def do_install_disk(cls, disk, disk_name, cr, workdir, oe_builddir,
bootimg_dir, kernel_dir, native_sysroot):
"""
Called after all partitions have been prepared and assembled into a
disk image. In this case, we insert/modify the MBR using isohybrid
utility for booting via BIOS from disk storage devices.
"""
full_path = cr._full_path(workdir, disk_name, "direct")
iso_img = "%s.p1" % full_path
full_path_iso = cr._full_path(workdir, disk_name, "iso")
isohybrid_cmd = "isohybrid -u %s" % iso_img
msger.debug("running command: %s" % \
isohybrid_cmd)
exec_native_cmd(isohybrid_cmd, native_sysroot)
# Replace the image created by direct plugin with the one created by
# mkisofs command. This is necessary because the iso image created by
# mkisofs has a very specific MBR is system area of the ISO image, and
# direct plugin adds and configures an another MBR.
msger.debug("Replaceing the image created by direct plugin\n")
os.remove(full_path)
shutil.copy2(iso_img, full_path_iso)
shutil.copy2(full_path_iso, full_path)
# Remove temporary ISO file
os.remove(iso_img)
def prepare_rootfs_btrfs(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a btrfs rootfs partition.
Currently handles ext2/3/4 and btrfs.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
extra_blocks = self.get_extra_block_count(actual_rootfs_size)
if extra_blocks < self.extra_space:
extra_blocks = self.extra_space
rootfs_size = actual_rootfs_size + extra_blocks
rootfs_size *= self.overhead_factor
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, self.mountpoint, rootfs_size))
dd_cmd = "dd if=/dev/zero of=%s bs=1024 seek=%d count=0 bs=1k" % \
(rootfs, rootfs_size)
exec_cmd(dd_cmd)
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -b %d -r %s %s %s" % \
(self.fstype, rootfs_size * 1024, rootfs_dir, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def prepare_rootfs_ext(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for an ext2/3/4 rootfs partition.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
extra_blocks = self.get_extra_block_count(actual_rootfs_size)
if extra_blocks < self.extra_space:
extra_blocks = self.extra_space
rootfs_size = actual_rootfs_size + extra_blocks
rootfs_size *= self.overhead_factor
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, self.mountpoint, rootfs_size))
dd_cmd = "dd if=/dev/zero of=%s bs=1024 seek=%d count=0 bs=1k" % \
(rootfs, rootfs_size)
exec_cmd(dd_cmd)
extra_imagecmd = "-i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -F %s %s %s -d %s" % \
(self.fstype, extra_imagecmd, rootfs, label_str, rootfs_dir)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def prepare_empty_partition_squashfs(self, cr_workdir, oe_builddir,
native_sysroot):
"""
Prepare an empty squashfs partition.
"""
msger.warning("Creating of an empty squashfs %s partition was attempted. " \
"Proceeding as requested." % self.mountpoint)
path = "%s/fs_%s.%s" % (cr_workdir, self.label, self.fstype)
os.path.isfile(path) and os.remove(path)
# it is not possible to create a squashfs without source data,
# thus prepare an empty temp dir that is used as source
tmpdir = tempfile.mkdtemp()
squashfs_cmd = "mksquashfs %s %s -noappend" % \
(tmpdir, path)
exec_native_cmd(squashfs_cmd, native_sysroot)
os.rmdir(tmpdir)
# get the rootfs size in the right units for kickstart (kB)
du_cmd = "du -Lbks %s" % path
out = exec_cmd(du_cmd)
fs_size = out.split()[0]
self.size = fs_size
def finalize(self):
"""
Finalize the disk image.
For example, prepare the image to be bootable by e.g.
creating and installing a bootloader configuration.
"""
source_plugin = self.get_default_source_plugin()
if source_plugin:
self._source_methods = pluginmgr.get_source_plugin_methods(source_plugin, disk_methods)
for disk_name, disk in self.__image.disks.items():
self._source_methods["do_install_disk"](disk, disk_name, self,
self.workdir,
self.oe_builddir,
self.bootimg_dir,
self.kernel_dir,
self.native_sysroot)
for disk_name, disk in self.__image.disks.items():
full_path = self._full_path(self.__imgdir, disk_name, "direct")
# Generate .bmap
if self.bmap:
msger.debug("Generating bmap file for %s" % disk_name)
exec_native_cmd("bmaptool create %s -o %s.bmap" % (full_path, full_path),
self.native_sysroot)
# Compress the image
if self.compressor:
msger.debug("Compressing disk %s with %s" % (disk_name, self.compressor))
exec_cmd("%s %s" % (self.compressor, full_path))
def finalize(self):
"""
Finalize the disk image.
For example, prepare the image to be bootable by e.g.
creating and installing a bootloader configuration.
"""
source_plugin = self.get_default_source_plugin()
if source_plugin:
self._source_methods = pluginmgr.get_source_plugin_methods(
source_plugin, disk_methods)
for disk_name, disk in self.__image.disks.items():
self._source_methods["do_install_disk"](
disk, disk_name, self, self.workdir, self.oe_builddir,
self.bootimg_dir, self.kernel_dir, self.native_sysroot)
for disk_name, disk in self.__image.disks.items():
full_path = self._full_path(self.__imgdir, disk_name, "direct")
# Generate .bmap
if self.bmap:
msger.debug("Generating bmap file for %s" % disk_name)
exec_native_cmd(
"bmaptool create %s -o %s.bmap" % (full_path, full_path),
self.native_sysroot)
# Compress the image
if self.compressor:
msger.debug("Compressing disk %s with %s" %
(disk_name, self.compressor))
exec_cmd("%s %s" % (self.compressor, full_path))
def prepare_rootfs_vfat(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a vfat rootfs partition.
"""
du_cmd = "du -bks %s" % rootfs_dir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
extra_blocks = self.get_extra_block_count(blocks)
if extra_blocks < self.extra_space:
extra_blocks = self.extra_space
blocks += extra_blocks
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, self.mountpoint, blocks))
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
dosfs_cmd = "mkdosfs %s -S 512 -C %s %d" % (label_str, rootfs, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (rootfs, rootfs_dir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def prepare_rootfs_ext(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for an ext2/3/4 rootfs partition.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
extra_blocks = self.get_extra_block_count(actual_rootfs_size)
if extra_blocks < self.extra_space:
extra_blocks = self.extra_space
rootfs_size = actual_rootfs_size + extra_blocks
rootfs_size *= self.overhead_factor
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, self.mountpoint, rootfs_size))
exec_cmd("truncate %s -s %d" % (rootfs, rootfs_size * 1024))
extra_imagecmd = "-i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -F %s %s %s -d %s" % \
(self.fstype, extra_imagecmd, rootfs, label_str, rootfs_dir)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
mkfs_cmd = "fsck.%s -pvfD %s || [ $? -le 3 ]" % (self.fstype, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def prepare_rootfs_ext(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for an ext2/3/4 rootfs partition.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
extra_blocks = self.get_extra_block_count(actual_rootfs_size)
if extra_blocks < self.extra_space:
extra_blocks = self.extra_space
rootfs_size = actual_rootfs_size + extra_blocks
rootfs_size *= self.overhead_factor
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, self.mountpoint, rootfs_size))
with open(rootfs, 'w') as sparse:
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
extra_imagecmd = "-i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -F %s %s %s -d %s" % \
(self.fstype, extra_imagecmd, rootfs, label_str, rootfs_dir)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def prepare_rootfs_btrfs(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a btrfs rootfs partition.
Currently handles ext2/3/4 and btrfs.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
extra_blocks = self.get_extra_block_count(actual_rootfs_size)
if extra_blocks < self.extra_space:
extra_blocks = self.extra_space
rootfs_size = actual_rootfs_size + extra_blocks
rootfs_size *= self.overhead_factor
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, self.mountpoint, rootfs_size))
exec_cmd("truncate %s -s %d" % (rootfs, rootfs_size * 1024))
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -b %d -r %s %s %s" % \
(self.fstype, rootfs_size * 1024, rootfs_dir, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def do_install_disk(cls, disk, disk_name, creator, workdir, oe_builddir,
bootimg_dir, kernel_dir, native_sysroot):
"""
Called after all partitions have been prepared and assembled into a
disk image. In this case, we insert/modify the MBR using isohybrid
utility for booting via BIOS from disk storage devices.
"""
full_path = creator._full_path(workdir, disk_name, "direct")
iso_img = "%s.p1" % full_path
full_path_iso = creator._full_path(workdir, disk_name, "iso")
isohybrid_cmd = "isohybrid -u %s" % iso_img
msger.debug("running command: %s" % \
isohybrid_cmd)
exec_native_cmd(isohybrid_cmd, native_sysroot)
# Replace the image created by direct plugin with the one created by
# mkisofs command. This is necessary because the iso image created by
# mkisofs has a very specific MBR is system area of the ISO image, and
# direct plugin adds and configures an another MBR.
msger.debug("Replaceing the image created by direct plugin\n")
os.remove(full_path)
shutil.copy2(iso_img, full_path_iso)
shutil.copy2(full_path_iso, full_path)
# Remove temporary ISO file
os.remove(iso_img)
def prepare_rootfs_vfat(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a vfat rootfs partition.
"""
du_cmd = "du -bks %s" % rootfs_dir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
extra_blocks = self.get_extra_block_count(blocks)
if extra_blocks < self.extra_space:
extra_blocks = self.extra_space
blocks += extra_blocks
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, self.mountpoint, blocks))
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
dosfs_cmd = "mkdosfs %s -S 512 -C %s %d" % (label_str, rootfs, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (rootfs, rootfs_dir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def prepare_empty_partition_squashfs(self, cr_workdir, oe_builddir,
native_sysroot):
"""
Prepare an empty squashfs partition.
"""
msger.warning("Creating of an empty squashfs %s partition was attempted. " \
"Proceeding as requested." % self.mountpoint)
path = "%s/fs_%s.%s" % (cr_workdir, self.label, self.fstype)
os.path.isfile(path) and os.remove(path)
# it is not possible to create a squashfs without source data,
# thus prepare an empty temp dir that is used as source
tmpdir = tempfile.mkdtemp()
squashfs_cmd = "mksquashfs %s %s -noappend" % \
(tmpdir, path)
exec_native_cmd(squashfs_cmd, native_sysroot)
os.rmdir(tmpdir)
# get the rootfs size in the right units for kickstart (kB)
du_cmd = "du -Lbks %s" % path
out = exec_cmd(du_cmd)
fs_size = out.split()[0]
self.size = fs_size
def prepare_rootfs_squashfs(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a squashfs rootfs partition.
"""
squashfs_cmd = "mksquashfs %s %s -noappend" % \
(rootfs_dir, rootfs)
exec_native_cmd(squashfs_cmd, native_sysroot, pseudo=pseudo)
def prepare_rootfs_squashfs(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a squashfs rootfs partition.
"""
squashfs_cmd = "mksquashfs %s %s -noappend" % \
(rootfs_dir, rootfs)
exec_native_cmd(squashfs_cmd, native_sysroot, pseudo=pseudo)
def prepare_empty_partition_btrfs(self, rootfs, oe_builddir, native_sysroot):
"""
Prepare an empty btrfs partition.
"""
dd_cmd = "dd if=/dev/zero of=%s bs=1k seek=%d count=0" % (rootfs, self.size)
exec_cmd(dd_cmd)
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -b %d %s %s" % (self.fstype, self.size * 1024, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot)
def prepare_empty_partition_btrfs(self, rootfs, oe_builddir,
native_sysroot):
"""
Prepare an empty btrfs partition.
"""
exec_cmd("truncate %s -s %d" % (rootfs, self.size * 1024))
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -b %d %s %s" % \
(self.fstype, self.size * 1024, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot)
def prepare_swap_partition(self, cr_workdir, oe_builddir, native_sysroot):
"""
Prepare a swap partition.
"""
path = "%s/fs.%s" % (cr_workdir, self.fstype)
exec_cmd("truncate %s -s %d" % (path, self.size * 1024))
import uuid
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkswap_cmd = "mkswap %s -U %s %s" % (label_str, str(uuid.uuid1()), path)
exec_native_cmd(mkswap_cmd, native_sysroot)
def prepare_empty_partition_btrfs(self, rootfs, oe_builddir,
native_sysroot):
"""
Prepare an empty btrfs partition.
"""
exec_cmd("truncate %s -s %d" % (rootfs, self.size * 1024))
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -b %d %s %s" % \
(self.fstype, self.size * 1024, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot)
def prepare_swap_partition(self, cr_workdir, oe_builddir, native_sysroot):
"""
Prepare a swap partition.
"""
path = "%s/fs.%s" % (cr_workdir, self.fstype)
exec_cmd("truncate %s -s %d" % (path, self.size * 1024))
import uuid
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkswap_cmd = "mkswap %s -U %s %s" % (label_str, str(uuid.uuid1()), path)
exec_native_cmd(mkswap_cmd, native_sysroot)
def prepare_empty_partition_vfat(self, rootfs, oe_builddir, native_sysroot):
"""
Prepare an empty vfat partition.
"""
blocks = self.size
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
dosfs_cmd = "mkdosfs %s -S 512 -C %s %d" % (label_str, rootfs, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def prepare_empty_partition_ext(self, rootfs, oe_builddir, native_sysroot):
"""
Prepare an empty ext2/3/4 partition.
"""
exec_cmd("truncate %s -s %d" % (rootfs, self.size * 1024))
extra_imagecmd = "-i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -F %s %s %s" % \
(self.fstype, extra_imagecmd, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot)
def prepare_empty_partition_btrfs(self, rootfs, oe_builddir,
native_sysroot):
"""
Prepare an empty btrfs partition.
"""
with open(rootfs, 'w') as sparse:
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -b %d %s %s" % \
(self.fstype, self.size * 1024, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot)
def prepare_swap_partition(self, cr_workdir, oe_builddir, native_sysroot):
"""
Prepare a swap partition.
"""
path = "%s/fs.%s" % (cr_workdir, self.fstype)
with open(path, 'w') as sparse:
os.ftruncate(sparse.fileno(), self.size * 1024)
import uuid
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkswap_cmd = "mkswap %s -U %s %s" % (label_str, str(uuid.uuid1()), path)
exec_native_cmd(mkswap_cmd, native_sysroot)
def prepare_swap_partition(self, cr_workdir, oe_builddir, native_sysroot):
"""
Prepare a swap partition.
"""
path = "%s/fs.%s" % (cr_workdir, self.fstype)
with open(path, 'w') as sparse:
os.ftruncate(sparse.fileno(), self.size * 1024)
import uuid
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkswap_cmd = "mkswap %s -U %s %s" % (label_str, str(uuid.uuid1()), path)
exec_native_cmd(mkswap_cmd, native_sysroot)
def prepare_empty_partition_ext(self, rootfs, oe_builddir, native_sysroot):
"""
Prepare an empty ext2/3/4 partition.
"""
dd_cmd = "dd if=/dev/zero of=%s bs=1k seek=%d count=0" % (rootfs, self.size)
exec_cmd(dd_cmd)
extra_imagecmd = "-i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -F %s %s %s" % (self.fstype, extra_imagecmd, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot)
def prepare_empty_partition_ext(self, rootfs, oe_builddir,
native_sysroot):
"""
Prepare an empty ext2/3/4 partition.
"""
exec_cmd("truncate %s -s %d" % (rootfs, self.size * 1024))
extra_imagecmd = "-i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -F %s %s %s" % \
(self.fstype, extra_imagecmd, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot)
def prepare_swap_partition(self, cr_workdir, oe_builddir, native_sysroot):
"""
Prepare a swap partition.
"""
path = "%s/fs.%s" % (cr_workdir, self.fstype)
dd_cmd = "dd if=/dev/zero of=%s bs=1k seek=%d count=0" % \
(path, self.size)
exec_cmd(dd_cmd)
import uuid
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkswap_cmd = "mkswap %s -U %s %s" % (label_str, str(uuid.uuid1()), path)
exec_native_cmd(mkswap_cmd, native_sysroot)
def prepare_empty_partition_btrfs(self, rootfs, oe_builddir,
native_sysroot):
"""
Prepare an empty btrfs partition.
"""
dd_cmd = "dd if=/dev/zero of=%s bs=1k seek=%d count=0" % \
(rootfs, self.size)
exec_cmd(dd_cmd)
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -b %d %s %s" % \
(self.fstype, self.size * 1024, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot)
def prepare_empty_partition_vfat(self, rootfs, oe_builddir,
native_sysroot):
"""
Prepare an empty vfat partition.
"""
blocks = self.size
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
dosfs_cmd = "mkdosfs %s -S 512 -C %s %d" % (label_str, rootfs, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def do_prepare_partition(cls, part, source_params, image_creator,
image_creator_workdir, oe_builddir, bootimg_dir,
kernel_dir, krootfs_dir, native_sysroot):
"""
Creates partition out of rootfs directory
Prepare content for a rootfs partition i.e. create a partition
and fill it from a /rootfs dir.
Install syslinux bootloader into root partition image file
"""
def is_exe(exepath):
"""Verify exepath is an executable file"""
return os.path.isfile(exepath) and os.access(exepath, os.X_OK)
# Make sure syslinux-nomtools is available in native sysroot or fail
native_syslinux_nomtools = os.path.join(native_sysroot,
"usr/bin/syslinux-nomtools")
if not is_exe(native_syslinux_nomtools):
msger.info("building syslinux-native...")
misc.exec_cmd("bitbake syslinux-native")
if not is_exe(native_syslinux_nomtools):
msger.error("Couldn't find syslinux-nomtools (%s), exiting\n" %
native_syslinux_nomtools)
if part.rootfs is None:
if 'ROOTFS_DIR' not in krootfs_dir:
msger.error("Couldn't find --rootfs-dir, exiting")
rootfs_dir = krootfs_dir['ROOTFS_DIR']
else:
if part.rootfs in krootfs_dir:
rootfs_dir = krootfs_dir[part.rootfs]
elif part.rootfs:
rootfs_dir = part.rootfs
else:
msg = "Couldn't find --rootfs-dir=%s connection"
msg += " or it is not a valid path, exiting"
msger.error(msg % part.rootfs)
real_rootfs_dir = cls._get_rootfs_dir(rootfs_dir)
part.set_rootfs(real_rootfs_dir)
part.prepare_rootfs(image_creator_workdir, oe_builddir,
real_rootfs_dir, native_sysroot)
# install syslinux into rootfs partition
syslinux_cmd = "syslinux-nomtools -d /boot -i %s" % part.source_file
misc.exec_native_cmd(syslinux_cmd, native_sysroot)
def prepare_empty_partition_ext(self, rootfs, oe_builddir, native_sysroot):
"""
Prepare an empty ext2/3/4 partition.
"""
size = self.disk_size
with open(rootfs, 'w') as sparse:
os.ftruncate(sparse.fileno(), size * 1024)
extra_imagecmd = "-i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -F %s %s %s" % \
(self.fstype, extra_imagecmd, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot)
def prepare_empty_partition_ext(self, rootfs, oe_builddir, native_sysroot):
"""
Prepare an empty ext2/3/4 partition.
"""
dd_cmd = "dd if=/dev/zero of=%s bs=1k seek=%d count=0" % \
(rootfs, self.size)
exec_cmd(dd_cmd)
extra_imagecmd = "-i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -F %s %s %s" % \
(self.fstype, extra_imagecmd, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot)
def prepare_empty_partition_ext(self, rootfs, oe_builddir,
native_sysroot):
"""
Prepare an empty ext2/3/4 partition.
"""
with open(rootfs, 'w') as sparse:
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
extra_imagecmd = "-i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -F %s %s %s" % \
(self.fstype, extra_imagecmd, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot)
def do_prepare_partition(cls, part, source_params, image_creator,
image_creator_workdir, oe_builddir, bootimg_dir,
kernel_dir, krootfs_dir, native_sysroot):
"""
Creates partition out of rootfs directory
Prepare content for a rootfs partition i.e. create a partition
and fill it from a /rootfs dir.
Install syslinux bootloader into root partition image file
"""
def is_exe(exepath):
"""Verify exepath is an executable file"""
return os.path.isfile(exepath) and os.access(exepath, os.X_OK)
# Make sure syslinux-nomtools is available in native sysroot or fail
native_syslinux_nomtools = os.path.join(native_sysroot, "usr/bin/syslinux-nomtools")
if not is_exe(native_syslinux_nomtools):
msger.info("building syslinux-native...")
misc.exec_cmd("bitbake syslinux-native")
if not is_exe(native_syslinux_nomtools):
msger.error("Couldn't find syslinux-nomtools (%s), exiting\n" %
native_syslinux_nomtools)
if part.rootfs is None:
if 'ROOTFS_DIR' not in krootfs_dir:
msger.error("Couldn't find --rootfs-dir, exiting")
rootfs_dir = krootfs_dir['ROOTFS_DIR']
else:
if part.rootfs in krootfs_dir:
rootfs_dir = krootfs_dir[part.rootfs]
elif part.rootfs:
rootfs_dir = part.rootfs
else:
msg = "Couldn't find --rootfs-dir=%s connection"
msg += " or it is not a valid path, exiting"
msger.error(msg % part.rootfs)
real_rootfs_dir = cls._get_rootfs_dir(rootfs_dir)
part.set_rootfs(real_rootfs_dir)
part.prepare_rootfs(image_creator_workdir, oe_builddir, real_rootfs_dir, native_sysroot)
# install syslinux into rootfs partition
syslinux_cmd = "syslinux-nomtools -d /boot -i %s" % part.source_file
misc.exec_native_cmd(syslinux_cmd, native_sysroot)
def prepare_rootfs_vfat(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a vfat rootfs partition.
"""
du_cmd = "du -bks %s" % rootfs_dir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
extra_blocks = self.get_extra_block_count(blocks)
if extra_blocks < self.extra_space:
extra_blocks = self.extra_space
blocks += extra_blocks
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, self.mountpoint, blocks))
# Ensure total sectors is an integral number of sectors per
# track or mcopy will complain. Sectors are 512 bytes, and we
# generate images with 32 sectors per track. This calculation
# is done in blocks, thus the mod by 16 instead of 32. Apply
# sector count fix only when needed.
if blocks % 16 != 0:
blocks += (16 - (blocks % 16))
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
dosfs_cmd = "mkdosfs %s -S 512 -C %s %d" % (label_str, rootfs, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (rootfs, rootfs_dir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def prepare_rootfs_vfat(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a vfat rootfs partition.
"""
du_cmd = "du -bks %s" % rootfs_dir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
extra_blocks = self.get_extra_block_count(blocks)
if extra_blocks < self.extra_space:
extra_blocks = self.extra_space
blocks += extra_blocks
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, self.mountpoint, blocks))
# Ensure total sectors is an integral number of sectors per
# track or mcopy will complain. Sectors are 512 bytes, and we
# generate images with 32 sectors per track. This calculation
# is done in blocks, thus the mod by 16 instead of 32. Apply
# sector count fix only when needed.
if blocks % 16 != 0:
blocks += (16 - (blocks % 16))
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
dosfs_cmd = "mkdosfs %s -S 512 -C %s %d" % (label_str, rootfs, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (rootfs, rootfs_dir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def prepare_rootfs_vfat(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a vfat rootfs partition.
"""
du_cmd = "du -bks %s" % rootfs_dir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
rootfs_size = self.get_rootfs_size(blocks)
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
dosfs_cmd = "mkdosfs %s -S 512 -C %s %d" % (label_str, rootfs, rootfs_size)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (rootfs, rootfs_dir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def prepare_rootfs_btrfs(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a btrfs rootfs partition.
Currently handles ext2/3/4 and btrfs.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
rootfs_size = self.get_rootfs_size(actual_rootfs_size)
with open(rootfs, 'w') as sparse:
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -b %d -r %s %s %s" % \
(self.fstype, rootfs_size * 1024, rootfs_dir, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def __create_partition(self, device, parttype, fstype, start, size):
""" Create a partition on an image described by the 'device' object. """
# Start is included to the size so we need to substract one from the end.
end = start + size - 1
msger.debug("Added '%s' partition, sectors %d-%d, size %d sectors" %
(parttype, start, end, size))
cmd = "parted -s %s unit s mkpart %s" % (device, parttype)
if fstype:
cmd += " %s" % fstype
cmd += " %d %d" % (start, end)
return exec_native_cmd(cmd, self.native_sysroot)
def prepare_rootfs_vfat(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a vfat rootfs partition.
"""
du_cmd = "du -bks %s" % rootfs_dir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
rootfs_size = self.get_rootfs_size(blocks)
label_str = "-n boot"
if self.label:
label_str = "-n %s" % self.label
dosfs_cmd = "mkdosfs %s -S 512 -C %s %d" % (label_str, rootfs, rootfs_size)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (rootfs, rootfs_dir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % rootfs
exec_cmd(chmod_cmd)
def __create_partition(self, device, parttype, fstype, start, size):
""" Create a partition on an image described by the 'device' object. """
# Start is included to the size so we need to substract one from the end.
end = start + size - 1
msger.debug("Added '%s' partition, sectors %d-%d, size %d sectors" %
(parttype, start, end, size))
cmd = "parted -s %s unit s mkpart %s" % (device, parttype)
if fstype:
cmd += " %s" % fstype
cmd += " %d %d" % (start, end)
return exec_native_cmd(cmd, self.native_sysroot)
def prepare_rootfs_btrfs(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for a btrfs rootfs partition.
Currently handles ext2/3/4 and btrfs.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
rootfs_size = self.get_rootfs_size(actual_rootfs_size)
with open(rootfs, 'w') as sparse:
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -b %d -r %s %s %s" % \
(self.fstype, rootfs_size * 1024, rootfs_dir, label_str, rootfs)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def prepare_rootfs_ext(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for an ext2/3/4 rootfs partition.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
rootfs_size = self.get_rootfs_size(actual_rootfs_size)
with open(rootfs, 'w') as sparse:
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
extra_imagecmd = "-i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -F %s %s %s -d %s" % \
(self.fstype, extra_imagecmd, rootfs, label_str, rootfs_dir)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def prepare_rootfs_ext(self, rootfs, oe_builddir, rootfs_dir,
native_sysroot, pseudo):
"""
Prepare content for an ext2/3/4 rootfs partition.
"""
du_cmd = "du -ks %s" % rootfs_dir
out = exec_cmd(du_cmd)
actual_rootfs_size = int(out.split()[0])
rootfs_size = self.get_rootfs_size(actual_rootfs_size)
with open(rootfs, 'w') as sparse:
os.ftruncate(sparse.fileno(), rootfs_size * 1024)
extra_imagecmd = "-i 8192"
label_str = ""
if self.label:
label_str = "-L %s" % self.label
mkfs_cmd = "mkfs.%s -F %s %s %s -d %s" % \
(self.fstype, extra_imagecmd, rootfs, label_str, rootfs_dir)
exec_native_cmd(mkfs_cmd, native_sysroot, pseudo=pseudo)
def __run_parted(self, args):
""" Run parted with arguments specified in the 'args' list. """
args.insert(0, "parted")
args = ' '.join(args)
msger.debug(args)
rc, out = exec_native_cmd(args, self.native_sysroot)
if out:
msger.debug('"parted" output: %s' % out)
if rc != 0:
# We don't throw exception when return code is not 0, because
# parted always fails to reload part table with loop devices. This
# prevents us from distinguishing real errors based on return
# code.
msger.error("WARNING: parted returned '%s' instead of 0 (use --debug for details)" % rc)
def __run_parted(self, args):
""" Run parted with arguments specified in the 'args' list. """
args.insert(0, "parted")
args = ' '.join(args)
msger.debug(args)
rc, out = exec_native_cmd(args, self.native_sysroot)
if out:
msger.debug('"parted" output: %s' % out)
if rc != 0:
# We don't throw exception when return code is not 0, because
# parted always fails to reload part table with loop devices. This
# prevents us from distinguishing real errors based on return
# code.
msger.error(
"WARNING: parted returned '%s' instead of 0 (use --debug for details)"
% rc)
def __format_disks(self):
self.layout_partitions()
for dev in self.disks.keys():
d = self.disks[dev]
msger.debug("Initializing partition table for %s" % \
(d['disk'].device))
exec_native_cmd("parted -s %s mklabel %s" % \
(d['disk'].device, d['ptable_format']),
self.native_sysroot)
msger.debug("Creating partitions")
for p in self.partitions:
if p['num'] == 0:
continue
d = self.disks[p['disk_name']]
if d['ptable_format'] == "msdos" and p['num'] == 5:
# Create an extended partition (note: extended
# partition is described in MBR and contains all
# logical partitions). The logical partitions save a
# sector for an EBR just before the start of a
# partition. The extended partition must start one
# sector before the start of the first logical
# partition. This way the first EBR is inside of the
# extended partition. Since the extended partitions
# starts a sector before the first logical partition,
# add a sector at the back, so that there is enough
# room for all logical partitions.
self.__create_partition(d['disk'].device, "extended",
None, p['start'] - 1,
d['offset'] - p['start'] + 1)
if p['fstype'] == "swap":
parted_fs_type = "linux-swap"
elif p['fstype'] == "vfat":
parted_fs_type = "fat32"
elif p['fstype'] == "msdos":
parted_fs_type = "fat16"
elif p['fstype'] == "ontrackdm6aux3":
parted_fs_type = "ontrackdm6aux3"
else:
# Type for ext2/ext3/ext4/btrfs
parted_fs_type = "ext2"
# Boot ROM of OMAP boards require vfat boot partition to have an
# even number of sectors.
if p['mountpoint'] == "/boot" and p['fstype'] in ["vfat", "msdos"] \
and p['size'] % 2:
msger.debug("Substracting one sector from '%s' partition to " \
"get even number of sectors for the partition" % \
p['mountpoint'])
p['size'] -= 1
self.__create_partition(d['disk'].device, p['type'],
parted_fs_type, p['start'], p['size'])
if p['part_type']:
msger.debug("partition %d: set type UID to %s" % \
(p['num'], p['part_type']))
exec_native_cmd("sgdisk --typecode=%d:%s %s" % \
(p['num'], p['part_type'],
d['disk'].device), self.native_sysroot)
if p['uuid']:
msger.debug("partition %d: set UUID to %s" % \
(p['num'], p['uuid']))
exec_native_cmd("sgdisk --partition-guid=%d:%s %s" % \
(p['num'], p['uuid'],
d['disk'].device),
self.native_sysroot)
if p['boot']:
flag_name = "legacy_boot" if d['ptable_format'] == 'gpt' else "boot"
msger.debug("Set '%s' flag for partition '%s' on disk '%s'" % \
(flag_name, p['num'], d['disk'].device))
exec_native_cmd("parted -s %s set %d %s on" % \
(d['disk'].device, p['num'], flag_name),
self.native_sysroot)
# Parted defaults to enabling the lba flag for fat16 partitions,
# which causes compatibility issues with some firmware (and really
# isn't necessary).
if parted_fs_type == "fat16":
if d['ptable_format'] == 'msdos':
msger.debug("Disable 'lba' flag for partition '%s' on disk '%s'" % \
(p['num'], d['disk'].device))
exec_native_cmd("parted -s %s set %d lba off" % \
(d['disk'].device, p['num']),
self.native_sysroot)
def do_prepare_partition(cls, part, source_params, cr, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir, rootfs_dir,
native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, prepare content for legacy bios boot partition.
"""
def _has_syslinux(dir):
if dir:
syslinux = "%s/syslinux" % dir
if os.path.exists(syslinux):
return True
return False
if not _has_syslinux(bootimg_dir):
bootimg_dir = get_bitbake_var("STAGING_DATADIR")
if not bootimg_dir:
msger.error("Couldn't find STAGING_DATADIR, exiting\n")
if not _has_syslinux(bootimg_dir):
msger.error("Please build syslinux first\n")
# just so the result notes display it
cr.set_bootimg_dir(bootimg_dir)
staging_kernel_dir = kernel_dir
hdddir = "%s/hdd/boot" % cr_workdir
install_cmd = "install -m 0644 %s/bzImage %s/vmlinuz" \
% (staging_kernel_dir, hdddir)
exec_cmd(install_cmd)
install_cmd = "install -m 444 %s/syslinux/ldlinux.sys %s/ldlinux.sys" \
% (bootimg_dir, hdddir)
exec_cmd(install_cmd)
du_cmd = "du -bks %s" % hdddir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
extra_blocks = part.get_extra_block_count(blocks)
if extra_blocks < BOOTDD_EXTRA_SPACE:
extra_blocks = BOOTDD_EXTRA_SPACE
blocks += extra_blocks
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, part.mountpoint, blocks))
# Ensure total sectors is an integral number of sectors per
# track or mcopy will complain. Sectors are 512 bytes, and we
# generate images with 32 sectors per track. This calculation is
# done in blocks, thus the mod by 16 instead of 32.
blocks += (16 - (blocks % 16))
# dosfs image, created by mkdosfs
bootimg = "%s/boot.img" % cr_workdir
dosfs_cmd = "mkdosfs -n boot -S 512 -C %s %d" % (bootimg, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (bootimg, hdddir)
exec_native_cmd(mcopy_cmd, native_sysroot)
syslinux_cmd = "syslinux %s" % bootimg
exec_native_cmd(syslinux_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % bootimg
exec_cmd(chmod_cmd)
du_cmd = "du -Lbks %s" % bootimg
out = exec_cmd(du_cmd)
bootimg_size = out.split()[0]
part.set_size(bootimg_size)
part.set_source_file(bootimg)
def __format_disks(self):
self.layout_partitions()
for dev in self.disks:
disk = self.disks[dev]
msger.debug("Initializing partition table for %s" % \
(disk['disk'].device))
exec_native_cmd("parted -s %s mklabel %s" % \
(disk['disk'].device, disk['ptable_format']),
self.native_sysroot)
if disk['identifier']:
msger.debug("Set disk identifier %x" % disk['identifier'])
with open(disk['disk'].device, 'r+b') as img:
img.seek(0x1B8)
img.write(disk['identifier'].to_bytes(4, 'little'))
msger.debug("Creating partitions")
for part in self.partitions:
if part['num'] == 0:
continue
disk = self.disks[part['disk_name']]
if disk['ptable_format'] == "msdos" and part['num'] == 5:
# Create an extended partition (note: extended
# partition is described in MBR and contains all
# logical partitions). The logical partitions save a
# sector for an EBR just before the start of a
# partition. The extended partition must start one
# sector before the start of the first logical
# partition. This way the first EBR is inside of the
# extended partition. Since the extended partitions
# starts a sector before the first logical partition,
# add a sector at the back, so that there is enough
# room for all logical partitions.
self.__create_partition(disk['disk'].device, "extended", None,
part['start'] - 1,
disk['offset'] - part['start'] + 1)
if part['fstype'] == "swap":
parted_fs_type = "linux-swap"
elif part['fstype'] == "vfat":
parted_fs_type = "fat32"
elif part['fstype'] == "msdos":
parted_fs_type = "fat16"
elif part['fstype'] == "ontrackdm6aux3":
parted_fs_type = "ontrackdm6aux3"
else:
# Type for ext2/ext3/ext4/btrfs
parted_fs_type = "ext2"
# Boot ROM of OMAP boards require vfat boot partition to have an
# even number of sectors.
if part['mountpoint'] == "/boot" and part['fstype'] in ["vfat", "msdos"] \
and part['size'] % 2:
msger.debug("Subtracting one sector from '%s' partition to " \
"get even number of sectors for the partition" % \
part['mountpoint'])
part['size'] -= 1
self.__create_partition(disk['disk'].device, part['type'],
parted_fs_type, part['start'],
part['size'])
if part['part_type']:
msger.debug("partition %d: set type UID to %s" % \
(part['num'], part['part_type']))
exec_native_cmd("sgdisk --typecode=%d:%s %s" % \
(part['num'], part['part_type'],
disk['disk'].device), self.native_sysroot)
if part['uuid'] and disk['ptable_format'] == "gpt":
msger.debug("partition %d: set UUID to %s" % \
(part['num'], part['uuid']))
exec_native_cmd("sgdisk --partition-guid=%d:%s %s" % \
(part['num'], part['uuid'], disk['disk'].device),
self.native_sysroot)
if part['boot']:
flag_name = "legacy_boot" if disk[
'ptable_format'] == 'gpt' else "boot"
msger.debug("Set '%s' flag for partition '%s' on disk '%s'" % \
(flag_name, part['num'], disk['disk'].device))
exec_native_cmd("parted -s %s set %d %s on" % \
(disk['disk'].device, part['num'], flag_name),
self.native_sysroot)
if part['system_id']:
exec_native_cmd("sfdisk --part-type %s %s %s" % \
(disk['disk'].device, part['num'], part['system_id']),
self.native_sysroot)
# Parted defaults to enabling the lba flag for fat16 partitions,
# which causes compatibility issues with some firmware (and really
# isn't necessary).
if parted_fs_type == "fat16":
if disk['ptable_format'] == 'msdos':
msger.debug("Disable 'lba' flag for partition '%s' on disk '%s'" % \
(part['num'], disk['disk'].device))
exec_native_cmd("parted -s %s set %d lba off" % \
(disk['disk'].device, part['num']),
self.native_sysroot)
def do_prepare_partition(self, part, source_params, cr, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir, rootfs_dir,
native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, prepare content for an EFI (grub) boot partition.
"""
if not bootimg_dir:
bootimg_dir = get_bitbake_var("HDDDIR")
if not bootimg_dir:
msger.error("Couldn't find HDDDIR, exiting\n")
# just so the result notes display it
cr.set_bootimg_dir(bootimg_dir)
staging_kernel_dir = kernel_dir
hdddir = "%s/hdd/boot" % cr_workdir
install_cmd = "install -m 0644 %s/bzImage %s/bzImage" % \
(staging_kernel_dir, hdddir)
exec_cmd(install_cmd)
try:
if source_params['loader'] == 'grub-efi':
shutil.copyfile("%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir,
"%s/grub.cfg" % cr_workdir)
cp_cmd = "cp %s/EFI/BOOT/* %s/EFI/BOOT" % (bootimg_dir, hdddir)
exec_cmd(cp_cmd, True)
shutil.move("%s/grub.cfg" % cr_workdir,
"%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir)
elif source_params['loader'] == 'gummiboot':
cp_cmd = "cp %s/EFI/BOOT/* %s/EFI/BOOT" % (bootimg_dir, hdddir)
exec_cmd(cp_cmd, True)
else:
msger.error("unrecognized bootimg-efi loader: %s" %
source_params['loader'])
except KeyError:
msger.error("bootimg-efi requires a loader, none specified")
du_cmd = "du -bks %s" % hdddir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
extra_blocks = part.get_extra_block_count(blocks)
if extra_blocks < BOOTDD_EXTRA_SPACE:
extra_blocks = BOOTDD_EXTRA_SPACE
blocks += extra_blocks
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, part.mountpoint, blocks))
# Ensure total sectors is an integral number of sectors per
# track or mcopy will complain. Sectors are 512 bytes, and we
# generate images with 32 sectors per track. This calculation is
# done in blocks, thus the mod by 16 instead of 32.
blocks += (16 - (blocks % 16))
# dosfs image, created by mkdosfs
bootimg = "%s/boot.img" % cr_workdir
dosfs_cmd = "mkdosfs -n efi -C %s %d" % (bootimg, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (bootimg, hdddir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % bootimg
exec_cmd(chmod_cmd)
du_cmd = "du -Lbks %s" % bootimg
out = exec_cmd(du_cmd)
bootimg_size = out.split()[0]
part.set_size(bootimg_size)
part.set_source_file(bootimg)
def do_prepare_partition(cls, part, source_params, cr, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir, rootfs_dir,
native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, prepare content for a bootable ISO image.
"""
isodir = "%s/ISO" % cr_workdir
if part.rootfs is None:
if not 'ROOTFS_DIR' in rootfs_dir:
msger.error("Couldn't find --rootfs-dir, exiting.\n")
rootfs_dir = rootfs_dir['ROOTFS_DIR']
else:
if part.rootfs in rootfs_dir:
rootfs_dir = rootfs_dir[part.rootfs]
elif part.rootfs:
rootfs_dir = part.rootfs
else:
msg = "Couldn't find --rootfs-dir=%s connection "
msg += "or it is not a valid path, exiting.\n"
msger.error(msg % part.rootfs)
if not os.path.isdir(rootfs_dir):
rootfs_dir = get_bitbake_var("IMAGE_ROOTFS")
if not os.path.isdir(rootfs_dir):
msger.error("Couldn't find IMAGE_ROOTFS, exiting.\n")
part.set_rootfs(rootfs_dir)
# Prepare rootfs.img
hdd_dir = get_bitbake_var("HDDDIR")
img_iso_dir = get_bitbake_var("ISODIR")
rootfs_img = "%s/rootfs.img" % hdd_dir
if not os.path.isfile(rootfs_img):
rootfs_img = "%s/rootfs.img" % img_iso_dir
if not os.path.isfile(rootfs_img):
# check if rootfs.img is in deploydir
deploy_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
image_name = get_bitbake_var("IMAGE_LINK_NAME")
rootfs_img = "%s/%s.%s" \
% (deploy_dir, image_name, part.fstype)
if not os.path.isfile(rootfs_img):
# create image file with type specified by --fstype
# which contains rootfs
du_cmd = "du -bks %s" % rootfs_dir
out = exec_cmd(du_cmd)
part.set_size(int(out.split()[0]))
part.extra_space = 0
part.overhead_factor = 1.2
part.prepare_rootfs(cr_workdir, oe_builddir, rootfs_dir, \
native_sysroot)
rootfs_img = part.source_file
install_cmd = "install -m 0644 %s %s/rootfs.img" \
% (rootfs_img, isodir)
exec_cmd(install_cmd)
# Remove the temporary file created by part.prepare_rootfs()
if os.path.isfile(part.source_file):
os.remove(part.source_file)
# Prepare initial ramdisk
initrd = "%s/initrd" % hdd_dir
if not os.path.isfile(initrd):
initrd = "%s/initrd" % img_iso_dir
if not os.path.isfile(initrd):
initrd = cls._build_initramfs_path(rootfs_dir, cr_workdir)
install_cmd = "install -m 0644 %s %s/initrd" \
% (initrd, isodir)
exec_cmd(install_cmd)
# Remove the temporary file created by _build_initramfs_path function
if os.path.isfile("%s/initrd.cpio.gz" % cr_workdir):
os.remove("%s/initrd.cpio.gz" % cr_workdir)
# Install bzImage
install_cmd = "install -m 0644 %s/bzImage %s/bzImage" % \
(kernel_dir, isodir)
exec_cmd(install_cmd)
#Create bootloader for efi boot
try:
if source_params['loader'] == 'grub-efi':
# Builds grub.cfg if ISODIR didn't exist or
# didn't contains grub.cfg
bootimg_dir = img_iso_dir
if not os.path.exists("%s/EFI/BOOT" % bootimg_dir):
bootimg_dir = "%s/bootimg" % cr_workdir
if os.path.exists(bootimg_dir):
shutil.rmtree(bootimg_dir)
install_cmd = "install -d %s/EFI/BOOT" % bootimg_dir
exec_cmd(install_cmd)
if not os.path.isfile("%s/EFI/BOOT/boot.cfg" % bootimg_dir):
cls.do_configure_grubefi(part, cr, bootimg_dir)
# Builds bootx64.efi/bootia32.efi if ISODIR didn't exist or
# didn't contains it
target_arch = get_bitbake_var("TARGET_SYS")
if not target_arch:
msger.error("Coludn't find target architecture\n")
if re.match("x86_64", target_arch):
grub_target = 'x86_64-efi'
grub_image = "bootx64.efi"
elif re.match('i.86', target_arch):
grub_target = 'i386-efi'
grub_image = "bootia32.efi"
else:
msger.error("grub-efi is incompatible with target %s\n" \
% target_arch)
if not os.path.isfile("%s/EFI/BOOT/%s" \
% (bootimg_dir, grub_image)):
grub_path = get_bitbake_var("STAGING_LIBDIR")
if not grub_path:
msger.error("Couldn't find STAGING_LIBDIR, exiting.\n")
grub_core = "%s/grub/%s" % (grub_path, grub_target)
if not os.path.exists(grub_core):
msger.info("Building grub-efi...\n")
exec_cmd("bitbake grub-efi")
if not os.path.exists(grub_core):
msger.error("Please build grub-efi first\n")
grub_cmd = "grub-mkimage -p '/EFI/BOOT' "
grub_cmd += "-d %s " % grub_core
grub_cmd += "-O %s -o %s/EFI/BOOT/%s " \
% (grub_target, bootimg_dir, grub_image)
grub_cmd += "part_gpt part_msdos ntfs ntfscomp fat ext2 "
grub_cmd += "normal chain boot configfile linux multiboot "
grub_cmd += "search efi_gop efi_uga font gfxterm gfxmenu "
grub_cmd += "terminal minicmd test iorw loadenv echo help "
grub_cmd += "reboot serial terminfo iso9660 loopback tar "
grub_cmd += "memdisk ls search_fs_uuid udf btrfs xfs lvm "
grub_cmd += "reiserfs ata "
exec_native_cmd(grub_cmd, native_sysroot)
else:
# TODO: insert gummiboot stuff
msger.error("unrecognized bootimg-efi loader: %s" \
% source_params['loader'])
except KeyError:
msger.error("bootimg-efi requires a loader, none specified")
if os.path.exists("%s/EFI/BOOT" % isodir):
shutil.rmtree("%s/EFI/BOOT" % isodir)
shutil.copytree(bootimg_dir + "/EFI/BOOT", isodir + "/EFI/BOOT")
# If exists, remove cr_workdir/bootimg temporary folder
if os.path.exists("%s/bootimg" % cr_workdir):
shutil.rmtree("%s/bootimg" % cr_workdir)
# Create efi.img that contains bootloader files for EFI booting
# if ISODIR didn't exist or didn't contains it
if os.path.isfile("%s/efi.img" % img_iso_dir):
install_cmd = "install -m 0644 %s/efi.img %s/efi.img" % \
(img_iso_dir, isodir)
exec_cmd(install_cmd)
else:
du_cmd = "du -bks %s/EFI" % isodir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
# Add some extra space for file system overhead
blocks += 100
msg = "Added 100 extra blocks to %s to get to %d total blocks" \
% (part.mountpoint, blocks)
msger.debug(msg)
# Ensure total sectors is an integral number of sectors per
# track or mcopy will complain. Sectors are 512 bytes, and we
# generate images with 32 sectors per track. This calculation is
# done in blocks, thus the mod by 16 instead of 32.
blocks += (16 - (blocks % 16))
# dosfs image for EFI boot
bootimg = "%s/efi.img" % isodir
dosfs_cmd = 'mkfs.vfat -n "EFIimg" -S 512 -C %s %d' \
% (bootimg, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mmd_cmd = "mmd -i %s ::/EFI" % bootimg
exec_native_cmd(mmd_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/EFI/* ::/EFI/" \
% (bootimg, isodir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % bootimg
exec_cmd(chmod_cmd)
# Prepare files for legacy boot
syslinux_dir = get_bitbake_var("STAGING_DATADIR")
if not syslinux_dir:
msger.error("Couldn't find STAGING_DATADIR, exiting.\n")
if os.path.exists("%s/isolinux" % isodir):
shutil.rmtree("%s/isolinux" % isodir)
install_cmd = "install -d %s/isolinux" % isodir
exec_cmd(install_cmd)
cls.do_configure_syslinux(cr, cr_workdir)
install_cmd = "install -m 444 %s/syslinux/ldlinux.sys " % syslinux_dir
install_cmd += "%s/isolinux/ldlinux.sys" % isodir
exec_cmd(install_cmd)
install_cmd = "install -m 444 %s/syslinux/isohdpfx.bin " % syslinux_dir
install_cmd += "%s/isolinux/isohdpfx.bin" % isodir
exec_cmd(install_cmd)
install_cmd = "install -m 644 %s/syslinux/isolinux.bin " % syslinux_dir
install_cmd += "%s/isolinux/isolinux.bin" % isodir
exec_cmd(install_cmd)
install_cmd = "install -m 644 %s/syslinux/ldlinux.c32 " % syslinux_dir
install_cmd += "%s/isolinux/ldlinux.c32" % isodir
exec_cmd(install_cmd)
#create ISO image
iso_img = "%s/tempiso_img.iso" % cr_workdir
iso_bootimg = "isolinux/isolinux.bin"
iso_bootcat = "isolinux/boot.cat"
efi_img = "efi.img"
mkisofs_cmd = "mkisofs -V %s " % part.label
mkisofs_cmd += "-o %s -U " % iso_img
mkisofs_cmd += "-J -joliet-long -r -iso-level 2 -b %s " % iso_bootimg
mkisofs_cmd += "-c %s -no-emul-boot -boot-load-size 4 " % iso_bootcat
mkisofs_cmd += "-boot-info-table -eltorito-alt-boot "
mkisofs_cmd += "-eltorito-platform 0xEF -eltorito-boot %s " % efi_img
mkisofs_cmd += "-no-emul-boot %s " % isodir
msger.debug("running command: %s" % mkisofs_cmd)
exec_native_cmd(mkisofs_cmd, native_sysroot)
shutil.rmtree(isodir)
du_cmd = "du -Lbks %s" % iso_img
out = exec_cmd(du_cmd)
isoimg_size = int(out.split()[0])
part.set_size(isoimg_size)
part.set_source_file(iso_img)
def do_prepare_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
rootfs_dir, native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, prepare content for an EFI (grub) boot partition.
"""
if not bootimg_dir:
bootimg_dir = get_bitbake_var("HDDDIR")
if not bootimg_dir:
msger.error("Couldn't find HDDDIR, exiting\n")
# just so the result notes display it
creator.set_bootimg_dir(bootimg_dir)
staging_kernel_dir = kernel_dir
hdddir = "%s/hdd/boot" % cr_workdir
install_cmd = "install -m 0644 %s/bzImage %s/bzImage" % \
(staging_kernel_dir, hdddir)
exec_cmd(install_cmd)
try:
if source_params['loader'] == 'grub-efi':
shutil.copyfile("%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir,
"%s/grub.cfg" % cr_workdir)
cp_cmd = "cp %s/EFI/BOOT/* %s/EFI/BOOT" % (bootimg_dir, hdddir)
exec_cmd(cp_cmd, True)
shutil.move("%s/grub.cfg" % cr_workdir,
"%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir)
elif source_params['loader'] == 'systemd-boot':
cp_cmd = "cp %s/EFI/BOOT/* %s/EFI/BOOT" % (bootimg_dir, hdddir)
exec_cmd(cp_cmd, True)
else:
msger.error("unrecognized bootimg-efi loader: %s" % source_params['loader'])
except KeyError:
msger.error("bootimg-efi requires a loader, none specified")
startup = os.path.join(bootimg_dir, "startup.nsh")
if os.path.exists(startup):
cp_cmd = "cp %s %s/" % (startup, hdddir)
exec_cmd(cp_cmd, True)
du_cmd = "du -bks %s" % hdddir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
extra_blocks = part.get_extra_block_count(blocks)
if extra_blocks < BOOTDD_EXTRA_SPACE:
extra_blocks = BOOTDD_EXTRA_SPACE
blocks += extra_blocks
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, part.mountpoint, blocks))
# dosfs image, created by mkdosfs
bootimg = "%s/boot.img" % cr_workdir
dosfs_cmd = "mkdosfs -n efi -C %s %d" % (bootimg, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (bootimg, hdddir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % bootimg
exec_cmd(chmod_cmd)
du_cmd = "du -Lbks %s" % bootimg
out = exec_cmd(du_cmd)
bootimg_size = out.split()[0]
part.size = int(bootimg_size)
part.source_file = bootimg
def do_prepare_partition(self, part, source_params, cr, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
rootfs_dir, native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, prepare content for an EFI (grub) boot partition.
"""
if not bootimg_dir:
bootimg_dir = get_bitbake_var("HDDDIR")
if not bootimg_dir:
msger.error("Couldn't find HDDDIR, exiting\n")
# just so the result notes display it
cr.set_bootimg_dir(bootimg_dir)
staging_kernel_dir = kernel_dir
hdddir = "%s/hdd/boot" % cr_workdir
install_cmd = "install -m 0644 %s/bzImage %s/bzImage" % \
(staging_kernel_dir, hdddir)
exec_cmd(install_cmd)
try:
if source_params['loader'] == 'grub-efi':
shutil.copyfile("%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir,
"%s/grub.cfg" % cr_workdir)
cp_cmd = "cp %s/EFI/BOOT/* %s/EFI/BOOT" % (bootimg_dir, hdddir)
exec_cmd(cp_cmd, True)
shutil.move("%s/grub.cfg" % cr_workdir,
"%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir)
elif source_params['loader'] == 'gummiboot':
cp_cmd = "cp %s/EFI/BOOT/* %s/EFI/BOOT" % (bootimg_dir, hdddir)
exec_cmd(cp_cmd, True)
else:
msger.error("unrecognized bootimg-efi loader: %s" % source_params['loader'])
except KeyError:
msger.error("bootimg-efi requires a loader, none specified")
du_cmd = "du -bks %s" % hdddir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
extra_blocks = part.get_extra_block_count(blocks)
if extra_blocks < BOOTDD_EXTRA_SPACE:
extra_blocks = BOOTDD_EXTRA_SPACE
blocks += extra_blocks
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, part.mountpoint, blocks))
# Ensure total sectors is an integral number of sectors per
# track or mcopy will complain. Sectors are 512 bytes, and we
# generate images with 32 sectors per track. This calculation is
# done in blocks, thus the mod by 16 instead of 32.
blocks += (16 - (blocks % 16))
# dosfs image, created by mkdosfs
bootimg = "%s/boot.img" % cr_workdir
dosfs_cmd = "mkdosfs -n efi -C %s %d" % (bootimg, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (bootimg, hdddir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % bootimg
exec_cmd(chmod_cmd)
du_cmd = "du -Lbks %s" % bootimg
out = exec_cmd(du_cmd)
bootimg_size = out.split()[0]
part.set_size(bootimg_size)
part.set_source_file(bootimg)
def do_prepare_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
rootfs_dir, native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, prepare content for a bootable ISO image.
"""
isodir = "%s/ISO" % cr_workdir
if part.rootfs_dir is None:
if not 'ROOTFS_DIR' in rootfs_dir:
msger.error("Couldn't find --rootfs-dir, exiting.\n")
rootfs_dir = rootfs_dir['ROOTFS_DIR']
else:
if part.rootfs_dir in rootfs_dir:
rootfs_dir = rootfs_dir[part.rootfs_dir]
elif part.rootfs_dir:
rootfs_dir = part.rootfs_dir
else:
msg = "Couldn't find --rootfs-dir=%s connection "
msg += "or it is not a valid path, exiting.\n"
msger.error(msg % part.rootfs_dir)
if not os.path.isdir(rootfs_dir):
rootfs_dir = get_bitbake_var("IMAGE_ROOTFS")
if not os.path.isdir(rootfs_dir):
msger.error("Couldn't find IMAGE_ROOTFS, exiting.\n")
part.rootfs_dir = rootfs_dir
# Prepare rootfs.img
hdd_dir = get_bitbake_var("HDDDIR")
img_iso_dir = get_bitbake_var("ISODIR")
rootfs_img = "%s/rootfs.img" % hdd_dir
if not os.path.isfile(rootfs_img):
rootfs_img = "%s/rootfs.img" % img_iso_dir
if not os.path.isfile(rootfs_img):
# check if rootfs.img is in deploydir
deploy_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
image_name = get_bitbake_var("IMAGE_LINK_NAME")
rootfs_img = "%s/%s.%s" \
% (deploy_dir, image_name, part.fstype)
if not os.path.isfile(rootfs_img):
# create image file with type specified by --fstype
# which contains rootfs
du_cmd = "du -bks %s" % rootfs_dir
out = exec_cmd(du_cmd)
part.size = int(out.split()[0])
part.extra_space = 0
part.overhead_factor = 1.2
part.prepare_rootfs(cr_workdir, oe_builddir, rootfs_dir, \
native_sysroot)
rootfs_img = part.source_file
install_cmd = "install -m 0644 %s %s/rootfs.img" \
% (rootfs_img, isodir)
exec_cmd(install_cmd)
# Remove the temporary file created by part.prepare_rootfs()
if os.path.isfile(part.source_file):
os.remove(part.source_file)
# Prepare initial ramdisk
initrd = "%s/initrd" % hdd_dir
if not os.path.isfile(initrd):
initrd = "%s/initrd" % img_iso_dir
if not os.path.isfile(initrd):
initrd = cls._build_initramfs_path(rootfs_dir, cr_workdir)
install_cmd = "install -m 0644 %s %s/initrd" \
% (initrd, isodir)
exec_cmd(install_cmd)
# Remove the temporary file created by _build_initramfs_path function
if os.path.isfile("%s/initrd.cpio.gz" % cr_workdir):
os.remove("%s/initrd.cpio.gz" % cr_workdir)
# Install bzImage
install_cmd = "install -m 0644 %s/bzImage %s/bzImage" % \
(kernel_dir, isodir)
exec_cmd(install_cmd)
#Create bootloader for efi boot
try:
if source_params['loader'] == 'grub-efi':
# Builds grub.cfg if ISODIR didn't exist or
# didn't contains grub.cfg
bootimg_dir = img_iso_dir
if not os.path.exists("%s/EFI/BOOT" % bootimg_dir):
bootimg_dir = "%s/bootimg" % cr_workdir
if os.path.exists(bootimg_dir):
shutil.rmtree(bootimg_dir)
install_cmd = "install -d %s/EFI/BOOT" % bootimg_dir
exec_cmd(install_cmd)
if not os.path.isfile("%s/EFI/BOOT/boot.cfg" % bootimg_dir):
cls.do_configure_grubefi(part, creator, bootimg_dir)
# Builds bootx64.efi/bootia32.efi if ISODIR didn't exist or
# didn't contains it
target_arch = get_bitbake_var("TARGET_SYS")
if not target_arch:
msger.error("Coludn't find target architecture\n")
if re.match("x86_64", target_arch):
grub_target = 'x86_64-efi'
grub_image = "bootx64.efi"
elif re.match('i.86', target_arch):
grub_target = 'i386-efi'
grub_image = "bootia32.efi"
else:
msger.error("grub-efi is incompatible with target %s\n" \
% target_arch)
if not os.path.isfile("%s/EFI/BOOT/%s" \
% (bootimg_dir, grub_image)):
grub_path = get_bitbake_var("STAGING_LIBDIR")
if not grub_path:
msger.error("Couldn't find STAGING_LIBDIR, exiting.\n")
grub_core = "%s/grub/%s" % (grub_path, grub_target)
if not os.path.exists(grub_core):
msger.info("Building grub-efi...\n")
exec_cmd("bitbake grub-efi")
if not os.path.exists(grub_core):
msger.error("Please build grub-efi first\n")
grub_cmd = "grub-mkimage -p '/EFI/BOOT' "
grub_cmd += "-d %s " % grub_core
grub_cmd += "-O %s -o %s/EFI/BOOT/%s " \
% (grub_target, bootimg_dir, grub_image)
grub_cmd += "part_gpt part_msdos ntfs ntfscomp fat ext2 "
grub_cmd += "normal chain boot configfile linux multiboot "
grub_cmd += "search efi_gop efi_uga font gfxterm gfxmenu "
grub_cmd += "terminal minicmd test iorw loadenv echo help "
grub_cmd += "reboot serial terminfo iso9660 loopback tar "
grub_cmd += "memdisk ls search_fs_uuid udf btrfs xfs lvm "
grub_cmd += "reiserfs ata "
exec_native_cmd(grub_cmd, native_sysroot)
else:
# TODO: insert gummiboot stuff
msger.error("unrecognized bootimg-efi loader: %s" \
% source_params['loader'])
except KeyError:
msger.error("bootimg-efi requires a loader, none specified")
if os.path.exists("%s/EFI/BOOT" % isodir):
shutil.rmtree("%s/EFI/BOOT" % isodir)
shutil.copytree(bootimg_dir+"/EFI/BOOT", isodir+"/EFI/BOOT")
# If exists, remove cr_workdir/bootimg temporary folder
if os.path.exists("%s/bootimg" % cr_workdir):
shutil.rmtree("%s/bootimg" % cr_workdir)
# Create efi.img that contains bootloader files for EFI booting
# if ISODIR didn't exist or didn't contains it
if os.path.isfile("%s/efi.img" % img_iso_dir):
install_cmd = "install -m 0644 %s/efi.img %s/efi.img" % \
(img_iso_dir, isodir)
exec_cmd(install_cmd)
else:
du_cmd = "du -bks %s/EFI" % isodir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
# Add some extra space for file system overhead
blocks += 100
msg = "Added 100 extra blocks to %s to get to %d total blocks" \
% (part.mountpoint, blocks)
msger.debug(msg)
# Ensure total sectors is an integral number of sectors per
# track or mcopy will complain. Sectors are 512 bytes, and we
# generate images with 32 sectors per track. This calculation is
# done in blocks, thus the mod by 16 instead of 32.
blocks += (16 - (blocks % 16))
# dosfs image for EFI boot
bootimg = "%s/efi.img" % isodir
dosfs_cmd = 'mkfs.vfat -n "EFIimg" -S 512 -C %s %d' \
% (bootimg, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mmd_cmd = "mmd -i %s ::/EFI" % bootimg
exec_native_cmd(mmd_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/EFI/* ::/EFI/" \
% (bootimg, isodir)
exec_native_cmd(mcopy_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % bootimg
exec_cmd(chmod_cmd)
# Prepare files for legacy boot
syslinux_dir = get_bitbake_var("STAGING_DATADIR")
if not syslinux_dir:
msger.error("Couldn't find STAGING_DATADIR, exiting.\n")
if os.path.exists("%s/isolinux" % isodir):
shutil.rmtree("%s/isolinux" % isodir)
install_cmd = "install -d %s/isolinux" % isodir
exec_cmd(install_cmd)
cls.do_configure_syslinux(creator, cr_workdir)
install_cmd = "install -m 444 %s/syslinux/ldlinux.sys " % syslinux_dir
install_cmd += "%s/isolinux/ldlinux.sys" % isodir
exec_cmd(install_cmd)
install_cmd = "install -m 444 %s/syslinux/isohdpfx.bin " % syslinux_dir
install_cmd += "%s/isolinux/isohdpfx.bin" % isodir
exec_cmd(install_cmd)
install_cmd = "install -m 644 %s/syslinux/isolinux.bin " % syslinux_dir
install_cmd += "%s/isolinux/isolinux.bin" % isodir
exec_cmd(install_cmd)
install_cmd = "install -m 644 %s/syslinux/ldlinux.c32 " % syslinux_dir
install_cmd += "%s/isolinux/ldlinux.c32" % isodir
exec_cmd(install_cmd)
#create ISO image
iso_img = "%s/tempiso_img.iso" % cr_workdir
iso_bootimg = "isolinux/isolinux.bin"
iso_bootcat = "isolinux/boot.cat"
efi_img = "efi.img"
mkisofs_cmd = "mkisofs -V %s " % part.label
mkisofs_cmd += "-o %s -U " % iso_img
mkisofs_cmd += "-J -joliet-long -r -iso-level 2 -b %s " % iso_bootimg
mkisofs_cmd += "-c %s -no-emul-boot -boot-load-size 4 " % iso_bootcat
mkisofs_cmd += "-boot-info-table -eltorito-alt-boot "
mkisofs_cmd += "-eltorito-platform 0xEF -eltorito-boot %s " % efi_img
mkisofs_cmd += "-no-emul-boot %s " % isodir
msger.debug("running command: %s" % mkisofs_cmd)
exec_native_cmd(mkisofs_cmd, native_sysroot)
shutil.rmtree(isodir)
du_cmd = "du -Lbks %s" % iso_img
out = exec_cmd(du_cmd)
isoimg_size = int(out.split()[0])
part.size = isoimg_size
part.source_file = iso_img
def do_prepare_partition(cls, part, source_params, creator, cr_workdir,
oe_builddir, bootimg_dir, kernel_dir,
rootfs_dir, native_sysroot):
"""
Called to do the actual content population for a partition i.e. it
'prepares' the partition to be incorporated into the image.
In this case, prepare content for legacy bios boot partition.
"""
def _has_syslinux(dirname):
if dirname:
syslinux = "%s/syslinux" % dirname
if os.path.exists(syslinux):
return True
return False
if not _has_syslinux(bootimg_dir):
bootimg_dir = get_bitbake_var("STAGING_DATADIR")
if not bootimg_dir:
msger.error("Couldn't find STAGING_DATADIR, exiting\n")
if not _has_syslinux(bootimg_dir):
msger.error("Please build syslinux first\n")
# just so the result notes display it
creator.set_bootimg_dir(bootimg_dir)
staging_kernel_dir = kernel_dir
hdddir = "%s/hdd/boot" % cr_workdir
install_cmd = "install -m 0644 %s/bzImage-initramfs-genericx86-64.bin %s/vmlinuz" \
% (staging_kernel_dir, hdddir)
exec_cmd(install_cmd)
install_cmd = "install -m 444 %s/syslinux/ldlinux.sys %s/ldlinux.sys" \
% (bootimg_dir, hdddir)
exec_cmd(install_cmd)
du_cmd = "du -bks %s" % hdddir
out = exec_cmd(du_cmd)
blocks = int(out.split()[0])
extra_blocks = part.get_extra_block_count(blocks)
if extra_blocks < BOOTDD_EXTRA_SPACE:
extra_blocks = BOOTDD_EXTRA_SPACE
blocks += extra_blocks
msger.debug("Added %d extra blocks to %s to get to %d total blocks" % \
(extra_blocks, part.mountpoint, blocks))
# Ensure total sectors is an integral number of sectors per
# track or mcopy will complain. Sectors are 512 bytes, and we
# generate images with 32 sectors per track. This calculation is
# done in blocks, thus the mod by 16 instead of 32.
blocks += (16 - (blocks % 16))
# dosfs image, created by mkdosfs
bootimg = "%s/boot.img" % cr_workdir
dosfs_cmd = "mkdosfs -n boot -S 512 -C %s %d" % (bootimg, blocks)
exec_native_cmd(dosfs_cmd, native_sysroot)
mcopy_cmd = "mcopy -i %s -s %s/* ::/" % (bootimg, hdddir)
exec_native_cmd(mcopy_cmd, native_sysroot)
syslinux_cmd = "syslinux %s" % bootimg
exec_native_cmd(syslinux_cmd, native_sysroot)
chmod_cmd = "chmod 644 %s" % bootimg
exec_cmd(chmod_cmd)
du_cmd = "du -Lbks %s" % bootimg
out = exec_cmd(du_cmd)
bootimg_size = out.split()[0]
part.set_size(bootimg_size)
part.set_source_file(bootimg)