def append(self, objName, callerName, fn, data=None): #, events='all'
'''
Run fn(data) whenever objName is deleted (by now)
if no data, fs() is called
if the object 'callerName' is deleted, this listener stop listening for it but it remains working for all other callers
'''
# TODO: generate a list for each kind of event
#events = events if type(events) is list else [events]
if not objName in self.lines:
self.lines[objName] = []
self.lines[objName].append((fn, data, callerName))
FreeCAD.addDocumentObserver(self)
def _resume():
"""do not call! resume a suspend by calling .release method on keeper object returned by suspend."""
global suspend_counter
if suspend_counter == 0: return
suspend_counter -= 1
if suspend_counter == 0:
App.addDocumentObserver(observerInstance)
def __init__(self, command, source_container):
self.defineAttributes()
self.command = command
command.waiter = self
self.source_container = source_container
App.addDocumentObserver(
self) #this will call slotCreatedObject, eventually...
def _resume():
"""do not call! resume a suspend by calling .release method on keeper object returned by suspend."""
global suspend_counter
if suspend_counter == 0: return
suspend_counter -= 1
if suspend_counter == 0:
App.addDocumentObserver(observerInstance)
def create(doc, callback):
'''
Creation method for _Document class
'''
if _saveObserver.instance() is None:
App.addDocumentObserver(_saveObserver(doc))
else:
_saveObserver.instance().set_document(doc)
def Activated(self):
try:
import WorkingPlane
from plane import Grid as gr
from plane import DocObserver
if (self.myDocObserver is None):
self.myDocObserver = DocObserver()
self.myDocObserver.setLink(self)
App.addDocumentObserver(self.myDocObserver)
if not (App.ActiveDocument):
App.newDocument()
Gui.ActiveDocument.ActiveView.setCameraType("Perspective")
# FROM DRAFT
if hasattr(FreeCADGui, "draftToolBar"):
Gui.draftToolBar.Activated()
if hasattr(FreeCADGui, "Snapper"):
Gui.Snapper.show()
import draftutils.init_draft_statusbar as dsb
dsb.show_draft_statusbar()
# Fix the view of the grid make it as 123D Design
App.DraftWorkingPlane.alignToPointAndAxis(
App.Vector(0.0, 0.0, 0.0), App.Vector(0, 0, 1), 0.0)
# Show the Grid always
# g=gridTracker()
v = Gui.ActiveDocument.ActiveView
# New plane axis 2021-03-22
if (self.planeShow is None):
self.planeShow = gr(v)
self.planeShow.Activated()
# g.ff() #draft Grid --> I will try to remove it in the future Mariwan 2021-03-22
# Show Top view - Isometric always
if self.runOnce == True:
Gui.ActiveDocument.activeView().viewTop()
Gui.activeDocument().activeView().viewIsometric()
# Gui.SendMsgToActiveView("ViewFit")
for TT in range(1, 10):
Gui.ActiveDocument.ActiveView.zoomOut()
self.runOnce = False
App.Console.PrintLog(
"Draft workbench activated Inside Design456.\n")
# Turn OFF grid #TODO:Make This permanent
Gui.Snapper.grid.off()
App.Console.PrintMessage('Design456 workbench loaded\n')
return
except Exception as err:
App.Console.PrintError("'Error: Design456 activation' Failed.\n"
"Design456 will not work as expected.\n "
"{err}\n".format(err=str(err)))
exc_type, exc_obj, exc_tb = sys.exc_info()
fname = os.path.split(exc_tb.tb_frame.f_code.co_filename)[1]
print(exc_type, fname, exc_tb.tb_lineno)
def get(doc):
'''
Factory method to create an observer attached to doc
If already created, return it
'''
if not doc in ProjectObserver.docs:
print('building new observer')
ProjectObserver.docs[doc] = ProjectObserver(doc)
App.addDocumentObserver(ProjectObserver.docs[doc])
return ProjectObserver.docs[doc]
def start():
global observerInstance
if observerInstance is not None:
return
observerInstance = Observer()
App.addDocumentObserver(observerInstance)
global timer
from PySide import QtCore
timer = QtCore.QTimer()
timer.setInterval(300)
timer.connect(QtCore.SIGNAL("timeout()"), observerInstance.poll)
def get(doc):
"""
Factory method to create an observer attached to doc
If already created, return it
"""
if not doc in ProjectObserver.docs:
ProjectObserver.docs[doc] = ProjectObserver(doc)
App.addDocumentObserver(ProjectObserver.docs[doc])
return ProjectObserver.docs[doc]
def makeObject(doc, type_id, name):
import FreeCAD
obs = Observer(doc)
FreeCAD.addDocumentObserver(obs)
try:
obj = doc.addObject(type_id, name)
finally:
FreeCAD.removeDocumentObserver(obs)
#some objects add extra objects automatically (e.g. Part makes an Origin). Can't prevent their creation. But can delete.
for n in obs.new_objects:
if n != obj.Name:
doc.removeObject(n)
return obj
def addObserver():
"""
Adds an `AnimateDocumentObserver` between FreeCAD's document observers safely.
It's preferred to add an `AnimateDocumentObserver` using this method, because
other ways could result in having multiple document observers added to FreeCAD.
Having a lot of document observers slows down FreeCAD due to necessity to
inform them all about imminent changes and so on.
"""
# Check FreeCAD doesn't have an AnimateDocumentObserver already assigned
# and assign one
if not hasattr(FreeCAD, "animate_observer"):
FreeCAD.animate_observer = AnimateDocumentObserver()
FreeCAD.addDocumentObserver(FreeCAD.animate_observer)
def onStart():
"""Start the cube menu."""
start = False
try:
mw.mainWindowClosed
start = True
except AttributeError:
pass
if start:
t.stop()
t.deleteLater()
accessoriesMenu()
mw.mainWindowClosed.connect(onClose)
observer = DocumentObserver()
App.addDocumentObserver(observer)
def initialize(docManager):
global __Observer
#we only initialize ones
if __Observer:
return
#add the freecad observer
__observer = __DocumentObserver(docManager)
__guiObserver = __GUIDocumentObserver(docManager)
FreeCAD.addDocumentObserver(__observer)
FreeCADGui.addDocumentObserver(__guiObserver)
__Observer = __ObserverManager(__guiObserver, __observer)
def start():
global observerInstance
if observerInstance is not None:
return
observerInstance = Observer()
App.addDocumentObserver(observerInstance)
global timer
from PySide import QtCore
timer = QtCore.QTimer()
timer.setInterval(300)
timer.connect(QtCore.SIGNAL("timeout()"), observerInstance.poll)
timer.start()
global suspend_counter
suspend_counter = 0
def __init__(self):
FreeCAD.addDocumentObserver(self)
def addObserver():
# Check FreeCAD doesn't have an AnimateDocumentObserver already assigned
# and assign one
if not hasattr(FreeCAD, "animate_observer"):
FreeCAD.animate_observer = AnimateDocumentObserver()
FreeCAD.addDocumentObserver(FreeCAD.animate_observer)
def Activated(self):
FreeCAD.addDocumentObserver(self.docObserver)
from .gui import AsmCmdManager
for cmd in AsmCmdManager.getInfo().Types:
cmd.workbenchActivated()
def attach(cls):
if cls._instance is None:
cls._instance = cls()
App.addDocumentObserver(cls._instance)
def Activated(self):
import a2p_observers
FreeCAD.addDocumentObserver(a2p_observers.redoUndoObserver)
def Activated(self):
"This function is executed when the workbench is activated"
print("Activated")
self.obs = self.MyObserver()
FreeCAD.addDocumentObserver(self.obs)
return
Since they have the same names nothing needs to be done. This method is optional"""
return mode
def __getstate__(self):
""" When saving the document this object gets stored using Python's json module.\'
Since we have some un-serializable parts here -- the Coin stuff -- we must define this method\'
to return a tuple of all serializable objects or None."""
return None
def __setstate__(self, state):
""" When restoring the serialized object from document we have the chance to set some internals here.\'
Since no data were serialized nothing needs to be done here."""
return None
FreeCAD.addDocumentObserver(Parameter)
def createParameter():
a = FreeCAD.ActiveDocument.addObject("App::FeaturePython", "Parameter")
Parameter(a)
ViewProviderParameter(a.ViewObject)
return a
def makeParameter():
FreeCAD.newDocument()
FreeCADGui.activateWorkbench("PartWorkbench")
FreeCAD.ActiveDocument.addObject("Part::Box", "Box")
createParameter()
def attach(cls):
if cls._instance is None:
cls._instance = cls()
App.addDocumentObserver(cls._instance)
updateAllGhosts(feature.Document)
elif prop_name == 'Placement':
if not Containers.isContainer(feature):
return
if 'Restore' in feature.State:
return
onContainerPlacementChanged(feature)
#stop old observer, if reloading this module
if 'observer' in vars():
App.removeDocumentObserver(observer)
observer = None
#start obsrever
observer = Observer()
App.addDocumentObserver(observer)
def updateAllGhosts(doc):
for obj in doc.Objects:
if not hasattr(obj, 'Proxy'):
continue
if hasattr(obj.Proxy, 'updateDeps'):
try:
obj.Proxy.updateDeps(obj)
except Exception as err:
App.Console.PrintError(
u"Updating dependencies of ghost '{obj}' failed:\n {err}\n"
.format(err=str(err), obj=obj.Label))
def __init__(self, command, source_container):
self.defineAttributes()
self.command = command
command.waiter = self
self.source_container = source_container
App.addDocumentObserver(self) #this will call slotCreatedObject, eventually...
def StartKneeSimulation(): StopKneeSimulation() _calculateKnees() _calculateSwivels() FreeCAD.kneeObserver=KneeObserver() FreeCAD.addDocumentObserver(FreeCAD.kneeObserver)
