def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
# 波形の定義
i_wave_0 = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SINE,
frequency = 120.0,
phase = 0,
amplitude = 15000,
num_cycles = 2500)
q_wave_0 = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SQUARE,
frequency = 120.0,
phase = 0,
amplitude = 15000,
duty_cycle = 100.0,
num_cycles = 2500)
iq_wave_0 = awgsa.AwgIQWave(i_wave_0, q_wave_0)
i_wave_1 = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SINE,
frequency = 50.0,
phase = 90.0, # cos
amplitude = 15000,
duty_cycle = 100.0,
num_cycles = 2500)
q_wave_1 = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SINE,
frequency = 50.0,
phase = 0,
amplitude = 15000,
num_cycles = 2500)
iq_wave_1 = awgsa.AwgIQWave(i_wave_1, q_wave_1)
# 波形シーケンスの作成
wave_sequence_0 = (awgsa.WaveSequence(DAC_FREQ, is_iq_data = True)
.add_step(step_id = 0, wave = iq_wave_0, post_blank = 2000))
wave_sequence_1 = (awgsa.WaveSequence(DAC_FREQ, is_iq_data = True)
.add_step(step_id = 0, wave = iq_wave_1, post_blank = 2000))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_0, wave_sequence_0)
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_1, wave_sequence_1)
return (wave_sequence_0, wave_sequence_1)
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
# 波形の定義
samples = create_wave()
wave_0 = awgsa.AwgAnyWave(samples=samples, num_cycles=4)
(i_samples, q_samples) = create_iq_wave()
i_wave = awgsa.AwgAnyWave(samples=i_samples, num_cycles=360)
q_wave = awgsa.AwgAnyWave(samples=q_samples, num_cycles=360)
wave_1 = awgsa.AwgIQWave(i_wave, q_wave)
# 波形シーケンスの定義
# 波形ステップの開始から終了までの期間は, キャプチャの終了処理にかかるオーバーヘッドを考慮し, 波形出力期間 + 2000 ns を設定する.
wave_sequence_0 = (awgsa.WaveSequence(DAC_FREQ, is_iq_data=False).add_step(
step_id=0, wave=wave_0, post_blank=2000))
wave_sequence_1 = (awgsa.WaveSequence(DAC_FREQ, is_iq_data=True).add_step(
step_id=0, wave=wave_1, post_blank=2000))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_0,
wave_sequence_0,
num_repeats=1)
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_1,
wave_sequence_1,
num_repeats=1)
return (wave_sequence_0, wave_sequence_1)
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
awg_id_to_wave_sequence = {}
for awg_id in awg_list:
# 波形の定義
num_cycles = int(6.0 * awg_to_freq[awg_id]) # 6.0[us]
i_wave = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SINE,
frequency = awg_to_freq[awg_id],
phase = 90, # cos
amplitude = 15000,
num_cycles = num_cycles)
q_wave = awgsa.AwgWave(
wave_type = awgsa.AwgWave.SINE,
frequency = awg_to_freq[awg_id],
phase = 0,
amplitude = 15000,
num_cycles = num_cycles)
iq_wave = awgsa.AwgIQWave(i_wave, q_wave)
# 波形シーケンスの定義
# 波形ステップの開始から終了までの期間は, キャプチャの終了処理にかかるオーバーヘッドを考慮し, 波形出力期間 + 2000 ns を設定する.
wave_sequence = (awgsa.WaveSequence(DAC_FREQ, is_iq_data = True)
.add_step(step_id = 0, wave = iq_wave, post_blank = 2000))
# AWG に波形シーケンスをセットする
awg_sa_cmd.set_wave_sequence(awg_id = awg_id, wave_sequence = wave_sequence, num_repeats = 1)
awg_id_to_wave_sequence[awg_id] = wave_sequence
return awg_id_to_wave_sequence
def set_wave_sequence(awg_sa_cmd):
"""
波形シーケンスを AWG にセットする
"""
wave_0 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SINE,
frequency=10.0,
phase=0,
amplitude=20000,
num_cycles=3)
wave_1 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SAWTOOTH,
frequency=15.0,
phase=0.0,
amplitude=10000,
offset=0,
crest_pos=0.5,
num_cycles=3)
wave_2 = awgsa.AwgWave(wave_type=awgsa.AwgWave.SQUARE,
frequency=10.0,
phase=0.0,
amplitude=10000,
offset=0,
duty_cycle=50.0,
num_cycles=3)
wave_3 = awgsa.AwgWave(wave_type=awgsa.AwgWave.GAUSSIAN,
frequency=10.0,
phase=0.0,
amplitude=8000,
offset=0,
domain_begin=-4.0,
domain_end=4.0,
variance=0.2,
num_cycles=2)
wave_4 = awgsa.AwgIQWave(wave_0, wave_1)
wave_5 = awgsa.AwgIQWave(wave_1, wave_2)
wave_6 = awgsa.AwgIQWave(wave_2, wave_0)
wave_sequence_0 = (awgsa.WaveSequence(DAC_FREQ).add_step(
step_id=0, wave=wave_0, post_blank=2000).add_step(
step_id=1, wave=wave_1,
post_blank=1500).add_step(step_id=2, wave=wave_2,
post_blank=0).add_step(step_id=3,
wave=wave_3,
post_blank=3000))
wave_sequence_1 = (awgsa.WaveSequence(DAC_FREQ, is_iq_data=True).add_step(
step_id=0, wave=wave_4,
post_blank=1000).add_step(step_id=1, wave=wave_5,
post_blank=2000).add_step(step_id=2,
wave=wave_6,
post_blank=1500))
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_0,
wave_sequence_0,
num_repeats=1)
awg_sa_cmd.set_wave_sequence(awgsa.AwgId.AWG_1,
wave_sequence_1,
num_repeats=1)
return (wave_sequence_0, wave_sequence_1)