def __init__(self):
self.contour = vtk.vtkContourFilter()
self.mapper = vtk.vtkHierarchicalPolyDataMapper()
self.actor = vtk.vtkActor()
self.values = []
print "+Vtk_plot_contour"
def __init__(self):
self.plane = vtk.vtkPlane()
self.cutter = vtk.vtkCutter()
self.mapper = vtk.vtkHierarchicalPolyDataMapper()
self.actor = vtk.vtkActor()
self.range = None
print "+Vtk_plot_cutter"
def set_actor(self, vtk_cosa, coloring_by='RTData'):
#def set_actor(self, vtk_cosa, range_cosa, coloring_by = 'RTData'):
#mapper = vtk.vtkPolyDataMapper()
mapper = vtk.vtkHierarchicalPolyDataMapper()
mapper.SetInputConnection(vtk_cosa.GetOutputPort())
mapper.SetScalarModeToUsePointFieldData()
mapper.SetColorModeToMapScalars()
mapper.ScalarVisibilityOn()
#mapper.SetScalarRange( range_cosa )
mapper.SelectColorArray(coloring_by)
actor = vtk.vtkActor()
actor.SetMapper(mapper)
actor.GetProperty().SetRepresentationToWireframe()
self.actors.append(actor)
# create a rendering window and renderer
ren1 = vtk.vtkRenderer()
renWin = vtk.vtkRenderWindow()
renWin.AddRenderer(ren1)
renWin.StereoCapableWindowOn()
iren = vtk.vtkRenderWindowInteractor()
iren.SetRenderWindow(renWin)
reader = vtk.vtkGenericEnSightReader()
reader.SetCaseFileName("" + str(VTK_DATA_ROOT) +
"/Data/EnSight/elements6-bin.case")
reader.UpdateInformation()
reader.GetOutputInformation(0).Set(
vtk.vtkStreamingDemandDrivenPipeline.UPDATE_TIME_STEP(), 0.1)
geom = vtk.vtkGeometryFilter()
geom.SetInputConnection(reader.GetOutputPort())
mapper = vtk.vtkHierarchicalPolyDataMapper()
mapper.SetInputConnection(geom.GetOutputPort())
mapper.SetColorModeToMapScalars()
mapper.SetScalarModeToUsePointFieldData()
mapper.ColorByArrayComponent("pointTensors", 0)
mapper.SetScalarRange(0, 300)
actor = vtk.vtkActor()
actor.SetMapper(mapper)
# assign our actor to the renderer
ren1.AddActor(actor)
# enable user interface interactor
iren.Initialize()
renWin.Render()
# prevent the tk window from showing up then start the event loop
reader.SetDefaultExecutivePrototype(None)
# --- end of script --
# create a rendering window and renderer
ren1 = vtk.vtkRenderer()
renWin = vtk.vtkRenderWindow()
renWin.AddRenderer(ren1)
renWin.StereoCapableWindowOn()
iren = vtk.vtkRenderWindowInteractor()
iren.SetRenderWindow(renWin)
reader = vtk.vtkGenericEnSightReader()
# Make sure all algorithms use the composite data pipeline
cdp = vtk.vtkCompositeDataPipeline()
reader.SetDefaultExecutivePrototype(cdp)
reader.SetCaseFileName("" + str(VTK_DATA_ROOT) + "/Data/EnSight/blow2_bin.case")
reader.SetTimeValue(1)
geom = vtk.vtkGeometryFilter()
geom.SetInputConnection(reader.GetOutputPort())
mapper = vtk.vtkHierarchicalPolyDataMapper()
mapper.SetInputConnection(geom.GetOutputPort())
mapper.SetColorModeToMapScalars()
mapper.SetScalarModeToUsePointFieldData()
mapper.ColorByArrayComponent("displacement",0)
mapper.SetScalarRange(0,2.08)
actor = vtk.vtkActor()
actor.SetMapper(mapper)
# assign our actor to the renderer
ren1.AddActor(actor)
# enable user interface interactor
iren.Initialize()
ren1.GetActiveCamera().SetPosition(99.3932,17.6571,-22.6071)
ren1.GetActiveCamera().SetFocalPoint(3.5,12,1.5)
ren1.GetActiveCamera().SetViewAngle(30)
ren1.GetActiveCamera().SetViewUp(0.239617,-0.01054,0.97081)
PTS = DATAi.GetPointData()
#print PTS.GetScalars().GetRange()
PTS_PROP = PTS.GetArray(PROPERTY)
print PTS_PROP.GetValue(0)
for i in range(reader.GetNumberOfVariables()):
key = reader.GetPointArrayName(i)
print key,
print reader.GetPointArrayStatus(key)
#---------------------------------------------------------------| filters |----#
## reader
reader_geom = vtk.vtkGeometryFilter()
reader_geom.SetInputConnection(reader.GetOutputPort())
#
reader_mapper = vtk.vtkHierarchicalPolyDataMapper()
reader_mapper.SetInputConnection(reader_geom.GetOutputPort())
reader_mapper.SetScalarRange(set_range)
#
reader_actor = vtk.vtkActor()
reader_actor.SetMapper(reader_mapper)
reader_actor.GetProperty().SetRepresentationToWireframe()
## contour
Contour0 = vtk.vtkContourFilter()
Contour0.SetInputConnection(reader.GetOutputPort())
Contour0.SetValue(0, set_average)
#
contour_mapper = vtk.vtkHierarchicalPolyDataMapper()
contour_mapper.SetInputConnection(Contour0.GetOutputPort())
contour_mapper.SetImmediateModeRendering(1)
alg.SetDefaultExecutivePrototype(pip)
del pip
ren1 = vtk.vtkRenderer()
renWin = vtk.vtkRenderWindow()
renWin.AddRenderer(ren1)
iren = vtk.vtkRenderWindowInteractor()
iren.SetRenderWindow(renWin)
reader = vtk.vtkEnSightGoldBinaryReader()
reader.SetCaseFileName("" + str(VTK_DATA_ROOT) + "/Data/EnSight/naca.bin.case")
reader.SetTimeValue(3)
lut = vtk.vtkLookupTable()
lut.SetHueRange(0.667,0.0)
lut.SetTableRange(0.636,1.34)
geom = vtk.vtkGeometryFilter()
geom.SetInputConnection(reader.GetOutputPort())
blockMapper0 = vtk.vtkHierarchicalPolyDataMapper()
blockMapper0.SetInputConnection(geom.GetOutputPort())
blockActor0 = vtk.vtkActor()
blockActor0.SetMapper(blockMapper0)
ren1.AddActor(blockActor0)
ren1.ResetCamera()
cam1 = ren1.GetActiveCamera()
cam1.SetFocalPoint(0,0,0)
cam1.ParallelProjectionOff()
cam1.Zoom(70)
cam1.SetViewAngle(1.0)
renWin.SetSize(400,400)
iren.Initialize()
alg.SetDefaultExecutivePrototype(None)
# --- end of script --
ren1 = vtk.vtkRenderer()
renWin = vtk.vtkRenderWindow()
renWin.AddRenderer(ren1)
renWin.StereoCapableWindowOn()
iren = vtk.vtkRenderWindowInteractor()
iren.SetRenderWindow(renWin)
reader1 = vtk.vtkEnSightMasterServerReader()
# Make sure all algorithms use the composite data pipeline
cdp = vtk.vtkCompositeDataPipeline()
reader1.SetDefaultExecutivePrototype(cdp)
reader1.SetCaseFileName("" + str(VTK_DATA_ROOT) +
"/Data/EnSight/mandelbrot.sos")
reader1.SetCurrentPiece(0)
geom0 = vtk.vtkGeometryFilter()
geom0.SetInputConnection(reader1.GetOutputPort())
mapper0 = vtk.vtkHierarchicalPolyDataMapper()
mapper0.SetInputConnection(geom0.GetOutputPort())
mapper0.SetColorModeToMapScalars()
mapper0.SetScalarModeToUsePointFieldData()
mapper0.ColorByArrayComponent("Iterations", 0)
mapper0.SetScalarRange(0, 112)
actor0 = vtk.vtkActor()
actor0.SetMapper(mapper0)
reader2 = vtk.vtkEnSightMasterServerReader()
reader2.SetCaseFileName("" + str(VTK_DATA_ROOT) +
"/Data/EnSight/mandelbrot.sos")
reader2.SetCurrentPiece(1)
geom2 = vtk.vtkGeometryFilter()
geom2.SetInputConnection(reader2.GetOutputPort())
mapper2 = vtk.vtkHierarchicalPolyDataMapper()
mapper2.SetInputConnection(geom2.GetOutputPort())
renWin.AddRenderer(ren1)
iren = vtk.vtkRenderWindowInteractor()
iren.SetRenderWindow(renWin)
# read data
#
reader = vtk.vtkGenericEnSightReader()
# Make sure all algorithms use the composite data pipeline
cdp = vtk.vtkCompositeDataPipeline()
reader.SetDefaultExecutivePrototype(cdp)
del cdp
reader.SetCaseFileName("" + str(VTK_DATA_ROOT) + "/Data/EnSight/office6_bin.case")
reader.Update()
outline = vtk.vtkStructuredGridOutlineFilter()
outline.SetInputConnection(reader.GetOutputPort())
mapOutline = vtk.vtkHierarchicalPolyDataMapper()
mapOutline.SetInputConnection(outline.GetOutputPort())
outlineActor = vtk.vtkActor()
outlineActor.SetMapper(mapOutline)
outlineActor.GetProperty().SetColor(0,0,0)
# Create source for streamtubes
streamer = vtk.vtkStreamTracer()
streamer.SetInputConnection(reader.GetOutputPort())
streamer.SetStartPosition(0.1,2.1,0.5)
streamer.SetMaximumPropagation(500)
streamer.SetInitialIntegrationStep(0.1)
streamer.SetIntegrationDirectionToForward()
cone = vtk.vtkConeSource()
cone.SetResolution(8)
cones = vtk.vtkGlyph3D()
cones.SetInputConnection(streamer.GetOutputPort())
# create a rendering window and renderer
ren1 = vtk.vtkRenderer()
renWin = vtk.vtkRenderWindow()
renWin.AddRenderer(ren1)
renWin.StereoCapableWindowOn()
iren = vtk.vtkRenderWindowInteractor()
iren.SetRenderWindow(renWin)
reader1 = vtk.vtkEnSightMasterServerReader()
# Make sure all algorithms use the composite data pipeline
cdp = vtk.vtkCompositeDataPipeline()
reader1.SetDefaultExecutivePrototype(cdp)
reader1.SetCaseFileName("" + str(VTK_DATA_ROOT) + "/Data/EnSight/mandelbrot.sos")
reader1.SetCurrentPiece(0)
geom0 = vtk.vtkGeometryFilter()
geom0.SetInputConnection(reader1.GetOutputPort())
mapper0 = vtk.vtkHierarchicalPolyDataMapper()
mapper0.SetInputConnection(geom0.GetOutputPort())
mapper0.SetColorModeToMapScalars()
mapper0.SetScalarModeToUsePointFieldData()
mapper0.ColorByArrayComponent("Iterations",0)
mapper0.SetScalarRange(0,112)
actor0 = vtk.vtkActor()
actor0.SetMapper(mapper0)
reader2 = vtk.vtkEnSightMasterServerReader()
reader2.SetCaseFileName("" + str(VTK_DATA_ROOT) + "/Data/EnSight/mandelbrot.sos")
reader2.SetCurrentPiece(1)
geom2 = vtk.vtkGeometryFilter()
geom2.SetInputConnection(reader2.GetOutputPort())
mapper2 = vtk.vtkHierarchicalPolyDataMapper()
mapper2.SetInputConnection(geom2.GetOutputPort())
mapper2.SetColorModeToMapScalars()
alg.SetDefaultExecutivePrototype(pip)
del pip
ren1 = vtk.vtkRenderer()
renWin = vtk.vtkRenderWindow()
renWin.AddRenderer(ren1)
iren = vtk.vtkRenderWindowInteractor()
iren.SetRenderWindow(renWin)
reader = vtk.vtkEnSightGoldBinaryReader()
reader.SetCaseFileName("" + str(VTK_DATA_ROOT) + "/Data/EnSight/naca.bin.case")
reader.SetTimeValue(3)
lut = vtk.vtkLookupTable()
lut.SetHueRange(0.667, 0.0)
lut.SetTableRange(0.636, 1.34)
geom = vtk.vtkGeometryFilter()
geom.SetInputConnection(reader.GetOutputPort())
blockMapper0 = vtk.vtkHierarchicalPolyDataMapper()
blockMapper0.SetInputConnection(geom.GetOutputPort())
blockActor0 = vtk.vtkActor()
blockActor0.SetMapper(blockMapper0)
ren1.AddActor(blockActor0)
ren1.ResetCamera()
cam1 = ren1.GetActiveCamera()
cam1.SetFocalPoint(0, 0, 0)
cam1.ParallelProjectionOff()
cam1.Zoom(70)
cam1.SetViewAngle(1.0)
renWin.SetSize(400, 400)
iren.Initialize()
alg.SetDefaultExecutivePrototype(None)
# --- end of script --
renWin.AddRenderer(ren1)
iren = vtk.vtkRenderWindowInteractor()
iren.SetRenderWindow(renWin)
# read data
#
reader = vtk.vtkGenericEnSightReader()
# Make sure all algorithms use the composite data pipeline
cdp = vtk.vtkCompositeDataPipeline()
reader.SetDefaultExecutivePrototype(cdp)
del cdp
reader.SetCaseFileName("" + str(VTK_DATA_ROOT) + "/Data/EnSight/office6_bin.case")
reader.Update()
outline = vtk.vtkStructuredGridOutlineFilter()
outline.SetInputConnection(reader.GetOutputPort())
mapOutline = vtk.vtkHierarchicalPolyDataMapper()
mapOutline.SetInputConnection(outline.GetOutputPort())
outlineActor = vtk.vtkActor()
outlineActor.SetMapper(mapOutline)
outlineActor.GetProperty().SetColor(0,0,0)
# Create source for streamtubes
streamer = vtk.vtkStreamPoints()
streamer.SetInputConnection(reader.GetOutputPort())
streamer.SetStartPosition(0.1,2.1,0.5)
streamer.SetMaximumPropagationTime(500)
streamer.SetTimeIncrement(0.5)
streamer.SetIntegrationDirectionToForward()
cone = vtk.vtkConeSource()
cone.SetResolution(8)
cones = vtk.vtkGlyph3D()
cones.SetInputConnection(streamer.GetOutputPort())
def addAxes(axtype=None, c=None):
"""Draw axes on scene. Available axes types:
:param int axtype:
- 0, no axes,
- 1, draw three gray grid walls
- 2, show cartesian axes from (0,0,0)
- 3, show positive range of cartesian axes from (0,0,0)
- 4, show a triad at bottom left
- 5, show a cube at bottom left
- 6, mark the corners of the bounding box
- 7, draw a simple ruler at the bottom of the window
- 8, show the ``vtkCubeAxesActor`` object
- 9, show the bounding box outLine
- 10, show three circles representing the maximum bounding box
"""
vp = settings.plotter_instance
if axtype is not None:
vp.axes = axtype # overrride
r = vp.renderers.index(vp.renderer)
if not vp.axes:
return
if c is None: # automatic black or white
c = (0.9, 0.9, 0.9)
if numpy.sum(vp.renderer.GetBackground()) > 1.5:
c = (0.1, 0.1, 0.1)
if not vp.renderer:
return
if vp.axes_exist[r]:
return
# calculate max actors bounds
bns = []
for a in vp.actors:
if a and a.GetPickable():
b = a.GetBounds()
if b:
bns.append(b)
if len(bns):
max_bns = numpy.max(bns, axis=0)
min_bns = numpy.min(bns, axis=0)
vbb = (min_bns[0], max_bns[1], min_bns[2], max_bns[3], min_bns[4],
max_bns[5])
else:
vbb = vp.renderer.ComputeVisiblePropBounds()
max_bns = vbb
min_bns = vbb
sizes = (max_bns[1] - min_bns[0], max_bns[3] - min_bns[2],
max_bns[5] - min_bns[4])
############################################################
if vp.axes == 1 or vp.axes == True: # gray grid walls
nd = 4 # number of divisions in the smallest axis
off = -0.04 # label offset
step = numpy.min(sizes) / nd
if not step:
# bad proportions, use vtkCubeAxesActor
vp.addAxes(axtype=8, c=c)
vp.axes = 1
return
rx, ry, rz = numpy.rint(sizes / step).astype(int)
if max([rx / ry, ry / rx, rx / rz, rz / rx, ry / rz, rz / ry]) > 15:
# bad proportions, use vtkCubeAxesActor
vp.addAxes(axtype=8, c=c)
vp.axes = 1
return
gxy = shapes.Grid(pos=(0.5, 0.5, 0),
normal=[0, 0, 1],
bc=None,
resx=rx,
resy=ry)
gxz = shapes.Grid(pos=(0.5, 0, 0.5),
normal=[0, 1, 0],
bc=None,
resx=rz,
resy=rx)
gyz = shapes.Grid(pos=(0, 0.5, 0.5),
normal=[1, 0, 0],
bc=None,
resx=rz,
resy=ry)
gxy.alpha(0.06).wire(False).color(c).lineWidth(1)
gxz.alpha(0.04).wire(False).color(c).lineWidth(1)
gyz.alpha(0.04).wire(False).color(c).lineWidth(1)
xa = shapes.Line([0, 0, 0], [1, 0, 0], c=c, lw=1)
ya = shapes.Line([0, 0, 0], [0, 1, 0], c=c, lw=1)
za = shapes.Line([0, 0, 0], [0, 0, 1], c=c, lw=1)
xt, yt, zt, ox, oy, oz = [None] * 6
if vp.xtitle:
xtitle = vp.xtitle
if min_bns[0] <= 0 and max_bns[1] > 0: # mark x origin
ox = shapes.Cube([-min_bns[0] / sizes[0], 0, 0],
side=0.008,
c=c)
if len(vp.xtitle) == 1: # add axis length info
xtitle = vp.xtitle + " /" + utils.precision(sizes[0], 4)
wpos = [1 - (len(vp.xtitle) + 1) / 40, off, 0]
xt = shapes.Text(xtitle,
pos=wpos,
normal=(0, 0, 1),
s=0.025,
c=c,
justify="bottom-right")
if vp.ytitle:
if min_bns[2] <= 0 and max_bns[3] > 0: # mark y origin
oy = shapes.Cube([0, -min_bns[2] / sizes[1], 0],
side=0.008,
c=c)
yt = shapes.Text(vp.ytitle,
pos=(0, 0, 0),
normal=(0, 0, 1),
s=0.025,
c=c,
justify="bottom-right")
if len(vp.ytitle) == 1:
wpos = [off, 1 - (len(vp.ytitle) + 1) / 40, 0]
yt.pos(wpos)
else:
wpos = [off * 0.7, 1 - (len(vp.ytitle) + 1) / 40, 0]
yt.rotateZ(90).pos(wpos)
if vp.ztitle:
if min_bns[4] <= 0 and max_bns[5] > 0: # mark z origin
oz = shapes.Cube([0, 0, -min_bns[4] / sizes[2]],
side=0.008,
c=c)
zt = shapes.Text(vp.ztitle,
pos=(0, 0, 0),
normal=(1, -1, 0),
s=0.025,
c=c,
justify="bottom-right")
if len(vp.ztitle) == 1:
wpos = [off * 0.6, off * 0.6, 1 - (len(vp.ztitle) + 1) / 40]
zt.rotate(90, (1, -1, 0)).pos(wpos)
else:
wpos = [off * 0.3, off * 0.3, 1 - (len(vp.ztitle) + 1) / 40]
zt.rotate(180, (1, -1, 0)).pos(wpos)
acts = [gxy, gxz, gyz, xa, ya, za, xt, yt, zt, ox, oy, oz]
for a in acts:
if a:
a.PickableOff()
aa = Assembly(acts)
aa.pos(min_bns[0], min_bns[2], min_bns[4])
aa.SetScale(sizes)
aa.PickableOff()
vp.renderer.AddActor(aa)
vp.axes_exist[r] = aa
elif vp.axes == 2 or vp.axes == 3:
vbb = vp.renderer.ComputeVisiblePropBounds() # to be double checked
xcol, ycol, zcol = "db", "dg", "dr"
s = 1
alpha = 1
centered = False
x0, x1, y0, y1, z0, z1 = vbb
dx, dy, dz = x1 - x0, y1 - y0, z1 - z0
aves = numpy.sqrt(dx * dx + dy * dy + dz * dz) / 2
x0, x1 = min(x0, 0), max(x1, 0)
y0, y1 = min(y0, 0), max(y1, 0)
z0, z1 = min(z0, 0), max(z1, 0)
if vp.axes == 3:
if x1 > 0:
x0 = 0
if y1 > 0:
y0 = 0
if z1 > 0:
z0 = 0
dx, dy, dz = x1 - x0, y1 - y0, z1 - z0
acts = []
if x0 * x1 <= 0 or y0 * z1 <= 0 or z0 * z1 <= 0: # some ranges contain origin
zero = shapes.Sphere(r=aves / 120 * s, c="k", alpha=alpha, res=10)
acts += [zero]
if len(vp.xtitle) and dx > aves / 100:
xl = shapes.Cylinder([[x0, 0, 0], [x1, 0, 0]],
r=aves / 250 * s,
c=xcol,
alpha=alpha)
xc = shapes.Cone(pos=[x1, 0, 0],
c=xcol,
alpha=alpha,
r=aves / 100 * s,
height=aves / 25 * s,
axis=[1, 0, 0],
res=10)
wpos = [
x1 - (len(vp.xtitle) + 1) * aves / 40 * s, -aves / 25 * s, 0
] # aligned to arrow tip
if centered:
wpos = [(x0 + x1) / 2 - len(vp.xtitle) / 2 * aves / 40 * s,
-aves / 25 * s, 0]
xt = shapes.Text(vp.xtitle,
pos=wpos,
normal=(0, 0, 1),
s=aves / 40 * s,
c=xcol)
acts += [xl, xc, xt]
if len(vp.ytitle) and dy > aves / 100:
yl = shapes.Cylinder([[0, y0, 0], [0, y1, 0]],
r=aves / 250 * s,
c=ycol,
alpha=alpha)
yc = shapes.Cone(pos=[0, y1, 0],
c=ycol,
alpha=alpha,
r=aves / 100 * s,
height=aves / 25 * s,
axis=[0, 1, 0],
res=10)
wpos = [
-aves / 40 * s, y1 - (len(vp.ytitle) + 1) * aves / 40 * s, 0
]
if centered:
wpos = [
-aves / 40 * s,
(y0 + y1) / 2 - len(vp.ytitle) / 2 * aves / 40 * s, 0
]
yt = shapes.Text(vp.ytitle,
pos=(0, 0, 0),
normal=(0, 0, 1),
s=aves / 40 * s,
c=ycol)
yt.rotate(90, [0, 0, 1]).pos(wpos)
acts += [yl, yc, yt]
if len(vp.ztitle) and dz > aves / 100:
zl = shapes.Cylinder([[0, 0, z0], [0, 0, z1]],
r=aves / 250 * s,
c=zcol,
alpha=alpha)
zc = shapes.Cone(pos=[0, 0, z1],
c=zcol,
alpha=alpha,
r=aves / 100 * s,
height=aves / 25 * s,
axis=[0, 0, 1],
res=10)
wpos = [
-aves / 50 * s, -aves / 50 * s,
z1 - (len(vp.ztitle) + 1) * aves / 40 * s
]
if centered:
wpos = [
-aves / 50 * s, -aves / 50 * s,
(z0 + z1) / 2 - len(vp.ztitle) / 2 * aves / 40 * s
]
zt = shapes.Text(vp.ztitle,
pos=(0, 0, 0),
normal=(1, -1, 0),
s=aves / 40 * s,
c=zcol)
zt.rotate(180, (1, -1, 0)).pos(wpos)
acts += [zl, zc, zt]
for a in acts:
a.PickableOff()
ass = Assembly(acts)
ass.PickableOff()
vp.renderer.AddActor(ass)
vp.axes_exist[r] = ass
elif vp.axes == 4:
axact = vtk.vtkAxesActor()
axact.SetShaftTypeToCylinder()
axact.SetCylinderRadius(0.03)
axact.SetXAxisLabelText(vp.xtitle)
axact.SetYAxisLabelText(vp.ytitle)
axact.SetZAxisLabelText(vp.ztitle)
axact.GetXAxisShaftProperty().SetColor(0, 0, 1)
axact.GetZAxisShaftProperty().SetColor(1, 0, 0)
axact.GetXAxisTipProperty().SetColor(0, 0, 1)
axact.GetZAxisTipProperty().SetColor(1, 0, 0)
bc = numpy.array(vp.renderer.GetBackground())
if numpy.sum(bc) < 1.5:
lc = (1, 1, 1)
else:
lc = (0, 0, 0)
axact.GetXAxisCaptionActor2D().GetCaptionTextProperty().BoldOff()
axact.GetYAxisCaptionActor2D().GetCaptionTextProperty().BoldOff()
axact.GetZAxisCaptionActor2D().GetCaptionTextProperty().BoldOff()
axact.GetXAxisCaptionActor2D().GetCaptionTextProperty().ItalicOff()
axact.GetYAxisCaptionActor2D().GetCaptionTextProperty().ItalicOff()
axact.GetZAxisCaptionActor2D().GetCaptionTextProperty().ItalicOff()
axact.GetXAxisCaptionActor2D().GetCaptionTextProperty().ShadowOff()
axact.GetYAxisCaptionActor2D().GetCaptionTextProperty().ShadowOff()
axact.GetZAxisCaptionActor2D().GetCaptionTextProperty().ShadowOff()
axact.GetXAxisCaptionActor2D().GetCaptionTextProperty().SetColor(lc)
axact.GetYAxisCaptionActor2D().GetCaptionTextProperty().SetColor(lc)
axact.GetZAxisCaptionActor2D().GetCaptionTextProperty().SetColor(lc)
axact.PickableOff()
icn = addIcon(axact, size=0.1)
vp.axes_exist[r] = icn
elif vp.axes == 5:
axact = vtk.vtkAnnotatedCubeActor()
axact.GetCubeProperty().SetColor(0.75, 0.75, 0.75)
axact.SetTextEdgesVisibility(0)
axact.SetFaceTextScale(0.4)
axact.GetXPlusFaceProperty().SetColor(colors.getColor("b"))
axact.GetXMinusFaceProperty().SetColor(colors.getColor("db"))
axact.GetYPlusFaceProperty().SetColor(colors.getColor("g"))
axact.GetYMinusFaceProperty().SetColor(colors.getColor("dg"))
axact.GetZPlusFaceProperty().SetColor(colors.getColor("r"))
axact.GetZMinusFaceProperty().SetColor(colors.getColor("dr"))
axact.PickableOff()
icn = addIcon(axact, size=0.06)
vp.axes_exist[r] = icn
elif vp.axes == 6:
ocf = vtk.vtkOutlineCornerFilter()
ocf.SetCornerFactor(0.1)
largestact, sz = None, -1
for a in vp.actors:
if a.GetPickable():
b = a.GetBounds()
d = max(b[1] - b[0], b[3] - b[2], b[5] - b[4])
if sz < d:
largestact = a
sz = d
if isinstance(largestact, Assembly):
ocf.SetInputData(largestact.getActor(0).GetMapper().GetInput())
else:
ocf.SetInputData(largestact.polydata())
ocf.Update()
ocMapper = vtk.vtkHierarchicalPolyDataMapper()
ocMapper.SetInputConnection(0, ocf.GetOutputPort(0))
ocActor = vtk.vtkActor()
ocActor.SetMapper(ocMapper)
bc = numpy.array(vp.renderer.GetBackground())
if numpy.sum(bc) < 1.5:
lc = (1, 1, 1)
else:
lc = (0, 0, 0)
ocActor.GetProperty().SetColor(lc)
ocActor.PickableOff()
vp.renderer.AddActor(ocActor)
vp.axes_exist[r] = ocActor
elif vp.axes == 7:
# draws a simple ruler at the bottom of the window
ls = vtk.vtkLegendScaleActor()
ls.RightAxisVisibilityOff()
ls.TopAxisVisibilityOff()
ls.LegendVisibilityOff()
ls.LeftAxisVisibilityOff()
ls.GetBottomAxis().SetNumberOfMinorTicks(1)
ls.GetBottomAxis().GetProperty().SetColor(c)
ls.GetBottomAxis().GetLabelTextProperty().SetColor(c)
ls.GetBottomAxis().GetLabelTextProperty().BoldOff()
ls.GetBottomAxis().GetLabelTextProperty().ItalicOff()
ls.GetBottomAxis().GetLabelTextProperty().ShadowOff()
ls.PickableOff()
vp.renderer.AddActor(ls)
vp.axes_exist[r] = ls
elif vp.axes == 8:
ca = vtk.vtkCubeAxesActor()
ca.SetBounds(vbb)
if vp.camera:
ca.SetCamera(vp.camera)
else:
ca.SetCamera(vp.renderer.GetActiveCamera())
ca.GetXAxesLinesProperty().SetColor(c)
ca.GetYAxesLinesProperty().SetColor(c)
ca.GetZAxesLinesProperty().SetColor(c)
for i in range(3):
ca.GetLabelTextProperty(i).SetColor(c)
ca.GetTitleTextProperty(i).SetColor(c)
ca.SetTitleOffset(5)
ca.SetFlyMode(3)
ca.SetXTitle(vp.xtitle)
ca.SetYTitle(vp.ytitle)
ca.SetZTitle(vp.ztitle)
if vp.xtitle == "":
ca.SetXAxisVisibility(0)
ca.XAxisLabelVisibilityOff()
if vp.ytitle == "":
ca.SetYAxisVisibility(0)
ca.YAxisLabelVisibilityOff()
if vp.ztitle == "":
ca.SetZAxisVisibility(0)
ca.ZAxisLabelVisibilityOff()
ca.PickableOff()
vp.renderer.AddActor(ca)
vp.axes_exist[r] = ca
return
elif vp.axes == 9:
src = vtk.vtkCubeSource()
src.SetXLength(vbb[1] - vbb[0])
src.SetYLength(vbb[3] - vbb[2])
src.SetZLength(vbb[5] - vbb[4])
src.Update()
ca = Actor(src.GetOutput(), c=c, alpha=0.5, wire=1)
ca.pos((vbb[0] + vbb[1]) / 2, (vbb[3] + vbb[2]) / 2,
(vbb[5] + vbb[4]) / 2)
ca.PickableOff()
vp.renderer.AddActor(ca)
vp.axes_exist[r] = ca
elif vp.axes == 10:
x0 = (vbb[0] + vbb[1]) / 2, (vbb[3] + vbb[2]) / 2, (vbb[5] +
vbb[4]) / 2
rx, ry, rz = (vbb[1] - vbb[0]) / 2, (vbb[3] - vbb[2]) / 2, (vbb[5] -
vbb[4]) / 2
rm = max(rx, ry, rz)
xc = shapes.Disc(x0, (0, 0, 1),
r1=rm,
r2=rm,
c='lr',
bc=None,
res=1,
resphi=72)
yc = shapes.Disc(x0, (0, 1, 0),
r1=rm,
r2=rm,
c='lg',
bc=None,
res=1,
resphi=72)
zc = shapes.Disc(x0, (1, 0, 0),
r1=rm,
r2=rm,
c='lb',
bc=None,
res=1,
resphi=72)
xc.clean().alpha(0.2).wire().lineWidth(2.5).PickableOff()
yc.clean().alpha(0.2).wire().lineWidth(2.5).PickableOff()
zc.clean().alpha(0.2).wire().lineWidth(2.5).PickableOff()
ca = xc + yc + zc
ca.PickableOff()
vp.renderer.AddActor(ca)
vp.axes_exist[r] = ca
else:
colors.printc('~bomb Keyword axes must be in range [0-10].', c=1)
colors.printc('''
~target Available axes types:
0 = no axes,
1 = draw three gray grid walls
2 = show cartesian axes from (0,0,0)
3 = show positive range of cartesian axes from (0,0,0)
4 = show a triad at bottom left
5 = show a cube at bottom left
6 = mark the corners of the bounding box
7 = draw a simple ruler at the bottom of the window
8 = show the vtkCubeAxesActor object
9 = show the bounding box outline
10 = show three circles representing the maximum bounding box
''',
c=1,
bold=0)
if not vp.axes_exist[r]:
vp.axes_exist[r] = True
return
PTS_PROP = PTS.GetArray(PROPERTY)
print PTS_PROP.GetValue(0)
for i in range(reader.GetNumberOfVariables()):
key = reader.GetPointArrayName(i)
print key,
print reader.GetPointArrayStatus(key)
#------------------------------------------------------------| plot table |----#
#---------------------------------------------------------------| filters |----#
## reader
reader_geom = vtk.vtkGeometryFilter()
reader_geom.SetInputConnection(reader.GetOutputPort())
#
reader_mapper = vtk.vtkHierarchicalPolyDataMapper()
reader_mapper.SetInputConnection(reader_geom.GetOutputPort())
reader_mapper.SetScalarRange(set_range)
#
reader_actor = vtk.vtkActor()
reader_actor.SetMapper(reader_mapper)
reader_actor.GetProperty().SetRepresentationToWireframe()
#
## scalarbar
scalarBar = vtk.vtkScalarBarActor()
scalarBar.SetLookupTable(reader_mapper.GetLookupTable())
scalarBar.SetTitle(PROPERTY)
scalarBar.SetNumberOfLabels(5)
scalarBar.SetOrientationToHorizontal()
scalarBar.SetWidth(0.50)
scalarBar.SetHeight(0.1)
