def three_point_overwrite_pressed():
# Check that state is good for edit
if movemodes.selected_track == -1:
primary_txt = _("No Clips are selected!")
secondary_txt = _(
"You need to select clips to overwrite to perform this edit.")
dialogutils.info_message(primary_txt, secondary_txt,
gui.editor_window.window)
return
# Get data
track = get_track(movemodes.selected_track)
if editevent.track_lock_check_and_user_info(track,
three_point_overwrite_pressed,
"3 point overwrite"):
return
range_start_frame = track.clip_start(movemodes.selected_range_in)
out_clip = track.clips[movemodes.selected_range_out]
out_start = track.clip_start(movemodes.selected_range_out)
range_end_frame = out_start + out_clip.clip_out - out_clip.clip_in
range_length = range_end_frame - range_start_frame + 1 # calculated end is incl.
over_clip = _get_new_clip_from_clip_monitor()
if over_clip == None:
no_monitor_clip_info(gui.editor_window.window)
return
over_length = over_clip.mark_out - over_clip.mark_in + 1 # + 1 out incl ?????????? what if over_clip.mark_out == -1 ??????????
if over_length < range_length:
monitor_clip_too_short(gui.editor_window.window)
return
over_clip_out = over_clip.mark_in + range_length - 1 # -1 out incl
range_in = movemodes.selected_range_in
range_out = movemodes.selected_range_out
movemodes.clear_selected_clips() # edit consumes selection
updater.save_monitor_frame = False # hack to not get wrong value saved in MediaFile.current_frame
data = {
"track": track,
"clip": over_clip,
"clip_in": over_clip.mark_in,
"clip_out": over_clip_out,
"in_index": range_in,
"out_index": range_out
}
action = edit.three_point_overwrite_action(data)
action.do_edit()
if not editorstate.timeline_visible():
updater.display_sequence_in_monitor()
updater.display_tline_cut_frame(track, range_in)
def range_overwrite_pressed():
# Get data
track = current_sequence().get_first_active_track()
if editevent.track_lock_check_and_user_info(track, range_overwrite_pressed,
"range overwrite"):
return
# tractor is has mark in and mark
mark_in_frame = current_sequence().tractor.mark_in
mark_out_frame = current_sequence().tractor.mark_out
range_length = mark_out_frame - mark_in_frame + 1 # end is incl.
if mark_in_frame == -1 or mark_out_frame == -1:
primary_txt = _("Timeline Range not set!")
secondary_txt = _(
"You need to set Timeline Range using Mark In and Mark Out buttons\nto perform this edit."
)
dialogutils.info_message(primary_txt, secondary_txt,
gui.editor_window.window)
return
# Get over clip and check it overwrite range area
over_clip = _get_new_clip_from_clip_monitor()
if over_clip == None:
no_monitor_clip_info(gui.editor_window.window)
return
over_length = over_clip.mark_out - over_clip.mark_in + 1 # + 1 out incl
if over_length < range_length:
monitor_clip_too_short(gui.editor_window.window)
return
over_clip_out = over_clip.mark_in + range_length - 1
movemodes.clear_selected_clips() # edit consumes selection
updater.save_monitor_frame = False # hack to not get wrong value saved in MediaFile.current_frame
data = {
"track": track,
"clip": over_clip,
"clip_in": over_clip.mark_in,
"clip_out": over_clip_out,
"mark_in_frame": mark_in_frame,
"mark_out_frame": mark_out_frame + 1
} # +1 because mark is displayed and end of frame end this
# confirms to user expectation of
# of how this should work
action = edit.range_overwrite_action(data)
action.do_edit()
updater.display_tline_cut_frame(track,
track.get_clip_index_at(mark_in_frame))
def three_point_overwrite_pressed():
# Check that state is good for edit
if movemodes.selected_track == -1:
primary_txt = _("No Clips are selected!")
secondary_txt = _("You need to select clips to overwrite to perform this edit.")
dialogutils.info_message(primary_txt, secondary_txt, gui.editor_window.window)
return
# Get data
track = get_track(movemodes.selected_track)
if editevent.track_lock_check_and_user_info(track, three_point_overwrite_pressed, "3 point overwrite"):
return
range_start_frame = track.clip_start(movemodes.selected_range_in)
out_clip = track.clips[movemodes.selected_range_out]
out_start = track.clip_start(movemodes.selected_range_out)
range_end_frame = out_start + out_clip.clip_out - out_clip.clip_in
range_length = range_end_frame - range_start_frame + 1 # calculated end is incl.
over_clip = _get_new_clip_from_clip_monitor()
if over_clip == None:
no_monitor_clip_info(gui.editor_window.window)
return
over_length = over_clip.mark_out - over_clip.mark_in + 1 # + 1 out incl ?????????? what if over_clip.mark_out == -1 ??????????
if over_length < range_length:
monitor_clip_too_short(gui.editor_window.window)
return
over_clip_out = over_clip.mark_in + range_length - 1 # -1 out incl
range_in = movemodes.selected_range_in
range_out = movemodes.selected_range_out
movemodes.clear_selected_clips() # edit consumes selection
updater.save_monitor_frame = False # hack to not get wrong value saved in MediaFile.current_frame
data = {"track":track,
"clip":over_clip,
"clip_in":over_clip.mark_in,
"clip_out":over_clip_out,
"in_index":range_in,
"out_index":range_out}
action = edit.three_point_overwrite_action(data)
action.do_edit()
updater.display_tline_cut_frame(track, range_in)
def do_multiple_clip_insert(track, clips, tline_pos):
index = _get_insert_index(track, tline_pos)
# Can't put audio media on video track
for new_clip in clips:
if (new_clip.media_type == appconsts.AUDIO) and (track.type == appconsts.VIDEO):
_display_no_audio_on_video_msg(track)
return
movemodes.clear_selected_clips()
# Do edit
data = {"track": track, "clips": clips, "index": index}
action = edit.insert_multiple_action(data)
action.do_edit()
updater.display_tline_cut_frame(track, index)
def range_overwrite_pressed():
# Get data
track = current_sequence().get_first_active_track()
if editevent.track_lock_check_and_user_info(track, range_overwrite_pressed, "range overwrite"):
return
# tractor is has mark in and mark
mark_in_frame = current_sequence().tractor.mark_in
mark_out_frame = current_sequence().tractor.mark_out
range_length = mark_out_frame - mark_in_frame + 1 # end is incl.
if mark_in_frame == -1 or mark_out_frame == -1:
primary_txt = _("Timeline Range not set!")
secondary_txt = _("You need to set Timeline Range using Mark In and Mark Out buttons\nto perform this edit.")
dialogutils.info_message(primary_txt, secondary_txt, gui.editor_window.window)
return
# Get over clip and check it overwrite range area
over_clip = _get_new_clip_from_clip_monitor()
if over_clip == None:
no_monitor_clip_info(gui.editor_window.window)
return
over_length = over_clip.mark_out - over_clip.mark_in + 1 # + 1 out incl
if over_length < range_length:
monitor_clip_too_short(gui.editor_window.window)
return
over_clip_out = over_clip.mark_in + range_length - 1
movemodes.clear_selected_clips() # edit consumes selection
updater.save_monitor_frame = False # hack to not get wrong value saved in MediaFile.current_frame
data = {"track":track,
"clip":over_clip,
"clip_in":over_clip.mark_in,
"clip_out":over_clip_out,
"mark_in_frame":mark_in_frame,
"mark_out_frame":mark_out_frame + 1} # +1 because mark is displayed and end of frame end this
# confirms to user expectation of
# of how this should work
action = edit.range_overwrite_action(data)
action.do_edit()
updater.display_tline_cut_frame(track, track.get_clip_index_at(mark_in_frame))
def do_multiple_clip_insert(track, clips, tline_pos):
index = _get_insert_index(track, tline_pos)
# Can't put audio media on video track
for new_clip in clips:
if ((new_clip.media_type == appconsts.AUDIO)
and (track.type == appconsts.VIDEO)):
_display_no_audio_on_video_msg(track)
return
movemodes.clear_selected_clips()
# Do edit
data = {"track": track, "clips": clips, "index": index}
action = edit.insert_multiple_action(data)
action.do_edit()
updater.display_tline_cut_frame(track, index)
def do_clip_insert(track, new_clip, tline_pos):
index = _get_insert_index(track, tline_pos)
# Can't put audio media on video track
if ((new_clip.media_type == appconsts.AUDIO)
and (track.type == appconsts.VIDEO)):
_display_no_audio_on_video_msg(track)
return
movemodes.clear_selected_clips()
# Do edit
data = {"track":track,
"clip":new_clip,
"index":index,
"clip_in":new_clip.mark_in,
"clip_out":new_clip.mark_out}
action = edit.insert_action(data)
action.do_edit()
updater.display_tline_cut_frame(track, index)
def _attempt_dnd_overwrite(track, clip, frame):
# Can't put audio media on video track
if ((clip.media_type == appconsts.AUDIO)
and (track.type == appconsts.VIDEO)):
return
# Dropping on first available frame after last clip is append
# and is handled by insert code
if track.get_length() == frame:
return False
# Clip dropped after last clip on track
if track.get_length() < frame:
index = _get_insert_index(track, track.get_length())
movemodes.clear_selected_clips()
data = {"track":track,
"clip":clip,
"blank_length":frame - track.get_length(),
"index":index,
"clip_in":clip.mark_in,
"clip_out":clip.mark_out}
action = edit.dnd_after_track_end_action(data)
action.do_edit()
updater.display_tline_cut_frame(track, index + 1)
return True
else: # Clip dropped before end of last clip on track
index = track.get_clip_index_at(frame)
overwritten_clip = track.clips[index]
# dnd overwrites can only done on blank clips
# Drops on clips are considered inserts
if overwritten_clip.is_blanck_clip == False:
return False
drop_length = clip.mark_out - clip.mark_in + 1 # +1 , mark out incl.
blank_start = track.clip_start(index)
blank_end = track.clip_start(index + 1)
movemodes.clear_selected_clips()
# Clip dropped on first frame of blank
if blank_start == frame:
# If dropped clip longer then blank, replace blank
if frame + drop_length >= blank_end:
data = {"track":track,
"clip":clip,
"blank_length":blank_end - blank_start,
"index":index,
"clip_in":clip.mark_in}
action = edit.dnd_on_blank_replace_action(data)
action.do_edit()
else: # If dropped clip shorter then blank, replace start part of blank
data = {"track":track,
"clip":clip,
"blank_length":blank_end - blank_start,
"index":index,
"clip_in":clip.mark_in,
"clip_out":clip.mark_out}
action = edit.dnd_on_blank_start_action(data)
action.do_edit()
updater.display_tline_cut_frame(track, index)
return True
# Clip dropped after first frame of blank
if frame + drop_length >= blank_end:
# Overwrite end half of blank
data = {"track":track,
"clip":clip,
"overwritten_blank_length":frame - blank_start,
"blank_length":blank_end - blank_start,
"index":index,
"clip_in":clip.mark_in,
"clip_out":clip.mark_out}
action = edit.dnd_on_blank_end_action(data)
action.do_edit()
else: # Overwrite part of blank ei toimi
data = {"track":track,
"clip":clip,
"overwritten_start_frame":frame - blank_start,
"blank_length":blank_end - blank_start,
"index":index,
"clip_in":clip.mark_in,
"clip_out":clip.mark_out}
action = edit.dnd_on_blank_middle_action(data)
action.do_edit()
updater.display_tline_cut_frame(track, index + 1)
return True
return False # this won't be hit
def range_overwrite_pressed():
# Get data
track = current_sequence().get_first_active_track()
if editevent.track_lock_check_and_user_info(track, range_overwrite_pressed,
"range overwrite"):
return
# Get over clip and check it overwrite range area
over_clip = _get_new_clip_from_clip_monitor()
if over_clip == None:
no_monitor_clip_info(gui.editor_window.window)
return
# tractor is has mark in and mark
mark_in_frame = current_sequence().tractor.mark_in
mark_out_frame = current_sequence().tractor.mark_out
# Case timeline marked
if mark_in_frame != -1 and mark_out_frame != -1:
range_length = mark_out_frame - mark_in_frame + 1 # end is incl.
if over_clip.mark_in == -1:
# This actually never hit because mark in and mark out seem to first and last frame if nothing set
show_three_point_edit_not_defined()
return
over_length = over_clip.mark_out - over_clip.mark_in + 1 # + 1 out incl
if over_length < range_length:
monitor_clip_too_short(gui.editor_window.window)
return
over_clip_out = over_clip.mark_in + range_length - 1
# Case clip marked
elif over_clip.mark_out != -1 and over_clip.mark_in != -1:
range_length = over_clip.mark_out - over_clip.mark_in + 1 # end is incl.
if mark_in_frame == -1:
show_three_point_edit_not_defined()
return
over_length = track.get_length() - mark_in_frame + 1 # + 1 out incl
if over_length < range_length:
monitor_clip_too_short(gui.editor_window.window)
return
over_clip_out = over_clip.mark_out
mark_out_frame = mark_in_frame + range_length - 1 # -1 because it gets readded later
# case neither clip or timeline has both in and out points
else:
show_three_point_edit_not_defined()
return
movemodes.clear_selected_clips() # edit consumes selection
updater.save_monitor_frame = False # hack to not get wrong value saved in MediaFile.current_frame
data = {
"track": track,
"clip": over_clip,
"clip_in": over_clip.mark_in,
"clip_out": over_clip_out,
"mark_in_frame": mark_in_frame,
"mark_out_frame": mark_out_frame + 1
} # +1 because mark is displayed and end of frame end this
# confirms to user expectation of
# of how this should work
action = edit.range_overwrite_action(data)
action.do_edit()
updater.display_tline_cut_frame(track,
track.get_clip_index_at(mark_in_frame))
def _attempt_dnd_overwrite(track, clip, frame):
# Can't put audio media on video track
if ((clip.media_type == appconsts.AUDIO)
and (track.type == appconsts.VIDEO)):
return
# Dropping on first available frame after last clip is append
# and is handled by insert code
if track.get_length() == frame:
return False
# Clip dropped after last clip on track
if track.get_length() < frame:
index = _get_insert_index(track, track.get_length())
movemodes.clear_selected_clips()
data = {"track":track,
"clip":clip,
"blank_length":frame - track.get_length(),
"index":index,
"clip_in":clip.mark_in,
"clip_out":clip.mark_out}
action = edit.dnd_after_track_end_action(data)
action.do_edit()
updater.display_tline_cut_frame(track, index + 1)
return True
else: # Clip dropped before end of last clip on track
index = track.get_clip_index_at(frame)
overwritten_clip = track.clips[index]
# dnd overwrites can only done on blank clips
# Drops on clips are considered inserts
if overwritten_clip.is_blanck_clip == False:
return False
drop_length = clip.mark_out - clip.mark_in + 1 # +1 , mark out incl.
blank_start = track.clip_start(index)
blank_end = track.clip_start(index + 1)
movemodes.clear_selected_clips()
# Clip dropped on first frame of blank
if blank_start == frame:
# If dropped clip longer then blank, replace blank
if frame + drop_length >= blank_end:
data = {"track":track,
"clip":clip,
"blank_length":blank_end - blank_start,
"index":index,
"clip_in":clip.mark_in}
action = edit.dnd_on_blank_replace_action(data)
action.do_edit()
else: # If dropped clip shorter then blank, replace start part of blank
data = {"track":track,
"clip":clip,
"blank_length":blank_end - blank_start,
"index":index,
"clip_in":clip.mark_in,
"clip_out":clip.mark_out}
action = edit.dnd_on_blank_start_action(data)
action.do_edit()
updater.display_tline_cut_frame(track, index)
return True
# Clip dropped after first frame of blank
if frame + drop_length >= blank_end:
# Overwrite end half of blank
data = {"track":track,
"clip":clip,
"overwritten_blank_length":frame - blank_start,
"blank_length":blank_end - blank_start,
"index":index,
"clip_in":clip.mark_in,
"clip_out":clip.mark_out}
action = edit.dnd_on_blank_end_action(data)
action.do_edit()
else: # Overwrite part of blank ei toimi
data = {"track":track,
"clip":clip,
"overwritten_start_frame":frame - blank_start,
"blank_length":blank_end - blank_start,
"index":index,
"clip_in":clip.mark_in,
"clip_out":clip.mark_out}
action = edit.dnd_on_blank_middle_action(data)
action.do_edit()
updater.display_tline_cut_frame(track, index + 1)
return True
return False # this won't be hit
