this if don't wont to compile model again
###################################################
# Convert the model
converter = Converter("psim", netlist_path)
tse_path = converter.convert_schema(compile_model=False)
# Open the converted tse file
model.load(tse_path)
# Compile the model
model.compile()
###################################################
# Load to VHIL
hil.load_model(file=cpd_path, offlineMode=False, vhil_device=vhil)
def load_schematic(self):
'''
Load HIL simulation schematic
'''
if self.model_name[-4:] == ".tse":
model_file = self.hil_model_dir + self.model_name
else:
model_file = self.hil_model_dir + self.model_name + r".tse"
self.ts.log("Model File: %s" % model_file)
if os.path.isfile(model_file):
self.ts.log_debug(
"Model file exists! Starting to compile power electronic parts..."
)
else:
self.ts.log_debug(
"Model file does not exist! {}".format(model_file))
status = False
return status
# load schematic (with default component parameters)
if not model.load(model_file, debug=self.debug):
self.ts.log_warning("Model did not load!")
status = False
return status
return True
def convert_compile_load():
# Comment this if don't wont to compile model again
# ###################################################
# # Convert the model
converter = Converter("psim", netlist_path)
tse_path = converter.convert_schema(compile_model=False)[0]
cpd_path = tse_path[:-4] + " Target files\\" + tse_path.split("\\")[-1][:-4] + ".cpd"
# Open the converted tse file
model.load(tse_path)
# Compile the model
model.compile()
###################################################
# Load to VHIL
hil.load_model(file=cpd_path, offlineMode=False, vhil_device=vhil)
def convert_compile_load(convert_xml2tse):
tse_path = convert_xml2tse
cpd_path = tse_path[:-4] + " Target files\\" + tse_path.split("\\")[-1][:-4] + ".cpd"
# Open the converted tse file
model.load(tse_path)
# Compile the model
model.compile()
# Load to VHIL
hil.load_model(file=cpd_path, offlineMode=False, vhil_device=vhil)
hil.set_pv_input_file("SCP1", psim_tests_dir + '\\E50530_Thin_Film.ipvx', illumination=1000.0, temperature=25.0)
# Start simulation
hil.start_simulation()
yield
hil.stop_simulation()
def convert_compile_load(convert_xml2tse):
tse_path = convert_xml2tse
cpd_path = tse_path[:-4] + " Target files\\" + tse_path.split(
"\\")[-1][:-4] + ".cpd"
# Open the converted tse file
model.load(tse_path)
# Compile the model
model.compile()
# Load to VHIL
hil.load_model(file=cpd_path, offlineMode=False, vhil_device=vhil)
# Set source value
hil.set_source_sine_waveform(name='Vsin3ph',
rms=220,
frequency=50,
phase=0)
hil.start_simulation()
yield
# Stop simulation
hil.stop_simulation()
def load_schematic(self):
'''
Load HIL simulation schematic
'''
lib_dir_raw = os.path.dirname(__file__) + os.path.sep
lib_dir = lib_dir_raw.replace("\\", "/")
model_file = r"Typhoon/" + self.model_name + r".tse"
model_dir = lib_dir + model_file
self.ts.log("Model File: %s" % model_dir)
if os.path.isfile(model_dir):
self.ts.log_debug(
"Model file exists! Starting to compile power electronic parts..."
)
else:
self.ts.log_debug("Model file does not exist!")
status = False
return status
# load schematic (with default component parameters)
if not model.load(model_dir, debug=True):
self.ts.log_warning("Model did not load!")
status = False
return status
sys.path.insert(0, r'C:/Typhoon HIL Control Center')
#sys.path.insert(0, r'C:/Typhoon HIL Control Center/typhoon/conf')
#sys.path.insert(0, r'C:/Typhoon HIL Control Center/typhoon/conf/components')
import typhoon.api.hil_control_panel as hil
from typhoon.api.schematic_editor import model
import os
hil.set_debug_level(level=1)
hil.stop_simulation()
model.get_hw_settings()
#model_dir = r'D:/SVP/SVP Directories 11-7-16/UL 1741 SA Dev/Lib/Typhoon/'
#print model_dir, os.path.isfile(model_dir)
if not model.load(
r'D:/SVP/SVP Directories 11-7-16/UL 1741 SA Dev/Lib/Typhoon/ASGC_AI.tse'
):
print "Model did not load!"
if not model.compile():
print "Model did not compile!"
# first we need to load model
hil.load_model(
file=
r'D:/SVP/SVP Directories 11-7-16/UL 1741 SA Dev/Lib/Typhoon/ASGC_AI Target files/ASGC_AI.cpd'
)
# we could also open existing settings file...
hil.load_settings_file(
file=
import numpy as np
import math
sys.path.insert(
0, r'C:/Typhoon HIL Control Center/python_portable/Lib/site-packages')
sys.path.insert(0, r'C:/Typhoon HIL Control Center/python_portable')
sys.path.insert(0, r'C:/Typhoon HIL Control Center')
import typhoon.api.hil_control_panel as hil
from typhoon.api.schematic_editor import model
import os
hil.set_debug_level(level=3)
hil.stop_simulation()
model.get_hw_settings()
if not model.load(
r'D:/SVP/SVP 1.4.3 Directories 5-2-17/UL1741 SA for ASGC/Lib/svpelab/Typhoon/ASGC_AI.tse'
):
print("Model did not load!")
if not model.compile():
print("Model did not compile!")
# first we need to load model
hil.load_model(
file=
r'D:/SVP/SVP 1.4.3 Directories 5-2-17/UL1741 SA for ASGC/Lib/svpelab/Typhoon/ASGC_AI Target files/ASGC_AI.cpd'
)
# we could also open existing settings file...
hil.load_settings_file(
file=
import numpy as np
import math
sys.path.insert(
0, r'C:/Typhoon HIL Control Center/python_portable/Lib/site-packages')
sys.path.insert(0, r'C:/Typhoon HIL Control Center/python_portable')
sys.path.insert(0, r'C:/Typhoon HIL Control Center')
import typhoon.api.hil_control_panel as hil
from typhoon.api.schematic_editor import model
import os
hil.set_debug_level(level=3)
hil.stop_simulation()
model.get_hw_settings()
if not model.load(
r'D:/SVP/SVP 1.4.3 Directories 5-2-17/svp_energy_lab-loadsim/Lib/svpelab/Typhoon/ASGC.tse'
):
print "Model did not load!"
if not model.compile():
print "Model did not compile!"
# first we need to load model
hil.load_model(
file=r'D:/SVP/SVP 1.4.3 Directories 5-2-17/svp_energy_lab-loadsim/Lib'
r'/svpelab/Typhoon/ASGC Target files/ASGC.cpd')
# we could also open existing settings file...
hil.load_settings_file(
file=r'D:/SVP/SVP 1.4.3 Directories 5-2-17/svp_energy_lab-loadsim/Lib/'
r'svpelab/Typhoon/settings2.runx')