Esempio n. 1
0
    def delete(self, vm_name, dev_name):
        try:
            bus_type = self.lookup(vm_name, dev_name)['bus']
            dom = VMModel.get_vm(vm_name, self.conn)
        except NotFoundError:
            raise

        if (bus_type not in HOTPLUG_TYPE
                and DOM_STATE_MAP[dom.info()[0]] != 'shutoff'):
            raise InvalidOperation('KCHVMSTOR0011E')

        try:
            disk = get_device_node(dom, dev_name)
            path = get_vm_disk_info(dom, dev_name)['path']
            if path is None or len(path) < 1:
                path = self.lookup(vm_name, dev_name)['path']
            # This has to be done before it's detached. If it wasn't
            #   in the obj store, its ref count would have been updated
            #   by get_disk_used_by()
            if path is not None:
                used_by = get_disk_used_by(self.objstore, self.conn, path)
            else:
                wok_log.error("Unable to decrement volume used_by on"
                              " delete because no path could be found.")
            dom.detachDeviceFlags(etree.tostring(disk),
                                  get_vm_config_flag(dom, 'all'))
        except Exception as e:
            raise OperationFailed("KCHVMSTOR0010E", {'error': e.message})

        if used_by is not None and vm_name in used_by:
            used_by.remove(vm_name)
            set_disk_used_by(self.objstore, path, used_by)
        else:
            wok_log.error("Unable to update %s:%s used_by on delete." %
                          (vm_name, dev_name))
Esempio n. 2
0
    def delete(self, vmid, dev_name):
        dom = VMModel.get_vm(vmid, self.conn)
        xmlstr = dom.XMLDesc(0)
        root = objectify.fromstring(xmlstr)

        try:
            hostdev = root.devices.hostdev
        except AttributeError:
            raise NotFoundError('KCHVMHDEV0001E',
                                {'vmid': vmid, 'dev_name': dev_name})

        pci_devs = [(DeviceModel.deduce_dev_name(e, self.conn), e)
                    for e in hostdev if e.attrib['type'] == 'pci']

        for e in hostdev:
            if DeviceModel.deduce_dev_name(e, self.conn) == dev_name:
                xmlstr = etree.tostring(e)
                dom.detachDeviceFlags(
                    xmlstr, get_vm_config_flag(dom, mode='all'))
                if e.attrib['type'] == 'pci':
                    self._delete_affected_pci_devices(dom, dev_name, pci_devs)
                break
        else:
            raise NotFoundError('KCHVMHDEV0001E',
                                {'vmid': vmid, 'dev_name': dev_name})
Esempio n. 3
0
    def delete(self, vm_name, dev_name):
        try:
            bus_type = self.lookup(vm_name, dev_name)['bus']
            dom = VMModel.get_vm(vm_name, self.conn)
        except NotFoundError:
            raise

        if (bus_type not in HOTPLUG_TYPE and
                DOM_STATE_MAP[dom.info()[0]] != 'shutoff'):
            raise InvalidOperation('KCHVMSTOR0011E')

        try:
            disk = get_device_node(dom, dev_name)
            path = get_vm_disk_info(dom, dev_name)['path']
            if path is None or len(path) < 1:
                path = self.lookup(vm_name, dev_name)['path']
            # This has to be done before it's detached. If it wasn't
            #   in the obj store, its ref count would have been updated
            #   by get_disk_used_by()
            if path is not None:
                used_by = get_disk_used_by(self.objstore, self.conn, path)
            else:
                wok_log.error("Unable to decrement volume used_by on"
                              " delete because no path could be found.")
            dom.detachDeviceFlags(etree.tostring(disk),
                                  get_vm_config_flag(dom, 'all'))
        except Exception as e:
            raise OperationFailed("KCHVMSTOR0010E", {'error': e.message})

        if used_by is not None and vm_name in used_by:
            used_by.remove(vm_name)
            set_disk_used_by(self.objstore, path, used_by)
        else:
            wok_log.error("Unable to update %s:%s used_by on delete."
                          % (vm_name, dev_name))
Esempio n. 4
0
    def delete(self, vmid, dev_name):
        dom = VMModel.get_vm(vmid, self.conn)
        xmlstr = dom.XMLDesc(0)
        root = objectify.fromstring(xmlstr)

        try:
            hostdev = root.devices.hostdev
        except AttributeError:
            raise NotFoundError('KCHVMHDEV0001E', {
                'vmid': vmid,
                'dev_name': dev_name
            })

        pci_devs = [(DeviceModel.deduce_dev_name(e, self.conn), e)
                    for e in hostdev if e.attrib['type'] == 'pci']

        for e in hostdev:
            if DeviceModel.deduce_dev_name(e, self.conn) == dev_name:
                xmlstr = etree.tostring(e)
                dom.detachDeviceFlags(xmlstr,
                                      get_vm_config_flag(dom, mode='all'))
                if e.attrib['type'] == 'pci':
                    self._delete_affected_pci_devices(dom, dev_name, pci_devs)
                break
        else:
            raise NotFoundError('KCHVMHDEV0001E', {
                'vmid': vmid,
                'dev_name': dev_name
            })
Esempio n. 5
0
    def _attach_pci_device(self, vmid, dev_info):
        self._validate_pci_passthrough_env()

        dom = VMModel.get_vm(vmid, self.conn)
        # Due to libvirt limitation, we don't support live assigne device to
        # vfio driver.
        driver = ('vfio' if DOM_STATE_MAP[dom.info()[0]] == "shutoff" and
                  self.caps.kernel_vfio else 'kvm')

        # on powerkvm systems it must be vfio driver.
        distro, _, _ = platform.linux_distribution()
        if distro == 'IBM_PowerKVM':
            driver = 'vfio'

        # Attach all PCI devices in the same IOMMU group
        dev_model = DeviceModel(conn=self.conn)
        devs_model = DevicesModel(conn=self.conn)
        affected_names = devs_model.get_list(
            _passthrough_affected_by=dev_info['name'])
        passthrough_names = devs_model.get_list(
            _cap='pci', _passthrough='true')
        group_names = list(set(affected_names) & set(passthrough_names))
        pci_infos = [dev_model.lookup(dev_name) for dev_name in group_names]
        pci_infos.append(dev_info)

        # all devices in the group that is going to be attached to the vm
        # must be detached from the host first
        with RollbackContext() as rollback:
            for pci_info in pci_infos:
                try:
                    dev = self.conn.get().nodeDeviceLookupByName(
                        pci_info['name'])
                    dev.dettach()
                except Exception:
                    raise OperationFailed('KCHVMHDEV0005E',
                                          {'name': pci_info['name']})
                else:
                    rollback.prependDefer(dev.reAttach)

            rollback.commitAll()

        device_flags = get_vm_config_flag(dom, mode='all')

        with RollbackContext() as rollback:
            for pci_info in pci_infos:
                pci_info['detach_driver'] = driver
                xmlstr = self._get_pci_device_xml(pci_info)
                try:
                    dom.attachDeviceFlags(xmlstr, device_flags)
                except libvirt.libvirtError:
                    wok_log.error(
                        'Failed to attach host device %s to VM %s: \n%s',
                        pci_info['name'], vmid, xmlstr)
                    raise
                rollback.prependDefer(dom.detachDeviceFlags,
                                      xmlstr, device_flags)
            rollback.commitAll()

        return dev_info['name']
Esempio n. 6
0
    def _attach_pci_device(self, vmid, dev_info):
        self._validate_pci_passthrough_env()

        dom = VMModel.get_vm(vmid, self.conn)
        # Due to libvirt limitation, we don't support live assigne device to
        # vfio driver.
        driver = ('vfio' if DOM_STATE_MAP[dom.info()[0]] == "shutoff"
                  and self.caps.kernel_vfio else 'kvm')

        # on powerkvm systems it must be vfio driver.
        distro, _, _ = platform.linux_distribution()
        if distro == 'IBM_PowerKVM':
            driver = 'vfio'

        # Attach all PCI devices in the same IOMMU group
        dev_model = DeviceModel(conn=self.conn)
        devs_model = DevicesModel(conn=self.conn)
        affected_names = devs_model.get_list(
            _passthrough_affected_by=dev_info['name'])
        passthrough_names = devs_model.get_list(_cap='pci',
                                                _passthrough='true')
        group_names = list(set(affected_names) & set(passthrough_names))
        pci_infos = [dev_model.lookup(dev_name) for dev_name in group_names]
        pci_infos.append(dev_info)

        # all devices in the group that is going to be attached to the vm
        # must be detached from the host first
        with RollbackContext() as rollback:
            for pci_info in pci_infos:
                try:
                    dev = self.conn.get().nodeDeviceLookupByName(
                        pci_info['name'])
                    dev.dettach()
                except Exception:
                    raise OperationFailed('KCHVMHDEV0005E',
                                          {'name': pci_info['name']})
                else:
                    rollback.prependDefer(dev.reAttach)

            rollback.commitAll()

        device_flags = get_vm_config_flag(dom, mode='all')

        with RollbackContext() as rollback:
            for pci_info in pci_infos:
                pci_info['detach_driver'] = driver
                xmlstr = self._get_pci_device_xml(pci_info)
                try:
                    dom.attachDeviceFlags(xmlstr, device_flags)
                except libvirt.libvirtError:
                    wok_log.error(
                        'Failed to attach host device %s to VM %s: \n%s',
                        pci_info['name'], vmid, xmlstr)
                    raise
                rollback.prependDefer(dom.detachDeviceFlags, xmlstr,
                                      device_flags)
            rollback.commitAll()

        return dev_info['name']
Esempio n. 7
0
    def _delete_affected_pci_devices(self, dom, dev_name, pci_devs):
        dev_model = DeviceModel(conn=self.conn)
        try:
            dev_model.lookup(dev_name)
        except NotFoundError:
            return

        affected_names = set(
            DevicesModel(
                conn=self.conn).get_list(_passthrough_affected_by=dev_name))

        for pci_name, e in pci_devs:
            if pci_name in affected_names:
                xmlstr = etree.tostring(e)
                dom.detachDeviceFlags(
                    xmlstr, get_vm_config_flag(dom, mode='all'))
Esempio n. 8
0
    def _delete_affected_pci_devices(self, dom, dev_name, pci_devs):
        dev_model = DeviceModel(conn=self.conn)
        try:
            dev_model.lookup(dev_name)
        except NotFoundError:
            return

        affected_names = set(
            DevicesModel(conn=self.conn).get_list(
                _passthrough_affected_by=dev_name))

        for pci_name, e in pci_devs:
            if pci_name in affected_names:
                xmlstr = etree.tostring(e)
                dom.detachDeviceFlags(xmlstr,
                                      get_vm_config_flag(dom, mode='all'))
Esempio n. 9
0
    def update(self, vm_name, dev_name, params):
        old_disk_used_by = None
        new_disk_used_by = None

        dom = VMModel.get_vm(vm_name, self.conn)

        dev_info = self.lookup(vm_name, dev_name)
        if dev_info['type'] != 'cdrom':
            raise InvalidOperation("KCHVMSTOR0006E")

        params['path'] = params.get('path', '')
        old_disk_path = dev_info['path']
        new_disk_path = params['path']
        if new_disk_path != old_disk_path:
            # An empty path means a CD-ROM was empty or ejected:
            if old_disk_path is not '':
                old_disk_used_by = get_disk_used_by(self.objstore, self.conn,
                                                    old_disk_path)
            if new_disk_path is not '':
                new_disk_used_by = get_disk_used_by(self.objstore, self.conn,
                                                    new_disk_path)

        dev_info.update(params)
        dev, xml = get_disk_xml(dev_info)

        try:
            dom.updateDeviceFlags(xml, get_vm_config_flag(dom, 'all'))
        except Exception as e:
            raise OperationFailed("KCHVMSTOR0009E", {'error': e.message})

        try:
            if old_disk_used_by is not None and \
               vm_name in old_disk_used_by:
                old_disk_used_by.remove(vm_name)
                set_disk_used_by(self.objstore, old_disk_path,
                                 old_disk_used_by)
            if new_disk_used_by is not None:
                new_disk_used_by.append(vm_name)
                set_disk_used_by(self.objstore, new_disk_path,
                                 new_disk_used_by)
        except Exception as e:
            wok_log.error("Unable to update dev used_by on update due to"
                          " %s:" % e.message)
        return dev
Esempio n. 10
0
    def update(self, vm_name, dev_name, params):
        old_disk_used_by = None
        new_disk_used_by = None

        dom = VMModel.get_vm(vm_name, self.conn)

        dev_info = self.lookup(vm_name, dev_name)
        if dev_info['type'] != 'cdrom':
            raise InvalidOperation("KCHVMSTOR0006E")

        params['path'] = params.get('path', '')
        old_disk_path = dev_info['path']
        new_disk_path = params['path']
        if new_disk_path != old_disk_path:
            # An empty path means a CD-ROM was empty or ejected:
            if old_disk_path is not '':
                old_disk_used_by = get_disk_used_by(
                    self.objstore, self.conn, old_disk_path)
            if new_disk_path is not '':
                new_disk_used_by = get_disk_used_by(
                    self.objstore, self.conn, new_disk_path)

        dev_info.update(params)
        dev, xml = get_disk_xml(dev_info)

        try:
            dom.updateDeviceFlags(xml, get_vm_config_flag(dom, 'all'))
        except Exception as e:
            raise OperationFailed("KCHVMSTOR0009E", {'error': e.message})

        try:
            if old_disk_used_by is not None and \
               vm_name in old_disk_used_by:
                old_disk_used_by.remove(vm_name)
                set_disk_used_by(self.objstore, old_disk_path,
                                 old_disk_used_by)
            if new_disk_used_by is not None:
                new_disk_used_by.append(vm_name)
                set_disk_used_by(self.objstore, new_disk_path,
                                 new_disk_used_by)
        except Exception as e:
            wok_log.error("Unable to update dev used_by on update due to"
                          " %s:" % e.message)
        return dev
Esempio n. 11
0
    def create(self, vm_name, params):
        vol_model = None
        # Path will never be blank due to API.json verification.
        # There is no need to cover this case here.
        if not ('vol' in params) ^ ('path' in params):
            raise InvalidParameter("KCHVMSTOR0017E")

        dom = VMModel.get_vm(vm_name, self.conn)
        params['bus'] = _get_device_bus(params['type'], dom)
        params['format'] = 'raw'

        dev_list = [
            dev for dev, bus in get_vm_disks(dom).iteritems()
            if bus == params['bus']
        ]
        dev_list.sort()
        if len(dev_list) == 0:
            params['index'] = 0
        else:
            char = dev_list.pop()[2]
            params['index'] = string.ascii_lowercase.index(char) + 1

        if (params['bus'] not in HOTPLUG_TYPE
                and DOM_STATE_MAP[dom.info()[0]] != 'shutoff'):
            raise InvalidOperation('KCHVMSTOR0011E')

        if params.get('vol'):
            try:
                pool = params['pool']
                vol_model = StorageVolumeModel(conn=self.conn,
                                               objstore=self.objstore)
                vol_info = vol_model.lookup(pool, params['vol'])
            except KeyError:
                raise InvalidParameter("KCHVMSTOR0012E")
            except Exception as e:
                raise InvalidParameter("KCHVMSTOR0015E", {'error': e})
            if len(vol_info['used_by']) != 0:
                raise InvalidParameter("KCHVMSTOR0016E")

            valid_format = {
                "disk": ["raw", "bochs", "qcow", "qcow2", "qed", "vmdk"],
                "cdrom": "iso"
            }

            if vol_info['type'] == 'file':
                if (params['type'] == 'disk' and vol_info['format']
                        in valid_format[params['type']]):
                    params['format'] = vol_info['format']
                else:
                    raise InvalidParameter("KCHVMSTOR0018E", {
                        "format": vol_info['format'],
                        "type": params['type']
                    })

            if (params['format'] == 'raw' and not vol_info['isvalid']):
                message = 'This is not a valid RAW disk image.'
                raise OperationFailed('KCHVMSTOR0008E', {'error': message})

            params['path'] = vol_info['path']
            params['disk'] = vol_info['type']

        params.update(self._get_available_bus_address(params['bus'], vm_name))

        # Add device to VM
        dev, xml = get_disk_xml(params)
        try:
            dom = VMModel.get_vm(vm_name, self.conn)
            dom.attachDeviceFlags(xml, get_vm_config_flag(dom, 'all'))
        except Exception as e:
            raise OperationFailed("KCHVMSTOR0008E", {'error': e.message})

        # Don't put a try-block here. Let the exception be raised. If we
        #   allow disks used_by to be out of sync, data corruption could
        #   occour if a disk is added to two guests unknowingly.
        if params.get('vol'):
            used_by = vol_info['used_by']
            used_by.append(vm_name)
            set_disk_used_by(self.objstore, params['path'], used_by)

        return dev
Esempio n. 12
0
 def _attach_usb_device(self, vmid, dev_info):
     xmlstr = self._get_usb_device_xml(dev_info)
     dom = VMModel.get_vm(vmid, self.conn)
     dom.attachDeviceFlags(xmlstr, get_vm_config_flag(dom, mode='all'))
     return dev_info['name']
Esempio n. 13
0
    def create(self, vm_name, params):
        vol_model = None
        # Path will never be blank due to API.json verification.
        # There is no need to cover this case here.
        if not ('vol' in params) ^ ('path' in params):
            raise InvalidParameter("KCHVMSTOR0017E")

        dom = VMModel.get_vm(vm_name, self.conn)
        params['bus'] = _get_device_bus(params['type'], dom)
        params['format'] = 'raw'

        dev_list = [dev for dev, bus in get_vm_disks(dom).iteritems()
                    if bus == params['bus']]
        dev_list.sort()
        if len(dev_list) == 0:
            params['index'] = 0
        else:
            char = dev_list.pop()[2]
            params['index'] = string.ascii_lowercase.index(char) + 1

        if (params['bus'] not in HOTPLUG_TYPE and
           DOM_STATE_MAP[dom.info()[0]] != 'shutoff'):
            raise InvalidOperation('KCHVMSTOR0011E')

        if params.get('vol'):
            try:
                pool = params['pool']
                vol_model = StorageVolumeModel(conn=self.conn,
                                               objstore=self.objstore)
                vol_info = vol_model.lookup(pool, params['vol'])
            except KeyError:
                raise InvalidParameter("KCHVMSTOR0012E")
            except Exception as e:
                raise InvalidParameter("KCHVMSTOR0015E", {'error': e})
            if len(vol_info['used_by']) != 0:
                raise InvalidParameter("KCHVMSTOR0016E")

            valid_format = {
                "disk": ["raw", "bochs", "qcow", "qcow2", "qed", "vmdk"],
                "cdrom": "iso"}

            if vol_info['type'] == 'file':
                if (params['type'] == 'disk' and
                        vol_info['format'] in valid_format[params['type']]):
                    params['format'] = vol_info['format']
                else:
                    raise InvalidParameter("KCHVMSTOR0018E",
                                           {"format": vol_info['format'],
                                            "type": params['type']})

            if (params['format'] == 'raw' and not vol_info['isvalid']):
                message = 'This is not a valid RAW disk image.'
                raise OperationFailed('KCHVMSTOR0008E', {'error': message})

            params['path'] = vol_info['path']
            params['disk'] = vol_info['type']

        params.update(self._get_available_bus_address(params['bus'], vm_name))

        # Add device to VM
        dev, xml = get_disk_xml(params)
        try:
            dom = VMModel.get_vm(vm_name, self.conn)
            dom.attachDeviceFlags(xml, get_vm_config_flag(dom, 'all'))
        except Exception as e:
            raise OperationFailed("KCHVMSTOR0008E", {'error': e.message})

        # Don't put a try-block here. Let the exception be raised. If we
        #   allow disks used_by to be out of sync, data corruption could
        #   occour if a disk is added to two guests unknowingly.
        if params.get('vol'):
            used_by = vol_info['used_by']
            used_by.append(vm_name)
            set_disk_used_by(self.objstore, params['path'], used_by)

        return dev
Esempio n. 14
0
 def _attach_usb_device(self, vmid, dev_info):
     xmlstr = self._get_usb_device_xml(dev_info)
     dom = VMModel.get_vm(vmid, self.conn)
     dom.attachDeviceFlags(xmlstr, get_vm_config_flag(dom, mode='all'))
     return dev_info['name']