def run(self, window):
"""Run command."""
if window is None:
return
self.window = window
view = self.window.active_view()
self.view = view
if not self.init():
return
self.get_highlights()
# Show inspector panel
if self.inspector_enabled:
reset = False if self.total_bytes == 1 else True
self.window.run_command(
'hex_inspector',
{'first_byte': self.first_all, 'reset': reset, 'bytes_wide': self.bytes_wide}
)
# Highlight selected regions
if self.highlight_style == sublime.DRAW_EMPTY_AS_OVERWRITE:
self.selected_bytes = common.underline(self.selected_bytes)
view.add_regions(
"hex_view",
self.selected_bytes,
self.highlight_scope,
self.highlight_icon,
self.highlight_style
)
# Display selected byte addresses and total bytes selected
self.display_address()
self.display_total_bytes()
def run(self, window):
"""Run command."""
if window is None:
return
self.window = window
view = self.window.active_view()
self.view = view
if not self.init():
return
self.get_highlights()
# Show inspector panel
if self.inspector_enabled:
reset = False if self.total_bytes == 1 else True
self.window.run_command(
'hex_inspector', {
'first_byte': self.first_all,
'reset': reset,
'bytes_wide': self.bytes_wide
})
# Highlight selected regions
if self.highlight_style == sublime.DRAW_EMPTY_AS_OVERWRITE:
self.selected_bytes = common.underline(self.selected_bytes)
view.add_regions("hex_view", self.selected_bytes, self.highlight_scope,
self.highlight_icon, self.highlight_style)
# Display selected byte addresses and total bytes selected
self.display_address()
self.display_total_bytes()
def apply_edit(self, value):
"""Apply edits."""
edits = ""
self.view = self.window.active_view()
# Is this the same view as earlier?
if self.handshake != -1 and self.handshake == self.view.id():
total_chars = self.total_bytes * 2
selection = self.line["selection"].replace(" ", "")
# Transform string if provided
if re.match("^s\:", value) is not None:
edits = hexlify(
value[2:len(value)].encode("ascii")).decode("ascii")
else:
edits = value.replace(" ", "").lower()
# See if change occured and if changes are valid
if len(edits) != total_chars:
self.edit_panel(value, "Unexpected # of bytes!")
return
elif re.match("[\da-f]{" + str(total_chars) + "}", edits) is None:
self.edit_panel(value, "Invalid data!")
return
elif selection != edits:
# Get previous dirty markers before modifying buffer
regions = self.view.get_regions("hex_edit")
# Construct old and new data for diffs
edits = self.line["data1"] + edits + self.line["data2"]
original = self.line["data1"] + selection + self.line["data2"]
# Initialize
ascii_str = " :"
start = 0
ascii_start_pos = self.ascii_pos
hex_start_pos = self.line["range"].begin(
) + common.ADDRESS_OFFSET
end = len(edits)
count = 1
change_start = None
# Reconstruct line
l_buffer = self.line["address"]
while start < end:
byte_end = start + 2
value = edits[start:byte_end]
# Diff data and mark changed bytes
if value != original[start:byte_end]:
if change_start is None:
change_start = [hex_start_pos, ascii_start_pos]
# Check if group end
if count == self.group_size:
regions.append(
sublime.Region(change_start[0],
hex_start_pos + 2))
change_start[0] = None
else:
# Check if after group end
if change_start[0] is None:
change_start[0] = hex_start_pos
# Check if group end
if count == self.group_size:
regions.append(
sublime.Region(change_start[0],
hex_start_pos + 2))
change_start[0] = None
elif change_start is not None:
if self.view.score_selector(hex_start_pos - 1,
'raw.nibble.lower'):
if change_start[0] is not None:
regions.append(
sublime.Region(change_start[0],
hex_start_pos))
else:
if change_start[0] is not None:
regions.append(
sublime.Region(change_start[0],
hex_start_pos - 1))
regions.append(
sublime.Region(change_start[1], ascii_start_pos))
change_start = None
# Write bytes and add space and at group region end
l_buffer += value
if count == self.group_size:
l_buffer += " "
hex_start_pos += 1
count = 0
# Copy valid printible ascii chars over or substitute with "."
dec = unpack("=B", unhexlify(value))[0]
ascii_str += chr(dec) if dec in range(32, 127) else "."
start += 2
count += 1
hex_start_pos += 2
ascii_start_pos += 1
# Check for end of line case for highlight
if change_start is not None:
if change_start[0] is not None:
regions.append(
sublime.Region(change_start[0], hex_start_pos))
regions.append(
sublime.Region(change_start[1], ascii_start_pos))
change_start = None
# Append ascii chars to line accounting for missing bytes in line
delta = int(self.bytes_wide) - len(edits) / 2
group_space = int(delta / self.group_size) + (
1 if delta % self.group_size else 0)
l_buffer += " " * int(group_space + delta * 2) + ascii_str
# Apply buffer edit
self.view.sel().clear()
self.view.set_read_only(False)
HexEditGlobal.bfr = l_buffer
HexEditGlobal.region = self.line["range"]
self.view.run_command("hex_edit_apply")
HexEditGlobal.clear()
self.view.set_read_only(True)
self.view.sel().add(
sublime.Region(self.start_pos, self.end_pos))
# Underline if required
if self.highlight_style == sublime.DRAW_EMPTY_AS_OVERWRITE:
regions = common.underline(regions)
# Highlight changed bytes
self.view.add_regions("hex_edit", regions,
self.highlight_scope,
self.highlight_icon,
self.highlight_style)
# Update selection
self.window.run_command('hex_highlighter')
else:
error("Hex view is no longer in focus! Edit Failed.")
# Clean up
self.reset()
def apply_edit(self, value):
"""Apply edits."""
edits = ""
self.view = self.window.active_view()
# Is this the same view as earlier?
if self.handshake != -1 and self.handshake == self.view.id():
total_chars = self.total_bytes * 2
selection = self.line["selection"].replace(" ", "")
# Transform string if provided
if re.match("^s\:", value) is not None:
edits = hexlify(value[2:len(value)].encode("ascii")).decode("ascii")
else:
edits = value.replace(" ", "").lower()
# See if change occured and if changes are valid
if len(edits) != total_chars:
self.edit_panel(value, "Unexpected # of bytes!")
return
elif re.match("[\da-f]{" + str(total_chars) + "}", edits) is None:
self.edit_panel(value, "Invalid data!")
return
elif selection != edits:
# Get previous dirty markers before modifying buffer
regions = self.view.get_regions("hex_edit")
# Construct old and new data for diffs
edits = self.line["data1"] + edits + self.line["data2"]
original = self.line["data1"] + selection + self.line["data2"]
# Initialize
ascii_str = " :"
start = 0
ascii_start_pos = self.ascii_pos
hex_start_pos = self.line["range"].begin() + common.ADDRESS_OFFSET
end = len(edits)
count = 1
change_start = None
# Reconstruct line
l_buffer = self.line["address"]
while start < end:
byte_end = start + 2
value = edits[start:byte_end]
# Diff data and mark changed bytes
if value != original[start:byte_end]:
if change_start is None:
change_start = [hex_start_pos, ascii_start_pos]
# Check if group end
if count == self.group_size:
regions.append(sublime.Region(change_start[0], hex_start_pos + 2))
change_start[0] = None
else:
# Check if after group end
if change_start[0] is None:
change_start[0] = hex_start_pos
# Check if group end
if count == self.group_size:
regions.append(sublime.Region(change_start[0], hex_start_pos + 2))
change_start[0] = None
elif change_start is not None:
if self.view.score_selector(hex_start_pos - 1, 'raw.nibble.lower'):
if change_start[0] is not None:
regions.append(sublime.Region(change_start[0], hex_start_pos))
else:
if change_start[0] is not None:
regions.append(sublime.Region(change_start[0], hex_start_pos - 1))
regions.append(sublime.Region(change_start[1], ascii_start_pos))
change_start = None
# Write bytes and add space and at group region end
l_buffer += value
if count == self.group_size:
l_buffer += " "
hex_start_pos += 1
count = 0
# Copy valid printible ascii chars over or substitute with "."
dec = unpack("=B", unhexlify(value))[0]
ascii_str += chr(dec) if dec in range(32, 127) else "."
start += 2
count += 1
hex_start_pos += 2
ascii_start_pos += 1
# Check for end of line case for highlight
if change_start is not None:
if change_start[0] is not None:
regions.append(sublime.Region(change_start[0], hex_start_pos))
regions.append(sublime.Region(change_start[1], ascii_start_pos))
change_start = None
# Append ascii chars to line accounting for missing bytes in line
delta = int(self.bytes_wide) - len(edits) / 2
group_space = int(delta / self.group_size) + (1 if delta % self.group_size else 0)
l_buffer += " " * int(group_space + delta * 2) + ascii_str
# Apply buffer edit
self.view.sel().clear()
self.view.set_read_only(False)
HexEditGlobal.bfr = l_buffer
HexEditGlobal.region = self.line["range"]
self.view.run_command("hex_edit_apply")
HexEditGlobal.clear()
self.view.set_read_only(True)
self.view.sel().add(sublime.Region(self.start_pos, self.end_pos))
# Underline if required
if self.highlight_style == sublime.DRAW_EMPTY_AS_OVERWRITE:
regions = common.underline(regions)
# Highlight changed bytes
self.view.add_regions(
"hex_edit",
regions,
self.highlight_scope,
self.highlight_icon,
self.highlight_style
)
# Update selection
self.window.run_command('hex_highlighter')
else:
error("Hex view is no longer in focus! Edit Failed.")
# Clean up
self.reset()