def control_device():
dev = request.args.get('device')
ep = request.args.get('endpoint')
state = request.args.get('state')
try:
cli_instance = ZbCliDevice({'com_port': comport})
#cli_instance.bdb.channel = [16] # channel must be dictionary
# cli_instance.bdb.role = 'zr' # set coordinator role
except serial.serialutil.SerialException:
print('Can not create CLI device')
cli_instance.close_cli()
return None
print("CLI device created, trying to connect ...")
if (state == "on"):
cli_instance.zcl.generic(eui64=int(dev, 16),
ep=int(ep),
cluster=constants.ON_OFF_CLUSTER,
profile=constants.DEFAULT_ZIGBEE_PROFILE_ID,
cmd_id=constants.ON_OFF_ON_CMD,
payload=[])
else:
cli_instance.zcl.generic(eui64=int(dev, 16),
ep=int(ep),
cluster=constants.ON_OFF_CLUSTER,
profile=constants.DEFAULT_ZIGBEE_PROFILE_ID,
cmd_id=constants.ON_OFF_OFF_CMD,
payload=[])
print("set device " + request.args.get('device') + " to " +
request.args.get('state'))
cli_instance.close_cli()
#return '<a href="/index"><button type="button" class="btn btn-primary">Back to devices</button></a>'
return redirect(url_for('index'))
def group_control():
dev = request.args.get('device')
ep = request.args.get('endpoint')
group = request.args.get('group')
add = request.args.get('action')
try:
cli_instance = ZbCliDevice({'com_port': comport})
#cli_instance.bdb.channel = [16] # channel must be dictionary
# cli_instance.bdb.role = 'zr' # set coordinator role
except serial.serialutil.SerialException:
print('Can not create CLI device')
cli_instance.close_cli()
return None
if (add == 'add'):
cli_instance.zcl.generic(eui64=int(dev, 16),
ep=int(ep),
cluster=0x4,
profile=constants.DEFAULT_ZIGBEE_PROFILE_ID,
cmd_id=0x0,
payload=[(int(group,
16), constants.UINT16_TYPE)])
else:
cli_instance.zcl.generic(eui64=int(dev, 16),
ep=int(ep),
cluster=0x4,
profile=constants.DEFAULT_ZIGBEE_PROFILE_ID,
cmd_id=0x3,
payload=[(int(group,
16), constants.UINT16_TYPE)])
cli_instance.close_cli()
return redirect(url_for('info') + '?device=' + dev + '&endpoint=' + ep)
def main():
try:
cli_instance = ZbCliDevice({'com_port': 'COM4'})
#cli_instance.bdb.channel = [16] # channel must be dictionary
#cli_instance.bdb.role = 'zr' # set coordinator role
except serial.serialutil.SerialException:
print('Can not create CLI device')
cli_instance.close_cli()
return None
print("CLI device created, trying to connect ...")
# # Start commissioning.
#cli_instance.bdb.start()
cmd = ""
while cmd != "exit" :
cmd = input("> ")
cmdparts = cmd.split( )
if (cmdparts[0] == "show" or cmdparts[0] == "sh"):
if (cmdparts == "devices"[1] or cmdparts[1] == "dev"):
#zdo match_desc 0xfffd 0xfffd 0x0104 1 0 0
response = cli_instance.zdo.match_desc([], [], 80.0, 0xFFFd, 0xFFFd, 0x0104)
print(response)
elif (cmdparts[0] == "set"):
if (cmdparts[1] == "device" or cmdparts[1] == "dev"):
if(cmdparts[2] == "on"):
cli_instance.zcl.generic(eui64=int(cmdparts[3], 16), ep=int(cmdparts[4]), cluster=constants.ON_OFF_CLUSTER, profile=constants.DEFAULT_ZIGBEE_PROFILE_ID, cmd_id=constants.ON_OFF_ON_CMD, payload=[])
elif (cmdparts[2] == "off"):
cli_instance.zcl.generic(eui64=int(cmdparts[3], 16), ep=int(cmdparts[4]), cluster=constants.ON_OFF_CLUSTER, profile=constants.DEFAULT_ZIGBEE_PROFILE_ID, cmd_id=constants.ON_OFF_OFF_CMD, payload=[])
def index():
# Start commissioning.
# cli_instance.bdb.start()
#response = [(1234, 10)]
try:
cli_instance = ZbCliDevice({'com_port': comport})
#cli_instance.bdb.channel = [16] # channel must be dictionary
# cli_instance.bdb.role = 'zr' # set coordinator role
except serial.serialutil.SerialException:
print('Can not create CLI device')
cli_instance.close_cli()
return None
with open("nodes.txt") as f:
content = f.readlines()
# you may also want to remove whitespace characters like `\n` at the end of each line
content = [x.strip() for x in content]
print(content)
devices = []
for i in range(0, len(content)):
parts = content[i].split('|')
attr = Attribute(cluster=0x6, id=0, type=0)
state = 0
try:
state = cli_instance.zcl.readattr(eui64=int(parts[0], 16),
attr=attr,
ep=int(parts[1])).value
except:
print("couldn't get state")
devices.append((parts[0], parts[1], state))
with open("switches.txt") as f:
content = f.readlines()
# you may also want to remove whitespace characters like `\n` at the end of each line
content = [x.strip() for x in content]
print(content)
groups = []
for i in range(0, len(content)):
parts = content[i].split('|')
groups.append((parts[0], parts[1]))
print(devices)
cli_instance.close_cli()
return render_template('index.html',
nodes=devices,
groups=groups,
grouplen=len(groups),
nodelen=len(devices))
def start_network():
try:
cli_instance = ZbCliDevice({'com_port': comport})
cli_instance.bdb.channel = [20] # channel must be dictionary
cli_instance.bdb.role = 'zc' # set coordinator role
except serial.serialutil.SerialException:
print('Can not create CLI device')
cli_instance.close_cli()
return None
# Start commissioning.
cli_instance.bdb.start()
return redirect(url_for('index'))
def info():
try:
cli_instance = ZbCliDevice({'com_port': comport})
#cli_instance.bdb.channel = [16] # channel must be dictionary
# cli_instance.bdb.role = 'zr' # set coordinator role
except serial.serialutil.SerialException:
print('Can not create CLI device')
cli_instance.close_cli()
return None
dev = request.args.get('device')
ep = request.args.get('endpoint')
state = 'on'
try:
state = cli_instance.zcl.readattr(eui64=int(parts[0], 16),
attr=attr,
ep=int(parts[1])).value
except:
print("couldn't get state")
#cli_instance.zcl.generic(eui64=int(dev, 16), ep=int(ep), cluster=int("0x4", 16), profile=constants.DEFAULT_ZIGBEE_PROFILE_ID, cmd_id=int("0x1", 16), payload=[ ( 0x3333, 0x21)])
with open("switches.txt") as f:
content = f.readlines()
# you may also want to remove whitespace characters like `\n` at the end of each line
content = [x.strip() for x in content]
print(content)
groups = []
for i in range(0, len(content)):
parts = content[i].split('|')
addr = int(parts[0], 16)
addrstr = str('{:x}'.format(addr + 1))
#SwitchFile.write())
groups.append((addrstr, parts[1]))
state = 0
#add_group_form = AddGroupForm
#remove_group_form = RemoveGroupForm
cli_instance.close_cli()
return render_template(
'info.html',
device=dev,
endpoint=ep,
state=state,
groups=groups,
len=len(groups)
) # add_group_form=add_group_form, remove_group_form=remove_group_form)
def refresh():
# a = int("BAF1", 16)
# hexx = str('{:x}'.format(a+ 1))
# print(hexx)
try:
cli_instance = ZbCliDevice({'com_port': comport})
#cli_instance.bdb.channel = [16] # channel must be dictionary
# cli_instance.bdb.role = 'zr' # set coordinator role
except serial.serialutil.SerialException:
print('Can not create CLI device')
cli_instance.close_cli()
return None
#print("CLI device created, trying to connect ...")
#devices = [(4211, 10)]
# devices = cli_instance.zdo.match_desc([6], [], 80.0, 0xFFFd, 0xFFFd, 0x0104)
devices = cli_instance.zdo.match_desc([0], [], 80.0, 0xFFFd, 0xFFFd,
0x0104)
print(devices)
BulbFile = open('nodes.txt', 'w')
SwitchFile = open('switches.txt', 'w')
for element in devices:
if (str(element[1]) == '10'):
BulbFile.write(str(element[0]))
BulbFile.write('|')
BulbFile.write(str(element[1]))
BulbFile.write('\n')
else:
#addr = int(element[0], 16)
#SwitchFile.write(str('{:x}'.format(addr + 1)))
SwitchFile.write(str(element[0]))
SwitchFile.write('|')
SwitchFile.write(str(element[1]))
SwitchFile.write('\n')
BulbFile.close()
SwitchFile.close()
cli_instance.close_cli()
return redirect(url_for('index'))
class ZigBeeDriver():
def __init__(self, port, channel, target_id):
self.target_id = target_id
self.channel = channel
self.port = port
self.cli_instance = ZbCliDevice('', '', port)
self.short = None
self.entry_point = 8
def __del__(self):
self.cli_instance.close_cli()
def get_short_address(self):
try:
self.short = self.cli_instance.zdo.short_addr
return self.short
except CommandError:
print("device was not commissioned")
return -1
def connect(self):
try:
self.cli_instance.bdb.channel = [self.channel]
self.cli_instance.bdb.role = 'zr' # zigbee router
self.cli_instance.bdb.start()
return self.get_short_address()
except SerialTimeoutException:
print("connect failed: {}".format('Write timeout'))
except CommandError: # already connected
try:
self.cli_instance.bdb.start()
except CommandError:
pass
return self.get_short_address()
def disconnect(self):
self.cli_instance.bdb.factory_reset()
self.short = None
return self.get_short_address()
def write_attr_command(self, cmd):
cluster = clusters[cmd['cluster']]
if cluster == ON_OFF_CLUSTER:
cmd_id = commands[cmd['cluster']][cmd['command']]
elif cluster == LVL_CTRL_CLUSTER:
cmd_id = commands[cmd['cluster']][cmd['command']]
elif cluster == COLOR_CTRL_CLUSTER:
cmd_id = commands[cmd['cluster']][cmd['command']]
self.cli_instance.zcl.generic(eui64=self.target_id,
ep=self.entry_point,
profile=DEFAULT_ZIGBEE_PROFILE_ID,
cluster=cluster,
cmd_id=cmd_id,
payload=cmd['payloads'])
try:
time.sleep(cmd['wait'] / 1000) # waiting for the transition
except KeyError:
pass
# @hipiphock
# made to run new command
def new_run_command(self, cluster, taskcmd):
self.cli_instance.zcl.generic(eui64=self.target_id,
ep=self.entry_point,
profile=DEFAULT_ZIGBEE_PROFILE_ID,
cluster=cluster,
cmd_id=taskcmd.id,
payload=taskcmd.payloads)
try:
time.sleep(taskcmd.waittime / 1000)
except KeyError:
pass
def read_attr_command(self, attribute):
try:
result = self.cli_instance.zcl.readattr(self.target_id,
attr=attribute,
ep=self.entry_point)
except CommandError:
print("request Timed out")
return result
def kick():
dev = request.args.get('device')
try:
cli_instance = ZbCliDevice({'com_port': comport})
#cli_instance.bdb.channel = [16] # channel must be dictionary
# cli_instance.bdb.role = 'zr' # set coordinator role
except serial.serialutil.SerialException:
print('Can not create CLI device')
cli_instance.close_cli()
return None
print(dev)
cli_instance.zdo.leave(short_addr=int(dev, 16))
with open("nodes.txt") as f:
content = f.readlines()
# you may also want to remove whitespace characters like `\n` at the end of each line
content = [x.strip() for x in content]
print(content)
devices = []
for i in range(0, len(content)):
parts = content[i].split('|')
attr = Attribute(cluster=0x6, id=0, type=0)
state = 0
try:
state = cli_instance.zcl.readattr(eui64=int(parts[0], 16),
attr=attr,
ep=int(parts[1])).value
except:
print("couldn't get state")
if (parts[0] != dev):
devices.append((parts[0], parts[1], state))
with open("switches.txt") as f:
content = f.readlines()
# you may also want to remove whitespace characters like `\n` at the end of each line
content = [x.strip() for x in content]
print(content)
groups = []
for i in range(0, len(content)):
parts = content[i].split('|')
if (parts[0] != dev):
devices.append((parts[0], parts[1]))
BulbFile = open('nodes.txt', 'w')
SwitchFile = open('switches.txt', 'w')
for element in devices:
if (str(element[1]) == '10'):
BulbFile.write(str(element[0]))
BulbFile.write('|')
BulbFile.write(str(element[1]))
BulbFile.write('\n')
else:
#addr = int(element[0], 16)
#SwitchFile.write(str('{:x}'.format(addr + 1)))
SwitchFile.write(str(element[0]))
SwitchFile.write('|')
SwitchFile.write(str(element[1]))
SwitchFile.write('\n')
BulbFile.close()
SwitchFile.close()
cli_instance.close_cli()
return redirect(url_for('index'))
def start_routine(self):
status = 1
# Before connecting the device with the dongle,
# the dongle must join the hub's network.
# TODO: implement automated port selector
# with open('resource\\dongle_status.json', "r") as dongle_file:
# dongle_config = json.load(dongle_file)
# port = dongle_config['port']
# status = dongle_config['status']
# dongle_file.close()
time.sleep(3)
cli_instance = ZbCliDevice('', '', self.port)
if status == 0:
cli_instance.bdb.channel = [24]
cli_instance.bdb.role = 'zr'
cli_instance.bdb.start()
# TODO: change the directory's path
with open('resource\\dongle_status.json', "w") as dongle_file:
dongle_config['status'] = 1
json.dump(dongle_config, dongle_file)
dongle_file.close()
print("The dongle has started commissioning.")
print(
"Please search for the dongle via SmartThings App within 5 seconds."
)
time.sleep(5.0)
# zblogger = ZigbeeLogger()
# log_file_name = zblogger.log_init()
# 1. Start connection with the device.
# The connection of the device is ruled by SmartThings hub.
# do the task_list
for i in range(self.iteration):
for task in self.task_list:
if task.task_kind == COMMAND_TASK:
if task.payloads == None:
cli_instance.zcl.generic(
eui64=self.device.addr,
ep=self.device.ep,
profile=DEFAULT_ZIGBEE_PROFILE_ID,
cluster=task.cluster,
cmd_id=task.command)
else:
cli_instance.zcl.generic(
eui64=self.device.addr,
ep=self.device.ep,
profile=DEFAULT_ZIGBEE_PROFILE_ID,
cluster=task.cluster,
cmd_id=task.command,
payload=task.payloads)
time.sleep(task.duration)
attr_id, attr_type = get_attr_element(
task.cluster, task.command)
param_attr = Attribute(task.cluster, attr_id, attr_type)
returned_attr = cli_instance.zcl.readattr(
self.device.addr,
param_attr,
ep=ULTRA_THIN_WAFER_ENDPOINT)
# zblogger.get_command_log(task)
elif task.task_kind == READ_ATTRIBUTE_TASK:
param_attr = Attribute(task.cluster, task.attr_id,
task.attr_type)
returned_attr = cli_instance.zcl.readattr(
self.device.addr,
param_attr,
ep=ULTRA_THIN_WAFER_ENDPOINT)
zblogger.get_read_attr_log(task, returned_attr.value)
elif task.task_kind == WRITE_ATTRIBUTE_TASK:
param_attr = Attribute(task.cluster, task.attr_id,
task.attr_type)
cli_instance.zcl.writeattr(self.device.addr,
param_attr,
ep=ULTRA_THIN_WAFER_ENDPOINT)
returned_attr = cli_instance.zcl.readattr(
self.device.addr,
param_attr,
ep=ULTRA_THIN_WAFER_ENDPOINT)
zblogger.get_read_attr_log(task, returned_attr.value)
# # each task routine ends with disconnection
# zblogger.close_logfile()
cli_instance.close_cli()
def start_routine(self):
if self.connection_type == ZIGBEE_CONNECTION:
# Before connecting the device with the dongle,
# the dongle must join the hub's network.
# TODO: implement automated port selector
with open('resource\\dongle_status.json', "r") as dongle_file:
dongle_config = json.load(dongle_file)
port = dongle_config['port']
status = dongle_config['status']
dongle_file.close()
time.sleep(3)
cli_instance = ZbCliDevice('', '', port)
if status == 0:
cli_instance.bdb.channel = [24]
cli_instance.bdb.role = 'zr'
cli_instance.bdb.start()
# TODO: change the directory's path
with open('resource\\dongle_status.json', "w") as dongle_file:
dongle_config['status'] = 1
json.dump(dongle_config, dongle_file)
dongle_file.close()
print("The dongle has started commissioning.")
print(
"Please search for the dongle via SmartThings App within 5 seconds."
)
time.sleep(5.0)
zblogger = ZigbeeLogger()
zblogger.log_init()
# 1. Start connection with the device.
# The connection of the device is ruled by SmartThings hub.
# do the task_list
for i in range(self.iteration):
for task in self.task_list:
if task.task_kind == COMMAND_TASK:
if task.payloads == None:
cli_instance.zcl.generic(
eui64=self.device.addr,
ep=self.device.ep,
profile=DEFAULT_ZIGBEE_PROFILE_ID,
cluster=task.cluster,
cmd_id=task.command)
else:
cli_instance.zcl.generic(
eui64=self.device.addr,
ep=self.device.ep,
profile=DEFAULT_ZIGBEE_PROFILE_ID,
cluster=task.cluster,
cmd_id=task.command,
payload=task.payloads)
time.sleep(task.duration)
# TODO: change code like
# 1. create READ_ATTR task with respect to Cmd task
# 2. append READ_ATTR task to task_list
attr_id, attr_type = get_attr_element(
task.cluster, task.command)
param_attr = Attribute(task.cluster, attr_id,
attr_type)
returned_attr = cli_instance.zcl.readattr(
self.device.addr,
param_attr,
ep=ULTRA_THIN_WAFER_ENDPOINT)
zblogger.get_command_log(task)
elif task.task_kind == READ_ATTRIBUTE_TASK:
param_attr = Attribute(task.cluster, task.attr_id,
task.attr_type)
returned_attr = cli_instance.zcl.readattr(
self.device.addr,
param_attr,
ep=ULTRA_THIN_WAFER_ENDPOINT)
zblogger.get_read_attr_log(task, returned_attr.value)
time.sleep(task.duration)
elif task.task_kind == WRITE_ATTRIBUTE_TASK:
param_attr = Attribute(task.cluster, task.attr_id,
task.attr_type)
cli_instance.zcl.writeattr(
self.device.addr,
param_attr,
ep=ULTRA_THIN_WAFER_ENDPOINT)
returned_attr = cli_instance.zcl.readattr(
self.device.addr,
param_attr,
ep=ULTRA_THIN_WAFER_ENDPOINT)
zblogger.get_read_attr_log(task, returned_attr.value)
time.sleep(task.duration)
# # each task routine ends with disconnection
zblogger.close_logfile()
cli_instance.close_cli()
################# BLE Tasks ###################
# Four steps for BLE
# 1. Device scan
# Device scan is done by BleDevice. It searches for BLE device and gets GATT
# 2. Connect to device
# It is mainly done by Peer.
# 3. Read services and characteristics
# Again, it is done by BleDevice
# 4. Read and write characteristics
#
elif self.connection_type == BLE_CONNECTION:
pass