Esempio n. 1
0
def negative_vbr_flowfilter():
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)
    print "Negative test scenario test cases"
    print 'TEST 3 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone negative  the VbrFlowFilterEntry to vbrthree'
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst', "up")
    if retval != 0:
        print "Controller state check Failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'VbrIfTwo')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne',
                                                'ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller(
        'VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst')
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne',
                                                'VbrTwo',
                                                'ControllerFirst',
                                                presence='yes',
                                                position=1)
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
                                                        'VbrTwo',
                                                        'VbrIfTwo',
                                                        'ControllerFirst',
                                                        presence='yes',
                                                        position=0)
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    retval = flowlistentry.create_flowlist('FlowlistOne')
    if retval != 0:
        print "FlowList Create Failed"
        exit(1)

    retval = flowlistentry.create_flowlistentry('FlowlistOne',
                                                'FlowlistentryOne',
                                                'ControllerFirst')
    if retval != 0:
        print "FlowlistEntry Create Failed"
        exit(1)

    retval = flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
    if retval != 0:
        print "VBRFlowFilter Create Failed"
        exit(1)

    retval = flowfilter.create_flowfilter_entry('VtnOne|VbrOne',
                                                'FlowfilterOne')
    if retval != 0:
        print "VBRFlowFilterEntry Create Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_entry('VtnOne|VbrOne',
                                                  'FlowfilterOne',
                                                  presence='yes',
                                                  position=0)
    if retval != 0:
        print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne',
                                                          'ControllerFirst',
                                                          'FlowfilterOne',
                                                          presence='yes',
                                                          position=0)
    if retval != 0:
        print "FlowFilter validation at Controller Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrThree', 'ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrThree', 'VbrIfThree')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)

    retval = flowfilter.update_flowfilter_entry('VtnOne|VbrOne',
                                                'FlowfilterOne',
                                                'NegativeFlowfilter')
    if retval != 0:
        print "VBRFlowFilterEntry at negative  priority and dscp has  Failed"
        print "Because flowfilter priority range up 63 and dscp range up to 7 its more than test was faild its showing Bad error"
        exit(1)

    retval = flowfilter.validate_flowfilter_entry(
        'VtnOne|VbrOne',
        'FlowfilterOne|NegativeFlowfilter',
        presence='yes',
        position=0)
    if retval != 0:
        print "VBRFlowFilterEntry Negative  Validate Failed at Co-ordinator"
        exit(1)

    retval = flowfilter.delete_flowfilter_entry('VtnOne|VbrOne',
                                                'FlowfilterOne')
    if retval != 0:
        print "VBRFlowFilterEntry deletete Failed"
        exit(1)

    retval = flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
    if retval != 0:
        print "VBRFlowFilter deletete Failed"
        exit(1)

    retval = flowlistentry.delete_flowlistentry('FlowlistOne',
                                                'FlowlistentryOne')
    if retval != 0:
        print "FlowilistEntry deletete Failed"
        exit(1)

    retval = flowlistentry.delete_flowlist('FlowlistOne')
    if retval != 0:
        print "Flowilist deletete Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller('VtnOne|VbrTwo',
                                                          'ControllerFirst',
                                                          'FlowfilterOne',
                                                          presence='no',
                                                          position=0)
    if retval != 0:
        print "FlowFilter validation Failed after deleting"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "DELETE VTN Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
                                                'ControllerFirst',
                                                presence='no')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VBR->UPDATE FLOWFILTER TEST SUCCESS"
Esempio n. 2
0
def test_vbr_flowfilter_drop():
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)

    print "TEST 1 : VBR->FLOWFILTER TEST"
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst', "up")
    if retval != 0:
        print "Controller state check Failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'VbrIfTwo')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne',
                                                'ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller(
        'VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst')
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne',
                                                'VbrTwo',
                                                'ControllerFirst',
                                                presence='yes',
                                                position=1)
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
                                                        'VbrTwo',
                                                        'VbrIfTwo',
                                                        'ControllerFirst',
                                                        presence='yes',
                                                        position=0)
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    retval = flowlistentry.create_flowlist('FlowlistOne')
    if retval != 0:
        print "FlowList Create Failed"
        exit(1)

    retval = flowlistentry.create_flowlistentry('FlowlistOne',
                                                'FlowlistentryOne',
                                                'ControllerFirst')
    if retval != 0:
        print "FlowlistEntry Create Failed"
        exit(1)

    retval = flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOneDrop')
    if retval != 0:
        print "VBRFlowFilter Create Failed"
        exit(1)

    retval = flowfilter.create_flowfilter_entry('VtnOne|VbrOne',
                                                'FlowfilterOneDrop')
    if retval != 0:
        print "VBRFlowFilterEntry Create Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne',
                                                          'ControllerFirst',
                                                          'FlowfilterOneDrop',
                                                          presence='yes',
                                                          position=0)
    if retval != 0:
        print "FlowFilter validation at Controller Failed"
        exit(1)

    retval = flowfilter.delete_flowfilter_entry('VtnOne|VbrOne',
                                                'FlowfilterOneDrop')
    if retval != 0:
        print "VBRFlowFilterEntry deletete Failed"
        exit(1)

    retval = flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOneDrop')
    if retval != 0:
        print "VBRFlowFilter deletete Failed"
        exit(1)

    retval = flowlistentry.delete_flowlistentry('FlowlistOne',
                                                'FlowlistentryOne')
    if retval != 0:
        print "FlowilistEntry deletete Failed"
        exit(1)

    retval = flowlistentry.delete_flowlist('FlowlistOne')
    if retval != 0:
        print "Flowilist deletete Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne',
                                                          'ControllerFirst',
                                                          'FlowfilterOneDrop',
                                                          presence='no',
                                                          position=0)
    if retval != 0:
        print "FlowFilter validation Failed after deleting"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "DELETE VTN Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
                                                'ControllerFirst',
                                                presence='no')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VBR->FLOWFILTER TEST SUCCESS"
def test_vtn_flowfilter():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 1 : VTN->FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne', 'VTNFlowfilterOne')
  if retval != 0:
    print "VTNFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne', 'VTNFlowfilterOne')
  if retval != 0:
    print "VTNFlowFilterEntry Create Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne', 'VTNFlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "VTNFlowFilterEntry Validate Failed at Co-ordinator"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne', 'ControllerFirst', 'VTNFlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter_entry('VtnOne', 'VTNFlowfilterOne')
  if retval != 0:
    print "VTNFlowFilterEntry deletete Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter('VtnOne', 'VTNFlowfilterOne')
  if retval != 0:
    print "VTNFlowFilter deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
  if retval != 0:
    print "FlowilistEntry deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlist('FlowlistOne')
  if retval != 0:
    print "Flowilist deletete Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne', 'ControllerFirst', 'VTNFlowfilterOne', presence='no', position=0)
  if retval != 0:
    print "FlowFilter validation Failed after deleting"
    exit(1)

  retval=vtn_vbr.delete_vtn('VtnOne')
  if retval != 0:
    print "DELETE VTN Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  print "DELETE CONTROLLER"
  retval=controller.delete_controller_ex('ControllerFirst')
  if retval != 0:
     print "CONTROLLER delete failed"
     exit(1)
  print "VTN->FLOWFILTER TEST SUCCESS"
Esempio n. 4
0
def test_vtn_mininet_ping_demo1():

    print """TEST 1 : One vtn and one VBridge with Two Interfaces one Portmap each
    send packets between two configured host(H1,H3)"""
    print "CREATE Controller"
    print "VTNONE->VBRONE->VBRIFONE->PORTMAP"
    print "VTNONE->VBRONE->VBRIFTWO->PORTMAP"

    child = create_mininet_topology('MININETONE', 'ControllerFirst', '2')
    if child.isalive() == True :
        print "Topology creation Success!!!"
    else:
        print "Topology creation Failed"
        close_topology(child)
        exit(1)

    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 1 :Controller Create Failed"
        close_topology(child)
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
    if retval != 0:
        print "VBRIFONE Create Failed"
        close_topology(child)
        exit(1)
    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst', position=0)
    if retval != 0:
        print "VBRIFONE Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
    if retval != 0:
        print "VBRIFTWO Create Failed"
        close_topology(child)
        exit(1)
    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', position=1)
    if retval != 0:
        print "VBRIFTWO Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'VbrIfOne', vlan_tagged=0);
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'VbrIfTwo', vlan_tagged=0);
    if retval != 0:
        print "VBRIF2 Portmap Create Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst', presence="yes");
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', presence="yes");
    if retval != 0:
        print "VBRIF2 Portmap Validate Failed"
        close_topology(child)
        exit(1)

    retval = ping_mininet (child,'h1','h3')
    if retval != 0:
        print "MININET PING FAILED"

    close_topology(child)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        close_topology(child)
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        close_topology(child)
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
    if retval != 0:
        print "VTN1->VBR1->VBRIF1 Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst', presence="no", position=0)
    if retval != 0:
        print "After Delete VBRIFONE Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
    if retval != 0:
        print "VTN1->VBR1->VBRIF1 Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', presence="no", position=1)
    if retval != 0:
        print "After Delete VBRIFTWO Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne', 'VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne', 'ControllerFirst', presence="no")
    if retval != 0:
        print "After Delete VBR Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst', presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "MININET PING DEMO 1 TEST SUCCESS"
Esempio n. 5
0
def test_vbr_flowfilter_pass():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)
  print "action type create pass"
  print "TEST 5 : VBR->FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)


  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOnePass', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilterEntry deletete Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilter deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
  if retval != 0:
    print "FlowilistEntry deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlist('FlowlistOne')
  if retval != 0:
    print "Flowilist deletete Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOnePass', presence='no', position=0)
  if retval != 0:
    print "FlowFilter validation Failed after deleting"
    exit(1)

  retval=vtn_vbr.delete_vtn('VtnOne')
  if retval != 0:
    print "DELETE VTN Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  print "DELETE CONTROLLER"
  retval=controller.delete_controller_ex('ControllerFirst')
  if retval != 0:
     print "CONTROLLER delete failed"
     exit(1)
  print "VBR->FLOWFILTER TEST SUCCESS"
def test_multi_vtn_with_vbr_multi_controller_audit_test():
    print "TEST 3 : 2 Tenants with one VBridge each in multi-controller and test AUDIT"
    print "CONTROLLER1->VTNONE->VBRONE"
    print "CONTROLLER1->VTNTWO->VBRONE"
    print "CONTROLLER2->VTNTHREE->VBRONE"
    print "CONTROLLER2->VTNFOUR->VBRONE"
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller1 Create Failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "Controller2 Create Failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN1 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnTwo')
    if retval != 0:
        print "VTN2 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnThree')
    if retval != 0:
        print "VTN3 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnFour')
    if retval != 0:
        print "VTN4 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1/VTN1 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnTwo','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1/VTN2 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnThree','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR3/VTN3 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnFour','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR3/VTN4 Create Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',position=0)
    if retval != 0:
        print "VTN1 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnTwo','ControllerFirst',position=1)
    if retval != 0:
        print "VTN2 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnThree','ControllerSecond',position=1)
    if retval != 0:
        print "VTN3 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnFour','ControllerSecond',position=0)
    if retval != 0:
        print "VTN4 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1/VTN1 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnTwo','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1/VTN2 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnThree','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR3/VTN3 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnFour','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR4/VTN4 Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
        print "controller1 invalid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerSecond')['invalid_ipaddr']
    retval = controller.update_controller_ex('ControllerSecond',ipaddr=test_invalid_ipaddr)
    if retval != 0:
        print "controller2 invalid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"down")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    print "****DELETE VBR****"
    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR1/VTN1 Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnTwo','VbrOne')
    if retval != 0:
        print "VBR1/VTN2 Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnThree','VbrThree')
    if retval != 0:
        print "VBR3/VTN3 Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnFour','VbrThree')
    if retval != 0:
        print "VBR3/VTN4 Delete Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
        print "controller1 valid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    test_controller_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerSecond')['ipaddr']
    retval = controller.update_controller_ex('ControllerSecond',ipaddr=test_controller_ipaddr)
    if retval != 0:
        print "controller2 valid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VBR1/VTN1 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN1 Validate Failed"
        exit(1)


    retval =  vtn_vbr.validate_vbr_at_controller('VtnTwo','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VBR1/VTN2 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnTwo','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN2 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnThree','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "VBR3/VTN3 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnThree','ControllerSecond',presence="no")
    if retval != 0:
        print "VTN3 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnFour','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "VBR3/VTN4 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnFour','ControllerSecond',presence="no")
    if retval != 0:
        print "VTN4 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN1 Delete Failed in coordinator"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnTwo')
    if retval != 0:
        print "VTN2 Delete Failed in coordinator"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnThree')
    if retval != 0:
        print "VTN3 Delete Failed in coordinator"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnFour')
    if retval != 0:
        print "VTN4 Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER1 delete failed"
        exit(1)

    retval = controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER2 delete failed"
        exit(1)

    print "MULTI VTN->VBR MULTI_CONTROLLER AUDIT TEST SUCCESS"
def test_vtn_vbr_vlanmap_no_vlanid_multi_controller():

    print "TEST 6 : VTenant with one VBridge one VLANMAP with vlan_id and logicalport_id"
    print                "then update vlan_id to no_vlan_id with multi-controller"
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 6 :Controller1 Create Failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "TEST 6 :Controller2 Create Failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR3 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=1)
    if retval != 0:
        print "VLANMAP1 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=1)
    if retval != 0:
        print "VLANMAP2 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP1 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP2 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=2)
    if retval != 0:
        print "VLANMAP1 upadte Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapTwo',update_id=2)
    if retval != 0:
        print "VLANMAP2 upadte Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=1)
    if retval != 0:
        print "After update VLANMAP Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',no_vlan_id=1)
    if retval != 0:
        print "After update VLANMAP Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed at controller1"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
    if retval != 0:
        print "VTN Validate Failed at controller2"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=1)
    if retval != 0:
        print "VLANMAP1 Delete Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=1)
    if retval != 0:
        print "VLANMAP3 Delete Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=1)
    if retval != 0:
        print "After Delete VLANMAP1 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',presence="no",position=0,no_vlan_id=1)
    if retval != 0:
        print "After Delete VLANMAP3 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR1/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
    if retval != 0:
        print "VBR3/VTN Delete Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "After Delete VBR1 Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "After Delete VBR3 Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted at controller1"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted at controller2"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval=controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER1 delete failed"
        exit(1)

    retval=controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER2 delete failed"
        exit(1)
    print "VTN->VBR->VLANMAP with vlan_id->no_vlan_id with multi-controller TEST SUCCESS"
def test_vtn_vbr_multi_vlanmap_multi_controller():

    print "TEST 3 : VTenant with one VBridge two VLANMAP with multi-controller"
    print "CREATE Controller1"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 3 :Controller1 Create Failed"
        exit(1)
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    print "CREATE Controller2"
    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "TEST 3 :Controller2 Create Failed"
        exit(1)
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBROne Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBRTwo Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
    if retval != 0:
        print "VLANMAP1 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapThree',no_vlan=0)
    if retval != 0:
        print "VLANMAP3 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',position=0,no_vlan_id=0)
    if retval != 0:
        print "After Create VLANMAP1 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapThree','ControllerSecond',position=0,no_vlan_id=0)
    if retval != 0:
        print "After Create VLANMAP3 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=0)
    if retval != 0:
        print "VLANMAP1 update Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapThree',update_id=0)
    if retval != 0:
        print "VLANMAP3 update Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapTwo',no_vlan=1)
    if retval != 0:
        print "VLANMAP2 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapFour',no_vlan=1)
    if retval != 0:
        print "VLANMAP2 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerFirst',position=0,no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP2 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapFour','ControllerSecond',position=0,no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP2 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapTwo',update_id=1)
    if retval != 0:
        print "VLANMAP2 upadte Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapFour',update_id=1)
    if retval != 0:
        print "VLANMAP2 upadte Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
    if retval != 0:
        print "VLANMAP1 Delete Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapTwo',no_vlan=1)
    if retval != 0:
        print "VLANMAP2 Delete Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapThree',no_vlan=0)
    if retval != 0:
        print "VLANMAP3 Delete Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapFour',no_vlan=1)
    if retval != 0:
        print "VLANMAP4 Delete Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=0)
    if retval != 0:
        print "After Delete VLANMAP1 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerFirst',presence="no",position=1,no_vlan_id=1)
    if retval != 0:
        print "After Delete VLANMAP2 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapThree','ControllerSecond',presence="no",position=0,no_vlan_id=0)
    if retval != 0:
        print "After Delete VLANMAP3 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapFour','ControllerSecond',presence="no",position=0,no_vlan_id=1)
    if retval != 0:
        print "After Delete VLANMAP4 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "After Delete VBROne Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "After Delete VBRTwo Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER1"
    retval=controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER1 delete failed"
        exit(1)

    print "DELETE CONTROLLER2"
    retval=controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER2 delete failed"
        exit(1)

    print "VTN->VBR->TWO VLANMAP with multi_controller TEST SUCCESS"
def test_vtn_vbr_vlanmap_multi_controller():

    print "TEST 1 : VTenant with one VBridge one VLANMAP without vlan_id and logicalport_id with multi-controller"
    print "CREATE Controller1"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 1 :Controller Create Failed"
        exit(1)
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    print "CREATE Controller2"
    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "TEST 1 :Controller Create Failed"
        exit(1)
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
    if retval != 0:
        print "VLANMAP Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=0)
    if retval != 0:
        print "VLANMAP Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=0)
    if retval != 0:
        print "After Create VLANMAP Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',no_vlan_id=0)
    if retval != 0:
        print "After Create VLANMAP Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=0)
    if retval != 0:
        print "VLANMAP update Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapTwo',update_id=0)
    if retval != 0:
        print "VLANMAP update Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=0)
    if retval != 0:
        print "After update VLANMAP Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',no_vlan_id=0)
    if retval != 0:
        print "After update VLANMAP Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
    if retval != 0:
        print "VLANMAP Delete Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=0)
    if retval != 0:
        print "VLANMAP Delete Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=0)
    if retval != 0:
        print "After Delete VLANMAP Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerSecond',presence="no",position=0,no_vlan_id=0)
    if retval != 0:
        print "After Delete VLANMAP Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "After Delete VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "After Delete VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER1"
    retval=controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)

    print "DELETE CONTROLLER2"
    retval=controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN->VBR->VLANMAP no vlan_id with multi-controller TEST SUCCESS"
def test_vtn_vbr_multi_vlanmap_multi_controller():

    print "TEST 3 : VTenant with one VBridge two VLANMAP with multi-controller"
    print "CREATE Controller1"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 3 :Controller1 Create Failed"
        exit(1)
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    print "CREATE Controller2"
    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "TEST 3 :Controller2 Create Failed"
        exit(1)
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBROne Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBRTwo Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
    if retval != 0:
        print "VLANMAP1 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapThree',no_vlan=0)
    if retval != 0:
        print "VLANMAP3 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',position=0,no_vlan_id=0)
    if retval != 0:
        print "After Create VLANMAP1 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapThree','ControllerSecond',position=0,no_vlan_id=0)
    if retval != 0:
        print "After Create VLANMAP3 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=0)
    if retval != 0:
        print "VLANMAP1 update Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapThree',update_id=0)
    if retval != 0:
        print "VLANMAP3 update Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrOne','VlanmapOne','ControllerFirst',position=0,no_vlan_id=0)
    if retval != 0:
        print "After update VLANMAP Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrThree','VlanmapThree','ControllerSecond',position=0,no_vlan_id=0)
    if retval != 0:
        print "After update VLANMAP Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapTwo',no_vlan=1)
    if retval != 0:
        print "VLANMAP2 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapFour',no_vlan=1)
    if retval != 0:
        print "VLANMAP2 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerFirst',position=1,no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP2 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapFour','ControllerSecond',position=1,no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP2 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapTwo',update_id=1)
    if retval != 0:
        print "VLANMAP2 upadte Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapFour',update_id=1)
    if retval != 0:
        print "VLANMAP2 upadte Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrOne','VlanmapTwo','ControllerFirst',position=1,no_vlan_id=1)
    if retval != 0:
        print "After update VLANMAP2 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_update('VtnOne','VbrThree','VlanmapFour','ControllerSecond',position=1,no_vlan_id=1)
    if retval != 0:
        print "After update VLANMAP2 Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
    if retval != 0:
        print "VLANMAP1 Delete Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapTwo',no_vlan=1)
    if retval != 0:
        print "VLANMAP2 Delete Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapThree',no_vlan=0)
    if retval != 0:
        print "VLANMAP3 Delete Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapFour',no_vlan=1)
    if retval != 0:
        print "VLANMAP4 Delete Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=0)
    if retval != 0:
        print "After Delete VLANMAP1 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerFirst',presence="no",position=1,no_vlan_id=1)
    if retval != 0:
        print "After Delete VLANMAP2 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapThree','ControllerSecond',presence="no",position=0,no_vlan_id=0)
    if retval != 0:
        print "After Delete VLANMAP3 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapFour','ControllerSecond',presence="no",position=1,no_vlan_id=1)
    if retval != 0:
        print "After Delete VLANMAP4 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "After Delete VBROne Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "After Delete VBRTwo Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER1"
    retval=controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER1 delete failed"
        exit(1)

    print "DELETE CONTROLLER2"
    retval=controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER2 delete failed"
        exit(1)

    print "VTN->VBR->TWO VLANMAP with multi_controller TEST SUCCESS"
Esempio n. 11
0
def test_multi_vtn_with_vbr_audit_test():

    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)

    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    print "TEST 6 : 2 Tenants with one VBridge each and test AUDIT"
    print "VTNONE->VBRONE"
    print "VTNTWO->VBRONE"

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnTwo')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnTwo','VbrOne','ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',position=0)
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnTwo','ControllerFirst',position=1)
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnTwo','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
        print "controller invalid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnTwo','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
        print "controller valid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)


    retval =  vtn_vbr.validate_vbr_at_controller('VtnTwo','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnTwo','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)


    retval = vtn_vbr.delete_vtn('VtnTwo')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)

    print "MULTI VTN->VBR AUDIT TEST SUCCESS"
Esempio n. 12
0
def test_vtn_vbr_audit_1():

    print "****CREATE Controller with valid IP****"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)

    print """TEST 1 : create VTN and VBR when controller is up
             change the controller status to down delete VTN and VBR
             trigger Audit"""
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    print "****Create VTN****"
    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    print "****Create VBR****"
    retval = vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)


    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)


    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
        print "controller invalid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    print "****Delete VBR****"
    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    print "****Delete VTN****"
    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
        print "controller valid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)


    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN->VBR AUDIT TEST SUCCESS"
Esempio n. 13
0
def negative_vbrif_flowfilter_out():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 1 : VBRIF->Negative test scenario FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VBR Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut', presence='yes', position=0)
  if retval != 0:
    print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst', 'FlowfilterOneOut', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrThree', 'VbrIfThree')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrThree','VbrIfThree');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowfilter.update_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut', 'NegativeFlowfilterOne')
  if retval != 0:

    print "VBRFIFlowFilterEntry Negative test case DSCP,Priority  Failed"
    print "Because  DSCP range was up to (0-63) and priority range (0-7) its more than higher its showing Bad command so test failed "
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut|NegativeFlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print retval
    print "VBRFIFlowFilterEntry Updatation Validate Failed at Co-ordinator"
    exit(1)

  retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
  if retval != 0:
    print "VBRFlowFilterEntry deletete Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOneOut')
  if retval != 0:
    print "VBRFlowFilter deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
  if retval != 0:
    print "FlowilistEntry deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlist('FlowlistOne')
  if retval != 0:
    print "Flowilist deletete Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst', 'FlowfilterOneOut', presence='no', position=0)
  if retval != 0:
    print "FlowFilter validation Failed after deleting"
    exit(1)

  retval=vtn_vbr.delete_vtn('VtnOne')
  if retval != 0:
    print "DELETE VTN Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  print "DELETE CONTROLLER"
  retval=controller.delete_controller_ex('ControllerFirst')
  if retval != 0:
     print "CONTROLLER delete failed"
     exit(1)
  print "VBR->UPDATE FLOWFILTER TEST SUCCESS"
Esempio n. 14
0
def test_vtn_vbr_multi_vlanmap():

    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        exit(1)

    print "TEST 3 : VTenant with one VBridge two VLANMAP"
  # Delay for AUDIT
    time.sleep(15)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval=create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
    if retval != 0:
        print "VLANMAP1 Create Failed"
        exit(1)

    retval=validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',position=0,no_vlan_id=0)
    if retval != 0:
        print "After Create VLANMAP1 Validate Failed"
        exit(1)

    retval=update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=0)
    if retval != 0:
        print "VLANMAP update Failed"
        exit(1)

    retval=create_vlanmap('VtnOne','VbrOne','VlanmapTwo',no_vlan=1)
    if retval != 0:
        print "VLANMAP2 Create Failed"
        exit(1)


    retval=validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerFirst',position=0,no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP2 Validate Failed"
        exit(1)

    retval=update_vlanmap('VtnOne','VbrOne','VlanmapTwo',update_id=1)
    if retval != 0:
        print "VLANMAP2 upadte Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
    if retval != 0:
        print "VLANMAP1 Delete Failed"
        exit(1)

    retval = delete_vlanmap('VtnOne','VbrOne','VlanmapTwo',no_vlan=1)
    if retval != 0:
        print "VLANMAP2 Delete Failed"
        exit(1)

    retval=validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=0)
    if retval != 0:
        print "After Delete VLANMAP1 Validate Failed"
        exit(1)

    retval=validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=0)
    if retval != 0:
        print "After Delete VLANMAP2 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "After Delete VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval=controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN->VBR->TWO VLANMAP TEST SUCCESS"
Esempio n. 15
0
def update_vbr_flowlist():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print 'TEST 3 : VBR->FLOWLISTTEST:Update the VbrFlowListEntry'
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)
  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)
  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)
  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)
  retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes");
  if retval != 0:
     print "Portmap Validate Failed"
     exit(1)

  retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst',presence="yes");
  if retval != 0:
     print "Portmap Validate Failed"
     exit(1)
  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence="yes", position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)


  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)

  retval=flowlistentry.update_flowlist_entry('FlowlistOne', 'UpdateFlowlistentryOne')
  if retval != 0:
    print "VBRFlowListEntry Update Failed"
    exit(1)
#  retval=flowlistentry.validate_flowlist_entry('FlowlistOne', 'UpdateFlowlistentryOne','ControllerFirst', presence='yes', position=0)
#  if retval != 0:
#    print "VBRFlowListEntry Updatation Validate Failed at Co-ordinator"
#    exit(1)

  retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilterEntry deletete Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilter deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
  if retval != 0:
    print "FlowilistEntry deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlist('FlowlistOne')
  if retval != 0:
    print "Flowilist deletete Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrTwo', 'ControllerFirst', 'FlowfilterOne', presence='no', position=0)
  if retval != 0:
    print "FlowFilter validation Failed after deleting"
    exit(1)

  retval=flowlistentry.validate_flowlist_at_controller('FlowlistOne', 'ControllerFirst', presence='no', position=0)
  if retval != 0:
    print "Flowlist validation Failed after deleting"
    exit(1)

#  retval=flowlistentry.validate_flowlist_entry('FlowlistOne', 'UpdateFlowlistentryOne','ControllerFirst', presence='no', position=0)
#  if retval != 0:
#    print "VBRFlowListEntry Delete Validate Failed at Co-ordinator"
#    exit(1)

  retval=vtn_vbr.delete_vtn('VtnOne')
  if retval != 0:
    print "DELETE VTN Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  print "DELETE CONTROLLER"
  retval=controller.delete_controller_ex('ControllerFirst')
  if retval != 0:
     print "CONTROLLER delete failed"
     exit(1)
  print "VBR->UPDATE FLOWLIST TEST SUCCESS"
Esempio n. 16
0
def update_vbrif_flowfilter_pass_audit():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 4 : VBRIF->Update AUDIT FLOWFILTER DROP TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  print "****UPDATE Controller IP to invalid****"
  test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
  retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
  if retval != 0:
    print "controller invalid_ip update failed"
    exit(1)
  # Delay for AUDIT
  retval = controller.wait_until_state('ControllerFirst',"down")
  if retval != 0:
    print "controller state change failed"
    exit(1)



  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)

  print "****UPDATE Controller IP to Valid****"
  test_controller_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
  retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
  if retval != 0:
    print "controller valid_ip update failed"
    exit(1)
  # Delay for AUDIT
  retval = controller.wait_until_state('ControllerFirst',"up")
  if retval != 0:
    print "controller state change failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst', 'FlowfilterOnePass', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrThree', 'VbrIfThree')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrThree','VbrIfThree');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowfilter.update_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass', 'UpdateFlowfilterOnePass')
  if retval != 0:
    print "VBRFIFlowFilterEntry Update Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst','UpdateFlowfilterOnePass', presence='yes', position=0)
  if retval != 0:
    print "VBRFIFlowFilterEntry Updatation Validate Failed at Co-ordinator"
    exit(1)

  retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilterEntry deletete Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter('VtnOne|VbrOne|VbrIfOne', 'FlowfilterOnePass')
  if retval != 0:
    print "VBRFlowFilter deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
  if retval != 0:
    print "FlowilistEntry deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlist('FlowlistOne')
  if retval != 0:
    print "Flowilist deletete Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne|VbrIfOne', 'ControllerFirst', 'FlowfilterOnePass', presence='no', position=0)
  if retval != 0:
    print "FlowFilter validation Failed after deleting"
    exit(1)

  retval=vtn_vbr.delete_vtn('VtnOne')
  if retval != 0:
    print "DELETE VTN Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  print "DELETE CONTROLLER"
  retval=controller.delete_controller_ex('ControllerFirst')
  if retval != 0:
     print "CONTROLLER delete failed"
     exit(1)
  print "VBR->AUDIT UPDATE FLOWFILTER DROP TEST SUCCESS"
Esempio n. 17
0
def test_audit_vtn_multi_vbr_vbrif():
    print "CREATE Controller"
    print "VTNONE->VBRONE->VBRIFONE/VBRIFTHREE"
    print "VTNONE->VBRTWO->VBRIFTWO/VBRIFFOUR"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        exit(1)

    print "TEST 3 : Audit One vtn and Two VBridges with Two Interfaces each"
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
    if retval != 0:
        print "VBR2 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF1 Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',position=0)
    if retval != 0:
        print "VBRIF1 Validate Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfOne')
    if retval != 0:
        print "VBR2->VBRIF1 Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfOne','ControllerFirst',position=0)
    if retval != 0:
        print "VBR2->VBRIF2 Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
     print "controller invalid_ip update failed"
     exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBR1->VBRIF1 Delete Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrTwo','VbrIfOne')
    if retval != 0:
        print "VBR2->VBRIF1 Delete Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfThree')
    if retval != 0:
        print "VBRIF3 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
    if retval != 0:
        print "VBR2->VBRIF2 Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
     print "controller valid_ip update failed"
     exit(1)
   # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfThree','ControllerFirst',position=0)
    if retval != 0:
        print "VBRIF3 Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst',position=0)
    if retval != 0:
        print "VBR2->VBRIF2 Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',position=0)
    if retval != 0:
        print "VBRONE Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst',position=1)
    if retval != 0:
        print "VBRTWO Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)


    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfThree')
    if retval != 0:
        print "VBR1->VBRIF3 Delete Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no",position=0)
    if retval != 0:
        print "VBR1->VBRIF1 Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfThree','ControllerFirst',presence="no",position=0)
    if retval != 0:
        print "VBR1->VBRIF3 Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfOne','ControllerFirst',presence="no",position=0)
    if retval != 0:
        print "VBR2->VBRIF1 Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrTwo','VbrIfTwo')
    if retval != 0:
        print "VBR2->VBRIF2 Delete Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst',presence="no",position=1)
    if retval != 0:
        print "VBR2->VBRIF2 Validate Failed"
        exit(1)
    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR1/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrTwo')
    if retval != 0:
        print "VBR2/VTN Delete Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no",position=0)
    if retval != 0:
        print "VBR1/VTN Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst',presence="no",position=1)
    if retval != 0:
        print "VBR2/VTN Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval=controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN1->VBR1->VBRIF1/VBRIF3 AND VTN1->VBR2->VBRIF1/VBRIF2 AUDIT TEST SUCCESS"
def test_vbr_flowfilter_audit_1():

    print "****CREATE Controller with valid IP****"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)

    print """TEST 1 : create VTN and VBR FLOWFILTER when controller is down
             change the controller status to up trigger Audit and validate"""
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    print "****Create VTN****"
    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    print "****Create VBR****"
    retval = vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
    if retval != 0:
      print "VTN Create Failed"
      exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
    if retval != 0:
      print "VBRIF Create Failed"
      exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
    if retval != 0:
      print "VBR Validate Failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
    if retval != 0:
      print "After Create VBRIF Validate Failed"
      exit(1)

    retval=flowlistentry.create_flowlist('FlowlistOne')
    if retval != 0:
        print "FlowList Create Failed"
        exit(1)

    retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
    if retval != 0:
        print "FlowlistEntry Create Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
        print "controller invalid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
    if retval != 0:
        print "VBRFlowFilter Create Failed"
        exit(1)

    retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
    if retval != 0:
        print "VBRFlowFilterEntry Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
        print "controller valid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne', presence='yes', position=0)
    if retval != 0:
        print "VBRFlowFilterEntry Validate Failed at Co-ordinator"
        exit(1)

    retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOne', presence='yes', position=0)
    if retval != 0:
        print "FlowFilter validation Failed at Controller"
        exit(1)

    retval = flowfilter.delete_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
    if retval != 0:
       print "VBRFlowFilterEntry deletete Failed"
       exit(1)
    retval = flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
    if retval != 0:
       print "VBRFlowFilter deletete Failed"
       exit(1)

    retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
    if retval != 0:
      print "FlowilistEntry deletete Failed"
      exit(1)

    retval=flowlistentry.delete_flowlist('FlowlistOne')
    if retval != 0:
      print "Flowilist deletete Failed"
      exit(1)

    print "****Delete VTN****"
    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOne', presence='no', position=0)
    if retval != 0:
      print "FlowFilter validation Failed after deleting"
      exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
      print "VTN Validate Failed"
      exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VBR->FLOWFILTER AUDIT_1 TEST SUCCESS"
Esempio n. 19
0
def test_audit_vtn_vbr_vbrif_portmap():

    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 4 :Controller Create Failed"
        exit(1)

    print "TEST 4 : Test Audit with VTenant one VBridge one VBRIF and One PORTMAP"
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)
    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
     print "controller invalid_ip update failed"
     exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "Portmap Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
     print "controller valid_ip update failed"
     exit(1)
   # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes");
    if retval != 0:
        print "Portmap Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval=vbrif_portmap.delete_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "Portmap Delete Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no");
    if retval != 0:
        print "After Delete Portmap Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF Delete Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no",position=0)
    if retval != 0:
        print "After Delete VBRIF Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "After Delete VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval=controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN->VBR->VBRIF->PORTMAP AUDIT TEST SUCCESS"
Esempio n. 20
0
def test_vtn_vbr_vlanmap_lg_id():

    print "CREATE Controller"
    retval = controller.add_controller_ex("ControllerFirst")
    if retval != 0:
        print "TEST 5 :Controller Create Failed"
        exit(1)

    print "TEST 5 : VTenant with one VBridge one VLANMAP no_vlan_id and logicalport_id"
    # Delay for AUDIT
    time.sleep(15)
    retval = vtn_vbr.create_vtn("VtnOne")
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr("VtnOne", "VbrOne", "ControllerFirst")
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval = create_vlanmap("VtnOne", "VbrOne", "VlanmapOne", no_vlan=4)
    if retval != 0:
        print "VLANMAP Create Failed"
        exit(1)

    retval = validate_vlanmap_at_controller("VtnOne", "VbrOne", "VlanmapOne", "ControllerFirst", no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP Validate Failed"
        exit(1)

    retval = update_vlanmap("VtnOne", "VbrOne", "VlanmapOne", update_id=1)
    if retval != 0:
        print "VLANMAP upadte Failed"
        exit(1)

    retval = validate_vlanmap_update("VtnOne", "VbrOne", "VlanmapOne", "ControllerFirst", no_vlan_id=1)
    if retval != 0:
        print "After update VLANMAP Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller("VtnOne", "VbrOne", "ControllerFirst")
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller("VtnOne", "ControllerFirst")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = delete_vlanmap("VtnOne", "VbrOne", "VlanmapOne", no_vlan=1)
    if retval != 0:
        print "VLANMAP Delete Failed"
        exit(1)

    retval = validate_vlanmap_at_controller(
        "VtnOne", "VbrOne", "VlanmapOne", "ControllerFirst", presence="no", position=0, no_vlan_id=1
    )
    if retval != 0:
        print "After Delete VLANMAP Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr("VtnOne", "VbrOne")
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller("VtnOne", "VbrOne", "ControllerFirst", presence="no")
    if retval != 0:
        print "After Delete VBR Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller("VtnOne", "ControllerFirst", presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval = vtn_vbr.delete_vtn("VtnOne")
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex("ControllerFirst")
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN->VBR->VLANMAP with no_vlan_id and logicalport_id TEST SUCCESS"
Esempio n. 21
0
def test_audit_vtn_vbr_multi_vbrif_portmap():
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 6 :Controller Create Failed"
        exit(1)

    print "TEST 6 : VTenant with one VBridge Two VBRIF1/VBRIF2 and One PORTMAP in VBRIF1"
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF1 Create Failed"
        exit(1)

    retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfTwo')
    if retval != 0:
        print "VBRIF2 Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',position=0)
    if retval != 0:
        print "After Create VBRIF1 Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfTwo','ControllerFirst',position=1)
    if retval != 0:
        print "After Create VBRIF2 Validate Failed"
        exit(1)

    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="yes",position=0);
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
     print "controller invalid_ip update failed"
     exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.delete_portmap('VtnOne','VbrOne','VbrIfOne');
    if retval != 0:
        print "Portmap Delete Failed"
        exit(1)

    retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfTwo');
    if retval != 0:
        print "VBRIF2 Portmap Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr=vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval=controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
     print "controller valid_ip update failed"
     exit(1)
   # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "controller state change failed"
      exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfTwo','ControllerFirst',presence="yes",position=0);
    if retval != 0:
        print "VBRIF2 Portmap Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',position=0)
    if retval != 0:
        print "After Create VBR1 Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval=vbrif_portmap.delete_portmap('VtnOne','VbrOne','VbrIfTwo');
    if retval != 0:
        print "Portmap Delete Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no",position=0);
    if retval != 0:
        print "After Delete VBRIF1 Portmap Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfOne')
    if retval != 0:
        print "VBRIF1 Delete Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne','VbrOne','VbrIfTwo')
    if retval != 0:
        print "VBRIF2 Delete Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst',presence="no",position=0)
    if retval != 0:
        print "After Delete VBRIF1 Validate Failed"
        exit(1)

    retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfTwo','ControllerFirst',presence="no",position=1)
    if retval != 0:
        print "After Delete VBRIF2 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "After Delete VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval=controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN1->VBR1->VBRIF1->PORTMAP(DELETE) AND VTN1->VBR1->VBRIF2->PORTMAP(CREATE) AUDIT TEST SUCCESS"
Esempio n. 22
0
def negative_vtn_flowfilter():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)
  print "NEGATIVE FLOWFILTER TEST"
  print "TEST 3 : VTN->Negative FLOWFILTER TEST "
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne', 'VTNFlowfilterOne')
  if retval != 0:
    print "VTNFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne', 'VTNFlowfilterOne')
  if retval != 0:
    print "VTNFlowFilterEntry Create Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne', 'VTNFlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "VTNFlowFilterEntry Validate Failed at Co-ordinator"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne', 'ControllerFirst', 'VTNFlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation Failed"
    exit(1)

  retval=flowfilter.update_flowfilter_entry('VtnOne', 'VTNFlowfilterOne', 'NegativeVTNFlowfilter')
  if retval != 0:
    print "VTNFlowFilterEntry Negative test case  Failed at priority and dscp "
    print "Because at priority range up to 63 and dscp range up to 7 its more than its showing bad request so test has faild"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne', 'VTNFlowfilterOne|NegativeVTNFlowfilter', presence='yes', position=0)
  if retval != 0:
    print "VTNFlowFilterEntry Updatation Validate Failed at Co-ordinator"
    exit(1)

  retval=flowfilter.delete_flowfilter_entry('VtnOne', 'VTNFlowfilterOne')
  if retval != 0:
    print "VTNFlowFilterEntry deletete Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter('VtnOne', 'VTNFlowfilterOne')
  if retval != 0:
    print "VTNFlowFilter deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
  if retval != 0:
    print "FlowilistEntry deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlist('FlowlistOne')
  if retval != 0:
    print "Flowilist deletete Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne', 'ControllerFirst', 'VTNFlowfilterOne', presence='no', position=0)
  if retval != 0:
    print "FlowFilter validation Failed after deleting"
    exit(1)

  retval=vtn_vbr.delete_vtn('VtnOne')
  if retval != 0:
    print "DELETE VTN Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  print "DELETE CONTROLLER"
  retval=controller.delete_controller_ex('ControllerFirst')
  if retval != 0:
     print "CONTROLLER delete failed"
     exit(1)
  print "VTN->UPDATE FLOWFILTER TEST SUCCESS"
def test_vtermif_flowfilter_drop_audit():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 5 : VTERMIF->AUDIT FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval = vtn_vterm.create_vterm('VtnOne','VTermOne','ControllerFirst')
  if retval != 0:
    print "VTERM Create Failed"
    exit(1)

  retval = vtermif_portmap.create_vtermif('VtnOne','VTermOne','VTermIfOne')
  if retval != 0:
    print "VTERMIF Create Failed"
    exit(1)
    retval=flowlistentry.create_flowlist('FlowlistOne')

  retval = vtermif_portmap.create_portmap('VtnOne','VTermOne','VTermIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VTERMFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VTERMFlowFilterEntry Create Failed"
    exit(1)
  print "****UPDATE Controller IP to invalid****"
  test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
  retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
  if retval != 0:
    print "controller invalid_ip update failed"
    exit(1)
  # Delay for AUDIT
  retval = controller.wait_until_state('ControllerFirst',"down")
  if retval != 0:
    print "controller state change failed"
    exit(1)

  retval=flowfilter.delete_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VTERMFlowFilterEntry deletete Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VTERMFlowFilter deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
  if retval != 0:
    print "FlowilistEntry deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlist('FlowlistOne')
  if retval != 0:
    print "Flowilist deletete Failed"
    exit(1)


  retval=vtn_vbr.delete_vtn('VtnOne')
  if retval != 0:
    print "DELETE VTN Failed"
    exit(1)


  print "DELETE CONTROLLER"
  retval=controller.delete_controller_ex('ControllerFirst')
  if retval != 0:
     print "CONTROLLER delete failed"
     exit(1)
  print "VTERM->AUDIT FLOWFILTER TEST SUCCESS"
Esempio n. 24
0
def test_multi_ctr_mininet_ping():
    child = create_multicontroller_mininet_topology('MININETONE')
    if child.isalive() == True:
        print "Topology creation Success!!!"
    else:
        print "Topology creation Failed"
        mininet_test.mininet_test.close_topology(child)
        exit(1)

    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        mininet_test.close_topology(child)
        exit(1)
# Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst', "up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        mininet_test.close_topology(child)
        exit(1)
# Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond', "up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = create_boundary('BOUNDARY', 'ControllerFirst', 'ControllerSecond')
    if retval != 0:
        print "Boundary  Create Failed"
        mininet_test.close_topology(child)
        exit(1)
    retval = validate_boundary('BOUNDARY', presence="yes", position=0)
    if retval != 0:
        print "Boundary  Validate  Failed after create"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerSecond')
    if retval != 0:
        print "VBRTWO Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
    if retval != 0:
        print "VBRIFONE Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
                                                        'VbrOne',
                                                        'MultiCtrVbrIfOne',
                                                        'ControllerFirst',
                                                        position=0)
    if retval != 0:
        print "VBRIFONE Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
    if retval != 0:
        print "VBRIFONE Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
                                                        'VbrOne',
                                                        'VbrIfTwo',
                                                        'ControllerFirst',
                                                        position=1)
    if retval != 0:
        print "VBRIFTWO Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne',
                                          'VbrOne',
                                          'MultiCtrVbrIfOne',
                                          vlan_tagged=0)
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller(
        'VtnOne',
        'VbrOne',
        'MultiCtrVbrIfOne',
        'ControllerFirst',
        presence="yes")
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo',
                                        'MultiCtrVbrIfThree')
    if retval != 0:
        print "VBRIFTHREE Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
                                                        'VbrTwo',
                                                        'MultiCtrVbrIfThree',
                                                        'ControllerSecond',
                                                        position=0)
    if retval != 0:
        print "VBRIFTHREE Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'VbrIfFour')
    if retval != 0:
        print "VBRIFFOUR Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
                                                        'VbrTwo',
                                                        'VbrIfFour',
                                                        'ControllerSecond',
                                                        position=0)
    if retval != 0:
        print "VBRIFFOUR Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne',
                                          'VbrTwo',
                                          'MultiCtrVbrIfThree',
                                          vlan_tagged=0)
    if retval != 0:
        print "VBRIF3 Portmap Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller(
        'VtnOne',
        'VbrTwo',
        'MultiCtrVbrIfThree',
        'ControllerSecond',
        presence="yes")
    if retval != 0:
        print "VBRIF3 Portmap Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = create_vlink('VLINK', 'BOUNDARY', 'VtnOne')
    if retval != 0:
        print "Vlink create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = validate_vlink('VLINK', 'VtnOne', presence="yes", position=0)
    if retval != 0:
        print "Vlink validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = mininet_test.ping_mininet(child, 'h2', 'h6')
    if retval != 0:
        print "MININET PING FAILED"

    mininet_test.close_topology(child)

    retval = delete_vlink('VLINK', 'VtnOne')
    if retval != 0:
        print "Vlink Delete Failed"
        exit(1)

    retval = validate_vlink('VLINK', 'VtnOne', presence="no")
    if retval != 0:
        print "After Delete validate vlink Failed"
        exit(1)

    retval = delete_boundary('BOUNDARY')
    if retval != 0:
        print "Delete boundary Failed"
        exit(1)

    retval = validate_boundary('BOUNDARY', presence="no")
    if retval != 0:
        print "After Delete validate boundary Failed"
        exit(1)

    retval = vbrif_portmap.delete_portmap('VtnOne', 'VbrTwo',
                                          'MultiCtrVbrIfThree')
    if retval != 0:
        print "VBRIF3 portmap Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller(
        'VtnOne',
        'VbrTwo',
        'MultiCtrVbrIfThree',
        'ControllerSecond',
        presence="no")
    if retval != 0:
        print "After Delete VBRIF3 Portmap Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_portmap('VtnOne', 'VbrOne',
                                          'MultiCtrVbrIfOne')
    if retval != 0:
        print "VBRIF1 portmap Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller(
        'VtnOne',
        'VbrOne',
        'MultiCtrVbrIfOne',
        'ControllerFirst',
        presence="no")
    if retval != 0:
        print "After Delete VBRIF1 Portmap Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
    if retval != 0:
        print "VTN1->VBR1->VBRIF1 Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
                                                        'VbrOne',
                                                        'MultiCtrVbrIfOne',
                                                        'ControllerFirst',
                                                        presence="no")
    if retval != 0:
        print "After Delete VBRIFONE Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
    if retval != 0:
        print "VTN1->VBR1->VBRIF2 Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
                                                        'VbrOne',
                                                        'VbrIfTwo',
                                                        'ControllerFirst',
                                                        presence="no")
    if retval != 0:
        print "After Delete VBRIFTWO Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrTwo',
                                        'MultiCtrVbrIfThree')
    if retval != 0:
        print "VTN1->VBR2->VBRIF3 Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
                                                        'VbrTwo',
                                                        'MultiCtrVbrIfThree',
                                                        'ControllerSecond',
                                                        presence="no")
    if retval != 0:
        print "After Delete VBRIFTHREE Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrTwo', 'VbrIfFour')
    if retval != 0:
        print "VTN1->VBR2->VBRIF4 Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
                                                        'VbrTwo',
                                                        'VbrIfFour',
                                                        'ControllerSecond',
                                                        presence="no")
    if retval != 0:
        print "After Delete VBRIFFOUR Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne', 'VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne',
                                                'VbrOne',
                                                'ControllerFirst',
                                                presence="no")
    if retval != 0:
        print "After Delete VBR1 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne', 'VbrTwo')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne',
                                                'VbrTwo',
                                                'ControllerSecond',
                                                presence="no")
    if retval != 0:
        print "After Delete VBR2 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
                                                'ControllerFirst',
                                                presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
                                                'ControllerSecond',
                                                presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER1 delete failed"
        exit(1)

    retval = controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER2 delete failed"
        exit(1)
    print "MININET PING MULTI CONTROLLER TEST SUCCESS"
Esempio n. 25
0
def test_vtn_vbr_multi_vlanmap():

    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        exit(1)

    print "TEST 3 : VTenant with one VBridge two VLANMAP"
    # Delay for AUDIT
    time.sleep(15)
    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval = create_vlanmap('VtnOne', 'VbrOne', 'VlanmapOne', no_vlan=0)
    if retval != 0:
        print "VLANMAP1 Create Failed"
        exit(1)

    retval = validate_vlanmap_at_controller('VtnOne',
                                            'VbrOne',
                                            'VlanmapOne',
                                            'ControllerFirst',
                                            position=0,
                                            no_vlan_id=0)
    if retval != 0:
        print "After Create VLANMAP1 Validate Failed"
        exit(1)

    retval = update_vlanmap('VtnOne', 'VbrOne', 'VlanmapOne', update_id=0)
    if retval != 0:
        print "VLANMAP update Failed"
        exit(1)

    retval = create_vlanmap('VtnOne', 'VbrOne', 'VlanmapTwo', no_vlan=1)
    if retval != 0:
        print "VLANMAP2 Create Failed"
        exit(1)

    retval = validate_vlanmap_at_controller('VtnOne',
                                            'VbrOne',
                                            'VlanmapTwo',
                                            'ControllerFirst',
                                            position=0,
                                            no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP2 Validate Failed"
        exit(1)

    retval = update_vlanmap('VtnOne', 'VbrOne', 'VlanmapTwo', update_id=1)
    if retval != 0:
        print "VLANMAP2 upadte Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne',
                                                'ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = delete_vlanmap('VtnOne', 'VbrOne', 'VlanmapOne', no_vlan=0)
    if retval != 0:
        print "VLANMAP1 Delete Failed"
        exit(1)

    retval = delete_vlanmap('VtnOne', 'VbrOne', 'VlanmapTwo', no_vlan=1)
    if retval != 0:
        print "VLANMAP2 Delete Failed"
        exit(1)

    retval = validate_vlanmap_at_controller('VtnOne',
                                            'VbrOne',
                                            'VlanmapOne',
                                            'ControllerFirst',
                                            presence="no",
                                            position=0,
                                            no_vlan_id=0)
    if retval != 0:
        print "After Delete VLANMAP1 Validate Failed"
        exit(1)

    retval = validate_vlanmap_at_controller('VtnOne',
                                            'VbrOne',
                                            'VlanmapOne',
                                            'ControllerFirst',
                                            presence="no",
                                            position=0,
                                            no_vlan_id=0)
    if retval != 0:
        print "After Delete VLANMAP2 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne', 'VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne',
                                                'VbrOne',
                                                'ControllerFirst',
                                                presence="no")
    if retval != 0:
        print "After Delete VBR Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
                                                'ControllerFirst',
                                                presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN->VBR->TWO VLANMAP TEST SUCCESS"
Esempio n. 26
0
def test_multi_ctr_mininet_ping():
    child = create_multicontroller_mininet_topology('MININETONE')
    if child.isalive() == True :
        print "Topology creation Success!!!"
    else:
        print "Topology creation Failed"
        mininet_test.mininet_test.close_topology(child)
        exit(1)

    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        mininet_test.close_topology(child)
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "TEST 3 :Controller Create Failed"
        mininet_test.close_topology(child)
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = create_boundary('BOUNDARY', 'ControllerFirst', 'ControllerSecond')
    if retval != 0:
        print "Boundary  Create Failed"
        mininet_test.close_topology(child)
        exit(1)
    retval = validate_boundary('BOUNDARY', presence="yes", position=0)
    if retval != 0:
        print "Boundary  Validate  Failed after create"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerSecond')
    if retval != 0:
        print "VBRTWO Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
    if retval != 0:
        print "VBRIFONE Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', position=0)
    if retval != 0:
        print "VBRIFONE Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
    if retval != 0:
        print "VBRIFONE Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', position=1)
    if retval != 0:
        print "VBRIFTWO Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', vlan_tagged=0);
    if retval != 0:
        print "VBRIF1 Portmap Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', presence="yes");
    if retval != 0:
        print "VBRIF1 Portmap Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree')
    if retval != 0:
        print "VBRIFTHREE Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree', 'ControllerSecond', position=0)
    if retval != 0:
        print "VBRIFTHREE Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'VbrIfFour')
    if retval != 0:
        print "VBRIFFOUR Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrTwo', 'VbrIfFour', 'ControllerSecond', position=0)
    if retval != 0:
        print "VBRIFFOUR Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.create_portmap('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree', vlan_tagged=0);
    if retval != 0:
        print "VBRIF3 Portmap Create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree', 'ControllerSecond', presence="yes");
    if retval != 0:
        print "VBRIF3 Portmap Validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = create_vlink('VLINK', 'BOUNDARY', 'VtnOne')
    if retval != 0:
        print "Vlink create Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = validate_vlink('VLINK', 'VtnOne', presence="yes", position=0)
    if retval != 0:
        print "Vlink validate Failed"
        mininet_test.close_topology(child)
        exit(1)

    retval = mininet_test.ping_mininet (child,'h2','h6')
    if retval != 0:
        print "MININET PING FAILED"

    mininet_test.close_topology(child)

    retval = delete_vlink('VLINK', 'VtnOne')
    if retval != 0:
        print "Vlink Delete Failed"
        exit(1)

    retval = validate_vlink('VLINK', 'VtnOne', presence="no")
    if retval != 0:
        print "After Delete validate vlink Failed"
        exit(1)

    retval = delete_boundary('BOUNDARY')
    if retval != 0:
        print "Delete boundary Failed"
        exit(1)

    retval = validate_boundary('BOUNDARY', presence="no")
    if retval != 0:
        print "After Delete validate boundary Failed"
        exit(1)

    retval = vbrif_portmap.delete_portmap('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree')
    if retval != 0:
        print "VBRIF3 portmap Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree', 'ControllerSecond', presence="no");
    if retval != 0:
        print "After Delete VBRIF3 Portmap Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_portmap('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
    if retval != 0:
        print "VBRIF1 portmap Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_portmap_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', presence="no");
    if retval != 0:
        print "After Delete VBRIF1 Portmap Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne')
    if retval != 0:
        print "VTN1->VBR1->VBRIF1 Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'MultiCtrVbrIfOne', 'ControllerFirst', presence="no")
    if retval != 0:
        print "After Delete VBRIFONE Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrOne', 'VbrIfTwo')
    if retval != 0:
        print "VTN1->VBR1->VBRIF2 Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrOne', 'VbrIfTwo', 'ControllerFirst', presence="no")
    if retval != 0:
        print "After Delete VBRIFTWO Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree')
    if retval != 0:
        print "VTN1->VBR2->VBRIF3 Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrTwo', 'MultiCtrVbrIfThree', 'ControllerSecond', presence="no")
    if retval != 0:
        print "After Delete VBRIFTHREE Validate Failed"
        exit(1)

    retval = vbrif_portmap.delete_vbrif('VtnOne', 'VbrTwo', 'VbrIfFour')
    if retval != 0:
        print "VTN1->VBR2->VBRIF4 Delete Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne', 'VbrTwo', 'VbrIfFour', 'ControllerSecond', presence="no")
    if retval != 0:
        print "After Delete VBRIFFOUR Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne', 'VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne', 'ControllerFirst', presence="no")
    if retval != 0:
        print "After Delete VBR1 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne', 'VbrTwo')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrTwo', 'ControllerSecond', presence="no")
    if retval != 0:
        print "After Delete VBR2 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst', presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerSecond', presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER1 delete failed"
        exit(1)

    retval = controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER2 delete failed"
        exit(1)
    print "MININET PING MULTI CONTROLLER TEST SUCCESS"
Esempio n. 27
0
def test_vtn_vbr_vlanmap_no_vlanid():

    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 6 :Controller Create Failed"
        exit(1)

    print "TEST 6 : VTenant with one VBridge one VLANMAP with vlan_id and logicalport_id"
    print "then update vlan_id to no_vlan_id"
    # Delay for AUDIT
    time.sleep(15)
    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval = create_vlanmap('VtnOne', 'VbrOne', 'VlanmapOne', no_vlan=1)
    if retval != 0:
        print "VLANMAP Create Failed"
        exit(1)

    retval = validate_vlanmap_at_controller('VtnOne',
                                            'VbrOne',
                                            'VlanmapOne',
                                            'ControllerFirst',
                                            no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP Validate Failed"
        exit(1)

    retval = update_vlanmap('VtnOne', 'VbrOne', 'VlanmapOne', update_id=2)
    if retval != 0:
        print "VLANMAP upadte Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne',
                                                'ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = delete_vlanmap('VtnOne', 'VbrOne', 'VlanmapOne', no_vlan=1)
    if retval != 0:
        print "VLANMAP Delete Failed"
        exit(1)

    retval = validate_vlanmap_at_controller('VtnOne',
                                            'VbrOne',
                                            'VlanmapOne',
                                            'ControllerFirst',
                                            presence="no",
                                            position=0,
                                            no_vlan_id=1)
    if retval != 0:
        print "After Delete VLANMAP Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne', 'VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne',
                                                'VbrOne',
                                                'ControllerFirst',
                                                presence="no")
    if retval != 0:
        print "After Delete VBR Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
                                                'ControllerFirst',
                                                presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN->VBR->VLANMAP with vlan_id->no_vlan_id TEST SUCCESS"
Esempio n. 28
0
def update_vbr_flowfilter_pass():
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)

    print 'TEST 6 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone update the VbrFlowFilterEntry to vbrthree'
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst', "up")
    if retval != 0:
        print "Controller state check Failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrOne', 'VbrIfOne')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrTwo', 'ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vbrif_portmap.create_vbrif('VtnOne', 'VbrTwo', 'VbrIfTwo')
    if retval != 0:
        print "VBRIF Create Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne',
                                                'ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller(
        'VtnOne', 'VbrOne', 'VbrIfOne', 'ControllerFirst')
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne',
                                                'VbrTwo',
                                                'ControllerFirst',
                                                presence='yes',
                                                position=1)
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval = vbrif_portmap.validate_vbrif_at_controller('VtnOne',
                                                        'VbrTwo',
                                                        'VbrIfTwo',
                                                        'ControllerFirst',
                                                        presence='yes',
                                                        position=0)
    if retval != 0:
        print "After Create VBRIF Validate Failed"
        exit(1)

    retval = flowlistentry.create_flowlist('FlowlistOne')
    if retval != 0:
        print "FlowList Create Failed"
        exit(1)

    retval = flowlistentry.create_flowlistentry('FlowlistOne',
                                                'FlowlistentryOne',
                                                'ControllerFirst')
    if retval != 0:
        print "FlowlistEntry Create Failed"
        exit(1)

    retval = flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOnePass')
    if retval != 0:
        print "VBRFlowFilter Create Failed"
        exit(1)

    retval = flowfilter.create_flowfilter_entry('VtnOne|VbrOne',
                                                'FlowfilterOnePass')
    if retval != 0:
        print "VBRFlowFilterEntry Create Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne',
                                                          'ControllerFirst',
                                                          'FlowfilterOnePass',
                                                          presence='yes',
                                                          position=0)
    if retval != 0:
        print "FlowFilter validation at Controller Failed"
        exit(1)

    retval = flowfilter.update_flowfilter_entry('VtnOne|VbrOne',
                                                'FlowfilterOnePass',
                                                'UpdateFlowfilterOnePass')
    if retval != 0:
        print "VBRFlowFilterEntry Update Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller(
        'VtnOne|VbrOne',
        'ControllerFirst',
        'UpdateFlowfilterOnePass',
        presence='yes',
        position=0)
    if retval != 0:
        print "VBRFlowFilterEntry Updatation Validate Failed at Co-ordinator"
        exit(1)

    retval = flowfilter.delete_flowfilter_entry('VtnOne|VbrOne',
                                                'FlowfilterOnePass')
    if retval != 0:
        print "VBRFlowFilterEntry deletete Failed"
        exit(1)

    retval = flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOnePass')
    if retval != 0:
        print "VBRFlowFilter deletete Failed"
        exit(1)

    retval = flowlistentry.delete_flowlistentry('FlowlistOne',
                                                'FlowlistentryOne')
    if retval != 0:
        print "FlowilistEntry deletete Failed"
        exit(1)

    retval = flowlistentry.delete_flowlist('FlowlistOne')
    if retval != 0:
        print "Flowilist deletete Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller('VtnOne|VbrTwo',
                                                          'ControllerFirst',
                                                          'FlowfilterOnePass',
                                                          presence='no',
                                                          position=0)
    if retval != 0:
        print "FlowFilter validation Failed after deleting"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "DELETE VTN Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
                                                'ControllerFirst',
                                                presence='no')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VBR->UPDATE FLOWFILTER TEST SUCCESS"
Esempio n. 29
0
def update_vtn_flowfilter():
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)

    print "TEST 2 : VTN->UPDATE FLOWFILTER TEST "
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst', "up")
    if retval != 0:
        print "Controller state check Failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne',
                                                'ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval = flowlistentry.create_flowlist('FlowlistOne')
    if retval != 0:
        print "FlowList Create Failed"
        exit(1)

    retval = flowlistentry.create_flowlistentry('FlowlistOne',
                                                'FlowlistentryOne',
                                                'ControllerFirst')
    if retval != 0:
        print "FlowlistEntry Create Failed"
        exit(1)

    retval = flowfilter.create_flowfilter('VtnOne', 'VTNFlowfilterOne')
    if retval != 0:
        print "VTNFlowFilter Create Failed"
        exit(1)

    retval = flowfilter.create_flowfilter_entry('VtnOne', 'VTNFlowfilterOne')
    if retval != 0:
        print "VTNFlowFilterEntry Create Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_entry('VtnOne',
                                                  'VTNFlowfilterOne',
                                                  presence='yes',
                                                  position=0)
    if retval != 0:
        print "VTNFlowFilterEntry Validate Failed at Co-ordinator"
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller('VtnOne',
                                                          'ControllerFirst',
                                                          'VTNFlowfilterOne',
                                                          presence='yes',
                                                          position=0)
    if retval != 0:
        print "FlowFilter validation Failed"
        exit(1)

    retval = flowfilter.update_flowfilter_entry('VtnOne', 'VTNFlowfilterOne',
                                                'UpdateVTNFlowfilter')
    if retval != 0:
        print "VTNFlowFilterEntry Update Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_entry(
        'VtnOne',
        'VTNFlowfilterOne|UpdateVTNFlowfilter',
        presence='yes',
        position=0)
    if retval != 0:
        print "VTNFlowFilterEntry Updatation Validate Failed at Co-ordinator"
        exit(1)

    retval = flowfilter.delete_flowfilter_entry('VtnOne', 'VTNFlowfilterOne')
    if retval != 0:
        print "VTNFlowFilterEntry deletete Failed"
        exit(1)

    retval = flowfilter.delete_flowfilter('VtnOne', 'VTNFlowfilterOne')
    if retval != 0:
        print "VTNFlowFilter deletete Failed"
        exit(1)

    retval = flowlistentry.delete_flowlistentry('FlowlistOne',
                                                'FlowlistentryOne')
    if retval != 0:
        print "FlowilistEntry deletete Failed"
        exit(1)

    retval = flowlistentry.delete_flowlist('FlowlistOne')
    if retval != 0:
        print "Flowilist deletete Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller('VtnOne',
                                                          'ControllerFirst',
                                                          'VTNFlowfilterOne',
                                                          presence='no',
                                                          position=0)
    if retval != 0:
        print "FlowFilter validation Failed after deleting"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "DELETE VTN Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
                                                'ControllerFirst',
                                                presence='no')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN->UPDATE FLOWFILTER TEST SUCCESS"
Esempio n. 30
0
def test_vtn_flowfilter_audit_1():

    print "****CREATE Controller with valid IP****"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)

    print """TEST 1 : create VTN FLOWFILTER when controller is up
             change the controller status to down delete VTN and VBR
             trigger Audit"""
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst', "up")
    if retval != 0:
        print "controller state change failed"
        exit(1)
    print "****Create VTN****"
    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    print "****Create VBR****"
    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne',
                                                'ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval = flowlistentry.create_flowlist('FlowlistOne')
    if retval != 0:
        print "FlowList Create Failed"
        exit(1)

    retval = flowlistentry.create_flowlistentry('FlowlistOne',
                                                'FlowlistentryOne',
                                                'ControllerFirst')
    if retval != 0:
        print "FlowlistEntry Create Failed"
        exit(1)

    retval = flowfilter.create_flowfilter('VtnOne', 'VTNFlowfilterOne')
    if retval != 0:
        print "VTNFlowFilter Create Failed"
        exit(1)

    retval = flowfilter.create_flowfilter_entry('VtnOne', 'VTNFlowfilterOne')
    if retval != 0:
        print "VTNFlowFilterEntry Create Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_entry('VtnOne',
                                                  'VTNFlowfilterOne',
                                                  presence='yes',
                                                  position=0)
    if retval != 0:
        print "VTNFlowFilterEntry Validate Failed at Co-ordinator"
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller('VtnOne',
                                                          'ControllerFirst',
                                                          'VTNFlowfilterOne',
                                                          presence='yes',
                                                          position=0)
    if retval != 0:
        print "FlowFilter validation Failed"
        exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr = vtn_testconfig.ReadValues(
        CONTROLLERDATA, 'ControllerFirst')['invalid_ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',
                                             ipaddr=test_invalid_ipaddr)
    if retval != 0:
        print "controller invalid_ip update failed"
        exit(1)
# Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst', "down")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = flowfilter.delete_flowfilter_entry('VtnOne', 'VTNFlowfilterOne')
    if retval != 0:
        print "VTNFlowFilterEntry deletete Failed"
        exit(1)

    retval = flowfilter.delete_flowfilter('VtnOne', 'VTNFlowfilterOne')
    if retval != 0:
        print "VTNFlowFilter deletete Failed"
        exit(1)

    retval = flowlistentry.delete_flowlistentry('FlowlistOne',
                                                'FlowlistentryOne')
    if retval != 0:
        print "FlowilistEntry deletete Failed"
        exit(1)

    retval = flowlistentry.delete_flowlist('FlowlistOne')
    if retval != 0:
        print "Flowilist deletete Failed"
        exit(1)

    print "****Delete VTN****"
    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr = vtn_testconfig.ReadValues(
        CONTROLLERDATA, 'ControllerFirst')['ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',
                                             ipaddr=test_controller_ipaddr)
    if retval != 0:
        print "controller valid_ip update failed"
        exit(1)

# Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst', "up")
    if retval != 0:
        print "controller state change failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller('VtnOne',
                                                          'ControllerFirst',
                                                          'VTNFlowfilterOne',
                                                          presence='no',
                                                          position=0)
    if retval != 0:
        print "FlowFilter validation Failed after deleting"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
                                                'ControllerFirst',
                                                presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN->FLOWFILTER TEST SUCCESS"
Esempio n. 31
0
def negative_vtn_flowfilter():
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)
    print "NEGATIVE FLOWFILTER TEST"
    print "TEST 3 : VTN->Negative FLOWFILTER TEST "
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst', "up")
    if retval != 0:
        print "Controller state check Failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne', 'VbrOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne', 'ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne', 'VbrOne',
                                                'ControllerFirst')
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval = flowlistentry.create_flowlist('FlowlistOne')
    if retval != 0:
        print "FlowList Create Failed"
        exit(1)

    retval = flowlistentry.create_flowlistentry('FlowlistOne',
                                                'FlowlistentryOne',
                                                'ControllerFirst')
    if retval != 0:
        print "FlowlistEntry Create Failed"
        exit(1)

    retval = flowfilter.create_flowfilter('VtnOne', 'VTNFlowfilterOne')
    if retval != 0:
        print "VTNFlowFilter Create Failed"
        exit(1)

    retval = flowfilter.create_flowfilter_entry('VtnOne', 'VTNFlowfilterOne')
    if retval != 0:
        print "VTNFlowFilterEntry Create Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_entry('VtnOne',
                                                  'VTNFlowfilterOne',
                                                  presence='yes',
                                                  position=0)
    if retval != 0:
        print "VTNFlowFilterEntry Validate Failed at Co-ordinator"
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller('VtnOne',
                                                          'ControllerFirst',
                                                          'VTNFlowfilterOne',
                                                          presence='yes',
                                                          position=0)
    if retval != 0:
        print "FlowFilter validation Failed"
        exit(1)

    retval = flowfilter.update_flowfilter_entry('VtnOne', 'VTNFlowfilterOne',
                                                'NegativeVTNFlowfilter')
    if retval != 0:
        print "VTNFlowFilterEntry Negative test case  Failed at priority and dscp "
        print "Because at priority range up to 63 and dscp range up to 7 its more than its showing bad request so test has faild"
        exit(1)

    retval = flowfilter.validate_flowfilter_entry(
        'VtnOne',
        'VTNFlowfilterOne|NegativeVTNFlowfilter',
        presence='yes',
        position=0)
    if retval != 0:
        print "VTNFlowFilterEntry Updatation Validate Failed at Co-ordinator"
        exit(1)

    retval = flowfilter.delete_flowfilter_entry('VtnOne', 'VTNFlowfilterOne')
    if retval != 0:
        print "VTNFlowFilterEntry deletete Failed"
        exit(1)

    retval = flowfilter.delete_flowfilter('VtnOne', 'VTNFlowfilterOne')
    if retval != 0:
        print "VTNFlowFilter deletete Failed"
        exit(1)

    retval = flowlistentry.delete_flowlistentry('FlowlistOne',
                                                'FlowlistentryOne')
    if retval != 0:
        print "FlowilistEntry deletete Failed"
        exit(1)

    retval = flowlistentry.delete_flowlist('FlowlistOne')
    if retval != 0:
        print "Flowilist deletete Failed"
        exit(1)

    retval = flowfilter.validate_flowfilter_at_controller('VtnOne',
                                                          'ControllerFirst',
                                                          'VTNFlowfilterOne',
                                                          presence='no',
                                                          position=0)
    if retval != 0:
        print "FlowFilter validation Failed after deleting"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "DELETE VTN Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne',
                                                'ControllerFirst',
                                                presence='no')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN->UPDATE FLOWFILTER TEST SUCCESS"
Esempio n. 32
0
def test_vtn_vbr_vlanmap_no_vlanid():

    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 6 :Controller Create Failed"
        exit(1)

    print "TEST 6 : VTenant with one VBridge one VLANMAP with vlan_id and logicalport_id"
    print           "then update vlan_id to no_vlan_id"
  # Delay for AUDIT
    time.sleep(15)
    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval=create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=1)
    if retval != 0:
        print "VLANMAP Create Failed"
        exit(1)

    retval=validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP Validate Failed"
        exit(1)

    retval=update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=2)
    if retval != 0:
        print "VLANMAP upadte Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=1)
    if retval != 0:
        print "VLANMAP Delete Failed"
        exit(1)

    retval=validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=1)
    if retval != 0:
        print "After Delete VLANMAP Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "After Delete VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval=controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN->VBR->VLANMAP with vlan_id->no_vlan_id TEST SUCCESS"
Esempio n. 33
0
def test_vtn_multi_vbr_multi_controller():
    print "TEST 2 : 1 Tenants with 2 VBridge each on different controllers"
    print "CONTROLLER1->VTNONE->VBRONE->VBRTWO"
    print "CONTROLLER2->VTNTWO->VBRTHREE->VBRFOUR"
    print "CREATE ControllerFirst"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller1 Create Failed"
        exit(1)
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    print "CREATE ControllerSecond"
    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "Controller2 Create Failed"
        exit(1)
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnTwo')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
    if retval != 0:
        print "VBR2 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnTwo','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR3 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnTwo','VbrFour','ControllerSecond')
    if retval != 0:
        print "VBR4 Create Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN1 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnTwo','ControllerSecond')
    if retval != 0:
        print "VTN2 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst',position=0)
    if retval != 0:
        print "VBR2 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnTwo','VbrThree','ControllerSecond',position=0)
    if retval != 0:
        print "VBR3 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnTwo','VbrFour','ControllerSecond')
    if retval != 0:
        print "VBR4 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR1/VTN1 Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrTwo')
    if retval != 0:
        print "VBR2/VTN1 Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnTwo','VbrThree')
    if retval != 0:
        print "VBR3/VTN2 Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnTwo','VbrFour')
    if retval != 0:
        print "VBR4/VTN2 Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VBR1/VBR1 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst',presence="no")
    if retval != 0:
        print "VBR2/VTN1 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnTwo','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "VBR3/VTN2 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnTwo','VbrFour','ControllerSecond',presence="no")
    if retval != 0:
     print "VBR4/VTN2 Validate Failed"
     exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnTwo','ControllerSecond', presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnTwo')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER1"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)

    print "DELETE CONTROLLER2"
    retval = controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)

    print "MULTI CONTROLLER MULTI VBR VTN->VBR TEST SUCCESS"
def test_vtn_vbr_vlanmap_multi_controller():

    print "TEST 1 : VTenant with one VBridge one VLANMAP without vlan_id and logicalport_id with multi-controller"
    print "CREATE Controller1"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 1 :Controller Create Failed"
        exit(1)
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    print "CREATE Controller2"
    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "TEST 1 :Controller Create Failed"
        exit(1)
    # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
    if retval != 0:
        print "VLANMAP Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=0)
    if retval != 0:
        print "VLANMAP Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=0)
    if retval != 0:
        print "After Create VLANMAP Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',no_vlan_id=0)
    if retval != 0:
        print "After Create VLANMAP Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=0)
    if retval != 0:
        print "VLANMAP update Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapTwo',update_id=0)
    if retval != 0:
        print "VLANMAP update Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=0)
    if retval != 0:
        print "VLANMAP Delete Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=0)
    if retval != 0:
        print "VLANMAP Delete Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=0)
    if retval != 0:
        print "After Delete VLANMAP Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapTwo','ControllerSecond',presence="no",position=0,no_vlan_id=0)
    if retval != 0:
        print "After Delete VLANMAP Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "After Delete VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "After Delete VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER1"
    retval=controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)

    print "DELETE CONTROLLER2"
    retval=controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)
    print "VTN->VBR->VLANMAP no vlan_id with multi-controller TEST SUCCESS"
Esempio n. 35
0
def test_vtn_vbr_multi_controller():
    print "TEST 1 : 1 Tenants with 1 VBridge each on different controllers"
    print "CONTROLLER1->VTNONE->VBRONE"
    print "CONTROLLER2->VTNONE->VBRTWO"
    print "CREATE ControllerFirst"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    print "CREATE ControllerSecond"
    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "Controller Create Failed"
        exit(1)
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR Create Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',position=0)
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',position=0)
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBROne Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBRTwo Validate Failed"
        exit(1)

    retval  =  vtn_vbr.delete_vbr('VtnOne','VbrThree')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "VtnVBRTwo Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VtnVBR Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)


    print "DELETE CONTROLLER1"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)

    print "DELETE CONTROLLER2"
    retval=controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER delete failed"
        exit(1)

    print "MULTI CONTROLLER VTN->VBR TEST SUCCESS"
def test_vtn_vbr_vlanmap_no_vlanid_multi_controller():

    print "TEST 6 : VTenant with one VBridge one VLANMAP with vlan_id and logicalport_id"
    print                "then update vlan_id to no_vlan_id with multi-controller"
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "TEST 6 :Controller1 Create Failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "TEST 6 :Controller2 Create Failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval=vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Create Failed"
        exit(1)

    retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR3 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=1)
    if retval != 0:
        print "VLANMAP1 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.create_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=1)
    if retval != 0:
        print "VLANMAP2 Create Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP1 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',no_vlan_id=1)
    if retval != 0:
        print "After Create VLANMAP2 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrOne','VlanmapOne',update_id=2)
    if retval != 0:
        print "VLANMAP1 upadte Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.update_vlanmap('VtnOne','VbrThree','VlanmapTwo',update_id=2)
    if retval != 0:
        print "VLANMAP2 upadte Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "After Create VBR Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed at controller1"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
    if retval != 0:
        print "VTN Validate Failed at controller2"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrOne','VlanmapOne',no_vlan=1)
    if retval != 0:
        print "VLANMAP1 Delete Failed"
        exit(1)

    retval = vtn_vbr_vlanmap.delete_vlanmap('VtnOne','VbrThree','VlanmapTwo',no_vlan=1)
    if retval != 0:
        print "VLANMAP3 Delete Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrOne','VlanmapOne','ControllerFirst',presence="no",position=0,no_vlan_id=1)
    if retval != 0:
        print "After Delete VLANMAP1 Validate Failed"
        exit(1)

    retval=vtn_vbr_vlanmap.validate_vlanmap_at_controller('VtnOne','VbrThree','VlanmapTwo','ControllerSecond',presence="no",position=0,no_vlan_id=1)
    if retval != 0:
        print "After Delete VLANMAP3 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR1/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
    if retval != 0:
        print "VBR3/VTN Delete Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "After Delete VBR1 Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "After Delete VBR3 Validate Failed"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted at controller1"
        exit(1)

    retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
    if retval != 0:
        print "VTN Validate Failed after VBR Deleted at controller2"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval=controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER1 delete failed"
        exit(1)

    retval=controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER2 delete failed"
        exit(1)
    print "VTN->VBR->VLANMAP with vlan_id->no_vlan_id with multi-controller TEST SUCCESS"
Esempio n. 37
0
def test_multi_vtn_with_vbr_multi_controller():
    print "TEST 3 : 2 Tenants with one VBridge each"
    print "CONTROLLER1->VTNONE->VBRONE"
    print "CONTROLLER1->VTNTWO->VBRONE"
    print "CONTROLLER2->VTNONE->VBRONE"
    print "CONTROLLER2->VTNTWO->VBRONE"
    print "CREATE Controller"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller1 Create Failed"
        exit(1)
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "Controller2 Create Failed"
        exit(1)
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vtn('VtnTwo')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnTwo','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR2 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR3 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnTwo','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR4 Create Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',position=0)
    if retval != 0:
        print "VTN1/CONTROLLER1 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnTwo','ControllerFirst',position=0)
    if retval != 0:
        print "VTN2/CONTROLLER2 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',position=0)
    if retval != 0:
        print "VTN1/CONTROLLER2 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnTwo','ControllerSecond',position=0)
    if retval != 0:
        print "VTN2/CONTROLLER2 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1/VTN1 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnTwo','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1/VTN2 Validate Failed "
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR2/VTN1 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnTwo','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR2/VTN2 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VBR Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN1 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnTwo','VbrOne')
    if retval != 0:
        print "VBR/VTN Delete Failed"
        exit(1)

    retval=vtn_vbr.validate_vbr_at_controller('VtnTwo','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VBR2 Validate Failed"
        exit(1)

    retval = vtn_vbr.validate_vtn_at_controller('VtnTwo','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
    if retval != 0:
        print "VBR2/VTN1 Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "VBR2/VTN1 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vbr('VtnTwo','VbrThree')
    if retval != 0:
        print "VBR2/VTN2 Delete Failed"
        exit(1)

    retval = vtn_vbr.validate_vbr_at_controller('VtnTwo','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "VBR2/VTN2 Validate Failed"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    retval = vtn_vbr.delete_vtn('VtnTwo')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)

    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER1 delete failed"
        exit(1)

    retval = controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER2 delete failed"
        exit(1)

    print "MULTI VTN->VBR MULTI-CONTROLLER TEST SUCCESS"
Esempio n. 38
0
def negative_vbr_flowfilter():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)
  print "Negative test scenario test cases"
  print 'TEST 3 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone negative  the VbrFlowFilterEntry to vbrthree'
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "VBRFlowFilterEntry Validation at Co-ordinator Failed "
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrThree', 'VbrIfThree')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=flowfilter.update_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne', 'NegativeFlowfilter')
  if retval != 0:
    print "VBRFlowFilterEntry at negative  priority and dscp has  Failed"
    print "Because flowfilter priority range up 63 and dscp range up to 7 its more than test was faild its showing Bad error"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne|NegativeFlowfilter', presence='yes', position=0)
  if retval != 0:
    print "VBRFlowFilterEntry Negative  Validate Failed at Co-ordinator"
    exit(1)

  retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilterEntry deletete Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOne')
  if retval != 0:
    print "VBRFlowFilter deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
  if retval != 0:
    print "FlowilistEntry deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlist('FlowlistOne')
  if retval != 0:
    print "Flowilist deletete Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrTwo', 'ControllerFirst', 'FlowfilterOne', presence='no', position=0)
  if retval != 0:
    print "FlowFilter validation Failed after deleting"
    exit(1)

  retval=vtn_vbr.delete_vtn('VtnOne')
  if retval != 0:
    print "DELETE VTN Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  print "DELETE CONTROLLER"
  retval=controller.delete_controller_ex('ControllerFirst')
  if retval != 0:
     print "CONTROLLER delete failed"
     exit(1)
  print "VBR->UPDATE FLOWFILTER TEST SUCCESS"
def test_vtn_vbr_audit_multi_controller_2():
    print """TEST 2 : create VTN and VBR when controller is down
             change the controller status to up trigger Audit"""
    print "****CREATE Controller with valid IP****"
    retval = controller.add_controller_ex('ControllerFirst')
    if retval != 0:
        print "Controller1 Create Failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval = controller.add_controller_ex('ControllerSecond')
    if retval != 0:
        print "Controller2 Create Failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    print "****UPDATE Controller IP to invalid****"
    test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['invalid_ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_invalid_ipaddr)
    if retval != 0:
        print "controller1 invalid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"down")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    test_invalid_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerSecond')['invalid_ipaddr']
    retval = controller.update_controller_ex('ControllerSecond',ipaddr=test_invalid_ipaddr)
    if retval != 0:
        print "controller2 invalid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"down")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    print "****Create VTN****"
    retval = vtn_vbr.create_vtn('VtnOne')
    if retval != 0:
        print "VTN Create Failed"
        exit(1)

    print "****Create VBR****"
    retval = vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Create Failed"
        exit(1)

    retval = vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR3 Create Failed"
        exit(1)

    print "****UPDATE Controller IP to Valid****"
    test_controller_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerFirst')['ipaddr']
    retval = controller.update_controller_ex('ControllerFirst',ipaddr=test_controller_ipaddr)
    if retval != 0:
        print "controller1 valid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerFirst',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    test_controller_ipaddr= vtn_testconfig.ReadValues(CONTROLLERDATA,'ControllerSecond')['ipaddr']
    retval = controller.update_controller_ex('ControllerSecond',ipaddr=test_controller_ipaddr)
    if retval != 0:
        print "controller2 valid_ip update failed"
        exit(1)
  # Delay for AUDIT
    retval = controller.wait_until_state('ControllerSecond',"up")
    if retval != 0:
      print "Controller state check failed"
      exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
    if retval != 0:
        print "VTN Validate Failed at controller1"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond')
    if retval != 0:
        print "VTN Validate Failed at controller2"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
    if retval != 0:
        print "VBR1 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond')
    if retval != 0:
        print "VBR3 Validate Failed"
        exit(1)

    print "****Delete VBR****"
    retval = vtn_vbr.delete_vbr('VtnOne','VbrOne')
    if retval != 0:
        print "VBR1/VTN Delete Failed"
        exit(1)

    iretval = vtn_vbr.delete_vbr('VtnOne','VbrThree')
    if retval != 0:
        print "VBR3/VTN Delete Failed"
        exit(1)

    print "****Delete VTN****"
    retval = vtn_vbr.delete_vtn('VtnOne')
    if retval != 0:
        print "VTN Delete Failed in coordinator"
        exit(1)


    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VBR1 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vbr_at_controller('VtnOne','VbrThree','ControllerSecond',presence="no")
    if retval != 0:
        print "VBR3 Validate Failed"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst',presence="no")
    if retval != 0:
        print "VTN Validate Failed at controller1"
        exit(1)

    retval =  vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerSecond',presence="no")
    if retval != 0:
        print "VTN Validate Failed at controller2"
        exit(1)


    print "DELETE CONTROLLER"
    retval = controller.delete_controller_ex('ControllerFirst')
    if retval != 0:
        print "CONTROLLER1 delete failed"
        exit(1)

    retval = controller.delete_controller_ex('ControllerSecond')
    if retval != 0:
        print "CONTROLLER2 delete failed"
        exit(1)

    print "VTN->VBR Multi-controller AUDIT TEST SUCCESS"
Esempio n. 40
0
def update_vbr_flowfilter_drop():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print 'TEST 8 : VBR->FLOWFILTER TEST: Create Three VBR and VbrFlowFilterEntry with vbrone update the VbrFlowFilterEntry to vbrthree'
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrTwo','ControllerFirst', presence = 'yes', position = 1)
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrTwo','VbrIfTwo','ControllerFirst', presence = 'yes', position = 0)
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VbrOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VBRFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VBRFlowFilterEntry Create Failed"
    exit(1)


  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst', 'FlowfilterOneDrop', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)


  retval=flowfilter.update_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOneDrop', 'UpdateFlowfilterOneDrop')
  if retval != 0:
    print "VBRFlowFilterEntry Update Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrOne', 'ControllerFirst','UpdateFlowfilterOneDrop', presence='yes', position=0)
  if retval != 0:
    print "VBRFlowFilterEntry Updatation Validate Failed at Co-ordinator"
    exit(1)

  retval=flowfilter.delete_flowfilter_entry('VtnOne|VbrOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VBRFlowFilterEntry deletete Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter('VtnOne|VbrOne', 'FlowfilterOneDrop')
  if retval != 0:
    print "VBRFlowFilter deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
  if retval != 0:
    print "FlowilistEntry deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlist('FlowlistOne')
  if retval != 0:
    print "Flowilist deletete Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VbrTwo', 'ControllerFirst', 'FlowfilterOneDrop', presence='no', position=0)
  if retval != 0:
    print "FlowFilter validation Failed after deleting"
    exit(1)

  retval=vtn_vbr.delete_vtn('VtnOne')
  if retval != 0:
    print "DELETE VTN Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  print "DELETE CONTROLLER"
  retval=controller.delete_controller_ex('ControllerFirst')
  if retval != 0:
     print "CONTROLLER delete failed"
     exit(1)
  print "VBR->UPDATE FLOWFILTER TEST SUCCESS"
def test_vtermif_flowfilter_1():
  print "CREATE Controller"
  retval = controller.add_controller_ex('ControllerFirst')
  if retval != 0:
    print "Controller Create Failed"
    exit(1)

  print "TEST 2 : VTERMIF->FLOWFILTER TEST"
  # Delay for AUDIT
  retval=controller.wait_until_state('ControllerFirst', "up")
  if retval != 0:
    print "Controller state check Failed"
    exit(1)

  retval=vtn_vbr.create_vtn('VtnOne')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrOne','VbrIfOne')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrTwo','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrTwo','VbrIfTwo')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.create_vbr('VtnOne','VbrThree','ControllerFirst')
  if retval != 0:
    print "VTN Create Failed"
    exit(1)

  retval=vbrif_portmap.create_vbrif('VtnOne','VbrThree','VbrIfThree')
  if retval != 0:
    print "VBRIF Create Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  retval=vtn_vbr.validate_vbr_at_controller('VtnOne','VbrOne','ControllerFirst')
  if retval != 0:
    print "VBR Validate Failed"
    exit(1)

  retval=vbrif_portmap.validate_vbrif_at_controller('VtnOne','VbrOne','VbrIfOne','ControllerFirst')
  if retval != 0:
    print "After Create VBRIF Validate Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrOne','VbrIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrTwo','VbrIfTwo');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=vbrif_portmap.create_portmap('VtnOne','VbrThree','VbrIfThree');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval = vtn_vterm.create_vterm('VtnOne','VTermOne','ControllerFirst')
  if retval != 0:
    print "VTERM Create Failed"
    exit(1)

  retval = vtermif_portmap.create_vtermif('VtnOne','VTermOne','VTermIfOne')
  if retval != 0:
    print "VTERMIF Create Failed"
    exit(1)
    retval=flowlistentry.create_flowlist('FlowlistOne')

  retval = vtermif_portmap.create_portmap('VtnOne','VTermOne','VTermIfOne');
  if retval != 0:
    print "Portmap Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlist('FlowlistOne')
  if retval != 0:
    print "FlowList Create Failed"
    exit(1)

  retval=flowlistentry.create_flowlistentry('FlowlistOne', 'FlowlistentryOne','ControllerFirst')
  if retval != 0:
    print "FlowlistEntry Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne')
  if retval != 0:
    print "VTERMFlowFilter Create Failed"
    exit(1)

  retval=flowfilter.create_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne')
  if retval != 0:
    print "VTERMFlowFilterEntry Create Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "VTERMFlowFilterEntry Validation at Co-ordinator Failed "
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'ControllerFirst', 'FlowfilterOne', presence='yes', position=0)
  if retval != 0:
    print "FlowFilter validation at Controller Failed"
    exit(1)

  retval=flowfilter.update_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne', 'UpdateFlowfilter')
  if retval != 0:
    print "VTERMIFFlowFilterEntry Update Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne|UpdateFlowfilter', presence='yes', position=0)
  if retval != 0:
    print "VTERMIFFlowFilterEntry Updatation Validate Failed at Co-ordinator"
    exit(1)

  retval=flowfilter.delete_flowfilter_entry('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne')
  if retval != 0:
    print "VTERMFlowFilterEntry deletete Failed"
    exit(1)

  retval=flowfilter.delete_flowfilter('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'FlowfilterOne')
  if retval != 0:
    print "VTERMFlowFilter deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlistentry('FlowlistOne', 'FlowlistentryOne')
  if retval != 0:
    print "FlowilistEntry deletete Failed"
    exit(1)

  retval=flowlistentry.delete_flowlist('FlowlistOne')
  if retval != 0:
    print "Flowilist deletete Failed"
    exit(1)

  retval=flowfilter.validate_flowfilter_at_controller('VtnOne|VTermOne|VbrIfOne|VTermIfOne', 'ControllerFirst', 'FlowfilterOne', presence='no', position=0)
  if retval != 0:
    print "FlowFilter validation Failed after deleting"
    exit(1)

  retval=vtn_vbr.delete_vtn('VtnOne')
  if retval != 0:
    print "DELETE VTN Failed"
    exit(1)

  retval=vtn_vbr.validate_vtn_at_controller('VtnOne','ControllerFirst', presence='no')
  if retval != 0:
    print "VTN Validate Failed"
    exit(1)

  print "DELETE CONTROLLER"
  retval=controller.delete_controller_ex('ControllerFirst')
  if retval != 0:
     print "CONTROLLER delete failed"
     exit(1)
  print "VTERMIF->FLOWFILTER TEST SUCCESS"