def makeGrogg2():
GPIO.output(soda_2, False)
GPIO.output(liquor_2, False)
sprit = Timer(1.9, turnOffBooze2)
virke = Timer(8.5, turnOffSoda2)
sprit.start()
virke.start()
def api_leds_control(color):
if request.method == "POST":
if color in LEDS:
#GPIO.output(18,True)
GPIO.output(LEDS[color], int(request.data.get("state")))
return {color: GPIO.getStatePinOut(LEDS[color])}
def makeGrogg4():
GPIO.output(liquor_4, False)
sprit = Timer(1.9, turnOffBooze4)
sprit.start()
virke.start()
def makeGrogg1():
GPIO.output(soda_1, False)
GPIO.output(liquor_1, False)
sprit = Timer(1.9, turnOffBooze1)
virke = Timer(8.5, turnOffSoda1)
sprit.start()
virke.start()
def control(pin, action):
if pin == 'fourteen':
actuator = 14
if pin == 'fifteen':
actuator = 15
if pin == 'eighteen':
actuator = 18
if pin == 'twentythree':
actuator = 23
if pin == 'twentyfour':
actuator = 24
if pin == 'twentyfive':
actuator = 25
if pin == 'eight':
actuator = 8
if pin == 'seven':
actuator = 7
if pin == 'twelve':
actuator = 12
if pin == 'sixteen':
actuator = 16
if pin == 'twenty':
actuator = 20
if pin == 'twentyone':
actuator = 21
if pin == 'two':
actuator = 2
if pin == 'three':
actuator = 3
if pin == 'four':
actuator = 4
if pin == 'seventeen':
actuator = 17
if pin == 'twentyseven':
actuator = 27
if pin == 'twentytwo':
actuator = 22
if pin == 'ten':
actuator = 10
if pin == 'nine':
actuator = 9
if pin == 'eleven':
actuator = 11
if pin == 'five':
actuator = 5
if pin == 'six':
actuator = 6
if pin == 'thirteen':
actuator = 13
if pin == 'nineteen':
actuator = 19
if pin == 'twentysix':
actuator = 26
if action == 'on':
GPIO.output(actuator, GPIO.HIGH)
if action == 'off':
GPIO.output(actuator, GPIO.LOW)
def stop(self):
self.mirror.stop()
self.led_strip.stop()
self.sound.stop(100)
# Let the thread finish
if self.mirror.thr is not None:
while self.mirror.thr.isAlive():
Logger.write.info("waiting for thread to finish")
pass
GPIO.output(RELAYS[1], RELAY_OFF)
def state_changed(self, state):
Logger.write.info("pin status: " + str(state))
if state == True:
if not self.sound.is_busy():
self.sound.play()
else:
Logger.write.info("Sound already playing")
# time.sleep(1.5)
# GPIO.output(RELAYS[1], RELAY_ON) # relay 1
# time.sleep(2)
self.led_strip.run()
self.mirror.run()
else:
self.mirror.stop()
self.led_strip.stop()
time.sleep(1.5)
self.sound.stop()
GPIO.output(RELAYS[1], RELAY_OFF)
def init_gpio(relay_list, quiet=True):
Logger.write.info("Initializing relays, please wait")
GPIO.setmode(GPIO.BCM)
GPIO.setup(SENSOR_GPIO_PIN, GPIO.IN, pull_up_down=SENSOR_PUD)
for pin in relay_list:
GPIO.setup(pin, GPIO.OUT)
GPIO.output(pin, RELAY_OFF)
if not quiet:
for pin in relay_list: # cycle individual
GPIO.output(pin, RELAY_ON)
time.sleep(0.25)
GPIO.output(pin, RELAY_OFF)
time.sleep(0)
for pin in relay_list: # all on
GPIO.output(pin, RELAY_ON)
time.sleep(1.0)
for pin in relay_list: # all off
GPIO.output(pin, RELAY_OFF)
def turnOffSoda2():
GPIO.output(soda_2, True)
def mfr():
GPIO.output(b, True)
GPIO.output(d, False)
def lightoff(LEDS, i):
GPIO.output(LEDS[i], GPIO.LOW)
def handle_door(req):
rospy.loginfo('sending open door command to door %s', req.door_id)
if req.door_id == 1:
GPIO.output(2, GPIO.HIGH)
time.sleep(1)
GPIO.output(2, GPIO.LOW)
elif req.door_id == 2:
GPIO.output(3, GPIO.HIGH)
time.sleep(1)
GPIO.output(3, GPIO.LOW)
elif req.door_id == 3:
GPIO.output(4, GPIO.HIGH)
time.sleep(1)
GPIO.output(4, GPIO.LOW)
return True
##import RPi.GPIO as GPIO
from EmulatorGUI import GPIO
import time
#asigno el nodo al puerto GPIO
GPIO.setmode(GPIO.BCM)
# Configuro si el pin es entrada o salida
GPIO.setup(7, GPIO.OUT)
while True:
# envio la señal por ese puerto
GPIO.output(7, True)
time.sleep(1)
GPIO.output(7, False)
time.sleep(1)
def Main():
try:
GPIO.setmode(GPIO.BCM)
GPIO.setwarnings(False)
GPIO.setup(14, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) # Kasa Açıldı
GPIO.setup(15, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) # Ev Kapısı Açıldı
GPIO.setup(18, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) # Araba Açık
GPIO.setup(25, GPIO.IN,
pull_up_down=GPIO.PUD_DOWN) # Araba Kapısı Kapandı
GPIO.setup(16, GPIO.IN,
pull_up_down=GPIO.PUD_DOWN) # Ev Kapısı Kapandı
GPIO.setup(8, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) # Kasa Kapandı
GPIO.setup(4, GPIO.OUT,
initial=GPIO.HIGH) # Kasa Açık 1, Kasa Kapalı 0
GPIO.setup(9, GPIO.OUT, initial=GPIO.LOW) # Ev Açık 1, Ev Kapalı 0
GPIO.setup(17, GPIO.OUT,
initial=GPIO.HIGH) # Araba Açık 1, Araba Kapalı 0
GPIO.setup(19, GPIO.OUT, initial=GPIO.LOW) # Nem kontrol
GPIO.output(4, GPIO.LOW)
GPIO.output(9, GPIO.LOW)
GPIO.output(17, GPIO.LOW)
Kasakapaliguncelle()
Evkapaliguncelle()
Arabakapaliguncelle()
while (True):
if (GPIO.input(14) == True):
GPIO.output(4, GPIO.HIGH)
Kasaacikguncelle()
if (GPIO.input(8) == True):
GPIO.output(4, GPIO.LOW)
Kasakapaliguncelle()
if (GPIO.input(15) == True):
GPIO.output(9, GPIO.HIGH)
Evacikguncelle()
if (GPIO.input(16) == True):
GPIO.output(9, GPIO.LOW)
Evkapaliguncelle()
if (GPIO.input(18) == True):
GPIO.output(17, GPIO.HIGH)
Arabaacikguncelle()
if (GPIO.input(25) == True):
GPIO.output(17, GPIO.LOW)
Arabakapaliguncelle()
con.close()
except Exception as ex:
traceback.print_exc()
finally:
GPIO.cleanup()
def stop():
GPIO.output(a, False)
GPIO.output(b, False)
GPIO.output(c, False)
GPIO.output(d, False)
def mbr():
GPIO.output(d, True)
GPIO.output(b, False)
def mbl():
GPIO.output(c, True)
GPIO.output(a, False)
def makeGrogg3():
GPIO.output(liquor_3, False)
sprit = Timer(1.9, turnOffBooze3)
sprit.start()
def turnOffBooze3():
GPIO.output(liquor_3, True)
def turnOffBooze4():
GPIO.output(liquor_4, True)
def _thread_func(self):
current_time_ratio = 0.0 # How far into the timeslots we currently are, from 0 to 1
time_ratio_advance = 1.0 / self.PWM_TIMESLOTS
while time.sleep(self.SLEEP_DELAY):
# Set LEDs to appropriate values
for seg in range(LED_NUM_SEGS):
for color in LED_COLORS:
# IMPORTANT: Implicitly dictates pin order for LEDs after shift register below
if self.state[seg][color] > current_time_ratio:
# Push a high on the shift register
GPIO.output(DATA_PIN, GPIO.high)
time.sleep(self.TRIGGER_DELAY)
GPIO.output(LATCH_PIN, GPIO.high)
time.sleep(self.TRIGGER_DELAY)
GPIO.output(LATCH_PIN, GPIO.low)
time.sleep(self.TRIGGER_DELAY)
GPIO.output(DATA_PIN, GPIO.low)
else:
# Push a low on the shift register
GPIO.output(DATA_PIN, GPIO.low)
time.sleep(self.TRIGGER_DELAY)
GPIO.output(LATCH_PIN, GPIO.high)
time.sleep(self.TRIGGER_DELAY)
GPIO.output(LATCH_PIN, GPIO.low)
time.sleep(self.TRIGGER_DELAY)
GPIO.output(DATA_PIN, GPIO.low)
# Push updated states out to LED strip
time.sleep(self.TRIGGER_DELAY)
GPIO.output(PUSH_OUT_PIN, GPIO.high)
time.sleep(self.TRIGGER_DELAY)
GPIO.output(PUSH_OUT_PIN, GPIO.low)
# Increment segment, resetting upon reaching 1 to 0
current_time_ratio += time_ratio_advance
if current_time_ratio == 1.0:
current_time_ratio = 0.0
def turnOffBooze1():
GPIO.output(liquor_1, True)
def control(pin, action):
contract_instance = w3.eth.contract(abi=abi,
address=contract_address,
ContractFactoryClass=ConciseContract)
if pin == 'fourteen':
actuator = 14
if pin == 'fifteen':
actuator = 15
if pin == 'eighteen':
actuator = 18
if pin == 'twentythree':
actuator = 23
if pin == 'twentyfour':
actuator = 24
if pin == 'twentyfive':
actuator = 25
if pin == 'eight':
actuator = 8
if pin == 'seven':
actuator = 7
if pin == 'twelve':
actuator = 12
if pin == 'sixteen':
actuator = 16
if pin == 'twenty':
actuator = 20
if pin == 'twentyone':
actuator = 21
if pin == 'two':
actuator = 2
if pin == 'three':
actuator = 3
if pin == 'four':
actuator = 4
if pin == 'seventeen':
actuator = 17
if pin == 'twentyseven':
actuator = 27
if pin == 'twentytwo':
actuator = 22
if pin == 'ten':
actuator = 10
if pin == 'nine':
actuator = 9
if pin == 'eleven':
actuator = 11
if pin == 'five':
actuator = 5
if pin == 'six':
actuator = 6
if pin == 'thirteen':
actuator = 13
if pin == 'nineteen':
actuator = 19
if pin == 'twentysix':
actuator = 26
if action == 'on':
config = 1
if action == 'off':
config = 0
contract_instance.control(actuator,
config,
transact={'from': w3.eth.accounts[0]})
print("Transaction its Way..")
y = format(contract_instance.pinStatus(actuator))
print(y)
if y == "1":
GPIO.output(actuator, GPIO.HIGH)
else:
GPIO.output(actuator, GPIO.LOW)
templateData = {'title': "GPIO Control"}
return render_template('index.html', **templateData)
def turnOffSoda1():
GPIO.output(soda_1, True)
def main():
GPIO.setmode(GPIO.BCM)
GPIO.setup(17, GPIO.OUT)
GPIO.setup(18, GPIO.OUT)
GPIO.setup(22, GPIO.OUT)
GPIO.setup(23, GPIO.OUT)
print('Red LED on')
GPIO.output(17, True)
time.sleep(3)
GPIO.output(17, False)
time.sleep(1)
print('Yellow LED on')
GPIO.output(18, True)
time.sleep(3)
GPIO.output(18, False)
time.sleep(1)
print('Green LED on')
GPIO.output(22, True)
time.sleep(3)
GPIO.output(22, False)
time.sleep(1)
print('Blue LED on')
GPIO.output(23, True)
time.sleep(3)
GPIO.output(23, False)
##import RPi.GPIO as GPIO
from EmulatorGUI import GPIO
import time
GPIO.setmode(GPIO.BCM)
GPIO.setup(14, GPIO.OUT)
GPIO.setup(15, GPIO.IN)
while True:
if GPIO.input(14):
GPIO.output(15, False)
else:
GPIO.output(15, True)
def lighton(LEDS, i):
GPIO.output(LEDS[i], GPIO.HIGH)
def turnOffBooze2():
GPIO.output(liquor_2, True)
def Main():
try:
GPIO.setmode(GPIO.BCM)
GPIO.setwarnings(False)
GPIO.setup(4, GPIO.OUT)
GPIO.setup(17, GPIO.OUT, initial=GPIO.LOW)
GPIO.setup(18, GPIO.OUT, initial=GPIO.LOW)
GPIO.setup(21, GPIO.OUT, initial=GPIO.LOW)
GPIO.setup(23, GPIO.IN, pull_up_down=GPIO.PUD_UP)
GPIO.setup(15, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(24, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
GPIO.setup(26, GPIO.IN)
while (True):
if (GPIO.input(23) == False):
GPIO.output(4, GPIO.HIGH)
GPIO.output(17, GPIO.HIGH)
time.sleep(1)
if (GPIO.input(15) == True):
GPIO.output(18, GPIO.HIGH)
GPIO.output(21, GPIO.HIGH)
time.sleep(1)
if (GPIO.input(24) == True):
GPIO.output(18, GPIO.LOW)
GPIO.output(21, GPIO.LOW)
time.sleep(1)
if (GPIO.input(26) == True):
GPIO.output(4, GPIO.LOW)
GPIO.output(17, GPIO.LOW)
time.sleep(1)
except Exception as ex:
traceback.print_exc()
finally:
GPIO.cleanup() #this ensures a clean exit
def mfl():
GPIO.output(a, True)
GPIO.output(c, True)