def serve(POISON_PILL):
sock_tcp = None
rx_sockets = []
tx_sockets = []
err_sockets = []
while True:
# build a connection if we don't have one. check none specifically. don't make this a complex with
# POISON_PILL -- it's possible we may need to have a listener for clients to drain their buffers
if sock_tcp is None:
sock_tcp = make_server_socket()
try:
# rlist - sockets to try reading; return from select is subset of actually readable (has data in buffer)
# wlist - sockets to try writing to; return from select is subset of actually writable (outbound buffer available)
# xlist - sockets to check for errors; return from select is subset of actually errored
# select is blocking, so give it a timeout
# "server" goes to rlist
# socket to .connect() to clients gets appended into the wlist
# see man select for more details
try:
rx_sockets, tx_sockets, err_sockets = select.select(SOCKET_CONNECTIONS, [], [], API.SOCKET_TIMEOUT_SECONDS)
except KeyboardInterrupt:
POISON_PILL = True
except select.error as e:
log.fatal("Could not select() on sockets. Closing socket. %s " % e)
# break here will jump to the close
break
# Please double-check the logic here
# check for poison pill. bool is very slightly faster than constant int 1 comparison in py3.5
if POISON_PILL:
log.info("Received poison pill for shutdown.")
# if we didn't have any clients between startup and shutdown, rx_sockets will be empty.
if rx_sockets:
for sock in rx_sockets:
try:
sock.shutdown(1)
# give it a little time for the socket to process the shutdown
time.sleep(.2)
sock.close()
except OSError:
# socket probably wasn't connected at .shutdown()
pass
SOCKET_CONNECTIONS.remove(sock)
raise SystemExit('YAMS Socket Server exiting due to a poison pill.')
# to respond to conversation initiated by a client (recv())
for sock in rx_sockets:
if sock == sock_tcp:
# The server socket is responsible for accepting incoming connections and responding with its own client
# connection socket. We know we have a new client conn when data comes into our server socket buffer.
# There shouldn't be an issue with this strategy for select/async with non-blocking sockets, but if so, this
# would be where to dispatch a new thread/native thread
socket_fd, address = sock_tcp.accept()
SOCKET_CONNECTIONS.append(socket_fd)
log.info("Client (%s, %s) connected" % address)
else:
# rx'd from a client
try:
# message from the client here
rx_data = sock.recv(API.SOCKET_RX_BUFFER_BYTES)
# no exception, we have an rx_data
if rx_data:
# todo: process the data. if way too large, disconnect client -- something is wrong..
# socket.send returns the number of bytes sent, so this should go to the metrics gather-er
# sendall returns None on success. there is no way to determine how much data was sent on err, count bytes for tx size
# check for quit messages, evaluate based on the different yams event types
# socket.send returns the number of bytes sent, so this should go to the metrics gather-er
# sendall returns None on success. there is no way to determine how much data was sent on err, count bytes for tx size
if not API.DEBUG:
# 1) Include zlib library and metadata about the request (+= zlib.ZLIB_VERSION)
# e.g. metadata: zlib=1.2.5
# 2) Checksum and store in checksum field (md5 or fletchers? fast, cheap - SSL does the security)
# 3) Compress (zlib.compress())
# 4) Encrypt
# with this order, if there's a corruption over the wire, zlib will see it as corrupted data
# then we'll have the checksum to compare the uncompressed payload against.
pass
# Else: Checksum, store checksum in message
sock.send(bytes_encoder("RECEIVED DATA: %s" % rx_data))
# Probably errored on rx_data -- did something else deplete our buffer?
# this next exception type is an educated guess -- couldn't get timing down for broken socket (e.g. ^c)
except select.error as e:
# Probably fine that the connection is no longer there after initial connection.
# see man 2 accept
log.debug(str(e))
log.warn("Client socket <%s> is not connected." % sock)
# this could be harmless, but could be a sign of unintended clamping of client conns
# just close the conn and then remove it from our candidate FDs. don't bother with .shutdown(), but
# do close explicitly instead of assuming it will get GC'd
sock.close()
try:
log.info("Removing a socket due to a select error.")
SOCKET_CONNECTIONS.remove(sock)
except ValueError:
# sock wasn't in socket_connections. that's what we want, so that's fine.
continue
# to initiate a conversation with a client (connect())
for socket in tx_sockets:
pass
for socket in err_sockets:
pass
if API.DEBUG:
log.debug("rlist: %s" % rx_sockets)
log.debug("wlist: %s" % tx_sockets)
log.debug("xlist: %s" % err_sockets)
time.sleep(API.SOCKET_THREAD_YIELD_EPSILON)
# poll for server shutdown on some interval too. if we reach shutdown, tear down connections from clients
# no longer True, exception raised, or we exited
sock_tcp.close()
def close_socket():
log.debug("Setting poison pill to shut down the socket.")
tcpsocket.POISON_PILL = True
def close_socket():
log.debug("Setting poison pill to shut down the socket.")
tcpsocket.POISON_PILL = True
def serve(POISON_PILL):
sock_tcp = None
rx_sockets = []
tx_sockets = []
err_sockets = []
while True:
# build a connection if we don't have one. check none specifically. don't make this a complex with
# POISON_PILL -- it's possible we may need to have a listener for clients to drain their buffers
if sock_tcp is None:
sock_tcp = make_server_socket()
try:
# rlist - sockets to try reading; return from select is subset of actually readable (has data in buffer)
# wlist - sockets to try writing to; return from select is subset of actually writable (outbound buffer available)
# xlist - sockets to check for errors; return from select is subset of actually errored
# select is blocking, so give it a timeout
# "server" goes to rlist
# socket to .connect() to clients gets appended into the wlist
# see man select for more details
try:
rx_sockets, tx_sockets, err_sockets = select.select(
SOCKET_CONNECTIONS, [], [], API.SOCKET_TIMEOUT_SECONDS)
except KeyboardInterrupt:
POISON_PILL = True
except select.error as e:
log.fatal("Could not select() on sockets. Closing socket. %s " %
e)
# break here will jump to the close
break
# Please double-check the logic here
# check for poison pill. bool is very slightly faster than constant int 1 comparison in py3.5
if POISON_PILL:
log.info("Received poison pill for shutdown.")
# if we didn't have any clients between startup and shutdown, rx_sockets will be empty.
if rx_sockets:
for sock in rx_sockets:
try:
sock.shutdown(1)
# give it a little time for the socket to process the shutdown
time.sleep(.2)
sock.close()
except OSError:
# socket probably wasn't connected at .shutdown()
pass
SOCKET_CONNECTIONS.remove(sock)
raise SystemExit(
'YAMS Socket Server exiting due to a poison pill.')
# to respond to conversation initiated by a client (recv())
for sock in rx_sockets:
if sock == sock_tcp:
# The server socket is responsible for accepting incoming connections and responding with its own client
# connection socket. We know we have a new client conn when data comes into our server socket buffer.
# There shouldn't be an issue with this strategy for select/async with non-blocking sockets, but if so, this
# would be where to dispatch a new thread/native thread
socket_fd, address = sock_tcp.accept()
SOCKET_CONNECTIONS.append(socket_fd)
log.info("Client (%s, %s) connected" % address)
else:
# rx'd from a client
try:
# message from the client here
rx_data = sock.recv(API.SOCKET_RX_BUFFER_BYTES)
# no exception, we have an rx_data
if rx_data:
# todo: process the data. if way too large, disconnect client -- something is wrong..
# socket.send returns the number of bytes sent, so this should go to the metrics gather-er
# sendall returns None on success. there is no way to determine how much data was sent on err, count bytes for tx size
# check for quit messages, evaluate based on the different yams event types
# socket.send returns the number of bytes sent, so this should go to the metrics gather-er
# sendall returns None on success. there is no way to determine how much data was sent on err, count bytes for tx size
if not API.DEBUG:
# 1) Include zlib library and metadata about the request (+= zlib.ZLIB_VERSION)
# e.g. metadata: zlib=1.2.5
# 2) Checksum and store in checksum field (md5 or fletchers? fast, cheap - SSL does the security)
# 3) Compress (zlib.compress())
# 4) Encrypt
# with this order, if there's a corruption over the wire, zlib will see it as corrupted data
# then we'll have the checksum to compare the uncompressed payload against.
pass
# Else: Checksum, store checksum in message
sock.send(bytes_encoder("RECEIVED DATA: %s" % rx_data))
# Probably errored on rx_data -- did something else deplete our buffer?
# this next exception type is an educated guess -- couldn't get timing down for broken socket (e.g. ^c)
except select.error as e:
# Probably fine that the connection is no longer there after initial connection.
# see man 2 accept
log.debug(str(e))
log.warn("Client socket <%s> is not connected." % sock)
# this could be harmless, but could be a sign of unintended clamping of client conns
# just close the conn and then remove it from our candidate FDs. don't bother with .shutdown(), but
# do close explicitly instead of assuming it will get GC'd
sock.close()
try:
log.info("Removing a socket due to a select error.")
SOCKET_CONNECTIONS.remove(sock)
except ValueError:
# sock wasn't in socket_connections. that's what we want, so that's fine.
continue
# to initiate a conversation with a client (connect())
for socket in tx_sockets:
pass
for socket in err_sockets:
pass
if API.DEBUG:
log.debug("rlist: %s" % rx_sockets)
log.debug("wlist: %s" % tx_sockets)
log.debug("xlist: %s" % err_sockets)
time.sleep(API.SOCKET_THREAD_YIELD_EPSILON)
# poll for server shutdown on some interval too. if we reach shutdown, tear down connections from clients
# no longer True, exception raised, or we exited
sock_tcp.close()
