def __revertSelectedPolygon(self, nb):
for item in self.__getIterator(True):
item.includeMode = not item.includeMode
if item.includeMode: pixmap = Icons.load('Plus2')
else: pixmap = Icons.load('Minus2')
item.setPixmap(0, pixmap)
self.__setRegion()
def __init__(self, *args):
MotorSpinBoxBrick.MotorSpinBoxBrick.__init__(self, *args)
self.wagoLight = None
self.lightSavedPosition = None
self.addProperty('wagolight', 'string', '')
self.addProperty('wagoicons', 'string', '')
self.addProperty('out_delta', 'string', '')
self.lightOffButton = QPushButton("0", self.extraButtonsBox)
self.lightOffButton.setPixmap(Icons.load('far_left'))
self.connect(self.lightOffButton, SIGNAL('clicked()'),
self.lightButtonOffClicked)
self.lightOnButton = QPushButton("1", self.extraButtonsBox)
self.lightOnButton.setPixmap(Icons.load('far_right'))
self.connect(self.lightOnButton, SIGNAL('clicked()'),
self.lightButtonOnClicked)
self.spinBox.close()
self.stepButton.close()
self.stopButton.close()
QToolTip.add(self.lightOffButton,
"Switches off the light and sets the intensity to zero")
QToolTip.add(
self.lightOnButton,
"Switches on the light and sets the intensity back to the previous setting"
)
#self.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
self.lightOffButton.setSizePolicy(QSizePolicy.Fixed,
QSizePolicy.Minimum)
self.lightOnButton.setSizePolicy(QSizePolicy.Fixed,
QSizePolicy.Minimum)
def __init__(self, *args):
MotorSpinBoxBrick.MotorSpinBoxBrick.__init__(self, *args)
self.wagoLight =None
self.lightSavedPosition=None
self.addProperty('wagolight', 'string', '')
self.addProperty('wagoicons', 'string', '')
self.addProperty('out_delta', 'string', '')
self.lightOffButton=QPushButton("0",self.extraButtonsBox)
self.lightOffButton.setPixmap(Icons.load('far_left'))
self.connect(self.lightOffButton,SIGNAL('clicked()'),self.lightButtonOffClicked)
self.lightOnButton=QPushButton("1",self.extraButtonsBox)
self.lightOnButton.setPixmap(Icons.load('far_right'))
self.connect(self.lightOnButton,SIGNAL('clicked()'),self.lightButtonOnClicked)
self.spinBox.close()
self.stepButton.close()
self.stopButton.close()
QToolTip.add(self.lightOffButton,"Switches off the light and sets the intensity to zero")
QToolTip.add(self.lightOnButton,"Switches on the light and sets the intensity back to the previous setting")
#self.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
self.lightOffButton.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Minimum)
self.lightOnButton.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Minimum)
def __init__(self, *args):
MotorSpinBoxBrick.MotorSpinBoxBrick.__init__(self, *args)
self.actuatorLight = None
self.lightSavedPosition = None
self.addProperty("actuatorlight", "string", "")
self.addProperty("actuatoricons", "string", "")
self.addProperty("out_delta", "string", "")
self.lightOffButton = QPushButton("0", self.extraButtonsBox)
self.lightOffButton.setPixmap(Icons.load("far_left"))
self.connect(
self.lightOffButton, SIGNAL("clicked()"), self.lightButtonOffClicked
)
self.lightOnButton = QPushButton("1", self.extraButtonsBox)
self.lightOnButton.setPixmap(Icons.load("far_right"))
self.connect(self.lightOnButton, SIGNAL("clicked()"), self.lightButtonOnClicked)
self.spinBox.close()
self.stepButton.close()
self.stopButton.close()
QToolTip.add(
self.lightOffButton, "Switches off the light and sets the intensity to zero"
)
QToolTip.add(
self.lightOnButton,
"Switches on the light and sets the intensity back to the previous setting",
)
# self.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
self.lightOffButton.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Minimum)
self.lightOnButton.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Minimum)
def propertyChanged(self, propertyName, oldValue, newValue):
if propertyName == "ldapServer":
self.ldapConnection = self.getHardwareObject(newValue)
elif propertyName == "codes":
self.setCodes(newValue)
elif propertyName == "localLogin":
self.localLogin = self.getHardwareObject(newValue)
elif propertyName == "dbConnection":
self.dbConnection = self.getHardwareObject(newValue)
logging.getLogger().info("dbconnection is %s", str(newValue))
self.updateLoginID()
elif propertyName == "instanceServer":
if self.instanceServer is not None:
self.disconnect(self.instanceServer, PYSIGNAL("passControl"), self.passControl)
self.disconnect(self.instanceServer, PYSIGNAL("haveControl"), self.haveControl)
self.instanceServer = self.getHardwareObject(newValue)
if self.instanceServer is not None:
self.connect(self.instanceServer, PYSIGNAL("passControl"), self.passControl)
self.connect(self.instanceServer, PYSIGNAL("haveControl"), self.haveControl)
elif propertyName == "icons":
icons_list = newValue.split()
try:
self.loginButton.setPixmap(Icons.load(icons_list[0]))
except IndexError:
pass
try:
self.logoutButton.setPixmap(Icons.load(icons_list[1]))
except IndexError:
pass
elif propertyName == "session":
self.session_hwobj = self.getHardwareObject(newValue)
else:
BlissWidget.propertyChanged(self, propertyName, oldValue, newValue)
def setIcons(self, icon_run, icon_stop):
self.runIcon = Icons.load(icon_run)
self.stopIcon = Icons.load(icon_stop)
if self.executing:
self.setPixmap(self.stopIcon)
else:
self.setPixmap(self.runIcon)
def setIcons(self, icon_run, icon_stop):
self.runIcon = Icons.load(icon_run)
self.stopIcon = Icons.load(icon_stop)
if self.executing:
self.setPixmap(self.stopIcon)
else:
self.setPixmap(self.runIcon)
def propertyChanged(self,propertyName,oldValue,newValue):
if propertyName=='ldapServer':
self.ldapConnection=self.getHardwareObject(newValue)
elif propertyName=='codes':
self.setCodes(newValue)
elif propertyName=='localLogin':
self.localLogin=self.getHardwareObject(newValue)
elif propertyName=='dbConnection':
self.dbConnection = self.getHardwareObject(newValue)
elif propertyName=='instanceServer':
if self.instanceServer is not None:
self.disconnect(self.instanceServer,PYSIGNAL('passControl'), self.passControl)
self.disconnect(self.instanceServer,PYSIGNAL('haveControl'), self.haveControl)
self.instanceServer=self.getHardwareObject(newValue)
if self.instanceServer is not None:
self.connect(self.instanceServer,PYSIGNAL('passControl'), self.passControl)
self.connect(self.instanceServer,PYSIGNAL('haveControl'), self.haveControl)
elif propertyName == 'icons':
icons_list=newValue.split()
try:
self.loginButton.setPixmap(Icons.load(icons_list[0]))
except IndexError:
pass
try:
self.logoutButton.setPixmap(Icons.load(icons_list[1]))
except IndexError:
pass
elif propertyName == 'session':
self.session_hwobj = self.getHardwareObject(newValue)
else:
BlissWidget.propertyChanged(self,propertyName,oldValue,newValue)
def addConnection(senderWindow, sender, connection):
newItem = QListViewItem(self.lstConnections)
windowName = senderWindow["name"]
newItem.setText(1, windowName)
if sender != senderWindow:
# object-*
newItem.setText(2, sender["name"])
newItem.setText(4, connection["receiverWindow"])
try:
receiverWindow = self.configuration.windows[connection["receiverWindow"]]
except KeyError:
receiverWindow = {}
ok = False
else:
ok = True
if len(connection["receiver"]):
# *-object
newItem.setText(5, connection["receiver"])
ok = ok and receiverInWindow(connection["receiver"], receiverWindow)
if ok:
newItem.setPixmap(0, Icons.load('button_ok_small'))
else:
newItem.setPixmap(0, Icons.load('button_cancel_small'))
newItem.setText(3, connection['signal'])
newItem.setText(6, connection['slot'])
self.lstConnections.insertItem(newItem)
def __init__(self, parent, caption = ''):
"""Constructor
parent -- the parent QObject
caption -- a caption string (default: no caption)"""
ProcedureEntryField.__init__(self, parent, caption)
box = QWidget(self)
self.savedValue = None
self.textbox = QLineEdit('', box)
okCancelBox = QHBox(box)
okCancelBox.setSpacing(0)
okCancelBox.setMargin(0)
self.cmdOK = QPushButton(okCancelBox)
self.cmdOK.setFixedSize(20, 20)
self.cmdCancel = QPushButton(okCancelBox)
self.cmdCancel.setFixedSize(20, 20)
self.cmdOK.setPixmap(Icons.load('button_ok_small')) #QPixmap(Icons.okXPM))
self.cmdCancel.setPixmap(Icons.load('button_cancel_small')) #QPixmap(Icons.cancelXPM))
QObject.connect(self.textbox, SIGNAL('textChanged( const QString & )'), self.valueChanging)
QObject.connect(self.textbox, SIGNAL('returnPressed()'), self.valueChanged)
QObject.connect(self.cmdOK, SIGNAL('clicked()'), self.valueChanged)
QObject.connect(self.cmdCancel, SIGNAL('clicked()'), self.cancelClicked)
self.cmdCancel.setEnabled(False)
self.cmdOK.setEnabled(True)
QHBoxLayout(box, 0, 5)
box.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.MinimumExpanding)
box.layout().addWidget(self.textbox, 0, Qt.AlignLeft)
box.layout().addWidget(okCancelBox, 0, Qt.AlignLeft)
box.layout().addItem(QSpacerItem(0, 0, QSizePolicy.Expanding, QSizePolicy.Fixed))
def __revertSelectedPolygon(self,nb) :
for item in self.__getIterator(True) :
item.includeMode = not item.includeMode
if item.includeMode: pixmap = Icons.load('Plus2')
else: pixmap = Icons.load('Minus2')
item.setPixmap(0,pixmap)
self.__setRegion()
def propertyChanged(self, property, oldValue, newValue):
#print "LightControlBrick2.propertyChanged",property,newValue
if property == 'wagolight':
if self.wagoLight is not None:
self.disconnect(self.wagoLight, PYSIGNAL('wagoStateChanged'),
self.wagoLightStateChanged)
self.wagoLight = self.getHardwareObject(newValue)
if self.wagoLight is not None:
self.connect(self.wagoLight, PYSIGNAL('wagoStateChanged'),
self.wagoLightStateChanged)
self.wagoLightStateChanged(self.wagoLight.getWagoState())
elif property == 'wagoicons':
icons_list = newValue.split()
try:
self.lightOffButton.setPixmap(Icons.load(icons_list[0]))
self.lightOnButton.setPixmap(Icons.load(icons_list[1]))
except IndexError:
pass
elif property == 'mnemonic':
MotorSpinBoxBrick.MotorSpinBoxBrick.propertyChanged(
self, property, oldValue, newValue)
if self.motor is not None:
if self.motor.isReady():
limits = self.motor.getLimits()
motor_range = float(limits[1] - limits[0])
self['delta'] = str(motor_range / 10.0)
else:
self['delta'] = 1.0
else:
MotorSpinBoxBrick.MotorSpinBoxBrick.propertyChanged(
self, property, oldValue, newValue)
def __init__(self, parent, caption = '', minValue = 0, maxValue = 32768, step = 1, unit = ''):
"""Constructor
parent -- the parent QObject
caption -- a caption string (default: no caption)
minValue -- minimal accepted value (default: 0)
maxValue -- maximal accepted value (default: 32768)
step -- step (default: 1)
unit -- unit string is appended to the end of the displayed value (default: no string)"""
ProcedureEntryField.__init__(self, parent, caption)
box = QWidget(self)
self.spinbox = QSpinBox(minValue, maxValue, step, box)
self.spinbox.setSuffix(' ' + str(unit))
okCancelBox = QHBox(box)
okCancelBox.setSpacing(0)
okCancelBox.setMargin(0)
self.cmdOK = QPushButton(okCancelBox)
self.cmdCancel = QPushButton(okCancelBox)
self.cmdOK.setPixmap(Icons.load('button_ok_small')) #QPixmap(Icons.okXPM))
self.cmdOK.setFixedSize(20, 20)
self.cmdCancel.setPixmap(Icons.load('button_cancel_small')) #QPixmap(Icons.cancelXPM))
self.cmdCancel.setFixedSize(20, 20)
QObject.connect(self.cmdOK, SIGNAL('clicked()'), self.valueChanged)
QObject.connect(self.cmdCancel, SIGNAL('clicked()'), self.cancelClicked)
QObject.connect(self.spinbox, SIGNAL('valueChanged(int)'), self.valueChanging)
QHBoxLayout(box, 0, 5)
box.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.MinimumExpanding)
box.layout().addWidget(self.spinbox, 0, Qt.AlignLeft)
box.layout().addWidget(okCancelBox, 0, Qt.AlignLeft)
box.layout().addItem(QSpacerItem(0, 0, QSizePolicy.Expanding, QSizePolicy.Fixed))
self.setIsOk(False)
def __init__(self, *args):
MotorSpinBoxBrick.MotorSpinBoxBrick.__init__(self, *args)
self.actuatorLight = None
self.lightSavedPosition = None
self.addProperty("actuatorlight", "string", "")
self.addProperty("actuatoricons", "string", "")
self.addProperty("out_delta", "string", "")
self.lightOffButton = QPushButton("0", self.extraButtonsBox)
self.lightOffButton.setPixmap(Icons.load("far_left"))
self.connect(self.lightOffButton, SIGNAL("clicked()"),
self.lightButtonOffClicked)
self.lightOnButton = QPushButton("1", self.extraButtonsBox)
self.lightOnButton.setPixmap(Icons.load("far_right"))
self.connect(self.lightOnButton, SIGNAL("clicked()"),
self.lightButtonOnClicked)
self.spinBox.close()
self.stepButton.close()
self.stopButton.close()
QToolTip.add(self.lightOffButton,
"Switches off the light and sets the intensity to zero")
QToolTip.add(
self.lightOnButton,
"Switches on the light and sets the intensity back to the previous setting",
)
# self.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
self.lightOffButton.setSizePolicy(QSizePolicy.Fixed,
QSizePolicy.Minimum)
self.lightOnButton.setSizePolicy(QSizePolicy.Fixed,
QSizePolicy.Minimum)
def __init__(self, parent):
QWidget.__init__(self, parent)
self.oldPositions = [] #history of motor positions
lblMove = QLabel('go to ', self)
self.txtMove = QLineEdit('', self)
self.cmdMove = QPushButton('', self)
self.cmdGoBack = QPushButton('', self)
self.cmdStop = QPushButton('', self)
self.txtMove.setFixedWidth(self.txtMove.fontMetrics().width('8888.8888'))
self.cmdMove.setToggleButton(True)
self.cmdStop.setPixmap(Icons.load('stop_small')) #QPixmap(Icons.stopXPM_small))
self.cmdStop.setEnabled(False)
self.cmdGoBack.setPixmap(Icons.load('goback_small')) #QPixmap(Icons.gobackXPM_small))
self.cmdMove.setPixmap(Icons.load('move_small')) #QPixmap(Icons.moveXPM_small))
self.cmdGoBack.setEnabled(False)
self.connect(self.cmdMove, SIGNAL('clicked()'), self.cmdMoveClicked)
self.connect(self.cmdStop, SIGNAL('clicked()'), PYSIGNAL('stopMotor'))
self.connect(self.txtMove, SIGNAL('returnPressed()'), self.txtMoveReturnPressed)
self.connect(self.txtMove, SIGNAL('textChanged(const QString &)'), self.txtMoveTextChanged)
self.connect(self.cmdGoBack, SIGNAL('clicked()'), self.cmdGoBackClicked)
QHBoxLayout(self)
self.layout().addItem(QSpacerItem(0, 0, QSizePolicy.Expanding, QSizePolicy.Fixed))
self.layout().addWidget(lblMove)
self.layout().addWidget(self.txtMove)
self.layout().addWidget(self.cmdMove)
self.layout().addWidget(self.cmdGoBack)
self.layout().addWidget(self.cmdStop)
self.layout().addItem(QSpacerItem(0, 0, QSizePolicy.Expanding, QSizePolicy.Fixed))
def propertyChanged(self,propertyName,oldValue,newValue):
if propertyName == "icons":
icons_list=newValue.split()
try:
self.browseButton.setPixmap(Icons.load(icons_list[0]))
except IndexError:
pass
try:
self.reloadButton.setPixmap(Icons.load(icons_list[1]))
except IndexError:
pass
elif propertyName == 'dataCollect':
if self.collectObj is not None:
self.disconnect(self.collectObj, PYSIGNAL('progressUpdate'), self.imageCollected)
self.collectObj=self.getHardwareObject(newValue)
if self.collectObj is not None:
self.connect(self.collectObj, PYSIGNAL('progressUpdate'), self.imageCollected)
elif propertyName == 'fileHistorySize':
self.imageFilename.setMaxCount(newValue)
elif propertyName == 'showLegends':
if not newValue:
self.lineSelection._graph.setTitle=lambda t:mySetTitle(self.lineSelection._graph,t)
self.lineSelection._graph.enableAxis(self.lineSelection._graph.xTop,False)
self.lineSelection._graph.enableAxis(self.lineSelection._graph.xBottom,False)
elif propertyName == 'graphFixedHeight':
if newValue!=-1:
self.lineSelection._graph.setFixedHeight(newValue)
else:
BlissWidget.propertyChanged(self,propertyName,oldValue,newValue)
def propertyChanged(self,property,oldValue,newValue):
#print "LightControlBrick2.propertyChanged",property,newValue
if property=='wagolight':
if self.wagoLight is not None:
self.disconnect(self.wagoLight,PYSIGNAL('wagoStateChanged'),self.wagoLightStateChanged)
self.wagoLight=self.getHardwareObject(newValue)
if self.wagoLight is not None:
self.connect(self.wagoLight,PYSIGNAL('wagoStateChanged'),self.wagoLightStateChanged)
self.wagoLightStateChanged(self.wagoLight.getWagoState())
elif property=='wagoicons':
icons_list=newValue.split()
try:
self.lightOffButton.setPixmap(Icons.load(icons_list[0]))
self.lightOnButton.setPixmap(Icons.load(icons_list[1]))
except IndexError:
pass
elif property=='mnemonic':
MotorSpinBoxBrick.MotorSpinBoxBrick.propertyChanged(self,property,oldValue,newValue)
if self.motor is not None:
if self.motor.isReady():
limits=self.motor.getLimits()
motor_range=float(limits[1]-limits[0])
self['delta']=str(motor_range/10.0)
else:
self['delta']=1.0
else:
MotorSpinBoxBrick.MotorSpinBoxBrick.propertyChanged(self,property,oldValue,newValue)
def __init__(self, parent, text=''):
QHBox.__init__(self, parent)
self.setSpacing(5)
self.txtControl = QLineEdit(self)
self.buttonBox = QHBox(self)
self.cmdOK = QPushButton(self.buttonBox)
size = self.txtControl.height() * 0.8
buttonSize = QSize(size, size)
self.cmdOK.setMaximumSize(buttonSize)
self.cmdCancel = QPushButton(self.buttonBox)
self.cmdCancel.setMaximumSize(buttonSize)
self.cmdOK.setPixmap(
Icons.load('button_ok_small')) #QPixmap(Icons.okXPM))
self.cmdCancel.setPixmap(
Icons.load('button_cancel_small')) #QPixmap(Icons.cancelXPM))
self.connect(self.cmdOK, SIGNAL('clicked()'), self.cmdOKClicked)
self.connect(self.cmdCancel, SIGNAL('clicked()'),
self.cmdCancelClicked)
self.connect(self.txtControl, SIGNAL('returnPressed()'),
self.cmdOKClicked)
self.connect(self.txtControl, SIGNAL('textChanged(const QString &)'),
self.textChanged)
self.setText(text)
def propertyChanged(self, propertyName, oldValue, newValue):
if propertyName == 'ldapServer':
self.ldapConnection = self.getHardwareObject(newValue)
elif propertyName == 'codes':
self.setCodes(newValue)
elif propertyName == 'localLogin':
self.localLogin = self.getHardwareObject(newValue)
elif propertyName == 'dbConnection':
self.dbConnection = self.getHardwareObject(newValue)
elif propertyName == 'instanceServer':
if self.instanceServer is not None:
self.disconnect(self.instanceServer, PYSIGNAL('passControl'),
self.passControl)
self.disconnect(self.instanceServer, PYSIGNAL('haveControl'),
self.haveControl)
self.instanceServer = self.getHardwareObject(newValue)
if self.instanceServer is not None:
self.connect(self.instanceServer, PYSIGNAL('passControl'),
self.passControl)
self.connect(self.instanceServer, PYSIGNAL('haveControl'),
self.haveControl)
elif propertyName == 'icons':
icons_list = newValue.split()
try:
self.loginButton.setPixmap(Icons.load(icons_list[0]))
except IndexError:
pass
try:
self.logoutButton.setPixmap(Icons.load(icons_list[1]))
except IndexError:
pass
elif propertyName == 'session':
self.session_hwobj = self.getHardwareObject(newValue)
else:
BlissWidget.propertyChanged(self, propertyName, oldValue, newValue)
def propertyChanged(self, propertyName, oldValue, newValue):
if propertyName == 'mnemonic':
if self.beamstop is not None:
self.disconnect(self.beamstop, PYSIGNAL('equipmentReady'),
self.equipmentReady)
self.disconnect(self.beamstop, PYSIGNAL('equipmentNotReady'),
self.equipmentNotReady)
self.disconnect(self.beamstop, PYSIGNAL("positionReached"),
self.positionChanged)
self.disconnect(self.beamstop, PYSIGNAL("noPosition"),
self.positionChanged)
self.beamstop = self.getHardwareObject(newValue)
if self.beamstop is not None:
self.connect(self.beamstop, PYSIGNAL('equipmentReady'),
self.equipmentReady)
self.connect(self.beamstop, PYSIGNAL('equipmentNotReady'),
self.equipmentNotReady)
self.connect(self.beamstop, PYSIGNAL("positionReached"),
self.positionChanged)
self.connect(self.beamstop, PYSIGNAL("noPosition"),
self.positionChanged)
self.connect(self.beamstop, PYSIGNAL("stateChanged"),
self.stateChanged)
help = self['setin'] + " the " + self.beamstop.userName(
).lower()
QToolTip.add(self.setInButton, help)
help = self['setout'] + " the " + self.beamstop.userName(
).lower()
QToolTip.add(self.setOutButton, help)
self.containerBox.setTitle(self.beamstop.userName())
#self.alignmentDialog.setMnemonic(newValue)
if self.beamstop.isReady():
self.equipmentReady()
else:
self.equipmentNotReady()
else:
self.equipmentNotReady()
self.wrapperHO = self.beamstop
elif propertyName == 'setupIcon':
if newValue == "":
self.stateLabel.setButtonText('+')
else:
self.stateLabel.setButtonPixmap(Icons.load(newValue))
elif propertyName == 'stopIcon':
if newValue == "":
self.stateLabel.setButtonStopText('*')
else:
self.stateLabel.setButtonStopPixmap(Icons.load(newValue))
elif propertyName == 'icons':
DuoStateBrick.propertyChanged.im_func(self, propertyName, oldValue,
newValue)
else:
BaseComponents.BlissWidget.propertyChanged(self, propertyName,
oldValue, newValue)
def setIcons(self,load_icon,unload_icon):
self.loadIcon=Icons.load(load_icon)
self.unloadIcon=Icons.load(unload_icon)
txt=str(self.buttonLoad.textLabel()).split()[0]
if txt=="Mount":
self.buttonLoad.setPixmap(self.loadIcon)
elif txt=="Unmount":
self.buttonLoad.setPixmap(self.unloadIcon)
def setIcons(self, load_icon, unload_icon):
self.loadIcon = Icons.load(load_icon)
self.unloadIcon = Icons.load(unload_icon)
txt = str(self.buttonLoad.textLabel()).split()[0]
if txt == "Mount":
self.buttonLoad.setPixmap(self.loadIcon)
elif txt == "Unmount":
self.buttonLoad.setPixmap(self.unloadIcon)
def __init__(self, table, text):
QTableItem.__init__( self, table, QTableItem.Never, text)
self.pixs = [ Icons.load('blank'), # OFF
Icons.load('red_led'), # MOVING
Icons.load('green_led'), # ON
Icons.load('yellow_led') ] # ERROR
self.off()
def propertyChanged(self,propertyName,oldValue,newValue):
if propertyName=='mnemonic':
if self.beamstop is not None:
self.disconnect(self.beamstop, PYSIGNAL('equipmentReady'), self.equipmentReady)
self.disconnect(self.beamstop, PYSIGNAL('equipmentNotReady'), self.equipmentNotReady)
self.disconnect(self.beamstop, PYSIGNAL("positionReached"), self.positionChanged)
self.disconnect(self.beamstop, PYSIGNAL("noPosition"), self.positionChanged)
self.beamstop = self.getHardwareObject(newValue)
if self.beamstop is not None:
self.connect(self.beamstop, PYSIGNAL('equipmentReady'), self.equipmentReady)
self.connect(self.beamstop, PYSIGNAL('equipmentNotReady'), self.equipmentNotReady)
self.connect(self.beamstop, PYSIGNAL("positionReached"), self.positionChanged)
self.connect(self.beamstop, PYSIGNAL("noPosition"), self.positionChanged)
help=self['setin']+" the "+self.beamstop.userName().lower()
QToolTip.add(self.setInButton,help)
help=self['setout']+" the "+self.beamstop.userName().lower()
QToolTip.add(self.setOutButton,help)
if not "in" in self.beamstop.positions or not "out" in self.beamstop.positions:
logging.getLogger().warning("%s: vertical beamstop motor does not define In and Out positions", str(self.name()))
self.containerBox.setTitle(self.beamstop.userName())
self.alignmentDialog.setMnemonic(newValue)
# do some checkings...
try:
bstopz = self.beamstop.getDeviceByRole("vertical").getMotorMnemonic()
bstopy = self.beamstop.getDeviceByRole("horizontal").getMotorMnemonic()
except:
logging.getLogger().error("%s: could not find vertical and horizontal motors in Hardware Object %s", str(self.name()), self.beamstop.name())
if self.beamstop.isReady():
self.beamstop.setNewPositions("out", {"vertical": self.beamstop.getDeviceByRole("vertical").getLimits()[0] })
self.equipmentReady()
self.beamstop.checkPosition()
else:
self.equipmentNotReady()
else:
self.equipmentNotReady()
self.wrapperHO=self.beamstop
elif propertyName=='setupIcon':
if newValue=="":
self.stateLabel.setButtonText('+')
else:
self.stateLabel.setButtonPixmap(Icons.load(newValue))
elif propertyName=='stopIcon':
if newValue=="":
self.stateLabel.setButtonStopText('*')
else:
self.stateLabel.setButtonStopPixmap(Icons.load(newValue))
elif propertyName=='icons':
DuoStateBrick.propertyChanged.__func__(self,propertyName,oldValue,newValue)
else:
BaseComponents.BlissWidget.propertyChanged(self,propertyName,oldValue,newValue)
def propertyChanged(self,propertyName,oldValue,newValue):
if propertyName=='mnemonic':
if self.beamstop is not None:
self.disconnect(self.beamstop, PYSIGNAL('equipmentReady'), self.equipmentReady)
self.disconnect(self.beamstop, PYSIGNAL('equipmentNotReady'), self.equipmentNotReady)
self.disconnect(self.beamstop, PYSIGNAL("positionReached"), self.positionChanged)
self.disconnect(self.beamstop, PYSIGNAL("noPosition"), self.positionChanged)
self.beamstop = self.getHardwareObject(newValue)
if self.beamstop is not None:
self.connect(self.beamstop, PYSIGNAL('equipmentReady'), self.equipmentReady)
self.connect(self.beamstop, PYSIGNAL('equipmentNotReady'), self.equipmentNotReady)
self.connect(self.beamstop, PYSIGNAL("positionReached"), self.positionChanged)
self.connect(self.beamstop, PYSIGNAL("noPosition"), self.positionChanged)
help=self['setin']+" the "+self.beamstop.userName().lower()
QToolTip.add(self.setInButton,help)
help=self['setout']+" the "+self.beamstop.userName().lower()
QToolTip.add(self.setOutButton,help)
if not "in" in self.beamstop.positions or not "out" in self.beamstop.positions:
logging.getLogger().warning("%s: vertical beamstop motor does not define In and Out positions", str(self.name()))
self.containerBox.setTitle(self.beamstop.userName())
self.alignmentDialog.setMnemonic(newValue)
# do some checkings...
try:
bstopz = self.beamstop.getDeviceByRole("vertical").getMotorMnemonic()
bstopy = self.beamstop.getDeviceByRole("horizontal").getMotorMnemonic()
except:
logging.getLogger().error("%s: could not find vertical and horizontal motors in Hardware Object %s", str(self.name()), self.beamstop.name())
if self.beamstop.isReady():
self.beamstop.setNewPositions("out", {"vertical": self.beamstop.getDeviceByRole("vertical").getLimits()[0] })
self.equipmentReady()
self.beamstop.checkPosition()
else:
self.equipmentNotReady()
else:
self.equipmentNotReady()
self.wrapperHO=self.beamstop
elif propertyName=='setupIcon':
if newValue=="":
self.stateLabel.setButtonText('+')
else:
self.stateLabel.setButtonPixmap(Icons.load(newValue))
elif propertyName=='stopIcon':
if newValue=="":
self.stateLabel.setButtonStopText('*')
else:
self.stateLabel.setButtonStopPixmap(Icons.load(newValue))
elif propertyName=='icons':
DuoStateBrick.propertyChanged.im_func(self,propertyName,oldValue,newValue)
else:
BaseComponents.BlissWidget.propertyChanged(self,propertyName,oldValue,newValue)
def setIcons(self,icon_run,icon_stop=None):
self.runIcon=Icons.load(icon_run)
if icon_stop is not None:
self.stopIcon=Icons.load(icon_stop)
if self.executing and icon_stop is not None:
self.setPixmap(self.stopIcon)
else:
self.setPixmap(self.runIcon)
def propertyChanged(self, propertyName, oldValue, newValue):
if propertyName == 'mnemonic':
if self.instanceServer is not None:
self.disconnect(self.instanceServer,PYSIGNAL('instanceInitializing'),self.instanceInitializing)
self.disconnect(self.instanceServer,PYSIGNAL('serverInitialized'),self.serverInitialized)
self.disconnect(self.instanceServer,PYSIGNAL('clientInitialized'),self.clientInitialized)
self.disconnect(self.instanceServer,PYSIGNAL('serverClosed'),self.serverClosed)
self.disconnect(self.instanceServer,PYSIGNAL('newClient'), self.newClient)
self.disconnect(self.instanceServer,PYSIGNAL('haveControl'), self.haveControl)
self.disconnect(self.instanceServer,PYSIGNAL('passControl'), self.passControl)
self.disconnect(self.instanceServer,PYSIGNAL('wantsControl'), self.wantsControl)
self.disconnect(self.instanceServer,PYSIGNAL('widgetUpdate'), self.widgetUpdate)
self.disconnect(self.instanceServer,PYSIGNAL('clientChanged'), self.clientChanged)
self.disconnect(self.instanceServer,PYSIGNAL('clientClosed'), self.clientClosed)
self.disconnect(self.instanceServer,PYSIGNAL('widgetCall'), self.widgetCall)
self.instanceServer = self.getHardwareObject(newValue)
if self.instanceServer is not None:
self.connect(self.instanceServer,PYSIGNAL('instanceInitializing'),self.instanceInitializing)
self.connect(self.instanceServer,PYSIGNAL('serverInitialized'),self.serverInitialized)
self.connect(self.instanceServer,PYSIGNAL('clientInitialized'),self.clientInitialized)
self.connect(self.instanceServer,PYSIGNAL('serverClosed'),self.serverClosed)
self.connect(self.instanceServer,PYSIGNAL('newClient'), self.newClient)
self.connect(self.instanceServer,PYSIGNAL('haveControl'), self.haveControl)
self.connect(self.instanceServer,PYSIGNAL('passControl'), self.passControl)
self.connect(self.instanceServer,PYSIGNAL('wantsControl'), self.wantsControl)
self.connect(self.instanceServer,PYSIGNAL('widgetUpdate'), self.widgetUpdate)
self.connect(self.instanceServer,PYSIGNAL('clientChanged'), self.clientChanged)
self.connect(self.instanceServer,PYSIGNAL('clientClosed'), self.clientClosed)
self.connect(self.instanceServer,PYSIGNAL('widgetCall'), self.widgetCall)
elif propertyName=="xmlrpc_server":
self.xmlrpc_server = self.getHardwareObject(newValue)
elif propertyName == 'hutchtrigger':
self.hutchtrigger = self.getHardwareObject(newValue)
if self.hutchtrigger is not None:
self.connect(self.hutchtrigger, PYSIGNAL("hutchTrigger"), self.hutchTriggerChanged)
elif propertyName == 'icons':
icons_list=newValue.split()
try:
self.serverIcon=Icons.load(icons_list[0])
except IndexError:
pass
try:
self.clientIcon=Icons.load(icons_list[1])
except IndexError:
pass
try:
self.takeControlButton.setPixmap(Icons.load(icons_list[2]))
except IndexError:
pass
try:
self.askForControlButton.setPixmap(Icons.load(icons_list[3]))
except IndexError:
pass
else:
BlissWidget.propertyChanged(self,propertyName,oldValue,newValue)
def __init__(self, table, text):
QTableItem.__init__(self, table, QTableItem.Never, text)
self.pixs = [
Icons.load('blank'), # OFF
Icons.load('red_led'), # MOVING
Icons.load('green_led'), # ON
Icons.load('yellow_led')
] # ERROR
self.off()
def setIcons(self, icons):
icons_list = icons.split()
try:
self.snapshotButton.setPixmap(Icons.load(icons_list[0]))
except IndexError:
pass
try:
self.settingsButton.setPixmap(Icons.load(icons_list[1]))
except IndexError:
pass
def setIcons(self, icons):
icons_list = icons.split()
try:
self.snapshotButton.setPixmap(Icons.load(icons_list[0]))
except IndexError:
pass
try:
self.settingsButton.setPixmap(Icons.load(icons_list[1]))
except IndexError:
pass
def createEditor(self):
validationPanel = QHBox(self.table().viewport(), 'validationPanel')
self.OK = QToolButton(validationPanel)
self.OK.setAutoRaise(True)
self.OK.setIconSet(QIconSet(Icons.load('button_ok_small'))) #QPixmap(Icons.tinyOK)))
self.Cancel = QToolButton(validationPanel)
self.Cancel.setAutoRaise(True)
self.Cancel.setIconSet(QIconSet(Icons.load('button_cancel_small'))) #QPixmap(Icons.tinyCancel)))
self.Reset = QToolButton(validationPanel)
self.Reset.setIconSet(QIconSet(Icons.load('button_default_small'))) #QPixmap(Icons.defaultXPM)))
self.Reset.setAutoRaise(True)
self.setEnabled(False)
return validationPanel
def propertyChanged(self, propertyName, oldValue, newValue):
if propertyName == "dataCollect":
if self.collectObj is not None:
self.disconnect(
self.collectObj,
PYSIGNAL("collectOscillationFinished"),
self.updateOscillation,
)
self.disconnect(
self.collectObj, PYSIGNAL("collectImageTaken"), self.imageCollected
)
self.collectObj = self.getHardwareObject(newValue)
if self.collectObj is not None:
self.connect(
self.collectObj,
PYSIGNAL("collectOscillationFinished"),
self.updateOscillation,
)
self.connect(
self.collectObj, PYSIGNAL("collectImageTaken"), self.imageCollected
)
self.dbServer = self.collectObj.dbServerHO()
elif propertyName == "icons":
icons_list = newValue.split()
try:
self.commentsButton.setPixmap(Icons.load(icons_list[0]))
except IndexError:
pass
else:
BlissWidget.propertyChanged(self, propertyName, oldValue, newValue)
def propertyChanged(self, propertyName, oldValue, newValue):
if propertyName == "dataCollect":
if self.collectObj is not None:
self.disconnect(
self.collectObj,
PYSIGNAL("collectOscillationFinished"),
self.updateOscillation,
)
self.disconnect(self.collectObj, PYSIGNAL("collectImageTaken"),
self.imageCollected)
self.collectObj = self.getHardwareObject(newValue)
if self.collectObj is not None:
self.connect(
self.collectObj,
PYSIGNAL("collectOscillationFinished"),
self.updateOscillation,
)
self.connect(self.collectObj, PYSIGNAL("collectImageTaken"),
self.imageCollected)
self.dbServer = self.collectObj.dbServerHO()
elif propertyName == "icons":
icons_list = newValue.split()
try:
self.commentsButton.setPixmap(Icons.load(icons_list[0]))
except IndexError:
pass
else:
BlissWidget.propertyChanged(self, propertyName, oldValue, newValue)
def __init__(self, parent):
VideoDisplay.VideoDisplayWidget.__init__(self, parent,
DetectorImage.IMAGE_SIZE,
DetectorImage.IMAGE_SIZE)
self.setCursor(QCursor(QCursor.ArrowCursor))
no_image = None
self.noImageJpeg = None
self.waitingFor = [None, None, None, None, None]
self.currentContrast = 2
self.wantedImage = [None, None, None]
self.currentImage = [None, None, None]
try:
no_image = open(Icons.getIconPath(DetectorImage.NO_IMAGE_FILE))
except BaseException:
pass
else:
try:
self.noImageJpeg = no_image.read()
except BaseException:
self.noImageJpeg = None
try:
no_image.close()
except BaseException:
pass
self.imageServer = None
self.clearImage()
self.delayTimer = QTimer(self)
QObject.connect(self.delayTimer, SIGNAL("timeout()"),
self.serverGetImage)
self.timeoutTimer = QTimer(self)
QObject.connect(self.timeoutTimer, SIGNAL("timeout()"),
self.serverTimeout)
def __createPolygon(self,nb) :
try:
showgButton = self._widgetTree.child('__showGrab')
showgButton.setOn(True)
grabButton = self._widgetTree.child('__grabButton')
grabButton.setOn(False)
polygon = QubPolygoneDrawingMgr(self._view.canvas(),self._view.matrix())
polygon.setActionInfo('Drawing mask plygon %d' % self.__polyNb)
polygon.setEndDrawCallBack(self.__polygonCBK)
polygon.setAutoDisconnectEvent(True)
drawingObject = QubCanvasCloseLinePolygone(self._view.canvas())
polygon.addDrawingObject(drawingObject)
self._view.addDrawingMgr(polygon)
polygon.setColor(self._view.foregroundColor())
newItem = qt.QListViewItem(self.__polygonListWidget)
newItem.setText(0,'Polygon %d' % self.__polyNb)
newItem.setPixmap(0,Icons.load('Plus2'))
newItem.drawingManager = polygon
newItem.includeMode = True
self.__polyNb += 1
polygon.startDrawing()
except:
import traceback
traceback.print_exc()
def propertyChanged(self, propertyName, oldValue, newValue):
if propertyName == 'mnemonic':
if self.instanceServer is not None:
self.disconnect(self.instanceServer,PYSIGNAL('chatMessageReceived'), self.messageArrived)
self.disconnect(self.instanceServer,PYSIGNAL('newClient'), self.newClient)
self.disconnect(self.instanceServer,PYSIGNAL('serverInitialized'),self.serverInitialized)
self.disconnect(self.instanceServer,PYSIGNAL('clientInitialized'),self.clientInitialized)
self.disconnect(self.instanceServer,PYSIGNAL('serverClosed'), self.clientClosed)
self.disconnect(self.instanceServer,PYSIGNAL('wantsControl'), self.wantsControl)
self.disconnect(self.instanceServer,PYSIGNAL('haveControl'), self.haveControl)
self.disconnect(self.instanceServer,PYSIGNAL('passControl'), self.passControl)
self.disconnect(self.instanceServer,PYSIGNAL('clientClosed'), self.clientClosed)
self.disconnect(self.instanceServer,PYSIGNAL('clientChanged'), self.clientChanged)
self.instanceServer = self.getHardwareObject(newValue)
if self.instanceServer is not None:
self.connect(self.instanceServer,PYSIGNAL('chatMessageReceived'), self.messageArrived)
self.connect(self.instanceServer,PYSIGNAL('newClient'), self.newClient)
self.connect(self.instanceServer,PYSIGNAL('serverInitialized'),self.serverInitialized)
self.connect(self.instanceServer,PYSIGNAL('clientInitialized'),self.clientInitialized)
self.connect(self.instanceServer,PYSIGNAL('serverClosed'), self.clientClosed)
self.connect(self.instanceServer,PYSIGNAL('wantsControl'), self.wantsControl)
self.connect(self.instanceServer,PYSIGNAL('haveControl'), self.haveControl)
self.connect(self.instanceServer,PYSIGNAL('passControl'), self.passControl)
self.connect(self.instanceServer,PYSIGNAL('clientClosed'), self.clientClosed)
self.connect(self.instanceServer,PYSIGNAL('clientChanged'), self.clientChanged)
elif propertyName == 'icons':
icons_list=newValue.split()
try:
self.sendButton.setPixmap(Icons.load(icons_list[0]))
except IndexError:
pass
else:
BaseComponents.BlissWidget.propertyChanged(self,propertyName,oldValue,newValue)
def __init__(self, parent, title = "", name = "", iconName = "", min = 0, max = 0):
QVBox.__init__(self, parent)
self.currentItem = 0 #not initialized
self.currentMatrixCode = None
self.name = name
self.min = min
self.max = max
self.setMargin(5)
self.setSpacing(5)
titleBox = QHBox(self)
HorizontalSpacer(titleBox)
lblItemIcon = QLabel(titleBox)
lblTitle = QLabel(title, titleBox)
HorizontalSpacer(titleBox)
titleBox.setSpacing(5)
lblItemIcon.setPixmap(Icons.load(iconName))
self.lblCurrentItem = QLabel(self)
lblItemIcon.setAlignment(Qt.AlignHCenter)
self.lblCurrentItem.setAlignment(Qt.AlignHCenter)
cmdBox = QHBox(self)
self.cmdPrevious = QPushButton("<", cmdBox)
self.cmdChange = QPushButton("Change", cmdBox)
self.cmdNext = QPushButton(">", cmdBox)
QObject.connect(self.cmdChange, SIGNAL("clicked()"), self.cmdChangeClicked)
QObject.connect(self.cmdPrevious, SIGNAL("clicked()"), self.cmdPreviousClicked)
QObject.connect(self.cmdNext, SIGNAL("clicked()"), self.cmdNextClicked)
def tab_slot(
self,
hide=True,
page={
"widget": scrollview,
"label": self.tabLabel(scrollview),
"index": self.indexOf(scrollview),
"icon": icon,
"hidden": False
}):
if hide:
if not page["hidden"]:
self.removePage(page["widget"])
page["hidden"] = True
else:
if page["hidden"]:
if icon:
pixmap = Icons.load(icon)
self.insertTab(page["widget"],
qt.QIconSet(pixmap, pixmap), label,
page["index"])
else:
self.insertTab(page["widget"], page["label"],
page["index"])
self.showPage(page["widget"])
page["hidden"] = False
else:
self.showPage(page["widget"])
def propertyChanged(self, propertyName, oldValue, newValue):
if propertyName == 'mnemonic':
if self.energy is not None:
self.disconnect(self.energy,PYSIGNAL('energyChanged'),self.energyChanged)
self.disconnect(self.energy,PYSIGNAL('connected'),self.connected)
self.disconnect(self.energy,PYSIGNAL('disconnected'),self.disconnected)
self.disconnect(self.energy,PYSIGNAL('moveEnergyStarted'),self.changeEnergyStarted)
self.disconnect(self.energy,PYSIGNAL('moveEnergyFailed'),self.changeEnergyFailed)
self.disconnect(self.energy,PYSIGNAL('moveEnergyFinished'),self.changeEnergyOk)
self.disconnect(self.energy,PYSIGNAL('moveEnergyReady'),self.changeEnergyReady)
self.disconnect(self.energy,PYSIGNAL('energyLimitsChanged'),self.energyLimitsChanged)
self.disconnect(self.energy,PYSIGNAL('wavelengthLimitsChanged'),self.wavelengthLimitsChanged)
self.units.clear()
self.kevHistory=[]
self.angHistory=[]
self.energy = self.getHardwareObject(newValue)
if self.energy is not None:
self.units.insertItem('keV')
self.units.insertItem(chr(197))
def_mode=self['defaultMode']
if def_mode=='Ang':
def_mode=chr(197)
self.units.setCurrentText(def_mode)
self.unitChanged(def_mode)
self.connect(self.energy,PYSIGNAL('energyChanged'),self.energyChanged)
self.connect(self.energy,PYSIGNAL('connected'),self.connected)
self.connect(self.energy,PYSIGNAL('disconnected'),self.disconnected)
self.connect(self.energy,PYSIGNAL('moveEnergyStarted'),self.changeEnergyStarted)
self.connect(self.energy,PYSIGNAL('moveEnergyFailed'),self.changeEnergyFailed)
self.connect(self.energy,PYSIGNAL('moveEnergyFinished'),self.changeEnergyOk)
self.connect(self.energy,PYSIGNAL('moveEnergyReady'),self.changeEnergyReady)
self.connect(self.energy,PYSIGNAL('energyLimitsChanged'),self.energyLimitsChanged)
self.connect(self.energy,PYSIGNAL('wavelengthLimitsChanged'),self.wavelengthLimitsChanged)
if self.energy.isConnected():
self.connected()
else:
self.disconnected()
else:
self.updateGUI()
elif propertyName == 'icons':
icons_list=newValue.split()
#try:
# self.applyButton.setPixmap(Icons.load(icons_list[0]))
#except IndexError:
# pass
try:
self.stopButton.setPixmap(Icons.load(icons_list[1]))
except IndexError:
pass
elif propertyName == 'alwaysReadonly':
pass
else:
BlissWidget.propertyChanged(self,propertyName,oldValue,newValue)
def __init__(self, parent):
VideoDisplay.VideoDisplayWidget.__init__(
self, parent, DetectorImage.IMAGE_SIZE, DetectorImage.IMAGE_SIZE
)
self.setCursor(QCursor(QCursor.ArrowCursor))
no_image = None
self.noImageJpeg = None
self.waitingFor = [None, None, None, None, None]
self.currentContrast = 2
self.wantedImage = [None, None, None]
self.currentImage = [None, None, None]
try:
no_image = open(Icons.getIconPath(DetectorImage.NO_IMAGE_FILE))
except BaseException:
pass
else:
try:
self.noImageJpeg = no_image.read()
except BaseException:
self.noImageJpeg = None
try:
no_image.close()
except BaseException:
pass
self.imageServer = None
self.clearImage()
self.delayTimer = QTimer(self)
QObject.connect(self.delayTimer, SIGNAL("timeout()"), self.serverGetImage)
self.timeoutTimer = QTimer(self)
QObject.connect(self.timeoutTimer, SIGNAL("timeout()"), self.serverTimeout)
def __createPolygon(self, nb):
try:
showgButton = self._widgetTree.child('__showGrab')
showgButton.setOn(True)
grabButton = self._widgetTree.child('__grabButton')
grabButton.setOn(False)
polygon = QubPolygoneDrawingMgr(self._view.canvas(),
self._view.matrix())
polygon.setActionInfo('Drawing mask plygon %d' % self.__polyNb)
polygon.setEndDrawCallBack(self.__polygonCBK)
polygon.setAutoDisconnectEvent(True)
drawingObject = QubCanvasCloseLinePolygone(self._view.canvas())
polygon.addDrawingObject(drawingObject)
self._view.addDrawingMgr(polygon)
polygon.setColor(self._view.foregroundColor())
newItem = qt.QListViewItem(self.__polygonListWidget)
newItem.setText(0, 'Polygon %d' % self.__polyNb)
newItem.setPixmap(0, Icons.load('Plus2'))
newItem.drawingManager = polygon
newItem.includeMode = True
self.__polyNb += 1
polygon.startDrawing()
except:
import traceback
traceback.print_exc()
def __init__(self, *args):
BlissWidget.__init__(self, *args)
self.addProperty("microdiff", "boolean", False)
self.addProperty("mnemonic", "string", "")
self.addProperty("defaultHolderLength", "integer", 22)
#self.defineSignal("sampleLoaded", ())
self.sampleChanger = None
self.loading = False
# GUI
self.statusBox = QVGroupBox("Status", self)
self.lblStatus = QLabel("", self.statusBox)
abortResetBox = QHBox(self.statusBox)
self.cmdReset = QToolButton(abortResetBox)
sampleBox = QVBox(self)
self.lblSampleLoadingState = QLabel(sampleBox)
self.cmdBox = QGrid(3, sampleBox)
self.basketSelectionWidget = BasketSelectionWidget(self.cmdBox)
HorizontalSpacer(self.cmdBox)
self.sampleSelectionWidget = SampleSelectionWidget(self.cmdBox)
self.basketView = SampleBasketView(self.cmdBox, 5)
self.loadSampleCmdWidget = LoadSampleCmdWidget(self.cmdBox)
self.sampleView = SampleBasketView(self.cmdBox, 10)
self.statusBox.setInsideMargin(5)
self.statusBox.setInsideSpacing(10)
self.statusBox.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Fixed)
self.cmdReset.setIconSet(QIconSet(Icons.load("reload")))
self.cmdReset.setTextLabel("Reset")
self.cmdReset.setUsesTextLabel(True)
self.lblStatus.setAlignment(Qt.AlignHCenter)
sampleBox.setMargin(5)
sampleBox.setSpacing(5)
self.lblSampleLoadingState.setAlignment(Qt.AlignHCenter)
# final layout
"""
QGridLayout(self.cmdBox, 3, 3, 5, 5)
self.cmdBox.layout().addWidget(self.basketSelectionWidget, 0, 0)
self.cmdBox.layout().addWidget(self.basketView, 1, 0)
self.cmdBox.layout().addWidget(self.loadSampleCmdWidget, 2, 1, Qt.AlignBottom)
self.cmdBox.layout().addWidget(hspacer, 0, 1)
self.cmdBox.layout().addWidget(self.sampleSelectionWidget, 0, 2)
self.cmdBox.layout().addWidget(self.sampleView, 1, 2)
"""
QVBoxLayout(self, 5, 5)
self.layout().addWidget(self.statusBox)
self.layout().addWidget(sampleBox)
self.layout().addItem(QSpacerItem(QSizePolicy.Fixed, QSizePolicy.MinimumExpanding))
QObject.connect(self.cmdReset, SIGNAL("clicked()"), self.resetSampleChanger)
QObject.connect(self.basketSelectionWidget, PYSIGNAL("changeSelectedItem"), self.changeBasketClicked)
QObject.connect(self.sampleSelectionWidget, PYSIGNAL("changeSelectedItem"), self.changeSampleClicked)
QObject.connect(self.basketSelectionWidget, PYSIGNAL("scanBasket"), self.scanBasket)
QObject.connect(self.loadSampleCmdWidget, PYSIGNAL("loadSample"), self.loadSample)
QObject.connect(self.loadSampleCmdWidget, PYSIGNAL("unloadSample"), self.unloadSample)
def __init__(self, parent = None, name = "task_toolbox"):
qt.QWidget.__init__(self, parent, name)
# Data atributes
self.shape_history = None
self.tree_brick = None
self.previous_page_index = 0
#Layout
self.v_layout = qt.QVBoxLayout(self)
self.v_layout.setSpacing(10)
self.method_group_box = qt.QVGroupBox("Collection method", self)
font = self.method_group_box.font()
font.setPointSize(12)
self.method_group_box.setFont(font)
self.tool_box = qt.QToolBox(self.method_group_box , "tool_box")
self.tool_box.setFixedWidth(475)
font = self.tool_box.font()
font.setPointSize(10)
self.tool_box.setFont(font)
self.discrete_page = CreateDiscreteWidget(self.tool_box, "Discrete",)
self.discrete_page.setBackgroundMode(qt.QWidget.PaletteBackground)
self.char_page = CreateCharWidget(self.tool_box, "Characterise")
self.char_page.setBackgroundMode(qt.QWidget.PaletteBackground)
self.helical_page = CreateHelicalWidget(self.tool_box, "helical_page")
self.helical_page.setBackgroundMode(qt.QWidget.PaletteBackground)
self.energy_scan_page = CreateEnergyScanWidget(self.tool_box, "energy_scan")
self.xrf_scan_page = CreateXRFScanWidget(self.tool_box, "xrf_scan")
self.workflow_page = CreateWorkflowWidget(self.tool_box, 'workflow')
self.tool_box.addItem(self.discrete_page, "Standard Collection")
self.tool_box.addItem(self.char_page, "Characterisation")
self.tool_box.addItem(self.helical_page, "Helical Collection")
self.tool_box.addItem(self.energy_scan_page, "Energy Scan")
self.tool_box.addItem(self.xrf_scan_page, "XRF Scan")
self.tool_box.addItem(self.workflow_page, "Advanced")
self.add_pixmap = Icons.load("add_row.png")
self.create_task_button = qt.QPushButton(" Add to queue", self)
self.create_task_button.setIconSet(qt.QIconSet(self.add_pixmap))
msg = "Add the collection method to the selected sample"
qt.QToolTip.add(self.create_task_button, msg)
self.v_layout.addWidget(self.method_group_box)
self.button_hlayout = qt.QHBoxLayout(None)
self.spacer = qt.QSpacerItem(1, 20, qt.QSizePolicy.Expanding,
qt.QSizePolicy.Minimum)
self.button_hlayout.addItem(self.spacer)
self.button_hlayout.addWidget(self.create_task_button)
self.method_group_box.layout().setSpacing(10)
self.method_group_box.layout().addLayout(self.button_hlayout)
qt.QObject.connect(self.create_task_button, qt.SIGNAL("clicked()"),
self.create_task_button_click)
qt.QObject.connect(self.tool_box, qt.SIGNAL("currentChanged( int )"),
self.current_page_changed)
def propertyChanged(self,propertyName,oldValue,newValue):
if propertyName=='mnemonic':
if self.beamstop is not None:
self.disconnect(self.beamstop, PYSIGNAL('equipmentReady'), self.equipmentReady)
self.disconnect(self.beamstop, PYSIGNAL('equipmentNotReady'), self.equipmentNotReady)
self.disconnect(self.beamstop, PYSIGNAL("positionReached"), self.positionChanged)
self.disconnect(self.beamstop, PYSIGNAL("noPosition"), self.positionChanged)
self.beamstop = self.getHardwareObject(newValue)
if self.beamstop is not None:
self.connect(self.beamstop, PYSIGNAL('equipmentReady'), self.equipmentReady)
self.connect(self.beamstop, PYSIGNAL('equipmentNotReady'), self.equipmentNotReady)
self.connect(self.beamstop, PYSIGNAL("positionReached"), self.positionChanged)
self.connect(self.beamstop, PYSIGNAL("noPosition"), self.positionChanged)
self.connect(self.beamstop, PYSIGNAL("stateChanged"), self.stateChanged)
help=self['setin']+" the "+self.beamstop.userName().lower()
QToolTip.add(self.setInButton,help)
help=self['setout']+" the "+self.beamstop.userName().lower()
QToolTip.add(self.setOutButton,help)
self.containerBox.setTitle(self.beamstop.userName())
#self.alignmentDialog.setMnemonic(newValue)
if self.beamstop.isReady():
self.equipmentReady()
else:
self.equipmentNotReady()
else:
self.equipmentNotReady()
self.wrapperHO=self.beamstop
elif propertyName=='setupIcon':
if newValue=="":
self.stateLabel.setButtonText('+')
else:
self.stateLabel.setButtonPixmap(Icons.load(newValue))
elif propertyName=='stopIcon':
if newValue=="":
self.stateLabel.setButtonStopText('*')
else:
self.stateLabel.setButtonStopPixmap(Icons.load(newValue))
elif propertyName=='icons':
DuoStateBrick.propertyChanged.im_func(self,propertyName,oldValue,newValue)
else:
BaseComponents.BlissWidget.propertyChanged(self,propertyName,oldValue,newValue)
def propertyChanged(self, property, oldValue, newValue):
if property == "mnemonic":
if self.attenuators is not None:
self.disconnect(self.attenuators, PYSIGNAL("deviceReady"),
self.connected)
self.disconnect(self.attenuators, PYSIGNAL("deviceNotReady"),
self.disconnected)
self.disconnect(self.attenuators, PYSIGNAL("attStateChanged"),
self.attStateChanged)
self.disconnect(
self.attenuators,
PYSIGNAL("attFactorChanged"),
self.attFactorChanged,
)
self.transHistory = []
self.attenuators = self.getHardwareObject(newValue)
if self.attenuators is not None:
self.filtersDialog.setAttenuators(self.attenuators)
self.connect(self.attenuators, PYSIGNAL("deviceReady"),
self.connected)
self.connect(self.attenuators, PYSIGNAL("deviceNotReady"),
self.disconnected)
self.connect(self.attenuators, PYSIGNAL("attStateChanged"),
self.attStateChanged)
self.connect(
self.attenuators,
PYSIGNAL("attFactorChanged"),
self.attFactorChanged,
)
if self.attenuators.isReady():
self.connected()
self.attFactorChanged(self.attenuators.getAttFactor())
self.attStateChanged(self.attenuators.getAttState())
else:
self.disconnected()
else:
self.disconnected()
elif property == "filtersMode":
if newValue == "Disabled":
self.filtersButton.hide()
elif property == "icons":
icons_list = newValue.split()
# try:
# self.applyButton.setPixmap(Icons.load(icons_list[0]))
# except IndexError:
# pass
try:
self.filtersButton.setPixmap(Icons.load(icons_list[1]))
except IndexError:
pass
else:
BlissWidget.propertyChanged(self, property, oldValue, newValue)
def propertyChanged(self, propertyName, oldValue, newValue):
# print "propertyChanged",propertyName,newValue
if propertyName == "mnemonic":
if self.listObj is not None:
self.disconnect(self.listObj, PYSIGNAL("connected"), self.connected)
self.disconnect(
self.listObj, PYSIGNAL("disconnected"), self.disconnected
)
self.disconnect(
self.listObj, PYSIGNAL("motorListChanged"), self.motorsChanged
)
self.listObj = self.getHardwareObject(newValue)
if self.listObj is not None:
self.connect(self.listObj, PYSIGNAL("connected"), self.connected)
self.connect(self.listObj, PYSIGNAL("disconnected"), self.disconnected)
self.connect(
self.listObj, PYSIGNAL("motorListChanged"), self.motorsChanged
)
if self.listObj.isConnected():
self.connected()
else:
self.disconnected()
self.motorsChanged(
self.listObj.getSpecVersion(), self.listObj.getMotorList()
)
else:
self.disconnected()
self.motorsChanged(None, None)
elif propertyName == "icons":
icons_list = newValue.split()
try:
self.openButton.setPixmap(Icons.load(icons_list[0]))
self.motorsList.setSizePolicy(
QSizePolicy.MinimumExpanding, QSizePolicy.Minimum
)
self.openButton.setSizePolicy(QSizePolicy.Minimum, QSizePolicy.Minimum)
except IndexError:
pass
elif propertyName == "showDialogButton":
if newValue:
self.openButton.show()
else:
self.openButton.hide()
elif propertyName == "showBox":
if newValue:
self.containerBox.setFrameShape(self.containerBox.GroupBoxPanel)
self.containerBox.setInsideMargin(4)
self.containerBox.setInsideSpacing(0)
self.containerBox.setTitle("Available motors")
else:
self.containerBox.setFrameShape(self.containerBox.NoFrame)
self.containerBox.setInsideMargin(0)
self.containerBox.setInsideSpacing(0)
self.containerBox.setTitle("")
else:
BaseComponents.BlissWidget.propertyChanged(
self, propertyName, oldValue, newValue
)
def propertyChanged(self, propertyName, oldValue, newValue):
# print "propertyChanged",propertyName,newValue
if propertyName == "mnemonic":
if self.listObj is not None:
self.disconnect(self.listObj, PYSIGNAL("connected"),
self.connected)
self.disconnect(self.listObj, PYSIGNAL("disconnected"),
self.disconnected)
self.disconnect(self.listObj, PYSIGNAL("motorListChanged"),
self.motorsChanged)
self.listObj = self.getHardwareObject(newValue)
if self.listObj is not None:
self.connect(self.listObj, PYSIGNAL("connected"),
self.connected)
self.connect(self.listObj, PYSIGNAL("disconnected"),
self.disconnected)
self.connect(self.listObj, PYSIGNAL("motorListChanged"),
self.motorsChanged)
if self.listObj.isConnected():
self.connected()
else:
self.disconnected()
self.motorsChanged(self.listObj.getSpecVersion(),
self.listObj.getMotorList())
else:
self.disconnected()
self.motorsChanged(None, None)
elif propertyName == "icons":
icons_list = newValue.split()
try:
self.openButton.setPixmap(Icons.load(icons_list[0]))
self.motorsList.setSizePolicy(QSizePolicy.MinimumExpanding,
QSizePolicy.Minimum)
self.openButton.setSizePolicy(QSizePolicy.Minimum,
QSizePolicy.Minimum)
except IndexError:
pass
elif propertyName == "showDialogButton":
if newValue:
self.openButton.show()
else:
self.openButton.hide()
elif propertyName == "showBox":
if newValue:
self.containerBox.setFrameShape(
self.containerBox.GroupBoxPanel)
self.containerBox.setInsideMargin(4)
self.containerBox.setInsideSpacing(0)
self.containerBox.setTitle("Available motors")
else:
self.containerBox.setFrameShape(self.containerBox.NoFrame)
self.containerBox.setInsideMargin(0)
self.containerBox.setInsideSpacing(0)
self.containerBox.setTitle("")
else:
BaseComponents.BlissWidget.propertyChanged(self, propertyName,
oldValue, newValue)
def __init__(self, parent, layout, initialValue, title='', prefix=''):
QVBox.__init__(self, parent)
self.prefix = prefix
self.value = initialValue
self.lblTitle = QLabel(title, self)
selectionBox = QHBox(self)
self.editionBox = QHBox(selectionBox)
if layout == stepEditor.RightLayout:
self.cmdSelectValue = QPushButton(prefix + str(initialValue),
selectionBox)
self.cmdEditValue = QPushButton('...', selectionBox)
else:
self.cmdEditValue = QPushButton('...', selectionBox)
self.cmdSelectValue = QPushButton(prefix + str(initialValue),
selectionBox)
self.txtNewValue = QLineEdit(self.editionBox)
self.cmdOK = QPushButton(self.editionBox)
self.cmdCancel = QPushButton(self.editionBox)
self.cmdCancel.setPixmap(
Icons.load('button_cancel_small')) #QPixmap(Icons.tinyCancel))
self.cmdOK.setPixmap(Icons.load('button_ok_small')) #Icons.tinyOK))
self.editionBox.hide()
self.lblTitle.hide()
self.setFocusProxy(self.txtNewValue)
self.txtNewValue.setFixedWidth(self.fontMetrics().width(' 888.888 '))
self.cmdEditValue.setFixedWidth(self.fontMetrics().width(' ... '))
self.cmdSelectValue.setFixedWidth(
self.fontMetrics().width(prefix + ' 888.888 '))
self.cmdSelectValue.setAutoDefault(False)
self.cmdOK.setFixedWidth(20)
self.cmdCancel.setFixedWidth(20)
self.editionBox.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
self.connect(self.cmdSelectValue, SIGNAL('clicked()'),
self.cmdSelectValueClicked)
self.connect(self.cmdEditValue, SIGNAL('clicked()'),
self.cmdEditValueClicked)
self.connect(self.txtNewValue, SIGNAL('returnPressed()'),
self.validateNewValue)
self.connect(self.cmdOK, SIGNAL('clicked()'), self.validateNewValue)
self.connect(self.cmdCancel, SIGNAL('clicked()'), self.endEdit)
def createEditor(self):
validationPanel = QHBox(self.table().viewport(), "validationPanel")
self.OK = QToolButton(validationPanel)
self.OK.setAutoRaise(True)
# QPixmap(Icons.tinyOK)))
self.OK.setIconSet(QIconSet(Icons.load("button_ok_small")))
self.Cancel = QToolButton(validationPanel)
self.Cancel.setAutoRaise(True)
# QPixmap(Icons.tinyCancel)))
self.Cancel.setIconSet(QIconSet(Icons.load("button_cancel_small")))
self.Reset = QToolButton(validationPanel)
# QPixmap(Icons.defaultXPM)))
self.Reset.setIconSet(QIconSet(Icons.load("button_default_small")))
self.Reset.setAutoRaise(True)
self.setEnabled(False)
return validationPanel
def setIcons(self,icons):
icons_list=icons.split()
try:
self.buttonCentre.setIcons(icons_list[0],icons_list[1])
except IndexError:
pass
try:
self.buttonAccept.setPixmap(Icons.load(icons_list[2]))
except IndexError:
pass
try:
self.buttonSnapshot.setPixmap(Icons.load(icons_list[3]))
except IndexError:
pass
try:
self.buttonReject.setPixmap(Icons.load(icons_list[4]))
except IndexError:
pass
def addPendingConnection(self, connectionDict):
newItem = QListViewItem(
self.lstConnections, '', connectionDict['senderWindow'],
connectionDict['senderObject'], connectionDict['signal'],
connectionDict['receiverWindow'], connectionDict['receiverObject'],
connectionDict['slot'])
newItem.setPixmap(0, Icons.load('button_ok_small'))
self.lstConnections.insertItem(newItem)
def setIcons(self, icons):
icons_list = icons.split()
try:
self.startScanButton.setIcons(icons_list[0], icons_list[1])
except IndexError:
pass
try:
self.acceptButton.setPixmap(Icons.load(icons_list[2]))
except IndexError:
pass
try:
self.resetButton.setPixmap(Icons.load(icons_list[3]))
except IndexError:
pass
try:
self.browseButton.setPixmap(Icons.load(icons_list[4]))
except IndexError:
pass
def setIcons(self, icons):
icons_list = icons.split()
try:
self.buttonCentre.setIcons(icons_list[0], icons_list[1])
except IndexError:
pass
try:
self.buttonAccept.setPixmap(Icons.load(icons_list[2]))
except IndexError:
pass
try:
self.buttonSnapshot.setPixmap(Icons.load(icons_list[3]))
except IndexError:
pass
try:
self.buttonReject.setPixmap(Icons.load(icons_list[4]))
except IndexError:
pass
def __init__(self, parent):
QWidget.__init__(self, parent)
self.oldPositions = [] # history of motor positions
lblMove = QLabel("go to ", self)
self.txtMove = QLineEdit("", self)
self.cmdMove = QPushButton("", self)
self.cmdGoBack = QPushButton("", self)
self.cmdStop = QPushButton("", self)
self.txtMove.setFixedWidth(self.txtMove.fontMetrics().width("8888.8888"))
self.cmdMove.setToggleButton(True)
# QPixmap(Icons.stopXPM_small))
self.cmdStop.setPixmap(Icons.load("stop_small"))
self.cmdStop.setEnabled(False)
# QPixmap(Icons.gobackXPM_small))
self.cmdGoBack.setPixmap(Icons.load("goback_small"))
# QPixmap(Icons.moveXPM_small))
self.cmdMove.setPixmap(Icons.load("move_small"))
self.cmdGoBack.setEnabled(False)
self.connect(self.cmdMove, SIGNAL("clicked()"), self.cmdMoveClicked)
self.connect(self.cmdStop, SIGNAL("clicked()"), PYSIGNAL("stopMotor"))
self.connect(self.txtMove, SIGNAL("returnPressed()"), self.txtMoveReturnPressed)
self.connect(
self.txtMove,
SIGNAL("textChanged(const QString &)"),
self.txtMoveTextChanged,
)
self.connect(self.cmdGoBack, SIGNAL("clicked()"), self.cmdGoBackClicked)
QHBoxLayout(self)
self.layout().addItem(
QSpacerItem(0, 0, QSizePolicy.Expanding, QSizePolicy.Fixed)
)
self.layout().addWidget(lblMove)
self.layout().addWidget(self.txtMove)
self.layout().addWidget(self.cmdMove)
self.layout().addWidget(self.cmdGoBack)
self.layout().addWidget(self.cmdStop)
self.layout().addItem(
QSpacerItem(0, 0, QSizePolicy.Expanding, QSizePolicy.Fixed)
)
def propertyChanged(self, propertyName, oldValue, newValue):
if propertyName == "icons":
icons_list = newValue.split()
try:
self.browseButton.setPixmap(Icons.load(icons_list[0]))
except IndexError:
pass
try:
self.reloadButton.setPixmap(Icons.load(icons_list[1]))
except IndexError:
pass
elif propertyName == "dataCollect":
if self.collectObj is not None:
self.disconnect(
self.collectObj, PYSIGNAL("progressUpdate"), self.imageCollected
)
self.collectObj = self.getHardwareObject(newValue)
if self.collectObj is not None:
self.connect(
self.collectObj, PYSIGNAL("progressUpdate"), self.imageCollected
)
elif propertyName == "fileHistorySize":
self.imageFilename.setMaxCount(newValue)
elif propertyName == "showLegends":
if not newValue:
self.lineSelection._graph.setTitle = lambda t: mySetTitle(
self.lineSelection._graph, t
)
self.lineSelection._graph.enableAxis(
self.lineSelection._graph.xTop, False
)
self.lineSelection._graph.enableAxis(
self.lineSelection._graph.xBottom, False
)
elif propertyName == "graphFixedHeight":
if newValue != -1:
self.lineSelection._graph.setFixedHeight(newValue)
else:
BlissWidget.propertyChanged(self, propertyName, oldValue, newValue)