def uniformize1D(density, npts, factor):
fail = False
nzs = CPlot.getSelectedZones()
for nz in nzs:
nob = CTK.Nb[nz]+1
noz = CTK.Nz[nz]
z = CTK.t[2][nob][2][noz]
dims = Internal.getZoneDim(z)
try:
if dims[0] == 'Unstructured':
a = C.convertBAR2Struct(z); np = dims[1]
else: a = z; np = dims[1]*dims[2]*dims[3]
if density > 0: npts = D.getLength(a)*density
if factor > 0: npts = np*factor[0]
npts = int(max(npts, 2))
distrib = G.cart((0,0,0), (1./(npts-1.),1,1), (npts,1,1))
b = G.map(a, distrib)
CTK.replace(CTK.t, nob, noz, b)
except Exception as e:
fail = True
Panels.displayErrors([0,str(e)], header='Error: uniformize1D')
return fail
# - getDistantIndex (PyTree)- import Geom.PyTree as D import KCore.test as test import Converter.PyTree as C a = D.naca(12., 5001) l = D.getLength(a) l2 = D.getDistantIndex(a, 1, l / 10.) test.testO(l2, 1)
# - getLength (pyTree) - import Geom.PyTree as D a = D.line((0, 0, 0), (1, 0, 0)) print(D.getLength(a))
# - getLength (pyTree)- import Geom.PyTree as D a = D.line((0, 0, 0), (1, 0, 0)) print D.getLength(a)
def stretch1D(h):
fail = False
nzs = CPlot.getSelectedZones()
nz = nzs[0]
nob = CTK.Nb[nz]+1
noz = CTK.Nz[nz]
z = CTK.t[2][nob][2][noz]
dims = Internal.getZoneDim(z)
try:
if dims[0] == 'Unstructured': a = C.convertBAR2Struct(z)
else: a = z
except Exception as e:
#print 'Error: stretch1D: %s.'%str(e)
Panels.displayErrors([0,str(e)], header='Error: stretch1D')
return True # Fail
ind = CPlot.getActivePointIndex()
if ind == []: return True # Fail
ind = ind[0]
l = D.getLength(a)
a = D.getCurvilinearAbscissa(a)
zp = D.getCurvilinearAbscissa(z)
distrib = C.cpVars(a, 's', a, 'CoordinateX')
C._initVars(distrib, 'CoordinateY', 0.)
C._initVars(distrib, 'CoordinateZ', 0.)
distrib = C.rmVars(distrib, 's')
N = dims[1]
val = C.getValue(zp, 's', ind)
Xc = CPlot.getActivePoint()
valf = val
Pind = C.getValue(z, 'GridCoordinates', ind)
if ind < N-1: # cherche avec indp1
Pindp1 = C.getValue(z, 'GridCoordinates', ind+1)
v1 = Vector.sub(Pindp1, Pind)
v2 = Vector.sub(Xc, Pind)
if Vector.dot(v1,v2) >= 0:
val2 = C.getValue(zp, 's', ind+1)
alpha = Vector.norm(v2)/Vector.norm(v1)
valf = val+alpha*(val2-val)
if ind > 0 and val == valf: # cherche avec indm1
Pindm1 = C.getValue(z, 'GridCoordinates', ind-1)
v1 = Vector.sub(Pindm1, Pind)
v2 = Vector.sub(Xc, Pind)
if Vector.dot(v1,v2) >= 0:
val2 = C.getValue(zp, 's', ind-1)
alpha = Vector.norm(v2)/Vector.norm(v1)
valf = val+alpha*(val2-val)
if h < 0: # enforce point
distrib = G.enforcePoint(distrib, valf)
else: # enforce h
if val == 0: distrib = G.enforcePlusX(distrib, h/l, N/10, 1)
elif val == 1: distrib = G.enforceMoinsX(distrib, h/l, N/10, 1)
else: distrib = G.enforceX(distrib, valf, h/l, N/10, 1)
try:
a1 = G.map(a, distrib)
CTK.replace(CTK.t, nob, noz, a1)
except Exception as e:
fail = True
Panels.displayErrors([0,str(e)], header='Error: stretch1D')
return fail
def apply3D(density, npts, factor, ntype):
nzs = CPlot.getSelectedZones()
nz = nzs[0]
nob = CTK.Nb[nz]+1
noz = CTK.Nz[nz]
zone = CTK.t[2][nob][2][noz]
ret = getEdges3D(zone, 0.)
if ret is None: return True
(m, r, f, ue, uf, ind) = ret
out = []
# Applique la fonction sur m
i = m[0]
dims = Internal.getZoneDim(i)
np = dims[1]*dims[2]*dims[3]
if ntype == 0: # uniformize
if density > 0: npts = D.getLength(i)*density
if factor > 0: npts = np*factor[0]
npts = int(max(npts, 2))
distrib = G.cart((0,0,0), (1./(npts-1.),1,1), (npts,1,1))
b = G.map(i, distrib)
elif ntype == 1: # refine
if factor < 0: factor = (npts-1.)/(np-1)
else: npts = factor*(np-1)+1
b = G.refine(i, factor, 1)
elif ntype == 2: # stretch (factor=h)
h = factor
l = D.getLength(i)
a = D.getCurvilinearAbscissa(i)
distrib = C.cpVars(a, 's', a, 'CoordinateX')
C._initVars(distrib, 'CoordinateY', 0.)
C._initVars(distrib, 'CoordinateZ', 0.)
distrib = C.rmVars(distrib, 's')
N = dims[1]
val = C.getValue(a, 's', ind)
Xc = CPlot.getActivePoint()
valf = val
Pind = C.getValue(i, 'GridCoordinates', ind)
if ind < N-1: # cherche avec indp1
Pindp1 = C.getValue(i, 'GridCoordinates', ind+1)
v1 = Vector.sub(Pindp1, Pind)
v2 = Vector.sub(Xc, Pind)
if Vector.dot(v1,v2) >= 0:
val2 = C.getValue(a, 's', ind+1)
alpha = Vector.norm(v2)/Vector.norm(v1)
valf = val+alpha*(val2-val)
if ind > 0 and val == valf: # cherche avec indm1
Pindm1 = C.getValue(i, 'GridCoordinates', ind-1)
v1 = Vector.sub(Pindm1, Pind)
v2 = Vector.sub(Xc, Pind)
if Vector.dot(v1,v2) >= 0:
val2 = C.getValue(a, 's', ind-1)
alpha = Vector.norm(v2)/Vector.norm(v1)
valf = val+alpha*(val2-val)
if h < 0: distrib = G.enforcePoint(distrib, valf)
else:
if val == 0: distrib = G.enforcePlusX(distrib, h/l, N/10, 1)
elif val == 1: distrib = G.enforceMoinsX(distrib, h/l, N/10, 1)
else: distrib = G.enforceX(distrib, valf, h/l, N/10, 1)
b = G.map(i, distrib)
elif ntype == 3:
source = factor
b = G.map(i, source, 1)
elif ntype == 4: # smooth (factor=eps, npts=niter)
niter = npts
eps = factor
a = D.getCurvilinearAbscissa(i)
distrib = C.cpVars(a, 's', a, 'CoordinateX')
C._initVars(distrib, 'CoordinateY', 0.)
C._initVars(distrib, 'CoordinateZ', 0.)
distrib = C.rmVars(distrib, 's')
bornes = P.exteriorFaces(distrib)
distrib = T.smooth(distrib, eps=eps, niter=niter,
fixedConstraints=[bornes])
b = G.map(i, distrib, 1)
dimb = Internal.getZoneDim(b)
npts = dimb[1]
out.append(b)
# Raffine les edges si necessaires
if npts != np:
ret = getEdges3D(zone, 2.)
if ret is None: return True
(m, r, f, ue, uf, ind) = ret
for i in r:
dims = Internal.getZoneDim(i)
np = dims[1]*dims[2]*dims[3]
factor = (npts-1.)/(np-1) # npts de m
b = G.refine(i, factor, 1)
out.append(b)
# Garde les autres
out += ue
outf = []
# Rebuild les faces
for i in f:
# trouve les edges de la face
edges = P.exteriorFacesStructured(i)
match = []
for e in edges:
dime = Internal.getZoneDim(e)
np = dime[1]-1
P0 = C.getValue(e, Internal.__GridCoordinates__, 0)
P1 = C.getValue(e, Internal.__GridCoordinates__, np)
for ei in out: # retrouve les edges par leurs extremites
dimei = Internal.getZoneDim(ei)
npi = dimei[1]-1
Q0 = C.getValue(ei, Internal.__GridCoordinates__, 0)
Q1 = C.getValue(ei, Internal.__GridCoordinates__, npi)
t1 = Vector.norm2(Vector.sub(P0,Q0))
t2 = Vector.norm2(Vector.sub(P1,Q1))
if (t1 < 1.e-12 and t2 < 1.e-12): match.append(ei)
if len(match) == 4: # OK
fn = G.TFI(match)
# Projection du patch interieur
#dimsf = Internal.getZoneDim(fn)
#fns = T.subzone(fn, (2,2,1), (dimsf[1]-1,dimsf[2]-1,1))
#fns = T.projectOrtho(fns, [i])
#fn = T.patch(fn, fns, position=(2,2,1))
#fn = T.projectOrtho(fn, [i])
outf.append(fn)
else: return True
outf += uf
try:
b = G.TFI(outf)
CTK.replace(CTK.t, nob, noz, b)
return False
except Exception as e:
Panels.displayErrors([0,str(e)], header='Error: apply3D')
return True
def apply2D(density, npts, factor, ntype=0):
nzs = CPlot.getSelectedZones()
nz = nzs[0]
nob = CTK.Nb[nz]+1
noz = CTK.Nz[nz]
zone = CTK.t[2][nob][2][noz]
ret = getEdges2D(zone, 0.)
if ret is None: return True
(m, r, u, ind) = ret
out = []
# Applique la fonction sur m[0] (edge a modifier)
i = m[0]
dims = Internal.getZoneDim(i)
np = dims[1]*dims[2]*dims[3]
if ntype == 0: # uniformize
if density > 0: npts = D.getLength(i)*density
if factor > 0: npts = np*factor[0]
npts = int(max(npts, 2))
distrib = G.cart((0,0,0), (1./(npts-1.),1,1), (npts,1,1))
b = G.map(i, distrib)
elif ntype == 1: # refine
if factor < 0: factor = (npts-1.)/(np-1)
else: npts = factor*(np-1)+1
b = G.refine(i, factor, 1)
elif ntype == 2: # stretch (factor=h)
h = factor
l = D.getLength(i)
a = D.getCurvilinearAbscissa(i)
distrib = C.cpVars(a, 's', a, 'CoordinateX')
C._initVars(distrib, 'CoordinateY', 0.)
C._initVars(distrib, 'CoordinateZ', 0.)
distrib = C.rmVars(distrib, 's')
N = dims[1]
val = C.getValue(a, 's', ind)
Xc = CPlot.getActivePoint()
valf = val
Pind = C.getValue(i, 'GridCoordinates', ind)
if ind < N-1: # cherche avec indp1
Pindp1 = C.getValue(i, 'GridCoordinates', ind+1)
v1 = Vector.sub(Pindp1, Pind)
v2 = Vector.sub(Xc, Pind)
if Vector.dot(v1,v2) >= 0:
val2 = C.getValue(a, 's', ind+1)
alpha = Vector.norm(v2)/Vector.norm(v1)
valf = val+alpha*(val2-val)
if ind > 0 and val == valf: # cherche avec indm1
Pindm1 = C.getValue(i, 'GridCoordinates', ind-1)
v1 = Vector.sub(Pindm1, Pind)
v2 = Vector.sub(Xc, Pind)
if Vector.dot(v1,v2) >= 0:
val2 = C.getValue(a, 's', ind-1)
alpha = Vector.norm(v2)/Vector.norm(v1)
valf = val+alpha*(val2-val)
if h < 0: distrib = G.enforcePoint(distrib, valf)
else:
if val == 0: distrib = G.enforcePlusX(distrib, h/l, N/10, 1)
elif val == 1: distrib = G.enforceMoinsX(distrib, h/l, N/10, 1)
else: distrib = G.enforceX(distrib, valf, h/l, N/10, 1)
b = G.map(i, distrib)
elif ntype == 3: # copyDistrib (factor=source=edge pour l'instant)
source = factor
b = G.map(i, source, 1)
elif ntype == 4: # smooth (factor=eps, npts=niter)
niter = npts
eps = factor
a = D.getCurvilinearAbscissa(i)
distrib = C.cpVars(a, 's', a, 'CoordinateX')
C._initVars(distrib, 'CoordinateY', 0.)
C._initVars(distrib, 'CoordinateZ', 0.)
distrib = C.rmVars(distrib, 's')
bornes = P.exteriorFaces(distrib)
distrib = T.smooth(distrib, eps=eps, niter=niter,
fixedConstraints=[bornes])
b = G.map(i, distrib, 1)
dimb = Internal.getZoneDim(b)
npts = dimb[1]
out.append(b)
# Raffine les edges si necessaires
if npts != np:
ret = getEdges2D(zone, 2.)
if ret is None: return True
(m, r, u, ind) = ret
for i in r:
dims = Internal.getZoneDim(i)
np = dims[1]*dims[2]*dims[3]
factor = (npts-1.)/(np-1) # npts de m
b = G.refine(i, factor, 1)
out.append(b)
# Garde les autres
out += u
#tp = C.newPyTree(['Base'])
#tp[2][1][2] += out
#C.convertPyTree2File(tp, 'edges.cgns')
# Rebuild
try:
b = G.TFI(out)
# Projection du patch interieur
#dimsb = Internal.getZoneDim(b)
#bs = T.subzone(b, (2,2,1), (dimsb[1]-1,dimsb[2]-1,1))
#bs = T.projectOrtho(bs, [zone])
#b = T.patch(b, bs, position=(2,2,1))
#tp = C.newPyTree(['Base'])
#tp[2][1][2] += [b, zone]
#C.convertPyTree2File(tp, 'face.cgns')
b = T.projectOrtho(b, [zone])
CTK.replace(CTK.t, nob, noz, b)
return False
except Exception as e:
Panels.displayErrors([0,str(e)], header='Error: apply2D')
return True
# - getLength (pyTree)- import Geom.PyTree as D import Converter.PyTree as C import KCore.test as test # test getLength structure a = D.line((0, 0, 0), (1, 0, 0)) l = D.getLength(a) test.testO(l, l) # test getLength BAR a2 = C.convertArray2Tetra(a) l = D.getLength(a2) test.testO(l, 2) # test getLength par lots structure b = D.line((10, 0, 0), (1, 0, 0)) l = D.getLength([a, b]) test.testO(l, 3) # test getLength par lots non structure b2 = C.convertArray2Tetra(b) l = D.getLength([a2, b2]) test.testO(l, 4) # test getLength par lots mixte l = D.getLength([a, b2]) test.testO(l, 5)
