def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostIP=None,
i_hostUser=None, i_hostPasswd=None):
self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
i_ffdcDir, i_hostIP, i_hostUser, i_hostPasswd)
self.cv_HOST = OpTestHost(i_hostIP, i_hostUser, i_hostPasswd,i_bmcIP, i_ffdcDir)
self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostIP,
i_hostUser, i_hostPasswd)
self.util = OpTestUtil()
self.opTestHMIHandling = OpTestHMIHandling(i_bmcIP, i_bmcUser, i_bmcPasswd,
i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostIP,
i_hostUser, i_hostPasswd)
class OpTestIPMIReprovision():
## Initialize this object
# @param i_bmcIP The IP address of the BMC
# @param i_bmcUser The userid to log into the BMC with
# @param i_bmcPasswd The password of the userid to log into the BMC with
# @param i_bmcUserIpmi The userid to issue the BMC IPMI commands with
# @param i_bmcPasswdIpmi The password of BMC IPMI userid
# @param i_ffdcDir Optional param to indicate where to write FFDC
#
# "Only required for inband tests" else Default = None
# @param i_hostIP The IP address of the HOST
# @param i_hostUser The userid to log into the HOST
# @param i_hostPasswd The password of the userid to log into the HOST with
#
def __init__(self, i_bmcIP, i_bmcUser, i_bmcPasswd,
i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir=None, i_hostIP=None,
i_hostUser=None, i_hostPasswd=None):
self.cv_BMC = OpTestBMC(i_bmcIP, i_bmcUser, i_bmcPasswd, i_ffdcDir)
self.cv_IPMI = OpTestIPMI(i_bmcIP, i_bmcUserIpmi, i_bmcPasswdIpmi,
i_ffdcDir, i_hostIP, i_hostUser, i_hostPasswd)
self.cv_HOST = OpTestHost(i_hostIP, i_hostUser, i_hostPasswd,i_bmcIP, i_ffdcDir)
self.cv_SYSTEM = OpTestSystem(i_bmcIP, i_bmcUser, i_bmcPasswd,
i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostIP,
i_hostUser, i_hostPasswd)
self.util = OpTestUtil()
self.opTestHMIHandling = OpTestHMIHandling(i_bmcIP, i_bmcUser, i_bmcPasswd,
i_bmcUserIpmi, i_bmcPasswdIpmi, i_ffdcDir, i_hostIP,
i_hostUser, i_hostPasswd)
##
# @brief This function will cover following test steps
# Testcase: NVRAM Partition-IPMI Reprovision
# 1. Update NVRAM config data with test config data
# i.e "nvram --update-config test-name=test-value"
# 2. Issue an IPMI PNOR Reprovision request command, to reset NVRAM partition to default.
# 3. Wait for PNOR Reprovision progress to complete(00).
# 4. Do a Hard reboot(Power OFF/ON) to avoid nvram cache data.
# 5. Once system booted, check for NVRAM parition whether the test config data
# got erased or not.
#
# @return BMC_CONST.FW_SUCCESS or raise OpTestError
#
def test_nvram_ipmi_reprovision(self):
self.cv_SYSTEM.sys_bmc_power_on_validate_host()
self.cv_HOST.host_run_command("uname -a")
self.cv_HOST.host_run_command(BMC_CONST.NVRAM_PRINT_CFG)
print "IPMI_Reprovision: Updating the nvram partition with test cfg data"
self.cv_HOST.host_run_command(BMC_CONST.NVRAM_UPDATE_CONFIG_TEST_DATA)
self.cv_HOST.host_run_command(BMC_CONST.NVRAM_PRINT_CFG)
print "IPMI_Reprovision: issuing ipmi pnor reprovision request"
self.cv_SYSTEM.sys_issue_ipmi_pnor_reprovision_request()
print "IPMI_Reprovision: wait for reprovision to complete"
self.cv_SYSTEM.sys_wait_for_ipmi_pnor_reprovision_to_complete()
print "IPMI_Reprovision: gathering the opal message logs"
self.cv_HOST.host_gather_opal_msg_log()
print "IPMI_Reprovision: Performing a IPMI Power OFF Operation"
# Perform a IPMI Power OFF Operation(Immediate Shutdown)
self.cv_IPMI.ipmi_power_off()
if int(self.cv_SYSTEM.sys_wait_for_standby_state(BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)) == BMC_CONST.FW_SUCCESS:
print "IPMI_Reprovision: System is in standby/Soft-off state"
else:
l_msg = "IPMI_Reprovision: System failed to reach standby/Soft-off state after pnor reprovisioning"
raise OpTestError(l_msg)
print "IPMI_Reprovision: Performing a IPMI Power ON Operation"
# Perform a IPMI Power ON Operation
self.cv_IPMI.ipmi_power_on()
self.cv_SYSTEM.sys_check_host_status()
self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
l_res = self.cv_HOST.host_run_command(BMC_CONST.NVRAM_PRINT_CFG)
if l_res.__contains__(BMC_CONST.NVRAM_TEST_DATA):
l_msg = "NVRAM Partition - IPMI Reprovision not happening, nvram test config data still exists"
raise OpTestError(l_msg)
print "NVRAM Partition - IPMI Reprovision is done, cleared the nvram test config data"
self.cv_HOST.host_gather_opal_msg_log()
return BMC_CONST.FW_SUCCESS
##
# @brief This function will cover following test steps
# Testcase: GARD Partition-IPMI Reprovision
# 1. Inject core checkstop using existed function from OpTestHMIHandling.py
# 2. Do a Hard reboot(IPMI Power OFF/ON)
# 2. Issue an IPMI PNOR Reprovision request command, to reset GUARD partition to default.
# 3. Wait for IPMI PNOR Reprovision progress to complete(00).
# 4. Check for GUARD parition whether the existing gard records erased or not.
# 6. Reboot the system back to see system is booting fine or not.
#
# @return BMC_CONST.FW_SUCCESS or raise OpTestError
#
def test_gard_ipmi_reprovision(self):
self.cv_SYSTEM.sys_bmc_power_on_validate_host()
print "IPMI_Reprovision: Injecting system core checkstop to guard the phyisical cpu"
self.opTestHMIHandling.testHMIHandling(BMC_CONST.HMI_MALFUNCTION_ALERT)
print "IPMI_Reprovision: Performing a IPMI Power OFF Operation"
# Perform a IPMI Power OFF Operation(Immediate Shutdown)
self.cv_IPMI.ipmi_power_off()
if int(self.cv_SYSTEM.sys_wait_for_standby_state(BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)) == BMC_CONST.FW_SUCCESS:
print "IPMI_Reprovision: System is in standby/Soft-off state"
else:
l_msg = "IPMI_Reprovision: System failed to reach standby/Soft-off state"
raise OpTestError(l_msg)
print "IPMI_Reprovision: Performing a IPMI Power ON Operation"
# Perform a IPMI Power ON Operation
self.cv_IPMI.ipmi_power_on()
self.cv_SYSTEM.sys_check_host_status()
self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
print "IPMI_Reprovision: issuing ipmi pnor reprovision request"
self.cv_SYSTEM.sys_issue_ipmi_pnor_reprovision_request()
print "IPMI_Reprovision: wait for reprovision to complete"
self.cv_SYSTEM.sys_wait_for_ipmi_pnor_reprovision_to_complete()
print "IPMI_Reprovision: gathering the opal message logs"
self.cv_HOST.host_gather_opal_msg_log()
self.cv_HOST.host_get_OS_Level()
self.cv_HOST.host_clone_skiboot_source(BMC_CONST.CLONE_SKIBOOT_DIR)
# Compile the necessary tools xscom-utils and gard utility
self.cv_HOST.host_compile_gard_utility(BMC_CONST.CLONE_SKIBOOT_DIR)
l_con = self.cv_SYSTEM.sys_get_ipmi_console()
self.cv_IPMI.ipmi_host_login(l_con)
self.cv_IPMI.ipmi_host_set_unique_prompt(l_con)
self.cv_IPMI.run_host_cmd_on_ipmi_console("uname -a")
l_res = self.cv_SYSTEM.sys_list_gard_records(BMC_CONST.GARD_TOOL_DIR)
print l_res
if BMC_CONST.NO_GARD_RECORDS in l_res:
print "GUARD Partition - IPMI Reprovision is done, cleared HW gard records"
else:
l_msg = "IPMI: Reprovision not happening, gard records are not erased"
raise OpTestError(l_msg)
print "IPMI_Reprovision: Performing a IPMI Power OFF Operation"
# Perform a IPMI Power OFF Operation(Immediate Shutdown)
self.cv_IPMI.ipmi_power_off()
if int(self.cv_SYSTEM.sys_wait_for_standby_state(BMC_CONST.SYSTEM_STANDBY_STATE_DELAY)) == BMC_CONST.FW_SUCCESS:
print "IPMI_Reprovision: System is in standby/Soft-off state"
else:
l_msg = "IPMI_Reprovision: System failed to reach standby/Soft-off state"
raise OpTestError(l_msg)
print "IPMI_Reprovision: Performing a IPMI Power ON Operation"
# Perform a IPMI Power ON Operation
self.cv_IPMI.ipmi_power_on()
self.cv_SYSTEM.sys_check_host_status()
self.util.PingFunc(self.cv_HOST.ip, BMC_CONST.PING_RETRY_POWERCYCLE)
print "IPMI_Reprovision: gathering the opal message logs"
self.cv_HOST.host_gather_opal_msg_log()
return BMC_CONST.FW_SUCCESS
