def init_primitives(self):
origin = DPoint(0, 0)
# square box that clears out the area of the mark
self.primitives["empty_box"] = Rectangle(DPoint(
-self.leaf_outer, -self.leaf_outer),
2 * self.leaf_outer,
2 * self.leaf_outer,
inverse=True)
self.primitives["cross"] = Cross(
DPoint(-self.cross_out_a / 2, -self.cross_out_a / 2),
self.cross_in_a, self.cross_out_a)
Z = CPWParameters(self.leaf_outer - self.leaf_inner, 0)
for i in range(self.leafs_N):
start_angle = i * (self.leaf_angle +
self.empty_leaf_angle) - self.leaf_angle / 2
trans = DCplxTrans(1, start_angle + 90, False, 0, -self.avg_r)
self.primitives["leaf_" + str(i)] = CPW_arc(Z,
origin,
self.avg_r,
self.leaf_angle * pi /
180,
trans_in=trans)
Z_empty = CPWParameters(0, self.empty_rings_width / 2)
for i in range(1, self.empty_rings_N + 1):
r = self.leaf_inner + (self.leaf_outer - self.leaf_inner) / (
self.empty_rings_N + 1) * i
self.primitives["empty_ring_" + str(i)] = CPW_arc(
Z_empty, DVector(0, -r), r, 2 * pi)
def init_primitives(self):
self.arc1 = CPW_arc(self.Z0, DPoint(0, 0), -self.r, pi / 2)
self.primitives["arc1"] = self.arc1
# making coil
name = "coil0"
setattr(self, name, Coil_type_1(self.Z0, DPoint(0, 0), self.L_coupling, self.r, self.L1))
self.primitives[name] = getattr(self, name)
# coils filling
for i in range(self.N):
name = "coil" + str(i + 1)
prev_coil_end = getattr(self, "coil" + str(i)).connections[-1]
setattr(
self, name,
Coil_type_1( self.Z0, prev_coil_end, self.L1, self.r, self.L1)
)
self.primitives[name] = getattr(self, name)
# draw the "tail"
self.arc_tail = CPW_arc(self.Z0, self.primitives["coil" + str(self.N)].end, -self.L1 / 2, -pi / 2)
self.cop_tail = CPW(self.Z0.width, self.Z0.gap, self.arc_tail.end, self.arc_tail.end - DPoint(0, self.L2))
# tail face is separated from ground by `b = width + 2*gap`
self.cop_open_end = CPW(0, self.Z0.b / 2, self.cop_tail.end, self.cop_tail.end - DPoint(0, self.Z0.b))
self.primitives["arc_tail"] = self.arc_tail
self.primitives["cop_tail"] = self.cop_tail
self.primitives["cop_open_end"] = self.cop_open_end
self.connections = [DPoint(0, 0), self.cop_tail.end]
self.angle_connections = [0, self.cop_tail.alpha_end]
def init_primitives(self):
name = "coil0"
setattr(
self, name,
Coil_type_1(self.Z0, DPoint(0, 0), self.L_coupling, self.r,
self.L1))
self.primitives[name] = getattr(self, name)
# coils filling
for i in range(self.N):
name = "coil" + str(i + 1)
setattr(
self, name,
Coil_type_1(
self.Z0,
DPoint(-self.L1 + self.L_coupling,
-(i + 1) * (4 * self.r)), self.L1, self.r, self.L1))
self.primitives[name] = getattr(self, name)
# draw the "tail"
self.arc_tail = CPW_arc(self.Z0,
self.primitives["coil" + str(self.N)].end,
-self.L1 / 2, -pi / 2)
self.cop_tail = CPW(self.Z0.width, self.Z0.gap, self.arc_tail.end,
self.arc_tail.end - DPoint(0, self.L2))
self.cop_open_end = CPW(0, self.Z0.b / 2, self.cop_tail.end,
self.cop_tail.end - DPoint(0, self.Z0.b))
self.primitives["arc_tail"] = self.arc_tail
self.primitives["cop_tail"] = self.cop_tail
self.primitives["cop_open_end"] = self.cop_open_end
self.connections = [DPoint(0, 0), self.cop_tail.end]
self.angle_connections = [0, self.cop_tail.alpha_end]
def init_primitives(self):
self.arc1 = CPW_arc(self.Z0, DPoint(0, 0), -self.r, pi / 2)
self.primitives["arc1"] = self.arc1
p1 = self.arc1.end
p2 = self.arc1.end + DPoint(0, -self.L0)
self.cop_end_open = CPW(start=p1, end=p2, cpw_params=self.Z0)
# open end tail face is separated from ground by `b = width + 2*gap`
self.cop_end_open_gap = CPW(
0, self.Z0.b / 2, self.cop_end_open.end,
self.cop_end_open.end - DPoint(0, self.Z0.b))
self.primitives["cpw_hor_end_open"] = self.cop_end_open
self.primitives["cop_end_open_gap"] = self.cop_end_open_gap
# making coil
name = "coil0"
setattr(
self, name,
Coil_type_1(self.Z0, DPoint(0, 0), self.L_coupling, self.r,
self.L1))
self.primitives[name] = getattr(self, name)
# coils filling
for i in range(self.N):
name = "coil" + str(i + 1)
setattr(
self, name,
Coil_type_1(
self.Z0,
DPoint(-self.L1 + self.L_coupling,
-(i + 1) * (4 * self.r)), self.L1, self.r, self.L1))
self.primitives[name] = getattr(self, name)
# draw the shorted "tail"
self.arc_end_shorted = CPW_arc(
self.Z0, self.primitives["coil" + str(self.N)].end, -self.L1 / 2,
-pi / 2)
self.cop_end_shoted = CPW(
self.Z0.width, self.Z0.gap, self.arc_end_shorted.end,
self.arc_end_shorted.end - DPoint(0, self.L2))
self.primitives["arc_end_shorted"] = self.arc_end_shorted
self.primitives["cop_end_shoted"] = self.cop_end_shoted
self.connections = [DPoint(0, 0), self.cop_end_open.end]
self.angle_connections = [0, self.cop_end_open.alpha_end]
def init_primitives(self):
self.arc1 = CPW_arc(self.Z0, DPoint(0, 0), -self.r, pi / 2)
self.primitives["arc1"] = self.arc1
p1 = self.arc1.end
p2 = self.arc1.end + DPoint(0, -self.L0)
self.cop_vertical = CPW(start=p1, end=p2, cpw_params=self.Z0)
# open end tail face is separated from ground by `b = width + 2*gap`
self.primitives["cop_vertical"] = self.cop_vertical
# draw the open-circuited "tail"
self.cpw_end_open_RLPath = CPW_RL_Path(
self.cop_vertical.end, self.tail_shape, cpw_parameters=self.Z0,
turn_radiuses=self.tail_turn_radiuses,
segment_lengths=self.tail_segment_lengths,
turn_angles=self.tail_turn_angles,
trans_in=self.tail_trans_in
)
self.primitives["cpw_end_open_RLPath"] = self.cpw_end_open_RLPath
self.cpw_end_open_gap = CPW(
0, self.Z0.b / 2,
self.cpw_end_open_RLPath.end,
self.cpw_end_open_RLPath.end - DPoint(0, self.Z0.b)
)
self.primitives["cpw_end_open_gap"] = self.cpw_end_open_gap
# making coil
name = "coil0"
setattr(self, name, Coil_type_1(self.Z0, DPoint(0, 0), self.L_coupling, self.r, self.L1))
self.primitives[name] = getattr(self, name)
# coils filling
for i in range(self.N):
name = "coil" + str(i + 1)
setattr(self, name,
Coil_type_1(self.Z0, DPoint(-self.L1 + self.L_coupling, -(i + 1) * (4 * self.r)), self.L1, self.r,
self.L1))
self.primitives[name] = getattr(self, name)
self.connections = [DPoint(0, 0), self.cpw_end_open_RLPath.end]
self.angle_connections = [0, self.cpw_end_open_RLPath.alpha_end]