def test_get_config_list_corrupt_2(self):
class TestALH:
def get(self, resource):
s = "dev #0, Test, 2 configs:"
return s.encode('ascii')
alh = TestALH()
s = SpectrumSensor(alh)
self.assertRaises(CRCError, s.get_config_list)
def get_radio_info(self, platform_id):
if platform_id == "sensor":
sensor = SpectrumSensor(self.node)
config_list = sensor.get_config_list()
elif platform_id == "generator":
generator = SignalGenerator(self.node)
config_list = generator.get_config_list()
else:
config_list = str(platform_id) + ": Not supported! Try: sensor or generator"
return config_list
def test_sweep_1(self):
class MockALH(ALHProtocol):
def _post(self, resource, data, *args):
return b"\x00\x00\x01\x00\x02\x00D\xa4H;"
alh = MockALH()
ss = SpectrumSensor(alh)
sc = self._get_sc()
r = ss.sweep(sc)
self.assertEqual(r.data, [0., .01, .02])
def test_get_config_list_corrupt_1(self):
class TestALH:
def get(self, resource):
return "".encode('ascii')
alh = TestALH()
s = SpectrumSensor(alh)
cl = s.get_config_list()
self.assertEqual(cl.configs, [])
self.assertEqual(cl.devices, [])
def get_measurements(self, params):
if not self.sensor:
self.sensor = SpectrumSensor(self.node)
config_list = self.sensor.get_config_list()
self.sweep_config = config_list.get_sweep_config(params[0], params[1], params[2])
if self.sweep_config is None:
self.sensor = None
raise Exception("Node can not scan specified frequency range.")
sweep = self.sensor.sweep(self.sweep_config)
f = list(self.sweep_config.get_hz_list())
p = sweep.data
return {'frequency':f, 'power':p}
def test_sweep_2(self):
class MockALH(ALHProtocol):
def _post(self, resource, data, *args):
# negative CRC
return b"\x00\x00\x01\x00\x08\x00\xceL\xa7\xc1"
alh = MockALH()
ss = SpectrumSensor(alh)
sc = self._get_sc()
r = ss.sweep(sc)
self.assertEqual(r.data, [0., .01, .08])
def __init__(self, txnode, rxnode):
# We set up the SignalGenerator and SpectrumSensor objects here
# for later use. We also query both nodes for their
# corresponding lists of available hardware configurations.
#
# Since hardware will not change during the experiment, we only
# do the query once in object constructor. This makes repeated
# measurements faster.
self.generator = SignalGenerator(txnode)
self.generator_cl = self.generator.get_config_list()
self.sensor = SpectrumSensor(rxnode)
self.sensor_cl = self.sensor.get_config_list()
def test_get_config_list(self):
class TestALH:
def get(self, resource):
s = "dev #0, Test, 1 configs:\n" \
" cfg #0: Test:\n" \
" base: 10 Hz, spacing: 1 Hz, bw: 1 Hz, channels: 10, time: 1 ms"
return s.encode('ascii')
alh = TestALH()
s = SpectrumSensor(alh)
cl = s.get_config_list()
self.assertEqual(len(cl.devices), 1)
self.assertEqual(len(cl.configs), 1)
def test_retrieve(self):
class MockALH(ALHProtocol):
def _get(self, resource, *args):
if b"Info" in resource:
return b"status=COMPLETE,size=14"
else:
return b"\x00\x00\x00\x00\x00\x00\x01\x00\x02\x00\x91m\x00i"
alh = MockALH()
ss = SpectrumSensor(alh)
sc = self._get_sc()
p = SpectrumSensorProgram(sc, 0, 10, 1)
r = ss.retrieve(p)
self.assertEqual(len(r.sweeps), 1)
self.assertEqual(r.sweeps[0].data, [0., .01, .02])
self.assertEqual(r.sweeps[0].timestamp, 0)
def setup(self, options):
if not options.verbosity:
options.verbosity = "warning"
coor = get_coordinator(options)
coor.post("prog/firstcall", "1")
self.node = ALHProxy(coor, options.node)
self.node.post("prog/firstcall", "1")
self.spectrumsensor = SpectrumSensor(self.node)
self.config_list = self.spectrumsensor.get_config_list()
if not self.config_list.configs:
raise Exception("Device returned no configurations. "
"It is still scanning or not responding.")
self.config = self.config_list.get_config(self.device_id,
self.config_id)
def main():
# Turn on logging so that we can see ALH requests happening in the
# background.
logging.basicConfig(level=logging.INFO)
coor = alh.ALHWeb("https://crn.log-a-tec.eu/communicator", 10001)
# Node 19 is equipped with an UHF receiver (TDA18219 on SNE-ISMTV-UHF)
node = alh.ALHProxy(coor, 19)
# Node 17 is equipped with an 2.4 GHz receiver (CC2500 on SNE-ISMTV-24)
#node = alh.ALHProxy(coor, 17)
# Wrap an ALHProxy object with a SpectrumSensor object that provides an
# convenient interface to spectrum sensing functionality of the node
# exposed through ALH resources.
sensor = SpectrumSensor(node)
# Get a ConfigList object that contains a list of device configurations
# supported by the chosen sensor node.
config_list = sensor.get_config_list()
# ConfigList.get_sweep_config() method will automatically choose
# the best device and configuration that can cover the requested
# frequency range.
#
# It returns an instance of SweepConfig class that describes all
# the settings for a frequency sweep.
#
# First example defines a sweep starting at 550 MHz and ending at
# 574 MHz with 2 MHz steps (use with node 19)
#
# Second example define a sweep starting at 2420 MHz and ending at
# 2430 MHz with 400 kHz steps (use with node 17)
sweep_config = config_list.get_sweep_config(550e6, 574e6, 1e6)
#sweep_config = config_list.get_sweep_config(2420e6, 2430e6, 400e3)
if sweep_config is None:
raise Exception("Node can not scan specified frequency range.")
pyplot.ion()
while True:
# Perform the sweep
sweep = sensor.sweep(sweep_config)
# Get the list of frequencies covered by the sweep
f_hz = sweep_config.get_hz_list()
# Convert list from Hz to MHz for nicer plot
f_mhz = numpy.array(f_hz) / 1e6
pyplot.clf()
pyplot.grid()
pyplot.xlabel("frequency [MHz]")
pyplot.ylabel("power [dBm]")
# Plot data
pyplot.plot(f_mhz, sweep.data)
pyplot.axis([min(f_mhz), max(f_mhz), -110, -50])
pyplot.draw()
pyplot.pause(1)
def main():
coor_industrial_zone = alh.ALHWeb(get_communicator_url(), 10001)
time_start = time.time() + 30
# Set up transmissions
for node_id in [10, 8, 7]:
node = alh.ALHProxy(coor_industrial_zone, node_id)
node.post("prog/firstCall", "1")
su1 = SignalGenerator(alh.ALHProxy(coor_industrial_zone, 10))
su2 = SignalGenerator(alh.ALHProxy(coor_industrial_zone, 8))
mic = SignalGenerator(alh.ALHProxy(coor_industrial_zone, 7))
config_list = su1.get_config_list()
tx_config = config_list.get_tx_config(0, 0)
mic.program( SignalGeneratorProgram(
config_list.get_tx_config(f_hz=790e6, power_dbm=0),
time_start=time_start+30,
time_duration=40) )
mic.program( SignalGeneratorProgram(
config_list.get_tx_config(f_hz=807e6, power_dbm=0),
time_start=time_start+80,
time_duration=40) )
su1.program( SignalGeneratorProgram(
config_list.get_tx_config(f_hz=787e6, power_dbm=0),
time_start=time_start,
time_duration=35) )
su1.program( SignalGeneratorProgram(
config_list.get_tx_config(f_hz=780e6, power_dbm=0),
time_start=time_start+35,
time_duration=90) )
su2.program( SignalGeneratorProgram(
config_list.get_tx_config(f_hz=795e6, power_dbm=0),
time_start=time_start,
time_duration=35) )
su2.program( SignalGeneratorProgram(
config_list.get_tx_config(f_hz=800e6, power_dbm=0),
time_start=time_start+35,
time_duration=50) )
su2.program( SignalGeneratorProgram(
config_list.get_tx_config(f_hz=797e6, power_dbm=0),
time_start=time_start+85,
time_duration=35) )
# Set up spectrum sensing
sensor_node_ids = [ 19 ]
sensor_nodes = [ alh.ALHProxy(coor_industrial_zone, id) for id in sensor_node_ids ]
sensors = [ SpectrumSensor(sensor_node) for sensor_node in sensor_nodes ]
config_list = sensors[0].get_config_list()
sweep_config = config_list.get_sweep_config(
start_hz=770000000, stop_hz=820000000, step_hz=400000)
# -1 below is a work-around for an off-by-one error somewhere in the spectrum sensing
# resource handler
sweep_config.num_channels -= 1
program = SpectrumSensorProgram(sweep_config, time_start, time_duration=120, slot_id=5)
for sensor in sensors:
sensor.program(program)
# Wait for the experiment to finish
for sensor in sensors:
while not sensor.is_complete(program):
print "waiting..."
time.sleep(2)
if time.time() > (program.time_start + program.time_duration + 30):
raise Exception("Something went wrong")
print "experiment is finished. retrieving data."
result = sensor.retrieve(program)
try:
os.mkdir("data")
except OSError:
pass
result.write("data/node_%d.dat" % (sensor.alh.addr,))
def main():
coor_industrial_zone = alh.ALHWeb(get_communicator_url(), 10001)
time_start = time.time() + 15
# Set up transmissions
cognitive_terminal = SignalGenerator(alh.ALHProxy(coor_industrial_zone,
25))
config_list = cognitive_terminal.get_config_list()
device_config = config_list.get_config(0, 0)
cognitive_terminal.program(
SignalGeneratorProgram(TxConfig(device_config, 110, 0),
time_start=(time_start + 5),
time_duration=25))
cognitive_terminal.program(
SignalGeneratorProgram(TxConfig(device_config, 225, 0),
time_start=(time_start + 32),
time_duration=23))
legacy_terminal = SignalGenerator(alh.ALHProxy(coor_industrial_zone, 16))
legacy_terminal.program(
SignalGeneratorProgram(TxConfig(device_config, 114, 0),
time_start=(time_start + 25),
time_duration=30))
# Set up spectrum sensing
sensor_node_ids = [2, 17, 6]
sensor_nodes = [
alh.ALHProxy(coor_industrial_zone, id) for id in sensor_node_ids
]
sensors = [SpectrumSensor(sensor_node) for sensor_node in sensor_nodes]
config_list = sensors[0].get_config_list()
sweep_config = config_list.get_config(0, 0).get_full_sweep_config()
program = SpectrumSensorProgram(sweep_config,
time_start,
time_duration=60,
slot_id=5)
for sensor in sensors:
sensor.program(program)
# Wait for the experiment to finish
for sensor in sensors:
while not sensor.is_complete(program):
print "waiting..."
time.sleep(2)
if time.time() > (program.time_start + program.time_duration + 60):
raise Exception("Something went wrong")
print "experiment is finished. retrieving data."
result = sensor.retrieve(program)
try:
os.mkdir("data")
except OSError:
pass
result.write("data/node_%d.dat" % (sensor.alh.addr, ))
def main():
# Turn on logging so that we can see requests and responses in the
# terminal. This is useful to keep track of what is going on during the
# experiment.
logging.basicConfig(level=logging.INFO)
# We must first create an object representing the coordinator node.
# Each cluster in the LOG-a-TEC has its own coordinator and all
# communication with the nodes must go through it.
#
# The parameters used here correspond to the LOG-a-TEC City Center
# out-door cluster (see LOG-a-TEC documentation for other valid
# options).
#
# Note that you must have a valid user name and password saved in an
# "alhrc" file in order for this to work. See vesna-alh-tools README
# for instructions on how to do that.
#
# Also make sure you reserved the cluster in the calendar before
# running the experiment!
coor = alh.ALHWeb("https://crn.log-a-tec.eu/communicator", 10002)
# We will be using node 45 in this example. First we create a generic
# node object for it.
node = alh.ALHProxy(coor, 45)
# We will use our node as a spectrum sensor. Here, we wrap the generic
# node object with the SpectrumSensor class that provides a convenient
# interface to the spectrum sensing capabilities of the node's radio
# hardware.
sensor = SpectrumSensor(node)
# Request the list of spectrum sensing configurations that the node
# supports.
#
# Node 45 is equipped with a SNE-ISMTV-2400 radio board that contains a
# CC2500 reconfigurable transceiver. This tranceiver supports a number
# of configurations that cover the 2.4 GHz ISM band.
sensor_config_list = sensor.get_config_list()
# Let's print the list out in a nice format for future reference.
print
print "Spectrum sensing devices and configurations available"
print "====================================================="
print sensor_config_list
print
# For a demonstration, we'll choose to sense the whole ISM band between
# 2.4 GHz and 2.5 GHz with 400 kHz steps. We create a SweepConfig object
# that describes this frequency range.
sweep_config = sensor_config_list.get_sweep_config(2400e6, 2500e6, 400e3)
if sweep_config is None:
raise Exception("Node can not scan specified frequency range.")
# Take note of current time.
now = time.time()
# SpectrumSensorProgram object allows us to program a node to perform a
# spectrum sensing task in advance. We'll setup a task for sensing the
# frequency range we selected above, starting 5 seconds from now and
# lasting for 30 seconds.
#
# Each node has local slots for temporary storage of spectrum sensing
# results. Since we are only performing one scan of the spectrum, it
# doesn't matter which slot we use. Let's pick slot 1.
sensor_program = SpectrumSensorProgram(sweep_config, now + 5, 30, 1)
# Now we actually send the programming instructions over the testbed's
# management network to the node.
sensor.program(sensor_program)
# Wait until the programmed task has been completed.
while not sensor.is_complete(sensor_program):
print "patience..."
time.sleep(2)
# The task is complete. We must now retrieve spectrum sensing results
# back from the node to our computer. This might take a while since the
# management mesh network is slow.
result = sensor.retrieve(sensor_program)
# Finally, we write results into a CSV file for further analysis.
#
# Alternatively, we could do something else with the results directly
# from this program. The SpectrumSensorResult object provides some
# convenient methods for accessing the result of the scan.
result.write("logatec.csv")
def main():
# Turn on logging so that we can see requests and responses in the
# terminal.
logging.basicConfig(level=logging.INFO)
# We must first create an object representing the coordinator node.
coor_campus = alh.ALHWeb("https://crn.log-a-tec.eu/communicator", 9501)
# Our experiment will start 15 seconds into the future - this should
# give us plenty of time to set up everything.
time_start = time.time() + 15
# First we set up the two transmitting nodes:
#
# Node 53 in the LOG-a-TEC Campus Zone will be playing the role of
# the cognitive terminal.
cognitive_terminal = SignalGenerator(alh.ALHProxy(coor_campus, 53))
# All nodes we will be using are equipped with SNE-ISMTV-2400 radio
# boards with CC2500 transceivers. From the available list of
# signal generation configurations supported by this hardware, we
# choose the first one: It allows to transmit in 200 kHz wide channels.
config_list = cognitive_terminal.get_config_list()
device_config = config_list.get_config(0, 0)
# Here we program the "cognitive_terminal" node to transmit for 25
# seconds on channel 110 (2422.0 MHz) and then change to channel 225
# (2445.0 MHz). Transmission power is set to 0 dBm.
cognitive_terminal.program(
SignalGeneratorProgram(TxConfig(device_config, 110, 0),
time_start=(time_start + 5),
time_duration=25))
cognitive_terminal.program(
SignalGeneratorProgram(TxConfig(device_config, 225, 0),
time_start=(time_start + 32),
time_duration=23))
# Node 54 in the LOG-a-TEC Campus Zone will be playing the role of
# the legacy terminal.
legacy_terminal = SignalGenerator(alh.ALHProxy(coor_campus, 54))
# The legacy terminal, lacking the capability to change channels on
# demand, is programmed to just transmit for 30 seconds on channel 114
# (2422.8 MHz)
legacy_terminal.program(
SignalGeneratorProgram(TxConfig(device_config, 114, 0),
time_start=(time_start + 25),
time_duration=30))
# Now we setup some sensing nodes so that we can observe the
# transmissions from different points in the testbed.
# We will use nodes 51 and 58 for this purpose.
sensor_node_ids = [51, 58]
sensor_nodes = [alh.ALHProxy(coor_campus, id) for id in sensor_node_ids]
sensors = [SpectrumSensor(sensor_node) for sensor_node in sensor_nodes]
# For sensing, we will use the first sensing configuration (255
# channels starting at 2.4 GHz with 400 kHz bandwidth)
config_list = sensors[0].get_config_list()
sweep_config = config_list.get_config(0, 0).get_full_sweep_config()
# We instruct the nodes to perform spectrum sensing for 60 seconds.
program = SpectrumSensorProgram(sweep_config,
time_start,
time_duration=60,
slot_id=5)
for sensor in sensors:
sensor.program(program)
# All nodes have been programmed at this point - wait for the experiment to finish.
for sensor in sensors:
while not sensor.is_complete(program):
print "waiting..."
time.sleep(2)
if time.time() > (program.time_start + program.time_duration + 60):
raise Exception("Something went wrong")
print "experiment is finished. retrieving data."
result = sensor.retrieve(program)
# We will save the sensing results in a "data/" subdirectory.
# Create it, if it doesn't already exist.
try:
os.mkdir("data")
except OSError:
pass
# For each sensing node, we write the results into a CSV file.
# The CSV file can be easily imported and plotted into tools
# like MatLab. For example, to plot the recorded spectrogram
# using GNU Plot, use the following commands:
#
# gnuplot> set pm3d map
# gnuplot> set xlabel "frequency [MHz]"
# gnuplot> set ylabel "time [s]"
# gnuplot> set cblabel "power [dBm]"
# gnuplot> unset key
# gnuplot> splot "node17.csv" using ($2/1e6):1:3
result.write("data/node_%d.csv" % (sensor.alh.addr, ))
def main():
# Turn on logging so that we can see ALH requests happening in the
# background.
logging.basicConfig(level=logging.INFO)
coor = alh.ALHWeb("https://crn.log-a-tec.eu/communicator", 10001)
# Nodes 16 and 17 are equipped with an 2.4 GHz tranceiver (CC2500 on
# SNE-ISMTV-24) that is capable of transmitting and receiving on the
# 2.4 GHz ISM band.
node16 = alh.ALHProxy(coor, 16)
node17 = alh.ALHProxy(coor, 17)
# We will use node 16 as a signal generator. We wrap its ALHProxy
# object with a SignalGenerator object for convenience.
generator = SignalGenerator(node16)
# Set up a transmission configuration for 2.425 GHz and 0 dBm
generator_config_list = generator.get_config_list()
tx_config = generator_config_list.get_tx_config(2425e6, 0)
if tx_config is None:
raise Exception("Node can not scan specified frequency range.")
# We will use node 17 as a spectrum sensor. Again, we wrap it with a
# SpectrumSensor object for convenience.
sensor = SpectrumSensor(node17)
# We set up a frequency sweep configuration covering 2.40 GHz to 2.45
# GHz band with 400 kHz steps.
sensor_config_list = sensor.get_config_list()
sweep_config = sensor_config_list.get_sweep_config(2400e6, 2450e6, 400e3)
if sweep_config is None:
raise Exception("Node can not scan specified frequency range.")
# Take note of current time.
now = time.time()
# SignalGeneratorProgram and SpectrumSensorProgram objects allow us to
# program signal generation and spectrum sensing tasks in advance.
#
# In this case, we setup a signal generation task using the
# configuration we prepared above starting 10 seconds from now and
# lasting for 20 seconds.
#
# Similarly for spectrum sensing, we setup a task using frequency sweep
# we prepared above starting 5 seconds from now and lasting for 30
# seconds. Results of the measurement will be stored in slot 4.
generator_program = SignalGeneratorProgram(tx_config, now + 10, 20)
sensor_program = SpectrumSensorProgram(sweep_config, now + 5, 30, 4)
# Now actually send instructions over the management network to nodes
# in the testbed.
generator.program(generator_program)
sensor.program(sensor_program)
# Query the spectrum sensing node and wait until the task has been
# completed.
while not sensor.is_complete(sensor_program):
print "waiting..."
time.sleep(2)
# Retrieve spectrum sensing results. This might take a while since the
# management mesh network is slow.
result = sensor.retrieve(sensor_program)
# Write results into a CSV file.
result.write("06-programmed-tasks.dat")
