from ArduinoGate import ArduinoGate
from Monaco import Monaco
import time
import sys
#Instantiate Classes
laser = Monaco(Port_id='com1', power=80, pulse_freq=1000)
gate = ArduinoGate(port='com4', baudrate=9600, timeout=5)
#Laser Set-up
laser.set_parameters(power=5, RRD=100)
bursts = input('No. Pulses: ')
laser.serial_write('BP=' + str(bursts))
#Begin test
startPower = 5
endPower = 100
Step = 2
laserPowers = list(range(startPower, endPower, Step))
laser.start_lasing()
for power in laserPowers:
laser.set_parameters(power=power)
#Confirmation
print('Power: ', power)
confirm = input('Fire Laser? (y/n)')
if confirm == 'y':
gate.quick_open(500)
from ArduinoGate import ArduinoGate
from Monaco import Monaco
import time
laser = Monaco(Port_id='com1', power=80, pulse_freq=1000)
gate = ArduinoGate(port='com4', baudrate=9600, timeout=5)
laser.set_parameters(RRD=1)
laser.activate_laser(1) #gated Mode
laser.start_lasing()
for i in range(5):
open_time = input('Delay: ')
gate.quick_open(open_time)
time.sleep((int(open_time) / 1000) *
1.2) #stops laser stopping before final gate closes
print('output: ', gate.serial_read())
laser.stop_lasing()
from ArduinoGate import ArduinoGate
from Monaco import Monaco
import numpy as np
import time
import sys
#set to 10kHz
laser = Monaco(Port_id = 'com1', power = 50.5, pulse_freq = 1000)
gate = ArduinoGate(port ='com4', baudrate = 9600, timeout = 5)
# #Laser Set-up
# laser.set_parameters(power = 5, RRD = 100)
# #set to 100 pulses (10ms)
# laser.serial_write('BP=100')
PRR = [100,
10,
100,
1000,
1000,
10,
100,
10,
100,
100,
100,
1000,
100,
1000,
1000,
1000,
from ArduinoGate import ArduinoGate
from Monaco import Monaco
import numpy as np
import time
import sys
#set to 10kHz
laser = Monaco(Port_id='com1', power=50.5, pulse_freq=1000)
gate = ArduinoGate(port='com4', baudrate=9600, timeout=5)
#Laser Set-up
laser.set_parameters(power=5, RRD=1)
#set to 40 pulses
laser.serial_write('BP=4000')
def solve_for_y(poly_coeffs, y):
#stackoverflow: https://stackoverflow.com/questions/16827053/solving-for-x-values-of-polynomial-with-known-y-in-scipy-numpy
pc = poly_coeffs.copy()
pc[-1] -= y
return np.roots(pc)
def Watt2RL(desired_power):
#desired power must be in range
polynom = [
-3.89619018e-18, 1.43681797e-15, -1.71273526e-13, 8.88299244e-13,
1.54934881e-09, -1.41594079e-07, 4.87160468e-06, -4.11977712e-05,
2.31567217e-04, 2.70908813e-03, -1.08571654e-02
]
roots = solve_for_y(polynom, desired_power)
from ArduinoGate import ArduinoGate
from Monaco import Monaco
import time
laser = Monaco(Port_id='com1', power=50.5, pulse_freq=1000)
gate = ArduinoGate(port='com4', baudrate=9600, timeout=5)
#laser.activate_laser(5)
laser.set_parameters(RRD=4)
#laser.activate_laser(4)
bursts = input('No. Pulses: ')
laser.serial_write('BP=' + str(bursts))
laser.status_report()
laser.start_lasing()
#time.sleep(5)
print('opening gate')
gate.quick_open(5000)
time.sleep(10)
gate.quick_open(1000)
time.sleep(5)
laser.stop_lasing()
from Monaco import Monaco
import time
#show available ports
print('Port list: ', Monaco.port_finder())
#input device port
port = input('input port: ')
laser = Monaco(Port_id = port, power = 10, pulse_freq = 10)
laser.stop_lasing()
laser.deactivate_laser()
from Monaco import Monaco
import time
port = 'com1'
laser = Monaco(Port_id = port, power = 10, pulse_freq = 1000)
RL_values = [5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100]
for RL in RL_values:
laser.status_report()
laser.set_parameters(power = RL)
print('POWER: ',laser.power)
laser.start_lasing()
time.sleep(10)
laser.stop_lasing()
#start up for laser
from Monaco import Monaco
import time
#show available ports
print('Port list: ', Monaco.port_finder())
#input device port
port = input('input port: ')
#Open port and check connection is secure
laser = Monaco(Port_id=port, power=10, pulse_freq=10)
laser.hello_laser()
laser.start_up()
#turn on diodes with continuous pulsing
laser.activate_laser(5)
from Monaco import Monaco
import time
#show available ports
print('Port list: ', Monaco.port_finder())
#input device port
port = input('input port: ')
#Open port and check connection is secure
laser = Monaco(Port_id = port, power = 10, pulse_freq = 10)
laser.serial_write('LOCKOUT=0')
print('unlocked laser port')
from FFXIV import FFXIV
from TicTacToe import TicTacToe
from Overwatch import Overwatch
from Chess import Chess
from Timer import Timer
from Cinemark import Cinemark
from SoundVoice import SoundVoice
import Token
if not discord.opus.is_loaded():
discord.opus.load_opus("libopus.so")
bot = commands.Bot(command_prefix='$', description='I am here to serve')
bot.add_cog(Stocks(bot))
bot.add_cog(Monaco(bot))
bot.add_cog(MagicCard(bot))
bot.add_cog(FFXIV(bot))
bot.add_cog(TicTacToe(bot))
bot.add_cog(Overwatch(bot))
bot.add_cog(Chess(bot))
bot.add_cog(Cinemark(bot))
bot.add_cog(Timer(bot))
#bot.add_cog(SoundVoice(bot))
@bot.event
async def on_ready():
print('Logged in as')
print(bot.user.name)
print(bot.user.id)
from Monaco import Monaco
import time
port = 'com1'
laser = Monaco(Port_id=port, power=10, pulse_freq=1000)
error = laser.serial_write('RL=52.713')
print(error)
print('done')
rl = laser.serial_write('?RL')
print('RL =', rl)
print('done')
# laser.start_lasing()
#
# time.sleep(5)
#
# laser.stop_lasing()