def OnRun(self):
hexFile = intelHex.readHex(self.filename)
wx.CallAfter(self.updateLabel, "Connecting to machine...")
programmer = stk500v2.Stk500v2()
programmer.progressCallback = self.OnProgress
if self.port == 'AUTO':
for self.port in machineCom.serialList():
try:
programmer.connect(self.port)
break
except ispBase.IspError:
pass
else:
try:
programmer.connect(self.port)
except ispBase.IspError:
pass
if programmer.isConnected():
wx.CallAfter(self.updateLabel, "Uploading firmware...")
try:
programmer.programChip(hexFile)
wx.CallAfter(self.updateLabel, "Done!")
except ispBase.IspError as e:
wx.CallAfter(self.updateLabel, "Failed to write firmware.\n" + str(e))
programmer.close()
wx.CallAfter(self.okButton.Enable)
return
wx.MessageBox('Failed to find machine for firmware upgrade\nIs your machine connected to the PC?', 'Firmware update', wx.OK | wx.ICON_ERROR)
wx.CallAfter(self.Close)
def OnRun(self):
hexFile = intelHex.readHex(self.filename)
print "Connecting to machine."
#wx.CallAfter(self.updateLabel, "Connecting to machine...")
programmer = stk500v2.Stk500v2()
#programmer.progressCallback = self.OnProgress
if self.port == 'AUTO':
for self.port in machineCom.serialList():
try:
programmer.connect(self.port)
break
except ispBase.IspError:
pass
else:
try:
programmer.connect(self.port)
except ispBase.IspError:
pass
if programmer.isConnected():
#wx.CallAfter(self.updateLabel, "Uploading firmware...")
try:
programmer.programChip(hexFile)
print "Firmware successfully installed!"
#wx.CallAfter(self.updateLabel, "Done!\nInstalled firmware: %s" % (os.path.basename(self.filename)))
except ispBase.IspError as e:
print "Failed to upload firmware."
#wx.CallAfter(self.updateLabel, "Failed to write firmware.\n" + str(e))
programmer.close()
#wx.CallAfter(self.Close)
#wx.CallAfter(self.okButton.Enable)
return
#wx.MessageBox('Failed to find machine for firmware upgrade\nIs your machine connected to the PC?', 'Firmware update', wx.OK | wx.ICON_ERROR)
print "Failed to find machine. Ensure your machine is connected to your computer via USB."
def __init__(self, parent):
super(preferencesDialog, self).__init__(title="Preferences")
wx.EVT_CLOSE(self, self.OnClose)
self.oldExtruderAmount = int(profile.getPreference('extruder_amount'))
left, right, main = self.CreateConfigPanel(self)
configBase.TitleRow(left, 'Machine settings')
c = configBase.SettingRow(left, 'Steps per E', 'steps_per_e', '0', 'Amount of steps per mm filament extrusion', type = 'preference')
validators.validFloat(c, 0.1)
c = configBase.SettingRow(left, 'Machine width (mm)', 'machine_width', '205', 'Size of the machine in mm', type = 'preference')
validators.validFloat(c, 10.0)
c = configBase.SettingRow(left, 'Machine depth (mm)', 'machine_depth', '205', 'Size of the machine in mm', type = 'preference')
validators.validFloat(c, 10.0)
c = configBase.SettingRow(left, 'Machine height (mm)', 'machine_height', '200', 'Size of the machine in mm', type = 'preference')
validators.validFloat(c, 10.0)
c = configBase.SettingRow(left, 'Extruder count', 'extruder_amount', ['1', '2', '3', '4'], 'Amount of extruders in your machine.', type = 'preference')
for i in xrange(1, self.oldExtruderAmount):
configBase.TitleRow(left, 'Extruder %d' % (i+1))
c = configBase.SettingRow(left, 'Offset X', 'extruder_offset_x%d' % (i), '0.0', 'The offset of your secondary extruder compared to the primary.', type = 'preference')
validators.validFloat(c)
c = configBase.SettingRow(left, 'Offset Y', 'extruder_offset_y%d' % (i), '0.0', 'The offset of your secondary extruder compared to the primary.', type = 'preference')
validators.validFloat(c)
configBase.TitleRow(right, 'Filament settings')
c = configBase.SettingRow(right, 'Filament density (kg/m3)', 'filament_density', '1300', 'Weight of the filament per m3. Around 1300 for PLA. And around 1040 for ABS. This value is used to estimate the weight if the filament used for the print.', type = 'preference')
validators.validFloat(c, 500.0, 3000.0)
c = configBase.SettingRow(right, 'Filament cost (price/kg)', 'filament_cost_kg', '0', 'Cost of your filament per kg, to estimate the cost of the final print.', type = 'preference')
validators.validFloat(c, 0.0)
c = configBase.SettingRow(right, 'Filament cost (price/m)', 'filament_cost_meter', '0', 'Cost of your filament per meter, to estimate the cost of the final print.', type = 'preference')
validators.validFloat(c, 0.0)
configBase.TitleRow(right, 'Communication settings')
c = configBase.SettingRow(right, 'Serial port', 'serial_port', ['AUTO'] + machineCom.serialList(), 'Serial port to use for communication with the printer', type = 'preference')
c = configBase.SettingRow(right, 'Baudrate', 'serial_baud', '250000', 'Speed of the serial port communication\nNeeds to match your firmware settings\nCommon values are 250000, 115200, 57600', type = 'preference')
configBase.TitleRow(right, 'Slicer settings')
#c = configBase.SettingRow(right, 'Slicer selection', 'slicer', ['Cura (Skeinforge based)', 'Slic3r'], 'Which slicer to use to slice objects. Usually the Cura engine produces the best results. But Slic3r is developing fast and is faster with slicing.', type = 'preference')
c = configBase.SettingRow(right, 'Save profile on slice', 'save_profile', False, 'When slicing save the profile as [stl_file]_profile.ini next to the model.', type = 'preference')
configBase.TitleRow(right, 'SD Card settings')
if len(getDrives()) > 1:
c = configBase.SettingRow(right, 'SD card drive', 'sdpath', getDrives(), 'Location of your SD card, when using the copy to SD feature.', type = 'preference')
else:
c = configBase.SettingRow(right, 'SD card path', 'sdpath', '', 'Location of your SD card, when using the copy to SD feature.', type = 'preference')
c = configBase.SettingRow(right, 'Copy to SD with 8.3 names', 'sdshortnames', False, 'Save the gcode files in short filenames, so they are properly shown on the UltiController', type = 'preference')
self.okButton = wx.Button(left, -1, 'Ok')
left.GetSizer().Add(self.okButton, (left.GetSizer().GetRows(), 1))
self.okButton.Bind(wx.EVT_BUTTON, self.OnClose)
self.MakeModal(True)
main.Fit()
self.Fit()
def OnRun(self):
hexFile = intelHex.readHex(self.filename)
wx.CallAfter(self.updateLabel, "Connecting to machine...")
programmer = stk500v2.Stk500v2()
programmer.progressCallback = self.OnProgress
if self.port == 'AUTO':
for self.port in machineCom.serialList():
try:
programmer.connect(self.port)
break
except ispBase.IspError:
pass
else:
try:
programmer.connect(self.port)
except ispBase.IspError:
pass
if programmer.isConnected():
wx.CallAfter(self.updateLabel, "Uploading firmware...")
try:
programmer.programChip(hexFile)
wx.CallAfter(
self.updateLabel, "Done!\nInstalled firmware: %s" %
(os.path.basename(self.filename)))
except ispBase.IspError as e:
wx.CallAfter(self.updateLabel,
"Failed to write firmware.\n" + str(e))
programmer.close()
wx.CallAfter(self.okButton.Enable)
return
wx.MessageBox(
'Failed to find machine for firmware upgrade\nIs your machine connected to the PC?',
'Firmware update', wx.OK | wx.ICON_ERROR)
wx.CallAfter(self.Close)
def __init__(self, parent):
super(preferencesDialog, self).__init__(title="Preferences")
wx.EVT_CLOSE(self, self.OnClose)
self.parent = parent
self.oldExtruderAmount = int(profile.getPreference('extruder_amount'))
left, right, main = self.CreateConfigPanel(self)
configBase.TitleRow(left, 'Machine settings')
c = configBase.SettingRow(left,
'Steps per E',
'steps_per_e',
'0',
'Amount of steps per mm filament extrusion',
type='preference')
validators.validFloat(c, 0.1)
c = configBase.SettingRow(left,
'Machine width (mm)',
'machine_width',
'205',
'Size of the machine in mm',
type='preference')
validators.validFloat(c, 10.0)
c = configBase.SettingRow(left,
'Machine depth (mm)',
'machine_depth',
'205',
'Size of the machine in mm',
type='preference')
validators.validFloat(c, 10.0)
c = configBase.SettingRow(left,
'Machine height (mm)',
'machine_height',
'200',
'Size of the machine in mm',
type='preference')
validators.validFloat(c, 10.0)
c = configBase.SettingRow(left,
'Extruder count',
'extruder_amount', ['1', '2', '3', '4'],
'Amount of extruders in your machine.',
type='preference')
c = configBase.SettingRow(
left,
'Heated bed',
'has_heated_bed',
False,
'If you have an heated bed, this enabled heated bed settings',
type='preference')
for i in xrange(1, self.oldExtruderAmount):
configBase.TitleRow(left, 'Extruder %d' % (i + 1))
c = configBase.SettingRow(
left,
'Offset X',
'extruder_offset_x%d' % (i),
'0.0',
'The offset of your secondary extruder compared to the primary.',
type='preference')
validators.validFloat(c)
c = configBase.SettingRow(
left,
'Offset Y',
'extruder_offset_y%d' % (i),
'0.0',
'The offset of your secondary extruder compared to the primary.',
type='preference')
validators.validFloat(c)
configBase.TitleRow(left, 'Colours')
c = configBase.SettingRow(left,
'Model colour',
'model_colour',
wx.Colour(0, 0, 0),
'',
type='preference')
for i in xrange(1, self.oldExtruderAmount):
c = configBase.SettingRow(left,
'Model colour (%d)' % (i + 1),
'model_colour%d' % (i + 1),
wx.Colour(0, 0, 0),
'',
type='preference')
configBase.TitleRow(right, 'Filament settings')
c = configBase.SettingRow(
right,
'Filament density (kg/m3)',
'filament_density',
'1300',
'Weight of the filament per m3. Around 1300 for PLA. And around 1040 for ABS. This value is used to estimate the weight if the filament used for the print.',
type='preference')
validators.validFloat(c, 500.0, 3000.0)
c = configBase.SettingRow(
right,
'Filament cost (price/kg)',
'filament_cost_kg',
'0',
'Cost of your filament per kg, to estimate the cost of the final print.',
type='preference')
validators.validFloat(c, 0.0)
c = configBase.SettingRow(
right,
'Filament cost (price/m)',
'filament_cost_meter',
'0',
'Cost of your filament per meter, to estimate the cost of the final print.',
type='preference')
validators.validFloat(c, 0.0)
configBase.TitleRow(right, 'Communication settings')
c = configBase.SettingRow(
right,
'Serial port',
'serial_port', ['AUTO'] + machineCom.serialList(),
'Serial port to use for communication with the printer',
type='preference')
c = configBase.SettingRow(
right,
'Baudrate',
'serial_baud', ['AUTO'] + map(str, machineCom.baudrateList()),
'Speed of the serial port communication\nNeeds to match your firmware settings\nCommon values are 250000, 115200, 57600',
type='preference')
configBase.TitleRow(right, 'Slicer settings')
#c = configBase.SettingRow(right, 'Slicer selection', 'slicer', ['Cura (Skeinforge based)', 'Slic3r'], 'Which slicer to use to slice objects. Usually the Cura engine produces the best results. But Slic3r is developing fast and is faster with slicing.', type = 'preference')
c = configBase.SettingRow(
right,
'Save profile on slice',
'save_profile',
False,
'When slicing save the profile as [stl_file]_profile.ini next to the model.',
type='preference')
configBase.TitleRow(right, 'SD Card settings')
if len(getDrives()) > 1:
c = configBase.SettingRow(
right,
'SD card drive',
'sdpath',
getDrives(),
'Location of your SD card, when using the copy to SD feature.',
type='preference')
else:
c = configBase.SettingRow(
right,
'SD card path',
'sdpath',
'',
'Location of your SD card, when using the copy to SD feature.',
type='preference')
c = configBase.SettingRow(
right,
'Copy to SD with 8.3 names',
'sdshortnames',
False,
'Save the gcode files in short filenames, so they are properly shown on the UltiController',
type='preference')
self.okButton = wx.Button(right, -1, 'Ok')
right.GetSizer().Add(self.okButton, (right.GetSizer().GetRows(), 0))
self.okButton.Bind(wx.EVT_BUTTON, self.OnClose)
self.MakeModal(True)
main.Fit()
self.Fit()
def __init__(self, parent):
super(preferencesDialog, self).__init__(title="Preferences")
wx.EVT_CLOSE(self, self.OnClose)
self.oldExtruderAmount = int(profile.getPreference("extruder_amount"))
left, right, main = self.CreateConfigPanel(self)
configBase.TitleRow(left, "Machine settings")
c = configBase.SettingRow(
left, "Steps per E", "steps_per_e", "0", "Amount of steps per mm filament extrusion", type="preference"
)
validators.validFloat(c, 0.1)
c = configBase.SettingRow(
left, "Machine width (mm)", "machine_width", "205", "Size of the machine in mm", type="preference"
)
validators.validFloat(c, 10.0)
c = configBase.SettingRow(
left, "Machine depth (mm)", "machine_depth", "205", "Size of the machine in mm", type="preference"
)
validators.validFloat(c, 10.0)
c = configBase.SettingRow(
left, "Machine height (mm)", "machine_height", "200", "Size of the machine in mm", type="preference"
)
validators.validFloat(c, 10.0)
c = configBase.SettingRow(
left,
"Extruder count",
"extruder_amount",
["1", "2", "3", "4"],
"Amount of extruders in your machine.",
type="preference",
)
for i in xrange(1, self.oldExtruderAmount):
configBase.TitleRow(left, "Extruder %d" % (i + 1))
c = configBase.SettingRow(
left,
"Offset X",
"extruder_offset_x%d" % (i),
"0.0",
"The offset of your secondary extruder compared to the primary.",
type="preference",
)
validators.validFloat(c)
c = configBase.SettingRow(
left,
"Offset Y",
"extruder_offset_y%d" % (i),
"0.0",
"The offset of your secondary extruder compared to the primary.",
type="preference",
)
validators.validFloat(c)
configBase.TitleRow(right, "Filament settings")
c = configBase.SettingRow(
right,
"Filament density (kg/m3)",
"filament_density",
"1300",
"Weight of the filament per m3. Around 1300 for PLA. And around 1040 for ABS. This value is used to estimate the weight if the filament used for the print.",
type="preference",
)
validators.validFloat(c, 500.0, 3000.0)
c = configBase.SettingRow(
right,
"Filament cost (price/kg)",
"filament_cost_kg",
"0",
"Cost of your filament per kg, to estimate the cost of the final print.",
type="preference",
)
validators.validFloat(c, 0.0)
c = configBase.SettingRow(
right,
"Filament cost (price/m)",
"filament_cost_meter",
"0",
"Cost of your filament per meter, to estimate the cost of the final print.",
type="preference",
)
validators.validFloat(c, 0.0)
configBase.TitleRow(right, "Communication settings")
c = configBase.SettingRow(
right,
"Serial port",
"serial_port",
["AUTO"] + machineCom.serialList(),
"Serial port to use for communication with the printer",
type="preference",
)
c = configBase.SettingRow(
right,
"Baudrate",
"serial_baud",
["AUTO"] + map(str, machineCom.baudrateList()),
"Speed of the serial port communication\nNeeds to match your firmware settings\nCommon values are 250000, 115200, 57600",
type="preference",
)
configBase.TitleRow(right, "Slicer settings")
# c = configBase.SettingRow(right, 'Slicer selection', 'slicer', ['Cura (Skeinforge based)', 'Slic3r'], 'Which slicer to use to slice objects. Usually the Cura engine produces the best results. But Slic3r is developing fast and is faster with slicing.', type = 'preference')
c = configBase.SettingRow(
right,
"Save profile on slice",
"save_profile",
False,
"When slicing save the profile as [stl_file]_profile.ini next to the model.",
type="preference",
)
configBase.TitleRow(right, "SD Card settings")
if len(getDrives()) > 1:
c = configBase.SettingRow(
right,
"SD card drive",
"sdpath",
getDrives(),
"Location of your SD card, when using the copy to SD feature.",
type="preference",
)
else:
c = configBase.SettingRow(
right,
"SD card path",
"sdpath",
"",
"Location of your SD card, when using the copy to SD feature.",
type="preference",
)
c = configBase.SettingRow(
right,
"Copy to SD with 8.3 names",
"sdshortnames",
False,
"Save the gcode files in short filenames, so they are properly shown on the UltiController",
type="preference",
)
self.okButton = wx.Button(left, -1, "Ok")
left.GetSizer().Add(self.okButton, (left.GetSizer().GetRows(), 1))
self.okButton.Bind(wx.EVT_BUTTON, self.OnClose)
self.MakeModal(True)
main.Fit()
self.Fit()
