def addInvHiggsProcess(
process,
iRunOnData=True,
iData="ParkedData",
iHLTFilter="MET",
iMCSignal=False,
iFile='/store/data/Run2012C/VBF1Parked/AOD/22Jan2013-v1/20000/40F56410-D979-E211-9843-002618943849.root',
iMaxEvent=100):
###--------------------------------------------------------------
### Load PAT, because it insists on defining the process for you
#from PhysicsTools.PatAlgos.patTemplate_cfg import *
###--------------------------------------------------------------
###--------------------------------------------------------------
### Input
process.maxEvents.input = iMaxEvent
process.source.fileNames = [iFile]
###--------------------------------------------------------------
###--------------------------------------------------------------
### GlobalTag
if iRunOnData == True:
process.GlobalTag.globaltag = "FT53_V21A_AN6::All"
else:
process.GlobalTag.globaltag = "START53_V27::All"
###--------------------------------------------------------------
###--------------------------------------------------------------
### Logger
process.load("FWCore.MessageService.MessageLogger_cfi")
process.load("FWCore.MessageLogger.MessageLogger_cfi")
process.MessageLogger.cerr.FwkReport = cms.untracked.PSet(
reportEvery=cms.untracked.int32(2000),
limit=cms.untracked.int32(10000000))
###--------------------------------------------------------------
###--------------------------------------------------------------
### L1 Trigger
process.load('L1Trigger.Skimmer.l1Filter_cfi')
process.l1Filter.algorithms = cms.vstring('L1_ETM40')
###--------------------------------------------------------------
###--------------------------------------------------------------
### HLT Trigger(s)
# If it's MC signal, no trigger will be applied
if iRunOnData == False and iMCSignal == True:
iHLTFilter = "NoTrig"
# Load hltHighLevel
process.load('HLTrigger.HLTfilters.hltHighLevel_cfi')
process.hltHighLevel.TriggerResultsTag = cms.InputTag(
"TriggerResults", "", "HLT")
process.hltHighLevel.throw = cms.bool(
False) # Tolerate if triggers not available
process.hltHighLevel.andOr = cms.bool(True) # True = OR, False = AND
if (iRunOnData == True and iHLTFilter.find("MET") == 0):
process.hltHighLevel.HLTPaths = cms.vstring(
#"HLT_DiPFJet40_PFMETnoMu65_MJJ600VBF_LeadingJets_v*",
#"HLT_DiPFJet40_PFMETnoMu65_MJJ800VBF_AllJets_v*"
"HLT_DiJet35_MJJ700_AllJets_DEta3p5_VBF_v*",
"HLT_DiJet30_MJJ700_AllJets_DEta3p5_VBF_v*")
elif (iHLTFilter.find("SingleMu") == 0):
process.hltHighLevel.HLTPaths = cms.vstring("HLT_IsoMu24_eta2p1_v*",
"HLT_Mu40_eta2p1_v*")
#elif (iHLTFilter.find("DoubleMu")==0):
# process.hltHighLevel.HLTPaths = cms.vstring("HLT_Mu17_Mu8_v*")
#elif (iHLTFilter.find("SingleElectron")==0):
# process.hltHighLevel.HLTPaths = cms.vstring("HLT_Ele27_WP80_v*")
#elif (iHLTFilter.find("DoubleElectron")==0):
# process.hltHighLevel.HLTPaths = cms.vstring("HLT_Ele17_CaloIdT_CaloIsoVL_TrkIdVL_TrkIsoVL_Ele8_CaloIdT_CaloIsoVL_TrkIdVL_TrkIsoVL_v*")
elif (iHLTFilter.find("NoTrig") == 0):
process.hltHighLevel.HLTPaths = cms.vstring("*")
else:
process.hltHighLevel.HLTPaths = cms.vstring(
#"HLT_DiPFJet40_PFMETnoMu65_MJJ600VBF_LeadingJets_v*",
#"HLT_DiPFJet40_PFMETnoMu65_MJJ800VBF_AllJets_v*"
"HLT_DiJet35_MJJ700_AllJets_DEta3p5_VBF_v*",
"HLT_DiJet30_MJJ700_AllJets_DEta3p5_VBF_v*")
### VBF filter for MC Background
process.vbfFilter = cms.EDFilter("HLTPFJetVBFFilter",
saveTags=cms.bool(True),
triggerType=cms.int32(85),
inputTag=cms.InputTag("ak5PFJets"),
leadingJetOnly=cms.bool(False),
minPtHigh=cms.double(25.0),
minPtLow=cms.double(25.0),
maxEta=cms.double(5.0),
etaOpposite=cms.bool(True),
minDeltaEta=cms.double(3.0),
minInvMass=cms.double(500.0))
###--------------------------------------------------------------
###--------------------------------------------------------------
print "-----------------------------------------------"
print "INVISIBLE HIGGS: Ntuple V12 for Parked Data"
print "-----------------------------------------------"
print "RunOnData = ", iRunOnData
if iRunOnData == True:
print "Dataset = ", iData
else:
if iMCSignal == True:
print "Dataset = MC Signal or DYNoTrig"
else:
print "Dataset = MC Background"
print "GlobalTag = ", process.GlobalTag.globaltag
print "Trigger = ", process.hltHighLevel.HLTPaths
print "Sample input file = ", iFile
print "Max events = ", iMaxEvent
print "-----------------------------------------------"
###--------------------------------------------------------------
###--------------------------------------------------------------
### Basic filters
# Track quality filter
process.noscraping = cms.EDFilter("FilterOutScraping",
applyfilter=cms.untracked.bool(True),
debugOn=cms.untracked.bool(False),
numtrack=cms.untracked.uint32(10),
thresh=cms.untracked.double(0.25))
# Require a good vertex
process.primaryVertexFilter = cms.EDFilter(
"VertexSelector",
src=cms.InputTag("offlinePrimaryVertices"),
cut=cms.string(
"!isFake && ndof > 4 && abs(z) <= 24 && position.Rho <= 2"),
filter=cms.bool(True))
###--------------------------------------------------------------
###--------------------------------------------------------------
### MET Filters
# The iso-based HBHE noise filter
process.load('CommonTools.RecoAlgos.HBHENoiseFilter_cfi')
# The CSC beam halo tight filter
process.load('RecoMET.METAnalyzers.CSCHaloFilter_cfi')
# The HCAL laser filter
process.load("RecoMET.METFilters.hcalLaserEventFilter_cfi")
#process.load("EventFilter.HcalRawToDigi.hcallasereventfilter2012_cff")
#process.hcallasereventfilter2012.eventFileName = cms.string('HCALLaser2012AllDatasets.txt.gz')
process.load(
"EventFilter.HcalRawToDigi.hcallaserFilterFromTriggerResult_cff")
# The ECAL dead cell trigger primitive filter
process.load('RecoMET.METFilters.EcalDeadCellTriggerPrimitiveFilter_cfi')
# The EE bad SuperCrystal filter
process.load('RecoMET.METFilters.eeBadScFilter_cfi')
# The ECAL laser correction filter
process.load('RecoMET.METFilters.ecalLaserCorrFilter_cfi')
# The Good vertices collection needed by the tracking failure filter
process.goodVertices = cms.EDFilter(
"VertexSelector",
filter=cms.bool(False),
src=cms.InputTag("offlinePrimaryVertices"),
cut=cms.string(
"!isFake && ndof > 4 && abs(z) <= 24 && position.rho < 2"))
# The tracking failure filter
process.load('RecoMET.METFilters.trackingFailureFilter_cfi')
# The tracking POG filters
process.load('RecoMET.METFilters.trackingPOGFilters_cff')
###--------------------------------------------------------------
###--------------------------------------------------------------
### customise PAT
process.load('JetMETCorrections.Configuration.DefaultJEC_cff')
from PhysicsTools.PatAlgos.tools.coreTools import removeMCMatching, runOnData
if iRunOnData == True:
removeMCMatching(process, ['All'])
runOnData(process)
# Add the PF MET
from PhysicsTools.PatAlgos.tools.metTools import addPfMET
addPfMET(process, 'PF')
# Switch to PF jets
from PhysicsTools.PatAlgos.tools.jetTools import switchJetCollection
if iRunOnData == True:
switchJetCollection(process,
cms.InputTag('ak5PFJets'),
doJTA=True,
doBTagging=False,
jetCorrLabel=('AK5PF', [
'L1FastJet', 'L2Relative', 'L3Absolute',
'L2L3Residual'
]),
doType1MET=True,
genJetCollection=cms.InputTag("ak5GenJets"),
doJetID=False,
jetIdLabel="ak5")
else:
switchJetCollection(
process,
cms.InputTag('ak5PFJets'),
doJTA=True,
doBTagging=False,
jetCorrLabel=('AK5PF', ['L1FastJet', 'L2Relative', 'L3Absolute']),
doType1MET=True,
genJetCollection=cms.InputTag("ak5GenJets"),
doJetID=False,
jetIdLabel="ak5")
from PhysicsTools.PatAlgos.tools.pfTools import usePFIso
usePFIso(process)
process.patMuons.isoDeposits = cms.PSet()
process.patMuons.isolationValues = cms.PSet()
process.patElectrons.isolationValues = cms.PSet(
pfChargedHadrons=cms.InputTag("elPFIsoValueCharged03PFIdPFIso"),
pfChargedAll=cms.InputTag("elPFIsoValueChargedAll03PFIdPFIso"),
pfPUChargedHadrons=cms.InputTag("elPFIsoValuePU03PFIdPFIso"),
pfNeutralHadrons=cms.InputTag("elPFIsoValueNeutral03PFIdPFIso"),
pfPhotons=cms.InputTag("elPFIsoValueGamma03PFIdPFIso"))
process.patElectrons.isolationValuesNoPFId = cms.PSet(
pfChargedHadrons=cms.InputTag("elPFIsoValueCharged03NoPFIdPFIso"),
pfChargedAll=cms.InputTag("elPFIsoValueChargedAll03NoPFIdPFIso"),
pfPUChargedHadrons=cms.InputTag("elPFIsoValuePU03NoPFIdPFIso"),
pfNeutralHadrons=cms.InputTag("elPFIsoValueNeutral03NoPFIdPFIso"),
pfPhotons=cms.InputTag("elPFIsoValueGamma03NoPFIdPFIso"))
process.patDefaultSequence.replace(
process.patElectrons, process.eleIsoSequence + process.patElectrons)
process.cleanPatTaus.preselection = cms.string(
'tauID("decayModeFinding") > 0.5 & tauID("byLooseCombinedIsolationDeltaBetaCorr") > 0.5'
)
###--------------------------------------------------------------
###--------------------------------------------------------------
### Object (pre) selection
# Jet selection
process.selectedPatJets.cut = cms.string("pt>10. && abs(eta)<5.")
# Remove overlaps ???
# process.cleanPatJets.finalCut = "!hasOverlaps('electrons') && !hasOverlaps('muons')"
# Apply loose PF jet ID
from PhysicsTools.SelectorUtils.pfJetIDSelector_cfi import pfJetIDSelector
process.goodPatJets = cms.EDFilter("PFJetIDSelectionFunctorFilter",
filterParams=pfJetIDSelector.clone(),
src=cms.InputTag("selectedPatJets"),
filter=cms.bool(True))
process.selectedPatMuons.cut = cms.string(
"isGlobalMuon && pt>10. && abs(eta)<2.5")
process.selectedPatElectrons.cut = cms.string("pt>10. && abs(eta)<2.5")
###--------------------------------------------------------------
###--------------------------------------------------------------
### Load the PU JetID sequence
if iRunOnData == True:
process.load("CMGTools.External.pujetidsequence_cff")
process.puJetMva.jets = cms.InputTag("goodPatJets")
process.puJetId.jets = cms.InputTag("goodPatJets")
else:
process.load("CMGTools.External.pujetidsequence_cff")
process.puJetMva.jets = cms.InputTag("goodPatJets")
process.puJetId.jets = cms.InputTag("goodPatJets")
process.puJetMvaSmeared = process.puJetMva.clone()
process.puJetIdSmeared = process.puJetId.clone()
process.puJetMvaResUp = process.puJetMva.clone()
process.puJetIdResUp = process.puJetId.clone()
process.puJetMvaResDown = process.puJetMva.clone()
process.puJetIdResDown = process.puJetId.clone()
process.puJetMvaEnUp = process.puJetMva.clone()
process.puJetIdEnUp = process.puJetId.clone()
process.puJetMvaEnDown = process.puJetMva.clone()
process.puJetIdEnDown = process.puJetId.clone()
process.puJetIdSmeared.jets = cms.InputTag("smearedGoodPatJets")
process.puJetMvaSmeared.jetids = cms.InputTag("puJetIdSmeared")
process.puJetMvaSmeared.jets = cms.InputTag("smearedGoodPatJets")
process.puJetIdResUp.jets = cms.InputTag("smearedGoodPatJetsResUp")
process.puJetMvaResUp.jetids = cms.InputTag("puJetIdResUp")
process.puJetMvaResUp.jets = cms.InputTag("smearedGoodPatJetsResUp")
process.puJetIdResDown.jets = cms.InputTag("smearedGoodPatJetsResDown")
process.puJetMvaResDown.jetids = cms.InputTag("puJetIdResDown")
process.puJetMvaResDown.jets = cms.InputTag(
"smearedGoodPatJetsResDown")
process.puJetIdEnUp.jets = cms.InputTag(
"shiftedGoodPatJetsEnUpForCorrMEt")
process.puJetMvaEnUp.jetids = cms.InputTag("puJetIdEnUp")
process.puJetMvaEnUp.jets = cms.InputTag(
"shiftedGoodPatJetsEnUpForCorrMEt")
process.puJetIdEnDown.jets = cms.InputTag(
"shiftedGoodPatJetsEnDownForCorrMEt")
process.puJetMvaEnDown.jetids = cms.InputTag("puJetIdEnDown")
process.puJetMvaEnDown.jets = cms.InputTag(
"shiftedGoodPatJetsEnDownForCorrMEt")
###--------------------------------------------------------------
###--------------------------------------------------------------
### MET
# Apply type 0 MET corrections based on PFCandidate
process.load("JetMETCorrections.Type1MET.pfMETCorrectionType0_cfi")
process.pfType1CorrectedMet.applyType0Corrections = cms.bool(False)
process.pfType1CorrectedMet.srcType1Corrections = cms.VInputTag(
cms.InputTag('pfMETcorrType0'), cms.InputTag('pfJetMETcorr', 'type1'))
# Get loose ID/Iso muons and veto ID electrons
process.load("InvisibleHiggs.Ntuple.PhysicsObjectCandidates_cff")
# Get PFMET from runMEtUncertainties
from PhysicsTools.PatUtils.tools.metUncertaintyTools import runMEtUncertainties
process.load("JetMETCorrections.Type1MET.pfMETsysShiftCorrections_cfi")
if iRunOnData == True:
runMEtUncertainties(
process,
electronCollection=cms.InputTag('selectVetoElectrons'),
photonCollection='',
muonCollection='selectLooseMuons',
tauCollection='',
jetCollection=cms.InputTag('goodPatJets'),
jetCorrLabel='L2L3Residual',
doSmearJets=False,
makeType1corrPFMEt=True,
makeType1p2corrPFMEt=False,
makePFMEtByMVA=False,
makeNoPileUpPFMEt=False,
doApplyType0corr=True,
sysShiftCorrParameter=process.
pfMEtSysShiftCorrParameters_2012runAvsNvtx_data,
doApplySysShiftCorr=False,
addToPatDefaultSequence=False,
)
process.patPFJetMETtype1p2Corr.jetCorrLabel = cms.string(
'L2L3Residual')
process.patPFJetMETtype2Corr.jetCorrLabel = cms.string('L2L3Residual')
else:
runMEtUncertainties(
process,
electronCollection=cms.InputTag('selectVetoElectrons'),
photonCollection='',
muonCollection='selectLooseMuons',
tauCollection='',
jetCollection=cms.InputTag('goodPatJets'),
jetCorrLabel='L3Absolute',
doSmearJets=True,
makeType1corrPFMEt=True,
makeType1p2corrPFMEt=False,
makePFMEtByMVA=False,
makeNoPileUpPFMEt=False,
doApplyType0corr=True,
sysShiftCorrParameter=process.
pfMEtSysShiftCorrParameters_2012runAvsNvtx_mc,
doApplySysShiftCorr=False,
addToPatDefaultSequence=False,
)
# Fix Type0 correction module
#process.patPFMETtype0Corr.correction.par3 = cms.double(0.909209)
#process.patPFMETtype0Corr.correction.par2 = cms.double(0.0303531)
#process.patPFMETtype0Corr.correction.par1 = cms.double(-0.703151)
#process.patPFMETtype0Corr.correction.par0 = cms.double(0.0)
# Need this line for CMSSW_5_3_11
process.producePatPFMETCorrections.replace(
process.patPFJetMETtype2Corr, process.patPFJetMETtype2Corr +
process.type0PFMEtCorrectionPFCandToVertexAssociation +
process.patPFMETtype0Corr)
#process.producePatPFMETCorrections.replace(process.patPFJetMETtype2Corr,process.patPFJetMETtype2Corr + process.patPFMETtype0Corr)
###--------------------------------------------------------------
# PAT/ntuples one step
# Z and W candidates
process.load('InvisibleHiggs/Ntuple/WCandidates_cff')
process.load('InvisibleHiggs/Ntuple/ZCandidates_cff')
# Ntuple producer
process.load('InvisibleHiggs/Ntuple/invHiggsInfo_cfi')
if iRunOnData == False:
# Jet/MET uncertainty
process.invHiggsInfo.jetTag = cms.untracked.InputTag(
"smearedGoodPatJets")
process.invHiggsInfo.metTag = cms.untracked.InputTag(
"patType1CorrectedPFMet")
process.invHiggsInfo.puJetMvaTag = cms.untracked.InputTag(
"puJetMvaSmeared", "full53xDiscriminant")
process.invHiggsInfo.puJetIdTag = cms.untracked.InputTag(
"puJetMvaSmeared", "full53xId")
# PU re-weighting
process.invHiggsInfo.puMCFile = cms.untracked.string("PUHistS10.root")
process.invHiggsInfo.puDataFile = cms.untracked.string(
"PUHistRun2012All_forParked.root")
process.invHiggsInfo.puMCHist = cms.untracked.string("pileup")
process.invHiggsInfo.puDataHist = cms.untracked.string("pileup")
process.invHiggsInfo.mcPYTHIA = cms.untracked.bool(True)
process.invHiggsInfo.trigCorrFile = cms.untracked.string(
"DataMCWeight_53X_v1.root")
# TTree output file
process.load("CommonTools.UtilAlgos.TFileService_cfi")
process.TFileService.fileName = cms.string('invHiggsInfo.root')
###--------------------------------------------------------------
###--------------------------------------------------------------
### Tau
# removeSpecificPATObjects( process, ['Taus'] )
# process.patDefaultSequence.remove( process.patTaus )
process.load("RecoTauTag.Configuration.RecoPFTauTag_cff")
###--------------------------------------------------------------
###--------------------------------------------------------------
### Trigger matching
# from PhysicsTools.PatAlgos.tools.trigTools import *
# process.metTriggerMatch = cms.EDProducer(
# "PATTriggerMatcherDRLessByR" # match by DeltaR only, best match by DeltaR
# , src = cms.InputTag( 'patMETs' )
# , matched = cms.InputTag( 'patTrigger' ) # default producer label as defined in PhysicsTools/PatAlgos/python/triggerLayer1/triggerProducer_cfi.py
# , matchedCuts = cms.string( 'path( "HLT_MET100_v*" )' )
# , maxDPtRel = cms.double( 0.5 )
# , maxDeltaR = cms.double( 0.5 )
# , resolveAmbiguities = cms.bool( True ) # only one match per trigger object
# , resolveByMatchQuality = cms.bool( True ) # take best match found per reco object: by DeltaR here (s. above)
# )
# process.jetTriggerMatch = cms.EDProducer(
# "PATTriggerMatcherDRLessByR" # match by DeltaR only, best match by DeltaR
# , src = cms.InputTag( 'patJets' )
# , matched = cms.InputTag( 'patTrigger' ) # default producer label as defined in PhysicsTools/PatAlgos/python/triggerLayer1/triggerProducer_cfi.py
# , matchedCuts = cms.string( 'path( "HLT_Jet30_v*" )' )
# , maxDPtRel = cms.double( 0.5 )
# , maxDeltaR = cms.double( 0.5 )
# , resolveAmbiguities = cms.bool( True ) # only one match per trigger object
# , resolveByMatchQuality = cms.bool( True ) # take best match found per reco object: by DeltaR here (s. above)
# )
# switchOnTriggerMatchEmbedding( process, [ 'metTriggerMatch', 'jetTriggerMatch' ] )
###--------------------------------------------------------------
###--------------------------------------------------------------
### Paths
process.p0 = cms.Path(process.HBHENoiseFilter)
process.p1 = cms.Path(process.CSCTightHaloFilter)
process.p2 = cms.Path(process.hcalLaserEventFilter)
process.p3 = cms.Path(process.EcalDeadCellTriggerPrimitiveFilter)
process.p4 = cms.Path(process.eeBadScFilter)
process.p5 = cms.Path(process.ecalLaserCorrFilter)
process.p6 = cms.Path(process.goodVertices * process.trackingFailureFilter)
process.p7 = cms.Path(process.trkPOGFilters)
if iRunOnData == True:
#process.p8 = cms.Path( process.hcallLaserEvent2012Filter )
process.p8 = cms.Path(process.hcalfilter)
else:
process.p8 = cms.Path(process.primaryVertexFilter)
if iRunOnData == True:
process.p = cms.Path(
# Trigger filter
process.l1Filter * process.hltHighLevel *
# Basic filters
process.noscraping * process.primaryVertexFilter *
# MET filters (Move to be flagged)
# MET Correction
process.type0PFMEtCorrection *
# Tau
process.recoTauClassicHPSSequence *
# Generate PAT
process.pfParticleSelectionSequence * process.patDefaultSequence *
process.goodPatJets * process.PhysicsObjectSequence *
process.metUncertaintySequence * process.puJetIdSqeuence *
process.WSequence * process.ZSequence * process.invHiggsInfo)
elif (iMCSignal == True):
process.p = cms.Path(
# Trigger filter
#process.hltHighLevel *
# Basic filters
process.noscraping * process.primaryVertexFilter *
# MET filters (Move to be flags)
# MET Correction
process.type0PFMEtCorrection *
# Tau
process.recoTauClassicHPSSequence *
# Generate PAT
process.pfParticleSelectionSequence * process.patDefaultSequence *
process.goodPatJets * process.PhysicsObjectSequence *
process.metUncertaintySequence * process.puJetIdSqeuence *
process.puJetIdSmeared * process.puJetMvaSmeared *
process.puJetIdResUp * process.puJetMvaResUp *
process.puJetIdResDown * process.puJetMvaResDown *
process.puJetIdEnUp * process.puJetMvaEnUp *
process.puJetIdEnDown * process.puJetMvaEnDown *
process.WSequence * process.ZSequence * process.invHiggsInfo)
else:
process.p = cms.Path(
# Trigger filter
#process.hltHighLevel *
process.vbfFilter *
# Basic filters
process.noscraping * process.primaryVertexFilter *
# MET filters (Move to be flags)
# MET Correction
process.type0PFMEtCorrection *
# Tau
process.recoTauClassicHPSSequence *
# Generate PAT
process.pfParticleSelectionSequence * process.patDefaultSequence *
process.goodPatJets * process.PhysicsObjectSequence *
process.metUncertaintySequence * process.puJetIdSqeuence *
process.puJetIdSmeared * process.puJetMvaSmeared *
process.puJetIdResUp * process.puJetMvaResUp *
process.puJetIdResDown * process.puJetMvaResDown *
process.puJetIdEnUp * process.puJetMvaEnUp *
process.puJetIdEnDown * process.puJetMvaEnDown *
process.WSequence * process.ZSequence * process.invHiggsInfo)
###--------------------------------------------------------------
###--------------------------------------------------------------
### Output
process.out.outputCommands += [
# trigger results
'keep edmTriggerResults_*_*_*',
'keep *_hltTriggerSummaryAOD_*_*'
# L1
,
'keep *_l1extraParticles_MET_RECO',
'keep *_l1extraParticles_MHT_RECO'
# good jets
,
'keep *_goodPatJets_*_*'
# PU jet ID
,
'keep *_puJetId*_*_*',
'keep *_puJetMva*_*_*'
# vertices
,
'keep *_offlineBeamSpot_*_*',
'keep *_offlinePrimaryVertices*_*_*',
'keep *_goodOfflinePrimaryVertices*_*_*',
'keep double_*_rho_*'
]
if iRunOnData == False:
process.out.outputCommands += [
'keep GenEventInfoProduct_*_*_*', 'keep recoGenParticles_*_*_*',
'keep GenMETs_*_*_*', 'keep *_addPileupInfo_*_*',
'keep LHEEventProduct_*_*_*'
]
process.out.fileName = 'patTuple.root'
del (process.out)
del (process.outpath)
#-- SusyPat Specifics ---------------------------------
if not is7X: # CMSSW 53X
if useSusyPat:
# Create default susyPattuple
from PhysicsTools.Configuration.SUSY_pattuple_cff import addDefaultSUSYPAT
addDefaultSUSYPAT(process,options.isMC,options.hltName,options.jetMetCorrections,options.mcVersion,options.jetTypes,options.doValidation,options.doExtensiveMatching,options.doSusyTopProjection)
# Embed matched trigger objects inside pat objects (used by TagAndProbe)
from PhysicsTools.PatAlgos.tools.trigTools import switchOnTriggerMatchEmbedding
switchOnTriggerMatchEmbedding( process, triggerMatchers = [ 'eleTriggerMatcher', 'muonTriggerMatcher' ], hltProcess = options.hltName, sequence = "susyPatDefaultSequence")
else: # or use patDefaultSequence
# Use pf Isolation
# https://twiki.cern.ch/twiki/bin/viewauth/CMS/EgammaPFBasedIsolation#PAT_configuration
# Needed also for Rho corrected pfIsolation for Electrons
from PhysicsTools.PatAlgos.tools.pfTools import usePFIso
usePFIso( process )
# Add Jet Collections
from PhysicsTools.Configuration.SUSY_pattuple_cff import addSUSYJetCollection
for jetName in options.jetTypes:
addSUSYJetCollection(process,options.jetMetCorrections,jetName,options.mcVersion)
else: # SusyPat is not available for 7X yet
# pf Isolation is in CMSSW7X by default, but the producers were renamed
# eg. elPFIsoValueCharged03PFIdPFIso -> elPFIsoValueCharged03PFId (no PFIso at the end)
#-- Remove MC dependencies ----------------------------
if not options.isMC:
from PhysicsTools.PatAlgos.tools.coreTools import *
runOnData(process)
def createProcess(runOnMC, runCHS, correctMETWithT1, processCaloJets, processCA8Jets, globalTag):
## import skeleton process
from PhysicsTools.PatAlgos.patTemplate_cfg import process
# load the PAT config
process.load("PhysicsTools.PatAlgos.patSequences_cff")
process.load("JetMETCorrections.Configuration.JetCorrectionProducers_cff")
# Do some CHS stuff
process.ak5PFchsL1Fastjet = process.ak5PFL1Fastjet.clone(algorithm = 'AK5PFchs')
process.ak5PFchsL2Relative = process.ak5PFL2Relative.clone(algorithm = 'AK5PFchs')
process.ak5PFchsL3Absolute = process.ak5PFL3Absolute.clone(algorithm = 'AK5PFchs')
process.ak5PFchsResidual = process.ak5PFResidual.clone(algorithm = 'AK5PFchs')
process.ak5PFchsL1FastL2L3 = cms.ESProducer(
'JetCorrectionESChain',
correctors = cms.vstring('ak5PFchsL1Fastjet', 'ak5PFchsL2Relative','ak5PFchsL3Absolute')
)
from PhysicsTools.SelectorUtils.pvSelector_cfi import pvSelector
## The good primary vertex filter ____________________________________________||
## This filter throw events with no primary vertex
process.primaryVertexFilter = cms.EDFilter(
"VertexSelector",
src = cms.InputTag("offlinePrimaryVertices"),
cut = cms.string("!isFake && ndof > 4 && abs(z) <= 24 && position.Rho <= 2"),
filter = cms.bool(True)
)
process.goodOfflinePrimaryVertices = cms.EDFilter("PrimaryVertexObjectFilter",
filterParams = pvSelector.clone( minNdof = cms.double(4.0), maxZ = cms.double(24.0) ),
src = cms.InputTag('offlinePrimaryVertices')
)
# Configure PAT to use PF2PAT instead of AOD sources
# this function will modify the PAT sequences.
from PhysicsTools.PatAlgos.tools.coreTools import removeSpecificPATObjects, removeMCMatching
from PhysicsTools.PatAlgos.tools.pfTools import usePF2PAT, adaptPFIsoElectrons, adaptPVs, usePFIso
#from PhysicsTools.PatAlgos.tools.metTools import *
def usePF2PATForAnalysis(jetAlgo, postfix, useTypeIMET, usePFNoPU):
# Jet corrections
# No L2L3 Residual on purpose
if usePFNoPU:
jetCorrections = ("%sPFchs" % algo, ['L1FastJet', 'L2Relative', 'L3Absolute'])
postfix += "chs"
else:
jetCorrections = ("%sPF" % algo, ['L1FastJet', 'L2Relative', 'L3Absolute'])
#if not runOnMC:
# jetCorrections[1].append('L2L3Residual')
p = postfix
usePF2PAT(process, runPF2PAT=True, jetAlgo=jetAlgo, runOnMC=runOnMC, postfix=p, jetCorrections=jetCorrections, typeIMetCorrections = useTypeIMET)
getattr(process, "pfPileUp" + p).Enable = True
getattr(process, "pfPileUp" + p).Vertices = 'goodOfflinePrimaryVertices'
getattr(process, "pfPileUp" + p).checkClosestZVertex = cms.bool(False)
getattr(process, "pfJets" + p).doAreaFastjet = cms.bool(True)
getattr(process, "pfJets" + p).doRhoFastjet = False
getattr(process, 'patJetCorrFactors' + p).rho = cms.InputTag("kt6PFJets", "rho") # Do not use kt6PFJetsPFlowAK5, it's not ok for L1FastJet.
# top projections in PF2PAT:
getattr(process,"pfNoPileUp" + p).enable = cms.bool(usePFNoPU)
getattr(process,"pfNoMuon" + p).enable = True
getattr(process,"pfNoElectron" + p).enable = True
getattr(process,"pfNoTau" + p).enable = True
getattr(process,"pfNoJet" + p).enable = True
getattr(process,"patElectrons" + p).embedTrack = True
getattr(process,"patMuons" + p).embedTrack = True
# enable delta beta correction for muon selection in PF2PAT?
getattr(process,"pfIsolatedMuons" + p).doDeltaBetaCorrection = True
getattr(process, "patJets" + p).embedPFCandidates = False
# Keep only jets with pt > 2 Gev
getattr(process, "selectedPatJets" + p).cut = "pt > 2";
# Use a cone of 0.3 for photon isolation
#adaptPFIsoPhotons(process, applyPostfix(process, "patPhotons", postfix), postfix, "03")
# 2012 Photon ID
# Electron conversion
setattr(process, "patConversions" + p, cms.EDProducer("PATConversionProducer",
# input collection
electronSource = cms.InputTag("selectedPatElectrons" + p)
))
# Switch electron isolation to dR = 0.3, for PF2PAT
getattr(process, "pfIsolatedElectrons" + p).isolationValueMapsCharged = cms.VInputTag(cms.InputTag("elPFIsoValueCharged03PFId" + p))
getattr(process, "pfIsolatedElectrons" + p).deltaBetaIsolationValueMap = cms.InputTag("elPFIsoValuePU03PFId" + p)
getattr(process, "pfIsolatedElectrons" + p).isolationValueMapsNeutral = cms.VInputTag(cms.InputTag("elPFIsoValueNeutral03PFId" + p), cms.InputTag("elPFIsoValueGamma03PFId" + p))
getattr(process, "pfElectrons" + p).isolationValueMapsCharged = cms.VInputTag(cms.InputTag("elPFIsoValueCharged03PFId" + p))
getattr(process, "pfElectrons" + p).deltaBetaIsolationValueMap = cms.InputTag("elPFIsoValuePU03PFId" + p)
getattr(process, "pfElectrons" + p).isolationValueMapsNeutral = cms.VInputTag(cms.InputTag( "elPFIsoValueNeutral03PFId" + p), cms.InputTag("elPFIsoValueGamma03PFId" + p))
# ... And for PAT
adaptPFIsoElectrons(process, getattr(process, "pfElectrons" + p), p, "03")
if runOnMC:
cloneProcessingSnippet(process, getattr(process, "makePatMuons" + p), "Loose" + p, p)
getattr(process, "muonMatchLoose" + p).src = cms.InputTag("pfMuons" + p)
getattr(process, "patMuonsLoose" + p).pfMuonSource = cms.InputTag("pfMuons" + p)
getattr(process, "patDefaultSequence" + p).replace(getattr(process, "makePatMuons" + p), getattr(process, "makePatMuons" + p) + getattr(process, "makePatMuonsLoose" + p))
else:
setattr(process, "patMuonsLoose" + p, getattr(process, "patMuons" + p).clone(
pfMuonSource = cms.InputTag("pfMuons" + p)
)
)
setattr(process, "selectedPatMuonsLoose" + p, getattr(process, "selectedPatMuons" + p).clone(
src = cms.InputTag("patMuonsLoose" + p)
)
)
sequence = getattr(process, "patDefaultSequence" + p)
if not runOnMC:
sequence += getattr(process, "patMuonsLoose" + p)
sequence += (getattr(process, "selectedPatMuonsLoose" + p))
setattr(process, "patElectronsLoose" + p, getattr(process, "patElectrons" + p).clone(
pfElectronSource = cms.InputTag("pfElectrons" + p)
)
)
setattr(process, "selectedPatElectronsLoose" + p, getattr(process, "selectedPatElectrons" + p).clone(
src = cms.InputTag("patElectronsLoose" + p)
)
)
adaptPFIsoElectrons(process, getattr(process, "patElectronsLoose" + p), postfix, "03")
sequence = getattr(process, "patDefaultSequence" + p)
sequence += (getattr(process, "patElectronsLoose" + p) * getattr(process, "selectedPatElectronsLoose" + p))
#giulia turn off qg tagger
## Setup quark gluon tagger
#process.load('QuarkGluonTagger.EightTeV.QGTagger_RecoJets_cff')
#cloneProcessingSnippet(process, process.QuarkGluonTagger, p)
#getattr(process, "QGTagger" + p).srcJets = cms.InputTag("selectedPatJets" + p)
#getattr(process, "QGTagger" + p).isPatJet = cms.untracked.bool(True)
#getattr(process, "QGTagger" + p).useCHS = cms.untracked.bool(usePFNoPU)
## Remove the processing of primary vertices, as it's already what we do here
#getattr(process, 'QGTagger' + p).srcPV = cms.InputTag('goodOfflinePrimaryVertices')
#getattr(process, 'QuarkGluonTagger' + p).remove(getattr(process, 'goodOfflinePrimaryVerticesQG' + p))
if not runOnMC:
if 'L2L3Residual' in jetCorrections:
getattr(process, 'patPFJetMETtype1p2Corr' + p).jetCorrLabel = 'L2L3Residual'
getattr(process, 'patPFMet' + p).addGenMET = cms.bool(False)
names = ["Taus"]
#if jetAlgo != "AK5":
#names += ["Electrons", "Muons"]
if len(names) > 0:
removeSpecificPATObjects(process, names = names, outputModules = ['out'], postfix = p)
adaptPVs(process, pvCollection = cms.InputTag("goodOfflinePrimaryVertices"), postfix = p)
getattr(process, "patDefaultSequence" + p).replace(getattr(process, "selectedPatElectrons" + p), getattr(process, "selectedPatElectrons" + p) + getattr(process, "patConversions" + p))
#getattr(process, "patDefaultSequence" + p).replace(getattr(process, "selectedPatJets" + p), getattr(process, "selectedPatJets" + p) + getattr(process, "QuarkGluonTagger" + p))
return getattr(process, "patPF2PATSequence" + p)
if correctMETWithT1:
process.load("PhysicsTools.PatUtils.patPFMETCorrections_cff")
from PhysicsTools.PatAlgos.tools.helpers import cloneProcessingSnippet
print "##########################"
print "PF jets with PF2PAT"
print "Using Type I met" if correctMETWithT1 else "NOT using Type I met"
print "##########################"
#runCHS = False
postfixes = {'PFlowAK5': 'AK5'}
#postfixes = {'PFlowAK5': 'AK5', 'PFlowAK7': 'AK7', 'PFlowCA8': 'CA8'}
#postfixes = {'PFlowCA8': 'CA8'}
##giulia turn off qg tagger
## Setup quark gluon tagger
#process.load('QuarkGluonTagger.EightTeV.QGTagger_RecoJets_cff')
process.sequence_chs = cms.Sequence()
process.sequence_nochs = cms.Sequence()
for p, algo in postfixes.items():
process.sequence_nochs += usePF2PATForAnalysis(jetAlgo=algo, postfix=p, usePFNoPU=False, useTypeIMET=correctMETWithT1)
if runCHS:
process.sequence_chs += usePF2PATForAnalysis(jetAlgo=algo, postfix=p, usePFNoPU=True, useTypeIMET=correctMETWithT1)
# setattr(process, 'QGTagger' + p, process.QGTagger.clone())
# getattr(process, "QGTagger" + p).srcJets = cms.InputTag("selectedPatJets" + p)
# getattr(process, "QGTagger" + p).isPatJet = cms.untracked.bool(True)
# getattr(process, "QGTagger" + p).useCHS = cms.untracked.bool(False)
#
# process.QuarkGluonTagger.replace(process.QGTagger, getattr(process, 'QGTagger' + p))
if runCHS:
chsP = p + "chs"
# setattr(process, 'QGTagger' + chsP, process.QGTagger.clone())
# getattr(process, "QGTagger" + chsP).srcJets = cms.InputTag("selectedPatJets" + chsP)
# getattr(process, "QGTagger" + chsP).isPatJet = cms.untracked.bool(True)
# getattr(process, "QGTagger" + chsP).useCHS = cms.untracked.bool(True)
# process.QuarkGluonTagger.replace(getattr(process, 'QGTagger' + p), getattr(process, 'QGTagger' + p) + getattr(process, 'QGTagger' + chsP))
print "##########################"
print "Calo jets" if processCaloJets else "No processing of calo jets"
print "##########################"
usePFIso(process, "")
#adaptPFIsoPhotons(process, process.patPhotons, "", "03")
# chiara init ----------------------------------
print "##########################"
print "CA8 Jets" if processCA8Jets else "No processing of CA8 jets collection"
print "##########################"
if processCA8Jets:
from PhysicsTools.PatAlgos.tools.jetTools import addJetCollection
# Reco CA 0.8 jets
# non sapendo quali parametri usare esattamente lascerei i default della reco per ora.
# Per doAreaFastjet e doRhoFastjet per il momento usiamo quanto e' ridefinito sopra
from RecoJets.JetProducers.ca4PFJets_cfi import ca4PFJets
process.ca8PFJetsPFlow = ca4PFJets.clone(
rParam = cms.double(0.8)
# src = cms.InputTag('pfNoElectron'+postfix),
# doAreaFastjet = cms.bool(True),
# doRhoFastjet = cms.bool(True),
# Rho_EtaMax = cms.double(6.0),
# Ghost_EtaMax = cms.double(7.0)
)
# Gen CA 0.8 jets
from RecoJets.JetProducers.ca4GenJets_cfi import ca4GenJets
process.ca8GenJetsNoNu = ca4GenJets.clone(
rParam = cms.double(0.8),
src = cms.InputTag("genParticlesForJetsNoNu")
)
# chiara end ----------------------------------
if processCaloJets:
# No L2L3 Residual on purpose
jetCorrections = ('AK5Calo', ['L1Offset', 'L2Relative', 'L3Absolute'])
addJetCollection(process, cms.InputTag('ak7CaloJets'),
'AK7',
'Calo',
doJTA = True,
doBTagging = True,
jetCorrLabel = jetCorrections,
doType1MET = correctMETWithT1,
doL1Cleaning = False,
doL1Counters = False,
genJetCollection = cms.InputTag("ak7GenJets"),
doJetID = True,
jetIdLabel = "ak7"
)
switchJetCollection(process, cms.InputTag('ak5CaloJets'),
doJTA = True,
doBTagging = True,
jetCorrLabel = jetCorrections,
doType1MET = correctMETWithT1,
genJetCollection = cms.InputTag("ak5GenJets"),
doJetID = True,
jetIdLabel = "ak5"
)
process.selectedPatJets.cut = "pt > 2"
process.selectedPatJetsAK7Calo.cut = "pt > 2"
else:
removeSpecificPATObjects(process, names = ['Jets', 'METs'])
if not runOnMC:
# Remove MC Matching
removeMCMatching(process, names = ["All"])
removeSpecificPATObjects(process, names = ['Electrons', 'Muons', 'Taus'])
if runCHS:
print "##########################"
print "Running CHS sequence"
print "##########################"
process.analysisSequence = cms.Sequence()
process.analysisSequence *= process.sequence_nochs
#if runCHS:
# process.analysisSequence *= process.sequence_chs
# chiara init ----------------------------------
if processCA8Jets:
process.analysisSequence *= process.ca8PFJetsPFlow
print("done process.ca8PFJetsPFlow")
process.analysisSequence *= process.ca8GenJetsNoNu
print("done process.ca8GenJetsNoNu")
# nuovo
# chiara end ----------------------------------
#GIULIA
# Quark Gluon tagging
#process.analysisSequence *= process.QuarkGluonTagger
# Add default pat sequence to our path
# This brings to life TcMET, Calo jets and Photons
########process.analysisSequence *= process.patDefaultSequence
# Add our PhotonIsolationProducer to the analysisSequence. This producer compute pf isolations
# for our photons
process.photonPFIsolation = cms.EDProducer("PhotonIsolationProducer",
src = cms.InputTag("selectedPatPhotons")
)
##########process.analysisSequence *= process.photonPFIsolation
# Filtering
# require physics declared
process.load('HLTrigger.special.hltPhysicsDeclared_cfi')
process.hltPhysicsDeclared.L1GtReadoutRecordTag = 'gtDigis'
# require scraping filter
process.scrapingVeto = cms.EDFilter("FilterOutScraping",
applyfilter = cms.untracked.bool(True),
debugOn = cms.untracked.bool(False),
numtrack = cms.untracked.uint32(10),
thresh = cms.untracked.double(0.25)
)
# Count events
process.nEventsTotal = cms.EDProducer("EventCountProducer")
process.nEventsFiltered = cms.EDProducer("EventCountProducer")
# MET Filters
process.load("RecoMET.METFilters.metFilters_cff")
# HCAL Laser filter : work only on Winter13 rereco
process.load("EventFilter.HcalRawToDigi.hcallaserFilterFromTriggerResult_cff")
# Let it run
process.p = cms.Path(
process.nEventsTotal +
# Filters
process.hcalfilter +
process.primaryVertexFilter +
process.scrapingVeto +
process.metFilters +
process.goodOfflinePrimaryVertices +
# Physics
process.analysisSequence +
process.nEventsFiltered
)
if runOnMC:
process.p.remove(process.hcalfilter)
process.p.remove(process.scrapingVeto)
# Add PF2PAT output to the created file
from PhysicsTools.PatAlgos.patEventContent_cff import patEventContentNoCleaning
#process.load("CommonTools.ParticleFlow.PF2PAT_EventContent_cff")
process.out.outputCommands = cms.untracked.vstring('drop *',
#process.out.outputCommands = cms.untracked.vstring('keep *') #'drop *',
'keep *_*_*_SIM',
'keep *_*_*_HLT',
'keep *_*_*_RECO',
'keep *_*ca8*_*_PAT')
#'keep *_photonCore_*_*',
#'keep double_kt6*Jets*_rho_*',
#'keep *_goodOfflinePrimaryVertices_*_*',
#'keep recoPFCandidates_particleFlow_*_*',
# Content of *patEventContentNoCleaning
#'keep *_selectedPatPhotons*_*_*', 'keep *_selectedPatElectrons*_*_*', 'keep *_selectedPatMuons*_*_*', 'keep *_selectedPatTaus*_*_*', 'keep *_selectedPatJets*_*_*', 'drop *_selectedPatJets_pfCandidates_*', 'drop *_*PF_caloTowers_*', 'drop *_*JPT_pfCandidates_*', 'drop *_*Calo_pfCandidates_*', 'keep *_patMETs*_*_*', 'keep *_selectedPatPFParticles*_*_*', 'keep *_selectedPatTrackCands*_*_*',
#'keep *_cleanPatPhotons*_*_*', 'keep *_cleanPatElectrons*_*_*', 'keep *_cleanPatMuons*_*_*', 'keep *_cleanPatTaus*_*_*',
#'keep *_cleanPatJets*_*_*', 'keep *_cleanPatHemispheres*_*_*', 'keep *_cleanPatPFParticles*_*_*',
#'keep *_cleanPatTrackCands*_*_*',
#'drop *_*PFlow_caloTowers_*',
# Type I residual
#'drop *_selectedPatJetsForMET*_*_PAT',
#'keep *_patPFMet*_*_PAT', # Keep raw met
# Trigger
#'keep *_TriggerResults_*_HLT',
# Debug
#'keep *_pf*_*_PAT'
# Photon ID
#'keep *_patConversions*_*_*',
#'keep *_photonPFIsolation*_*_*',
# Quark Gluon tagging
#'keep *_QGTagger*_*_*',
#'drop *_kt6PFJetsIsoQG_*_PAT',
#'drop *_kt6PFJetsQG_*_PAT',
# MC truth
#'keep *_genParticles_*_*'
#)
if runOnMC:
process.out.outputCommands.extend(['keep *_addPileupInfo_*_*', 'keep *_generator_*_*'])
# switch on PAT trigger
# from PhysicsTools.PatAlgos.tools.trigTools import switchOnTrigger
# switchOnTrigger( process )
## ------------------------------------------------------
# In addition you usually want to change the following
# parameters:
## ------------------------------------------------------
#
process.GlobalTag.globaltag = "%s::All" % (globalTag) ## (according to https://twiki.cern.ch/twiki/bin/view/CMS/SWGuideFrontierConditions)
# ##
#process.source.fileNames = cms.untracked.vstring('file:input_data.root') ## (e.g. 'file:AOD.root')
# ##
#process.maxEvents.input = 2500
process.maxEvents.input = 5000
# ##
# process.out.outputCommands = [ ... ] ## (e.g. taken from PhysicsTools/PatAlgos/python/patEventContent_cff.py)
# ##
process.options.wantSummary = False ## (to suppress the long output at the end of the job)
process.MessageLogger.cerr.FwkReport.reportEvery = 1000
# Remove annoying ecalLaser messages
process.MessageLogger.suppressError = cms.untracked.vstring ('ecalLaserCorrFilter')
return process
def loadPAT(process,jetMetCorrections,extMatch):
#-- Changes for electron and photon ID ----------------------------------------
from PhysicsTools.PatAlgos.tools.pfTools import usePFIso
usePFIso( process )
process.patElectrons.isolationValues = cms.PSet(
pfNeutralHadrons = cms.InputTag("elPFIsoValueNeutral03PFIdPFIso"),
pfChargedAll = cms.InputTag("elPFIsoValueChargedAll03PFIdPFIso"),
pfPUChargedHadrons = cms.InputTag("elPFIsoValuePU03PFIdPFIso"),
pfPhotons = cms.InputTag("elPFIsoValueGamma03PFIdPFIso"),
pfChargedHadrons = cms.InputTag("elPFIsoValueCharged03PFIdPFIso")
)
process.patElectrons.isolationValuesNoPFId = cms.PSet(
pfNeutralHadrons = cms.InputTag("elPFIsoValueNeutral03NoPFIdPFIso"),
pfChargedAll = cms.InputTag("elPFIsoValueChargedAll03NoPFIdPFIso"),
pfPUChargedHadrons = cms.InputTag("elPFIsoValuePU03NoPFIdPFIso"),
pfPhotons = cms.InputTag("elPFIsoValueGamma03NoPFIdPFIso"),
pfChargedHadrons = cms.InputTag("elPFIsoValueCharged03NoPFIdPFIso")
)
process.patDefaultSequence.replace(process.patElectrons,process.eleIsoSequence+process.patElectrons)
process.patDefaultSequence.replace(process.patMuons,process.muIsoSequence+process.patMuons)
# Turn off photon-electron cleaning (i.e., flag only)
process.cleanPatPhotons.checkOverlaps.electrons.requireNoOverlaps = False
# Embed tracks, since we drop them
process.patElectrons.embedTrack = True
process.patMuons.embedTrack = True
#include tau decay mode in pat::Taus (elese it will just be uninitialized)
#decay modes are dropped and have to be redone, this is a bit dangorous since the decay modes insered are *not* the ones used in RECO
#process.patTaus.addDecayMode = True
#process.makePatTaus.replace( process.patTaus, process.shrinkingConePFTauDecayModeProducer + process.patTaus )
#Additional electron ids as defined for VBTF
process.load("ElectroWeakAnalysis.WENu.simpleEleIdSequence_cff")
process.patElectrons.electronIDSources = cms.PSet(
eidTight = cms.InputTag("eidTight"),
eidLoose = cms.InputTag("eidLoose"),
eidRobustTight = cms.InputTag("eidRobustTight"),
eidRobustHighEnergy = cms.InputTag("eidRobustHighEnergy"),
eidRobustLoose = cms.InputTag("eidRobustLoose"),
simpleEleId95relIso= cms.InputTag("simpleEleId95relIso"),
simpleEleId90relIso= cms.InputTag("simpleEleId90relIso"),
simpleEleId85relIso= cms.InputTag("simpleEleId85relIso"),
simpleEleId80relIso= cms.InputTag("simpleEleId80relIso"),
simpleEleId70relIso= cms.InputTag("simpleEleId70relIso"),
simpleEleId60relIso= cms.InputTag("simpleEleId60relIso"),
simpleEleId95cIso= cms.InputTag("simpleEleId95cIso"),
simpleEleId90cIso= cms.InputTag("simpleEleId90cIso"),
simpleEleId85cIso= cms.InputTag("simpleEleId85cIso"),
simpleEleId80cIso= cms.InputTag("simpleEleId80cIso"),
simpleEleId70cIso= cms.InputTag("simpleEleId70cIso"),
simpleEleId60cIso= cms.InputTag("simpleEleId60cIso"))
process.patDefaultSequence.replace(process.patElectrons,process.simpleEleIdSequence+process.patElectrons)
#-- Tuning of Monte Carlo matching --------------------------------------------
# Also match with leptons of opposite charge
process.electronMatch.checkCharge = False
process.electronMatch.maxDeltaR = cms.double(0.2)
process.electronMatch.maxDPtRel = cms.double(999999.)
process.muonMatch.checkCharge = False
process.muonMatch.maxDeltaR = cms.double(0.2)
process.muonMatch.maxDPtRel = cms.double(999999.)
#process.tauMatch.checkCharge = False
#process.tauMatch.maxDeltaR = cms.double(0.3)
process.patJetPartonMatch.maxDeltaR = cms.double(0.25)
process.patJetPartonMatch.maxDPtRel = cms.double(999999.)
process.patJetGenJetMatch.maxDeltaR = cms.double(0.25)
process.patJetGenJetMatch.maxDPtRel = cms.double(999999.)
if extMatch:
process.electronMatch.mcStatus = cms.vint32(1,5)
process.electronMatch.matched = "mergedTruth"
process.muonMatch.mcStatus = cms.vint32(1,5)
process.muonMatch.matched = "mergedTruth"
process.patJetPartonMatch.matched = "mergedTruth"
process.patJetPartons.src = "mergedTruth"
process.photonMatch.matched = "mergedTruth"
#process.tauGenJets.GenParticles = "mergedTruth"
#process.tauMatch.matched = "mergedTruth"
#-- Taus ----------------------------------------------------------------------
#some tau discriminators have been switched off during development. They can be switched on again...
#setattr(process.patTaus.tauIDSources, "trackIsolation", cms.InputTag("shrinkingConePFTauDiscriminationByTrackIsolation"))
#setattr(process.patTaus.tauIDSources, "ecalIsolation", cms.InputTag("shrinkingConePFTauDiscriminationByECALIsolation"))
#setattr(process.patTaus.tauIDSources, "byIsolation", cms.InputTag("shrinkingConePFTauDiscriminationByIsolation"))
#setattr(process.patTaus.tauIDSources, "leadingPionPtCut", cms.InputTag("shrinkingConePFTauDiscriminationByLeadingPionPtCut"))
#setattr(process.patTaus.tauIDSources, "trackIsolationUsingLeadingPion", cms.InputTag("shrinkingConePFTauDiscriminationByTrackIsolationUsingLeadingPion"))
#setattr(process.patTaus.tauIDSources, "ecalIsolationUsingLeadingPion", cms.InputTag("shrinkingConePFTauDiscriminationByECALIsolationUsingLeadingPion"))
#setattr(process.patTaus.tauIDSources, "byIsolationUsingLeadingPion", cms.InputTag("shrinkingConePFTauDiscriminationByIsolationUsingLeadingPion"))
#setattr(process.patTaus.tauIDSources, "byTaNC", cms.InputTag("shrinkingConePFTauDiscriminationByTaNC"))
#setattr(process.patTaus.tauIDSources, "byTaNCfrOnePercent", cms.InputTag("shrinkingConePFTauDiscriminationByTaNCfrOnePercent"))
#setattr(process.patTaus.tauIDSources, "byTaNCfrHalfPercent", cms.InputTag("shrinkingConePFTauDiscriminationByTaNCfrHalfPercent"))
#setattr(process.patTaus.tauIDSources, "byTaNCfrQuarterPercent", cms.InputTag("shrinkingConePFTauDiscriminationByTaNCfrQuarterPercent"))
#setattr(process.patTaus.tauIDSources, "byTaNCfrTenthPercent", cms.InputTag("shrinkingConePFTauDiscriminationByTaNCfrTenthPercent"))
#-- Jet corrections -----------------------------------------------------------
# L1 FastJet jet corrections
# kt6PFJets for FastJet corrections are already run and placed before jetCorrection calculation
# apply FastJet corrections only if demanded
# TODO: Check if still necessary to switch here
if ("L1FastJet" in jetMetCorrections):
process.pfJets.doAreaFastjet = True
process.pfJetsPF.doAreaFastjet = True
def configurePatTuple(process, isMC=True, **kwargs):
'''
Core function for PATTuple production
'''
#fix argparser output
isMC = bool(isMC)
########################
## ##
## PATTuple content ##
## ##
########################
# Stuff we always keep
output_commands = [
'*_addPileupInfo_*_*',
'edmMergeableCounter_*_*_*',
'*_lumiProducer_*_*',
'*_particleFlow_*_*',
'*_offlineBeamSpot_*_*',
'*_generalTracks_*_*',
'*_electronGsfTracks_*_*',
'*_gsfElectrons_*_*',
'*_gsfElectronCores_*_*',
'*_offlinePrimaryVertices*_*_*',
'*_ak5GenJets_*_*',
'*_hltTriggerSummaryAOD_*_*',
'edmTriggerResults_TriggerResults_*_%s' % process.name_(),
'*_MEtoEDMConverter*_*_%s' % process.name_(),
'LHEEventProduct_*_*_*',
'GenEventInfoProduct_generator_*_*',
'*_kt6PFJetsForRhoComputationVoronoi_rho_*',
'*_kt6PFJetsForIso_rho_*',
'*_kt6PFJets_rho_*',
'*_kt6PFJetsHZGPho_rho_*',
'*_kt6PFJetsCentralHZGEle_rho_*',
'*_kt6PFJetsCentralHZGMu_rho_*',
'*_kt6PFJetsCentralNeutralHZGMu_rho_*',
'*_kt6PFJetsCentral_rho_*',
'*_kt6PFJetsCentralNeutral_rho_*', # for zz muons
'*_photonCore_*_*',
'*_boostedFsrPhotons_*_*',
# for Zmumu -> embedded samples
# https://twiki.cern.ch/twiki/bin/view/CMS/MuonTauReplacementRecHit
'*_generalTracksORG_*_EmbeddedRECO',
'*_electronGsfTracksORG_*_EmbeddedRECO',
'double_TauSpinnerReco_TauSpinnerWT_EmbeddedSPIN',
'double_ZmumuEvtSelEffCorrWeightProducer_weight_EmbeddedRECO',
'double_muonRadiationCorrWeightProducer_weight_EmbeddedRECO',
'GenFilterInfo_generator_minVisPtFilter_EmbeddedRECO',
]
# Define our patTuple production sequence
process.tuplize = cms.Sequence()
# Only keep interesting genParticles
process.load("FinalStateAnalysis.RecoTools.genParticleTrimmer_cfi")
process.genParticles = process.prunedGenParticles.clone()
if isMC:
#process.tuplize += process.genParticles
#output_commands.append('*_genParticles_*_%s' % process.name_())
output_commands.append('*_genParticles_*_*')
output_commands.append('*_tauGenJetsSelectorAllHadrons_*_*')
output_commands.append('*_tauGenJets_*_*')
output_commands.append('*_ak5GenJets_*_*')
########################
## ##
## PAT ##
## ##
########################
# Run pat default sequence
process.load("PhysicsTools.PatAlgos.patSequences_cff")
# Embed PF Isolation in electrons & muons
pfTools.usePFIso(process)
# Setup H2Tau custom iso definitions
setup_h2tau_iso(process)
# Setup hZg custom iso definitions
add_hZg_iso_needs(process)
# Now run PAT
process.tuplize += process.patDefaultSequence
# Add FSR photons for ZZ analysis
process.load("FinalStateAnalysis.PatTools.fsrPhotons_cff")
process.tuplize += process.fsrPhotonSequence
########################
## GEN ##
########################
# Disable gen match embedding - we keep it in the ntuple
process.patMuons.embedGenMatch = False
process.patElectrons.embedGenMatch = False
process.patTaus.embedGenMatch = False
process.patTaus.embedGenJetMatch = False
process.patPhotons.embedGenMatch = False
if not isMC:
coreTools.runOnData(process)
########################
## MUONS ##
########################
# Unembed junk
process.patMuons.embedCaloMETMuonCorrs = False
process.patMuons.embedTcMETMuonCorrs = False
process.patMuons.embedTrack = True
process.patMuons.pvSrc = cms.InputTag("selectedPrimaryVertex")
process.load("FinalStateAnalysis.PatTools.patMuonProduction_cff")
final_muon_collection = chain_sequence(
process.customizeMuonSequence, "selectedPatMuons")
process.customizeMuonSequence.insert(0, process.selectedPatMuons)
process.patDefaultSequence.replace(process.selectedPatMuons,
process.customizeMuonSequence)
process.cleanPatMuons.src = final_muon_collection
process.patMuonRochesterCorrectionEmbedder.isMC = cms.bool(bool(isMC))
########################
## TAUS ##
########################
# Use HPS taus
tautools.switchToPFTauHPS(process) #this NEEDS a sequence called patDefaultSequence
# Disable tau IsoDeposits
process.patDefaultSequence.remove(process.patPFTauIsolation)
process.patTaus.isoDeposits = cms.PSet()
process.patTaus.userIsolation = cms.PSet()
process.load("FinalStateAnalysis.PatTools.patTauProduction_cff")
# Require all taus to pass decay mode finding and have high PT
process.patTauGarbageRemoval.cut = cms.string(
"pt > 17 && abs(eta) < 2.5 && tauID('decayModeFindingNewDMs')")
final_tau_collection = chain_sequence(
process.customizeTauSequence, "selectedPatTaus")
# Inject into the pat sequence
process.customizeTauSequence.insert(0, process.selectedPatTaus)
process.patDefaultSequence.replace(process.selectedPatTaus,
process.customizeTauSequence)
process.cleanPatTaus.src = final_tau_collection
# Remove muons and electrons
process.cleanPatTaus.checkOverlaps.muons.requireNoOverlaps = False
process.cleanPatTaus.checkOverlaps.electrons.requireNoOverlaps = False
# Cuts already applied by the garbage removal
process.cleanPatTaus.preselection = ''
process.cleanPatTaus.finalCut = ''
########################
## ELECTRONS ##
########################
# Use POG recommendations for (these) electron Isos
process.elPFIsoValueGamma04PFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.08)')
process.elPFIsoValueGamma04NoPFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.08)')
process.elPFIsoValueCharged04PFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.015)')
process.elPFIsoValueCharged04NoPFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.015)')
# Do extra electron ID
process.load("FinalStateAnalysis.PatTools.electrons.electronID_cff")
if cmssw_major_version() == 4:
process.patDefaultSequence.replace(process.patElectrons,
process.recoElectronID42X +
process.patElectrons)
process.patElectrons.electronIDSources = process.electronIDSources42X
else:
process.patDefaultSequence.replace(process.patElectrons,
process.recoElectronID5YX +
process.patElectrons)
process.patElectrons.electronIDSources = process.electronIDSources5YX
process.electronMatch.checkCharge = cms.bool(False)
process.patElectrons.embedTrack = False
process.patElectrons.embedPFCandidate = False
process.patElectrons.embedGsfElectronCore = False
process.patElectrons.embedSuperCluster = True
# Produce the electron collections
process.load("FinalStateAnalysis.PatTools.patElectronProduction_cff")
# Electron Energy Regression and Calibrations
process.load(
"EgammaAnalysis.ElectronTools.electronRegressionEnergyProducer_cfi")
process.load("EgammaAnalysis.ElectronTools.calibratedPatElectrons_cfi")
#setup the energy regression for the specific dataset
if kwargs['eleReg']:
print "-- Applying Electron Regression and Calibration --"
process.customizeElectronSequence += process.eleRegressionEnergy
process.customizeElectronSequence += process.calibratedPatElectrons
process.eleRegressionEnergy.energyRegressionType = cms.uint32(2)
process.calibratedPatElectrons.correctionsType = cms.int32(2)
if isMC:
process.calibratedPatElectrons.inputDataset = cms.string(
"Summer12_LegacyPaper")
else:
process.calibratedPatElectrons.inputDataset = cms.string(
"22Jan2013ReReco")
process.calibratedPatElectrons.combinationType = cms.int32(3)
process.calibratedPatElectrons.lumiRatio = cms.double(1.0)
process.calibratedPatElectrons.synchronization = cms.bool(True)
process.calibratedPatElectrons.isMC = cms.bool(isMC == 1)
process.calibratedPatElectrons.verbose = cms.bool(False)
final_electron_collection = chain_sequence(
process.customizeElectronSequence, "selectedPatElectrons",
# Some of the EGamma modules have non-standard src InputTags,
# specify them here.
("src", "inputPatElectronsTag", "inputElectronsTag")
)
#process.tuplize += process.customizeElectronSequence #why do we need this?
process.customizeElectronSequence.insert(0, process.selectedPatElectrons)
process.patDefaultSequence.replace(process.selectedPatElectrons,
process.customizeElectronSequence)
# We have to do the pat Jets before the pat electrons since we embed them
process.customizeElectronSequence.insert(0, process.selectedPatJets)
# Define cleanPatElectrons input collection
process.cleanPatElectrons.src = final_electron_collection
# Define the default lepton cleaning
process.cleanPatElectrons.preselection = cms.string(
'pt > 5')
process.cleanPatElectrons.checkOverlaps.muons.requireNoOverlaps = False
# Make sure we don't kill any good taus by calling them electrons
# Note that we don't actually remove these overlaps.
process.cleanPatElectrons.checkOverlaps.taus = cms.PSet(
src=final_tau_collection,
algorithm=cms.string("byDeltaR"),
preselection=cms.string(
"tauID('decayModeFinding') > 0.5 &&"
"tauID('byLooseCombinedIsolationDeltaBetaCorr') > 0.5 &&"
"tauID('againstElectronLoose') > 0.5 && "
"pt > 10"
),
deltaR=cms.double(0.1),
checkRecoComponents=cms.bool(False),
pairCut=cms.string(""),
requireNoOverlaps=cms.bool(False),
)
########################
## JETS ##
########################
# Use PFJets and turn on JEC
jec = ['L1FastJet', 'L2Relative', 'L3Absolute']
# If we are running on data (not MC), or embedded sample,
# apply the MC-DATA residual correction.
if not isMC or kwargs['embedded']:
jec.extend(['L2L3Residual'])
# tmp
# define the b-tag squences for offline reconstruction
process.load("RecoBTag.SecondaryVertex.secondaryVertex_cff")
process.load("RecoBTau.JetTagComputer.combinedMVA_cff")
process.load('RecoVertex/AdaptiveVertexFinder/inclusiveVertexing_cff')
process.load('RecoBTag/SecondaryVertex/bToCharmDecayVertexMerger_cfi')
#process.load("PhysicsTools.PatAlgos.patSequences_cff")
# Define options for BTagging - these are release dependent.
btag_options = {'doBTagging': True}
if cmssw_major_version() == 5:
btag_options['btagInfo'] = [
'impactParameterTagInfos',
'secondaryVertexTagInfos',
'softMuonTagInfos',
'secondaryVertexNegativeTagInfos',
'inclusiveSecondaryVertexFinderFilteredTagInfos'
]
btag_options['btagdiscriminators'] = [
'trackCountingHighEffBJetTags',
'trackCountingHighPurBJetTags',
'simpleSecondaryVertexHighEffBJetTags',
'simpleSecondaryVertexHighPurBJetTags',
'simpleInclusiveSecondaryVertexHighEffBJetTags',
'simpleInclusiveSecondaryVertexHighPurBJetTags',
'combinedSecondaryVertexMVABJetTags',
'combinedSecondaryVertexBJetTags',
'jetBProbabilityBJetTags',
'jetProbabilityBJetTags',
]
#Avoid embedding
process.patJets.embedPFCandidates = True
process.patJets.embedCaloTowers = False
process.patJets.embedGenJetMatch = True
process.patJets.addAssociatedTracks = True
process.patJets.embedGenPartonMatch = True
# Add AK5chs PFJets
jettools.addJetCollection(
process,
cms.InputTag('ak5PFchsJets'),
algoLabel = "AK5",
typeLabel = "PFchs",
doJTA = True,
jetCorrLabel = ('AK5PFchs', jec),
doType1MET = False,
doL1Cleaning = False,
doL1Counters = False,
genJetCollection = cms.InputTag('ak5GenJets'),
doJetID = True,
**btag_options
)
# Use AK5 PFJets
jettools.switchJetCollection(
process,
cms.InputTag('ak5PFJets'),
doJTA=True,
jetCorrLabel=('AK5PF', jec),
#jetCorrLabel = None,
doType1MET=False,
doJetID=True,
genJetCollection=cms.InputTag("ak5GenJets"),
**btag_options
)
# Customize/embed all our sequences
process.load("FinalStateAnalysis.PatTools.patJetProduction_cff")
helpers.cloneProcessingSnippet( process, process.customizeJetSequence, 'AK5PFchs' )
process.patJetGarbageRemoval.cut = 'pt > 12'
final_jet_collection = chain_sequence(
process.customizeJetSequence, "patJets")
process.customizeJetSequence.insert(0, process.patJets)
# Make it a "complete" sequence
process.customizeJetSequence += process.selectedPatJets
# process.customizeJetSequence += process.btagging
# We can't mess up the selected pat jets because the taus use them.
process.selectedPatJets.src = final_jet_collection
process.patDefaultSequence.replace(process.patJets,
process.customizeJetSequence)
process.customizeJetSequenceAK5PFchs.remove( process.patJetsPUIDAK5PFchs )
process.customizeJetSequenceAK5PFchs.remove( process.pileupJetIdProducerAK5PFchs )
process.patJetGarbageRemovalAK5PFchs.cut = 'pt > 20'
process.patJetCorrFactorsAK5PFchs.payload = cms.string('AK5PFchs')
final_jetchs_collection = chain_sequence(
process.customizeJetSequenceAK5PFchs, "patJetsAK5PFchs")
process.customizeJetSequenceAK5PFchs.insert(0, process.patJetsAK5PFchs)
# Make it a "complete" sequence
process.customizeJetSequenceAK5PFchs += process.selectedPatJetsAK5PFchs
# We can't mess up the selected pat jets because the taus use them.
process.selectedPatJetsAK5PFchs.src = final_jetchs_collection
process.selectedPatJetsAK5chsPF = process.selectedPatJetsAK5PFchs.clone() #that's what we keep
process.customizeJetSequenceAK5PFchs += process.selectedPatJetsAK5chsPF
process.patDefaultSequence.replace(process.patJetsAK5PFchs,
process.customizeJetSequenceAK5PFchs)
output_commands.append('*_selectedPatJets_*_*')
output_commands.append('*_selectedPatJetsAK5chsPF_*_*')
output_commands.append('*SecondaryVertexTagInfo*_*_*_*')
output_commands.append('*TrackIPTagInfo*_*_*_*')
output_commands.append('*SoftLeptonTagInfo*_*_*_*')
output_commands.append('*_ak5PFJets_*_*')
output_commands.append('*_ak5PFchsJets_*_*')
########################
## MET ##
########################
# Use PFMEt
mettools.addPfMET(process)
# We cut out a lot of the junky taus and jets - but we need these
# to correctly apply the MET uncertainties. So, let's make a
# non-cleaned version of the jet and tau sequence.
process.jetsForMetSyst = helpers.cloneProcessingSnippet(
process, process.customizeJetSequence, 'ForMETSyst')
process.tausForMetSyst = helpers.cloneProcessingSnippet(
process, process.customizeTauSequence, 'ForMETSyst')
# Don't apply any cut for these
process.patTauGarbageRemovalForMETSyst.cut = ''
process.patJetGarbageRemovalForMETSyst.cut = ''
process.tuplize += process.jetsForMetSyst
process.tuplize += process.tausForMetSyst
# We have to make our clone of cleanPatTaus separately, since e/mu
# cleaning is applied - therefore it isn't in the customizeTausSequence.
process.cleanPatTausForMETSyst = process.cleanPatTaus.clone(
src=cms.InputTag(process.cleanPatTaus.src.value() + "ForMETSyst"))
process.cleanPatTausForMETSyst.preselection = ''
process.cleanPatTausForMETSyst.finalCut = ''
process.patTausEmbedJetInfoForMETSyst.jetSrc = \
final_jet_collection.value() + "ForMETSyst"
process.tuplize += process.cleanPatTausForMETSyst
# Setup MET production
process.load("FinalStateAnalysis.PatTools.patMETProduction_cff")
# The MET systematics depend on all other systematics
process.systematicsMET.tauSrc = cms.InputTag("cleanPatTausForMETSyst")
process.systematicsMET.muonSrc = cms.InputTag("cleanPatMuons")
process.systematicsMET.electronSrc = cms.InputTag("cleanPatElectrons")
final_met_collection = chain_sequence(
process.customizeMETSequence, "patMETsPF")
process.tuplize += process.customizeMETSequence
process.patMETsPF.addGenMET = bool(isMC)
output_commands.append('*_%s_*_*' % final_met_collection.value())
# Make a version with the MVA MET reconstruction method
process.load("FinalStateAnalysis.PatTools.met.mvaMetOnPatTuple_cff")
process.tuplize += process.pfMEtMVAsequence
mva_met_sequence = helpers.cloneProcessingSnippet(
process, process.customizeMETSequence, "MVA")
final_mvamet_collection = chain_sequence(
mva_met_sequence, "patMEtMVA")
process.tuplize += mva_met_sequence
output_commands.append('*_%s_*_*' % final_mvamet_collection.value())
# Keep all the data formats needed for the systematics
output_commands.append('recoLeafCandidates_*_*_%s'
% process.name_())
# We can drop to jet and tau MET specific products. They were only used for
# computation of the MET numbers.
output_commands.append('drop recoLeafCandidates_*ForMETSyst_*_%s'
% process.name_())
########################
## PHOTONS ##
########################
#alter the photon matching to accept various fakes
# and sort matches by d-pt-rel
if isMC:
process.photonMatch = cms.EDProducer(
"MCMatcherByPt",
src=cms.InputTag("photons"),
maxDPtRel=cms.double(100.0),
mcPdgId=cms.vint32(),
mcStatus=cms.vint32(1),
resolveByMatchQuality=cms.bool(False),
maxDeltaR=cms.double(0.3),
checkCharge=cms.bool(False),
resolveAmbiguities=cms.bool(True),
matched=cms.InputTag("genParticles")
)
# Setup pat::Photon Production
process.load("FinalStateAnalysis.PatTools.patPhotonProduction_cff")
final_photon_collection = chain_sequence(process.customizePhotonSequence,
"selectedPatPhotons")
#setup PHOSPHOR for a specific dataset
if cmssw_major_version() == 4: # for now 2011 = CMSSW42X
process.patPhotonPHOSPHOREmbedder.year = cms.uint32(2011)
else: # 2012 is 5YX
process.patPhotonPHOSPHOREmbedder.year = cms.uint32(2012)
process.patPhotonPHOSPHOREmbedder.isMC = cms.bool(bool(isMC))
#inject photons into pat sequence
process.customizePhotonSequence.insert(0, process.selectedPatPhotons)
process.patDefaultSequence.replace(process.selectedPatPhotons,
process.customizePhotonSequence)
process.cleanPatPhotons.src = final_photon_collection
########################
## TRIGGER ##
########################
trigtools.switchOnTrigger(process)
#configure the PAT trigger
if kwargs['HLTprocess']:
process.patTrigger.processName = cms.string(kwargs['HLTprocess'])
process.patTriggerEvent.processName = cms.string(kwargs['HLTprocess'])
########################
## -------------- ##
########################
output_commands.append('*_cleanPatTaus_*_*')
output_commands.append('*_cleanPatElectrons_*_*')
output_commands.append('*_cleanPatMuons_*_*')
output_commands.append('*_cleanPatPhotons_*_*')
########################
## ##
## FSA ##
## ##
########################
# Now build the PATFinalStateLS object, which holds LumiSection info.
process.load(
"FinalStateAnalysis.PatTools.finalStates.patFinalStateLSProducer_cfi")
process.tuplize += process.finalStateLS
output_commands.append('*_finalStateLS_*_*')
if isMC:
process.finalStateLS.xSec = kwargs['xSec']
# Tell the framework to shut up!
process.load("FWCore.MessageLogger.MessageLogger_cfi")
process.MessageLogger.cerr.FwkReport.reportEvery = 1000
# Which collections are used to build the final states
fs_daughter_inputs = {
'electrons': 'cleanPatElectrons',
'muons': 'cleanPatMuons',
'taus': 'cleanPatTaus',
'photons': 'cleanPatPhotons',
'jets': 'selectedPatJets',
'pfmet': final_met_collection,
'mvamet': final_mvamet_collection,
}
# Setup all the PATFinalState objects
produce_final_states(process, fs_daughter_inputs, output_commands,
process.tuplize, kwargs['puTag'],
zzMode=kwargs.get('zzMode', False))
return process.tuplize, output_commands
def addInvHiggsProcess(process, iRunOnData=True, iData="PromptC2", iHLTFilter="MET", iMCSignal=False, iFile='/store/data/Run2012C/MET/AOD/PromptReco-v2/000/203/002/04BCEC26-AA02-E211-A81D-003048CF99BA.root', iMaxEvent=100):
###--------------------------------------------------------------
### Load PAT, because it insists on defining the process for you
#from PhysicsTools.PatAlgos.patTemplate_cfg import *
###--------------------------------------------------------------
###--------------------------------------------------------------
### Input
process.maxEvents.input = iMaxEvent
process.source.fileNames = [iFile]
###--------------------------------------------------------------
###--------------------------------------------------------------
### GlobalTag
if iRunOnData == True:
if (iData.find("Jul13")==0):
process.GlobalTag.globaltag = "FT_53_V6C_AN3::All"
elif (iData.find("Aug06")==0):
process.GlobalTag.globaltag = "FT_53_V6C_AN3::All"
elif (iData.find("Aug24")==0):
process.GlobalTag.globaltag = "FT53_V10A_AN3::All"
elif (iData.find("PromptC2")==0):
process.GlobalTag.globaltag = "GR_P_V42_AN3::All"
elif (iData.find("PromptD")==0):
process.GlobalTag.globaltag = "GR_P_V42_AN3::All"
elif (iData.find("Dec11")==0): #Run201191
process.GlobalTag.globaltag = "FT_P_V42C_AN3::All"
else:
process.GlobalTag.globaltag = "GR_P_V42_AN3::All"
else:
process.GlobalTag.globaltag = "START53_V7G::All"
###--------------------------------------------------------------
###--------------------------------------------------------------
### Logger
process.load("FWCore.MessageService.MessageLogger_cfi")
process.load("FWCore.MessageLogger.MessageLogger_cfi")
process.MessageLogger.cerr.FwkReport = cms.untracked.PSet(
reportEvery = cms.untracked.int32(2000),
limit = cms.untracked.int32(10000000)
)
###--------------------------------------------------------------
###--------------------------------------------------------------
### HLT Trigger(s)
# If it's MC signal, no trigger will be applied
if iRunOnData == False and iMCSignal == True:
iHLTFilter = "NoTrig"
# Load hltHighLevel
process.load('HLTrigger.HLTfilters.hltHighLevel_cfi')
process.hltHighLevel.TriggerResultsTag = cms.InputTag("TriggerResults","","HLT")
process.hltHighLevel.throw = cms.bool(False) # Tolerate if triggers not available
process.hltHighLevel.andOr = cms.bool(True) # True = OR, False = AND
if (iHLTFilter.find("MET")==0):
process.hltHighLevel.HLTPaths = cms.vstring(
"HLT_DiPFJet40_PFMETnoMu65_MJJ600VBF_LeadingJets_v*",
"HLT_DiPFJet40_PFMETnoMu65_MJJ800VBF_AllJets_v*"
)
elif (iHLTFilter.find("SingleMu")==0):
process.hltHighLevel.HLTPaths = cms.vstring("HLT_IsoMu24_eta2p1_v*","HLT_Mu40_eta2p1_v*")
elif (iHLTFilter.find("DoubleMu")==0):
process.hltHighLevel.HLTPaths = cms.vstring("HLT_Mu17_Mu8_v*")
elif (iHLTFilter.find("SingleElectron")==0):
process.hltHighLevel.HLTPaths = cms.vstring("HLT_Ele27_WP80_v*")
elif (iHLTFilter.find("DoubleElectron")==0):
process.hltHighLevel.HLTPaths = cms.vstring("HLT_Ele17_CaloIdT_CaloIsoVL_TrkIdVL_TrkIsoVL_Ele8_CaloIdT_CaloIsoVL_TrkIdVL_TrkIsoVL_v*")
elif (iHLTFilter.find("NoTrig")==0):
process.hltHighLevel.HLTPaths = cms.vstring("*")
else:
process.hltHighLevel.HLTPaths = cms.vstring(
"HLT_DiPFJet40_PFMETnoMu65_MJJ600VBF_LeadingJets_v*",
"HLT_DiPFJet40_PFMETnoMu65_MJJ800VBF_AllJets_v*"
)
###--------------------------------------------------------------
###--------------------------------------------------------------
print "-----------------------------------------------"
print "INVISIBLE HIGGS: Ntuple V10"
print "-----------------------------------------------"
print "RunOnData = ", iRunOnData
if iRunOnData == True:
print "Dataset = ", iData
else:
if iMCSignal == True:
print "Dataset = MC Signal"
else:
print "Dataset = MC Background"
print "GlobalTag = ", process.GlobalTag.globaltag
print "Trigger = ", process.hltHighLevel.HLTPaths
print "Sample input file = ", iFile
print "Max events = ", iMaxEvent
print "-----------------------------------------------"
###--------------------------------------------------------------
###--------------------------------------------------------------
### Basic filters
# Track quality filter
process.noscraping = cms.EDFilter(
"FilterOutScraping",
applyfilter = cms.untracked.bool(True),
debugOn = cms.untracked.bool(False),
numtrack = cms.untracked.uint32(10),
thresh = cms.untracked.double(0.25)
)
# Require a good vertex
process.primaryVertexFilter = cms.EDFilter(
"VertexSelector",
src = cms.InputTag("offlinePrimaryVertices"),
cut = cms.string("!isFake && ndof > 4 && abs(z) <= 24 && position.Rho <= 2"),
filter = cms.bool(True)
)
###--------------------------------------------------------------
###--------------------------------------------------------------
### MET Filters
# The iso-based HBHE noise filter
process.load('CommonTools.RecoAlgos.HBHENoiseFilter_cfi')
# The CSC beam halo tight filter
process.load('RecoMET.METAnalyzers.CSCHaloFilter_cfi')
# The HCAL laser filter
process.load("RecoMET.METFilters.hcalLaserEventFilter_cfi")
process.load("EventFilter.HcalRawToDigi.hcallasereventfilter2012_cff")
process.hcallasereventfilter2012.eventFileName = cms.string('HCALLaser2012AllDatasets.txt.gz')
# The ECAL dead cell trigger primitive filter
process.load('RecoMET.METFilters.EcalDeadCellTriggerPrimitiveFilter_cfi')
# The EE bad SuperCrystal filter
process.load('RecoMET.METFilters.eeBadScFilter_cfi')
# The ECAL laser correction filter
process.load('RecoMET.METFilters.ecalLaserCorrFilter_cfi')
# The Good vertices collection needed by the tracking failure filter
process.goodVertices = cms.EDFilter(
"VertexSelector",
filter = cms.bool(False),
src = cms.InputTag("offlinePrimaryVertices"),
cut = cms.string("!isFake && ndof > 4 && abs(z) <= 24 && position.rho < 2")
)
# The tracking failure filter
process.load('RecoMET.METFilters.trackingFailureFilter_cfi')
# The tracking POG filters
process.load('RecoMET.METFilters.trackingPOGFilters_cff')
###--------------------------------------------------------------
###--------------------------------------------------------------
### customise PAT
process.load('JetMETCorrections.Configuration.DefaultJEC_cff')
from PhysicsTools.PatAlgos.tools.coreTools import removeMCMatching,runOnData
if iRunOnData == True:
removeMCMatching(process, ['All'])
runOnData(process)
# Add the PF MET
from PhysicsTools.PatAlgos.tools.metTools import addPfMET
addPfMET(process, 'PF')
# Switch to PF jets
from PhysicsTools.PatAlgos.tools.jetTools import switchJetCollection
if iRunOnData == True:
switchJetCollection(process,
cms.InputTag('ak5PFJets'),
doJTA = True,
doBTagging = True,
jetCorrLabel = ('AK5PF', ['L1FastJet', 'L2Relative', 'L3Absolute', 'L2L3Residual']),
doType1MET = True,
doJetID = False,
jetIdLabel = "ak5"
)
else:
switchJetCollection(process,
cms.InputTag('ak5PFJets'),
doJTA = True,
doBTagging = True,
jetCorrLabel = ('AK5PF', ['L1FastJet', 'L2Relative', 'L3Absolute']),
doType1MET = True,
genJetCollection = cms.InputTag("ak5GenJetsNoNu"),
doJetID = False,
jetIdLabel = "ak5"
)
from PhysicsTools.PatAlgos.tools.pfTools import usePFIso
usePFIso(process)
process.patMuons.isoDeposits = cms.PSet()
process.patMuons.isolationValues = cms.PSet()
process.patElectrons.isolationValues = cms.PSet(
pfChargedHadrons = cms.InputTag("elPFIsoValueCharged03PFIdPFIso"),
pfChargedAll = cms.InputTag("elPFIsoValueChargedAll03PFIdPFIso"),
pfPUChargedHadrons = cms.InputTag("elPFIsoValuePU03PFIdPFIso"),
pfNeutralHadrons = cms.InputTag("elPFIsoValueNeutral03PFIdPFIso"),
pfPhotons = cms.InputTag("elPFIsoValueGamma03PFIdPFIso")
)
process.patElectrons.isolationValuesNoPFId = cms.PSet(
pfChargedHadrons = cms.InputTag("elPFIsoValueCharged03NoPFIdPFIso"),
pfChargedAll = cms.InputTag("elPFIsoValueChargedAll03NoPFIdPFIso"),
pfPUChargedHadrons = cms.InputTag("elPFIsoValuePU03NoPFIdPFIso"),
pfNeutralHadrons = cms.InputTag("elPFIsoValueNeutral03NoPFIdPFIso"),
pfPhotons = cms.InputTag("elPFIsoValueGamma03NoPFIdPFIso")
)
process.patDefaultSequence.replace(process.patElectrons,process.eleIsoSequence+process.patElectrons)
process.cleanPatTaus.preselection = cms.string('tauID("decayModeFinding") > 0.5 & tauID("byLooseCombinedIsolationDeltaBetaCorr") > 0.5')
###--------------------------------------------------------------
###--------------------------------------------------------------
### Object (pre) selection
# Jet selection
process.selectedPatJets.cut = cms.string("pt>10. && abs(eta)<5.")
# Remove overlaps ???
# process.cleanPatJets.finalCut = "!hasOverlaps('electrons') && !hasOverlaps('muons')"
# Apply loose PF jet ID
from PhysicsTools.SelectorUtils.pfJetIDSelector_cfi import pfJetIDSelector
process.goodPatJets = cms.EDFilter("PFJetIDSelectionFunctorFilter",
filterParams = pfJetIDSelector.clone(),
src = cms.InputTag("selectedPatJets"),
filter = cms.bool(True)
)
process.selectedPatMuons.cut = cms.string("isGlobalMuon && pt>10. && abs(eta)<2.5")
process.selectedPatElectrons.cut = cms.string("pt>10. && abs(eta)<2.5")
###--------------------------------------------------------------
###--------------------------------------------------------------
### Load the PU JetID sequence
if iRunOnData == True:
process.load("CMGTools.External.pujetidsequence_cff")
process.puJetMva.jets = cms.InputTag("goodPatJets")
process.puJetId.jets = cms.InputTag("goodPatJets")
else:
process.load("CMGTools.External.pujetidsequence_cff")
process.puJetMva.jets = cms.InputTag("goodPatJets")
process.puJetId.jets = cms.InputTag("goodPatJets")
process.puJetMvaSmeared = process.puJetMva.clone()
process.puJetIdSmeared = process.puJetId.clone()
process.puJetMvaResUp = process.puJetMva.clone()
process.puJetIdResUp = process.puJetId.clone()
process.puJetMvaResDown = process.puJetMva.clone()
process.puJetIdResDown = process.puJetId.clone()
process.puJetMvaEnUp = process.puJetMva.clone()
process.puJetIdEnUp = process.puJetId.clone()
process.puJetMvaEnDown = process.puJetMva.clone()
process.puJetIdEnDown = process.puJetId.clone()
process.puJetIdSmeared.jets = cms.InputTag("smearedGoodPatJetsWithGaussian")
process.puJetMvaSmeared.jetids = cms.InputTag("puJetIdSmeared")
process.puJetMvaSmeared.jets = cms.InputTag("smearedGoodPatJetsWithGaussian")
process.puJetIdResUp.jets = cms.InputTag("smearedGoodPatJetsResUpWithGaussian")
process.puJetMvaResUp.jetids = cms.InputTag("puJetIdResUp")
process.puJetMvaResUp.jets = cms.InputTag("smearedGoodPatJetsResUpWithGaussian")
process.puJetIdResDown.jets = cms.InputTag("smearedGoodPatJetsResDownWithGaussian")
process.puJetMvaResDown.jetids = cms.InputTag("puJetIdResDown")
process.puJetMvaResDown.jets = cms.InputTag("smearedGoodPatJetsResDownWithGaussian")
process.puJetIdEnUp.jets = cms.InputTag("shiftedGoodPatJetsEnUpForCorrMEtWithGaussian")
process.puJetMvaEnUp.jetids = cms.InputTag("puJetIdEnUp")
process.puJetMvaEnUp.jets = cms.InputTag("shiftedGoodPatJetsEnUpForCorrMEtWithGaussian")
process.puJetIdEnDown.jets = cms.InputTag("shiftedGoodPatJetsEnDownForCorrMEtWithGaussian")
process.puJetMvaEnDown.jetids = cms.InputTag("puJetIdEnDown")
process.puJetMvaEnDown.jets = cms.InputTag("shiftedGoodPatJetsEnDownForCorrMEtWithGaussian")
# For jet without Gaussian smearing collection
process.puJetMvaSmearedNoGaussian = process.puJetMva.clone()
process.puJetIdSmearedNoGaussian = process.puJetId.clone()
process.puJetMvaResUpNoGaussian = process.puJetMva.clone()
process.puJetIdResUpNoGaussian = process.puJetId.clone()
process.puJetMvaResDownNoGaussian = process.puJetMva.clone()
process.puJetIdResDownNoGaussian = process.puJetId.clone()
process.puJetMvaEnUpNoGaussian = process.puJetMva.clone()
process.puJetIdEnUpNoGaussian = process.puJetId.clone()
process.puJetMvaEnDownNoGaussian = process.puJetMva.clone()
process.puJetIdEnDownNoGaussian = process.puJetId.clone()
process.puJetIdSmearedNoGaussian.jets = cms.InputTag("smearedGoodPatJetsNoGaussian")
process.puJetMvaSmearedNoGaussian.jetids = cms.InputTag("puJetIdSmearedNoGaussian")
process.puJetMvaSmearedNoGaussian.jets = cms.InputTag("smearedGoodPatJetsNoGaussian")
process.puJetIdResUpNoGaussian.jets = cms.InputTag("smearedGoodPatJetsResUpNoGaussian")
process.puJetMvaResUpNoGaussian.jetids = cms.InputTag("puJetIdResUpNoGaussian")
process.puJetMvaResUpNoGaussian.jets = cms.InputTag("smearedGoodPatJetsResUpNoGaussian")
process.puJetIdResDownNoGaussian.jets = cms.InputTag("smearedGoodPatJetsResDownNoGaussian")
process.puJetMvaResDownNoGaussian.jetids = cms.InputTag("puJetIdResDownNoGaussian")
process.puJetMvaResDownNoGaussian.jets = cms.InputTag("smearedGoodPatJetsResDownNoGaussian")
process.puJetIdEnUpNoGaussian.jets = cms.InputTag("shiftedGoodPatJetsEnUpForCorrMEtNoGaussian")
process.puJetMvaEnUpNoGaussian.jetids = cms.InputTag("puJetIdEnUpNoGaussian")
process.puJetMvaEnUpNoGaussian.jets = cms.InputTag("shiftedGoodPatJetsEnUpForCorrMEtNoGaussian")
process.puJetIdEnDownNoGaussian.jets = cms.InputTag("shiftedGoodPatJetsEnDownForCorrMEtNoGaussian")
process.puJetMvaEnDownNoGaussian.jetids = cms.InputTag("puJetIdEnDownNoGaussian")
process.puJetMvaEnDownNoGaussian.jets = cms.InputTag("shiftedGoodPatJetsEnDownForCorrMEtNoGaussian")
###--------------------------------------------------------------
###--------------------------------------------------------------
### MET
# Apply type 0 MET corrections based on PFCandidate
process.load("JetMETCorrections.Type1MET.pfMETCorrectionType0_cfi")
process.pfType1CorrectedMet.applyType0Corrections = cms.bool(False)
process.pfType1CorrectedMet.srcType1Corrections = cms.VInputTag(
cms.InputTag('pfMETcorrType0'),
cms.InputTag('pfJetMETcorr', 'type1')
)
# Get loose ID/Iso muons and veto ID electrons
process.load("InvisibleHiggs.Ntuple.PhysicsObjectCandidates_cff")
# Get PFMET from runMEtUncertainties
from PhysicsTools.PatUtils.tools.metUncertaintyTools import runMEtUncertainties
process.load("JetMETCorrections.Type1MET.pfMETsysShiftCorrections_cfi")
if iRunOnData == True:
runMEtUncertainties(process,
electronCollection = cms.InputTag('selectVetoElectrons'),
photonCollection = '',
muonCollection = 'selectLooseMuons',
tauCollection = '',
jetCollection = cms.InputTag('goodPatJets'),
jetCorrLabel = 'L2L3Residual',
doSmearJets = False,
makeType1corrPFMEt = True,
makeType1p2corrPFMEt = False,
makePFMEtByMVA = False,
makeNoPileUpPFMEt = False,
doApplyType0corr = True,
sysShiftCorrParameter = process.pfMEtSysShiftCorrParameters_2012runAvsNvtx_data,
doApplySysShiftCorr = False,
addToPatDefaultSequence = False,
postfix = ''
)
process.patPFJetMETtype1p2Corr.jetCorrLabel = cms.string('L2L3Residual')
process.patPFJetMETtype2Corr.jetCorrLabel = cms.string('L2L3Residual')
else:
runMEtUncertainties(process,
electronCollection = cms.InputTag('selectVetoElectrons'),
photonCollection = '',
muonCollection = 'selectLooseMuons',
tauCollection = '',
jetCollection = cms.InputTag('goodPatJets'),
jetCorrLabel = 'L3Absolute',
doSmearJets = True,
makeType1corrPFMEt = True,
makeType1p2corrPFMEt = False,
makePFMEtByMVA = False,
makeNoPileUpPFMEt = False,
doApplyType0corr = True,
sysShiftCorrParameter = process.pfMEtSysShiftCorrParameters_2012runAvsNvtx_mc,
doApplySysShiftCorr = False,
addToPatDefaultSequence = False,
postfix = 'WithGaussian'
)
runMEtUncertainties(process,
electronCollection = cms.InputTag('selectVetoElectrons'),
photonCollection = '',
muonCollection = 'selectLooseMuons',
tauCollection = '',
jetCollection = cms.InputTag('goodPatJets'),
jetCorrLabel = 'L3Absolute',
doSmearJets = True,
makeType1corrPFMEt = True,
makeType1p2corrPFMEt = False,
makePFMEtByMVA = False,
makeNoPileUpPFMEt = False,
doApplyType0corr = True,
sysShiftCorrParameter = process.pfMEtSysShiftCorrParameters_2012runAvsNvtx_mc,
doApplySysShiftCorr = False,
addToPatDefaultSequence = False,
postfix = 'NoGaussian'
)
# Turn off gaussian smearing
process.smearedGoodPatJetsNoGaussian.doGaussian = cms.int32(0)
process.smearedGoodPatJetsResUpNoGaussian.doGaussian = cms.int32(0)
process.smearedGoodPatJetsResDownNoGaussian.doGaussian = cms.int32(0)
# Fix Type0 correction module
process.patPFMETtype0Corr.correction.par3 = cms.double(0.909209)
process.patPFMETtype0Corr.correction.par2 = cms.double(0.0303531)
process.patPFMETtype0Corr.correction.par1 = cms.double(-0.703151)
process.patPFMETtype0Corr.correction.par0 = cms.double(0.0)
###--------------------------------------------------------------
# PAT/ntuples one step
# Z and W candidates
process.load('InvisibleHiggs/Ntuple/WCandidates_cff')
process.load('InvisibleHiggs/Ntuple/ZCandidates_cff')
# Ntuple producer
process.load('InvisibleHiggs/Ntuple/invHiggsInfo_cfi')
if iRunOnData == False:
# Jet/MET uncertainty
process.invHiggsInfo.jetTag = cms.untracked.InputTag("smearedGoodPatJetsWithGaussian")
process.invHiggsInfo.metTag = cms.untracked.InputTag("patType1CorrectedPFMetWithGaussian")
process.invHiggsInfo.puJetMvaTag = cms.untracked.InputTag("puJetMvaSmeared", "fullDiscriminant")
process.invHiggsInfo.puJetIdTag = cms.untracked.InputTag("puJetMvaSmeared", "fullId")
# PU re-weighting
process.invHiggsInfo.puMCFile = cms.untracked.string("PUHistS10.root")
process.invHiggsInfo.puDataFile = cms.untracked.string("PUHistRun2012All_forV9.root")
process.invHiggsInfo.puMCHist = cms.untracked.string("pileup")
process.invHiggsInfo.puDataHist = cms.untracked.string("pileup")
process.invHiggsInfo.mcPYTHIA = cms.untracked.bool(True)
process.invHiggsInfo.trigCorrFile = cms.untracked.string("DataMCWeight_53X_v1.root")
process.invHiggsInfo.leptCorrFile = cms.untracked.string("leptonWeights.root")
# TTree output file
process.load("CommonTools.UtilAlgos.TFileService_cfi")
process.TFileService.fileName = cms.string('invHiggsInfo_MC.root')
###--------------------------------------------------------------
###--------------------------------------------------------------
### Tau
# removeSpecificPATObjects( process, ['Taus'] )
# process.patDefaultSequence.remove( process.patTaus )
process.load("RecoTauTag.Configuration.RecoPFTauTag_cff")
###--------------------------------------------------------------
###--------------------------------------------------------------
### Trigger matching
# from PhysicsTools.PatAlgos.tools.trigTools import *
# process.metTriggerMatch = cms.EDProducer(
# "PATTriggerMatcherDRLessByR" # match by DeltaR only, best match by DeltaR
# , src = cms.InputTag( 'patMETs' )
# , matched = cms.InputTag( 'patTrigger' ) # default producer label as defined in PhysicsTools/PatAlgos/python/triggerLayer1/triggerProducer_cfi.py
# , matchedCuts = cms.string( 'path( "HLT_MET100_v*" )' )
# , maxDPtRel = cms.double( 0.5 )
# , maxDeltaR = cms.double( 0.5 )
# , resolveAmbiguities = cms.bool( True ) # only one match per trigger object
# , resolveByMatchQuality = cms.bool( True ) # take best match found per reco object: by DeltaR here (s. above)
# )
# process.jetTriggerMatch = cms.EDProducer(
# "PATTriggerMatcherDRLessByR" # match by DeltaR only, best match by DeltaR
# , src = cms.InputTag( 'patJets' )
# , matched = cms.InputTag( 'patTrigger' ) # default producer label as defined in PhysicsTools/PatAlgos/python/triggerLayer1/triggerProducer_cfi.py
# , matchedCuts = cms.string( 'path( "HLT_Jet30_v*" )' )
# , maxDPtRel = cms.double( 0.5 )
# , maxDeltaR = cms.double( 0.5 )
# , resolveAmbiguities = cms.bool( True ) # only one match per trigger object
# , resolveByMatchQuality = cms.bool( True ) # take best match found per reco object: by DeltaR here (s. above)
# )
# switchOnTriggerMatchEmbedding( process, [ 'metTriggerMatch', 'jetTriggerMatch' ] )
###--------------------------------------------------------------
###--------------------------------------------------------------
### Paths
process.p0 = cms.Path( process.HBHENoiseFilter )
process.p1 = cms.Path( process.CSCTightHaloFilter )
process.p2 = cms.Path( process.hcalLaserEventFilter )
process.p3 = cms.Path( process.EcalDeadCellTriggerPrimitiveFilter )
process.p4 = cms.Path( process.eeBadScFilter )
process.p5 = cms.Path( process.ecalLaserCorrFilter )
process.p6 = cms.Path( process.goodVertices * process.trackingFailureFilter )
process.p7 = cms.Path( process.trkPOGFilters )
process.p8 = cms.Path( process.hcallLaserEvent2012Filter )
if iRunOnData == True:
process.p = cms.Path(
# Trigger filter
process.hltHighLevel *
# Basic filters
process.noscraping *
process.primaryVertexFilter *
# MET filters (Move to be flags)
# MET Correction
process.type0PFMEtCorrection *
# Tau
process.recoTauClassicHPSSequence *
# Generate PAT
process.pfParticleSelectionSequence *
process.patDefaultSequence *
process.goodPatJets *
process.PhysicsObjectSequence *
process.metUncertaintySequence *
process.puJetIdSqeuence *
process.WSequence *
process.ZSequence *
process.invHiggsInfo
)
else:
process.p = cms.Path(
# Trigger filter
process.hltHighLevel *
# Basic filters
process.noscraping *
process.primaryVertexFilter *
# MET filters (Move to be flags)
# MET Correction
process.type0PFMEtCorrection *
# Tau
process.recoTauClassicHPSSequence *
# Generate PAT
process.pfParticleSelectionSequence *
process.genParticlesForJetsNoNu *
process.ak5GenJetsNoNu *
process.patDefaultSequence *
process.goodPatJets *
process.PhysicsObjectSequence *
process.metUncertaintySequenceWithGaussian *
process.metUncertaintySequenceNoGaussian *
process.puJetIdSqeuence *
process.puJetIdSmeared *
process.puJetMvaSmeared *
process.puJetIdResUp *
process.puJetMvaResUp *
process.puJetIdResDown *
process.puJetMvaResDown *
process.puJetIdEnUp *
process.puJetMvaEnUp *
process.puJetIdEnDown *
process.puJetMvaEnDown *
process.puJetIdSmearedNoGaussian *
process.puJetMvaSmearedNoGaussian *
process.puJetIdResUpNoGaussian *
process.puJetMvaResUpNoGaussian *
process.puJetIdResDownNoGaussian *
process.puJetMvaResDownNoGaussian *
process.puJetIdEnUpNoGaussian *
process.puJetMvaEnUpNoGaussian *
process.puJetIdEnDownNoGaussian *
process.puJetMvaEnDownNoGaussian *
process.WSequence *
process.ZSequence *
process.invHiggsInfo
)
###--------------------------------------------------------------
###--------------------------------------------------------------
### Output
process.out.outputCommands += [
# trigger results
'keep edmTriggerResults_*_*_*'
,'keep *_hltTriggerSummaryAOD_*_*'
# L1
,'keep *_l1extraParticles_MET_RECO'
,'keep *_l1extraParticles_MHT_RECO'
# good jets
,'keep *_goodPatJets_*_*'
# PU jet ID
,'keep *_puJetId*_*_*'
,'keep *_puJetMva*_*_*'
# vertices
,'keep *_offlineBeamSpot_*_*'
,'keep *_offlinePrimaryVertices*_*_*'
,'keep *_goodOfflinePrimaryVertices*_*_*'
,'keep double_*_rho_*'
]
if iRunOnData == False:
process.out.outputCommands += ['keep GenEventInfoProduct_*_*_*'
,'keep recoGenParticles_*_*_*'
,'keep GenMETs_*_*_*'
,'keep *_addPileupInfo_*_*'
,'keep LHEEventProduct_*_*_*'
,'keep ak5GenJets_*_*_*'
,'keep ak5GenJetsNoNu_*_*_*'
]
process.out.fileName = 'patTuple.root'
del(process.out)
del(process.outpath)
def createProcess(runOnMC, runCHS, correctMETWithT1, processCaloJets, globalTag):
## import skeleton process
from PhysicsTools.PatAlgos.patTemplate_cfg import process
# load the PAT config
process.load("PhysicsTools.PatAlgos.patSequences_cff")
process.load("JetMETCorrections.Configuration.JetCorrectionProducers_cff")
# Do some CHS stuff
process.ak5PFchsL1Fastjet = process.ak5PFL1Fastjet.clone(algorithm = 'AK5PFchs')
process.ak5PFchsL2Relative = process.ak5PFL2Relative.clone(algorithm = 'AK5PFchs')
process.ak5PFchsL3Absolute = process.ak5PFL3Absolute.clone(algorithm = 'AK5PFchs')
process.ak5PFchsResidual = process.ak5PFResidual.clone(algorithm = 'AK5PFchs')
process.ak5PFchsL1FastL2L3 = cms.ESProducer(
'JetCorrectionESChain',
correctors = cms.vstring('ak5PFchsL1Fastjet', 'ak5PFchsL2Relative','ak5PFchsL3Absolute')
)
from PhysicsTools.SelectorUtils.pvSelector_cfi import pvSelector
## The good primary vertex filter ____________________________________________||
## This filter throw events with no primary vertex
process.primaryVertexFilter = cms.EDFilter(
"VertexSelector",
src = cms.InputTag("offlinePrimaryVertices"),
cut = cms.string("!isFake && ndof > 4 && abs(z) <= 24 && position.Rho <= 2"),
filter = cms.bool(True)
)
process.goodOfflinePrimaryVertices = cms.EDFilter("PrimaryVertexObjectFilter",
filterParams = pvSelector.clone( minNdof = cms.double(4.0), maxZ = cms.double(24.0) ),
src = cms.InputTag('offlinePrimaryVertices')
)
# Configure PAT to use PF2PAT instead of AOD sources
# this function will modify the PAT sequences.
from PhysicsTools.PatAlgos.tools.coreTools import removeSpecificPATObjects, removeMCMatching
from PhysicsTools.PatAlgos.tools.pfTools import usePF2PAT, adaptPFIsoElectrons, adaptPVs, usePFIso
#from PhysicsTools.PatAlgos.tools.metTools import *
def usePF2PATForAnalysis(jetAlgo, postfix, useTypeIMET, usePFNoPU):
# Jet corrections
# No L2L3 Residual on purpose
if usePFNoPU:
jetCorrections = ("%sPFchs" % algo, ['L1FastJet', 'L2Relative', 'L3Absolute'])
postfix += "chs"
else:
jetCorrections = ("%sPF" % algo, ['L1FastJet', 'L2Relative', 'L3Absolute'])
#if not runOnMC:
# jetCorrections[1].append('L2L3Residual')
p = postfix
usePF2PAT(process, runPF2PAT=True, jetAlgo=jetAlgo, runOnMC=runOnMC, postfix=p, jetCorrections=jetCorrections, typeIMetCorrections = useTypeIMET)
getattr(process, "pfPileUp" + p).Enable = True
getattr(process, "pfPileUp" + p).Vertices = 'goodOfflinePrimaryVertices'
getattr(process, "pfPileUp" + p).checkClosestZVertex = cms.bool(False)
getattr(process, "pfJets" + p).doAreaFastjet = cms.bool(True)
getattr(process, "pfJets" + p).doRhoFastjet = False
getattr(process, 'patJetCorrFactors' + p).rho = cms.InputTag("kt6PFJets", "rho") # Do not use kt6PFJetsPFlowAK5, it's not ok for L1FastJet.
# top projections in PF2PAT:
getattr(process,"pfNoPileUp" + p).enable = cms.bool(usePFNoPU)
getattr(process,"pfNoMuon" + p).enable = True
getattr(process,"pfNoElectron" + p).enable = True
getattr(process,"pfNoTau" + p).enable = True
getattr(process,"pfNoJet" + p).enable = True
getattr(process,"patElectrons" + p).embedTrack = True
getattr(process,"patMuons" + p).embedTrack = True
# enable delta beta correction for muon selection in PF2PAT?
getattr(process,"pfIsolatedMuons" + p).doDeltaBetaCorrection = True
getattr(process, "patJets" + p).embedPFCandidates = False
# Keep only jets with pt > 2 Gev
getattr(process, "selectedPatJets" + p).cut = "pt > 2";
# Use a cone of 0.3 for photon isolation
#adaptPFIsoPhotons(process, applyPostfix(process, "patPhotons", postfix), postfix, "03")
# 2012 Photon ID
# Electron conversion
setattr(process, "patConversions" + p, cms.EDProducer("PATConversionProducer",
# input collection
electronSource = cms.InputTag("selectedPatElectrons" + p)
))
# Switch electron isolation to dR = 0.3, for PF2PAT
getattr(process, "pfIsolatedElectrons" + p).isolationValueMapsCharged = cms.VInputTag(cms.InputTag("elPFIsoValueCharged03PFId" + p))
getattr(process, "pfIsolatedElectrons" + p).deltaBetaIsolationValueMap = cms.InputTag("elPFIsoValuePU03PFId" + p)
getattr(process, "pfIsolatedElectrons" + p).isolationValueMapsNeutral = cms.VInputTag(cms.InputTag("elPFIsoValueNeutral03PFId" + p), cms.InputTag("elPFIsoValueGamma03PFId" + p))
getattr(process, "pfElectrons" + p).isolationValueMapsCharged = cms.VInputTag(cms.InputTag("elPFIsoValueCharged03PFId" + p))
getattr(process, "pfElectrons" + p).deltaBetaIsolationValueMap = cms.InputTag("elPFIsoValuePU03PFId" + p)
getattr(process, "pfElectrons" + p).isolationValueMapsNeutral = cms.VInputTag(cms.InputTag( "elPFIsoValueNeutral03PFId" + p), cms.InputTag("elPFIsoValueGamma03PFId" + p))
# ... And for PAT
adaptPFIsoElectrons(process, getattr(process, "pfElectrons" + p), p, "03")
##there used to be a modulo to keep track of muons gen info, doesnt work anymore and we don't use that info - so removed for now.
setattr(process, "patMuonsLoose" + p, getattr(process, "patMuons" + p).clone(
pfMuonSource = cms.InputTag("pfMuons" + p),
embedGenMatch = False,
addGenMatch = False
)
)
setattr(process, "selectedPatMuonsLoose" + p, getattr(process, "selectedPatMuons" + p).clone(
src = cms.InputTag("patMuonsLoose" + p)
)
)
sequence = getattr(process, "patDefaultSequence" + p)
sequence += getattr(process, "patMuonsLoose" + p)
sequence += (getattr(process, "selectedPatMuonsLoose" + p))
setattr(process, "patElectronsLoose" + p, getattr(process, "patElectrons" + p).clone(
pfElectronSource = cms.InputTag("pfElectrons" + p)
)
)
setattr(process, "selectedPatElectronsLoose" + p, getattr(process, "selectedPatElectrons" + p).clone(
src = cms.InputTag("patElectronsLoose" + p)
)
)
adaptPFIsoElectrons(process, getattr(process, "patElectronsLoose" + p), postfix, "03")
sequence = getattr(process, "patDefaultSequence" + p)
sequence += (getattr(process, "patElectronsLoose" + p) * getattr(process, "selectedPatElectronsLoose" + p))
# Setup quark gluon tagger
#process.load('QuarkGluonTagger.EightTeV.QGTagger_RecoJets_cff')
#cloneProcessingSnippet(process, process.QuarkGluonTagger, p)
#getattr(process, "QGTagger" + p).srcJets = cms.InputTag("selectedPatJets" + p)
#getattr(process, "QGTagger" + p).isPatJet = cms.untracked.bool(True)
#getattr(process, "QGTagger" + p).useCHS = cms.untracked.bool(usePFNoPU)
## Remove the processing of primary vertices, as it's already what we do here
#getattr(process, 'QGTagger' + p).srcPV = cms.InputTag('goodOfflinePrimaryVertices')
#getattr(process, 'QuarkGluonTagger' + p).remove(getattr(process, 'goodOfflinePrimaryVerticesQG' + p))
if not runOnMC:
if 'L2L3Residual' in jetCorrections:
getattr(process, 'patPFJetMETtype1p2Corr' + p).jetCorrLabel = 'L2L3Residual'
getattr(process, 'patPFMet' + p).addGenMET = cms.bool(False)
names = ["Taus"]
#if jetAlgo != "AK5":
#names += ["Electrons", "Muons"]
if len(names) > 0:
removeSpecificPATObjects(process, names = names, outputModules = ['out'], postfix = p)
adaptPVs(process, pvCollection = cms.InputTag("goodOfflinePrimaryVertices"), postfix = p)
getattr(process, "patDefaultSequence" + p).replace(getattr(process, "selectedPatElectrons" + p), getattr(process, "selectedPatElectrons" + p) + getattr(process, "patConversions" + p))
#getattr(process, "patDefaultSequence" + p).replace(getattr(process, "selectedPatJets" + p), getattr(process, "selectedPatJets" + p) + getattr(process, "QuarkGluonTagger" + p))
return getattr(process, "patPF2PATSequence" + p)
if correctMETWithT1:
process.load("PhysicsTools.PatUtils.patPFMETCorrections_cff")
from PhysicsTools.PatAlgos.tools.helpers import cloneProcessingSnippet
print "##########################"
print "PF jets with PF2PAT"
print "Using Type I met" if correctMETWithT1 else "NOT using Type I met"
print "##########################"
#runCHS = False
#postfixes = {'PFlowAK5': 'AK5', 'PFlowAK7': 'AK7'}
postfixes = {'PFlowAK5': 'AK5'}
# Setup quark gluon tagger
process.load('QuarkGluonTagger.EightTeV.QGTagger_RecoJets_cff')
process.sequence_chs = cms.Sequence()
process.sequence_nochs = cms.Sequence()
for p, algo in postfixes.items():
process.sequence_nochs += usePF2PATForAnalysis(jetAlgo=algo, postfix=p, usePFNoPU=False, useTypeIMET=correctMETWithT1)
if runCHS:
process.sequence_chs += usePF2PATForAnalysis(jetAlgo=algo, postfix=p, usePFNoPU=True, useTypeIMET=correctMETWithT1)
setattr(process, 'QGTagger' + p, process.QGTagger.clone())
getattr(process, "QGTagger" + p).srcJets = cms.InputTag("selectedPatJets" + p)
getattr(process, "QGTagger" + p).isPatJet = cms.untracked.bool(True)
getattr(process, "QGTagger" + p).useCHS = cms.untracked.bool(False)
process.QuarkGluonTagger.replace(process.QGTagger, getattr(process, 'QGTagger' + p))
if runCHS:
chsP = p + "chs"
setattr(process, 'QGTagger' + chsP, process.QGTagger.clone())
getattr(process, "QGTagger" + chsP).srcJets = cms.InputTag("selectedPatJets" + chsP)
getattr(process, "QGTagger" + chsP).isPatJet = cms.untracked.bool(True)
getattr(process, "QGTagger" + chsP).useCHS = cms.untracked.bool(True)
process.QuarkGluonTagger.replace(getattr(process, 'QGTagger' + p), getattr(process, 'QGTagger' + p) + getattr(process, 'QGTagger' + chsP))
print "##########################"
print "Calo jets" if processCaloJets else "No processing of calo jets"
print "##########################"
usePFIso(process, "")
#adaptPFIsoPhotons(process, process.patPhotons, "", "03")
if processCaloJets:
# No L2L3 Residual on purpose
jetCorrections = ('AK5Calo', ['L1Offset', 'L2Relative', 'L3Absolute'])
addJetCollection(process, cms.InputTag('ak7CaloJets'),
'AK7',
'Calo',
doJTA = True,
doBTagging = True,
jetCorrLabel = jetCorrections,
doType1MET = correctMETWithT1,
doL1Cleaning = False,
doL1Counters = False,
genJetCollection = cms.InputTag("ak7GenJets"),
doJetID = True,
jetIdLabel = "ak7"
)
switchJetCollection(process, cms.InputTag('ak5CaloJets'),
doJTA = True,
doBTagging = True,
jetCorrLabel = jetCorrections,
doType1MET = correctMETWithT1,
genJetCollection = cms.InputTag("ak5GenJets"),
doJetID = True,
jetIdLabel = "ak5"
)
process.selectedPatJets.cut = "pt > 2"
process.selectedPatJetsAK7Calo.cut = "pt > 2"
else:
removeSpecificPATObjects(process, names = ['Jets', 'METs'])
if not runOnMC:
# Remove MC Matching
removeMCMatching(process, names = ["All"])
removeSpecificPATObjects(process, names = ['Electrons', 'Muons', 'Taus'])
if runCHS:
print "##########################"
print "Running CHS sequence"
print "##########################"
process.analysisSequence = cms.Sequence()
process.analysisSequence *= process.sequence_nochs
if runCHS:
process.analysisSequence *= process.sequence_chs
# Quark Gluon tagging
process.analysisSequence *= process.QuarkGluonTagger
# Add default pat sequence to our path
# This brings to life TcMET, Calo jets and Photons
process.analysisSequence *= process.patDefaultSequence
# Add our PhotonIsolationProducer to the analysisSequence. This producer compute pf isolations
# for our photons
process.photonPFIsolation = cms.EDProducer("PhotonIsolationProducer",
src = cms.InputTag("selectedPatPhotons")
)
process.analysisSequence *= process.photonPFIsolation
# Filtering
# require physics declared
process.load('HLTrigger.special.hltPhysicsDeclared_cfi')
process.hltPhysicsDeclared.L1GtReadoutRecordTag = 'gtDigis'
# require scraping filter
process.scrapingVeto = cms.EDFilter("FilterOutScraping",
applyfilter = cms.untracked.bool(True),
debugOn = cms.untracked.bool(False),
numtrack = cms.untracked.uint32(10),
thresh = cms.untracked.double(0.25)
)
# Count events
process.nEventsTotal = cms.EDProducer("EventCountProducer")
process.nEventsFiltered = cms.EDProducer("EventCountProducer")
# MET Filters
process.load("RecoMET.METFilters.metFilters_cff")
# HCAL Laser filter : work only on Winter13 rereco
process.load("EventFilter.HcalRawToDigi.hcallaserFilterFromTriggerResult_cff")
#needed fot photon energy regression calculation
process.load('Calibration.EleNewEnergiesProducer.elenewenergiesproducer_cfi')
#getattr(process,"patPhotons" + p)
process.patPhotons.userData.userFloats.src = [
cms.InputTag("eleNewEnergiesProducer","energySCEleJoshPhoSemiParamV5ecorr")
]
## uncomment to run interactive
## process.eleNewEnergiesProducer.regrPhoJoshV5_SemiParamFile = cms.string('../../../../src/HiggsAnalysis/GBRLikelihoodEGTools/data/regweights_v5_forest_ph.root')
## process.eleNewEnergiesProducer.regrEleJoshV5_SemiParamFile = cms.string('../../../../src/HiggsAnalysis/GBRLikelihoodEGTools/data/regweights_v5_forest_ele.root')
process.eleNewEnergiesProducer.electronCollection = getattr(process,"patPhotons" + p).photonSource
# Let it run
process.p = cms.Path(
process.nEventsTotal +
# Filters
process.hcalfilter +
process.primaryVertexFilter +
process.scrapingVeto +
process.metFilters +
process.goodOfflinePrimaryVertices +
# photon energy regression
process.eleNewEnergiesProducer +
# Physics
process.analysisSequence +
process.nEventsFiltered
)
if runOnMC:
process.p.remove(process.hcalfilter)
process.p.remove(process.scrapingVeto)
# Add PF2PAT output to the created file
from PhysicsTools.PatAlgos.patEventContent_cff import patEventContentNoCleaning
#process.load("CommonTools.ParticleFlow.PF2PAT_EventContent_cff")
process.out.outputCommands = cms.untracked.vstring('drop *',
'keep *_photonCore_*_*',
'keep double_kt6*Jets*_rho_*',
'keep *_goodOfflinePrimaryVertices_*_*',
'keep recoPFCandidates_particleFlow_*_*',
# Content of *patEventContentNoCleaning
'keep *_selectedPatPhotons*_*_*', 'keep *_selectedPatElectrons*_*_*', 'keep *_selectedPatMuons*_*_*', 'keep *_selectedPatTaus*_*_*', 'keep *_selectedPatJets*_*_*', 'drop *_selectedPatJets_pfCandidates_*', 'drop *_*PF_caloTowers_*', 'drop *_*JPT_pfCandidates_*', 'drop *_*Calo_pfCandidates_*', 'keep *_patMETs*_*_*', 'keep *_selectedPatPFParticles*_*_*', 'keep *_selectedPatTrackCands*_*_*',
'keep *_cleanPatPhotons*_*_*', 'keep *_cleanPatElectrons*_*_*', 'keep *_cleanPatMuons*_*_*', 'keep *_cleanPatTaus*_*_*',
'keep *_cleanPatJets*_*_*', 'keep *_cleanPatHemispheres*_*_*', 'keep *_cleanPatPFParticles*_*_*',
'keep *_cleanPatTrackCands*_*_*',
'drop *_*PFlow_caloTowers_*',
# Type I residual
'drop *_selectedPatJetsForMET*_*_PAT',
'keep *_patPFMet*_*_PAT', # Keep raw met
# Trigger
'keep *_TriggerResults_*_HLT',
# Debug
#'keep *_pf*_*_PAT'
# Photon ID
'keep *_patConversions*_*_*',
'keep *_photonPFIsolation*_*_*',
# Quark Gluon tagging
'keep *_QGTagger*_*_*',
'drop *_kt6PFJetsIsoQG_*_PAT',
'drop *_kt6PFJetsQG_*_PAT',
# MC truth
'keep *_genParticles_*_*',
# RecHits
'keep *EcalRecHit*_*_*_*',
# Beam spot
'keep *_offlineBeamSpot_*_*',
#photon energy regression
'keep *_eleNewEnergiesProducer_*_*'
)
if runOnMC:
process.out.outputCommands.extend(['keep *_addPileupInfo_*_*', 'keep *_generator_*_*'])
# switch on PAT trigger
# from PhysicsTools.PatAlgos.tools.trigTools import switchOnTrigger
# switchOnTrigger( process )
## ------------------------------------------------------
# In addition you usually want to change the following
# parameters:
## ------------------------------------------------------
#
process.GlobalTag.globaltag = "%s::All" % (globalTag) ## (according to https://twiki.cern.ch/twiki/bin/view/CMS/SWGuideFrontierConditions)
# ##
#process.source.fileNames = cms.untracked.vstring('file:input_data.root') ## (e.g. 'file:AOD.root')
# ##
process.maxEvents.input = 2500
# ##
# process.out.outputCommands = [ ... ] ## (e.g. taken from PhysicsTools/PatAlgos/python/patEventContent_cff.py)
# ##
process.options.wantSummary = False ## (to suppress the long output at the end of the job)
process.MessageLogger.cerr.FwkReport.reportEvery = 1000
# Remove annoying ecalLaser messages
process.MessageLogger.suppressError = cms.untracked.vstring ('ecalLaserCorrFilter')
return process
def configurePatTuple(process, isMC=True, **kwargs):
# Stuff we always keep
output_commands = [
'*_addPileupInfo_*_*',
'edmMergeableCounter_*_*_*',
'*_lumiProducer_*_*',
'*_particleFlow_*_*',
'*_offlineBeamSpot_*_*',
'*_trackCandidates_*_*',
'*_gsfTrackCandidates_*_*',
#'*_generalTracks_*_*',
'*_electronGsfTracks_*_*',
'*_offlinePrimaryVertices*_*_*',
'*_ak5PFJets_*_*',
'*_ak5GenJets_*_*',
'*_hltTriggerSummaryAOD_*_*',
'edmTriggerResults_TriggerResults_*_%s' % process.name_(),
'*_MEtoEDMConverter*_*_%s' % process.name_(),
'LHEEventProduct_*_*_*',
'GenEventInfoProduct_generator_*_*',
'*_kt6PFJetsForRhoComputationVoronoi_rho_*',
'*_kt6PFJetsForIso_rho_*',
]
# Define our patTuple production sequence
process.tuplize = cms.Sequence()
# Only keep interesting genParticles
process.load("FinalStateAnalysis.RecoTools.genParticleTrimmer_cfi")
process.genParticles = process.prunedGenParticles.clone()
if isMC:
#process.tuplize += process.genParticles
#output_commands.append('*_genParticles_*_%s' % process.name_())
output_commands.append('*_genParticles_*_*')
output_commands.append('*_tauGenJetsSelectorAllHadrons_*_*')
output_commands.append('*_tauGenJets_*_*')
output_commands.append('*_ak5GenJets_*_*')
# Select vertices
process.load("FinalStateAnalysis.RecoTools.vertexSelection_cff")
output_commands.append('*_selectedPrimaryVertex_*_*')
output_commands.append('*_selectPrimaryVerticesQuality_*_*')
process.tuplize += process.selectPrimaryVertices
# Run the ZZ recipe for rho
from RecoJets.JetProducers.kt4PFJets_cfi import kt4PFJets \
as zzCantDoAnythingRight
process.kt6PFJetsForIso = zzCantDoAnythingRight.clone(
rParam = cms.double(0.6),
doAreaFastjet = cms.bool(True),
doRhoFastjet = cms.bool(True),
Rho_EtaMax = cms.double(2.5),
Ghost_EtaMax = cms.double(2.5),
)
process.tuplize += process.kt6PFJetsForIso
# Rerun tau-ID
process.load('Configuration/StandardSequences/Services_cff')
process.load('Configuration/StandardSequences/GeometryIdeal_cff')
process.load('Configuration/StandardSequences/MagneticField_cff')
process.load('Configuration/StandardSequences/FrontierConditions_GlobalTag_cff')
process.load("RecoTauTag.Configuration.RecoPFTauTag_cff")
# Optimization - remove PFTauTagInfo compatibility layer
process.recoTauClassicHPSSequence.remove(process.pfRecoTauTagInfoProducer)
assert(process.combinatoricRecoTaus.modifiers[3].name.value() == 'TTIworkaround')
del process.combinatoricRecoTaus.modifiers[3]
process.tuplize += process.recoTauClassicHPSSequence
## Run rho computation
#from RecoJets.Configuration.RecoPFJets_cff import kt6PFJets
#kt6PFJets.Rho_EtaMax = cms.double(2.5)
#kt6PFJets.doRhoFastjet = True
#process.kt6PFJets = kt6PFJets
#process.tuplize += process.kt6PFJets
# Run pat default sequence
process.load("PhysicsTools.PatAlgos.patSequences_cff")
# Embed PF Isolation in electrons & muons
pfTools.usePFIso(process)
# Custom veto cones
process.elPFIsoValuePU04PFIdPFIso.deposits.vetos = cms.vstring()
process.elPFIsoValueChargedAll04PFIdPFIso.deposits.vetos = cms.vstring(
'EcalBarrel:ConeVeto(0.01)','EcalEndcaps:ConeVeto(0.015)')
# Unembed junk
process.patMuons.embedCaloMETMuonCorrs = False
process.patMuons.embedTcMETMuonCorrs = False
process.patMuons.embedTrack = True
process.patMuons.pvSrc = cms.InputTag("selectedPrimaryVertex")
# Do extra electron ID
process.load("FinalStateAnalysis.PatTools.electrons.electronID_cff")
process.tuplize += process.recoElectronID
process.patElectrons.electronIDSources = process.electronIDSources
process.patElectrons.embedTrack = True
# Run EGamma electron energy calibration
process.load("EgammaCalibratedGsfElectrons.CalibratedElectronProducers.calibratedGsfElectrons_cfi")
process.RandomNumberGeneratorService.calibratedGsfElectrons = cms.PSet(
initialSeed = cms.untracked.uint32(1), # A frickin billion
engineName = cms.untracked.string('TRandom3')
)
process.calibratedGsfElectrons.inputDataset = kwargs['dataset']
process.calibratedGsfElectrons.isMC = bool(isMC)
process.calibratedGsfElectrons.isAOD = True
process.calibratedGsfElectrons.updateEnergyError = cms.bool(True)
# Run a sanity check on the calibration configuration.
from FinalStateAnalysis.PatTools.electrons.patElectronEmbedCalibratedGsf_cfi \
import validate_egamma_calib_config
validate_egamma_calib_config(process)
process.tuplize += process.calibratedGsfElectrons
# Keep the calibratedGsfElectrons - we embed refs to this into the
# pat::Electrons
output_commands.append('*_calibratedGsfElectrons_*_*')
# Now run PAT
process.tuplize += process.patDefaultSequence
# Use HPS taus
tautools.switchToPFTauHPS(process)
# Disable tau IsoDeposits
process.patDefaultSequence.remove(process.patPFTauIsolation)
process.patTaus.isoDeposits = cms.PSet()
process.patTaus.userIsolation = cms.PSet()
# Disable gen match embedding - we keep it in the ntuple
process.patMuons.embedGenMatch = False
process.patElectrons.embedGenMatch = False
process.patTaus.embedGenMatch = False
process.patTaus.embedGenJetMatch = False
# Use PFJets and turn on JEC
jec = [ 'L1FastJet', 'L2Relative', 'L3Absolute' ]
if not isMC:
jec.extend([ 'L2L3Residual' ])
# Use AK5 PFJets
jettools.switchJetCollection(process,
cms.InputTag('ak5PFJets'),
doJTA = False,
doBTagging = True,
jetCorrLabel = ('AK5PF', jec),
#jetCorrLabel = None,
doType1MET = False,
doJetID = True,
genJetCollection = cms.InputTag("ak5GenJets"))
process.patJets.embedPFCandidates = False
process.patJets.embedCaloTowers = False
process.patJets.embedGenJetMatch = False
process.patJets.addAssociatedTracks = False
process.patJets.embedGenPartonMatch = False
process.patJetCorrFactors.useRho = True
# Let's use the same rho as in the TauID, so we don't need to do it twice.
process.patJetCorrFactors.rho = cms.InputTag(
"kt6PFJetsForRhoComputationVoronoi", "rho")
# Use PFMEt
mettools.addPfMET(process)
if not isMC:
coreTools.runOnData(process)
process.patMETsPF.addGenMET = False
output_commands.append('patJets_selectedPatJets_*_*')
# Customize/embed all our sequences
process.load("FinalStateAnalysis.PatTools.patJetProduction_cff")
# We have to keep all jets (for the MVA MET...)
process.patJetGarbageRemoval.cut = 'pt > 0'
final_jet_collection = chain_sequence(
process.customizeJetSequence, "patJets")
process.customizeJetSequence.insert(0, process.patJets)
# Make it a "complete" sequence
process.customizeJetSequence += process.selectedPatJets
# We can't mess up the selected pat jets because the taus use them.
process.selectedPatJets.src = final_jet_collection
process.patDefaultSequence.replace(process.patJets,
process.customizeJetSequence)
# Produce the electron collections
process.load("FinalStateAnalysis.PatTools.patElectronProduction_cff")
final_electron_collection = chain_sequence(
process.customizeElectronSequence, "selectedPatElectrons")
process.tuplize += process.customizeElectronSequence
process.customizeElectronSequence.insert(0, process.selectedPatElectrons)
process.patDefaultSequence.replace(process.selectedPatElectrons,
process.customizeElectronSequence)
# We have to do the pat Jets before the pat electrons since we embed them
process.customizeElectronSequence.insert(0, process.selectedPatJets)
process.cleanPatElectrons.src = final_electron_collection
# The "effective area" calculation needs to know if it is data/mc, etc.
process.patElectronMVAIsoEmbedding.target = kwargs['target']
process.patElectronEffectiveAreaEmbedder.target = kwargs['target']
process.load("FinalStateAnalysis.PatTools.patMuonProduction_cff")
final_muon_collection = chain_sequence(
process.customizeMuonSequence, "selectedPatMuons")
process.customizeMuonSequence.insert(0, process.selectedPatMuons)
process.patDefaultSequence.replace(process.selectedPatMuons,
process.customizeMuonSequence)
process.cleanPatMuons.src = final_muon_collection
# The "effective area" calculation needs to know if it is data/mc, etc.
process.patMuonMVAIdIsoEmbedding.target = kwargs['target']
process.patMuonEffectiveAreaEmbedder.target = kwargs['target']
process.load("FinalStateAnalysis.PatTools.patTauProduction_cff")
final_tau_collection = chain_sequence(
process.customizeTauSequence, "selectedPatTaus")
# Inject into the pat sequence
process.customizeTauSequence.insert(0, process.selectedPatTaus)
process.patDefaultSequence.replace(process.selectedPatTaus,
process.customizeTauSequence)
process.cleanPatTaus.src = final_tau_collection
# Remove muons and electrons
process.cleanPatTaus.checkOverlaps.muons.requireNoOverlaps = False
process.cleanPatTaus.checkOverlaps.electrons.requireNoOverlaps = False
# Don't apply any prselections
process.cleanPatTaus.preselection = 'abs(eta) < 2.5 & (pt > 18 | userFloat("jetPt") > 18)'
# Setup MET production
process.load("FinalStateAnalysis.PatTools.patMETProduction_cff")
final_met_collection = chain_sequence(
process.customizeMETSequence, "patMETsPF")
process.tuplize += process.customizeMETSequence
# The MET systematics depend on all other systematics
process.systematicsMET.tauSrc = cms.InputTag("cleanPatTaus")
process.systematicsMET.muonSrc = cms.InputTag("cleanPatMuons")
process.systematicsMET.electronSrc = cms.InputTag("cleanPatElectrons")
# Keep all the data formats needed for the systematics
output_commands.append('recoLeafCandidates_*_*_%s'
% process.name_())
# Define the default lepton cleaning
process.cleanPatElectrons.preselection = cms.string('pt > 5')
process.cleanPatElectrons.checkOverlaps.muons.requireNoOverlaps = False
# Make sure we don't kill any good taus by calling them electrons
# Note that we don't actually remove these overlaps.
process.cleanPatElectrons.checkOverlaps.taus = cms.PSet(
src = final_tau_collection,
algorithm = cms.string("byDeltaR"),
preselection = cms.string(
"tauID('decayModeFinding') > 0.5 &&"
"tauID('byLooseCombinedIsolationDeltaBetaCorr') > 0.5 &&"
"tauID('againstElectronLoose') > 0.5 && "
"pt > 10"
),
deltaR = cms.double(0.1),
checkRecoComponents = cms.bool(False),
pairCut = cms.string(""),
requireNoOverlaps = cms.bool(False),
)
output_commands.append('*_cleanPatTaus_*_*')
output_commands.append('*_cleanPatElectrons_*_*')
output_commands.append('*_cleanPatMuons_*_*')
output_commands.append('*_%s_*_*' % final_met_collection.value())
#process.load("PhysicsTools.PatAlgos.triggerLayer1.triggerMatcher_cfi")
#trigtools.switchOnTriggerMatchEmbedding(process)
trigtools.switchOnTrigger(process)
# Build the PATFinalStateEventObject
process.load("FinalStateAnalysis.PatTools.finalStates.patFinalStateEventProducer_cfi")
process.patFinalStateEventProducer.electronSrc = final_electron_collection
process.patFinalStateEventProducer.muonSrc = cms.InputTag("cleanPatMuons")
process.patFinalStateEventProducer.tauSrc = cms.InputTag("cleanPatTaus")
process.patFinalStateEventProducer.jetSrc = cms.InputTag("selectedPatJets")
process.patFinalStateEventProducer.metSrc = final_met_collection
process.tuplize += process.patFinalStateEventProducer
output_commands.append('*_patFinalStateEventProducer_*_*')
process.patFinalStateEventProducer.puTag = cms.string(kwargs['puTag'])
# Now build the PATFinalStateLS object, which holds LumiSection info.
process.load(
"FinalStateAnalysis.PatTools.finalStates.patFinalStateLSProducer_cfi")
process.tuplize += process.finalStateLS
output_commands.append('*_finalStateLS_*_*')
if isMC:
process.finalStateLS.xSec = kwargs['xSec']
# Apply some loose PT cuts on the objects we use to create the final states
# so the combinatorics don't blow up
process.muonsForFinalStates = cms.EDFilter(
"PATMuonRefSelector",
src = cms.InputTag("cleanPatMuons"),
cut = cms.string('pt > 4'),
filter = cms.bool(False),
)
process.electronsForFinalStates = cms.EDFilter(
"PATElectronRefSelector",
src = cms.InputTag("cleanPatElectrons"),
cut = cms.string('abs(eta) < 2.5 & pt > 4'),
filter = cms.bool(False),
)
# Require that the PT of the jet (either corrected jet or tau)
# to be greater than 17
process.tausForFinalStates = cms.EDFilter(
"PATTauRefSelector",
src = cms.InputTag("cleanPatTaus"),
cut = cms.string('abs(eta) < 2.5 & pt > 17 & tauID("decayModeFinding")'),
filter = cms.bool(False),
)
process.selectObjectsForFinalStates = cms.Sequence(
process.muonsForFinalStates
+ process.electronsForFinalStates
+ process.tausForFinalStates
)
process.tuplize += process.selectObjectsForFinalStates
# Now build all of our DiLeptons and TriLepton final states
lepton_types = [('Elec', cms.InputTag("electronsForFinalStates")),
('Mu', cms.InputTag("muonsForFinalStates")),
('Tau', cms.InputTag("tausForFinalStates"))]
#lepton_types = [('Elec', cms.InputTag("cleanPatElectrons")),
#('Mu', cms.InputTag("cleanPatMuons")),
#('Tau', cms.InputTag("cleanPatTaus"))]
process.buildDiLeptons = cms.Sequence()
process.load(
"FinalStateAnalysis.PatTools.finalStates.patFinalStatesEmbedExtraCollections_cfi")
# Build di-lepton pairs
for dilepton in _combinatorics(lepton_types, 2):
# Don't build two jet states
if (dilepton[0][0], dilepton[1][0]) == ('Tau', 'Tau'):
continue
# Define some basic selections for building combinations
cuts = ['smallestDeltaR() > 0.3'] # basic x-cleaning
producer = cms.EDProducer(
"PAT%s%sFinalStateProducer" % (dilepton[0][0], dilepton[1][0]),
evtSrc = cms.InputTag("patFinalStateEventProducer"),
leg1Src = dilepton[0][1],
leg2Src = dilepton[1][1],
# X-cleaning
cut = cms.string(' & '.join(cuts))
)
producer_name = "finalState%s%s" % (dilepton[0][0], dilepton[1][0])
setattr(process, producer_name + "Raw", producer)
process.buildDiLeptons += producer
# Embed the other collections
embedder_seq = helpers.cloneProcessingSnippet(process,
process.patFinalStatesEmbedObjects, producer_name)
process.buildDiLeptons += embedder_seq
# Do some trickery so the final module has a nice output name
final_module_name = chain_sequence(embedder_seq, producer_name + "Raw")
final_module = getattr(process, final_module_name.value())
final_module.setLabel(producer_name)
setattr(process, producer_name, final_module)
output_commands.append("*_%s_*_*" % producer_name)
process.tuplize += process.buildDiLeptons
# Build tri-lepton pairs
process.buildTriLeptons = cms.Sequence()
for trilepton in _combinatorics(lepton_types, 3):
# Don't build three jet states
if (trilepton[0][0], trilepton[1][0], trilepton[2][0]) == \
('Tau', 'Tau', 'Tau'):
continue
# Define some basic selections for building combinations
cuts = ['smallestDeltaR() > 0.3'] # basic x-cleaning
producer = cms.EDProducer(
"PAT%s%s%sFinalStateProducer" %
(trilepton[0][0], trilepton[1][0], trilepton[2][0]),
evtSrc = cms.InputTag("patFinalStateEventProducer"),
leg1Src = trilepton[0][1],
leg2Src = trilepton[1][1],
leg3Src = trilepton[2][1],
# X-cleaning
cut = cms.string(' & '.join(cuts))
)
producer_name = "finalState%s%s%s" % (
trilepton[0][0], trilepton[1][0], trilepton[2][0])
#setattr(process, producer_name, producer)
#process.buildTriLeptons += producer
setattr(process, producer_name + "Raw", producer)
process.buildTriLeptons += producer
# Embed the other collections
embedder_seq = helpers.cloneProcessingSnippet(process,
process.patFinalStatesEmbedObjects, producer_name)
process.buildTriLeptons += embedder_seq
# Do some trickery so the final module has a nice output name
final_module_name = chain_sequence(embedder_seq, producer_name + "Raw")
final_module = getattr(process, final_module_name.value())
final_module.setLabel(producer_name)
setattr(process, producer_name, final_module)
output_commands.append("*_%s_*_*" % producer_name)
process.tuplize += process.buildTriLeptons
# Build 4 lepton final states
process.buildQuadLeptons = cms.Sequence()
for quadlepton in _combinatorics(lepton_types, 4):
# Don't build states with more than 2 hadronic taus
if [x[0] for x in quadlepton].count('Tau') > 2:
continue
# Define some basic selections for building combinations
cuts = ['smallestDeltaR() > 0.3'] # basic x-cleaning
producer = cms.EDProducer(
"PAT%s%s%s%sFinalStateProducer" %
(quadlepton[0][0], quadlepton[1][0], quadlepton[2][0],
quadlepton[3][0]),
evtSrc = cms.InputTag("patFinalStateEventProducer"),
leg1Src = quadlepton[0][1],
leg2Src = quadlepton[1][1],
leg3Src = quadlepton[2][1],
leg4Src = quadlepton[3][1],
# X-cleaning
cut = cms.string(' & '.join(cuts))
)
producer_name = "finalState%s%s%s%s" % (
quadlepton[0][0], quadlepton[1][0], quadlepton[2][0],
quadlepton[3][0]
)
#setattr(process, producer_name, producer)
#process.buildTriLeptons += producer
setattr(process, producer_name + "Raw", producer)
process.buildQuadLeptons += producer
# Embed the other collections
embedder_seq = helpers.cloneProcessingSnippet(process,
process.patFinalStatesEmbedObjects, producer_name)
process.buildQuadLeptons += embedder_seq
# Do some trickery so the final module has a nice output name
final_module_name = chain_sequence(embedder_seq, producer_name + "Raw")
final_module = getattr(process, final_module_name.value())
final_module.setLabel(producer_name)
setattr(process, producer_name, final_module)
output_commands.append("*_%s_*_*" % producer_name)
process.tuplize += process.buildQuadLeptons
# Tell the framework to shut up!
process.load("FWCore.MessageLogger.MessageLogger_cfi")
process.MessageLogger.cerr.FwkReport.reportEvery = 1000
return process.tuplize, output_commands
def loadPAT(process,jetMetCorrections,extMatch):
#-- Changes for electron and photon ID ----------------------------------------
from PhysicsTools.PatAlgos.tools.pfTools import usePFIso
usePFIso( process )
process.patElectrons.isolationValues = cms.PSet(
pfNeutralHadrons = cms.InputTag("elPFIsoValueNeutral03PFIdPFIso"),
pfChargedAll = cms.InputTag("elPFIsoValueChargedAll03PFIdPFIso"),
pfPUChargedHadrons = cms.InputTag("elPFIsoValuePU03PFIdPFIso"),
pfPhotons = cms.InputTag("elPFIsoValueGamma03PFIdPFIso"),
pfChargedHadrons = cms.InputTag("elPFIsoValueCharged03PFIdPFIso")
)
process.patElectrons.isolationValuesNoPFId = cms.PSet(
pfNeutralHadrons = cms.InputTag("elPFIsoValueNeutral03NoPFIdPFIso"),
pfChargedAll = cms.InputTag("elPFIsoValueChargedAll03NoPFIdPFIso"),
pfPUChargedHadrons = cms.InputTag("elPFIsoValuePU03NoPFIdPFIso"),
pfPhotons = cms.InputTag("elPFIsoValueGamma03NoPFIdPFIso"),
pfChargedHadrons = cms.InputTag("elPFIsoValueCharged03NoPFIdPFIso")
)
process.patDefaultSequence.replace(process.patElectrons,process.eleIsoSequence+process.patElectrons)
process.patDefaultSequence.replace(process.patMuons,process.muIsoSequence+process.patMuons)
# Turn off photon-electron cleaning (i.e., flag only)
process.cleanPatPhotons.checkOverlaps.electrons.requireNoOverlaps = False
# Embed tracks, since we drop them
process.patElectrons.embedTrack = True
process.patMuons.embedTrack = True
#include tau decay mode in pat::Taus (elese it will just be uninitialized)
#decay modes are dropped and have to be redone, this is a bit dangorous since the decay modes insered are *not* the ones used in RECO
#process.patTaus.addDecayMode = True
#process.makePatTaus.replace( process.patTaus, process.shrinkingConePFTauDecayModeProducer + process.patTaus )
#Additional electron ids as defined for VBTF
process.load("ElectroWeakAnalysis.WENu.simpleEleIdSequence_cff")
process.patElectrons.electronIDSources = cms.PSet(
eidTight = cms.InputTag("eidTight"),
eidLoose = cms.InputTag("eidLoose"),
eidRobustTight = cms.InputTag("eidRobustTight"),
eidRobustHighEnergy = cms.InputTag("eidRobustHighEnergy"),
eidRobustLoose = cms.InputTag("eidRobustLoose"),
simpleEleId95relIso= cms.InputTag("simpleEleId95relIso"),
simpleEleId90relIso= cms.InputTag("simpleEleId90relIso"),
simpleEleId85relIso= cms.InputTag("simpleEleId85relIso"),
simpleEleId80relIso= cms.InputTag("simpleEleId80relIso"),
simpleEleId70relIso= cms.InputTag("simpleEleId70relIso"),
simpleEleId60relIso= cms.InputTag("simpleEleId60relIso"),
simpleEleId95cIso= cms.InputTag("simpleEleId95cIso"),
simpleEleId90cIso= cms.InputTag("simpleEleId90cIso"),
simpleEleId85cIso= cms.InputTag("simpleEleId85cIso"),
simpleEleId80cIso= cms.InputTag("simpleEleId80cIso"),
simpleEleId70cIso= cms.InputTag("simpleEleId70cIso"),
simpleEleId60cIso= cms.InputTag("simpleEleId60cIso"))
process.patDefaultSequence.replace(process.patElectrons,process.simpleEleIdSequence+process.patElectrons)
#-- Tuning of Monte Carlo matching --------------------------------------------
# Also match with leptons of opposite charge
process.electronMatch.checkCharge = False
process.electronMatch.maxDeltaR = cms.double(0.2)
process.electronMatch.maxDPtRel = cms.double(999999.)
process.muonMatch.checkCharge = False
process.muonMatch.maxDeltaR = cms.double(0.2)
process.muonMatch.maxDPtRel = cms.double(999999.)
#process.tauMatch.checkCharge = False
#process.tauMatch.maxDeltaR = cms.double(0.3)
process.patJetPartonMatch.maxDeltaR = cms.double(0.25)
process.patJetPartonMatch.maxDPtRel = cms.double(999999.)
process.patJetGenJetMatch.maxDeltaR = cms.double(0.25)
process.patJetGenJetMatch.maxDPtRel = cms.double(999999.)
if extMatch:
process.electronMatch.mcStatus = cms.vint32(1,5)
process.electronMatch.matched = "mergedTruth"
process.muonMatch.mcStatus = cms.vint32(1,5)
process.muonMatch.matched = "mergedTruth"
process.patJetPartonMatch.matched = "mergedTruth"
process.patJetPartons.src = "mergedTruth"
process.photonMatch.matched = "mergedTruth"
#process.tauGenJets.GenParticles = "mergedTruth"
#process.tauMatch.matched = "mergedTruth"
#-- Taus ----------------------------------------------------------------------
#some tau discriminators have been switched off during development. They can be switched on again...
#setattr(process.patTaus.tauIDSources, "trackIsolation", cms.InputTag("shrinkingConePFTauDiscriminationByTrackIsolation"))
#setattr(process.patTaus.tauIDSources, "ecalIsolation", cms.InputTag("shrinkingConePFTauDiscriminationByECALIsolation"))
#setattr(process.patTaus.tauIDSources, "byIsolation", cms.InputTag("shrinkingConePFTauDiscriminationByIsolation"))
#setattr(process.patTaus.tauIDSources, "leadingPionPtCut", cms.InputTag("shrinkingConePFTauDiscriminationByLeadingPionPtCut"))
#setattr(process.patTaus.tauIDSources, "trackIsolationUsingLeadingPion", cms.InputTag("shrinkingConePFTauDiscriminationByTrackIsolationUsingLeadingPion"))
#setattr(process.patTaus.tauIDSources, "ecalIsolationUsingLeadingPion", cms.InputTag("shrinkingConePFTauDiscriminationByECALIsolationUsingLeadingPion"))
#setattr(process.patTaus.tauIDSources, "byIsolationUsingLeadingPion", cms.InputTag("shrinkingConePFTauDiscriminationByIsolationUsingLeadingPion"))
#setattr(process.patTaus.tauIDSources, "byTaNC", cms.InputTag("shrinkingConePFTauDiscriminationByTaNC"))
#setattr(process.patTaus.tauIDSources, "byTaNCfrOnePercent", cms.InputTag("shrinkingConePFTauDiscriminationByTaNCfrOnePercent"))
#setattr(process.patTaus.tauIDSources, "byTaNCfrHalfPercent", cms.InputTag("shrinkingConePFTauDiscriminationByTaNCfrHalfPercent"))
#setattr(process.patTaus.tauIDSources, "byTaNCfrQuarterPercent", cms.InputTag("shrinkingConePFTauDiscriminationByTaNCfrQuarterPercent"))
#setattr(process.patTaus.tauIDSources, "byTaNCfrTenthPercent", cms.InputTag("shrinkingConePFTauDiscriminationByTaNCfrTenthPercent"))
#-- Jet corrections -----------------------------------------------------------
# L1 FastJet jet corrections
# kt6PFJets for FastJet corrections are already run and placed before jetCorrection calculation
# apply FastJet corrections only if demanded
# TODO: Check if still necessary to switch here
if ("L1FastJet" in jetMetCorrections):
process.pfJets.doAreaFastjet = True
process.pfJetsPF.doAreaFastjet = True
def configurePatTuple(process, isMC=True, **kwargs):
# Stuff we always keep
output_commands = [
# '*',
'*_addPileupInfo_*_*',
'edmMergeableCounter_*_*_*',
'*_lumiProducer_*_*',
'*_particleFlow_*_*',
'*_offlineBeamSpot_*_*',
'*_generalTracks_*_*',
'*_electronGsfTracks_*_*',
'*_offlinePrimaryVertices*_*_*',
'*_ak5GenJets_*_*',
'*_hltTriggerSummaryAOD_*_*',
'edmTriggerResults_TriggerResults_*_%s' % process.name_(),
'*_MEtoEDMConverter*_*_%s' % process.name_(),
'LHEEventProduct_*_*_*',
'GenEventInfoProduct_generator_*_*',
'*_kt6PFJetsForRhoComputationVoronoi_rho_*',
'*_kt6PFJetsForIso_rho_*',
'*_kt6PFJets_rho_*',
'*_kt6PFJetsCentralHZGPho_rho_*',
'*_kt6PFJetsCentralHZGEle_rho_*',
'*_kt6PFJetsCentralHZGMu_rho_*',
'*_kt6PFJetsCentralNeutralHZGMu_rho_*',
'*_kt6PFJetsCentral_rho_*',
'*_kt6PFJetsCentralNeutral_rho_*', #for zz muons
'*_photonCore_*_*',
# for Zmumu -> embedded samples
'*_generator_weight_*', # 2k11
"GenFilterInfo_generator_minVisPtFilter_*", #2k12
'*_genDaughters_*_*',
'*_boosted*_*_*',
'*_tmfTracks_*_*',
]
# Define our patTuple production sequence
process.tuplize = cms.Sequence()
# Only keep interesting genParticles
process.load("FinalStateAnalysis.RecoTools.genParticleTrimmer_cfi")
process.genParticles = process.prunedGenParticles.clone()
if isMC:
#process.tuplize += process.genParticles
#output_commands.append('*_genParticles_*_%s' % process.name_())
output_commands.append('*_genParticles_*_*')
output_commands.append('*_tauGenJetsSelectorAllHadrons_*_*')
output_commands.append('*_tauGenJets_*_*')
output_commands.append('*_ak5GenJets_*_*')
# Select vertices
process.load("FinalStateAnalysis.RecoTools.vertexSelection_cff")
output_commands.append('*_selectedPrimaryVertex_*_*')
output_commands.append('*_selectPrimaryVerticesQuality_*_*')
process.tuplize += process.selectPrimaryVertices
# Run the ZZ recipe for rho
from RecoJets.JetProducers.kt4PFJets_cfi import kt4PFJets \
as zzCantDoAnythingRight
process.kt6PFJetsForIso = zzCantDoAnythingRight.clone(
rParam = cms.double(0.6),
doAreaFastjet = cms.bool(True),
doRhoFastjet = cms.bool(True),
Rho_EtaMax = cms.double(2.5),
Ghost_EtaMax = cms.double(2.5),
)
process.tuplize += process.kt6PFJetsForIso
# Standard services
process.load('Configuration.StandardSequences.Services_cff')
# tack on seeds for FSA PATTuple modules
add_fsa_random_seeds(process)
if cmssw_major_version() == 5 and cmssw_minor_version() >= 3:
process.load('Configuration.Geometry.GeometryIdeal_cff')
else:
process.load('Configuration.StandardSequences.GeometryIdeal_cff')
process.load('Configuration.StandardSequences.MagneticField_cff')
process.load('Configuration.StandardSequences.FrontierConditions_GlobalTag_cff')
# Rerun tau ID
if cmssw_major_version() == 4:
process.load("RecoTauTag.Configuration.RecoPFTauTag_cff")
# Optimization - remove PFTauTagInfo compatibility layer
process.recoTauClassicHPSSequence.remove(process.pfRecoTauTagInfoProducer)
process.recoTauClassicHPSSequence.remove(process.ak5PFJetTracksAssociatorAtVertex)
assert(process.combinatoricRecoTaus.modifiers[3].name.value() == 'TTIworkaround')
del process.combinatoricRecoTaus.modifiers[3]
# Don't build junky taus below 19 GeV
process.combinatoricRecoTaus.builders[0].minPtToBuild = cms.double(17)
process.tuplize += process.recoTauClassicHPSSequence
else:
# We can run less tau stuff in 52, since HPS taus already built.
process.load("RecoTauTag.Configuration.updateHPSPFTaus_cff")
process.tuplize += process.updateHPSPFTaus
## Run rho computation. Only necessary in 42X
if cmssw_major_version() == 4:
from RecoJets.Configuration.RecoPFJets_cff import kt6PFJets
kt6PFJets.Rho_EtaMax = cms.double(4.4)
kt6PFJets.doRhoFastjet = True
process.kt6PFJets = kt6PFJets
process.tuplize += process.kt6PFJets
# In 4_X we have to rerun ak5PFJets with area computation enabled.
if cmssw_major_version() == 4:
process.load("RecoJets.Configuration.RecoPFJets_cff")
process.ak5PFJets.doAreaFastjet = True
process.tuplize += process.ak5PFJets
# Only keep the new ak5PFJets
output_commands.append('*_ak5PFJets_*_%s' % process.name_())
else:
# Just keep the normal ones
output_commands.append('*_ak5PFJets_*_*')
# In the embedded samples, we need to re-run the b-tagging
if kwargs['embedded']:
process.load('RecoBTag/Configuration/RecoBTag_cff')
process.load('RecoJets/JetAssociationProducers/ak5JTA_cff')
process.ak5JetTracksAssociatorAtVertex.jets = cms.InputTag("ak5PFJets")
process.ak5JetTracksAssociatorAtVertex.tracks = cms.InputTag("tmfTracks")
process.tuplize += process.ak5JetTracksAssociatorAtVertex
process.tuplize += process.btagging
# Run pat default sequence
process.load("PhysicsTools.PatAlgos.patSequences_cff")
# Embed PF Isolation in electrons & muons
pfTools.usePFIso(process)
# Setup H2Tau custom iso definitions
setup_h2tau_iso(process)
# Setup hZg custom iso definitions
add_hZg_iso_needs(process)
# Use POG recommendations for (these) electron Isos
process.elPFIsoValueGamma04PFIdPFIso.deposits[0].vetos = cms.vstring('EcalEndcaps:ConeVeto(0.08)')
process.elPFIsoValueGamma04NoPFIdPFIso.deposits[0].vetos = cms.vstring('EcalEndcaps:ConeVeto(0.08)')
process.elPFIsoValueCharged04PFIdPFIso.deposits[0].vetos = cms.vstring('EcalEndcaps:ConeVeto(0.015)')
process.elPFIsoValueCharged04NoPFIdPFIso.deposits[0].vetos = cms.vstring('EcalEndcaps:ConeVeto(0.015)')
# Unembed junk
process.patMuons.embedCaloMETMuonCorrs = False
process.patMuons.embedTcMETMuonCorrs = False
process.patMuons.embedTrack = True
process.patMuons.pvSrc = cms.InputTag("selectedPrimaryVertex")
# Do extra electron ID
process.load("FinalStateAnalysis.PatTools.electrons.electronID_cff")
process.tuplize += process.recoElectronID
process.patElectrons.electronIDSources = process.electronIDSources
process.patElectrons.embedTrack = True
# Now run PAT
process.tuplize += process.patDefaultSequence
# Add FSR photons for ZZ analysis
process.load("FinalStateAnalysis.PatTools.fsrPhotons_cff")
process.tuplize += process.fsrPhotonSequence
# Use HPS taus
tautools.switchToPFTauHPS(process)
# Disable tau IsoDeposits
process.patDefaultSequence.remove(process.patPFTauIsolation)
process.patTaus.isoDeposits = cms.PSet()
process.patTaus.userIsolation = cms.PSet()
# Disable gen match embedding - we keep it in the ntuple
process.patMuons.embedGenMatch = False
process.patElectrons.embedGenMatch = False
process.patTaus.embedGenMatch = False
process.patTaus.embedGenJetMatch = False
# Use PFJets and turn on JEC
jec = [ 'L1FastJet', 'L2Relative', 'L3Absolute' ]
# If we are running on data (not MC), or embedded sample,
# apply the MC-DATA residual correction.
if not isMC or kwargs['embedded']:
jec.extend([ 'L2L3Residual' ])
# Define options for BTagging - these are release dependent.
btag_options = {'doBTagging' : True}
if cmssw_major_version() == 5:
btag_options['btagInfo'] = [
'impactParameterTagInfos',
'secondaryVertexTagInfos',
'softMuonTagInfos',
'secondaryVertexNegativeTagInfos'
]
btag_options['btagdiscriminators'] = [
'trackCountingHighEffBJetTags',
'simpleSecondaryVertexHighEffBJetTags',
'combinedSecondaryVertexMVABJetTags',
'combinedSecondaryVertexBJetTags',
]
# Use AK5 PFJets
jettools.switchJetCollection(
process,
cms.InputTag('ak5PFJets'),
doJTA = False,
jetCorrLabel = ('AK5PF', jec),
#jetCorrLabel = None,
doType1MET = False,
doJetID = True,
genJetCollection = cms.InputTag("ak5GenJets"),
**btag_options
)
process.patJets.embedPFCandidates = False
process.patJets.embedCaloTowers = False
process.patJets.embedGenJetMatch = False
process.patJets.addAssociatedTracks = False
process.patJets.embedGenPartonMatch = False
#process.patJetCorrFactors.useRho = True
## Let's use the same rho as in the TauID, so we don't need to do it twice.
#process.patJetCorrFactors.rho = cms.InputTag(
#"kt6PFJetsForRhoComputationVoronoi", "rho")
# Use PFMEt
mettools.addPfMET(process)
if not isMC:
coreTools.runOnData(process)
process.patMETsPF.addGenMET = False
output_commands.append('*_selectedPatJets_*_*')
# Customize/embed all our sequences
process.load("FinalStateAnalysis.PatTools.patJetProduction_cff")
# We have to keep all jets (for the MVA MET...)
process.patJetGarbageRemoval.cut = 'pt > 0'
final_jet_collection = chain_sequence(
process.customizeJetSequence, "patJets")
process.customizeJetSequence.insert(0, process.patJets)
# Make it a "complete" sequence
process.customizeJetSequence += process.selectedPatJets
# We can't mess up the selected pat jets because the taus use them.
process.selectedPatJets.src = final_jet_collection
process.patDefaultSequence.replace(process.patJets,
process.customizeJetSequence)
# Produce the electron collections
process.load("FinalStateAnalysis.PatTools.patElectronProduction_cff")
final_electron_collection = chain_sequence(
process.customizeElectronSequence, "selectedPatElectrons")
process.tuplize += process.customizeElectronSequence
process.customizeElectronSequence.insert(0, process.selectedPatElectrons)
process.patDefaultSequence.replace(process.selectedPatElectrons,
process.customizeElectronSequence)
# We have to do the pat Jets before the pat electrons since we embed them
process.customizeElectronSequence.insert(0, process.selectedPatJets)
process.cleanPatElectrons.src = final_electron_collection
#setup the energy regression for the specific dataset
process.patElectronEnergyCorrections.isMC = cms.bool(bool(isMC))
process.patElectronEnergyCorrections.isAOD = \
cms.bool(bool(kwargs['isAOD']))
process.patElectronEnergyCorrections.dataSet = \
cms.string(kwargs['calibrationTarget'])
process.load("FinalStateAnalysis.PatTools.patMuonProduction_cff")
final_muon_collection = chain_sequence(
process.customizeMuonSequence, "selectedPatMuons")
process.customizeMuonSequence.insert(0, process.selectedPatMuons)
process.patDefaultSequence.replace(process.selectedPatMuons,
process.customizeMuonSequence)
process.cleanPatMuons.src = final_muon_collection
process.patMuonRochesterCorrectionEmbedder.isMC = cms.bool(bool(isMC))
process.load("FinalStateAnalysis.PatTools.patTauProduction_cff")
final_tau_collection = chain_sequence(
process.customizeTauSequence, "selectedPatTaus")
# Inject into the pat sequence
process.customizeTauSequence.insert(0, process.selectedPatTaus)
process.patDefaultSequence.replace(process.selectedPatTaus,
process.customizeTauSequence)
process.cleanPatTaus.src = final_tau_collection
# Remove muons and electrons
process.cleanPatTaus.checkOverlaps.muons.requireNoOverlaps = False
process.cleanPatTaus.checkOverlaps.electrons.requireNoOverlaps = False
# Apply a loose preselection
process.cleanPatTaus.preselection = 'abs(eta) < 2.5 & pt > 17'
# Don't apply any "final" cut
process.cleanPatTaus.finalCut = ''
# Setup pat::Photon Production
process.load("FinalStateAnalysis.PatTools.patPhotonProduction_cff")
final_photon_collection = chain_sequence(process.customizePhotonSequence,
"selectedPatPhotons")
#inject photons into pat sequence
process.customizePhotonSequence.insert(0,process.selectedPatPhotons)
process.patDefaultSequence.replace(process.selectedPatPhotons,
process.customizePhotonSequence)
process.cleanPatPhotons.src = final_photon_collection
# Setup MET production
process.load("FinalStateAnalysis.PatTools.patMETProduction_cff")
final_met_collection = chain_sequence(
process.customizeMETSequence, "patMETsPF")
process.tuplize += process.customizeMETSequence
# The MET systematics depend on all other systematics
process.systematicsMET.tauSrc = cms.InputTag("cleanPatTaus")
process.systematicsMET.muonSrc = cms.InputTag("cleanPatMuons")
process.systematicsMET.electronSrc = cms.InputTag("cleanPatElectrons")
# Keep all the data formats needed for the systematics
output_commands.append('recoLeafCandidates_*_*_%s'
% process.name_())
# Define the default lepton cleaning
process.cleanPatElectrons.preselection = cms.string('pt > 5')
process.cleanPatElectrons.checkOverlaps.muons.requireNoOverlaps = False
# Make sure we don't kill any good taus by calling them electrons
# Note that we don't actually remove these overlaps.
process.cleanPatElectrons.checkOverlaps.taus = cms.PSet(
src = final_tau_collection,
algorithm = cms.string("byDeltaR"),
preselection = cms.string(
"tauID('decayModeFinding') > 0.5 &&"
"tauID('byLooseCombinedIsolationDeltaBetaCorr') > 0.5 &&"
"tauID('againstElectronLoose') > 0.5 && "
"pt > 10"
),
deltaR = cms.double(0.1),
checkRecoComponents = cms.bool(False),
pairCut = cms.string(""),
requireNoOverlaps = cms.bool(False),
)
output_commands.append('*_cleanPatTaus_*_*')
output_commands.append('*_cleanPatElectrons_*_*')
output_commands.append('*_cleanPatMuons_*_*')
output_commands.append('*_cleanPatPhotons_*_*')
output_commands.append('*_%s_*_*' % final_met_collection.value())
trigtools.switchOnTrigger(process)
# Now build the PATFinalStateLS object, which holds LumiSection info.
process.load(
"FinalStateAnalysis.PatTools.finalStates.patFinalStateLSProducer_cfi")
process.tuplize += process.finalStateLS
output_commands.append('*_finalStateLS_*_*')
if isMC:
process.finalStateLS.xSec = kwargs['xSec']
# Tell the framework to shut up!
process.load("FWCore.MessageLogger.MessageLogger_cfi")
process.MessageLogger.cerr.FwkReport.reportEvery = 1000
# Which collections are used to build the final states
fs_daughter_inputs = {
'electrons' : 'cleanPatElectrons',
'muons' : 'cleanPatMuons',
'taus' : 'cleanPatTaus',
'photons' : 'cleanPatPhotons',
'jets' : 'selectedPatJets',
'met' : final_met_collection,
}
# Setup all the PATFinalState objects
produce_final_states(process, fs_daughter_inputs, output_commands,
process.tuplize, kwargs['puTag'])
return process.tuplize, output_commands
def configurePatTuple(process, isMC=True, **kwargs):
# Stuff we always keep
output_commands = [
'*_addPileupInfo_*_*',
'edmMergeableCounter_*_*_*',
'*_lumiProducer_*_*',
'*_particleFlow_*_*',
'*_offlineBeamSpot_*_*',
'*_generalTracks_*_*',
'*_electronGsfTracks_*_*',
'*_gsfElectrons_*_*',
'*_gsfElectronCores_*_*',
'*_offlinePrimaryVertices*_*_*',
'*_ak5GenJets_*_*',
'*_hltTriggerSummaryAOD_*_*',
'edmTriggerResults_TriggerResults_*_%s' % process.name_(),
'*_MEtoEDMConverter*_*_%s' % process.name_(),
'LHEEventProduct_*_*_*',
'GenEventInfoProduct_generator_*_*',
'*_kt6PFJetsForRhoComputationVoronoi_rho_*',
'*_kt6PFJetsForIso_rho_*',
'*_kt6PFJets_rho_*',
'*_kt6PFJetsHZGPho_rho_*',
'*_kt6PFJetsCentralHZGEle_rho_*',
'*_kt6PFJetsCentralHZGMu_rho_*',
'*_kt6PFJetsCentralNeutralHZGMu_rho_*',
'*_kt6PFJetsCentral_rho_*',
'*_kt6PFJetsCentralNeutral_rho_*', # for zz muons
'*_photonCore_*_*',
'*_boostedFsrPhotons_*_*',
# for Zmumu -> embedded samples
# https://twiki.cern.ch/twiki/bin/view/CMS/MuonTauReplacementRecHit
'*_generalTracksORG_*_EmbeddedRECO',
'*_electronGsfTracksORG_*_EmbeddedRECO',
'double_TauSpinnerReco_TauSpinnerWT_EmbeddedSPIN',
'double_ZmumuEvtSelEffCorrWeightProducer_weight_EmbeddedRECO',
'double_muonRadiationCorrWeightProducer_weight_EmbeddedRECO',
'GenFilterInfo_generator_minVisPtFilter_EmbeddedRECO',
]
# Define our patTuple production sequence
process.tuplize = cms.Sequence()
# Only keep interesting genParticles
process.load("FinalStateAnalysis.RecoTools.genParticleTrimmer_cfi")
process.genParticles = process.prunedGenParticles.clone()
if isMC:
#process.tuplize += process.genParticles
#output_commands.append('*_genParticles_*_%s' % process.name_())
output_commands.append('*_genParticles_*_*')
output_commands.append('*_tauGenJetsSelectorAllHadrons_*_*')
output_commands.append('*_tauGenJets_*_*')
output_commands.append('*_ak5GenJets_*_*')
# Select vertices
process.load("FinalStateAnalysis.RecoTools.vertexSelection_cff")
output_commands.append('*_selectedPrimaryVertex*_*_*')
output_commands.append('*_selectPrimaryVerticesQuality*_*_*')
process.tuplize += process.selectPrimaryVertices
# Run the ZZ recipe for rho
from RecoJets.JetProducers.kt4PFJets_cfi import kt4PFJets \
as zzCantDoAnythingRight
process.kt6PFJetsForIso = zzCantDoAnythingRight.clone(
rParam=cms.double(0.6),
doAreaFastjet=cms.bool(True),
doRhoFastjet=cms.bool(True),
Rho_EtaMax=cms.double(2.5),
Ghost_EtaMax=cms.double(2.5),
)
process.tuplize += process.kt6PFJetsForIso
# Standard services
process.load('Configuration.StandardSequences.Services_cff')
# tack on seeds for FSA PATTuple modules
add_fsa_random_seeds(process)
if cmssw_major_version() == 5 and cmssw_minor_version() >= 3:
process.load('Configuration.Geometry.GeometryDB_cff')
else:
process.load('Configuration.StandardSequences.GeometryDB_cff')
process.load('Configuration.StandardSequences.MagneticField_cff')
process.load(
'Configuration.StandardSequences.FrontierConditions_GlobalTag_cff')
# Rerun tau ID
process.load("RecoTauTag.Configuration.RecoPFTauTag_cff")
# Optimization - remove PFTauTagInfo compatibility layer
process.recoTauClassicHPSSequence.remove(
process.pfRecoTauTagInfoProducer)
process.recoTauClassicHPSSequence.remove(
process.ak5PFJetTracksAssociatorAtVertex)
assert(process.combinatoricRecoTaus.modifiers[3].name.value() ==
'TTIworkaround')
del process.combinatoricRecoTaus.modifiers[3]
# Don't build junky taus below 19 GeV
process.combinatoricRecoTaus.builders[0].minPtToBuild = cms.double(17)
process.tuplize += process.recoTauClassicHPSSequence
## Run rho computation. Only necessary in 42X
if cmssw_major_version() == 4:
# This function call can klobber everything if it isn't done
# before the other things are attached to the process, so do it now.
# The klobbering would occur through usePFIso->setupPFIso->_loadPFBRECO
from CommonTools.ParticleFlow.Tools.pfIsolation import _loadPFBRECO
_loadPFBRECO(process)
process.load("RecoJets.Configuration.RecoPFJets_cff")
process.kt6PFJets.Rho_EtaMax = cms.double(4.4)
process.kt6PFJets.doRhoFastjet = True
process.tuplize += process.kt6PFJets
# In 4_X we have to rerun ak5PFJets with area computation enabled.
if cmssw_major_version() == 4:
process.load("RecoJets.Configuration.RecoPFJets_cff")
process.ak5PFJets.doAreaFastjet = True
process.tuplize += process.ak5PFJets
# Only keep the new ak5PFJets
output_commands.append('*_ak5PFJets_*_%s' % process.name_())
else:
# Just keep the normal ones
output_commands.append('*_ak5PFJets_*_*')
# Run pat default sequence
process.load("PhysicsTools.PatAlgos.patSequences_cff")
# Embed PF Isolation in electrons & muons
pfTools.usePFIso(process)
# Setup H2Tau custom iso definitions
setup_h2tau_iso(process)
# Setup hZg custom iso definitions
add_hZg_iso_needs(process)
#alter the photon matching to accept various fakes
# and sort matches by d-pt-rel
if isMC:
process.photonMatch = cms.EDProducer(
"MCMatcherByPt",
src=cms.InputTag("photons"),
maxDPtRel=cms.double(100.0),
mcPdgId=cms.vint32(),
mcStatus=cms.vint32(1),
resolveByMatchQuality=cms.bool(False),
maxDeltaR=cms.double(0.3),
checkCharge=cms.bool(False),
resolveAmbiguities=cms.bool(True),
matched=cms.InputTag("genParticles")
)
# Use POG recommendations for (these) electron Isos
process.elPFIsoValueGamma04PFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.08)')
process.elPFIsoValueGamma04NoPFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.08)')
process.elPFIsoValueCharged04PFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.015)')
process.elPFIsoValueCharged04NoPFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.015)')
# Unembed junk
process.patMuons.embedCaloMETMuonCorrs = False
process.patMuons.embedTcMETMuonCorrs = False
process.patMuons.embedTrack = True
process.patMuons.pvSrc = cms.InputTag("selectedPrimaryVertex")
# Do extra electron ID
process.load("FinalStateAnalysis.PatTools.electrons.electronID_cff")
if cmssw_major_version() == 4:
process.patDefaultSequence.replace(process.patElectrons,
process.recoElectronID42X +
process.patElectrons)
process.patElectrons.electronIDSources = process.electronIDSources42X
else:
process.patDefaultSequence.replace(process.patElectrons,
process.recoElectronID5YX +
process.patElectrons)
process.patElectrons.electronIDSources = process.electronIDSources5YX
process.electronMatch.checkCharge = cms.bool(False)
process.patElectrons.embedTrack = False
process.patElectrons.embedPFCandidate = False
process.patElectrons.embedGsfElectronCore = False
process.patElectrons.embedSuperCluster = True
# Now run PAT
process.tuplize += process.patDefaultSequence
# Add FSR photons for ZZ analysis
process.load("FinalStateAnalysis.PatTools.fsrPhotons_cff")
process.tuplize += process.fsrPhotonSequence
# Use HPS taus
tautools.switchToPFTauHPS(process)
# Disable tau IsoDeposits
process.patDefaultSequence.remove(process.patPFTauIsolation)
process.patTaus.isoDeposits = cms.PSet()
process.patTaus.userIsolation = cms.PSet()
# Disable gen match embedding - we keep it in the ntuple
process.patMuons.embedGenMatch = False
process.patElectrons.embedGenMatch = False
process.patTaus.embedGenMatch = False
process.patTaus.embedGenJetMatch = False
process.patPhotons.embedGenMatch = False
# Use PFJets and turn on JEC
jec = ['L1FastJet', 'L2Relative', 'L3Absolute']
# If we are running on data (not MC), or embedded sample,
# apply the MC-DATA residual correction.
if not isMC or kwargs['embedded']:
jec.extend(['L2L3Residual'])
# Define options for BTagging - these are release dependent.
btag_options = {'doBTagging': True}
if cmssw_major_version() == 5:
btag_options['btagInfo'] = [
'impactParameterTagInfos',
'secondaryVertexTagInfos',
'softMuonTagInfos',
'secondaryVertexNegativeTagInfos'
]
btag_options['btagdiscriminators'] = [
'trackCountingHighEffBJetTags',
'simpleSecondaryVertexHighEffBJetTags',
'combinedSecondaryVertexMVABJetTags',
'combinedSecondaryVertexBJetTags',
]
# Use AK5 PFJets
jettools.switchJetCollection(
process,
cms.InputTag('ak5PFJets'),
doJTA=False,
jetCorrLabel=('AK5PF', jec),
#jetCorrLabel = None,
doType1MET=False,
doJetID=True,
genJetCollection=cms.InputTag("ak5GenJets"),
**btag_options
)
process.patJets.embedPFCandidates = False
process.patJets.embedCaloTowers = False
process.patJets.embedGenJetMatch = False
process.patJets.addAssociatedTracks = False
process.patJets.embedGenPartonMatch = False
#process.patJetCorrFactors.useRho = True
## Let's use the same rho as in the TauID, so we don't need to do it twice.
#process.patJetCorrFactors.rho = cms.InputTag(
#"kt6PFJetsForRhoComputationVoronoi", "rho")
# Use PFMEt
mettools.addPfMET(process)
if not isMC:
coreTools.runOnData(process)
process.patMETsPF.addGenMET = False
output_commands.append('*_selectedPatJets_*_*')
# Customize/embed all our sequences
process.load("FinalStateAnalysis.PatTools.patJetProduction_cff")
process.patJetGarbageRemoval.cut = 'pt > 12'
final_jet_collection = chain_sequence(
process.customizeJetSequence, "patJets")
process.customizeJetSequence.insert(0, process.patJets)
# Make it a "complete" sequence
process.customizeJetSequence += process.selectedPatJets
# We can't mess up the selected pat jets because the taus use them.
process.selectedPatJets.src = final_jet_collection
process.patDefaultSequence.replace(process.patJets,
process.customizeJetSequence)
# Produce the electron collections
process.load("FinalStateAnalysis.PatTools.patElectronProduction_cff")
# Electron Energy Regression and Calibrations
process.load(
"EgammaAnalysis.ElectronTools.electronRegressionEnergyProducer_cfi")
process.load("EgammaAnalysis.ElectronTools.calibratedPatElectrons_cfi")
#setup the energy regression for the specific dataset
if kwargs['eleReg']:
print "-- Applying Electron Regression and Calibration --"
process.customizeElectronSequence += process.eleRegressionEnergy
process.customizeElectronSequence += process.calibratedPatElectrons
process.eleRegressionEnergy.energyRegressionType = cms.uint32(2)
process.calibratedPatElectrons.correctionsType = cms.int32(2)
if isMC:
process.calibratedPatElectrons.inputDataset = cms.string(
"Summer12_LegacyPaper")
else:
process.calibratedPatElectrons.inputDataset = cms.string(
"22Jan2013ReReco")
process.calibratedPatElectrons.combinationType = cms.int32(3)
process.calibratedPatElectrons.lumiRatio = cms.double(1.0)
process.calibratedPatElectrons.synchronization = cms.bool(True)
process.calibratedPatElectrons.isMC = cms.bool(isMC == 1)
process.calibratedPatElectrons.verbose = cms.bool(False)
final_electron_collection = chain_sequence(
process.customizeElectronSequence, "selectedPatElectrons",
# Some of the EGamma modules have non-standard src InputTags,
# specify them here.
("src", "inputPatElectronsTag", "inputElectronsTag")
)
process.tuplize += process.customizeElectronSequence
process.customizeElectronSequence.insert(0, process.selectedPatElectrons)
process.patDefaultSequence.replace(process.selectedPatElectrons,
process.customizeElectronSequence)
# We have to do the pat Jets before the pat electrons since we embed them
process.customizeElectronSequence.insert(0, process.selectedPatJets)
# Define cleanPatElectrons input collection
process.cleanPatElectrons.src = final_electron_collection
process.load("FinalStateAnalysis.PatTools.patMuonProduction_cff")
final_muon_collection = chain_sequence(
process.customizeMuonSequence, "selectedPatMuons")
process.customizeMuonSequence.insert(0, process.selectedPatMuons)
process.patDefaultSequence.replace(process.selectedPatMuons,
process.customizeMuonSequence)
process.cleanPatMuons.src = final_muon_collection
process.patMuonRochesterCorrectionEmbedder.isMC = cms.bool(bool(isMC))
process.load("FinalStateAnalysis.PatTools.patTauProduction_cff")
# Require all taus to pass decay mode finding and have high PT
process.patTauGarbageRemoval.cut = cms.string(
"pt > 17 && abs(eta) < 2.5 && tauID('decayModeFinding')")
final_tau_collection = chain_sequence(
process.customizeTauSequence, "selectedPatTaus")
# Inject into the pat sequence
process.customizeTauSequence.insert(0, process.selectedPatTaus)
process.patDefaultSequence.replace(process.selectedPatTaus,
process.customizeTauSequence)
process.cleanPatTaus.src = final_tau_collection
# Remove muons and electrons
process.cleanPatTaus.checkOverlaps.muons.requireNoOverlaps = False
process.cleanPatTaus.checkOverlaps.electrons.requireNoOverlaps = False
# Cuts already applied by the garbage removal
process.cleanPatTaus.preselection = ''
process.cleanPatTaus.finalCut = ''
# Setup pat::Photon Production
process.load("FinalStateAnalysis.PatTools.patPhotonProduction_cff")
final_photon_collection = chain_sequence(process.customizePhotonSequence,
"selectedPatPhotons")
#setup PHOSPHOR for a specific dataset
if cmssw_major_version() == 4: # for now 2011 = CMSSW42X
process.patPhotonPHOSPHOREmbedder.year = cms.uint32(2011)
else: # 2012 is 5YX
process.patPhotonPHOSPHOREmbedder.year = cms.uint32(2012)
process.patPhotonPHOSPHOREmbedder.isMC = cms.bool(bool(isMC))
#inject photons into pat sequence
process.customizePhotonSequence.insert(0, process.selectedPatPhotons)
process.patDefaultSequence.replace(process.selectedPatPhotons,
process.customizePhotonSequence)
process.cleanPatPhotons.src = final_photon_collection
# We cut out a lot of the junky taus and jets - but we need these
# to correctly apply the MET uncertainties. So, let's make a
# non-cleaned version of the jet and tau sequence.
process.jetsForMetSyst = helpers.cloneProcessingSnippet(
process, process.customizeJetSequence, 'ForMETSyst')
process.tausForMetSyst = helpers.cloneProcessingSnippet(
process, process.customizeTauSequence, 'ForMETSyst')
# Don't apply any cut for these
process.patTauGarbageRemovalForMETSyst.cut = ''
process.patJetGarbageRemovalForMETSyst.cut = ''
process.tuplize += process.jetsForMetSyst
process.tuplize += process.tausForMetSyst
# We have to make our clone of cleanPatTaus separately, since e/mu
# cleaning is applied - therefore it isn't in the customizeTausSequence.
process.cleanPatTausForMETSyst = process.cleanPatTaus.clone(
src=cms.InputTag(process.cleanPatTaus.src.value() + "ForMETSyst"))
process.cleanPatTausForMETSyst.preselection = ''
process.cleanPatTausForMETSyst.finalCut = ''
process.patTausEmbedJetInfoForMETSyst.jetSrc = \
final_jet_collection.value() + "ForMETSyst"
process.tuplize += process.cleanPatTausForMETSyst
# Setup MET production
process.load("FinalStateAnalysis.PatTools.patMETProduction_cff")
# The MET systematics depend on all other systematics
process.systematicsMET.tauSrc = cms.InputTag("cleanPatTausForMETSyst")
process.systematicsMET.muonSrc = cms.InputTag("cleanPatMuons")
process.systematicsMET.electronSrc = cms.InputTag("cleanPatElectrons")
final_met_collection = chain_sequence(
process.customizeMETSequence, "patMETsPF")
process.tuplize += process.customizeMETSequence
output_commands.append('*_%s_*_*' % final_met_collection.value())
# Make a version with the MVA MET reconstruction method
process.load("FinalStateAnalysis.PatTools.met.mvaMetOnPatTuple_cff")
process.tuplize += process.pfMEtMVAsequence
mva_met_sequence = helpers.cloneProcessingSnippet(
process, process.customizeMETSequence, "MVA")
final_mvamet_collection = chain_sequence(
mva_met_sequence, "patMEtMVA")
process.tuplize += mva_met_sequence
output_commands.append('*_%s_*_*' % final_mvamet_collection.value())
# Keep all the data formats needed for the systematics
output_commands.append('recoLeafCandidates_*_*_%s'
% process.name_())
# We can drop to jet and tau MET specific products. They were only used for
# computation of the MET numbers.
output_commands.append('drop recoLeafCandidates_*ForMETSyst_*_%s'
% process.name_())
# Define the default lepton cleaning
process.cleanPatElectrons.preselection = cms.string(
'pt > 5')
process.cleanPatElectrons.checkOverlaps.muons.requireNoOverlaps = False
# Make sure we don't kill any good taus by calling them electrons
# Note that we don't actually remove these overlaps.
process.cleanPatElectrons.checkOverlaps.taus = cms.PSet(
src=final_tau_collection,
algorithm=cms.string("byDeltaR"),
preselection=cms.string(
"tauID('decayModeFinding') > 0.5 &&"
"tauID('byLooseCombinedIsolationDeltaBetaCorr') > 0.5 &&"
"tauID('againstElectronLoose') > 0.5 && "
"pt > 10"
),
deltaR=cms.double(0.1),
checkRecoComponents=cms.bool(False),
pairCut=cms.string(""),
requireNoOverlaps=cms.bool(False),
)
output_commands.append('*_cleanPatTaus_*_*')
output_commands.append('*_cleanPatElectrons_*_*')
output_commands.append('*_cleanPatMuons_*_*')
output_commands.append('*_cleanPatPhotons_*_*')
trigtools.switchOnTrigger(process)
#configure the PAT trigger
if kwargs['HLTprocess']:
process.patTrigger.processName = cms.string(kwargs['HLTprocess'])
process.patTriggerEvent.processName = cms.string(kwargs['HLTprocess'])
# Now build the PATFinalStateLS object, which holds LumiSection info.
process.load(
"FinalStateAnalysis.PatTools.finalStates.patFinalStateLSProducer_cfi")
process.tuplize += process.finalStateLS
output_commands.append('*_finalStateLS_*_*')
if isMC:
process.finalStateLS.xSec = kwargs['xSec']
# Tell the framework to shut up!
process.load("FWCore.MessageLogger.MessageLogger_cfi")
process.MessageLogger.cerr.FwkReport.reportEvery = 1000
# Which collections are used to build the final states
fs_daughter_inputs = {
'electrons': 'cleanPatElectrons',
'muons': 'cleanPatMuons',
'taus': 'cleanPatTaus',
'photons': 'cleanPatPhotons',
'jets': 'selectedPatJets',
'pfmet': final_met_collection,
'mvamet': final_mvamet_collection,
}
# Setup all the PATFinalState objects
produce_final_states(process, fs_daughter_inputs, output_commands,
process.tuplize, kwargs['puTag'],
zzMode=kwargs.get('zzMode', False))
return process.tuplize, output_commands
def configurePatTuple(process, isMC=True, **kwargs):
'''
Core function for PATTuple production
'''
#fix argparser output
isMC = bool(isMC)
########################
## ##
## PATTuple content ##
## ##
########################
# Stuff we always keep
output_commands = [
'*_addPileupInfo_*_*',
'edmMergeableCounter_*_*_*',
'*_lumiProducer_*_*',
'*_particleFlow_*_*',
'*_offlineBeamSpot_*_*',
'*_generalTracks_*_*',
'*_electronGsfTracks_*_*',
'*_gsfElectrons_*_*',
'*_gsfElectronCores_*_*',
'*_offlinePrimaryVertices*_*_*',
'*_ak5GenJets_*_*',
'*_hltTriggerSummaryAOD_*_*',
'edmTriggerResults_TriggerResults_*_%s' % process.name_(),
'*_MEtoEDMConverter*_*_%s' % process.name_(),
'LHEEventProduct_*_*_*',
'GenEventInfoProduct_generator_*_*',
'*_kt6PFJetsForRhoComputationVoronoi_rho_*',
'*_kt6PFJetsForIso_rho_*',
'*_kt6PFJets_rho_*',
'*_kt6PFJetsHZGPho_rho_*',
'*_kt6PFJetsCentralHZGEle_rho_*',
'*_kt6PFJetsCentralHZGMu_rho_*',
'*_kt6PFJetsCentralNeutralHZGMu_rho_*',
'*_kt6PFJetsCentral_rho_*',
'*_kt6PFJetsCentralNeutral_rho_*', # for zz muons
'*_photonCore_*_*',
'*_boostedFsrPhotons_*_*',
# for Zmumu -> embedded samples
# https://twiki.cern.ch/twiki/bin/view/CMS/MuonTauReplacementRecHit
'*_generalTracksORG_*_EmbeddedRECO',
'*_electronGsfTracksORG_*_EmbeddedRECO',
'double_TauSpinnerReco_TauSpinnerWT_EmbeddedSPIN',
'double_ZmumuEvtSelEffCorrWeightProducer_weight_EmbeddedRECO',
'double_muonRadiationCorrWeightProducer_weight_EmbeddedRECO',
'GenFilterInfo_generator_minVisPtFilter_EmbeddedRECO',
]
# Define our patTuple production sequence
process.tuplize = cms.Sequence()
# Only keep interesting genParticles
process.load("FinalStateAnalysis.RecoTools.genParticleTrimmer_cfi")
process.genParticles = process.prunedGenParticles.clone()
if isMC:
#process.tuplize += process.genParticles
#output_commands.append('*_genParticles_*_%s' % process.name_())
output_commands.append('*_genParticles_*_*')
output_commands.append('*_tauGenJetsSelectorAllHadrons_*_*')
output_commands.append('*_tauGenJets_*_*')
output_commands.append('*_ak5GenJets_*_*')
########################
## ##
## PAT ##
## ##
########################
# Run pat default sequence
process.load("PhysicsTools.PatAlgos.patSequences_cff")
# Embed PF Isolation in electrons & muons
pfTools.usePFIso(process)
# Setup H2Tau custom iso definitions
setup_h2tau_iso(process)
# Setup hZg custom iso definitions
add_hZg_iso_needs(process)
# Now run PAT
process.tuplize += process.patDefaultSequence
# Add FSR photons for ZZ analysis
process.load("FinalStateAnalysis.PatTools.fsrPhotons_cff")
process.tuplize += process.fsrPhotonSequence
########################
## GEN ##
########################
# Disable gen match embedding - we keep it in the ntuple
process.patMuons.embedGenMatch = False
process.patElectrons.embedGenMatch = False
process.patTaus.embedGenMatch = False
process.patTaus.embedGenJetMatch = False
process.patPhotons.embedGenMatch = False
if not isMC:
coreTools.runOnData(process)
########################
## MUONS ##
########################
# Unembed junk
process.patMuons.embedCaloMETMuonCorrs = False
process.patMuons.embedTcMETMuonCorrs = False
process.patMuons.embedTrack = True
process.patMuons.pvSrc = cms.InputTag("selectedPrimaryVertex")
process.load("FinalStateAnalysis.PatTools.patMuonProduction_cff")
final_muon_collection = chain_sequence(process.customizeMuonSequence,
"selectedPatMuons")
process.customizeMuonSequence.insert(0, process.selectedPatMuons)
process.patDefaultSequence.replace(process.selectedPatMuons,
process.customizeMuonSequence)
process.cleanPatMuons.src = final_muon_collection
process.patMuonRochesterCorrectionEmbedder.isMC = cms.bool(bool(isMC))
########################
## TAUS ##
########################
# Use HPS taus
tautools.switchToPFTauHPS(
process) #this NEEDS a sequence called patDefaultSequence
# Disable tau IsoDeposits
process.patDefaultSequence.remove(process.patPFTauIsolation)
process.patTaus.isoDeposits = cms.PSet()
process.patTaus.userIsolation = cms.PSet()
process.load("FinalStateAnalysis.PatTools.patTauProduction_cff")
# Require all taus to pass decay mode finding and have high PT
process.patTauGarbageRemoval.cut = cms.string(
"pt > 17 && abs(eta) < 2.5 && tauID('decayModeFindingNewDMs')")
final_tau_collection = chain_sequence(process.customizeTauSequence,
"selectedPatTaus")
# Inject into the pat sequence
process.customizeTauSequence.insert(0, process.selectedPatTaus)
process.patDefaultSequence.replace(process.selectedPatTaus,
process.customizeTauSequence)
process.cleanPatTaus.src = final_tau_collection
# Remove muons and electrons
process.cleanPatTaus.checkOverlaps.muons.requireNoOverlaps = False
process.cleanPatTaus.checkOverlaps.electrons.requireNoOverlaps = False
# Cuts already applied by the garbage removal
process.cleanPatTaus.preselection = ''
process.cleanPatTaus.finalCut = ''
########################
## ELECTRONS ##
########################
# Use POG recommendations for (these) electron Isos
process.elPFIsoValueGamma04PFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.08)')
process.elPFIsoValueGamma04NoPFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.08)')
process.elPFIsoValueCharged04PFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.015)')
process.elPFIsoValueCharged04NoPFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.015)')
# Do extra electron ID
process.load("FinalStateAnalysis.PatTools.electrons.electronID_cff")
if cmssw_major_version() == 4:
process.patDefaultSequence.replace(
process.patElectrons,
process.recoElectronID42X + process.patElectrons)
process.patElectrons.electronIDSources = process.electronIDSources42X
else:
process.patDefaultSequence.replace(
process.patElectrons,
process.recoElectronID5YX + process.patElectrons)
process.patElectrons.electronIDSources = process.electronIDSources5YX
process.electronMatch.checkCharge = cms.bool(False)
process.patElectrons.embedTrack = False
process.patElectrons.embedPFCandidate = False
process.patElectrons.embedGsfElectronCore = False
process.patElectrons.embedSuperCluster = True
# Produce the electron collections
process.load("FinalStateAnalysis.PatTools.patElectronProduction_cff")
# Electron Energy Regression and Calibrations
process.load(
"EgammaAnalysis.ElectronTools.electronRegressionEnergyProducer_cfi")
process.load("EgammaAnalysis.ElectronTools.calibratedPatElectrons_cfi")
#setup the energy regression for the specific dataset
if kwargs['eleReg']:
print "-- Applying Electron Regression and Calibration --"
process.customizeElectronSequence += process.eleRegressionEnergy
process.customizeElectronSequence += process.calibratedPatElectrons
process.eleRegressionEnergy.energyRegressionType = cms.uint32(2)
process.calibratedPatElectrons.correctionsType = cms.int32(2)
if isMC:
process.calibratedPatElectrons.inputDataset = cms.string(
"Summer12_LegacyPaper")
else:
process.calibratedPatElectrons.inputDataset = cms.string(
"22Jan2013ReReco")
process.calibratedPatElectrons.combinationType = cms.int32(3)
process.calibratedPatElectrons.lumiRatio = cms.double(1.0)
process.calibratedPatElectrons.synchronization = cms.bool(True)
process.calibratedPatElectrons.isMC = cms.bool(isMC == 1)
process.calibratedPatElectrons.verbose = cms.bool(False)
final_electron_collection = chain_sequence(
process.customizeElectronSequence,
"selectedPatElectrons",
# Some of the EGamma modules have non-standard src InputTags,
# specify them here.
("src", "inputPatElectronsTag", "inputElectronsTag"))
#process.tuplize += process.customizeElectronSequence #why do we need this?
process.customizeElectronSequence.insert(0, process.selectedPatElectrons)
process.patDefaultSequence.replace(process.selectedPatElectrons,
process.customizeElectronSequence)
# We have to do the pat Jets before the pat electrons since we embed them
process.customizeElectronSequence.insert(0, process.selectedPatJets)
# Define cleanPatElectrons input collection
process.cleanPatElectrons.src = final_electron_collection
# Define the default lepton cleaning
process.cleanPatElectrons.preselection = cms.string('pt > 5')
process.cleanPatElectrons.checkOverlaps.muons.requireNoOverlaps = False
# Make sure we don't kill any good taus by calling them electrons
# Note that we don't actually remove these overlaps.
process.cleanPatElectrons.checkOverlaps.taus = cms.PSet(
src=final_tau_collection,
algorithm=cms.string("byDeltaR"),
preselection=cms.string(
"tauID('decayModeFinding') > 0.5 &&"
"tauID('byLooseCombinedIsolationDeltaBetaCorr') > 0.5 &&"
"tauID('againstElectronLoose') > 0.5 && "
"pt > 10"),
deltaR=cms.double(0.1),
checkRecoComponents=cms.bool(False),
pairCut=cms.string(""),
requireNoOverlaps=cms.bool(False),
)
########################
## JETS ##
########################
# Use PFJets and turn on JEC
jec = ['L1FastJet', 'L2Relative', 'L3Absolute']
# If we are running on data (not MC), or embedded sample,
# apply the MC-DATA residual correction.
if not isMC or kwargs['embedded']:
jec.extend(['L2L3Residual'])
# tmp
# define the b-tag squences for offline reconstruction
process.load("RecoBTag.SecondaryVertex.secondaryVertex_cff")
process.load("RecoBTau.JetTagComputer.combinedMVA_cff")
process.load('RecoVertex/AdaptiveVertexFinder/inclusiveVertexing_cff')
process.load('RecoBTag/SecondaryVertex/bToCharmDecayVertexMerger_cfi')
#process.load("PhysicsTools.PatAlgos.patSequences_cff")
# Define options for BTagging - these are release dependent.
btag_options = {'doBTagging': True}
if cmssw_major_version() == 5:
btag_options['btagInfo'] = [
'impactParameterTagInfos', 'secondaryVertexTagInfos',
'softMuonTagInfos', 'secondaryVertexNegativeTagInfos',
'inclusiveSecondaryVertexFinderFilteredTagInfos'
]
btag_options['btagdiscriminators'] = [
'trackCountingHighEffBJetTags',
'trackCountingHighPurBJetTags',
'simpleSecondaryVertexHighEffBJetTags',
'simpleSecondaryVertexHighPurBJetTags',
'simpleInclusiveSecondaryVertexHighEffBJetTags',
'simpleInclusiveSecondaryVertexHighPurBJetTags',
'combinedSecondaryVertexMVABJetTags',
'combinedSecondaryVertexBJetTags',
'jetBProbabilityBJetTags',
'jetProbabilityBJetTags',
]
#Avoid embedding
process.patJets.embedPFCandidates = True
process.patJets.embedCaloTowers = False
process.patJets.embedGenJetMatch = True
process.patJets.addAssociatedTracks = True
process.patJets.embedGenPartonMatch = True
# Add AK5chs PFJets
jettools.addJetCollection(process,
cms.InputTag('ak5PFchsJets'),
algoLabel="AK5",
typeLabel="PFchs",
doJTA=True,
jetCorrLabel=('AK5PFchs', jec),
doType1MET=False,
doL1Cleaning=False,
doL1Counters=False,
genJetCollection=cms.InputTag('ak5GenJets'),
doJetID=True,
**btag_options)
# Use AK5 PFJets
jettools.switchJetCollection(
process,
cms.InputTag('ak5PFJets'),
doJTA=True,
jetCorrLabel=('AK5PF', jec),
#jetCorrLabel = None,
doType1MET=False,
doJetID=True,
genJetCollection=cms.InputTag("ak5GenJets"),
**btag_options)
# Customize/embed all our sequences
process.load("FinalStateAnalysis.PatTools.patJetProduction_cff")
helpers.cloneProcessingSnippet(process, process.customizeJetSequence,
'AK5PFchs')
process.patJetGarbageRemoval.cut = 'pt > 12'
final_jet_collection = chain_sequence(process.customizeJetSequence,
"patJets")
process.customizeJetSequence.insert(0, process.patJets)
# Make it a "complete" sequence
process.customizeJetSequence += process.selectedPatJets
# process.customizeJetSequence += process.btagging
# We can't mess up the selected pat jets because the taus use them.
process.selectedPatJets.src = final_jet_collection
process.patDefaultSequence.replace(process.patJets,
process.customizeJetSequence)
process.customizeJetSequenceAK5PFchs.remove(process.patJetsPUIDAK5PFchs)
process.customizeJetSequenceAK5PFchs.remove(
process.pileupJetIdProducerAK5PFchs)
process.patJetGarbageRemovalAK5PFchs.cut = 'pt > 20'
process.patJetCorrFactorsAK5PFchs.payload = cms.string('AK5PFchs')
final_jetchs_collection = chain_sequence(
process.customizeJetSequenceAK5PFchs, "patJetsAK5PFchs")
process.customizeJetSequenceAK5PFchs.insert(0, process.patJetsAK5PFchs)
# Make it a "complete" sequence
process.customizeJetSequenceAK5PFchs += process.selectedPatJetsAK5PFchs
# We can't mess up the selected pat jets because the taus use them.
process.selectedPatJetsAK5PFchs.src = final_jetchs_collection
process.selectedPatJetsAK5chsPF = process.selectedPatJetsAK5PFchs.clone(
) #that's what we keep
process.customizeJetSequenceAK5PFchs += process.selectedPatJetsAK5chsPF
process.patDefaultSequence.replace(process.patJetsAK5PFchs,
process.customizeJetSequenceAK5PFchs)
output_commands.append('*_selectedPatJets_*_*')
output_commands.append('*_selectedPatJetsAK5chsPF_*_*')
output_commands.append('*SecondaryVertexTagInfo*_*_*_*')
output_commands.append('*TrackIPTagInfo*_*_*_*')
output_commands.append('*SoftLeptonTagInfo*_*_*_*')
output_commands.append('*_ak5PFJets_*_*')
output_commands.append('*_ak5PFchsJets_*_*')
########################
## MET ##
########################
# Use PFMEt
mettools.addPfMET(process)
# We cut out a lot of the junky taus and jets - but we need these
# to correctly apply the MET uncertainties. So, let's make a
# non-cleaned version of the jet and tau sequence.
process.jetsForMetSyst = helpers.cloneProcessingSnippet(
process, process.customizeJetSequence, 'ForMETSyst')
process.tausForMetSyst = helpers.cloneProcessingSnippet(
process, process.customizeTauSequence, 'ForMETSyst')
# Don't apply any cut for these
process.patTauGarbageRemovalForMETSyst.cut = ''
process.patJetGarbageRemovalForMETSyst.cut = ''
process.tuplize += process.jetsForMetSyst
process.tuplize += process.tausForMetSyst
# We have to make our clone of cleanPatTaus separately, since e/mu
# cleaning is applied - therefore it isn't in the customizeTausSequence.
process.cleanPatTausForMETSyst = process.cleanPatTaus.clone(
src=cms.InputTag(process.cleanPatTaus.src.value() + "ForMETSyst"))
process.cleanPatTausForMETSyst.preselection = ''
process.cleanPatTausForMETSyst.finalCut = ''
process.patTausEmbedJetInfoForMETSyst.jetSrc = \
final_jet_collection.value() + "ForMETSyst"
process.tuplize += process.cleanPatTausForMETSyst
# Setup MET production
process.load("FinalStateAnalysis.PatTools.patMETProduction_cff")
# The MET systematics depend on all other systematics
process.systematicsMET.tauSrc = cms.InputTag("cleanPatTausForMETSyst")
process.systematicsMET.muonSrc = cms.InputTag("cleanPatMuons")
process.systematicsMET.electronSrc = cms.InputTag("cleanPatElectrons")
final_met_collection = chain_sequence(process.customizeMETSequence,
"patMETsPF")
process.tuplize += process.customizeMETSequence
process.patMETsPF.addGenMET = bool(isMC)
output_commands.append('*_%s_*_*' % final_met_collection.value())
# Make a version with the MVA MET reconstruction method
process.load("FinalStateAnalysis.PatTools.met.mvaMetOnPatTuple_cff")
process.tuplize += process.pfMEtMVAsequence
mva_met_sequence = helpers.cloneProcessingSnippet(
process, process.customizeMETSequence, "MVA")
final_mvamet_collection = chain_sequence(mva_met_sequence, "patMEtMVA")
process.tuplize += mva_met_sequence
output_commands.append('*_%s_*_*' % final_mvamet_collection.value())
# Keep all the data formats needed for the systematics
output_commands.append('recoLeafCandidates_*_*_%s' % process.name_())
# We can drop to jet and tau MET specific products. They were only used for
# computation of the MET numbers.
output_commands.append('drop recoLeafCandidates_*ForMETSyst_*_%s' %
process.name_())
########################
## PHOTONS ##
########################
#alter the photon matching to accept various fakes
# and sort matches by d-pt-rel
if isMC:
process.photonMatch = cms.EDProducer(
"MCMatcherByPt",
src=cms.InputTag("photons"),
maxDPtRel=cms.double(100.0),
mcPdgId=cms.vint32(),
mcStatus=cms.vint32(1),
resolveByMatchQuality=cms.bool(False),
maxDeltaR=cms.double(0.3),
checkCharge=cms.bool(False),
resolveAmbiguities=cms.bool(True),
matched=cms.InputTag("genParticles"))
# Setup pat::Photon Production
process.load("FinalStateAnalysis.PatTools.patPhotonProduction_cff")
final_photon_collection = chain_sequence(process.customizePhotonSequence,
"selectedPatPhotons")
#setup PHOSPHOR for a specific dataset
if cmssw_major_version() == 4: # for now 2011 = CMSSW42X
process.patPhotonPHOSPHOREmbedder.year = cms.uint32(2011)
else: # 2012 is 5YX
process.patPhotonPHOSPHOREmbedder.year = cms.uint32(2012)
process.patPhotonPHOSPHOREmbedder.isMC = cms.bool(bool(isMC))
#inject photons into pat sequence
process.customizePhotonSequence.insert(0, process.selectedPatPhotons)
process.patDefaultSequence.replace(process.selectedPatPhotons,
process.customizePhotonSequence)
process.cleanPatPhotons.src = final_photon_collection
########################
## TRIGGER ##
########################
trigtools.switchOnTrigger(process)
#configure the PAT trigger
if kwargs['HLTprocess']:
process.patTrigger.processName = cms.string(kwargs['HLTprocess'])
process.patTriggerEvent.processName = cms.string(kwargs['HLTprocess'])
########################
## -------------- ##
########################
output_commands.append('*_cleanPatTaus_*_*')
output_commands.append('*_cleanPatElectrons_*_*')
output_commands.append('*_cleanPatMuons_*_*')
output_commands.append('*_cleanPatPhotons_*_*')
########################
## ##
## FSA ##
## ##
########################
# Now build the PATFinalStateLS object, which holds LumiSection info.
process.load(
"FinalStateAnalysis.PatTools.finalStates.patFinalStateLSProducer_cfi")
process.tuplize += process.finalStateLS
output_commands.append('*_finalStateLS_*_*')
if isMC:
process.finalStateLS.xSec = kwargs['xSec']
# Tell the framework to shut up!
process.load("FWCore.MessageLogger.MessageLogger_cfi")
process.MessageLogger.cerr.FwkReport.reportEvery = 1000
# Which collections are used to build the final states
fs_daughter_inputs = {
'electrons': 'cleanPatElectrons',
'muons': 'cleanPatMuons',
'taus': 'cleanPatTaus',
'photons': 'cleanPatPhotons',
'jets': 'selectedPatJets',
'pfmet': final_met_collection,
'mvamet': final_mvamet_collection,
}
# Setup all the PATFinalState objects
produce_final_states(process,
fs_daughter_inputs,
output_commands,
process.tuplize,
kwargs['puTag'],
zzMode=kwargs.get('zzMode', False))
return process.tuplize, output_commands
def configurePatTuple(process, isMC=True, **kwargs):
# Stuff we always keep
output_commands = [
# '*',
'*_addPileupInfo_*_*',
'edmMergeableCounter_*_*_*',
'*_lumiProducer_*_*',
'*_particleFlow_*_*',
'*_offlineBeamSpot_*_*',
'*_generalTracks_*_*',
'*_electronGsfTracks_*_*',
'*_offlinePrimaryVertices*_*_*',
'*_ak5GenJets_*_*',
'*_hltTriggerSummaryAOD_*_*',
'edmTriggerResults_TriggerResults_*_%s' % process.name_(),
'*_MEtoEDMConverter*_*_%s' % process.name_(),
'LHEEventProduct_*_*_*',
'GenEventInfoProduct_generator_*_*',
'*_kt6PFJetsForRhoComputationVoronoi_rho_*',
'*_kt6PFJetsForIso_rho_*',
'*_kt6PFJets_rho_*',
'*_kt6PFJetsCentralHZGPho_rho_*',
'*_kt6PFJetsCentralHZGEle_rho_*',
'*_kt6PFJetsCentralHZGMu_rho_*',
'*_kt6PFJetsCentralNeutralHZGMu_rho_*',
'*_kt6PFJetsCentral_rho_*',
'*_kt6PFJetsCentralNeutral_rho_*', #for zz muons
'*_photonCore_*_*',
# for Zmumu -> embedded samples
'*_generator_weight_*', # 2k11
"GenFilterInfo_generator_minVisPtFilter_*", #2k12
'*_genDaughters_*_*',
'*_boosted*_*_*',
'*_tmfTracks_*_*',
]
# Define our patTuple production sequence
process.tuplize = cms.Sequence()
# Only keep interesting genParticles
process.load("FinalStateAnalysis.RecoTools.genParticleTrimmer_cfi")
process.genParticles = process.prunedGenParticles.clone()
if isMC:
#process.tuplize += process.genParticles
#output_commands.append('*_genParticles_*_%s' % process.name_())
output_commands.append('*_genParticles_*_*')
output_commands.append('*_tauGenJetsSelectorAllHadrons_*_*')
output_commands.append('*_tauGenJets_*_*')
output_commands.append('*_ak5GenJets_*_*')
# Select vertices
process.load("FinalStateAnalysis.RecoTools.vertexSelection_cff")
output_commands.append('*_selectedPrimaryVertex_*_*')
output_commands.append('*_selectPrimaryVerticesQuality_*_*')
process.tuplize += process.selectPrimaryVertices
# Run the ZZ recipe for rho
from RecoJets.JetProducers.kt4PFJets_cfi import kt4PFJets \
as zzCantDoAnythingRight
process.kt6PFJetsForIso = zzCantDoAnythingRight.clone(
rParam=cms.double(0.6),
doAreaFastjet=cms.bool(True),
doRhoFastjet=cms.bool(True),
Rho_EtaMax=cms.double(2.5),
Ghost_EtaMax=cms.double(2.5),
)
process.tuplize += process.kt6PFJetsForIso
# Standard services
process.load('Configuration.StandardSequences.Services_cff')
# tack on seeds for FSA PATTuple modules
add_fsa_random_seeds(process)
if cmssw_major_version() == 5 and cmssw_minor_version() >= 3:
process.load('Configuration.Geometry.GeometryIdeal_cff')
else:
process.load('Configuration.StandardSequences.GeometryIdeal_cff')
process.load('Configuration.StandardSequences.MagneticField_cff')
process.load(
'Configuration.StandardSequences.FrontierConditions_GlobalTag_cff')
# Rerun tau ID
if cmssw_major_version() == 4:
process.load("RecoTauTag.Configuration.RecoPFTauTag_cff")
# Optimization - remove PFTauTagInfo compatibility layer
process.recoTauClassicHPSSequence.remove(
process.pfRecoTauTagInfoProducer)
process.recoTauClassicHPSSequence.remove(
process.ak5PFJetTracksAssociatorAtVertex)
assert (process.combinatoricRecoTaus.modifiers[3].name.value() ==
'TTIworkaround')
del process.combinatoricRecoTaus.modifiers[3]
# Don't build junky taus below 19 GeV
process.combinatoricRecoTaus.builders[0].minPtToBuild = cms.double(17)
process.tuplize += process.recoTauClassicHPSSequence
else:
# We can run less tau stuff in 52, since HPS taus already built.
process.load("RecoTauTag.Configuration.updateHPSPFTaus_cff")
process.tuplize += process.updateHPSPFTaus
## Run rho computation. Only necessary in 42X
if cmssw_major_version() == 4:
from RecoJets.Configuration.RecoPFJets_cff import kt6PFJets
kt6PFJets.Rho_EtaMax = cms.double(4.4)
kt6PFJets.doRhoFastjet = True
process.kt6PFJets = kt6PFJets
process.tuplize += process.kt6PFJets
# In 4_X we have to rerun ak5PFJets with area computation enabled.
if cmssw_major_version() == 4:
process.load("RecoJets.Configuration.RecoPFJets_cff")
process.ak5PFJets.doAreaFastjet = True
process.tuplize += process.ak5PFJets
# Only keep the new ak5PFJets
output_commands.append('*_ak5PFJets_*_%s' % process.name_())
else:
# Just keep the normal ones
output_commands.append('*_ak5PFJets_*_*')
# In the embedded samples, we need to re-run the b-tagging
if kwargs['embedded']:
process.load('RecoBTag/Configuration/RecoBTag_cff')
process.load('RecoJets/JetAssociationProducers/ak5JTA_cff')
process.ak5JetTracksAssociatorAtVertex.jets = cms.InputTag("ak5PFJets")
process.ak5JetTracksAssociatorAtVertex.tracks = cms.InputTag(
"tmfTracks")
process.tuplize += process.ak5JetTracksAssociatorAtVertex
process.tuplize += process.btagging
# Run pat default sequence
process.load("PhysicsTools.PatAlgos.patSequences_cff")
# Embed PF Isolation in electrons & muons
pfTools.usePFIso(process)
# Setup H2Tau custom iso definitions
setup_h2tau_iso(process)
# Setup hZg custom iso definitions
add_hZg_iso_needs(process)
# Use POG recommendations for (these) electron Isos
process.elPFIsoValueGamma04PFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.08)')
process.elPFIsoValueGamma04NoPFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.08)')
process.elPFIsoValueCharged04PFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.015)')
process.elPFIsoValueCharged04NoPFIdPFIso.deposits[0].vetos = cms.vstring(
'EcalEndcaps:ConeVeto(0.015)')
# Unembed junk
process.patMuons.embedCaloMETMuonCorrs = False
process.patMuons.embedTcMETMuonCorrs = False
process.patMuons.embedTrack = True
process.patMuons.pvSrc = cms.InputTag("selectedPrimaryVertex")
# Do extra electron ID
process.load("FinalStateAnalysis.PatTools.electrons.electronID_cff")
process.tuplize += process.recoElectronID
process.patElectrons.electronIDSources = process.electronIDSources
process.patElectrons.embedTrack = True
# Now run PAT
process.tuplize += process.patDefaultSequence
# Add FSR photons for ZZ analysis
process.load("FinalStateAnalysis.PatTools.fsrPhotons_cff")
process.tuplize += process.fsrPhotonSequence
# Use HPS taus
tautools.switchToPFTauHPS(process)
# Disable tau IsoDeposits
process.patDefaultSequence.remove(process.patPFTauIsolation)
process.patTaus.isoDeposits = cms.PSet()
process.patTaus.userIsolation = cms.PSet()
# Disable gen match embedding - we keep it in the ntuple
process.patMuons.embedGenMatch = False
process.patElectrons.embedGenMatch = False
process.patTaus.embedGenMatch = False
process.patTaus.embedGenJetMatch = False
# Use PFJets and turn on JEC
jec = ['L1FastJet', 'L2Relative', 'L3Absolute']
# If we are running on data (not MC), or embedded sample,
# apply the MC-DATA residual correction.
if not isMC or kwargs['embedded']:
jec.extend(['L2L3Residual'])
# Define options for BTagging - these are release dependent.
btag_options = {'doBTagging': True}
if cmssw_major_version() == 5:
btag_options['btagInfo'] = [
'impactParameterTagInfos', 'secondaryVertexTagInfos',
'softMuonTagInfos', 'secondaryVertexNegativeTagInfos'
]
btag_options['btagdiscriminators'] = [
'trackCountingHighEffBJetTags',
'simpleSecondaryVertexHighEffBJetTags',
'combinedSecondaryVertexMVABJetTags',
'combinedSecondaryVertexBJetTags',
]
# Use AK5 PFJets
jettools.switchJetCollection(
process,
cms.InputTag('ak5PFJets'),
doJTA=False,
jetCorrLabel=('AK5PF', jec),
#jetCorrLabel = None,
doType1MET=False,
doJetID=True,
genJetCollection=cms.InputTag("ak5GenJets"),
**btag_options)
process.patJets.embedPFCandidates = False
process.patJets.embedCaloTowers = False
process.patJets.embedGenJetMatch = False
process.patJets.addAssociatedTracks = False
process.patJets.embedGenPartonMatch = False
#process.patJetCorrFactors.useRho = True
## Let's use the same rho as in the TauID, so we don't need to do it twice.
#process.patJetCorrFactors.rho = cms.InputTag(
#"kt6PFJetsForRhoComputationVoronoi", "rho")
# Use PFMEt
mettools.addPfMET(process)
if not isMC:
coreTools.runOnData(process)
process.patMETsPF.addGenMET = False
output_commands.append('*_selectedPatJets_*_*')
# Customize/embed all our sequences
process.load("FinalStateAnalysis.PatTools.patJetProduction_cff")
# We have to keep all jets (for the MVA MET...)
process.patJetGarbageRemoval.cut = 'pt > 0'
final_jet_collection = chain_sequence(process.customizeJetSequence,
"patJets")
process.customizeJetSequence.insert(0, process.patJets)
# Make it a "complete" sequence
process.customizeJetSequence += process.selectedPatJets
# We can't mess up the selected pat jets because the taus use them.
process.selectedPatJets.src = final_jet_collection
process.patDefaultSequence.replace(process.patJets,
process.customizeJetSequence)
# Produce the electron collections
process.load("FinalStateAnalysis.PatTools.patElectronProduction_cff")
final_electron_collection = chain_sequence(
process.customizeElectronSequence, "selectedPatElectrons")
process.tuplize += process.customizeElectronSequence
process.customizeElectronSequence.insert(0, process.selectedPatElectrons)
process.patDefaultSequence.replace(process.selectedPatElectrons,
process.customizeElectronSequence)
# We have to do the pat Jets before the pat electrons since we embed them
process.customizeElectronSequence.insert(0, process.selectedPatJets)
process.cleanPatElectrons.src = final_electron_collection
#setup the energy regression for the specific dataset
process.patElectronEnergyCorrections.isMC = cms.bool(bool(isMC))
process.patElectronEnergyCorrections.isAOD = \
cms.bool(bool(kwargs['isAOD']))
process.patElectronEnergyCorrections.dataSet = \
cms.string(kwargs['calibrationTarget'])
process.load("FinalStateAnalysis.PatTools.patMuonProduction_cff")
final_muon_collection = chain_sequence(process.customizeMuonSequence,
"selectedPatMuons")
process.customizeMuonSequence.insert(0, process.selectedPatMuons)
process.patDefaultSequence.replace(process.selectedPatMuons,
process.customizeMuonSequence)
process.cleanPatMuons.src = final_muon_collection
process.patMuonRochesterCorrectionEmbedder.isMC = cms.bool(bool(isMC))
process.load("FinalStateAnalysis.PatTools.patTauProduction_cff")
final_tau_collection = chain_sequence(process.customizeTauSequence,
"selectedPatTaus")
# Inject into the pat sequence
process.customizeTauSequence.insert(0, process.selectedPatTaus)
process.patDefaultSequence.replace(process.selectedPatTaus,
process.customizeTauSequence)
process.cleanPatTaus.src = final_tau_collection
# Remove muons and electrons
process.cleanPatTaus.checkOverlaps.muons.requireNoOverlaps = False
process.cleanPatTaus.checkOverlaps.electrons.requireNoOverlaps = False
# Apply a loose preselection
process.cleanPatTaus.preselection = 'abs(eta) < 2.5 & pt > 17'
# Don't apply any "final" cut
process.cleanPatTaus.finalCut = ''
# Setup pat::Photon Production
process.load("FinalStateAnalysis.PatTools.patPhotonProduction_cff")
final_photon_collection = chain_sequence(process.customizePhotonSequence,
"selectedPatPhotons")
#inject photons into pat sequence
process.customizePhotonSequence.insert(0, process.selectedPatPhotons)
process.patDefaultSequence.replace(process.selectedPatPhotons,
process.customizePhotonSequence)
process.cleanPatPhotons.src = final_photon_collection
# Setup MET production
process.load("FinalStateAnalysis.PatTools.patMETProduction_cff")
final_met_collection = chain_sequence(process.customizeMETSequence,
"patMETsPF")
process.tuplize += process.customizeMETSequence
# The MET systematics depend on all other systematics
process.systematicsMET.tauSrc = cms.InputTag("cleanPatTaus")
process.systematicsMET.muonSrc = cms.InputTag("cleanPatMuons")
process.systematicsMET.electronSrc = cms.InputTag("cleanPatElectrons")
# Keep all the data formats needed for the systematics
output_commands.append('recoLeafCandidates_*_*_%s' % process.name_())
# Define the default lepton cleaning
process.cleanPatElectrons.preselection = cms.string('pt > 5')
process.cleanPatElectrons.checkOverlaps.muons.requireNoOverlaps = False
# Make sure we don't kill any good taus by calling them electrons
# Note that we don't actually remove these overlaps.
process.cleanPatElectrons.checkOverlaps.taus = cms.PSet(
src=final_tau_collection,
algorithm=cms.string("byDeltaR"),
preselection=cms.string(
"tauID('decayModeFinding') > 0.5 &&"
"tauID('byLooseCombinedIsolationDeltaBetaCorr') > 0.5 &&"
"tauID('againstElectronLoose') > 0.5 && "
"pt > 10"),
deltaR=cms.double(0.1),
checkRecoComponents=cms.bool(False),
pairCut=cms.string(""),
requireNoOverlaps=cms.bool(False),
)
output_commands.append('*_cleanPatTaus_*_*')
output_commands.append('*_cleanPatElectrons_*_*')
output_commands.append('*_cleanPatMuons_*_*')
output_commands.append('*_cleanPatPhotons_*_*')
output_commands.append('*_%s_*_*' % final_met_collection.value())
trigtools.switchOnTrigger(process)
# Now build the PATFinalStateLS object, which holds LumiSection info.
process.load(
"FinalStateAnalysis.PatTools.finalStates.patFinalStateLSProducer_cfi")
process.tuplize += process.finalStateLS
output_commands.append('*_finalStateLS_*_*')
if isMC:
process.finalStateLS.xSec = kwargs['xSec']
# Tell the framework to shut up!
process.load("FWCore.MessageLogger.MessageLogger_cfi")
process.MessageLogger.cerr.FwkReport.reportEvery = 1000
# Which collections are used to build the final states
fs_daughter_inputs = {
'electrons': 'cleanPatElectrons',
'muons': 'cleanPatMuons',
'taus': 'cleanPatTaus',
'photons': 'cleanPatPhotons',
'jets': 'selectedPatJets',
'met': final_met_collection,
}
# Setup all the PATFinalState objects
produce_final_states(process, fs_daughter_inputs, output_commands,
process.tuplize, kwargs['puTag'])
return process.tuplize, output_commands
