def run(test, params, env):
vd_formats = []
disk_devices = []
driver_names = []
driver_types = []
device_targets = []
target_buses = []
wwnns = []
wwpns = []
vm_names = params.get("vms", "avocado-vt-vm1 avocado-vt-vm2").split()
fc_host_dir = params.get("fc_host_dir", "/sys/class/fc_host")
vm0_disk_type = params.get("vm0_disk_type", "block")
vm1_disk_type = params.get("vm1_disk_type", "block")
vm0_vd_format = params.get("vm0_vd_format", "by_path")
vm1_vd_format = params.get("vm1_vd_foramt", "by_path")
vm0_disk_device = vm1_disk_device = params.get("disk_device", "disk")
vm0_driver_name = vm1_driver_name = params.get("driver_name", "qemu")
vm0_driver_type = vm1_driver_type = params.get("driver_type", "qcow2")
vm0_device_target = vm1_device_target = params.get("device_target", "vda")
vm0_target_bus = vm1_target_bus = params.get("target_bus", "virtio")
vm0_wwnn = params.get("vm0_wwnn", "ENTER.WWNN.FOR.VM0")
vm0_wwpn = params.get("vm0_wwpn", "ENTER.WWPN.FOR.VM0")
vm1_wwnn = params.get("vm1_wwnn", "ENTER.WWNN.FOR.VM1")
vm1_wwpn = params.get("vm1_wwpn", "ENTER.WWPN.FOR.VM1")
disk_types = [vm0_disk_type, vm1_disk_type]
vd_formats = [vm0_vd_format, vm1_vd_format]
disk_devices = [vm0_disk_device, vm1_disk_device]
driver_names = [vm0_driver_name, vm1_driver_name]
driver_types = [vm0_driver_type, vm1_driver_type]
device_targets = [vm0_device_target, vm1_device_target]
target_buses = [vm0_target_bus, vm1_target_bus]
wwnns = [vm0_wwnn, vm1_wwnn]
wwpns = [vm0_wwpn, vm1_wwpn]
old_mpath_conf = ""
mpath_conf_path = "/etc/multipath.conf"
original_mpath_conf_exist = os.path.exists(mpath_conf_path)
new_vhbas = []
path_to_blks = []
vmxml_backups = []
vms = []
try:
online_hbas = utils_npiv.find_hbas("hba")
if not online_hbas:
test.cancel("There is no online hba cards.")
old_mpath_conf = utils_npiv.prepare_multipath_conf(conf_path=mpath_conf_path,
replace_existing=True)
first_online_hba = online_hbas[0]
if len(vm_names) != 2:
test.cancel("This test needs exactly 2 vms.")
for vm_index in range(len(vm_names)):
logging.debug("prepare vm %s", vm_names[vm_index])
vm = env.get_vm(vm_names[vm_index])
vms.append(vm)
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_names[vm_index])
vmxml_backup = vmxml.copy()
vmxml_backups.append(vmxml_backup)
old_vhbas = utils_npiv.find_hbas("vhba")
old_mpath_devs = utils_npiv.find_mpath_devs()
new_vhba = utils_npiv.nodedev_create_from_xml(
{"nodedev_parent": first_online_hba,
"scsi_wwnn": wwnns[vm_index],
"scsi_wwpn": wwpns[vm_index]})
utils_misc.wait_for(
lambda: utils_npiv.is_vhbas_added(old_vhbas),
timeout=_TIMEOUT*2)
if not new_vhba:
test.fail("vHBA not sucessfully generated.")
new_vhbas.append(new_vhba)
if vd_formats[vm_index] == "mpath":
utils_misc.wait_for(
lambda: utils_npiv.is_mpath_devs_added(old_mpath_devs),
timeout=_TIMEOUT*5)
if not utils_npiv.is_mpath_devs_added(old_mpath_devs):
test.fail("mpath dev not generated.")
cur_mpath_devs = utils_npiv.find_mpath_devs()
new_mpath_devs = list(set(cur_mpath_devs).difference(
set(old_mpath_devs)))
logging.debug("The newly added mpath dev is: %s",
new_mpath_devs)
path_to_blk = os.path.join(_MPATH_DIR, new_mpath_devs[0])
elif vd_formats[vm_index] == "by_path":
new_vhba_scsibus = re.sub("\D", "", new_vhba)
utils_misc.wait_for(lambda: get_blks_by_scsi(test, new_vhba_scsibus),
timeout=_TIMEOUT)
new_blks = get_blks_by_scsi(test, new_vhba_scsibus)
if not new_blks:
test.fail("blk dev not found with scsi_%s" % new_vhba_scsibus)
first_blk_dev = new_blks[0]
utils_misc.wait_for(
lambda: get_symbols_by_blk(test, first_blk_dev),
timeout=_TIMEOUT)
lun_sl = get_symbols_by_blk(test, first_blk_dev)
if not lun_sl:
test.fail("lun symbolic links not found in "
"/dev/disk/by-path/ for %s" %
first_blk_dev)
lun_dev = lun_sl[0]
path_to_blk = os.path.join(_BYPATH_DIR, lun_dev)
path_to_blks.append(path_to_blk)
img_src = vm.get_first_disk_devices()['source']
img_info = utils_misc.get_image_info(img_src)
src_fmt = img_info["format"]
dest_fmt = "qcow2"
convert_img_to_dev(test, src_fmt, dest_fmt, img_src, path_to_blk)
disk_obj = prepare_disk_obj(disk_types[vm_index], disk_devices[vm_index],
driver_names[vm_index], driver_types[vm_index],
path_to_blk, device_targets[vm_index],
target_buses[vm_index])
replace_vm_first_vd(vm_names[vm_index], disk_obj)
if vm.is_dead():
logging.debug("Start vm %s with updated vda", vm_names[vm_index])
vm.start()
# concurrently create file in vm with threads
create_file_in_vm_threads = []
for vm in vms:
cli_t = threading.Thread(target=create_file_in_vm,
args=(vm, _VM_FILE_PATH, vm.name, _REPEAT,)
)
logging.debug("Start creating file in vm: %s", vm.name)
create_file_in_vm_threads.append(cli_t)
cli_t.start()
for thrd in create_file_in_vm_threads:
thrd.join()
# reboot vm and check if previously create file still exist with
# correct content
for vm in vms:
session = vm.wait_for_login()
session.cmd_status_output("sync")
if vm.is_alive:
vm.destroy(gracefully=True)
else:
test.fail("%s is not running" % vm.name)
vm.start()
session = vm.wait_for_login()
if check_file_in_vm(session, _VM_FILE_PATH, vm.name, _REPEAT):
logging.debug("file exists after reboot with correct content")
else:
test.fail("Failed to check the test file in vm")
session.close()
except Exception as detail:
test.fail("Test failed with exception: %s" % detail)
finally:
logging.debug("Start to clean up env...")
for vmxml_backup in vmxml_backups:
vmxml_backup.sync()
for new_vhba in new_vhbas:
virsh.nodedev_destroy(new_vhba)
process.system('service multipathd restart', verbose=True)
if old_mpath_conf:
utils_npiv.prepare_multipath_conf(conf_path=mpath_conf_path,
conf_content=old_mpath_conf,
replace_existing=True)
if not original_mpath_conf_exist and os.path.exists(mpath_conf_path):
os.remove(mpath_conf_path)
def run(test, params, env):
"""
Test command: virsh pool-define; pool-define-as; pool-start;
vol-list pool; attach-device LUN to guest; mount the device;
dd to the mounted device; unmount; pool-destroy; pool-undefine;
Pre-requiste:
Host needs to have a wwpn and wwnn of a vHBA which is zoned and mapped to
SAN controller.
"""
pool_xml_f = params.get("pool_create_xml_file", "/PATH/TO/POOL.XML")
pool_name = params.get("pool_create_name", "virt_test_pool_tmp")
pre_def_pool = params.get("pre_def_pool", "no")
define_pool = params.get("define_pool", "no")
define_pool_as = params.get("define_pool_as", "no")
pool_create_as = params.get("pool_create_as", "no")
need_pool_build = params.get("need_pool_build", "no")
need_vol_create = params.get("need_vol_create", "no")
pool_type = params.get("pool_type", "dir")
source_format = params.get("pool_src_format", "")
source_name = params.get("pool_source_name", "")
source_path = params.get("pool_source_path", "/")
pool_target = params.get("pool_target", "pool_target")
pool_adapter_type = params.get("pool_adapter_type", "")
pool_adapter_parent = params.get("pool_adapter_parent", "")
target_device = params.get("disk_target_dev", "sdc")
pool_wwnn = params.get("pool_wwnn", "POOL_WWNN_EXAMPLE")
pool_wwpn = params.get("pool_wwpn", "POOL_WWPN_EXAMPLE")
vhba_wwnn = params.get("vhba_wwnn", "VHBA_WWNN_EXAMPLE")
vhba_wwpn = params.get("vhba_wwpn", "VHBA_WWPN_EXAMPLE")
volume_name = params.get("volume_name", "imagefrommapper.qcow2")
volume_capacity = params.get("volume_capacity", '1G')
allocation = params.get("allocation", '1G')
vol_format = params.get("volume_format", 'raw')
attach_method = params.get("attach_method", "hot")
test_unit = None
mount_disk = None
pool_kwargs = {}
pool_extra_args = ""
emulated_image = "emulated-image"
disk_xml = ""
new_vhbas = []
source_dev = ""
mpath_vol_path = ""
old_mpath_conf = ""
mpath_conf_path = "/etc/multipath.conf"
original_mpath_conf_exist = os.path.exists(mpath_conf_path)
if pool_type == "scsi":
if ('EXAMPLE' in pool_wwnn) or ('EXAMPLE' in pool_wwpn):
raise exceptions.TestSkipError(
"No wwpn and wwnn provided for npiv scsi pool.")
if pool_type == "logical":
if ('EXAMPLE' in vhba_wwnn) or ('EXAMPLE' in vhba_wwpn):
raise exceptions.TestSkipError(
"No wwpn and wwnn provided for vhba.")
online_hbas_list = utils_npiv.find_hbas("hba")
logging.debug("The online hbas are: %s", online_hbas_list)
old_mpath_conf = utils_npiv.prepare_multipath_conf(conf_path=mpath_conf_path,
replace_existing=True)
if not online_hbas_list:
raise exceptions.TestSkipError(
"Host doesn't have online hba cards")
old_vhbas = utils_npiv.find_hbas("vhba")
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
vmxml_backup = vmxml.copy()
if not vm.is_alive():
vm.start()
libvirt_vm = lib_vm.VM(vm_name, vm.params, vm.root_dir,
vm.address_cache)
pool_ins = libvirt_storage.StoragePool()
if pool_ins.pool_exists(pool_name):
raise exceptions.TestFail("Pool %s already exist" % pool_name)
if pool_type == "scsi":
if define_pool == "yes":
if pool_adapter_parent == "":
pool_adapter_parent = online_hbas_list[0]
pool_kwargs = {'source_path': source_path,
'source_name': source_name,
'source_format': source_format,
'pool_adapter_type': pool_adapter_type,
'pool_adapter_parent': pool_adapter_parent,
'pool_wwnn': pool_wwnn,
'pool_wwpn': pool_wwpn}
elif pool_type == "logical":
if (not vhba_wwnn) or (not vhba_wwpn):
raise exceptions.TestFail("No wwnn/wwpn provided to create vHBA.")
old_mpath_devs = utils_npiv.find_mpath_devs()
new_vhba = utils_npiv.nodedev_create_from_xml({
"nodedev_parent": online_hbas_list[0],
"scsi_wwnn": vhba_wwnn,
"scsi_wwpn": vhba_wwpn})
utils_misc.wait_for(
lambda: utils_npiv.is_vhbas_added(old_vhbas), timeout=_DELAY_TIME*2)
if not new_vhba:
raise exceptions.TestFail("vHBA not sucessfully generated.")
new_vhbas.append(new_vhba)
utils_misc.wait_for(
lambda: utils_npiv.is_mpath_devs_added(old_mpath_devs),
timeout=_DELAY_TIME*5)
if not utils_npiv.is_mpath_devs_added(old_mpath_devs):
raise exceptions.TestFail("mpath dev not generated.")
cur_mpath_devs = utils_npiv.find_mpath_devs()
new_mpath_devs = list(set(cur_mpath_devs).difference(
set(old_mpath_devs)))
logging.debug("The newly added mpath dev is: %s", new_mpath_devs)
source_dev = "/dev/mapper/" + new_mpath_devs[0]
logging.debug("We are going to use \"%s\" as our source device"
" to create a logical pool", source_dev)
try:
cmd = "parted %s mklabel msdos -s" % source_dev
cmd_result = process.run(cmd, shell=True)
except Exception as e:
raise exceptions.TestError("Error occurred when parted mklable")
if define_pool_as == "yes":
pool_extra_args = ""
if source_dev:
pool_extra_args = ' --source-dev %s' % source_dev
elif pool_type == "mpath":
if (not vhba_wwnn) or (not vhba_wwpn):
raise exceptions.TestFail("No wwnn/wwpn provided to create vHBA.")
old_mpath_devs = utils_npiv.find_mpath_devs()
new_vhba = utils_npiv.nodedev_create_from_xml({
"nodedev_parent": online_hbas_list[0],
"scsi_wwnn": vhba_wwnn,
"scsi_wwpn": vhba_wwpn})
utils_misc.wait_for(
lambda: utils_npiv.is_vhbas_added(old_vhbas), timeout=_DELAY_TIME*2)
if not new_vhba:
raise exceptions.TestFail("vHBA not sucessfully generated.")
new_vhbas.append(new_vhba)
utils_misc.wait_for(
lambda: utils_npiv.is_mpath_devs_added(old_mpath_devs),
timeout=_DELAY_TIME*2)
if not utils_npiv.is_mpath_devs_added(old_mpath_devs):
raise exceptions.TestFail("mpath dev not generated.")
cur_mpath_devs = utils_npiv.find_mpath_devs()
new_mpath_devs = list(set(cur_mpath_devs).difference(
set(old_mpath_devs)))
logging.debug("The newly added mpath dev is: %s", new_mpath_devs)
mpath_vol_path = "/dev/mapper/" + new_mpath_devs[0]
try:
cmd = "parted %s mklabel msdos -s" % mpath_vol_path
cmd_result = process.run(cmd, shell=True)
except Exception as e:
raise exceptions.TestError("Error occurred when parted mklable")
if pre_def_pool == "yes":
try:
pvt = utlv.PoolVolumeTest(test, params)
pvt.pre_pool(pool_name, pool_type,
pool_target, emulated_image,
**pool_kwargs)
utils_misc.wait_for(
lambda: utils_npiv.is_vhbas_added(old_vhbas),
_DELAY_TIME*2)
virsh.pool_dumpxml(pool_name, to_file=pool_xml_f)
virsh.pool_destroy(pool_name)
except Exception as e:
pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image, **pool_kwargs)
raise exceptions.TestError(
"Error occurred when prepare pool xml:\n %s" % e)
if os.path.exists(pool_xml_f):
with open(pool_xml_f, 'r') as f:
logging.debug("Create pool from file: %s", f.read())
try:
# define/create/start the pool
if (pre_def_pool == "yes") and (define_pool == "yes"):
pool_define_status = virsh.pool_define(pool_xml_f,
ignore_status=True,
debug=True)
utlv.check_exit_status(pool_define_status)
if define_pool_as == "yes":
pool_define_as_status = virsh.pool_define_as(
pool_name, pool_type,
pool_target, pool_extra_args,
ignore_status=True, debug=True
)
utlv.check_exit_status(pool_define_as_status)
if pool_create_as == "yes":
if pool_type != "scsi":
raise exceptions.TestSkipError("pool-create-as only needs to "
"be covered by scsi pool for "
"NPIV test.")
cmd = "virsh pool-create-as %s %s \
--adapter-wwnn %s --adapter-wwpn %s \
--adapter-parent %s --target %s"\
% (pool_name, pool_type, pool_wwnn, pool_wwpn,
online_hbas_list[0], pool_target)
cmd_status = process.system(cmd, verbose=True)
if cmd_status:
raise exceptions.TestFail("pool-create-as scsi pool failed.")
if need_pool_build == "yes":
pool_build_status = virsh.pool_build(pool_name, "--overwrite")
utlv.check_exit_status(pool_build_status)
pool_ins = libvirt_storage.StoragePool()
if not pool_ins.pool_exists(pool_name):
raise exceptions.TestFail("define or create pool failed.")
else:
if not pool_ins.is_pool_active(pool_name):
pool_start_status = virsh.pool_start(pool_name)
utlv.check_exit_status(pool_start_status)
utlv.check_actived_pool(pool_name)
pool_detail = libvirt_xml.PoolXML.get_pool_details(pool_name)
logging.debug("Pool detail: %s", pool_detail)
# create vol if required
if need_vol_create == "yes":
vol_create_as_status = virsh.vol_create_as(
volume_name, pool_name,
volume_capacity, allocation,
vol_format, "", debug=True
)
utlv.check_exit_status(vol_create_as_status)
virsh.pool_refresh(pool_name)
vol_list = utlv.get_vol_list(pool_name, vol_check=True,
timeout=_DELAY_TIME*3)
logging.debug('Volume list is: %s' % vol_list)
# use test_unit to save the first vol in pool
if pool_type == "mpath":
cmd = "virsh vol-list %s | grep \"%s\" |\
awk '{FS=\" \"} {print $1}'" % (pool_name, mpath_vol_path)
cmd_result = process.run(cmd, shell=True)
status = cmd_result.exit_status
output = cmd_result.stdout_text.strip()
if cmd_result.exit_status:
raise exceptions.TestFail("vol-list pool %s failed", pool_name)
if not output:
raise exceptions.TestFail("Newly added mpath dev not in pool.")
test_unit = output
logging.info(
"Using %s to attach to a guest", test_unit)
else:
test_unit = list(vol_list.keys())[0]
logging.info(
"Using the first volume %s to attach to a guest", test_unit)
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
session = vm.wait_for_login()
output = session.cmd_status_output('lsblk')
logging.debug("%s", output[1])
old_count = vmxml.get_disk_count(vm_name)
bf_disks = libvirt_vm.get_disks()
# prepare disk xml which will be hot/cold attached to vm
disk_params = {'type_name': 'volume', 'target_dev': target_device,
'target_bus': 'virtio', 'source_pool': pool_name,
'source_volume': test_unit, 'driver_type': vol_format}
disk_xml = os.path.join(data_dir.get_tmp_dir(), 'disk_xml.xml')
lun_disk_xml = utlv.create_disk_xml(disk_params)
copyfile(lun_disk_xml, disk_xml)
disk_xml_str = open(lun_disk_xml).read()
logging.debug("The disk xml is: %s", disk_xml_str)
# hot attach disk xml to vm
if attach_method == "hot":
copyfile(lun_disk_xml, disk_xml)
dev_attach_status = virsh.attach_device(vm_name, disk_xml,
debug=True)
# Pool/vol virtual disk is not supported by mpath pool yet.
if dev_attach_status.exit_status and pool_type == "mpath":
raise exceptions.TestSkipError("mpath pool vol is not "
"supported in virtual disk yet,"
"the error message is: %s",
dev_attach_status.stderr)
session.close()
utlv.check_exit_status(dev_attach_status)
# cold attach disk xml to vm
elif attach_method == "cold":
if vm.is_alive():
vm.destroy(gracefully=False)
new_disk = disk.Disk()
new_disk.xml = disk_xml_str
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
vmxml.devices = vmxml.devices.append(new_disk)
vmxml.sync()
logging.debug(vmxml)
try:
vm.start()
except virt_vm.VMStartError as e:
logging.debug(e)
if pool_type == "mpath":
raise exceptions.TestSkipError("'mpath' pools for backing "
"'volume' disks isn't "
"supported for now")
else:
raise exceptions.TestFail("Failed to start vm")
session = vm.wait_for_login()
else:
pass
# checking attached disk in vm
logging.info("Checking disk availability in domain")
if not vmxml.get_disk_count(vm_name):
raise exceptions.TestFail("No disk in domain %s." % vm_name)
new_count = vmxml.get_disk_count(vm_name)
if new_count <= old_count:
raise exceptions.TestFail(
"Failed to attach disk %s" % lun_disk_xml)
logging.debug("Disks before attach: %s", bf_disks)
af_disks = libvirt_vm.get_disks()
logging.debug("Disks after attach: %s", af_disks)
mount_disk = "".join(list(set(bf_disks) ^ set(af_disks)))
if not mount_disk:
raise exceptions.TestFail("Can not get attached device in vm.")
logging.debug("Attached device in vm:%s", mount_disk)
logging.debug("Creating file system for %s", mount_disk)
output = session.cmd_status_output(
'echo yes | mkfs.ext4 %s' % mount_disk)
logging.debug("%s", output[1])
if mount_disk:
mount_success = mount_and_dd(session, mount_disk)
if not mount_success:
raise exceptions.TestFail("Mount failed")
else:
raise exceptions.TestFail("Partition not available for disk")
logging.debug("Unmounting disk")
session.cmd_status_output('umount %s' % mount_disk)
output = session.cmd_status_output('mount')
logging.debug("%s", output[1])
mount_success = mount_and_dd(session, mount_disk)
if not mount_success:
raise exceptions.TestFail("Mount failed")
logging.debug("Unmounting disk")
session.cmd_status_output('umount %s' % mount_disk)
session.close()
# detach disk from vm
dev_detach_status = virsh.detach_device(vm_name, disk_xml,
debug=True)
utlv.check_exit_status(dev_detach_status)
finally:
vm.destroy(gracefully=False)
vmxml_backup.sync()
logging.debug('Destroying pool %s', pool_name)
virsh.pool_destroy(pool_name)
logging.debug('Undefining pool %s', pool_name)
virsh.pool_undefine(pool_name)
if os.path.exists(pool_xml_f):
os.remove(pool_xml_f)
if os.path.exists(disk_xml):
data_dir.clean_tmp_files()
logging.debug("Cleanup disk xml")
if pre_def_pool == "yes":
# Do not apply cleanup_pool for logical pool, logical pool will
# be cleaned below
pvt.cleanup_pool(pool_name, pool_type, pool_target,
emulated_image, **pool_kwargs)
if (test_unit and
(need_vol_create == "yes" and (pre_def_pool == "no")) and
(pool_type == "logical")):
process.system('lvremove -f %s/%s' % (pool_name, test_unit),
verbose=True)
process.system('vgremove -f %s' % pool_name, verbose=True)
process.system('pvremove -f %s' % source_dev, verbose=True)
if new_vhbas:
utils_npiv.vhbas_cleanup(new_vhbas)
# Restart multipathd, this is to avoid bz1399075
if source_dev:
utils_misc.wait_for(lambda: utils_npiv.restart_multipathd(source_dev),
_DELAY_TIME*5, 0.0, 5.0)
elif mpath_vol_path:
utils_misc.wait_for(lambda: utils_npiv.restart_multipathd(mpath_vol_path),
_DELAY_TIME*5, 0.0, 5.0)
else:
utils_npiv.restart_multipathd()
if old_mpath_conf:
utils_npiv.prepare_multipath_conf(conf_path=mpath_conf_path,
conf_content=old_mpath_conf,
replace_existing=True)
if not original_mpath_conf_exist and os.path.exists(mpath_conf_path):
os.remove(mpath_conf_path)
def run(test, params, env):
"""
1. prepare a fc lun with one of following methods
- create a scsi pool&vol
- create a vhba
2. prepare the virtual disk xml, as one of following
- source = /dev/disk/by-path
- source = /dev/mapper/mpathX
- source = pool&vol format
3. start a vm with above disk as vdb
4. create disk-only snapshot of vdb
5. check the snapshot-list and snapshot file's existence
6. mount vdb and touch file to it
7. revert the snapshot and check file's existence
8. delete snapshot
9. cleanup env.
"""
vm_name = params.get("main_vm", "avocado-vt-vm1")
wwpn = params.get("wwpn", "WWPN_EXAMPLE")
wwnn = params.get("wwnn", "WWNN_EXAMPLE")
disk_device = params.get("disk_device", "disk")
disk_type = params.get("disk_type", "file")
disk_size = params.get("disk_size", "100M")
device_target = params.get("device_target", "vdb")
driver_name = params.get("driver_name", "qemu")
driver_type = params.get("driver_type", "raw")
target_bus = params.get("target_bus", "virtio")
vd_format = params.get("vd_format", "")
snapshot_dir = params.get("snapshot_dir", "/tmp")
snapshot_name = params.get("snapshot_name", "s1")
pool_name = params.get("pool_name", "")
pool_target = params.get("pool_target", "/dev")
snapshot_disk_only = "yes" == params.get("snapshot_disk_only", "no")
new_vhbas = []
current_vhbas = []
new_vhba = []
path_to_blk = ""
lun_sl = []
new_disk = ""
pool_ins = None
old_mpath_conf = ""
mpath_conf_path = "/etc/multipath.conf"
original_mpath_conf_exist = os.path.exists(mpath_conf_path)
vm = env.get_vm(vm_name)
online_hbas = utils_npiv.find_hbas("hba")
if not online_hbas:
raise exceptions.TestSkipError("There is no online hba cards.")
old_mpath_conf = utils_npiv.prepare_multipath_conf(
conf_path=mpath_conf_path, replace_existing=True)
first_online_hba = online_hbas[0]
old_vhbas = utils_npiv.find_hbas("vhba")
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
virt_vm = libvirt_vm.VM(vm_name, vm.params, vm.root_dir, vm.address_cache)
old_disks = virt_vm.get_disks()
if vm.is_alive():
vm.destroy(gracefully=False)
if pool_name:
pool_ins = libvirt_storage.StoragePool()
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
vmxml_backup = vmxml.copy()
try:
# prepare a fc lun
if vd_format in ['scsi_vol']:
if pool_ins.pool_exists(pool_name):
raise exceptions.TestFail("Pool %s already exist" % pool_name)
prepare_scsi_pool(pool_name, wwnn, wwpn, first_online_hba,
pool_target)
utils_misc.wait_for(lambda: utils_npiv.is_vhbas_added(old_vhbas),
timeout=_TIMEOUT)
if not utils_npiv.is_vhbas_added(old_vhbas):
raise exceptions.TestFail("vHBA not successfully created")
current_vhbas = utils_npiv.find_hbas("vhba")
new_vhba = list(set(current_vhbas).difference(set(old_vhbas)))[0]
new_vhbas.append(new_vhba)
new_vhba_scsibus = re.sub("\D", "", new_vhba)
utils_misc.wait_for(lambda: get_blks_by_scsi(new_vhba_scsibus),
timeout=_TIMEOUT)
new_blks = get_blks_by_scsi(new_vhba_scsibus)
if not new_blks:
raise exceptions.TestFail(
"block device not found with scsi_%s", new_vhba_scsibus)
vol_list = utlv.get_vol_list(pool_name,
vol_check=True,
timeout=_TIMEOUT * 3)
path_to_blk = list(vol_list.values())[0]
elif vd_format in ['mpath', 'by_path']:
old_mpath_devs = utils_npiv.find_mpath_devs()
new_vhba = utils_npiv.nodedev_create_from_xml({
"nodedev_parent": first_online_hba,
"scsi_wwnn": wwnn,
"scsi_wwpn": wwpn
})
utils_misc.wait_for(lambda: utils_npiv.is_vhbas_added(old_vhbas),
timeout=_TIMEOUT * 2)
if not new_vhba:
raise exceptions.TestFail("vHBA not successfully generated.")
new_vhbas.append(new_vhba)
if vd_format == "mpath":
utils_misc.wait_for(
lambda: utils_npiv.is_mpath_devs_added(old_mpath_devs),
timeout=_TIMEOUT * 5)
if not utils_npiv.is_mpath_devs_added(old_mpath_devs):
raise exceptions.TestFail("mpath dev not generated.")
cur_mpath_devs = utils_npiv.find_mpath_devs()
new_mpath_devs = list(
set(cur_mpath_devs).difference(set(old_mpath_devs)))
logging.debug("The newly added mpath dev is: %s",
new_mpath_devs)
path_to_blk = "/dev/mapper/" + new_mpath_devs[0]
elif vd_format == "by_path":
new_vhba_scsibus = re.sub("\D", "", new_vhba)
utils_misc.wait_for(lambda: get_blks_by_scsi(new_vhba_scsibus),
timeout=_TIMEOUT)
new_blks = get_blks_by_scsi(new_vhba_scsibus)
if not new_blks:
raise exceptions.TestFail("blk dev not found with scsi_%s",
new_vhba_scsibus)
first_blk_dev = new_blks[0]
utils_misc.wait_for(lambda: get_symbols_by_blk(first_blk_dev),
timeout=_TIMEOUT)
lun_sl = get_symbols_by_blk(first_blk_dev)
if not lun_sl:
raise exceptions.TestFail(
"lun symbolic links not found in "
"/dev/disk/by-path/ for %s" % first_blk_dev)
lun_dev = lun_sl[0]
path_to_blk = os.path.join(_BY_PATH_DIR, lun_dev)
else:
pass
else:
raise exceptions.TestSkipError("Not provided how to pass"
"virtual disk to VM.")
# create qcow2 file on the block device with specified size
if path_to_blk:
cmd = "qemu-img create -f qcow2 %s %s" % (path_to_blk, disk_size)
try:
process.run(cmd, shell=True)
except process.cmdError as detail:
raise exceptions.TestFail(
"Fail to create qcow2 on blk dev: %s", detail)
else:
raise exceptions.TestFail("Don't have a valid path to blk dev.")
# prepare disk xml
if "vol" in vd_format:
vol_list = utlv.get_vol_list(pool_name,
vol_check=True,
timeout=_TIMEOUT * 3)
test_vol = list(vol_list.keys())[0]
disk_params = {
'type_name': disk_type,
'target_dev': device_target,
'target_bus': target_bus,
'source_pool': pool_name,
'source_volume': test_vol,
'driver_type': driver_type
}
else:
disk_params = {
'type_name': disk_type,
'device': disk_device,
'driver_name': driver_name,
'driver_type': driver_type,
'source_file': path_to_blk,
'target_dev': device_target,
'target_bus': target_bus
}
if vm.is_alive():
vm.destroy(gracefully=False)
new_disk = disk.Disk()
new_disk.xml = open(utlv.create_disk_xml(disk_params)).read()
# start vm with the virtual disk
vmxml.devices = vmxml.devices.append(new_disk)
vmxml.sync()
vm.start()
session = vm.wait_for_login()
cur_disks = virt_vm.get_disks()
mount_disk = "".join(list(set(old_disks) ^ set(cur_disks)))
# mkfs and mount disk in vm, create a file on that disk.
if not mount_disk:
logging.debug("old_disk: %s, new_disk: %s", old_disks, cur_disks)
raise exceptions.TestFail("No new disk found in vm.")
mkfs_and_mount(session, mount_disk)
create_file_in_vm(session, "/mnt/before_snapshot.txt", "before")
# virsh snapshot-create-as vm s --disk-only --diskspec vda,file=path
if snapshot_disk_only:
vm_blks = list(vm.get_disk_devices().keys())
options = "%s --disk-only" % snapshot_name
for vm_blk in vm_blks:
snapshot_file = snapshot_dir + "/" + vm_blk + "." + snapshot_name
if os.path.exists(snapshot_file):
os.remove(snapshot_file)
options = options + " --diskspec %s,file=%s" % (vm_blk,
snapshot_file)
else:
options = snapshot_name
utlv.check_exit_status(virsh.snapshot_create_as(vm_name, options))
# check virsh snapshot-list
logging.debug("Running: snapshot-list %s", vm_name)
snapshot_list = virsh.snapshot_list(vm_name)
logging.debug("snapshot list is: %s", snapshot_list)
if not snapshot_list:
raise exceptions.TestFail("snapshots not found after creation.")
# snapshot-revert doesn't support external snapshot for now. so
# only check this with internal snapshot.
if not snapshot_disk_only:
create_file_in_vm(session, "/mnt/after_snapshot.txt", "after")
logging.debug("Running: snapshot-revert %s %s", vm_name,
snapshot_name)
utlv.check_exit_status(
virsh.snapshot_revert(vm_name, snapshot_name))
session = vm.wait_for_login()
file_existence, file_content = get_file_in_vm(
session, "/mnt/after_snapshot.txt")
logging.debug("file exist = %s, file content = %s", file_existence,
file_content)
if file_existence:
raise exceptions.TestFail("The file created "
"after snapshot still exists.")
file_existence, file_content = get_file_in_vm(
session, "/mnt/before_snapshot.txt")
logging.debug("file eixst = %s, file content = %s", file_existence,
file_content)
if ((not file_existence) or (file_content.strip() != "before")):
raise exceptions.TestFail("The file created "
"before snapshot is lost.")
# delete snapshots
# if diskonly, delete --metadata and remove files
# if not diskonly, delete snapshot
if snapshot_disk_only:
options = "--metadata"
else:
options = ""
for snap in snapshot_list:
logging.debug("deleting snapshot %s with options %s", snap,
options)
result = virsh.snapshot_delete(vm_name, snap, options)
logging.debug("result of snapshot-delete: %s",
result.stdout.strip())
if snapshot_disk_only:
vm_blks = list(vm.get_disk_devices().keys())
for vm_blk in vm_blks:
snapshot_file = snapshot_dir + "/" + vm_blk + "." + snap
if os.path.exists(snapshot_file):
os.remove(snapshot_file)
snapshot_list = virsh.snapshot_list(vm_name)
if snapshot_list:
raise exceptions.TestFail("Snapshot not deleted: %s",
snapshot_list)
except Exception as detail:
raise exceptions.TestFail("exception happens: %s", detail)
finally:
logging.debug("Start to clean up env...")
vmxml_backup.sync()
if pool_ins and pool_ins.pool_exists(pool_name):
virsh.pool_destroy(pool_name)
for new_vhba in new_vhbas:
virsh.nodedev_destroy(new_vhba)
utils_npiv.restart_multipathd()
if old_mpath_conf:
utils_npiv.prepare_multipath_conf(conf_path=mpath_conf_path,
conf_content=old_mpath_conf,
replace_existing=True)
if not original_mpath_conf_exist and os.path.exists(mpath_conf_path):
os.remove(mpath_conf_path)
def run(test, params, env):
"""
1. prepare a vHBA
2. find the nodedev's lun name
3. prepare the lun dev's xml
4. start vm
5. attach disk xml to vm
6. login vm and check the disk
7. detach the virtual disk
8. check the blkdev gone
9. cleanup env.
"""
vm_name = params.get("main_vm", "avocado-vt-vm1")
wwpn = params.get("wwpn", "WWPN_EXAMPLE")
wwnn = params.get("wwnn", "WWNN_EXAMPLE")
disk_device = params.get("disk_device", "disk")
device_type = params.get("device_type", "file")
device_target = params.get("device_target", "vdb")
lun_dir_method = params.get("lun_dir_method", "by-path")
driver_name = params.get("driver_name", "qemu")
driver_type = params.get("driver_type", "raw")
target_bus = params.get("target_bus", "virtio")
readonly = params.get("readonly", "no")
new_vhbas = []
blk_dev = ""
lun_dev = ""
lun_dev_path = ""
lun_sl = []
new_disk = ""
old_mpath_conf = ""
mpath_conf_path = "/etc/multipath.conf"
original_mpath_conf_exist = os.path.exists(mpath_conf_path)
vm = env.get_vm(vm_name)
try:
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
vmxml_backup = vmxml.copy()
old_disk_count = vmxml.get_disk_count(vm_name)
# Prepare vHBA
online_hbas = utils_npiv.find_hbas("hba")
old_vhbas = utils_npiv.find_hbas("vhba")
if not online_hbas:
raise exceptions.TestSkipError("Host doesn't have online hba!")
old_mpath_conf = utils_npiv.prepare_multipath_conf(
conf_path=mpath_conf_path, replace_existing=True)
first_online_hba = online_hbas[0]
new_vhba = utils_npiv.nodedev_create_from_xml({
"nodedev_parent": first_online_hba,
"scsi_wwnn": wwnn,
"scsi_wwpn": wwpn
})
utils_misc.wait_for(lambda: utils_npiv.is_vhbas_added(old_vhbas),
timeout=_TIMEOUT)
if not utils_npiv.is_vhbas_added(old_vhbas):
raise exceptions.TestFail("vHBA is not successfully created.")
new_vhbas.append(new_vhba)
new_vhba_scsibus = re.sub("\D", "", new_vhba)
# Get the new block device generated by the new vHBA
utils_misc.wait_for(lambda: get_blks_by_scsi(new_vhba_scsibus),
timeout=_TIMEOUT)
blk_devs = get_blks_by_scsi(new_vhba_scsibus)
if not blk_devs:
raise exceptions.TestFail("block device not found with scsi_%s",
new_vhba_scsibus)
first_blk_dev = blk_devs[0]
# Get the symbolic link of the device in /dev/disk/by-[path|uuid|id]
logging.debug("first_blk_dev = %s, lun_dir_method = %s" %
(first_blk_dev, lun_dir_method))
utils_misc.wait_for(
lambda: get_symbols_by_blk(first_blk_dev, lun_dir_method),
timeout=_TIMEOUT)
lun_sl = get_symbols_by_blk(first_blk_dev, lun_dir_method)
if not lun_sl:
raise exceptions.TestFail("lun symbolic links not found under "
"/dev/disk/%s/ for block device %s." %
(lun_dir_method, blk_dev))
lun_dev = lun_sl[0]
lun_dev_path = "/dev/disk/" + lun_dir_method + "/" + lun_dev
# Prepare xml of virtual disk
disk_params = {
'type_name': device_type,
'device': disk_device,
'driver_name': driver_name,
'driver_type': driver_type,
'source_file': lun_dev_path,
'target_dev': device_target,
'target_bus': target_bus,
'readonly': readonly
}
disk_xml = os.path.join(data_dir.get_tmp_dir(), 'disk_xml.xml')
lun_disk_xml = utlv.create_disk_xml(disk_params)
copyfile(lun_disk_xml, disk_xml)
if not vm.is_alive():
vm.start()
session = vm.wait_for_login()
libvirt_vm = lib_vm.VM(vm_name, vm.params, vm.root_dir,
vm.address_cache)
old_disks = libvirt_vm.get_disks()
# Attach disk
dev_attach_status = virsh.attach_device(vm_name, disk_xml, debug=True)
utlv.check_exit_status(dev_attach_status)
cur_disk_count = vmxml.get_disk_count(vm_name)
cur_disks = libvirt_vm.get_disks()
if cur_disk_count <= old_disk_count:
raise exceptions.TestFail("Failed to attach disk: %s" %
lun_disk_xml)
new_disk = "".join(list(set(old_disks) ^ set(cur_disks)))
logging.debug("Attached device in vm:%s", new_disk)
# Check disk in VM
output = session.cmd_status_output('mkfs.ext4 -F %s' % new_disk)
logging.debug("mkfs.ext4 the disk in vm, result: %s", output[1])
if not check_vm_disk(session, new_disk, readonly):
raise exceptions.TestFail("Failed check the disk in vm.")
session.cmd_status_output('umount %s' % new_disk)
# Detach disk
dev_detach_status = virsh.detach_device(vm_name, disk_xml, debug=True)
utlv.check_exit_status(dev_detach_status)
cur_disks = libvirt_vm.get_disks()
if cur_disks != old_disks:
raise exceptions.TestFail("Detach disk failed.")
session.close()
finally:
utils_npiv.vhbas_cleanup(new_vhbas)
if vm.is_alive():
vm.destroy(gracefully=False)
vmxml_backup.sync()
process.system('service multipathd restart', verbose=True)
if old_mpath_conf:
utils_npiv.prepare_multipath_conf(conf_path=mpath_conf_path,
conf_content=old_mpath_conf,
replace_existing=True)
if not original_mpath_conf_exist and os.path.exists(mpath_conf_path):
os.remove(mpath_conf_path)