def __init__(self,object):
# the panel has a tree widget that contains categories
# for the subcomponents, such as additions, subtractions.
# the categories are shown only if they are not empty.
form_class, base_class = uic.loadUiType(FreeCAD.getHomePath() + "Mod/Fem/ShowDisplacement.ui")
self.obj = object
self.formUi = form_class()
self.form = QtGui.QWidget()
self.formUi.setupUi(self.form)
#Connect Signals and Slots
QtCore.QObject.connect(self.formUi.radioButton_Displacement, QtCore.SIGNAL("clicked(bool)"), self.displacementClicked)
QtCore.QObject.connect(self.formUi.radioButton_Stress, QtCore.SIGNAL("clicked(bool)"), self.stressClicked)
QtCore.QObject.connect(self.formUi.radioButton_NoColor, QtCore.SIGNAL("clicked(bool)"), self.noColorClicked)
QtCore.QObject.connect(self.formUi.checkBox_ShowDisplacement, QtCore.SIGNAL("clicked(bool)"), self.showDisplacementClicked)
QtCore.QObject.connect(self.formUi.verticalScrollBar_Factor, QtCore.SIGNAL("valueChanged(int)"), self.sliderValue)
QtCore.QObject.connect(self.formUi.spinBox_SliderFactor, QtCore.SIGNAL("valueChanged(double)"), self.sliderMaxValue)
QtCore.QObject.connect(self.formUi.spinBox_DisplacementFactor, QtCore.SIGNAL("valueChanged(double)"), self.displacementFactorValue)
self.DisplacementObject = None
self.StressObject = None
self.update()
def __init__(self,object):
# the panel has a tree widget that contains categories
# for the subcomponents, such as additions, subtractions.
# the categories are shown only if they are not empty.
form_class, base_class = uic.loadUiType(FreeCAD.getHomePath() + "Mod/Fem/MechanicalAnalysis.ui")
self.CalculixBinary = FreeCAD.getHomePath() +'bin/ccx.exe'
self.TempDir = FreeCAD.ActiveDocument.TransientDir.replace('\\','/') + '/FemAnl_'+ object.Uid[-4:]
if not os.path.isdir(self.TempDir):
os.mkdir(self.TempDir)
self.obj = object
self.formUi = form_class()
self.form = QtGui.QWidget()
self.formUi.setupUi(self.form)
#self.params = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/Fem")
self.Calculix = QtCore.QProcess()
self.Timer = QtCore.QTimer()
self.Timer.start(300)
self.OutStr = ''
#Connect Signals and Slots
QtCore.QObject.connect(self.formUi.toolButton_chooseOutputDir, QtCore.SIGNAL("clicked()"), self.chooseOutputDir)
QtCore.QObject.connect(self.formUi.pushButton_generate, QtCore.SIGNAL("clicked()"), self.run)
QtCore.QObject.connect(self.Calculix, QtCore.SIGNAL("started()"), self.calculixStarted)
QtCore.QObject.connect(self.Calculix, QtCore.SIGNAL("finished(int)"), self.calculixFinished)
QtCore.QObject.connect(self.Timer, QtCore.SIGNAL("timeout()"), self.UpdateText)
self.update()
def __init__(self,obj):
# the panel has a tree widget that contains categories
# for the subcomponents, such as additions, subtractions.
# the categories are shown only if they are not empty.
form_class, base_class = uic.loadUiType(FreeCAD.getHomePath() + "Mod/Fem/MechanicalMaterial.ui")
self.obj = obj
self.formUi = form_class()
self.form = QtGui.QWidget()
self.formUi.setupUi(self.form)
self.params = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/Fem")
QtCore.QObject.connect(self.formUi.pushButton_MatWeb, QtCore.SIGNAL("clicked()"), self.goMatWeb)
QtCore.QObject.connect(self.formUi.comboBox_MaterialsInDir, QtCore.SIGNAL("currentIndexChanged(int)"), self.chooseMat)
self.update()
def __init__(self,object):
# the panel has a tree widget that contains categories
# for the subcomponents, such as additions, subtractions.
# the categories are shown only if they are not empty.
form_class, base_class = uic.loadUiType(FreeCAD.getHomePath() + "Mod/Fem/MechanicalAnalysis.ui")
self.obj = object
self.formUi = form_class()
self.form = QtGui.QWidget()
self.formUi.setupUi(self.form)
self.params = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/Machining_Distortion")
#Connect Signals and Slots
QtCore.QObject.connect(self.formUi.toolButton_chooseOutputDir, QtCore.SIGNAL("clicked()"), self.chooseOutputDir)
QtCore.QObject.connect(self.formUi.pushButton_generate, QtCore.SIGNAL("clicked()"), self.run)
self.update()
def __init__(self, object):
# the panel has a tree widget that contains categories
# for the subcomponents, such as additions, subtractions.
# the categories are shown only if they are not empty.
form_class, base_class = uic.loadUiType(FreeCAD.getHomePath() +
"Mod/Fem/ShowDisplacement.ui")
self.obj = object
self.formUi = form_class()
self.form = QtGui.QWidget()
self.formUi.setupUi(self.form)
#Connect Signals and Slots
QtCore.QObject.connect(self.formUi.radioButton_Displacement,
QtCore.SIGNAL("clicked(bool)"),
self.displacementClicked)
QtCore.QObject.connect(self.formUi.radioButton_Stress,
QtCore.SIGNAL("clicked(bool)"),
self.stressClicked)
QtCore.QObject.connect(self.formUi.radioButton_NoColor,
QtCore.SIGNAL("clicked(bool)"),
self.noColorClicked)
QtCore.QObject.connect(self.formUi.checkBox_ShowDisplacement,
QtCore.SIGNAL("clicked(bool)"),
self.showDisplacementClicked)
QtCore.QObject.connect(self.formUi.verticalScrollBar_Factor,
QtCore.SIGNAL("valueChanged(int)"),
self.sliderValue)
QtCore.QObject.connect(self.formUi.spinBox_SliderFactor,
QtCore.SIGNAL("valueChanged(double)"),
self.sliderMaxValue)
QtCore.QObject.connect(self.formUi.spinBox_DisplacementFactor,
QtCore.SIGNAL("valueChanged(double)"),
self.displacementFactorValue)
self.DisplacementObject = None
self.StressObject = None
self.update()
def __init__(self, object):
# the panel has a tree widget that contains categories
# for the subcomponents, such as additions, subtractions.
# the categories are shown only if they are not empty.
form_class, base_class = uic.loadUiType(
FreeCAD.getHomePath() + "Mod/Fem/MechanicalAnalysis.ui")
self.CalculixBinary = FreeCAD.getHomePath() + 'bin/ccx.exe'
self.TempDir = FreeCAD.ActiveDocument.TransientDir.replace(
'\\', '/') + '/FemAnl_' + object.Uid[-4:]
if not os.path.isdir(self.TempDir):
os.mkdir(self.TempDir)
self.obj = object
self.formUi = form_class()
self.form = QtGui.QWidget()
self.formUi.setupUi(self.form)
#self.params = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/Fem")
self.Calculix = QtCore.QProcess()
self.Timer = QtCore.QTimer()
self.Timer.start(300)
self.OutStr = ''
#Connect Signals and Slots
QtCore.QObject.connect(self.formUi.toolButton_chooseOutputDir,
QtCore.SIGNAL("clicked()"),
self.chooseOutputDir)
QtCore.QObject.connect(self.formUi.pushButton_generate,
QtCore.SIGNAL("clicked()"), self.run)
QtCore.QObject.connect(self.Calculix, QtCore.SIGNAL("started()"),
self.calculixStarted)
QtCore.QObject.connect(self.Calculix, QtCore.SIGNAL("finished(int)"),
self.calculixFinished)
QtCore.QObject.connect(self.Timer, QtCore.SIGNAL("timeout()"),
self.UpdateText)
self.update()
def __init__(self, object):
# the panel has a tree widget that contains categories
# for the subcomponents, such as additions, subtractions.
# the categories are shown only if they are not empty.
form_class, base_class = uic.loadUiType(
FreeCAD.getHomePath() + "Mod/Fem/MechanicalAnalysis.ui")
self.obj = object
self.formUi = form_class()
self.form = QtGui.QWidget()
self.formUi.setupUi(self.form)
self.params = FreeCAD.ParamGet(
"User parameter:BaseApp/Preferences/Mod/Machining_Distortion")
#Connect Signals and Slots
QtCore.QObject.connect(self.formUi.toolButton_chooseOutputDir,
QtCore.SIGNAL("clicked()"),
self.chooseOutputDir)
QtCore.QObject.connect(self.formUi.pushButton_generate,
QtCore.SIGNAL("clicked()"), self.run)
self.update()
#You should have received a copy of the GNU Lesser General Public
#License along with this library; if not, write to the Free Software
#Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
from os.path import dirname, join
bolts_path = dirname(__file__)
from BOLTS import USE_PYSIDE
import FreeCAD, FreeCADGui
if USE_PYSIDE:
from PySide import QtCore, QtGui
from FreeCADGui import PySideUic as uic
try:
Ui_BoltsWidget,QBoltsWidget = uic.loadUiType(join(bolts_path,'bolts_widget.ui'))
Ui_ValueWidget,QValueWidget = uic.loadUiType(join(bolts_path,'value_widget.ui'))
Ui_BoolWidget,QBoolWidget = uic.loadUiType(join(bolts_path,'bool_widget.ui'))
Ui_TableIndexWidget,QTableIndexWidget = uic.loadUiType(join(bolts_path,'tableindex_widget.ui'))
Ui_PropertyWidget,QPropertyWidget = uic.loadUiType(join(bolts_path,'property_widget.ui'))
except ImportError:
FreeCAD.Console.PrintError("uic import failed. Make sure that the pyside tools are installed")
raise
from PySide.QtCore import Slot
def unpack(x):
return x
else:
from PyQt4 import QtGui, QtCore
from bolts_widget import Ui_BoltsWidget
from PyQt4.QtGui import QDockWidget as QBoltsWidget
from value_widget import Ui_ValueWidget
from PySide import QtCore, QtGui
from FreeCADGui import PySideUic as uic
import FreeCAD, FreeCADGui
from ConfigParser import ConfigParser
from os.path import basename, dirname, join
from uuid import UUID
from hashlib import sha1
import json
import requests
from requests.auth import HTTPBasicAuth
try:
root_dir = dirname(__file__)
Ui_CadinetDialog,QCadinetDialog = uic.loadUiType(join(root_dir,'cadinet.ui'))
except ImportError:
FreeCAD.Console.PrintError("uic import failed. Make sure that the pyside tools are installed")
raise
LICENSES = {
"CC0 1.0" : "http://creativecommons.org/publicdomain/zero/1.0/",
"CC-BY 3.0" : "http://creativecommons.org/licenses/by/3.0/",
"CC-BY 4.0" : "http://creativecommons.org/licenses/by/4.0/",
"CC-BY-SA 4.0" : "http://creativecommons.org/licenses/by-sa/4.0/",
"CC-BY-ND 4.0" : "http://creativecommons.org/licenses/by-nd/4.0/",
"CC-BY-NC 4.0" : "http://creativecommons.org/licenses/by-nc/4.0/",
"CC-BY-NC-SA 4.0" : "http://creativecommons.org/licenses/by-nc-sa/4.0/",
"CC-BY-NC-ND 4.0" : "http://creativecommons.org/licenses/by-nc-nd/4.0/",
"MIT" : "http://opensource.org/licenses/MIT", #see https://fedoraproject.org/wiki/Licensing:MIT?rd=Licensing/MIT
"BSD 3-clause" : "http://opensource.org/licenses/BSD-3-Clause",
import FreeCADGui
from ..bolttools import freecad
from ..bolttools.blt import Collection
from ..bolttools.blt import ClassName
from ..bolttools.blt import ClassStandard
from .. import USE_PYSIDE
if USE_PYSIDE:
from PySide import QtCore
from PySide import QtGui
from FreeCADGui import PySideUic as uic
try:
bolts_path = dirname(__file__)
Ui_BoltsWidget, QBoltsWidget = uic.loadUiType(
join(bolts_path, 'bolts_widget.ui'))
Ui_ValueWidget, QValueWidget = uic.loadUiType(
join(bolts_path, 'value_widget.ui'))
Ui_BoolWidget, QBoolWidget = uic.loadUiType(
join(bolts_path, 'bool_widget.ui'))
Ui_TableIndexWidget, QTableIndexWidget = uic.loadUiType(
join(bolts_path, 'tableindex_widget.ui'))
Ui_PropertyWidget, QPropertyWidget = uic.loadUiType(
join(bolts_path, 'property_widget.ui'))
except ImportError:
FreeCAD.Console.PrintError(
"uic import failed. Make sure that the pyside tools are installed")
raise
from PySide.QtCore import Slot
def unpack(x):
from PySide import QtCore, QtGui
from FreeCADGui import PySideUic as uic
import FreeCAD, FreeCADGui
from ConfigParser import ConfigParser
from os.path import basename, dirname, join
from uuid import UUID
from hashlib import sha1
import json
import requests
from requests.auth import HTTPBasicAuth
try:
root_dir = dirname(__file__)
Ui_CadinetDialog, QCadinetDialog = uic.loadUiType(
join(root_dir, 'cadinet.ui'))
except ImportError:
FreeCAD.Console.PrintError(
"uic import failed. Make sure that the pyside tools are installed")
raise
LICENSES = {
"CC0 1.0": "http://creativecommons.org/publicdomain/zero/1.0/",
"CC-BY 3.0": "http://creativecommons.org/licenses/by/3.0/",
"CC-BY 4.0": "http://creativecommons.org/licenses/by/4.0/",
"CC-BY-SA 4.0": "http://creativecommons.org/licenses/by-sa/4.0/",
"CC-BY-ND 4.0": "http://creativecommons.org/licenses/by-nd/4.0/",
"CC-BY-NC 4.0": "http://creativecommons.org/licenses/by-nc/4.0/",
"CC-BY-NC-SA 4.0": "http://creativecommons.org/licenses/by-nc-sa/4.0/",
"CC-BY-NC-ND 4.0": "http://creativecommons.org/licenses/by-nc-nd/4.0/",
"MIT":