def OnSlice(self, e):
put = profile.setTempOverride
oldProfile = profile.getGlobalProfileString()
put('model_multiply_x', '1')
put('model_multiply_y', '1')
put('enable_raft', 'False')
put('add_start_end_gcode', 'False')
put('gcode_extension', 'project_tmp')
clearZ = 0
actionList = []
for item in self.list:
if item.profile != None and os.path.isfile(item.profile):
profile.loadGlobalProfile(item.profile)
put('machine_center_x', item.centerX - self.extruderOffset[item.extruder].x)
put('machine_center_y', item.centerY - self.extruderOffset[item.extruder].y)
put('model_scale', item.scale)
put('flip_x', item.flipX)
put('flip_y', item.flipY)
put('flip_z', item.flipZ)
put('model_rotate_base', item.rotate)
put('swap_xz', item.swapXZ)
put('swap_yz', item.swapYZ)
action = Action()
action.sliceCmd = sliceRun.getSliceCommand(item.filename)
action.centerX = item.centerX
action.centerY = item.centerY
action.extruder = item.extruder
action.filename = item.filename
clearZ = max(clearZ, item.getMaximum().z * item.scale + 5.0)
action.clearZ = clearZ
action.leaveResultForNextSlice = False
action.usePreviousSlice = False
actionList.append(action)
if self.list.index(item) > 0 and item.isSameExceptForPosition(self.list[self.list.index(item)-1]):
actionList[-2].leaveResultForNextSlice = True
actionList[-1].usePreviousSlice = True
if item.profile != None:
profile.loadGlobalProfileFromString(oldProfile)
#Restore the old profile.
profile.resetTempOverride()
dlg=wx.FileDialog(self, "Save project gcode file", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_SAVE)
dlg.SetWildcard("GCode file (*.gcode)|*.gcode")
if dlg.ShowModal() != wx.ID_OK:
dlg.Destroy()
return
resultFilename = dlg.GetPath()
dlg.Destroy()
pspw = ProjectSliceProgressWindow(actionList, resultFilename)
pspw.extruderOffset = self.extruderOffset
pspw.Centre()
pspw.Show(True)
def _stitchMultiExtruder(self):
files = []
resultFile = open(sliceRun.getExportFilename(self.filelist[0]), "w")
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('start.gcode'))
for filename in self.filelist:
if os.path.isfile(
sliceRun.getExportFilename(filename, 'multi_extrude_tmp')):
files.append(
open(
sliceRun.getExportFilename(filename,
'multi_extrude_tmp'), "r"))
else:
return
currentExtruder = 0
resultFile.write('T%d\n' % (currentExtruder))
layerNr = -1
hasLine = True
while hasLine:
hasLine = False
for f in files:
layerHasLine = False
for line in f:
hasLine = True
if line.startswith(';LAYER:'):
break
if 'Z' in line:
lastZ = float(re.search('Z([^\s]+)', line).group(1))
if not layerHasLine:
nextExtruder = files.index(f)
resultFile.write(';LAYER:%d\n' % (layerNr))
resultFile.write(';EXTRUDER:%d\n' % (nextExtruder))
if nextExtruder != currentExtruder:
resultFile.write(';TYPE:CUSTOM\n')
profile.setTempOverride('extruder', nextExtruder)
resultFile.write(
profile.getAlterationFileContents(
'switchExtruder.gcode'))
profile.resetTempOverride()
currentExtruder = nextExtruder
layerHasLine = True
resultFile.write(line)
layerNr += 1
for f in files:
f.close()
for filename in self.filelist:
os.remove(sliceRun.getExportFilename(filename,
'multi_extrude_tmp'))
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('end.gcode'))
resultFile.close()
def __init__(self, mainWindow, parent, filelist):
wx.Panel.__init__(self, parent, -1)
self.mainWindow = mainWindow
self.filelist = filelist
self.abort = False
box = wx.StaticBox(self, -1, filelist[0])
self.sizer = wx.StaticBoxSizer(box, wx.HORIZONTAL)
mainSizer = wx.BoxSizer(wx.VERTICAL)
mainSizer.Add(self.sizer, 0, flag=wx.EXPAND)
self.statusText = wx.StaticText(self, -1, "Starting...")
self.progressGauge = wx.Gauge(self, -1)
self.progressGauge.SetRange(10000 * len(filelist))
self.abortButton = wx.Button(self, -1, "X", style=wx.BU_EXACTFIT)
self.sizer.Add(self.statusText, 2, flag=wx.ALIGN_CENTER)
self.sizer.Add(self.progressGauge, 2)
self.sizer.Add(self.abortButton, 0)
self.Bind(wx.EVT_BUTTON, self.OnAbort, self.abortButton)
self.SetSizer(mainSizer)
self.prevStep = 'start'
self.totalDoneFactor = 0.0
self.startTime = time.time()
if profile.getPreference('save_profile') == 'True':
profile.saveGlobalProfile(
self.filelist[0][:self.filelist[0].rfind('.')] +
"_profile.ini")
cmdList = []
for filename in self.filelist:
idx = self.filelist.index(filename)
#print filename, idx
if idx > 0:
profile.setTempOverride('fan_enabled', 'False')
profile.setTempOverride('skirt_line_count', '0')
profile.setTempOverride(
'machine_center_x',
profile.getProfileSettingFloat('machine_center_x') -
profile.getPreferenceFloat('extruder_offset_x%d' % (idx)))
profile.setTempOverride(
'machine_center_y',
profile.getProfileSettingFloat('machine_center_y') -
profile.getPreferenceFloat('extruder_offset_y%d' % (idx)))
profile.setTempOverride('alternative_center', self.filelist[0])
if len(self.filelist) > 1:
profile.setTempOverride('add_start_end_gcode', 'False')
profile.setTempOverride('gcode_extension', 'multi_extrude_tmp')
cmdList.append(sliceRun.getSliceCommand(filename))
profile.resetTempOverride()
self.thread = WorkerThread(self, filelist, cmdList)
def _stitchMultiExtruder(self):
files = []
resultFile = open(sliceRun.getExportFilename(self.filelist[0]), "w")
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('start.gcode'))
for filename in self.filelist:
if os.path.isfile(sliceRun.getExportFilename(filename, 'multi_extrude_tmp')):
files.append(open(sliceRun.getExportFilename(filename, 'multi_extrude_tmp'), "r"))
else:
return
currentExtruder = 0
resultFile.write('T%d\n' % (currentExtruder))
layerNr = -1
hasLine = True
while hasLine:
hasLine = False
for f in files:
layerHasLine = False
for line in f:
hasLine = True
if line.startswith(';LAYER:'):
break
if 'Z' in line:
lastZ = float(re.search('Z([^\s]+)', line).group(1))
if not layerHasLine:
nextExtruder = files.index(f)
resultFile.write(';LAYER:%d\n' % (layerNr))
resultFile.write(';EXTRUDER:%d\n' % (nextExtruder))
if nextExtruder != currentExtruder:
resultFile.write(';TYPE:CUSTOM\n')
profile.setTempOverride('extruder', nextExtruder)
resultFile.write(profile.getAlterationFileContents('switchExtruder.gcode'))
profile.resetTempOverride()
currentExtruder = nextExtruder
layerHasLine = True
resultFile.write(line)
layerNr += 1
for f in files:
f.close()
for filename in self.filelist:
os.remove(sliceRun.getExportFilename(filename, 'multi_extrude_tmp'))
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('end.gcode'))
resultFile.close()
def __init__(self, mainWindow, parent, filelist):
wx.Panel.__init__(self, parent, -1)
self.mainWindow = mainWindow
self.filelist = filelist
self.abort = False
box = wx.StaticBox(self, -1, filelist[0])
self.sizer = wx.StaticBoxSizer(box, wx.HORIZONTAL)
mainSizer = wx.BoxSizer(wx.VERTICAL)
mainSizer.Add(self.sizer, 0, flag=wx.EXPAND)
self.statusText = wx.StaticText(self, -1, "Starting...")
self.progressGauge = wx.Gauge(self, -1)
self.progressGauge.SetRange(10000 * len(filelist))
self.abortButton = wx.Button(self, -1, "X", style=wx.BU_EXACTFIT)
self.sizer.Add(self.statusText, 2, flag=wx.ALIGN_CENTER )
self.sizer.Add(self.progressGauge, 2)
self.sizer.Add(self.abortButton, 0)
self.Bind(wx.EVT_BUTTON, self.OnAbort, self.abortButton)
self.SetSizer(mainSizer)
self.prevStep = 'start'
self.totalDoneFactor = 0.0
self.startTime = time.time()
if profile.getPreference('save_profile') == 'True':
profile.saveGlobalProfile(self.filelist[0][: self.filelist[0].rfind('.')] + "_profile.ini")
cmdList = []
for filename in self.filelist:
idx = self.filelist.index(filename)
#print filename, idx
if idx > 0:
profile.setTempOverride('fan_enabled', 'False')
profile.setTempOverride('skirt_line_count', '0')
profile.setTempOverride('machine_center_x', profile.getProfileSettingFloat('machine_center_x') - profile.getPreferenceFloat('extruder_offset_x%d' % (idx)))
profile.setTempOverride('machine_center_y', profile.getProfileSettingFloat('machine_center_y') - profile.getPreferenceFloat('extruder_offset_y%d' % (idx)))
profile.setTempOverride('alternative_center', self.filelist[0])
if len(self.filelist) > 1:
profile.setTempOverride('add_start_end_gcode', 'False')
profile.setTempOverride('gcode_extension', 'multi_extrude_tmp')
cmdList.append(sliceRun.getSliceCommand(filename))
profile.resetTempOverride()
self.thread = WorkerThread(self, filelist, cmdList)
def OnRun(self):
resultFile = open(self.resultFilename, "w")
put = profile.setTempOverride
self.progressLog = []
for action in self.actionList:
wx.CallAfter(self.SetTitle, "Building: [%d/%d]" % (self.actionList.index(action) + 1, len(self.actionList)))
if not action.usePreviousSlice:
p = subprocess.Popen(action.sliceCmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
line = p.stdout.readline()
maxValue = 1
while(len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.SetProgress, progress[0], int(progress[1]), maxValue)
else:
print line
self.progressLog.append(line)
wx.CallAfter(self.statusText.SetLabel, line)
if self.abort:
p.terminate()
wx.CallAfter(self.statusText.SetLabel, "Aborted by user.")
resultFile.close()
return
line = p.stdout.readline()
self.returnCode = p.wait()
put('machine_center_x', action.centerX - self.extruderOffset[action.extruder][0])
put('machine_center_y', action.centerY - self.extruderOffset[action.extruder][1])
put('clear_z', action.clearZ)
put('extruder', action.extruder)
put('print_temperature', action.temperature)
if action == self.actionList[0]:
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write('T%d\n' % (action.extruder))
currentExtruder = action.extruder
prevTemp = action.temperature
resultFile.write(profile.getAlterationFileContents('start.gcode'))
else:
#reset the extrusion length, and move to the next object center.
resultFile.write(';TYPE:CUSTOM\n')
if prevTemp != action.temperature:
resultFile.write('M104 S%d\n' % (int(action.temperature)))
prevTemp = action.temperature
resultFile.write(profile.getAlterationFileContents('nextobject.gcode'))
resultFile.write(';PRINTNR:%d\n' % self.actionList.index(action))
profile.resetTempOverride()
if not action.usePreviousSlice:
f = open(sliceRun.getExportFilename(action.filename, "project_tmp"), "r")
data = f.read(4096)
while data != '':
resultFile.write(data)
data = f.read(4096)
f.close()
savedCenterX = action.centerX
savedCenterY = action.centerY
else:
f = open(sliceRun.getExportFilename(action.filename, "project_tmp"), "r")
for line in f:
if line[0] != ';':
if 'X' in line:
line = self._adjustNumberInLine(line, 'X', action.centerX - savedCenterX)
if 'Y' in line:
line = self._adjustNumberInLine(line, 'Y', action.centerY - savedCenterY)
resultFile.write(line)
f.close()
if not action.leaveResultForNextSlice:
os.remove(sliceRun.getExportFilename(action.filename, "project_tmp"))
wx.CallAfter(self.progressGauge.SetValue, 10000)
self.totalDoneFactor = 0.0
wx.CallAfter(self.progressGauge2.SetValue, self.actionList.index(action) + 1)
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write('G1 Z%f F%f\n' % (self.actionList[-1].clearZ, profile.getProfileSettingFloat('max_z_speed') * 60))
resultFile.write(profile.getAlterationFileContents('end.gcode'))
resultFile.close()
gcode = gcodeInterpreter.gcode()
gcode.load(self.resultFilename)
self.abort = True
sliceTime = time.time() - self.sliceStartTime
status = "Build: %s" % (self.resultFilename)
status += "\nSlicing took: %02d:%02d" % (sliceTime / 60, sliceTime % 60)
status += "\nFilament: %.2fm %.2fg" % (gcode.extrusionAmount / 1000, gcode.calculateWeight() * 1000)
status += "\nPrint time: %02d:%02d" % (int(gcode.totalMoveTimeMinute / 60), int(gcode.totalMoveTimeMinute % 60))
cost = gcode.calculateCost()
if cost != False:
status += "\nCost: %s" % (cost)
profile.replaceGCodeTags(self.resultFilename, gcode)
wx.CallAfter(self.statusText.SetLabel, status)
wx.CallAfter(self.OnSliceDone)
def OnRun(self):
resultFile = open(self.resultFilename, "w")
put = profile.setTempOverride
self.progressLog = []
for action in self.actionList:
wx.CallAfter(self.SetTitle, "Building: [%d/%d]" % (self.actionList.index(action) + 1, len(self.actionList)))
if not action.usePreviousSlice:
p = sliceRun.startSliceCommandProcess(action.sliceCmd)
line = p.stdout.readline()
maxValue = 1
while(len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.SetProgress, progress[0], int(progress[1]), maxValue)
else:
self.progressLog.append(line)
wx.CallAfter(self.statusText.SetLabel, line)
if self.abort:
p.terminate()
wx.CallAfter(self.statusText.SetLabel, "Aborted by user.")
resultFile.close()
return
line = p.stdout.readline()
self.returnCode = p.wait()
put('machine_center_x', action.centerX - self.extruderOffset[action.extruder][0])
put('machine_center_y', action.centerY - self.extruderOffset[action.extruder][1])
put('clear_z', action.clearZ)
put('extruder', action.extruder)
put('print_temperature', action.temperature)
if action == self.actionList[0]:
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write('T%d\n' % (action.extruder))
currentExtruder = action.extruder
prevTemp = action.temperature
startGCode = profile.getAlterationFileContents('start.gcode')
startGCode = startGCode.replace('?filename?', 'Multiple files')
resultFile.write(startGCode)
else:
#reset the extrusion length, and move to the next object center.
resultFile.write(';TYPE:CUSTOM\n')
if prevTemp != action.temperature and action.temperature > 0:
resultFile.write('M104 S%d\n' % (int(action.temperature)))
prevTemp = action.temperature
resultFile.write(profile.getAlterationFileContents('nextobject.gcode'))
resultFile.write(';PRINTNR:%d\n' % self.actionList.index(action))
profile.resetTempOverride()
if not action.usePreviousSlice:
f = open(sliceRun.getExportFilename(action.filename, "project_tmp"), "r")
data = f.read(4096)
while data != '':
resultFile.write(data)
data = f.read(4096)
f.close()
savedCenterX = action.centerX
savedCenterY = action.centerY
else:
f = open(sliceRun.getExportFilename(action.filename, "project_tmp"), "r")
for line in f:
if line[0] != ';':
if 'X' in line:
line = self._adjustNumberInLine(line, 'X', action.centerX - savedCenterX)
if 'Y' in line:
line = self._adjustNumberInLine(line, 'Y', action.centerY - savedCenterY)
resultFile.write(line)
f.close()
if not action.leaveResultForNextSlice:
os.remove(sliceRun.getExportFilename(action.filename, "project_tmp"))
wx.CallAfter(self.progressGauge.SetValue, 10000)
self.totalDoneFactor = 0.0
wx.CallAfter(self.progressGauge2.SetValue, self.actionList.index(action) + 1)
resultFile.write(';TYPE:CUSTOM\n')
if len(self.actionList) > 1 and self.actionList[-1].clearZ > 1:
#only move to higher Z if we have sliced more then 1 object. This solves the "move into print after printing" problem with the print-all-at-once option.
resultFile.write('G1 Z%f F%f\n' % (self.actionList[-1].clearZ, profile.getProfileSettingFloat('max_z_speed') * 60))
resultFile.write(profile.getAlterationFileContents('end.gcode'))
resultFile.close()
gcode = gcodeInterpreter.gcode()
gcode.load(self.resultFilename)
self.abort = True
sliceTime = time.time() - self.sliceStartTime
status = "Build: %s" % (self.resultFilename)
status += "\nSlicing took: %02d:%02d" % (sliceTime / 60, sliceTime % 60)
status += "\nFilament: %.2fm %.2fg" % (gcode.extrusionAmount / 1000, gcode.calculateWeight() * 1000)
status += "\nPrint time: %02d:%02d" % (int(gcode.totalMoveTimeMinute / 60), int(gcode.totalMoveTimeMinute % 60))
cost = gcode.calculateCost()
if cost != False:
status += "\nCost: %s" % (cost)
profile.replaceGCodeTags(self.resultFilename, gcode)
wx.CallAfter(self.statusText.SetLabel, status)
wx.CallAfter(self.OnSliceDone)
def OnSlice(self, e):
dlg=wx.FileDialog(self, "Save project gcode file", os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_SAVE)
dlg.SetWildcard("GCode file (*.gcode)|*.gcode")
if dlg.ShowModal() != wx.ID_OK:
dlg.Destroy()
return
resultFilename = dlg.GetPath()
dlg.Destroy()
put = profile.setTempOverride
oldProfile = profile.getGlobalProfileString()
put('add_start_end_gcode', 'False')
put('gcode_extension', 'project_tmp')
if self.printMode == 0:
clearZ = 0
actionList = []
for item in self.list:
if item.profile != None and os.path.isfile(item.profile):
profile.loadGlobalProfile(item.profile)
put('machine_center_x', item.centerX - self.extruderOffset[item.extruder][0])
put('machine_center_y', item.centerY - self.extruderOffset[item.extruder][1])
put('model_scale', item.scale)
put('flip_x', item.flipX)
put('flip_y', item.flipY)
put('flip_z', item.flipZ)
put('model_rotate_base', item.rotate)
put('swap_xz', item.swapXZ)
put('swap_yz', item.swapYZ)
action = Action()
action.sliceCmd = sliceRun.getSliceCommand(item.filename)
action.centerX = item.centerX
action.centerY = item.centerY
action.temperature = profile.getProfileSettingFloat('print_temperature')
action.extruder = item.extruder
action.filename = item.filename
clearZ = max(clearZ, item.getSize()[2] * item.scale + 5.0)
action.clearZ = clearZ
action.leaveResultForNextSlice = False
action.usePreviousSlice = False
actionList.append(action)
if self.list.index(item) > 0 and item.isSameExceptForPosition(self.list[self.list.index(item)-1]):
actionList[-2].leaveResultForNextSlice = True
actionList[-1].usePreviousSlice = True
if item.profile != None:
profile.loadGlobalProfileFromString(oldProfile)
else:
self._saveCombinedSTL(resultFilename + "_temp_.stl")
put('model_scale', 1.0)
put('flip_x', False)
put('flip_y', False)
put('flip_z', False)
put('model_rotate_base', 0)
put('swap_xz', False)
put('swap_yz', False)
actionList = []
action = Action()
action.sliceCmd = sliceRun.getSliceCommand(resultFilename + "_temp_.stl")
action.centerX = profile.getProfileSettingFloat('machine_center_x')
action.centerY = profile.getProfileSettingFloat('machine_center_y')
action.temperature = profile.getProfileSettingFloat('print_temperature')
action.extruder = 0
action.filename = resultFilename + "_temp_.stl"
action.clearZ = 0
action.leaveResultForNextSlice = False
action.usePreviousSlice = False
actionList.append(action)
#Restore the old profile.
profile.resetTempOverride()
pspw = ProjectSliceProgressWindow(actionList, resultFilename)
pspw.extruderOffset = self.extruderOffset
pspw.Centre()
pspw.Show(True)