def Misc():
print("--------------------------------------------")
print("Misc")
print("--------------------------------------------")
print("1. CP50 Spurious Response full scan")
print("2. CP50 ACS full scan")
print("3. Occupied_bandwidth")
print("4. Screenshot")
print("5. Tx Result transfer")
print("6. Rx Result transfer")
print("7. Go back to last menu")
print("0. Quit")
while True:
choice = input("> ")
if choice == "1":
Module.CHSW_SR()
Misc()
elif choice == "2":
Module.CHSW_ACS()
Misc()
elif choice == "3":
Module.Tx_Occupied_bandwidth(472.025, "top")
Module.Tx_Occupied_bandwidth(472.1, "bottom")
elif choice == "4":
filename = input("input filename > ")
Module.FSV.screenshot(filename)
Misc()
elif choice == "5":
filename = input(
"input filename where Tx result will be saved: > ")
Module.copy_excel(to_file=filename,
sheet_list=[
'Ferror_Pow', 'ACP', 'Cond_Spur_CB',
'Cond_Spur_3', 'Cond_Spur_2', 'Cond_Spur_1',
'Max_Dev_3', 'Max_Dev_2', 'Max_Dev_1',
'OOB_CB', 'Max_Dev_CB'
])
Misc()
elif choice == "6":
filename = input(
"input filename where Rx result will be saved: > ")
Module.copy_excel(to_file=filename,
sheet_list=[
'ACS', 'CCR', 'MUS', 'Blocking', 'Spur_Res',
'Intermodulation_Response'
])
Misc()
elif choice == "7":
start()
elif choice == "0":
Module.FSV.close()
Module.SML.close()
Module.SMB.close()
Module.SMC.close()
Module.CMS.close()
exit(0)
else:
print("please enter number within the range from 0 to 2.")
def ANZ4295():
print("--------------------------------------------")
print("ASNZS4295:2015")
print("--------------------------------------------")
print("1. Tx-Frequency error_Carrier power")
print("2. Tx-Max deviation")
print("3. Tx-Adjacent channel power")
print("4. Tx-Conducted spurious emissions")
print("5. Rx-Adjacent channel selectivity")
print("6. Rx-Spurious response immunity ")
print("7. Rx-Blocking immunity")
print("8. Run all Tx test on standard required channels")
print("9. Run all Rx test on standard required channels")
print("10. Go back to last menu")
print("0. Quit")
while True:
choice = input("> ")
if choice == "1":
config.test_frequency = input("input test frequency in MHz > ")
Module.SW1.Switch_to_Ax(1)
Module.CHSW_FEP(config.test_frequency,
start_row=0,
end_row=1,
clear=1)
ANZ4295()
elif choice == "2":
config.test_frequency = input("input test frequency in MHz > ")
Module.SW1.Switch_to_Ax(1)
Module.Tx_Max_deviation(config.test_frequency, sheet="Max_Dev_1")
ANZ4295()
elif choice == "3":
config.test_frequency = input("input test frequency in MHz > ")
Module.SW1.Switch_to_Ax(1)
Module.CHSW_ACP(config.test_frequency,
start_row=0,
end_row=1,
clear=1)
ANZ4295()
elif choice == "4":
config.test_frequency = input("input test frequency in MHz > ")
saved_sheet = input(
"input sheet the result to be saved\n for example: Cond_Spur_1/2/3 > "
)
Module.SW1.Switch_to_Ax(1)
Module.Tx_Conducted_spurious_emissions(config.test_frequency,
sheet=str(saved_sheet),
clear=0)
ANZ4295()
elif choice == "5":
config.test_frequency = input("input test frequency in MHz > ")
Module.SW1.Switch_to_Ax(2)
Module.CHSW_ACS(config.test_frequency,
start_row=0,
end_row=1,
clear=1)
ANZ4295()
elif choice == "6":
config.test_frequency = input("input test frequency in MHz > ")
Module.SW1.Switch_to_Ax(2)
Module.CHSW_SR(config.test_frequency,
start_row=0,
end_row=1,
clear=1)
ANZ4295()
elif choice == "7":
config.test_frequency = input("input test frequency in MHz > ")
Module.SW1.Switch_to_Ax(2)
Module.CHSW_BLK(config.test_frequency,
start_row=0,
end_row=1,
clear=1)
ANZ4295()
elif choice == "8":
Module.SW1.Switch_to_Ax(1)
Module.CHSW_FEP(459.075, start_row=0, end_row=1,
clear=1) # clear sheet in first run
Module.CHSW_FEP(498.700, start_row=1, end_row=2, clear=0)
Module.CHSW_FEP(519.200, start_row=2, end_row=3, clear=0)
Module.Tx_Max_deviation(459.075, sheet="Max_Dev_1")
Module.Tx_Max_deviation(498.700, sheet="Max_Dev_2")
Module.Tx_Max_deviation(519.200, sheet="Max_Dev_3")
Module.CHSW_ACP(459.075, start_row=0, end_row=1,
clear=1) # clear sheet in first run
Module.CHSW_ACP(498.700, start_row=1, end_row=2, clear=0)
Module.CHSW_ACP(519.200, start_row=2, end_row=3, clear=0)
ANZ4295()
elif choice == "9":
Module.SW1.Switch_to_Ax(2)
Module.CHSW_ACS(459.075, start_row=0, end_row=1,
clear=1) # clear sheet in first run
Module.CHSW_ACS(498.700, start_row=1, end_row=2, clear=0)
Module.CHSW_ACS(519.200, start_row=2, end_row=3, clear=0)
Module.CHSW_SR(459.075, start_row=0, end_row=1, clear=1)
Module.CHSW_SR(498.700, start_row=1, end_row=2, clear=0)
Module.CHSW_SR(519.200, start_row=2, end_row=3, clear=0)
Module.CHSW_BLK(459.075, start_row=0, end_row=1, clear=1)
Module.CHSW_BLK(498.700, start_row=1, end_row=2, clear=0)
Module.CHSW_BLK(519.200, start_row=2, end_row=3, clear=0)
ANZ4295()
elif choice == "10":
start()
elif choice == "0":
Module.FSV.close()
Module.SML.close()
Module.SMB.close()
Module.SMC.close()
Module.CMS.close()
exit(0)
else:
print("please enter number within the range from 0 to 8.")
