def __init__(self, self_addr, addr, serial, baud, launch_serial, receive, send, slave):
print("Starting ISP_Server!")
self.connected = False
self.client_connected = False
self.server = None
self.client = None
port = [2700, 2701]
if slave:
from ucollections import deque
port = port[::-1]
else:
from collections import deque
self.d_to_send = deque((), 128)
self.d_to_write = deque((), 128)
if receive:
_thread.start_new_thread(self.connect, (self_addr, addr, port[0]))
if send:
_thread.start_new_thread(self.start_server, (self_addr, addr, port[1]))
self.ser = isp_writer.open_serial(serial, baud)
while not self.connected and not self.client_connected:
sleep(0.2)
_thread.start_new_thread(self.send, ())
_thread.start_new_thread(self.read_serial, ())
_thread.start_new_thread(self.receive, ())
_thread.start_new_thread(self.write_serial, ())
print("ISP_Server started!")
def __init__(self, runq_len=16, waitq_len=16, ioq_len=0):
self.runq = ucollections.deque((), runq_len, True)
self.ioq_len = ioq_len
if ioq_len:
self.ioq = ucollections.deque((), ioq_len, True)
self._call_io = self._call_now
else:
self._call_io = self.call_soon
self.waitq = utimeq.utimeq(waitq_len)
# Current task being run. Task is a top-level coroutine scheduled
# in the event loop (sub-coroutines executed transparently by
# yield from/await, event loop "doesn't see" them).
self.cur_task = None
def __init__(self, runq_len=16, waitq_len=16):
self.runq = ucollections.deque((), runq_len, True)
self.waitq = utimeq.utimeq(waitq_len)
# Current task being run. Task is a top-level coroutine scheduled
# in the event loop (sub-coroutines executed transparently by
# yield from/await, event loop "doesn't see" them).
self.cur_task = None
def __init__(self,
columns,
rows,
uart_id,
background=BLUE,
foreground=YELLOW,
enable_cursor=True):
self.uart = UART(uart_id, 115200)
self.key_buffer = deque((), 10)
self.screen = Screen(columns, rows)
self.screen.dirty.clear()
self.screen_buffer = [[None] * columns for _ in range(rows)]
self.input_stream = Stream(self.screen)
self.lcd_device = LCD(rate=42000000)
self.lcd = self.lcd_device.initCh(color=foreground,
font='Amstrad_8',
scale=1)
self.foreground = foreground
self.background = background
self.lcd.fillMonocolor(background)
self.rows = rows
self.columns = columns
self.show_cursor = True
self.cursor_delay = 20
self.last_draw_cursor_time = time.ticks_ms()
self.last_cursor_x = 0
self.last_cursor_y = 0
self.draw_cursor_in_progress = False
self.enable_cursor = enable_cursor
def __init__(self):
self._parser_state = self.PARSERSTATE_IDLE
self._current_message_packet = None
self._current_byte_counter = 0
self._current_integer = 0
# Micropython needs a defined size of deque
self._packet_queue = deque((), 10)
def __init__(self,
text=[""],
scl_pin=22,
sda_pin=21,
width=128,
height=64,
max_queue=10):
self.q = deque((), 10)
self.scl_pin = scl_pin
self.sda_pin = sda_pin
self.width = width
self.height = height
self.enabled = True
self.text = text
self.p = sys.platform
self.x_text = 0
self.y_text = 0
self.x_image = 10
self.y_image = 10
if self.p == "esp32":
i2c = I2C(-1, scl=Pin(self.scl_pin), sda=Pin(self.sda_pin))
self.oled = ssd1306.SSD1306_I2C(self.width, self.height, i2c)
self.clear()
_loop = asyncio.get_event_loop()
_loop.create_task(self.loop_process())
def __init__(self, states):
self._state_table = states
self._current_state = None
self._queue = deque((), 100)
self._queue_lock = _thread.allocate_lock()
self._timer = None
self._thread = None
self._timer_callback = None
def __init__(self, input_stream, output_stream):
"""Constructor. input_stream and output_stream need to be (bytes) IO with
non-blocking Read() and Write() binary functions."""
self._input_stream = input_stream
self._output_stream = output_stream
# Micropython needs a defined size of deque
self._incoming_bytes_buffer = deque((), 300) # List/Deque of integers
self._received_packet_parser = MessagePacketParser()
def __init__(self, i2c, address=0x40):
pca9685.PCA9685.__init__(self, i2c, address)
self.freq(1000)
self.data_cache = ()
self.DataCache = deque(self.data_cache, 10)
self.left_value = 0
self.right_value = 0
self.front_after = 0
self.left_right = 0
def __init__(self):
self.tasks = deque((), 20)
self.poller = select.poll()
self.wait = {}
self.tasks.append(self.micro_server())
self.led = Pin(0, Pin.OUT)
def __init__(self,
pin=14,
pull=None,
active_state=1,
bounce_ms=1000,
event_loop=None):
self.active_queue = deque((), 10)
self.pin = pin
self.pull = pull
self.active_state = active_state
self.bounce_ms = bounce_ms
if event_loop:
event_loop.create_task(self.check_changes())
def print_tail_from_jotter(self, n_lines):
"""Read and print the last n lines to stdout."""
try:
tail_lines = deque((), n_lines)
with open(self._filename, 'r') as f:
line = f.readline()
while line:
l = line.rstrip("\n")
tail_lines.append(l)
line = f.readline()
for l in tail_lines:
print(l)
except OSError:
pass
def __init__(self, response_cb, events_cb, timer, device):
self.response_cb = response_cb
self.events_cb = events_cb
self.us_timer = timer
# Allocate a bound method reference for use in a callback
# (see https://docs.micropython.org/en/latest/reference/isr_rules.html#creation-of-python-objects
# and https://forum.micropython.org/viewtopic.php?f=2&t=4027&p=23118#p23118)
self.on_timer_ref = self.on_timer
self.device = device
self.updates_queue = deque((), CC_UPDATES_QUEUE_SIZE)
self.sync_counter = 0
self.handshake_attempts = 0
self.handshake_timeout = 0
self.dev_desc_timeout = 0
self.comm_state = WAITING_SYNCING
self.sync_message = None
self.protocol = CCProtocol()
def __init__(self, id = 2, baudrate=115200, timeout=5000, motoctl = 'X6'):
self.uart = None
self.motoctl = Pin(motoctl)
self.motoctl_timer = Timer(2, freq = 20000)
self.motoPWM_channel = self.motoctl_timer.channel(1, Timer.PWM, pin=self.motoctl)
self.motoPWM_channel.pulse_width_percent(50)
self.connect(id, baudrate, timeout)
self._rxbuffer = bytearray(32)
self._headings = array('H', [0 for i in range(READINGS_LENGTH)])#heading = heading[i]/64.0
self._distances = array('H', [0 for i in range(READINGS_LENGTH)])#distance = distance[i]/4.0 #in mm
self._readings_index = 0
self._descriptor_queue = collections.deque((), 32) #File fifo
self._next_data_type = None
self._status = None
self._error = None
self._scanerrors = 0
def __init__(self, loop):
super(MembraneNumpad, self).__init__(loop)
# No idea how to pick a safe timer number.
self.timer = pyb.Timer(7)
self.cols = [
Pin(i, Pin.IN, pull=Pin.PULL_UP)
for i in ('M2_COL0', 'M2_COL1', 'M2_COL2')
]
self.rows = [
Pin(i, Pin.OUT_OD, value=0)
for i in ('M2_ROW0', 'M2_ROW1', 'M2_ROW2', 'M2_ROW3')
]
# We scan in random order, because Tempest.
# - scanning only starts when something pressed
# - complete scan is done before acting on what was measured
self.scan_order = array.array('b', list(range(NUM_ROWS)))
# each full scan is pushed onto this, only last one kept if overflow
self.scans = deque((), 50, 0)
# internal to timer irq handler
self._history = None # see _start_scan
self._scan_count = 0
self._cycle = 0
self.waiting_for_any = True
# time of last press
self.lp_time = 0
for c in self.cols:
c.irq(self.anypress_irq, Pin.IRQ_FALLING | Pin.IRQ_RISING)
# ready to start
self.loop = loop
def __init__(self,temper_threshold=20):
self.tasks=deque( () , 20)
self.poller=select.poll()
self.wait={}
self.mail_sent=0
self.threshold=temper_threshold
self.sensor=dht.DHT11(Pin(2))
try:
self.sensor.measure()
self.temp=self.sensor.temperature()
self.hum=self.sensor.humidity()
except:
self.temp=0
self.hum=0
print("Can not measure")
self.tasks.append(self.micro_server())
def __init__(self,
my_id,
server,
port=8123,
ssid='',
pw='',
timeout=2000,
conn_cb=None,
conn_cb_args=None,
verbose=False,
led=None,
wdog=False):
self._my_id = '{}{}'.format(my_id, '\n') # Ensure >= 1 newline
self._server = server
self._ssid = ssid
self._pw = pw
self._port = port
self._to = timeout # Client and server timeout
self._tim_short = timeout // 10
self._tim_ka = timeout // 4 # Keepalive interval
self._concb = conn_cb
self._concbargs = () if conn_cb_args is None else conn_cb_args
self._verbose = verbose
self._led = led
if wdog:
if platform == 'pyboard':
self._wdt = machine.WDT(0, 20000)
def wdt():
def inner(feed=0): # Ignore control values
if not feed:
self._wdt.feed()
return inner
self._feed = wdt()
else:
def wdt(secs=0):
timer = machine.Timer(-1)
timer.init(period=1000,
mode=machine.Timer.PERIODIC,
callback=lambda t: self._feed())
cnt = secs
run = False # Disable until 1st feed
def inner(feed=WDT_CB):
nonlocal cnt, run, timer
if feed == 0: # Fixed timeout
cnt = secs
run = True
elif feed < 0: # WDT control/callback
if feed == WDT_CANCEL:
timer.deinit() # Permanent cancellation
elif feed == WDT_CB and run: # Timer callback and is running.
cnt -= 1
if cnt <= 0:
machine.reset()
return inner
self._feed = wdt(20)
else:
self._feed = lambda x: None
self._sta_if = network.WLAN(network.STA_IF)
ap = network.WLAN(network.AP_IF) # create access-point interface
ap.active(False) # deactivate the interface
self._sta_if.active(True)
gc.collect()
if platform == 'esp8266':
import esp
esp.sleep_type(
esp.SLEEP_NONE
) # Improve connection integrity at cost of power consumption.
self._evfail = asyncio.Event()
self._s_lock = asyncio.Lock() # For internal send conflict.
self._last_wr = utime.ticks_ms()
self._lineq = deque((), 20, True) # 20 entries, throw on overflow
self.connects = 0 # Connect count for test purposes/app access
self._sock = None
self._ok = False # Set after 1st successful read
self._acks_pend = SetByte() # ACKs which are expected to be received
gc.collect()
asyncio.create_task(self._run())
# Tests for deques with "check overflow" flag and other extensions
# wrt to CPython.
try:
try:
from ucollections import deque
except ImportError:
from collections import deque
except ImportError:
print("SKIP")
raise SystemExit
# Initial sequence is not supported
try:
deque([1, 2, 3], 10)
except ValueError:
print("ValueError")
# Not even empty list, only empty tuple
try:
deque([], 10)
except ValueError:
print("ValueError")
# Only fixed-size deques are supported, so length arg is mandatory
try:
deque(())
except TypeError:
print("TypeError")
d = deque((), 2, True)
# Tests for deques with "check overflow" flag and other extensions
# wrt to CPython.
try:
try:
from ucollections import deque
except ImportError:
from collections import deque
except ImportError:
print("SKIP")
raise SystemExit
# Initial sequence is not supported
try:
deque([1, 2, 3], 10)
except ValueError:
print("ValueError")
# Not even empty list, only empty tuple
try:
deque([], 10)
except ValueError:
print("ValueError")
# Only fixed-size deques are supported, so length arg is mandatory
try:
deque(())
except TypeError:
print("TypeError")
d = deque((), 2, True)
time.sleep(5)
print("esperando publicar..")
print(telemetry)
def onRead(sensorObj, **kwargs):
q = kwargs["queue"]
telemetry = {
"voltage": sensorObj.voltage,
"current": sensorObj.current,
"power": sensorObj.power
}
d.append(telemetry)
print("Bus Voltage: %.3f V" % sensorObj.voltage)
print("Current: %.3f mA" % sensorObj.current)
print("Power: %.3f mW" % sensorObj.power)
d = deque((), 11)
kwargs = {
"queue": d
}
#Crea hilo para lectura del sensor am2315
ina219 = INA219_(buffLen = 3, period = 5, sem = None, on_read = onRead, **kwargs)
#Comienza lectura del sensor
_thread.start_new_thread(ina219.run, ())
_thread.start_new_thread(lambda: publish_loop(**kwargs), ())
time.sleep(17)
ina219.stop() # Detiene el sensor
ina219.join() # Espera a que el sensor se detenga
#ina219.start()
class Morse:
encoding = {
'a': '.-',
'b': '-...',
'c': '-.-.',
'd': '-..',
'e': '.',
'f': '..-.',
'g': '--.',
'h': '....',
'i': '..',
'j': '.---',
'k': '-.-',
'l': '.-..',
'm': '--',
'n': '-.',
'o': '---',
'p': '.--.',
'q': '--.-',
'r': '.-.',
's': '...',
't': '-',
'u': '..-',
'v': '...-',
'w': '.--',
'x': '-..-',
'y': '-.--',
'z': '--..',
'1': '.----',
'2': '..---',
'3': '...--',
'4': '....-',
'5': '.....',
'6': '-....',
'7': '--...',
'8': '---..',
'9': '----.',
'0': '-----',
'.': '.-.-.-',
',': '--..--',
'?': '..--..',
'!': '-.-.--',
'/': '--.-.',
'(': '-.--.',
')': '-.--.-',
'&': '.-...',
':': '---...',
';': '-.-.-.',
'=': '-...-',
'+': '.-.-.',
'-': '-....-',
'_': '..--.-',
"'": '.----.',
'"': '.-..-.',
'$': '...-..-',
'@': '.--.-.',
' ': '^'
}
colors = {
'R': 0x1f0000,
'O': 0x1f1000,
'Y': 0x1f1900,
'G': 0x000f00,
'B': 0x00001f,
'I': 0x090010,
'V': 0x1d101d,
'W': 0x1f1f1f
}
color = colors['W']
unit_len = 75
char_queue = deque((), 2048, 1)
char_queue_lock = _thread.allocate_lock()
beep = False
def __init__(self, pin=0):
print("Morse()")
pycom.heartbeat(False)
if pin != 0:
self.pwm = machine.PWM(0, 1500)
self.pwm_channel = self.pwm.channel(0,
pin='P' + str(pin),
duty_cycle=0.0)
self.beep = True
_thread.start_new_thread(lambda: self.output_loop(), ())
def add_to_queue(self, char):
while True:
try:
with self.char_queue_lock:
self.char_queue.append(char)
return
except IndexError:
machine.idle()
def beep_on(self):
if self.beep:
self.pwm_channel.duty_cycle(0.5)
def beep_off(self):
if self.beep:
self.pwm_channel.duty_cycle(0.0)
def enqueue_message(self, msg, color='W'):
if msg[0:2] == '!!':
color_char = msg[2:3]
msg = msg[3:]
if color_char in self.colors:
color = color_char
else:
print("Illegal color code (" + color_char + ")")
code = ','.join(
map(lambda x: self.encoding.get(x, ''), list(msg.lower())))
code = color + code + '^,'
for c in list(code):
self.add_to_queue(c)
def light(self, length):
pycom.rgbled(self.color)
time.sleep_ms(length)
pycom.rgbled(0)
def output(self, c):
if c == '.':
self.beep_on()
self.light(self.unit_len)
self.beep_off()
time.sleep_ms(self.unit_len)
elif c == '-':
self.beep_on()
self.light(3 * self.unit_len)
self.beep_off()
time.sleep_ms(self.unit_len)
elif c == ',':
time.sleep_ms(2 * self.unit_len)
elif c == '^':
time.sleep_ms(5 * self.unit_len)
elif c in self.colors:
self.color = self.colors[c]
else:
print('Unknown character (' + c + ')')
def output_loop(self):
while True:
with self.char_queue_lock:
if self.char_queue:
c = self.char_queue.popleft()
else:
c = ''
if c != '':
self.output(c)
machine.idle()
import gc
from mqtt_as import MQTTClient
from config import config
import uasyncio as asyncio
from ucollections import deque # xxx need to change to uasyncio.queues
import json
from wificonfig import MQTT_SERVER
from artpart import ArtPart
import logging
logging.basicConfig(level=logging.DEBUG)
log = logging.getLogger("ArtDirector")
gc.collect()
q = deque((), 20)
# Subscription callback
def sub_cb(topic, msg):
print((topic, msg))
q.append((topic,msg))
print("len(q) == {}".format(len(q)))
async def wifi_han(state):
print('Wifi is {}'.format('up' if state else 'down'))
await asyncio.sleep(1)
# If you connect with clean_session True, must re-subscribe (MQTT spec 3.1.2.4)
async def conn_han(client):
await client.subscribe('mac/#', 1)
def __init__(self, maxsize=0):
super().__init__()
self.maxsize = maxsize
self._queue = deque((), maxsize)
wifi_ssid = 'DoESLiverpool'
wifi_password = '******'
mqtt_broker_hostname = '10.0.100.1'
mqtt_client_name = "{}{}".format('dinky-esp32-', machine.unique_id())
mqtt_topic_base = "dinky/"
channels = [
"motion",
]
state = {
"motion": 0,
}
motiontimes = deque((), 60)
# Set up neopixel string.
np = neopixel.NeoPixel(machine.Pin(4), number_of_leds, bpp=3)
# The callback that handles MQTT messages.
def mqtt_message_callback(topic, msg):
topic = topic.decode('utf-8')
msg = msg.decode('utf-8').strip()
print("MQTT message:", topic, msg)
if topic.startswith(mqtt_topic_base):
# Remove the mqtt_topic_base from the start of the topic,
# leaving only the subtopic
channel = topic[len(mqtt_topic_base):]
def __init__(self, uart: machine.UART):
"""Constructor.
"""
self._uart = uart
self._incoming_bytes_buffer = deque((), 300) # List/Deque of integers
self._received_packet_parser = MessagePacketParser()
def __init__(self, maxsize=0):
self.maxsize = maxsize
self._queue = deque((), 20)
def __init__(self, button_config, max_queue=10):
self.config = button_config
self.q = deque((), 10)
self.enabled = True
_loop = asyncio.get_event_loop()
_loop.create_task(self.loop_process())
try:
sys.getsizeof
except AttributeError:
print('SKIP')
raise SystemExit
print(sys.getsizeof(1) >= 2)
print(sys.getsizeof("") >= 2)
print(sys.getsizeof((1, 2)) >= 2)
print(sys.getsizeof([1, 2]) >= 2)
print(sys.getsizeof({1: 2}) >= 2)
class A:
pass
print(sys.getsizeof(A()) > 0)
try:
assert sys.getsizeof(set()) >= 2
except NameError:
pass
# Only test deque if we have it
try:
from ucollections import deque
assert sys.getsizeof(deque((), 1)) > 0
except ImportError:
pass
try:
try:
from ucollections import deque
except ImportError:
from collections import deque
except ImportError:
print("SKIP")
raise SystemExit
d = deque((), 2)
print(len(d))
print(bool(d))
try:
d.popleft()
except IndexError:
print("IndexError")
print(d.append(1))
print(len(d))
print(bool(d))
print(d.popleft())
print(len(d))
d.append(2)
print(d.popleft())
d.append(3)
d.append(4)
print(len(d))
print(d.popleft(), d.popleft())
def __init__(self,
loop,
my_id,
server,
port=9999,
ssid='',
pw='',
timeout=4000,
conn_cb=None,
conn_cb_args=None,
verbose=False,
led=None,
wdog=False):
"""
Create a client connection object
:param loop: uasyncio loop
:param my_id: client id
:param server: server address/ip
:param port: port the server app is running on
:param timeout: connection timeout
:param conn_cb: cb called when (dis-)connected to server
:param conn_cb_args: optional args to pass to connected_cb
:param verbose: debug output
:param led: led output for showing connection state, heartbeat
:param wdog: use a watchdog to prevent the device from getting stuck/frozen/...
writes to ensure that all messages are sent in order even if an outage occurs.
"""
self._loop = loop
self._my_id = my_id
self._server = server
self._ssid = ssid
self._pw = pw
self._port = port
self._to = timeout # Client and server timeout
self._tim_short = timeout // 10
self._tim_ka = timeout // 4 # Keepalive interval
self._concb = conn_cb
self._concbargs = () if conn_cb_args is None else conn_cb_args
self._verbose = verbose
self._led = led
if wdog:
if platform == 'pyboard':
self._wdt = machine.WDT(0, 20000)
def wdt():
def inner(feed=0): # Ignore control values
if not feed:
self._wdt.feed()
return inner
self._feed = wdt()
else:
def wdt(secs=0):
timer = machine.Timer(-1)
timer.init(period=1000,
mode=machine.Timer.PERIODIC,
callback=lambda t: self._feed())
cnt = secs
run = False # Disable until 1st feed
def inner(feed=WDT_CB):
nonlocal cnt, run, timer
if feed == 0: # Fixed timeout
cnt = secs
run = True
elif feed < 0: # WDT control/callback
if feed == WDT_CANCEL:
timer.deinit() # Permanent cancellation
elif feed == WDT_CB and run: # Timer callback and is running.
cnt -= 1
if cnt <= 0:
machine.reset()
return inner
self._feed = wdt(20)
else:
self._feed = lambda x: None
self._sta_if = network.WLAN(network.STA_IF)
ap = network.WLAN(network.AP_IF) # create access-point interface
ap.active(False) # deactivate the interface
self._sta_if.active(True)
gc.collect()
self._evfail = Event(100) # 100ms pause
self._s_lock = Lock() # For internal send conflict.
self._last_wr = utime.ticks_ms()
self._lineq = deque((), 5, True) # 5 entries, throw on overflow
self.connects = 0 # Connect count for test purposes/app access
self._sock = None
self._ok = False # Set after 1st successful read
self._tx_mid = 0 # sent mid +1, used for keeping messages in order
self._ack_pend = -1 # ACK which is expected to be received
gc.collect()
loop.create_task(self._run(loop))
import socket
import ustruct as struct
import time
import select
import network as net
from ucollections import deque
from machine import RTC
stopFlag = False
taskQueue = deque((), 10)
rtc = RTC()
def system_to_ntp_time(timestamp):
# #"""Convert a system time to a NTP time.
#
# Parameters:
# timestamp -- timestamp in system time
#
# Returns:
# corresponding NTP time
# #"""
espOffset = 946702800 - (
5 * 60 * 60
) # subtract 5hrs (confirmed this makes RTC match UTC+0 on ESP8266)
# Your hardware may vary
return timestamp + NTP.NTP_DELTA + espOffset #
def _to_int(timestamp):
# #"""Return the integral part of a timestamp.
# test sys.getsizeof() function
import sys
try:
sys.getsizeof
except AttributeError:
print('SKIP')
raise SystemExit
print(sys.getsizeof([1, 2]) >= 2)
print(sys.getsizeof({1: 2}) >= 2)
class A:
pass
print(sys.getsizeof(A()) > 0)
# Only test deque if we have it
try:
from ucollections import deque
assert sys.getsizeof(deque((), 1)) > 0
except ImportError:
pass
def __init__(self):
self._parser_state = self.PARSERSTATE_IDLE
self._current_message_packet = None
self._current_byte_counter = 0
self._current_integer = 0
self._packet_queue = deque((), 10)
try:
try:
from ucollections import deque
except ImportError:
from collections import deque
except ImportError:
print("SKIP")
raise SystemExit
d = deque((), 2)
print(len(d))
print(bool(d))
try:
d.popleft()
except IndexError:
print("IndexError")
print(d.append(1))
print(len(d))
print(bool(d))
print(d.popleft())
print(len(d))
d.append(2)
print(d.popleft())
d.append(3)
d.append(4)
print(len(d))
