def __getDebugGroupbox(self):
" Creates the debug settings groupbox "
dbgGroupbox = QGroupBox(self)
dbgGroupbox.setTitle("Debugger")
sizePolicy = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
dbgGroupbox.sizePolicy().hasHeightForWidth())
dbgGroupbox.setSizePolicy(sizePolicy)
dbgLayout = QVBoxLayout(dbgGroupbox)
self.__reportExceptionCheckBox = QCheckBox("Report &exceptions")
self.__reportExceptionCheckBox.stateChanged.connect(
self.__onReportExceptionChanged)
self.__traceInterpreterCheckBox = QCheckBox("T&race interpreter libs")
self.__traceInterpreterCheckBox.stateChanged.connect(
self.__onTraceInterpreterChanged)
self.__stopAtFirstCheckBox = QCheckBox("Stop at first &line")
self.__stopAtFirstCheckBox.stateChanged.connect(
self.__onStopAtFirstChanged)
self.__autoforkCheckBox = QCheckBox("&Fork without asking")
self.__autoforkCheckBox.stateChanged.connect(self.__onAutoforkChanged)
self.__debugChildCheckBox = QCheckBox("Debu&g child process")
self.__debugChildCheckBox.stateChanged.connect(self.__onDebugChild)
dbgLayout.addWidget(self.__reportExceptionCheckBox)
dbgLayout.addWidget(self.__traceInterpreterCheckBox)
dbgLayout.addWidget(self.__stopAtFirstCheckBox)
dbgLayout.addWidget(self.__autoforkCheckBox)
dbgLayout.addWidget(self.__debugChildCheckBox)
return dbgGroupbox
def __getProfileLimitsGroupbox(self):
" Creates the profile limits groupbox "
limitsGroupbox = QGroupBox(self)
limitsGroupbox.setTitle("Profiler diagram limits")
sizePolicy = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
limitsGroupbox.sizePolicy().hasHeightForWidth())
limitsGroupbox.setSizePolicy(sizePolicy)
layoutLimits = QGridLayout(limitsGroupbox)
self.__nodeLimitEdit = QLineEdit()
self.__nodeLimitEdit.textEdited.connect(self.__setRunButtonProps)
self.__nodeLimitValidator = QDoubleValidator(0.0, 100.0, 2, self)
self.__nodeLimitValidator.setNotation(
QDoubleValidator.StandardNotation)
self.__nodeLimitEdit.setValidator(self.__nodeLimitValidator)
nodeLimitLabel = QLabel("Hide nodes below")
self.__edgeLimitEdit = QLineEdit()
self.__edgeLimitEdit.textEdited.connect(self.__setRunButtonProps)
self.__edgeLimitValidator = QDoubleValidator(0.0, 100.0, 2, self)
self.__edgeLimitValidator.setNotation(
QDoubleValidator.StandardNotation)
self.__edgeLimitEdit.setValidator(self.__edgeLimitValidator)
edgeLimitLabel = QLabel("Hide edges below")
layoutLimits.addWidget(nodeLimitLabel, 0, 0)
layoutLimits.addWidget(self.__nodeLimitEdit, 0, 1)
layoutLimits.addWidget(QLabel("%"), 0, 2)
layoutLimits.addWidget(edgeLimitLabel, 1, 0)
layoutLimits.addWidget(self.__edgeLimitEdit, 1, 1)
layoutLimits.addWidget(QLabel("%"), 1, 2)
return limitsGroupbox
def __init__(self,resource_name,parent=None):
super().__init__(parent)
self.inst = HP54616B(resource_name)
self.inst.initialize()
self.timer = QTimer(self)
self.timer.setSingleShot(True)
self.timer.timeout.connect(self.refresh)
self.ui = Ui_main_window()
self.ui.setupUi(self)
connect_driver(self,self.inst)
self.channelControls = []
for channel in self.inst.channels:
chan = QGroupBox()
self.channelControls.append(chan)
chan.n = channel
chan_ui = Ui_channel_controls()
chan_ui.setupUi(chan)
chan.setTitle('Channel {:d}'.format(channel))
connect_feat(chan_ui.range, self.inst, 'range', channel)
connect_feat(chan_ui.offset, self.inst, 'offset', channel)
connect_feat(chan_ui.visible, self.inst, 'visible', channel)
self.ui.controlBox.addWidget(chan)
self.figure = Figure()
self.figureCanvas = FigureCanvasQTAgg(self.figure)
self.ui.plotBox.addWidget(self.figureCanvas)
self.axes = self.figure.add_subplot(111)
self.ui.plot.clicked.connect(self.refresh)
self.ui.save.clicked.connect(self.save)
self.ui.checkMosaic.stateChanged.connect(self.setMosaic)
self.ui.refreshAuto.clicked.connect(self.refreshConfig)
self.plotDelay = self.findChild((QWidget,),'refreshDelay')
self.mosaic = False
def __getIDEWideGroupbox(self):
" Creates the IDE wide groupbox "
ideGroupbox = QGroupBox(self)
ideGroupbox.setTitle("IDE Wide Settings")
sizePolicy = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
ideGroupbox.sizePolicy().hasHeightForWidth())
ideGroupbox.setSizePolicy(sizePolicy)
layoutIDE = QHBoxLayout(ideGroupbox)
termGroupbox = self.__getTermGroupbox()
termGroupbox.setTitle("Terminal to run in")
layoutIDE.addWidget(termGroupbox)
if self.__action == "profile":
# Profile version of the dialog
limitsGroupbox = self.__getProfileLimitsGroupbox()
layoutIDE.addWidget(limitsGroupbox)
else:
# Debug version of the dialog
dbgGroupbox = self.__getDebugGroupbox()
layoutIDE.addWidget(dbgGroupbox)
return ideGroupbox
def __getProfileLimitsGroupbox( self ):
" Creates the profile limits groupbox "
limitsGroupbox = QGroupBox( self )
limitsGroupbox.setTitle( "Profiler diagram limits" )
sizePolicy = QSizePolicy( QSizePolicy.Expanding, QSizePolicy.Preferred )
sizePolicy.setHorizontalStretch( 0 )
sizePolicy.setVerticalStretch( 0 )
sizePolicy.setHeightForWidth(
limitsGroupbox.sizePolicy().hasHeightForWidth() )
limitsGroupbox.setSizePolicy( sizePolicy )
layoutLimits = QGridLayout( limitsGroupbox )
self.__nodeLimitEdit = QLineEdit()
self.__nodeLimitEdit.textEdited.connect( self.__setRunButtonProps )
self.__nodeLimitValidator = QDoubleValidator( 0.0, 100.0, 2, self )
self.__nodeLimitValidator.setNotation( QDoubleValidator.StandardNotation )
self.__nodeLimitEdit.setValidator( self.__nodeLimitValidator )
nodeLimitLabel = QLabel( "Hide nodes below" )
self.__edgeLimitEdit = QLineEdit()
self.__edgeLimitEdit.textEdited.connect( self.__setRunButtonProps )
self.__edgeLimitValidator = QDoubleValidator( 0.0, 100.0, 2, self )
self.__edgeLimitValidator.setNotation( QDoubleValidator.StandardNotation )
self.__edgeLimitEdit.setValidator( self.__edgeLimitValidator )
edgeLimitLabel = QLabel( "Hide edges below" )
layoutLimits.addWidget( nodeLimitLabel, 0, 0 )
layoutLimits.addWidget( self.__nodeLimitEdit, 0, 1 )
layoutLimits.addWidget( QLabel( "%" ), 0, 2 )
layoutLimits.addWidget( edgeLimitLabel, 1, 0 )
layoutLimits.addWidget( self.__edgeLimitEdit, 1, 1 )
layoutLimits.addWidget( QLabel( "%" ), 1, 2 )
return limitsGroupbox
def __getIDEWideGroupbox( self ):
" Creates the IDE wide groupbox "
ideGroupbox = QGroupBox( self )
ideGroupbox.setTitle( "IDE Wide Settings" )
sizePolicy = QSizePolicy( QSizePolicy.Expanding, QSizePolicy.Preferred )
sizePolicy.setHorizontalStretch( 0 )
sizePolicy.setVerticalStretch( 0 )
sizePolicy.setHeightForWidth(
ideGroupbox.sizePolicy().hasHeightForWidth() )
ideGroupbox.setSizePolicy( sizePolicy )
layoutIDE = QHBoxLayout( ideGroupbox )
termGroupbox = self.__getTermGroupbox()
termGroupbox.setTitle( "Terminal to run in" )
layoutIDE.addWidget( termGroupbox )
if self.__action == "profile":
# Profile version of the dialog
limitsGroupbox = self.__getProfileLimitsGroupbox()
layoutIDE.addWidget( limitsGroupbox )
else:
# Debug version of the dialog
dbgGroupbox = self.__getDebugGroupbox()
layoutIDE.addWidget( dbgGroupbox )
return ideGroupbox
def __getDebugGroupbox( self ):
" Creates the debug settings groupbox "
dbgGroupbox = QGroupBox( self )
dbgGroupbox.setTitle( "Debugger" )
sizePolicy = QSizePolicy( QSizePolicy.Expanding, QSizePolicy.Preferred )
sizePolicy.setHorizontalStretch( 0 )
sizePolicy.setVerticalStretch( 0 )
sizePolicy.setHeightForWidth(
dbgGroupbox.sizePolicy().hasHeightForWidth() )
dbgGroupbox.setSizePolicy( sizePolicy )
dbgLayout = QVBoxLayout( dbgGroupbox )
self.__reportExceptionCheckBox = QCheckBox( "Report &exceptions" )
self.__reportExceptionCheckBox.stateChanged.connect(
self.__onReportExceptionChanged )
self.__traceInterpreterCheckBox = QCheckBox( "T&race interpreter libs" )
self.__traceInterpreterCheckBox.stateChanged.connect(
self.__onTraceInterpreterChanged )
self.__stopAtFirstCheckBox = QCheckBox( "Stop at first &line" )
self.__stopAtFirstCheckBox.stateChanged.connect(
self.__onStopAtFirstChanged )
self.__autoforkCheckBox = QCheckBox( "&Fork without asking" )
self.__autoforkCheckBox.stateChanged.connect(self.__onAutoforkChanged )
self.__debugChildCheckBox = QCheckBox( "Debu&g child process" )
self.__debugChildCheckBox.stateChanged.connect( self.__onDebugChild )
dbgLayout.addWidget( self.__reportExceptionCheckBox )
dbgLayout.addWidget( self.__traceInterpreterCheckBox )
dbgLayout.addWidget( self.__stopAtFirstCheckBox )
dbgLayout.addWidget( self.__autoforkCheckBox )
dbgLayout.addWidget( self.__debugChildCheckBox )
return dbgGroupbox
def buildAntispam(self, layout, row, col):
antispam = QGroupBox(self)
antispam.setTitle(tr('Antispam'))
antispam_layout = QFormLayout(antispam)
antispam_enable = QCheckBox()
info = QLabel(tr("This will add an <code>X-Spam-Score:</code> header "
"field to all the messages and add a <code>Subject:</code> line "
"beginning with *<i>SPAM</i>* and containing the original subject "
"to the messages detected as spam."))
info.setWordWrap(True)
antispam_layout.addRow(info)
antispam_layout.addRow(tr('Activate the antispam'), antispam_enable)
mark_spam_level = QDoubleSpinBox(self)
mark_spam_level.setDecimals(1)
antispam_layout.addRow(tr('Mark the message as spam if its score is greater than'), mark_spam_level)
deny_spam_level = QDoubleSpinBox(self)
deny_spam_level.setDecimals(1)
antispam_layout.addRow(tr('Refuse the message if its score is greater than'), deny_spam_level)
# enable/disable spam levels
self.connect(antispam_enable, SIGNAL('toggled(bool)'), mark_spam_level.setEnabled)
self.connect(antispam_enable, SIGNAL('toggled(bool)'), deny_spam_level.setEnabled)
# update config
self.connect(mark_spam_level, SIGNAL('valueChanged(double)'), self.setMarkSpamLevel)
self.connect(deny_spam_level, SIGNAL('valueChanged(double)'), self.setDenySpamLevel)
self.connect(antispam_enable, SIGNAL('clicked(bool)'), self.setAntispamEnabled)
layout.addWidget(antispam, row, col)
self.mainwindow.writeAccessNeeded(mark_spam_level, deny_spam_level)
return antispam_enable, mark_spam_level, deny_spam_level
def buildGui(self):
layout = QFormLayout(self)
self.is_default = False
self.setTitle(tr("Route specification"))
self.setSubTitle(tr("Specify a route"))
self.network = NetworkCombo(parent=self, modelname=MODEL_NETWORKS_EXCL_HA)
layout.addRow(tr("Network :"), self.network)
dst_group = QGroupBox()
layout.addRow(dst_group)
dst_group.setTitle(tr("Route parameters"))
form = QGridLayout(dst_group)
self.destination = NetworkEdit()
self.gateway = IpEdit()
self.registerField("destination", self.destination)
form.addWidget(QLabel(tr("Destination")), 0, 0)
form.addWidget(self.destination, 0, 1)
self.connect(self.gateway, SIGNAL('textChanged(QString)'), self.ifCompleteChanged)
self.connect(self.destination, SIGNAL('textChanged(QString)'), self.ifCompleteChanged)
build_default = QPushButton(tr("Build a default route"))
form.addWidget(build_default, 0, 2)
self.connect(build_default, SIGNAL('clicked()'), self.setDefaultRoute)
self.registerField("gateway", self.gateway)
form.addWidget(QLabel(tr("Gateway")), 2, 0)
form.addWidget(self.gateway, 2, 1)
self.message = Help()
form.addWidget(self.message, 3, 0, 1, 3)
def buildAntivirus(self, layout, row, col):
antivirus = QGroupBox(self)
antivirus.setTitle(tr('Antivirus'))
antivirus_layout = QFormLayout(antivirus)
antivirus_enable = QCheckBox()
antivirus_layout.addRow(tr('Enable antivirus'), antivirus_enable)
self.connect(antivirus_enable, SIGNAL('clicked(bool)'), self.setAntivirusEnabled)
layout.addWidget(antivirus, row, col)
return antivirus_enable
def buildPostProcessorForm(self, theParams):
"""Build Post Processor Tab
Args:
* theParams - dictionary containing element of form
Returns:
not applicable
"""
# create postprocessors tab
myTab = QWidget()
myFormLayout = QFormLayout(myTab)
myFormLayout.setLabelAlignment(Qt.AlignLeft)
self.tabWidget.addTab(myTab, self.tr('Postprocessors'))
self.tabWidget.tabBar().setVisible(True)
# create element for the tab
myValues = {}
for myLabel, myOptions in theParams.items():
myInputValues = {}
# NOTE (gigih) : 'params' is assumed as dictionary
if 'params' in myOptions:
myGroupBox = QGroupBox()
myGroupBox.setCheckable(True)
myGroupBox.setTitle(get_postprocessor_human_name(myLabel))
# NOTE (gigih): is 'on' always exist??
myGroupBox.setChecked(myOptions.get('on'))
myInputValues['on'] = self.bind(myGroupBox, 'checked', bool)
myLayout = QFormLayout(myGroupBox)
myGroupBox.setLayout(myLayout)
# create widget element from 'params'
myInputValues['params'] = {}
for myKey, myValue in myOptions['params'].items():
myHumanName = get_postprocessor_human_name(myKey)
myInputValues['params'][myKey] = self.buildWidget(
myLayout, myHumanName, myValue)
myFormLayout.addRow(myGroupBox, None)
elif 'on' in myOptions:
myCheckBox = QCheckBox()
myCheckBox.setText(get_postprocessor_human_name(myLabel))
myCheckBox.setChecked(myOptions['on'])
myInputValues['on'] = self.bind(myCheckBox, 'checked', bool)
myFormLayout.addRow(myCheckBox, None)
else:
raise NotImplementedError('This case is not handled for now')
myValues[myLabel] = myInputValues
self.values['postprocessors'] = myValues
def buildPostProcessorForm(self, theParams):
"""Build Post Processor Tab
Args:
* theParams - dictionary containing element of form
Returns:
not applicable
"""
# create postprocessors tab
myTab = QWidget()
myFormLayout = QFormLayout(myTab)
myFormLayout.setLabelAlignment(Qt.AlignLeft)
self.tabWidget.addTab(myTab, self.tr('Postprocessors'))
self.tabWidget.tabBar().setVisible(True)
# create element for the tab
myValues = {}
for myLabel, myOptions in theParams.items():
myInputValues = {}
# NOTE (gigih) : 'params' is assumed as dictionary
if 'params' in myOptions:
myGroupBox = QGroupBox()
myGroupBox.setCheckable(True)
myGroupBox.setTitle(get_postprocessor_human_name(myLabel))
# NOTE (gigih): is 'on' always exist??
myGroupBox.setChecked(myOptions.get('on'))
myInputValues['on'] = self.bind(myGroupBox, 'checked', bool)
myLayout = QFormLayout(myGroupBox)
myGroupBox.setLayout(myLayout)
# create widget element from 'params'
myInputValues['params'] = {}
for myKey, myValue in myOptions['params'].items():
myHumanName = get_postprocessor_human_name(myKey)
myInputValues['params'][myKey] = self.buildWidget(
myLayout, myHumanName, myValue)
myFormLayout.addRow(myGroupBox, None)
elif 'on' in myOptions:
myCheckBox = QCheckBox()
myCheckBox.setText(get_postprocessor_human_name(myLabel))
myCheckBox.setChecked(myOptions['on'])
myInputValues['on'] = self.bind(myCheckBox, 'checked', bool)
myFormLayout.addRow(myCheckBox, None)
else:
raise NotImplementedError('This case is not handled for now')
myValues[myLabel] = myInputValues
self.values['postprocessors'] = myValues
class Score(_base.Group, scoreproperties.ScoreProperties):
@staticmethod
def title(_=_base.translate):
return _("Score")
def createWidgets(self, layout):
self.pieceLabel = QLabel()
self.piece = QLineEdit()
self.pieceLabel.setBuddy(self.piece)
self.opusLabel = QLabel()
self.opus = QLineEdit()
self.opusLabel.setBuddy(self.opus)
self.scoreProps = QGroupBox(checkable=True, checked=False)
scoreproperties.ScoreProperties.createWidgets(self)
grid = QGridLayout()
grid.addWidget(self.pieceLabel, 0, 0)
grid.addWidget(self.piece, 0, 1)
grid.addWidget(self.opusLabel, 1, 0)
grid.addWidget(self.opus, 1, 1)
layout.addLayout(grid)
layout.addWidget(self.scoreProps)
layout = QVBoxLayout()
self.scoreProps.setLayout(layout)
scoreproperties.ScoreProperties.layoutWidgets(self, layout)
scorewiz = self.scoreProps.window()
self.setPitchLanguage(scorewiz.pitchLanguage())
scorewiz.pitchLanguageChanged.connect(self.setPitchLanguage)
def translateWidgets(self):
self.pieceLabel.setText(_("Piece:"))
self.opusLabel.setText(_("Opus:"))
self.scoreProps.setTitle(_("Properties"))
scoreproperties.ScoreProperties.translateWidgets(self)
def accepts(self):
return (StaffGroup, _base.Part)
def makeNode(self, node):
score = ly.dom.Score(node)
h = ly.dom.Header()
piece = self.piece.text().strip()
opus = self.opus.text().strip()
if piece:
h['piece'] = ly.dom.QuotedString(piece)
if opus:
h['opus'] = ly.dom.QuotedString(opus)
if len(h):
score.append(h)
return score
def globalSection(self, builder):
if self.scoreProps.isChecked():
return scoreproperties.ScoreProperties.globalSection(self, builder)
class Score(_base.Group, scoreproperties.ScoreProperties):
@staticmethod
def title(_=_base.translate):
return _("Score")
def createWidgets(self, layout):
self.pieceLabel = QLabel()
self.piece = QLineEdit()
self.pieceLabel.setBuddy(self.piece)
self.opusLabel = QLabel()
self.opus = QLineEdit()
self.opusLabel.setBuddy(self.opus)
self.scoreProps = QGroupBox(checkable=True, checked=False)
scoreproperties.ScoreProperties.createWidgets(self)
grid = QGridLayout()
grid.addWidget(self.pieceLabel, 0 ,0)
grid.addWidget(self.piece, 0, 1)
grid.addWidget(self.opusLabel, 1, 0)
grid.addWidget(self.opus, 1, 1)
layout.addLayout(grid)
layout.addWidget(self.scoreProps)
layout = QVBoxLayout()
self.scoreProps.setLayout(layout)
scoreproperties.ScoreProperties.layoutWidgets(self, layout)
scorewiz = self.scoreProps.window()
self.setPitchLanguage(scorewiz.pitchLanguage())
scorewiz.pitchLanguageChanged.connect(self.setPitchLanguage)
def translateWidgets(self):
self.pieceLabel.setText(_("Piece:"))
self.opusLabel.setText(_("Opus:"))
self.scoreProps.setTitle(_("Properties"))
scoreproperties.ScoreProperties.translateWidgets(self)
def accepts(self):
return (StaffGroup, _base.Part)
def makeNode(self, node):
score = ly.dom.Score(node)
h = ly.dom.Header()
piece = self.piece.text().strip()
opus = self.opus.text().strip()
if piece:
h['piece'] = ly.dom.QuotedString(piece)
if opus:
h['opus'] = ly.dom.QuotedString(opus)
if len(h):
score.append(h)
return score
def globalSection(self, builder):
if self.scoreProps.isChecked():
return scoreproperties.ScoreProperties.globalSection(self, builder)
def build_post_processor_form(self, parameters):
"""Build Post Processor Tab.
:param parameters: A Dictionary containing element of form
:type parameters: dict
"""
# create postprocessors tab
tab = QWidget()
form_layout = QFormLayout(tab)
form_layout.setLabelAlignment(Qt.AlignLeft)
self.tabWidget.addTab(tab, self.tr('Postprocessors'))
self.tabWidget.tabBar().setVisible(True)
# create element for the tab
values = OrderedDict()
for label, options in parameters.items():
input_values = OrderedDict()
# NOTE (gigih) : 'params' is assumed as dictionary
if 'params' in options:
group_box = QGroupBox()
group_box.setCheckable(True)
group_box.setTitle(get_postprocessor_human_name(label))
# NOTE (gigih): is 'on' always exist??
# (MB) should always be there
group_box.setChecked(options.get('on'))
input_values['on'] = self.bind(group_box, 'checked', bool)
layout = QFormLayout(group_box)
group_box.setLayout(layout)
# create widget element from 'params'
input_values['params'] = OrderedDict()
for key, value in options['params'].items():
input_values['params'][key] = self.build_widget(
layout, key, value)
form_layout.addRow(group_box, None)
elif 'on' in options:
checkbox = QCheckBox()
checkbox.setText(get_postprocessor_human_name(label))
checkbox.setChecked(options['on'])
input_values['on'] = self.bind(checkbox, 'checked', bool)
form_layout.addRow(checkbox, None)
else:
raise NotImplementedError('This case is not handled for now')
values[label] = input_values
self.values['postprocessors'] = values
def build_post_processor_form(self, parameters):
"""Build Post Processor Tab.
:param parameters: A Dictionary containing element of form
:type parameters: dict
"""
# create postprocessors tab
tab = QWidget()
form_layout = QFormLayout(tab)
form_layout.setLabelAlignment(Qt.AlignLeft)
self.tabWidget.addTab(tab, self.tr('Postprocessors'))
self.tabWidget.tabBar().setVisible(True)
# create element for the tab
values = OrderedDict()
for label, options in parameters.items():
input_values = OrderedDict()
# NOTE (gigih) : 'params' is assumed as dictionary
if 'params' in options:
group_box = QGroupBox()
group_box.setCheckable(True)
group_box.setTitle(get_postprocessor_human_name(label))
# NOTE (gigih): is 'on' always exist??
# (MB) should always be there
group_box.setChecked(options.get('on'))
input_values['on'] = self.bind(group_box, 'checked', bool)
layout = QFormLayout(group_box)
group_box.setLayout(layout)
# create widget element from 'params'
input_values['params'] = OrderedDict()
for key, value in options['params'].items():
input_values['params'][key] = self.build_widget(
layout, key, value)
form_layout.addRow(group_box, None)
elif 'on' in options:
checkbox = QCheckBox()
checkbox.setText(get_postprocessor_human_name(label))
checkbox.setChecked(options['on'])
input_values['on'] = self.bind(checkbox, 'checked', bool)
form_layout.addRow(checkbox, None)
else:
raise NotImplementedError('This case is not handled for now')
values[label] = input_values
self.values['postprocessors'] = values
def _parseDict(self, config, ui):
l = QVBoxLayout()
lst = list(config.keys())
for k in lst:
t = type(config[k])
if t == type(int()):
hbox = QHBoxLayout()
label = QLabel(k)
edit = QLineEdit(str(config[k]))
val = QIntValidator(self)
edit.setValidator(val)
hbox.addWidget(label)
hbox.addWidget(edit)
l.addLayout(hbox)
ui[k] = (edit, label, hbox, val)
elif t == type(float()):
hbox = QHBoxLayout()
label = QLabel(k)
edit = QLineEdit(str(config[k]))
val = QDoubleValidator(self)
edit.setValidator(val)
hbox.addWidget(label)
hbox.addWidget(edit)
l.addLayout(hbox)
ui[k] = (edit, label, hbox, val)
elif t == type(list()):
hbox = QHBoxLayout()
label = QLabel(k)
edit = QComboBox()
i = 0
for s in config[k][0]:
edit.addItem(s)
if i == config[k][1]:
edit.setCurrentIndex(i)
i += 1
hbox.addWidget(label)
hbox.addWidget(edit)
l.addLayout(hbox)
ui[k] = (edit, label, hbox)
elif t == type(dict()):
gbox = QGroupBox()
gbox.setTitle(k)
ui[k] = {"gbox": gbox}
l2 = self._parseDict(config[k], ui[k])
ui[k]["layout"] = l2
gbox.setLayout(l2)
l.addWidget(gbox)
return l
def _parseDict(self, config, ui):
l = QVBoxLayout()
lst = list(config.keys())
for k in lst:
t = type(config[k])
if t == type(int()):
hbox = QHBoxLayout()
label = QLabel(k)
edit = QLineEdit(str(config[k]))
val = QIntValidator(self)
edit.setValidator(val)
hbox.addWidget(label)
hbox.addWidget(edit)
l.addLayout(hbox)
ui[k] = (edit, label, hbox, val)
elif t == type(float()):
hbox = QHBoxLayout()
label = QLabel(k)
edit = QLineEdit(str(config[k]))
val = QDoubleValidator(self)
edit.setValidator(val)
hbox.addWidget(label)
hbox.addWidget(edit)
l.addLayout(hbox)
ui[k] = (edit, label, hbox, val)
elif t == type(list()):
hbox = QHBoxLayout()
label = QLabel(k)
edit = QComboBox()
i = 0
for s in config[k][0]:
edit.addItem(s)
if i == config[k][1]:
edit.setCurrentIndex(i)
i += 1
hbox.addWidget(label)
hbox.addWidget(edit)
l.addLayout(hbox)
ui[k] = (edit, label, hbox)
elif t == type(dict()):
gbox = QGroupBox()
gbox.setTitle(k)
ui[k] = {"gbox":gbox}
l2 = self._parseDict(config[k], ui[k])
ui[k]["layout"] = l2
gbox.setLayout(l2)
l.addWidget(gbox)
return l
def buildAdminMail(self, layout, row, col):
admin_mail = QGroupBox(self)
admin_mail.setTitle(tr("Administrator email address"))
admin_mail_layout = QGridLayout(admin_mail)
admin_mail_info = QLabel(tr("Administrator email address (EdenWall will send the system alerts to this address)"))
admin_mail_info.setWordWrap(True)
admin_mail_edit = MailEdit()
admin_mail_edit.setMinimumWidth(admin_mail_edit.fontMetrics().averageCharWidth() * 15)
admin_mail_edit.setMaximumWidth(admin_mail_edit.fontMetrics().averageCharWidth() * 45)
admin_mail_layout.addWidget(admin_mail_info, 0, 0)
admin_mail_layout.addWidget(admin_mail_edit, 1, 0)
admin_mail_layout.addItem(QSpacerItem(0, 0, QSizePolicy.Expanding, QSizePolicy.Minimum) , 2, 0)
self.connect(admin_mail_edit, SIGNAL('textEdited(QString)'), self.setAdminMail)
layout.addWidget(admin_mail, row, col)
self.mainwindow.writeAccessNeeded(admin_mail_info, admin_mail_edit)
return admin_mail_edit
def buildChooseLanguage(self, layout, row, col):
language = QGroupBox(self)
language.setTitle(tr('Language for emails'))
language_layout = QGridLayout(language)
language_info = QLabel(tr('Language for emails sent by EdenWall to the Administrator'))
language_info.setWordWrap(True)
language_choose = QComboBox()
for name in ContactConf.CODE_TO_NAME.itervalues():
language_choose.addItem(name)
language_layout.addWidget(language_info, 0, 0, 1, 0)
language_layout.addWidget(language_choose, 1, 0)
language_layout.addItem(QSpacerItem(0, 0, QSizePolicy.Expanding, QSizePolicy.Minimum) , 1, 1)
self.connect(language_choose, SIGNAL('activated(QString)'), self.setLanguage)
layout.addWidget(language, row, col)
self.mainwindow.writeAccessNeeded(language_info, language_choose)
return language_choose
def buildOutgoing(self, layout, row, col):
outgoing = QGroupBox(self)
outgoing.setTitle(tr('Outgoing emails'))
outgoing_layout = QGridLayout(outgoing)
relayed_net = NetworkListEdit(self)
relayed_net.setMaximumHeight(relayed_net.fontMetrics().height() * 5)
self.connect(relayed_net, SIGNAL("textChanged()"), self.setMailModified)
outgoing_layout.addWidget(QLabel(tr('Networks for which EdenWall relays emails')), 0, 0)
outgoing_layout.addWidget(relayed_net, 1, 0, 1, 2)
outgoing_layout.addWidget(QLabel(tr(
"""If outgoing mail should be relayed through a 'smarthost', configure this host in the "Contact" page of the "Services" tab."""
)))
layout.addWidget(outgoing, row, col)
return relayed_net
def buildTestMail(self, layout, row, col):
test = QGroupBox(self)
test.setTitle(tr('Test for emails'))
test_layout = QGridLayout(test)
test_info = QLabel(tr(
"To check the configuration, you can send a test "
"email to your contact email address. Be sure to configure the "
"smarthost in the Mail page if needed."
))
test_info.setWordWrap(True)
test_button = Button(text=tr('Send test email'), flat=False)
test_layout.addWidget(test_info, 0, 0, 1, 0)
test_layout.addWidget(test_button, 1, 0)
test_layout.addItem(QSpacerItem(0, 0, QSizePolicy.Expanding, QSizePolicy.Minimum) , 1, 1)
self.connect(test_button, SIGNAL('clicked()'), self.sendTestMail)
layout.addWidget(test, row, col)
self.mainwindow.writeAccessNeeded(test_info, test_button)
return test_button
def buildTestMail(self, layout, row, col):
test = QGroupBox(self)
test.setTitle(tr('Test for emails'))
test_layout = QGridLayout(test)
test_info = QLabel(tr('To check the configuration, you can send a test '
'email to the email address of your contact. Be sure to configure the '
'smarthost in the Email page if you need one.'))
test_info.setWordWrap(True)
test_button = Button(text=tr('Send test email'), flat=False)
test_layout.addWidget(test_info, 0, 0, 1, 2)
test_layout.addWidget(test_button, 1, 0)
test_layout.addItem(QSpacerItem(0, 0, QSizePolicy.Expanding, QSizePolicy.Preferred), 1, 1)
self.connect(test_button, SIGNAL('clicked()'), self.sendTestMail)
layout.addWidget(test, row, col)
return test_button
def __init__(self, client, parent):
ScrollArea.__init__(self)
self.client = client
self.mainwindow = parent
self.form = QFormLayout(self)
title = QLabel("<H1>Services</H1>")
self.form.addRow(title)
self.monitor = None
group = QGroupBox()
group.setTitle(self.tr("System Services Status"))
box = QVBoxLayout(group)
#parent is expected to be MainWindow !
self.monitor = MonitorWindow(client, self, parent)
box.addWidget(self.monitor)
self.form.addRow(group)
def buildSenderMail(self, layout, row, col):
sender_mail = QGroupBox(self)
sender_mail.setTitle(tr("Sender email address for system messages"))
sender_mail_layout = QGridLayout(sender_mail)
sender_mail_info = QLabel(
tr("Email address that will be used as the sender address in the emails sent to the administrator by EdenWall.")
)
sender_mail_info.setWordWrap(True)
sender_mail_edit = MailEdit()
sender_mail_edit.setMinimumWidth(sender_mail_edit.fontMetrics().averageCharWidth() * 15)
sender_mail_edit.setMaximumWidth(sender_mail_edit.fontMetrics().averageCharWidth() * 45)
sender_mail_layout.addWidget(sender_mail_info, 0, 0)
sender_mail_layout.addWidget(sender_mail_edit, 1, 0)
sender_mail_layout.addItem(QSpacerItem(0, 0, QSizePolicy.Expanding, QSizePolicy.Minimum) , 2, 0)
self.connect(sender_mail_edit, SIGNAL('textEdited(QString)'), self.setSenderMail)
layout.addWidget(sender_mail, row, col)
self.mainwindow.writeAccessNeeded(sender_mail_info, sender_mail_edit)
return sender_mail_edit
def buildOutgoing(self, layout, row, col):
outgoing = QGroupBox(self)
outgoing.setTitle(tr('Outgoing emails'))
outgoing_layout = QGridLayout(outgoing)
use_smarthost = QCheckBox()
outgoing_layout.addWidget(QLabel(tr('Use smarthost')), 1, 0)
outgoing_layout.addWidget(use_smarthost, 1, 1)
mail_relay = IpOrFqdnEdit()
outgoing_layout.addWidget(QLabel(tr('Host which relays EdenWall emails')), 2, 0)
outgoing_layout.addWidget(mail_relay, 2, 1)
self.mainwindow.writeAccessNeeded(use_smarthost, mail_relay)
self.connect(use_smarthost, SIGNAL('toggled(bool)'), mail_relay.setEnabled)
self.connect(use_smarthost, SIGNAL('clicked()'),
partial(self.setModified, True))
self.connect(mail_relay, SIGNAL('textEdited(QString)'), self.setSmarthost)
layout.addWidget(outgoing, row, col)
return outgoing, use_smarthost, mail_relay
def __createLayout(self):
""" Creates the dialog layout """
self.resize(450, 150)
self.setSizeGripEnabled(True)
verticalLayout = QVBoxLayout(self)
whereGroupbox = QGroupBox(self)
whereGroupbox.setTitle("Garbage collector message destination")
sizePolicy = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
whereGroupbox.sizePolicy().hasHeightForWidth())
whereGroupbox.setSizePolicy(sizePolicy)
layoutWhere = QVBoxLayout(whereGroupbox)
self.__silentRButton = QRadioButton(whereGroupbox)
self.__silentRButton.setText("Silent")
layoutWhere.addWidget(self.__silentRButton)
self.__statusbarRButton = QRadioButton(whereGroupbox)
self.__statusbarRButton.setText("Status bar")
layoutWhere.addWidget(self.__statusbarRButton)
self.__logtabRButton = QRadioButton(whereGroupbox)
self.__logtabRButton.setText("Log tab")
layoutWhere.addWidget(self.__logtabRButton)
verticalLayout.addWidget(whereGroupbox)
buttonBox = QDialogButtonBox(self)
buttonBox.setOrientation(Qt.Horizontal)
buttonBox.setStandardButtons(QDialogButtonBox.Ok
| QDialogButtonBox.Cancel)
self.__OKButton = buttonBox.button(QDialogButtonBox.Ok)
self.__OKButton.setDefault(True)
buttonBox.accepted.connect(self.accept)
buttonBox.rejected.connect(self.close)
verticalLayout.addWidget(buttonBox)
return
def __createLayout( self ):
""" Creates the dialog layout """
self.resize( 450, 150 )
self.setSizeGripEnabled( True )
verticalLayout = QVBoxLayout( self )
whereGroupbox = QGroupBox( self )
whereGroupbox.setTitle( "Garbage collector message destination" )
sizePolicy = QSizePolicy( QSizePolicy.Expanding, QSizePolicy.Preferred )
sizePolicy.setHorizontalStretch( 0 )
sizePolicy.setVerticalStretch( 0 )
sizePolicy.setHeightForWidth(
whereGroupbox.sizePolicy().hasHeightForWidth() )
whereGroupbox.setSizePolicy( sizePolicy )
layoutWhere = QVBoxLayout( whereGroupbox )
self.__silentRButton = QRadioButton( whereGroupbox )
self.__silentRButton.setText( "Silent" )
layoutWhere.addWidget( self.__silentRButton )
self.__statusbarRButton = QRadioButton( whereGroupbox )
self.__statusbarRButton.setText( "Status bar" )
layoutWhere.addWidget( self.__statusbarRButton )
self.__logtabRButton = QRadioButton( whereGroupbox )
self.__logtabRButton.setText( "Log tab" )
layoutWhere.addWidget( self.__logtabRButton )
verticalLayout.addWidget( whereGroupbox )
buttonBox = QDialogButtonBox( self )
buttonBox.setOrientation( Qt.Horizontal )
buttonBox.setStandardButtons( QDialogButtonBox.Ok |
QDialogButtonBox.Cancel )
self.__OKButton = buttonBox.button( QDialogButtonBox.Ok )
self.__OKButton.setDefault( True )
buttonBox.accepted.connect( self.accept )
buttonBox.rejected.connect( self.close )
verticalLayout.addWidget( buttonBox )
return
def buildIncoming(self, layout, row, col):
incoming = QGroupBox(self)
incoming.setTitle(tr('Incoming emails'))
incoming_layout = QGridLayout(incoming)
incoming_info = QLabel(tr('Domains for which EdenWall relays emails'))
relayed_domains = ListEdit()
relayed_domains.headers = self.getColumnLabels()
relayed_domains.readOnly = self.mainwindow.readonly
relayed_domains.setColDelegate(self.createDelegateForColumn)
relayed_domains.setEditInPopup(True)
relayed_domains.displayUpDown = False
self.connect(relayed_domains, SIGNAL('itemDeleted'), self.incomingDeleted)
self.connect(relayed_domains, SIGNAL('itemAdded'), self.incomingAdded)
self.connect(relayed_domains, SIGNAL('itemModified'), self.incomingModified)
self.connect(relayed_domains, SIGNAL('itemDeleted'), self.updateConfig)
self.connect(relayed_domains, SIGNAL('itemAdded'), self.updateConfig)
self.connect(relayed_domains, SIGNAL('itemModified'), self.updateConfig)
incoming_layout.addWidget(incoming_info, 0, 0)
incoming_layout.addWidget(relayed_domains, 1, 0)
layout.addWidget(incoming, row, col)
return relayed_domains
def buildMixer(self):
log.debug("Building mixer")
self.MatrixButtonControls={}
self.MatrixRotaryControls={}
self.MatrixVolumeControls={}
self.VolumeControls={}
self.SelectorControls={}
self.SPDIFmodeControls={}
self.TriggerControls={}
nb_pys_out = self.hw.getDiscrete("/HwInfo/PhysicalAudioOutCount")
nb_pys_in = self.hw.getDiscrete("/HwInfo/PhysicalAudioInCount")
outputtabslayout = QHBoxLayout( self )
outputtabs = QTabWidget(self)
outputtabslayout.addWidget( outputtabs, 1 )
for outpair in range(nb_pys_out/2):
tab = QWidget( outputtabs )
tablayout = QHBoxLayout( tab )
grpMonitor = QGroupBox(tab)
tablayout.addWidget(grpMonitor)
grpPlayback = QGroupBox(tab)
tablayout.addWidget(grpPlayback)
grpOutput = QGroupBox(tab)
tablayout.addWidget(grpOutput)
grpMonitor.setTitle("Monitor")
grpPlayback.setTitle("Playback")
grpOutput.setTitle("Output")
# monitor controls
grpMonitorLayout = QHBoxLayout()
grpMonitor.setLayout(grpMonitorLayout);
output_id = outpair * 2
for inpair in range(nb_pys_in/2):
# create GUI elements
strip = AfMonitorWidget( grpMonitor )
grpMonitorLayout.addWidget( strip, 1 )
input_id = inpair*2
strip.lblName.setText("In %d/%d" % (input_id+1, input_id+2))
# add the elements to the control structure
self.MatrixButtonControls[strip.btnMute0] = ['/Mixer/MonitorMute', input_id, output_id]
self.MatrixButtonControls[strip.btnMute1] = ['/Mixer/MonitorMute', input_id + 1, output_id + 1]
self.MatrixButtonControls[strip.btnSolo0] = ['/Mixer/MonitorSolo', input_id, output_id]
self.MatrixButtonControls[strip.btnSolo1] = ['/Mixer/MonitorSolo', input_id + 1, output_id + 1]
self.MatrixRotaryControls[strip.rotPan0] = ['/Mixer/MonitorPan', input_id, output_id]
self.MatrixRotaryControls[strip.rotPan1] = ['/Mixer/MonitorPan', input_id + 1, output_id + 1]
self.MatrixVolumeControls[strip.sldGain0] = ['/Mixer/MonitorGain', input_id, output_id]
self.MatrixVolumeControls[strip.sldGain1] = ['/Mixer/MonitorGain', input_id + 1, output_id + 1]
# playback
grpPlaybackLayout = QHBoxLayout()
grpPlayback.setLayout(grpPlaybackLayout);
strip = AfMonitorWidget( grpPlayback )
grpPlaybackLayout.addWidget(strip, 1)
strip.lblName.setText("Playback %d/%d" % (output_id+1, output_id+2))
self.VolumeControls[strip.sldGain0] = ["/Mixer/PC%dGain" % (output_id)]
self.VolumeControls[strip.sldGain1] = ["/Mixer/PC%dGain" % (output_id+1)]
self.SelectorControls[strip.btnMute0] = ["/Mixer/PC%dMute" % (output_id)]
self.SelectorControls[strip.btnMute1] = ["/Mixer/PC%dMute" % (output_id+1)]
self.SelectorControls[strip.btnSolo0] = ["/Mixer/PC%dSolo" % (output_id)]
self.SelectorControls[strip.btnSolo1] = ["/Mixer/PC%dSolo" % (output_id+1)]
# fix up mixer strip gui
strip.rotPan0.hide()
strip.rotPan1.hide()
# output
grpOutputLayout = QHBoxLayout()
grpOutput.setLayout(grpOutputLayout);
strip = AfMonitorWidget( grpOutput )
grpOutputLayout.addWidget(strip, 1)
strip.lblName.setText("Output %d/%d" % (output_id+1, output_id+2))
self.VolumeControls[strip.sldGain0] = ["/Mixer/OUT%dGain" % (output_id)]
self.VolumeControls[strip.sldGain1] = ["/Mixer/OUT%dGain" % (output_id+1)]
self.SelectorControls[strip.btnMute0] = ["/Mixer/OUT%dMute" % (output_id)]
self.SelectorControls[strip.btnMute1] = ["/Mixer/OUT%dMute" % (output_id+1)]
self.SelectorControls[strip.btnSolo0] = ["/Mixer/OUT%dNominal" % (output_id)]
self.SelectorControls[strip.btnSolo1] = ["/Mixer/OUT%dNominal" % (output_id+1)]
# fix up mixer strip gui
strip.btnSolo0.setText("Pad")
strip.btnSolo1.setText("Pad")
strip.rotPan0.hide()
strip.rotPan1.hide()
# add the tab
outputtabs.addTab( tab, "Out %d/%d" % (output_id+1, output_id+2))
# add an input config tab
tab = QWidget( outputtabs )
tablayout = QHBoxLayout( tab )
for inpair in range(nb_pys_in):
# create GUI elements
log.debug("strip")
grpInput = QGroupBox(tab)
tablayout.addWidget(grpInput)
grpInput.setTitle("In %d" % (inpair+1))
grpInputLayout = QVBoxLayout()
grpInput.setLayout(grpInputLayout);
label = QLabel( grpInput )
grpInputLayout.addWidget( label )
label.setText("In %d" % (inpair+1))
label.setAlignment(Qt.AlignCenter)
btn = QToolButton( grpInput )
grpInputLayout.addWidget( btn )
btn.setText("Pad")
btn.setCheckable(True)
self.SelectorControls[btn] = ["/Mixer/IN%dNominal" % (inpair)]
spacer = QSpacerItem(1,1,QSizePolicy.Minimum,QSizePolicy.Expanding)
grpInputLayout.addItem(spacer)
outputtabs.addTab( tab, "Input")
# add an settings tab
tab = QWidget( outputtabs )
tablayout = QHBoxLayout( tab )
outputtabs.addTab( tab, "Settings")
settings = AfSettingsWidget( tab )
has_sw_phantom = self.hw.getDiscrete("/HwInfo/PhantomPower")
if has_sw_phantom:
self.SelectorControls[settings.btnPhantom] = ["/PhantomPower"]
else:
settings.btnPhantom.hide()
self.TriggerControls[settings.btnSaveSettings] = ["/SaveSettings"]
self.TriggerControls[settings.btnIdentify] = ["/Identify"]
self.SPDIFmodeControls[settings.radioConsumer] = ["/SpdifMode", 0]
self.SPDIFmodeControls[settings.radioProfessional] = ["/SpdifMode", 1]
# Store a reference to the "save" button for later manipulation
self.btnSaveSettings = settings.btnSaveSettings
def __init__(self, template, character, parent=None):
super(SkillWidget, self).__init__(template, character, parent)
self.__layout = QVBoxLayout()
self.setLayout(self.__layout)
self.__scrollArea = QScrollArea()
## Die Auflistung der Fertigkeiten soll auch unter Windows einen transparenten Hintergrund haben.
self.__scrollArea.setObjectName("transparentWidget")
## \todo Sollte nicht vom Betriebssystem, sondern vom verwendeten Style abhängen.
if os.name == "nt":
self.__scrollArea.setStyleSheet(
"QWidget#transparentWidget { background: transparent; }")
self.__layout.addWidget(self.__scrollArea)
self.__scrollLayout = QVBoxLayout()
self.__scrollWidget = QWidget()
## Die Auflistung der Fertigkeiten soll auch unter Windows einen transparenten Hintergrund haben. Indem ich den selben Namen wie zuvor vergebe, wirkt auch das Stylsheet auf dieses Widget.
self.__scrollWidget.setObjectName("transparentWidget")
#self.__scrollWidget.setStyleSheet( "QWidget#transparentWidget { background-color:transparent; }" )
#scrollWidget.setMinimumSize(this.width(), 400);
self.__scrollWidget.setLayout(self.__scrollLayout)
typ = "Skill"
## Eine Liste, in der alle Eigenschafts-Widgets aufgelistet werden.
self.__traitWidgets = []
for item in Config.CATEGORIES_MAIN:
#Debug.debug(self._character.traits)
# Für jede Kategorie wird ein eigener Abschnitt erzeugt.
widgetSkillCategory = QGroupBox()
widgetSkillCategory.setTitle(item)
widgetSkillCategory.setFlat(True)
layoutSkillCategory = QVBoxLayout()
widgetSkillCategory.setLayout(layoutSkillCategory)
self.__scrollLayout.addWidget(widgetSkillCategory)
__list = list(self._character.traits[typ][item].items())
__list.sort()
for skill in __list:
# Anlegen des Widgets, das diese Eigenschaft repräsentiert.
traitWidget = CharaTrait(skill[1], self)
traitWidget.buttonText = 0
traitWidget.setDescriptionHidden(True)
traitWidget.enableButton(
0
) # Zu Beginn sollen die Spezailisierungen nicht enabled sein.
# Dieses Widget auch an Liste anhängen, damit ich einfacher darauf zugreifen kann.
traitListItem = traitWidget
self.__traitWidgets.append(traitListItem)
# Es werden nur Fertigkeiten der richtigen Alters- und Zeit-Kategorie angezeigt.
self.hideReasonChanged.connect(traitWidget.hideOrShowTrait)
# Fertigkeiten haben Spezialisierungen.
traitWidget.specialtiesClicked.connect(
self.uncheckOtherButtons)
traitWidget.specialtiesClicked.connect(
self.specialtiesActivated.emit)
## Wenn sich die Spezialisierungen ändern, sollen die veränderten Spezialisierungen auch angezeigt werden. Das wird so gelöst, als wäre der Knopf für die Spezialisierungen erneut gedrückt worden.
#skill.specialtiesChanged.connect(self.emitSpecialtiesActivated)
layoutSkillCategory.addWidget(traitWidget)
self.maxTraitChanged.connect(traitWidget.setMaximum)
# Stretch einfügen, damit die Eigenschaften besser angeordnet sind.
self.__scrollLayout.addStretch()
self.__scrollArea.setWidget(self.__scrollWidget)
self.__scrollArea.setWidgetResizable(True)
self.__scrollArea.setHorizontalScrollBarPolicy(Qt.ScrollBarAlwaysOff)
self.__scrollArea.setMinimumWidth(
self.__scrollArea.viewport().minimumWidth())
def initSettingTab(self):
# ##Setting Tab###
setting_tab = QWidget()
setting_tab_layout = QVBoxLayout()
self.tabWidget.addTab(setting_tab, "Settings")
# Task Box
task_box = QGroupBox()
task_box.setTitle(QString("Task properties"))
task_layout = QGridLayout()
# Name
name = QLabel("Name:")
name_value = QLineEdit()
name_value.setText(self.task.hittypename)
name_value.setEnabled(False)
clickable(name_value).connect(self.enable)
task_layout.addWidget(name, 0, 1)
task_layout.addWidget(name_value, 0, 2, 1, 3)
# Description
description = QLabel("Description:")
description_value = QLineEdit()
description_value.setText(self.task.description)
description_value.setEnabled(False)
clickable(description_value).connect(self.enable)
task_layout.addWidget(description, 1, 1)
task_layout.addWidget(description_value, 1, 2, 1, 3)
# Keywords
keywords = QLabel("Keywords:")
keywords_value = QLineEdit()
keywords_value.setText(','.join(self.task.keywords))
keywords_value.setEnabled(False)
clickable(keywords_value).connect(self.enable)
task_layout.addWidget(keywords, 2, 1)
task_layout.addWidget(keywords_value, 2, 2, 1, 3)
# Qualification
qualification = QLabel("Qualification [%]:")
qualification_value = QSpinBox()
qualification_value.setSuffix('%')
qualification_value.setValue(int(self.task.qualification))
qualification_value.setEnabled(False)
clickable(qualification_value).connect(self.enable)
task_layout.addWidget(qualification, 3, 1)
task_layout.addWidget(qualification_value, 3, 4)
# Assignments
assignments = QLabel("Assignments:")
assignments_value = QSpinBox()
assignments_value.setSuffix('')
assignments_value.setValue(int(self.task.assignments))
assignments_value.setEnabled(False)
clickable(assignments_value).connect(self.enable)
task_layout.addWidget(assignments, 4, 1)
task_layout.addWidget(assignments_value, 4, 4)
# Duration
duration = QLabel("Duration [min]:")
duration_value = QSpinBox()
duration_value.setSuffix('min')
duration_value.setValue(int(self.task.duration))
duration_value.setEnabled(False)
clickable(duration_value).connect(self.enable)
task_layout.addWidget(duration, 5, 1)
task_layout.addWidget(duration_value, 5, 4)
# Reward
reward = QLabel("Reward [0.01$]:")
reward_value = QDoubleSpinBox()
reward_value.setRange(0.01, 0.5)
reward_value.setSingleStep(0.01)
reward_value.setSuffix('$')
reward_value.setValue(self.task.reward)
reward_value.setEnabled(False)
clickable(reward_value).connect(self.enable)
task_layout.addWidget(reward, 6, 1)
task_layout.addWidget(reward_value, 6, 4)
# Lifetime
lifetime = QLabel("Lifetime [d]:")
lifetime_value = QSpinBox()
lifetime_value.setSuffix('d')
lifetime_value.setValue(self.task.lifetime)
lifetime_value.setEnabled(False)
clickable(lifetime_value).connect(self.enable)
task_layout.addWidget(lifetime, 7, 1)
task_layout.addWidget(lifetime_value, 7, 4)
# sandbox
sandbox = QCheckBox("Sandbox")
sandbox.setChecked(self.task.sandbox)
task_layout.addWidget(sandbox, 8, 1)
task_box.setLayout(task_layout)
task_layout.setColumnMinimumWidth(1, 120)
# Image Storage Box
storage_box = QGroupBox()
storage_box.setTitle(QString("Image Storage"))
storage_layout = QGridLayout()
# Host URL
host_url = QLabel("Host-URL:")
host_url_value = QLineEdit()
host_url_value.setText(self.task.host_url)
host_url_value.setEnabled(False)
clickable(host_url_value).connect(self.enable)
# Dropbox Path
dropbox_path = QLabel("Dropbox-Path:")
dropbox_path_value = QLineEdit()
dropbox_path_value.setText(self.task.dropbox_path)
dropbox_path_value.setEnabled(False)
clickable(dropbox_path_value).connect(self.enable)
# Dropbox or S3
usingS3 = QRadioButton("S3")
usingS3.setChecked(self.task.usingS3)
usingS3.setEnabled(False)
usingDropbox = QRadioButton("Dropbox")
usingDropbox.setChecked(self.task.usingDropbox)
storage_layout.addWidget(host_url, 0, 1)
storage_layout.addWidget(host_url_value, 0, 2, 1, 3)
storage_layout.addWidget(dropbox_path, 1, 1)
storage_layout.addWidget(dropbox_path_value, 1, 2, 1, 3)
# Add Layouts
save_button = QPushButton("Save Settings")
setting_tab_layout.addWidget(task_box)
setting_tab_layout.addWidget(storage_box)
setting_tab.setLayout(setting_tab_layout)
save_button.clicked.connect(self.SaveSettings)
storage_layout.addWidget(usingS3, 2, 1)
storage_layout.addWidget(usingDropbox, 3, 1)
storage_layout.addWidget(save_button, 3, 4)
# storage_layout.addStretch(1)
storage_box.setLayout(storage_layout)
def initDownloadTab(self):
# # # Download Tab# # #
download_tab = QWidget()
download_tab_layout = QVBoxLayout()
self.tabWidget.addTab(download_tab, "Download HITs")
# Status
status_box = QGroupBox()
status_box.setTitle("Status")
status_layout = QGridLayout()
self.table_turk = ContextTable(0, 4, self)
self.table_turk.setSelectionBehavior(QAbstractItemView.SelectRows)
self.table_turk.setColumnWidth(0, 160)
self.table_turk.setColumnWidth(1, 50)
self.table_turk.setColumnWidth(2, 90)
self.table_turk.setColumnWidth(3, 90)
# self.table_turk.verticalHeader().setVisible(False)
# Set Headers
header_0 = QTableWidgetItem()
header_0.setText("Turker")
self.table_turk.setHorizontalHeaderItem(0, header_0)
header_1 = QTableWidgetItem()
header_1.setText("HITs")
self.table_turk.setHorizontalHeaderItem(1, header_1)
header_2 = QTableWidgetItem()
header_2.setText("Rejected")
self.table_turk.setHorizontalHeaderItem(2, header_2)
header_3 = QTableWidgetItem()
header_3.setText("Approved")
self.table_turk.setHorizontalHeaderItem(3, header_3)
status_layout.addWidget(self.table_turk, 0, 0, 1, 2)
# Status Button
status_button = QPushButton('Update Status')
status_button.clicked.connect(self.getStatus)
status_layout.addWidget(status_button, 1, 1)
status_box.setLayout(status_layout)
download_tab_layout.addWidget(status_box)
# Download Button
download_button = QPushButton("Download Results")
download_button.clicked.connect(self.download)
status_layout.addWidget(download_button, 1, 0)
# Options Box
options_box = QGroupBox()
options_box.setTitle("Import results")
options_box_layout = QGridLayout()
matching = QRadioButton("Choose best matching Outlines")
matching.setEnabled(False)
review = QRadioButton("Review by hand")
review.setChecked(True)
review_button = QPushButton("Review Results")
review_button.clicked.connect(self.review)
# Import Button
import_button = QPushButton("Import results")
import_button.clicked.connect(self.importResults)
options_box_layout.addWidget(review, 0, 0)
options_box_layout.addWidget(review_button, 0, 1)
options_box_layout.addWidget(matching, 1, 0)
options_box_layout.addWidget(import_button, 2, 0, 1, 2)
options_box.setLayout(options_box_layout)
download_tab_layout.addWidget(options_box)
download_tab.setLayout(download_tab_layout)
def initGui(self):
"""
Initialize the GUI.
"""
self.setAttribute(QtCore.Qt.WA_DeleteOnClose)
self.initMainWidget()
self.setMenuBar()
self.setWindowTitle("VMI Viewer")
self.resize(self._init_window_width, self._init_window_height)
### RunInfo.
group_runinfo = QGroupBox(self)
group_runinfo.setTitle("RunInfo")
font = group_runinfo.font()
font.setPointSize(self._font_size_groupbox_title)
group_runinfo.setFont(font)
group_runinfo.resize(400, 100)
grid_runinfo = QGridLayout(group_runinfo)
# Run No.
label_run = QLabel(self)
label_run.setText("Run No. : ")
label_run.setAlignment(Qt.AlignRight)
font = label_run.font()
font.setPointSize(self._font_size_label)
font.setBold(self._font_bold_label)
label_run.setFont(font)
self.label_run_number = QLabel(self)
self.label_run_number.setText("Unknown")
pal = QPalette()
pal.setColor(QPalette.Foreground, QColor("#0B5345"))
self.label_run_number.setPalette(pal)
font = self.label_run_number.font()
font.setBold(True)
font.setPointSize(self._font_size_label)
self.label_run_number.setFont(font)
# Tag No.
label_tag = QLabel(self)
label_tag.setText("Tag No. : ")
label_tag.setAlignment(Qt.AlignRight)
font = label_tag.font()
font.setPointSize(self._font_size_label)
font.setBold(self._font_bold_label)
label_tag.setFont(font)
self.label_tag_start = QLabel(self)
self.label_tag_start.setText("None")
font = self.label_tag_start.font()
font.setBold(True)
font.setPointSize(self._font_size_label)
self.label_tag_start.setFont(font)
label_tag_hyphen = QLabel(self)
label_tag_hyphen.setText(" - ")
label_tag_hyphen.setFixedWidth(30)
font = label_tag_hyphen.font()
font.setPointSize(self._font_size_label)
font.setBold(self._font_bold_label)
label_tag_hyphen.setFont(font)
self.label_tag_end = QLabel(self)
self.label_tag_end.setText("None")
font = self.label_tag_end.font()
font.setBold(True)
font.setPointSize(self._font_size_label)
self.label_tag_end.setFont(font)
# Sig / BG.
label_sig = QLabel(self)
label_sig.setText("# of Sig : ")
label_sig.setAlignment(Qt.AlignRight)
font = label_sig.font()
font.setPointSize(self._font_size_label)
font.setBold(self._font_bold_label)
label_sig.setFont(font)
self.label_nbr_of_sig = QLabel(self)
self.label_nbr_of_sig.setText("None")
font = self.label_nbr_of_sig.font()
font.setBold(True)
font.setPointSize(self._font_size_label)
self.label_nbr_of_sig.setFont(font)
label_bg = QLabel(self)
label_bg.setText("# of BG : ")
label_bg.setAlignment(Qt.AlignRight)
font = label_bg.font()
font.setPointSize(self._font_size_label)
font.setBold(self._font_bold_label)
label_bg.setFont(font)
self.label_nbr_of_bg = QLabel(self)
self.label_nbr_of_bg.setText("None")
font = self.label_nbr_of_bg.font()
font.setBold(True)
font.setPointSize(self._font_size_label)
self.label_nbr_of_bg.setFont(font)
# Construct the layout.
grid_runinfo.addWidget(label_run, 0, 0)
grid_runinfo.addWidget(self.label_run_number, 0, 1, 1, 3)
grid_runinfo.addWidget(label_tag, 1, 0)
grid_runinfo.addWidget(self.label_tag_start, 1, 1)
grid_runinfo.addWidget(label_tag_hyphen, 1, 2)
grid_runinfo.addWidget(self.label_tag_end, 1, 3)
grid_runinfo.addWidget(label_sig, 2, 0)
grid_runinfo.addWidget(self.label_nbr_of_sig, 2, 1)
grid_runinfo.addWidget(label_bg, 2, 2)
grid_runinfo.addWidget(self.label_nbr_of_bg, 2, 3)
### Settings.
# group_settings = QGroupBox(self)
# group_settings.setTitle("Settings")
# font = group_settings.font()
# font.setPointSize(self._font_size_groupbox_title)
# group_settings.setFont(font)
# group_settings.resize(400, 100)
# grid_settings = QGridLayout(group_settings)
# # Update interval.
# label_upd_rate = QLabel(self)
# label_upd_rate.setText("Upd. image interval: ")
# font = label_upd_rate.font()
# font.setPointSize(self._font_size_label)
# font.setBold(self._font_bold_label)
# label_upd_rate.setFont(font)
# self.spinbox_upd_img_interval = QDoubleSpinBox(self)
# self.spinbox_upd_img_interval.setValue(self._get_data_interval)
# self.spinbox_upd_img_interval.setFixedWidth(100)
# self.spinbox_upd_img_interval.setAlignment(Qt.AlignRight)
# font = self.spinbox_upd_img_interval.font()
# font.setBold(True)
# font.setPointSize(self._font_size_label)
# self.spinbox_upd_img_interval.setFont(font)
# label_upd_rate_unit = QLabel(self)
# label_upd_rate_unit.setText("sec")
# font = label_upd_rate_unit.font()
# font.setPointSize(self._font_size_label)
# font.setBold(self._font_bold_label)
# label_upd_rate_unit.setFont(font)
# Construct the layout.
# grid_settings.addWidget(label_upd_rate, 0, 0, 1, 3)
# grid_settings.addWidget(self.spinbox_upd_img_interval, 0, 3)
# grid_settings.addWidget(label_upd_rate_unit, 0, 4)
### Function buttons.
group_func = QGroupBox(self)
group_func.setTitle("Function")
font = group_func.font()
font.setPointSize(self._font_size_groupbox_title)
group_func.setFont(font)
group_func.resize(400, 100)
grid_func = QGridLayout(group_func)
grid_func.setSpacing(10)
# Start/Stop main process button.
self.brun = QPushButton(group_func)
self.brun.setText("Start")
font = self.brun.font()
font.setPointSize(self._font_size_button)
self.brun.setFont(font)
self.brun.resize(400, 50)
self.brun.setStyleSheet("background-color:{};".format(
self._init_button_color))
self.brun.clicked.connect(self.runMainProcess)
# Clear data button.
bclear = QPushButton(group_func)
bclear.setText("Clear")
font = bclear.font()
font.setPointSize(self._font_size_button)
bclear.setFont(font)
bclear.resize(400, 50)
bclear.setStyleSheet("background-color:{};".format(
self._init_button_color))
bclear.clicked.connect(self.clearData)
# Save images button.
bsave = QPushButton(group_func)
bsave.setText("Save")
font = bsave.font()
font.setPointSize(self._font_size_button)
bsave.setFont(font)
bsave.resize(400, 50)
bsave.setStyleSheet("background-color:{};".format(
self._init_button_color))
bsave.clicked.connect(self.saveData)
# New window button.
bwindow = QPushButton(group_func)
bwindow.setText("Window")
font = bwindow.font()
font.setPointSize(self._font_size_button)
bwindow.setFont(font)
bwindow.resize(400, 50)
bwindow.setStyleSheet("background-color:{};".format(
self._init_button_color))
bwindow.clicked.connect(self.showWindow)
# Construct the layout of RunInfo groupbox.
grid_func.addWidget(self.brun, 0, 0)
grid_func.addWidget(bclear, 0, 1)
grid_func.addWidget(bsave, 1, 0)
grid_func.addWidget(bwindow, 1, 1)
### Plotting area.
grp1 = QGroupBox(self)
# grp1.setTitle("SIG WL")
grp1.setTitle("SIG")
font = grp1.font()
font.setPointSize(self._font_size_groupbox_title)
grp1.setFont(font)
gp1 = QGridLayout(grp1)
gp1.setSpacing(10)
grp2 = QGroupBox(self)
# grp2.setTitle("SIG WOL")
grp2.setTitle("BG")
font = grp2.font()
font.setPointSize(self._font_size_groupbox_title)
grp2.setFont(font)
gp2 = QGridLayout(grp2)
gp2.setSpacing(10)
grp3 = QGroupBox(self)
# grp3.setTitle("BG WL")
grp3.setTitle("SIg - BG")
font = grp3.font()
font.setPointSize(self._font_size_groupbox_title)
grp3.setFont(font)
gp3 = QGridLayout(grp3)
gp3.setSpacing(10)
# grp4 = QGroupBox(self)
# grp4.setTitle("BG WOL")
# font = grp4.font()
# font.setPointSize(self._font_size_groupbox_title)
# grp4.setFont(font)
# gp4 = QGridLayout(grp4)
# gp4.setSpacing(10)
kwargs = dict(px=False, py=False, ph=False, bp=False)
self.pw1 = PlotWindow(self, **kwargs)
self.pw2 = PlotWindow(self, **kwargs)
self.pw3 = PlotWindow(self, **kwargs)
# self.pw4 = PlotWindow(self, **kwargs)
gp1.addWidget(self.pw1, 0, 0)
gp2.addWidget(self.pw2, 0, 0)
gp3.addWidget(self.pw3, 0, 0)
# gp4.addWidget(self.pw4, 0, 0)
### Construct the layout.
self.grid.addWidget(group_runinfo, 0, 0)
# self.grid.addWidget(group_settings, 0, 1)
self.grid.addWidget(group_func, 0, 1)
self.grid.addWidget(grp1, 1, 0, 2, 1)
self.grid.addWidget(grp2, 1, 1, 2, 1)
self.grid.addWidget(grp3, 1, 2, 2, 1)
# self.grid.addWidget(grp4, 1, 3, 2, 1)
self.main_widget.setFocus()
self.setCentralWidget(self.main_widget)
class Main(plugin.Plugin):
" Main Class "
def initialize(self, *args, **kwargs):
" Init Main Class "
super(Main, self).initialize(*args, **kwargs)
self.chooser, self.process = QComboBox(), QProcess()
self.chooser.addItems([' Ubuntu Unity QuickList .desktop ',
' KDE Plasma MetaData .desktop ',
' FreeDesktop Standard .desktop '])
self.chooser.currentIndexChanged.connect(self.on_index_changed)
self.chooser.setToolTip('Select a target .desktop file format')
# Standard FreeDesktop
self.group1 = QGroupBox()
self.group1.setTitle(' Standard ')
self.ledVersion, self.ledCategories = QDoubleSpinBox(), QComboBox()
self.ledVersion.setMinimum(0.1)
self.ledVersion.setMaximum(999.9)
self.ledVersion.setValue(1.0)
self.ledVersion.setDecimals(1)
self.ledType, self.ledName = QLineEdit('Application'), QLineEdit('App')
self.ledGenericName = QLineEdit('Generic App')
self.ledComment, self.ledIcon = QLineEdit('App'), QLineEdit('icon.svg')
self.ledCategories.addItems(['Python Programming Language',
'Development', 'Ruby', 'C++', 'Amateur Radio', 'Communication',
'Cross Platform', 'Databases', 'Debug', 'Documentation', 'Editors',
'Education', 'Electronics', 'Email', 'Embebed Devices', 'Fonts',
'GNOME Desktop Environment', 'GNU R Statistical System',
'GObject Introspection Data', 'Games and Amusement',
'Gnustep Desktop Environtment', 'Graphics',
'Haskell Programming Language',
'Internationalization and Localization', 'Internet',
'Interpreted Computer Languages', 'KDE Software Compilation',
'Kernel and Modules', 'Libraries', 'Libraries - Development',
'Libraries - Old', 'Lisp Programming Language', 'Localization',
'Mathematics', 'Meta Packages', 'Miscelaneous - Graphical',
'Miscelaneous - Text Based', 'Mono/CLI Infraestructure',
'Multimedia', 'Networking', 'Newsgroups',
'OCaml Programming Language', 'PHP Programming Language',
'Perl Programming Language', 'Ruby Programming Language',
'Science', 'Shells', 'System Administration', 'TeX Authoring',
'Utilities', 'Version Control Systems', 'Video Software',
'Web Servers', 'Word Processing', 'Xfce Desktop Environment',
'Zope/Plone Environment'])
self.ledExec, self.ledTryExec = QLineEdit('myapp'), QLineEdit('myapp')
self.ledMymeType = QLineEdit('application/x-desktop')
self.ledTerminal = QComboBox()
self.ledTerminal.addItems(['False', 'True'])
self.ledActions = QLineEdit('Next;Previous')
self.ledOnlyShowIn = QLineEdit('Unity;KDE')
self.ledNotShowIn = QLineEdit('Gnome2')
vboxg1 = QVBoxLayout(self.group1)
for each_widget in (QLabel('Version'), self.ledVersion, QLabel('Type'),
self.ledType, QLabel('Name'), self.ledName, QLabel('GenericName'),
self.ledGenericName, QLabel('Comment'), self.ledComment,
QLabel('Icon'), self.ledIcon, QLabel('Categories'),
self.ledCategories, QLabel('Exec'), self.ledExec, QLabel('TryExec'),
self.ledTryExec, QLabel('MymeType'), self.ledMymeType,
QLabel('Terminal'), self.ledTerminal, QLabel('Actions'),
self.ledActions, QLabel('OnlyShowIn'), self.ledOnlyShowIn,
QLabel('NotShowIn'), self.ledNotShowIn):
vboxg1.addWidget(each_widget)
# KDE Plasma
self.group2 = QGroupBox()
self.group2.setTitle(' KDE Plasma ')
self.group2.setGraphicsEffect(QGraphicsBlurEffect(self))
self.ledEncoding, self.ledXPlasmaAPI = QComboBox(), QComboBox()
self.ledEncoding.addItems(['UTF-8', 'ISO-8859-1'])
self.ledServiceType = QLineEdit('Plasma/Applet')
self.ledXPlasmaAPI.addItems([
'Python', 'Javascript', 'Ruby', 'C++', 'HTML5', 'QML'])
self.ledXPlasmaMainScript = QLineEdit('path/to/your/code.py')
self.ledXKDEPluginInfoAuthor = QLineEdit(getuser())
self.ledXKDEPluginInfoEmail = QLineEdit(getuser() + '@gmail.com')
self.ledXKDEPluginInfoName = QLineEdit('Hello-World')
self.ledXKDEPluginInfoVersion = QLineEdit('1.0')
self.ledXKDEPluginInfoWebsite = QLineEdit('http:plasma.kde.org')
self.ledXKDEPluginInfoCategory = QComboBox()
self.ledXKDEPluginInfoCategory.addItems(['Application Launchers',
'Accessibility', 'Astronomy', 'Date and Time',
'Development Tools', 'Education', 'Environment', 'Examples',
'File System', 'Fun and Games', 'Graphics', 'Language', 'Mapping',
'Multimedia', 'Online Services', 'System Information', 'Utilities',
'Windows and Tasks', 'Miscelaneous'])
self.ledXKDEPluginInfoDepends = QLineEdit()
self.ledXKDEPluginInfoLicense = QLineEdit('GPL')
self.ledXKDEPluginInfoEnabledByDefault = QComboBox()
self.ledXKDEPluginInfoEnabledByDefault.addItems(['True', 'False'])
vboxg2 = QVBoxLayout(self.group2)
for each_widget in (
QLabel('Encoding'), self.ledEncoding,
QLabel('ServiceType'), self.ledServiceType,
QLabel('X-Plasma-API'), self.ledXPlasmaAPI,
QLabel('X-Plasma-MainScript'), self.ledXPlasmaMainScript,
QLabel('X-KDE-PluginInfo-Author'), self.ledXKDEPluginInfoAuthor,
QLabel('X-KDE-PluginInfo-Email'), self.ledXKDEPluginInfoEmail,
QLabel('X-KDE-PluginInfo-Name'), self.ledXKDEPluginInfoName,
QLabel('X-KDE-PluginInfo-Version'), self.ledXKDEPluginInfoVersion,
QLabel('X-KDE-PluginInfo-Website'), self.ledXKDEPluginInfoWebsite,
QLabel('X-KDE-PluginInfo-Category'), self.ledXKDEPluginInfoCategory,
QLabel('X-KDE-PluginInfo-Depends'), self.ledXKDEPluginInfoDepends,
QLabel('X-KDE-PluginInfo-License'), self.ledXKDEPluginInfoLicense,
QLabel('X-KDE-PluginInfo-EnabledByDefault'),
self.ledXKDEPluginInfoEnabledByDefault):
vboxg2.addWidget(each_widget)
# Ubuntu Unity
self.ledXAyatanaDesktopShortcuts = QLineEdit('Next;Previous')
self.checkbox1 = QCheckBox('Open .desktop file when done')
self.checkbox2 = QCheckBox('Make .desktop file Executable')
[a.setChecked(True) for a in (self.checkbox1, self.checkbox2)]
self.button = QPushButton(' Make .Desktop File ! ')
self.button.setMinimumSize(100, 50)
self.button.clicked.connect(self.writeFile)
glow = QGraphicsDropShadowEffect(self)
glow.setOffset(0)
glow.setBlurRadius(99)
glow.setColor(QColor(99, 255, 255))
self.button.setGraphicsEffect(glow)
glow.setEnabled(True)
class TransientWidget(QWidget):
' persistant widget thingy '
def __init__(self, widget_list):
' init sub class '
super(TransientWidget, self).__init__()
vbox = QVBoxLayout(self)
for each_widget in widget_list:
vbox.addWidget(each_widget)
tw = TransientWidget((self.chooser, self.group1, self.group2,
QLabel('X-Ayatana-Desktop-Shortcuts'),
self.ledXAyatanaDesktopShortcuts, QLabel(''),
self.checkbox1, self.checkbox2, self.button))
self.dock, self.scrollable = QDockWidget(), QScrollArea()
self.scrollable.setWidgetResizable(True)
self.scrollable.setWidget(tw)
self.dock.setWindowTitle(__doc__)
self.dock.setStyleSheet('QDockWidget::title{text-align: center;}')
self.dock.setWidget(self.scrollable)
ExplorerContainer().addTab(self.dock, "DotDesktop")
QPushButton(QIcon.fromTheme("help-about"), 'About', self.dock
).clicked.connect(lambda: QMessageBox.information(self.dock, __doc__,
''.join((__doc__, __version__, __license__, 'by', __author__))))
def writeFile(self):
' write the .desktop file to disk '
UNITY = ''.join(a for a in iter((
'OnlyShowIn=', str(self.ledOnlyShowIn.text()), linesep,
'NotShowIn=', str(self.ledNotShowIn.text()), linesep,
'X-Ayatana-Desktop-Shortcuts=',
str(self.ledXAyatanaDesktopShortcuts.text()), linesep)))
PLASMA = ''.join(a for a in iter((
'OnlyShowIn=', str(self.ledOnlyShowIn.text()), linesep,
'NotShowIn=', str(self.ledNotShowIn.text()), linesep,
'Encoding=', str(self.ledEncoding.currentText()), linesep,
'ServiceTypes=', str(self.ledServiceType.text()), linesep,
'X-Plasma-API=', str(self.ledXPlasmaAPI.currentText()), linesep,
'X-Plasma-MainScript=', str(self.ledXPlasmaMainScript.text()), linesep,
'X-KDE-PluginInfo-Author=', str(self.ledXKDEPluginInfoAuthor.text()),
linesep,
'X-KDE-PluginInfo-Email=', str(self.ledXKDEPluginInfoEmail.text()),
linesep,
'X-KDE-PluginInfo-Name=', str(self.ledXKDEPluginInfoName.text()),
linesep,
'X-KDE-PluginInfo-Version=', str(self.ledXKDEPluginInfoVersion.text()),
linesep,
'X-KDE-PluginInfo-Website=', str(self.ledXKDEPluginInfoWebsite.text()),
linesep,
'X-KDE-PluginInfo-Category=',
str(self.ledXKDEPluginInfoCategory.currentText()), linesep,
'X-KDE-PluginInfo-Depends=', str(self.ledXKDEPluginInfoDepends.text()),
linesep,
'X-KDE-PluginInfo-License=', str(self.ledXKDEPluginInfoLicense.text()),
linesep,
'X-KDE-PluginInfo-EnabledByDefault=',
str(self.ledXKDEPluginInfoEnabledByDefault.currentText()), linesep)))
BASE = ''.join(a for a in iter((
'[Desktop Entry]', linesep,
'Version=', str(self.ledVersion.value()), linesep,
'Type=', str(self.ledType.text()), linesep,
'Name=', str(self.ledName.text()), linesep,
'Comment=', str(self.ledComment.text()), linesep,
'TryExec=', str(self.ledTryExec.text()), linesep,
'Exec=', str(self.ledExec.text()), linesep,
'Icon=', str(self.ledIcon.text()), linesep,
'MimeType=', str(self.ledMymeType.text()), linesep,
'Actions=', str(self.ledActions.text()), linesep,
'Terminal=', str(self.ledTerminal.currentText()), linesep)))
ACTIONS * len(str(self.ledActions.text()).lower().strip().split(';'))
fnm = str(QFileDialog.getSaveFileName(self.dock, '', '', "(*.desktop)"))
with open(fnm, 'w') as f:
if self.chooser.currentIndex() is 0 and fnm is not '':
f.write(''.join(a for a in iter((BASE, UNITY, ACTIONS))))
elif self.chooser.currentIndex() is 1 and fnm is not '':
f.write(''.join(a for a in iter((BASE, PLASMA))))
elif fnm is not '':
f.write(BASE)
if self.checkbox2.isChecked() and fnm is not '':
try:
chmod(fnm, 0775) # Py2
except:
chmod(fnm, 0o775) # Py3
if self.checkbox1.isChecked() and fnm is not '':
self.process.start('ninja-ide ' + fnm)
if not self.process.waitForStarted():
print((" ERROR: FAIL: {} failed!".format(fnm)))
return
def on_index_changed(self):
' enable disable the qgroupbox if needed '
if self.chooser.currentIndex() is 1:
self.group2.graphicsEffect().setEnabled(False)
self.group2.setEnabled(True)
else:
self.group2.graphicsEffect().setEnabled(True)
self.group2.setEnabled(False)
if self.chooser.currentIndex() is 0:
self.ledXAyatanaDesktopShortcuts.setEnabled(True)
else:
self.ledXAyatanaDesktopShortcuts.setEnabled(False)
class SessionsManager(QDialog):
def __init__(self, n, parent=None):
super(SessionsManager, self).__init__(parent)
self.par = n
#main
title = Settingz().positions(30)
self.titleID = title['id']
self.titlePage = title['page']
self.titleName = title['name']
self.titleSub = title['subID']
self.titleIcon = title['icon']
self.pagetitle = self.titlePage
#stylesheet
stylesheet = Valid().background() + Valid().font()
treeStyleSheet = Valid().treez()
self.groupBox1 = QGroupBox(self.titleName)
self.groupBox2 = QGroupBox('Add')
#items
self.tree = QTreeWidget()
self.tree.setHeaderLabel("Choose " + self.titleName)
#tree.setItemDelegate(Delegate())
self.tree.setItemDelegate(Delegates())
self.tree.headerItem().setText(0, 'Name')
self.tree.setStyleSheet(treeStyleSheet)
self.makeTree()
self.tree.setMinimumHeight(250)
self.tree.clicked.connect(lambda: self.getSelection())
self.tree.itemClicked.connect(lambda state: self.getChecked(state))
#buttons
#add
nImg = Buttons().addButton()
self.pb = QPushButton()
self.pb.setFlat(True)
self.pb.setIcon(QIcon(nImg))
self.pb.setMaximumHeight(30)
self.pb.setMaximumWidth(30)
nImg1 = Buttons().closeButton()
self.pb1 = QPushButton()
self.pb1.setFlat(True)
self.pb1.setIcon(QIcon(nImg1))
self.pb1.setMaximumHeight(30)
self.pb1.setMaximumWidth(30)
nImg2 = Buttons().editButton()
self.pb2 = QPushButton()
self.pb2.setFlat(True)
self.pb2.setIcon(QIcon(nImg2))
self.pb2.setMaximumHeight(30)
self.pb2.setMaximumWidth(30)
nImg3 = Buttons().deleteButton()
self.pb3 = QPushButton()
self.pb3.setFlat(True)
self.pb3.setIcon(QIcon(nImg3))
self.pb3.setMaximumHeight(30)
self.pb3.setMaximumWidth(30)
nImg4 = Buttons().saveButton()
self.pb4 = QPushButton()
self.pb4.setFlat(True)
self.pb4.setIcon(QIcon(nImg4))
self.pb4.setMaximumHeight(30)
self.pb4.setMaximumWidth(30)
nImg5 = Buttons().resetButton()
self.pb5 = QPushButton()
self.pb5.setFlat(True)
self.pb5.setIcon(QIcon(nImg5))
self.pb5.setMaximumHeight(30)
self.pb5.setMaximumWidth(30)
nImg6 = Buttons().closeButton()
self.pb6 = QPushButton()
self.pb6.setFlat(True)
self.pb6.setIcon(QIcon(nImg6))
self.pb6.setMaximumHeight(30)
self.pb6.setMaximumWidth(30)
nImg7 = Buttons().addButton()
self.pb7 = QPushButton()
self.pb7.setFlat(True)
self.pb7.setIcon(QIcon(nImg7))
self.pb7.setMaximumHeight(30)
self.pb7.setMaximumWidth(30)
hbo = QHBoxLayout()
hbo.addStretch()
hbo.addWidget(self.pb1)
hbo.addWidget(self.pb3)
hbo.addWidget(self.pb2)
hbo.addWidget(self.pb7)
vbo = QVBoxLayout()
vbo.addWidget(self.tree)
vbo.addLayout(hbo)
self.l1 = QLabel("Name")
self.le1 = QLineEdit()
self.le1.setObjectName("name")
vals1 = Valid().fullNum()
self.le1.setValidator(vals1)
self.le1.setPlaceholderText("Lowercase max 25 letters")
self.fromLbl = QLabel("Starts")
self.toLbl = QLabel("Ends")
self.fromData = QDateEdit()
self.toData = QDateEdit()
currentDate = QDate()
self.fromData.setDate(currentDate.currentDate())
self.fromData.setCalendarPopup(True)
self.toData.setDate(currentDate.currentDate())
self.toData.setCalendarPopup(True)
FormLayout = QFormLayout()
FormLayout.addRow(self.l1, self.le1)
FormLayout.addRow(self.fromLbl, self.fromData)
FormLayout.addRow(self.toLbl, self.toData)
Hlayout1 = QHBoxLayout()
Hlayout1.addStretch()
Hlayout1.addWidget(self.pb6)
Hlayout1.addWidget(self.pb5)
Hlayout1.addWidget(self.pb4)
Hlayout1.addWidget(self.pb)
Vlayout1 = QVBoxLayout()
Vlayout1.addLayout(FormLayout)
Vlayout1.addLayout(Hlayout1)
self.groupBox1.setLayout(vbo)
self.groupBox2.setLayout(Vlayout1)
self.groupBox2.hide()
self.connect(self.pb, SIGNAL("clicked()"),
lambda: self.button_add()) #add
self.connect(self.pb1, SIGNAL("clicked()"),
lambda: self.button_close()) #close
self.connect(self.pb2, SIGNAL("clicked()"),
lambda: self.button_edit()) #edit
self.connect(self.pb3, SIGNAL("clicked()"),
lambda: self.button_delete()) #delete
self.connect(self.pb4, SIGNAL("clicked()"),
lambda: self.button_save()) #save
self.connect(self.pb5, SIGNAL("clicked()"),
lambda: self.button_reset()) #reset
self.pb4.hide()
self.pb7.hide()
grid = QGridLayout()
grid.addWidget(self.groupBox1, 0, 0)
grid.addWidget(self.groupBox2, 1, 0)
self.setLayout(grid)
self.setStyleSheet(stylesheet)
self.setWindowIcon(QIcon(self.titleIcon))
self.setWindowTitle(self.pagetitle)
def makeTree(self):
self.tree.clear()
arr = Db().selectn('session', '', 5)
self.hold_data = {}
self.hold_mdata = {}
self.hold_data_add = {}
self.hold_data_add_item = {}
current = time.time()
if self.titleSub and self.titleSub > 0:
if arr and len(arr) > 0:
for val in arr:
ch = Valid().pullData('terms', '',
{'sessionID': val['id']})
child = QTreeWidgetItem(self.tree)
child.setIcon(0, QIcon('icons.cfolder.png'))
try:
ts = int(float(val['start_date']))
except:
ts = int(current)
ts = datetime.utcfromtimestamp(ts).strftime('%d-%m-%Y')
try:
ts1 = int(float(val['end_date']))
except:
ts1 = int(current)
ts1 = datetime.utcfromtimestamp(ts1).strftime('%d-%m-%Y')
child.setText(
0,
str(val['name']).upper() + " - " + ts + " " + ts1)
self.hold_mdata[val['id']] = child
for va in ch:
child1 = QTreeWidgetItem(child)
child1.setFlags(child1.flags()
| Qt.ItemIsUserCheckable)
try:
ts2 = int(float(va['start_date']))
except:
ts2 = int(current)
ts2 = datetime.utcfromtimestamp(ts2).strftime(
'%d-%m-%Y')
try:
ts3 = int(float(va['end_date']))
except:
ts3 = int(current)
ts3 = datetime.utcfromtimestamp(ts3).strftime(
'%d-%m-%Y')
child1.setText(
0,
str(va['name']).upper() + " " + ts2 + " " + ts3)
self.hold_data[va['id']] = child1
if (va['active'] == 1):
child1.setCheckState(0, Qt.Checked)
else:
child1.setCheckState(0, Qt.Unchecked)
child1 = QTreeWidgetItem(child)
child1.setFlags(child1.flags() | Qt.ItemIsUserCheckable)
child1.setText(0, 'Add New Term')
self.hold_data_add_item[val['id']] = child1
else:
if arr and len(arr) > 0:
for val in arr:
child = QTreeWidgetItem(self.tree)
child.setFlags(child.flags() | Qt.ItemIsUserCheckable)
child.setText(0, str(val['name']).upper())
child.setText(1, str(val['abbrv']).upper())
self.hold_data[val['id']] = child
if (val['active'] == 0):
child.setCheckState(0, Qt.Checked)
else:
child.setCheckState(0, Qt.Unchecked)
child = QTreeWidgetItem(self.tree)
child.setFlags(child.flags() | Qt.ItemIsUserCheckable)
child.setText(0, 'Add New Session')
self.hold_data_add['addnew'] = child
def getChecked(self, a):
arr_hold = []
g = Db()
for i in self.hold_data:
if self.hold_data[i].checkState(0) == Qt.Checked:
arr_hold.append(i)
self.hold_data[i].setCheckState(0, Qt.Checked)
g.update('terms', {'active': 0}, {'active': 1})
g.update('terms', {'active': 1}, {'id': i})
tt = g.selectn('terms', '', 1, {'id': i})
g.update('session', {'active': 0}, {'active': 1})
g.update('session', {'active': 1}, {'id': tt['sessionID']})
g.selectn('session', '', 1, {'id': tt['sessionID']})
else:
self.hold_data[i].setCheckState(0, Qt.Unchecked)
self.reloadTerm()
def reloadTerm(self):
session = self.par.activeTerm()
activeTerm = str(session[1]) + ' SESSION ' + str(session[3]) + ' TERM'
self.par.majorSession = session[2]
self.par.lbl.setText(activeTerm)
def getSelected(self):
r = False
self.sessionMain = False
for i in self.hold_mdata:
if self.hold_mdata[i].isSelected():
r = i
if r and r > 0:
self.groupBox2.show()
self.sessionMain = True
return r
else:
for i in self.hold_data:
if self.hold_data[i].isSelected():
r = i
if r and r > 0:
self.sessionMain = False
self.groupBox2.show()
return r
else:
self.groupBox2.hide()
def getSession(self):
self.sessionID = None
for i in self.hold_data_session:
if self.hold_data_session[i].isSelected():
r = i
if r and r > 0:
self.sessionID = r
def getSelection(self):
self.le1.clear()
currentDate = QDate()
self.fromData.setDate(currentDate.currentDate())
self.toData.setDate(currentDate.currentDate())
self.sessionMain = False
if self.hold_data_add['addnew'].isSelected():
self.groupBox2.setTitle('Add New')
self.groupBox2.show()
self.sessionMain = True
self.sessionID = False
else:
self.sessionMain = False
r = None
for i in self.hold_data_add_item:
if self.hold_data_add_item[i].isSelected():
r = i
if r:
g = Db()
v = g.selectn('session', '', 1, {'id': r})
vname = str(v['name']).upper() + ' Session'
self.groupBox2.setTitle('ADD ' + str(vname) + ' Term')
self.sessionID = r
self.groupBox2.show()
else:
self.groupBox2.setTitle('Add')
self.sessionID = False
self.groupBox2.hide()
def setActive(self):
g = Db()
for i in self.hold_data:
if self.hold_data[i].checkState(0) == Qt.Checked:
g.update('datas', {'active': 0}, {'id': i})
else:
g.update('datas', {'active': 1}, {'id': i})
def button_add(self):
s1 = self.le1.text()
_datef = self.fromData.date().toPyDate()
_datef = time.mktime(_datef.timetuple())
_datee = self.toData.date().toPyDate()
_datee = time.mktime(_datee.timetuple())
g = Db()
if self.sessionID and self.sessionID > 0:
try:
if (len(s1) > 0):
y = {
'name': s1.lower(),
'start_date': _datef,
'sessionID': self.sessionID,
'end_date': _datee,
'active': 0
}
z = g.insert('terms', y)
if z and z > 0:
g.createClass(z)
g.createSubject(z)
g.createFee(z)
g.createPay(z)
g.createResult(z)
g.createAffective(z)
g.createPsychomoto(z)
self.makeTree()
self.button_reset()
self.par.menuSession()
self.par.dropdownSession()
else:
pass
except:
pass
else:
try:
if (len(s1) > 0):
y = {
'name': s1.lower(),
'start_date': _datef,
'end_date': _datee,
'active': 0
}
z = g.insert('session', y)
if z and z > 0:
g.createExpenses(z)
g.createStores(z)
g.createAwards(z)
g.createConducts(z)
g.createMails(z)
g.createMedicals(z)
self.makeTree()
self.button_reset()
self.par.menuSession()
self.par.dropdownSession()
else:
pass
except:
pass
def button_save(self):
row = self.editrow
s1 = self.le1.text()
_datef = self.fromData.date().toPyDate()
_datef = time.mktime(_datef.timetuple())
_datee = self.toData.date().toPyDate()
_datee = time.mktime(_datee.timetuple())
g = Db()
if (len(s1) > 0) and row and row > 0:
if self.sessionID and self.sessionID > 0:
try:
if (len(s1) > 0):
y = {
'name': s1.lower(),
'start_date': _datef,
'sessionID': self.sessionID,
'end_date': _datee,
'active': 0
}
k = {'id': row}
g.update('terms', y, k)
z = row
if z and z > 0:
g.createClass(z)
g.createSubject(z)
g.createFee(z)
g.createPay(z)
g.createResult(z)
g.createAffective(z)
g.createPsychomoto(z)
self.makeTree()
self.button_reset()
self.par.menuSession()
self.par.dropdownSession()
else:
pass
except:
pass
else:
try:
if (len(s1) > 0):
y = {
'name': s1.lower(),
'start_date': _datef,
'end_date': _datee,
'active': 0
}
k = {'id': row}
g.update('session', y, k)
z = row
if z and z > 0:
g.createExpenses(z)
g.createStores(z)
g.createAwards(z)
g.createConducts(z)
g.createMails(z)
g.createMedicals(z)
self.makeTree()
self.button_reset()
self.par.menuSession()
self.par.dropdownSession()
else:
pass
except:
pass
def button_delete(self):
row = self.getSelected()
g = Db()
try:
if row and row > 0:
y = {'abbrv': '', 'active': 2}
z = {'id': row}
g.update('datas', y, z)
self.makeTree()
else:
pass
except:
pass
def button_reset(self):
self.le1.clear()
currentDate = QDate()
self.fromData.setDate(currentDate.currentDate())
self.toData.setDate(currentDate.currentDate())
self.groupBox2.setTitle('Add')
self.groupBox2.hide()
self.pb.show()
self.pb4.hide()
def button_edit(self):
row = self.getSelected()
currentDate = QDate()
if row:
self.editrow = row
g = Db()
if self.sessionMain:
data = g.selectn('session', '', 1, {'id': row})
data_name = str(data['name'])
self.groupBox2.setTitle('Edit')
self.sessionID = False
else:
data = g.selectn('terms', '', 1, {'id': row})
data_sess = g.selectn('session', '', 1,
{'id': data['sessionID']})
data_name = str(data['name'])
self.sessionID = data['sessionID']
self.groupBox2.setTitle('Edit ' + str(data_sess['name']))
try:
self.le1.setText(data_name)
except:
self.le1.setText('')
try:
self.fromData.setDate(data['start_date'])
except:
self.fromData.setDate(currentDate.currentDate())
try:
self.toData.setDate(data['end_date'])
except:
self.toData.setDate(currentDate.currentDate())
self.pb.hide()
self.pb4.show()
def button_close(self):
self.close()
def restore_default_values_page(self):
"""Setup UI for default values setting."""
# Clear parameters so it doesn't add parameters when
# restore from changes.
if self.default_value_parameters:
self.default_value_parameters = []
if self.default_value_parameter_containers:
self.default_value_parameter_containers = []
default_fields = all_default_fields()
for field_group in all_field_groups:
settable_fields = []
for field in field_group['fields']:
if field not in default_fields:
continue
else:
settable_fields.append(field)
default_fields.remove(field)
if not settable_fields:
continue
# Create group box for each field group
group_box = QGroupBox(self)
group_box.setTitle(field_group['name'])
self.container_layout.addWidget(group_box)
parameters = []
for settable_field in settable_fields:
parameter = self.default_field_to_parameter(settable_field)
if parameter:
parameters.append(parameter)
parameter_container = ParameterContainer(
parameters, description_text=field_group['description'])
parameter_container.setup_ui(must_scroll=False)
group_box_inner_layout = QVBoxLayout()
group_box_inner_layout.addWidget(parameter_container)
group_box.setLayout(group_box_inner_layout)
# Add to attribute
self.default_value_parameter_containers.append(parameter_container)
# Only show non-groups default fields if there is one
if len(default_fields) > 0:
for default_field in default_fields:
parameter = self.default_field_to_parameter(default_field)
if parameter:
self.default_value_parameters.append(parameter)
description_text = tr(
'In this options you can change the global default values for '
'these variables.')
parameter_container = ParameterContainer(
self.default_value_parameters,
description_text=description_text)
parameter_container.setup_ui(must_scroll=False)
self.other_group_box = QGroupBox(tr('Non-group fields'))
other_group_inner_layout = QVBoxLayout()
other_group_inner_layout.addWidget(parameter_container)
self.other_group_box.setLayout(other_group_inner_layout)
self.container_layout.addWidget(self.other_group_box)
# Add to attribute
self.default_value_parameter_containers.append(parameter_container)
class ViewDataToolsHistory(QMainWindow):
def __init__(self, parent=None):
super(ViewDataToolsHistory, self).__init__(parent)
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# DATATOOLS HISTORY WINDOWS:
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
self.setWindowTitle(ui_strings.DATATOOLS_HISTORY_TITLE)
self._width = 700
self._height = 380
self._left_margin = 10
self.resize(self._width, self._height)
size_policy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
size_policy.setHorizontalStretch(0)
size_policy.setVerticalStretch(0)
size_policy.setHeightForWidth(self.sizePolicy().hasHeightForWidth())
self.setSizePolicy(size_policy)
self.setMinimumSize(QtCore.QSize(self._width, self._height))
self.setMaximumSize(QtCore.QSize(self._width, self._height))
self.setWindowIcon(QIcon(resources.ICON_LOGO))
# central widget
self.central_widget = QWidget(self)
# toolbar
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# add toolbar options
self.export_action = QAction(QIcon(resources.ICON_EXPORT),
'Export (Ctrl+E)', self)
self.export_action.setShortcut('Ctrl+E')
self.print_action = QAction(QIcon(resources.ICON_PRINT),
'Print (Ctrl+P)', self)
self.print_action.setShortcut('Ctrl+P')
self.toolbar = self.addToolBar('Options')
self.toolbar.addAction(self.export_action)
self.toolbar.addAction(self.print_action)
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# group input files
self.group_period = QGroupBox(self.central_widget)
self.group_period.setGeometry(
QtCore.QRect(self._left_margin, 10, 250, 50))
self.group_period.setTitle(ui_strings.DATATOOLS_HISTORY_FILTER)
# group by:
self.group_group_by = QGroupBox(self.central_widget)
self.group_group_by.setGeometry(QtCore.QRect(270, 10, 250, 50))
self.group_group_by.setTitle(ui_strings.DATATOOLS_HISTORY_GROUP)
# group by: errors
self.rbtn_by_errors = QRadioButton(
ui_strings.DATATOOLS_HISTORY_GROUP_ERROR, self.group_group_by)
self.rbtn_by_errors.setGeometry(QtCore.QRect(10, 10, 80, 50))
# group by: status
#self.group_by_status = QRadioButton(ui_strings.DATATOOLS_HISTORY_GROUP_STATUS, self.group_group_by)
#self.group_by_status.setGeometry(QtCore.QRect(100, 10, 80, 50))
# group by: no group
#self.group_by_no = QRadioButton(ui_strings.DATATOOLS_HISTORY_GROUP_NO, self.group_group_by)
#self.group_by_no.setGeometry(QtCore.QRect(190, 10, 80, 50))
# push button to update table
#self.btn_view_group = QPushButton(self.group_group_by)
#self.btn_view_group.setGeometry(QtCore.QRect(160, 20, 50, 20))
#self.btn_view_group.setText(ui_strings.DATATOOLS_HISTORY_VIEW)
# combobox periods
self.cbo_period = QComboBox(self.group_period)
self.cbo_period.setGeometry(
QtCore.QRect(self._left_margin, 20, 130, 20))
# push button to update table
#self.btn_view = QPushButton(self.group_period)
#self.btn_view.setGeometry(QtCore.QRect(160, 20, 50, 20))
#self.btn_view.setText(ui_strings.DATATOOLS_HISTORY_VIEW)
# table history
self.tbl_uploads = QTableWidget(self.central_widget)
self.tbl_uploads.setGeometry(
QtCore.QRect(self._left_margin, 70, 680, 120))
# chart
self.plot_widget = PlotWidget(self.central_widget, 8, 2)
self.plot_widget.setGeometry(
QtCore.QRect(self._left_margin, 200, 680, 130))
# records - "x records found"
self.setCentralWidget(self.central_widget)
class Main(plugin.Plugin):
" Main Class "
def initialize(self, *args, **kwargs):
" Init Main Class "
super(Main, self).initialize(*args, **kwargs)
self.process = QProcess()
self.process.readyReadStandardOutput.connect(self.readOutput)
self.process.readyReadStandardError.connect(self.readErrors)
self.process.finished.connect(self._process_finished)
self.process.error.connect(self._process_finished)
# directory auto completer
self.completer, self.dirs = QCompleter(self), QDirModel(self)
self.dirs.setFilter(QDir.AllEntries | QDir.NoDotAndDotDot)
self.completer.setModel(self.dirs)
self.completer.setCaseSensitivity(Qt.CaseInsensitive)
self.completer.setCompletionMode(QCompleter.PopupCompletion)
self.group0 = QGroupBox()
self.group0.setTitle(' Source ')
self.source, self.infile = QComboBox(), QLineEdit(path.expanduser("~"))
self.source.addItems(['Local File', 'Remote URL'])
self.source.currentIndexChanged.connect(self.on_source_changed)
self.infile.setPlaceholderText(' /full/path/to/file.html ')
self.infile.setCompleter(self.completer)
self.open = QPushButton(QIcon.fromTheme("folder-open"), 'Open')
self.open.setCursor(QCursor(Qt.PointingHandCursor))
self.open.clicked.connect(lambda: self.infile.setText(
str(
QFileDialog.getOpenFileName(
self.dock, "Open a File to read from", path.expanduser(
"~"), ';;'.join([
'{}(*.{})'.format(e.upper(), e) for e in
['html', 'webp', 'webm', 'svg', 'css', 'js', '*']
])))))
self.inurl, self.output = QLineEdit('http://www.'), QTextEdit()
self.inurl.setPlaceholderText(
'http://www.full/url/to/remote/file.html')
self.inurl.hide()
vboxg0 = QVBoxLayout(self.group0)
for each_widget in (self.source, self.infile, self.open, self.inurl):
vboxg0.addWidget(each_widget)
self.group1 = QGroupBox()
self.group1.setTitle(' Mobile ')
self.ckcss1 = QCheckBox('Run in full screen using current resolution')
self.ckcss2 = QCheckBox('Disable touch mode and use keypad mode')
self.ckcss3 = QCheckBox(
'Disable touch mode but allow to use the mouse')
self.ckcss4 = QCheckBox(
'Enable mouse,disable pointer & zoom emulation')
self.ckcss5 = QCheckBox('Start the Mobile version of the browser')
self.ckcss6 = QCheckBox('Start the Tablet version of the browser')
self.ckcss7 = QCheckBox('Emulate hardware with Menu and Back keys')
self.ckcss8 = QCheckBox('Start the browser in Kiosk mode')
self.width, self.height = QSpinBox(), QSpinBox()
self.zoom, self.ram, self.dpi = QSpinBox(), QSpinBox(), QSpinBox()
self.cpulag, self.gpulag = QSpinBox(), QSpinBox()
self.lang, self.agent = QComboBox(), QComboBox()
self.lang.addItems(['EN', 'ES', 'PT', 'JA', 'ZH', 'DE', 'RU', 'FR'])
self.agent.addItems(['Default', 'Android', 'MeeGo', 'Desktop'])
self.fonts = QLineEdit()
self.width.setMaximum(9999)
self.width.setMinimum(100)
self.width.setValue(480)
self.height.setMaximum(9999)
self.height.setMinimum(100)
self.height.setValue(800)
self.zoom.setMaximum(999)
self.zoom.setMinimum(1)
self.zoom.setValue(100)
self.ram.setMaximum(999)
self.ram.setMinimum(1)
self.ram.setValue(100)
self.dpi.setMaximum(200)
self.dpi.setMinimum(50)
self.dpi.setValue(96)
self.cpulag.setMaximum(9999)
self.cpulag.setMinimum(0)
self.cpulag.setValue(1)
self.gpulag.setMaximum(9999)
self.gpulag.setMinimum(0)
self.gpulag.setValue(1)
vboxg1 = QVBoxLayout(self.group1)
for each_widget in (
self.ckcss1, self.ckcss2, self.ckcss3, self.ckcss4,
self.ckcss5, self.ckcss6, self.ckcss7, self.ckcss8,
QLabel('Width Pixels of the emulated device screen'),
self.width,
QLabel('Height Pixels of the emulated device screen'),
self.height,
QLabel('Zoom Percentage of emulated screen'), self.zoom,
QLabel('RAM MegaBytes of the emulated device'), self.ram,
QLabel('Language of the emulated device'), self.lang,
QLabel('D.P.I. of the emulated device'), self.dpi,
QLabel('User-Agent of the emulated device'), self.agent,
QLabel('CPU Core Lag Miliseconds of emulated device'),
self.cpulag,
QLabel('GPU Video Lag Miliseconds of emulated device'),
self.gpulag, QLabel('Extra Fonts Directory Full Path'),
self.fonts):
vboxg1.addWidget(each_widget)
self.group2 = QGroupBox()
self.group2.setTitle(' General ')
self.nice, self.opera = QSpinBox(), QLineEdit(path.expanduser("~"))
self.nice.setValue(20)
self.nice.setMaximum(20)
self.nice.setMinimum(0)
self.opera.setCompleter(self.completer)
if path.exists(CONFIG_FILE):
with codecs.open(CONFIG_FILE, encoding='utf-8') as fp:
self.opera.setText(fp.read())
self.open2 = QPushButton(QIcon.fromTheme("folder-open"), 'Open')
self.open2.setCursor(QCursor(Qt.PointingHandCursor))
self.open2.clicked.connect(lambda: self.opera.setText(
str(
QFileDialog.getOpenFileName(
self.dock, "Open Opera Mobile Emulator",
path.expanduser("~"),
'Opera Mobile Emulator Executable(opera-mobile-emulator)'))
))
self.help1 = QLabel('''<a href=
"http://www.opera.com/developer/mobile-emulator">
<small><center>Download Opera Mobile Emulator !</a>''')
self.help1.setTextInteractionFlags(Qt.LinksAccessibleByMouse)
self.help1.setOpenExternalLinks(True)
vboxg4 = QVBoxLayout(self.group2)
for each_widget in (QLabel(' Backend CPU priority: '), self.nice,
QLabel(' Opera Mobile Emulator Full Path: '),
self.opera, self.open2, self.help1):
vboxg4.addWidget(each_widget)
self.button = QPushButton('Preview on Mobile')
self.button.setCursor(QCursor(Qt.PointingHandCursor))
self.button.setMinimumSize(100, 50)
self.button.clicked.connect(self.run)
glow = QGraphicsDropShadowEffect(self)
glow.setOffset(0)
glow.setBlurRadius(99)
glow.setColor(QColor(99, 255, 255))
self.button.setGraphicsEffect(glow)
glow.setEnabled(True)
class TransientWidget(QWidget):
' persistant widget thingy '
def __init__(self, widget_list):
' init sub class '
super(TransientWidget, self).__init__()
vbox = QVBoxLayout(self)
for each_widget in widget_list:
vbox.addWidget(each_widget)
tw = TransientWidget((
QLabel('<b>Mobile Browser Emulator'),
self.group0,
self.group1,
self.group2,
self.output,
self.button,
))
self.scrollable, self.dock = QScrollArea(), QDockWidget()
self.scrollable.setWidgetResizable(True)
self.scrollable.setWidget(tw)
self.dock.setWindowTitle(__doc__)
self.dock.setStyleSheet('QDockWidget::title{text-align: center;}')
self.dock.setWidget(self.scrollable)
ExplorerContainer().addTab(self.dock, "Mobile")
QPushButton(
QIcon.fromTheme("help-about"), 'About', self.dock).clicked.connect(
lambda: QMessageBox.information(self.dock, __doc__, HELPMSG))
def run(self):
' run the string replacing '
self.output.clear()
self.button.setEnabled(False)
self.output.append(self.formatInfoMsg('INFO:{}'.format(
datetime.now())))
if self.source.currentText() == 'Local File':
target = 'file://' + str(self.infile.text()).strip()
else:
target = self.inurl.text()
self.output.append(self.formatInfoMsg(' INFO: OK: Parsing Arguments'))
cmd = ' '.join(
('nice --adjustment={}'.format(self.nice.value()), '"{}"'.format(
self.opera.text()),
'-fullscreen' if self.ckcss1.isChecked() is True else '',
'-notouch' if self.ckcss2.isChecked() is True else '',
'-notouchwithtouchevents' if self.ckcss3.isChecked() is True else
'', '-usemouse' if self.ckcss4.isChecked() is True else '',
'-mobileui' if self.ckcss5.isChecked() is True else '',
'-tabletui' if self.ckcss6.isChecked() is True else '',
'-hasmenuandback' if self.ckcss7.isChecked() is True else '',
'-k' if self.ckcss8.isChecked() is True else '',
'-displaysize {}x{}'.format(
self.width.value(),
self.height.value()), '-displayzoom {}'.format(
self.zoom.value()), '-mem {}M'.format(self.ram.value()),
'-lang {}'.format(self.lang.currentText()), '-ppi {}'.format(
self.dpi.value()), '-extra-fonts {}'.format(self.fonts.text())
if str(self.fonts.text()).strip() is not '' else '',
'-user-agent-string {}'.format(
self.agent.currentText()), '-delaycorethread {}'.format(
self.cpulag.value()), '-delayuithread {}'.format(
self.gpulag.value()), '-url "{}"'.format(target)))
self.output.append(self.formatInfoMsg(
'INFO:OK:Command:{}'.format(cmd)))
self.process.start(cmd)
if not self.process.waitForStarted():
self.output.append(self.formatErrorMsg(' ERROR: FAIL: Meh. '))
self.output.append(
self.formatErrorMsg(
'ERROR: FAIL: Failed with Arguments: {} '.format(cmd)))
self.button.setEnabled(True)
return
self.output.setFocus()
self.output.selectAll()
self.button.setEnabled(True)
def on_source_changed(self):
' do something when the desired source has changed '
if self.source.currentText() == 'Local File':
self.open.show()
self.infile.show()
self.inurl.hide()
else:
self.inurl.show()
self.open.hide()
self.infile.hide()
def _process_finished(self):
""" finished sucessfully """
self.output.append(self.formatInfoMsg('INFO:{}'.format(
datetime.now())))
self.output.selectAll()
self.output.setFocus()
def readOutput(self):
"""Read and append output to the logBrowser"""
self.output.append(str(self.process.readAllStandardOutput()).strip())
def readErrors(self):
"""Read and append errors to the logBrowser"""
self.output.append(
self.formatErrorMsg(str(self.process.readAllStandardError())))
def formatErrorMsg(self, msg):
"""Format error messages in red color"""
return self.formatMsg(msg, 'red')
def formatInfoMsg(self, msg):
"""Format informative messages in blue color"""
return self.formatMsg(msg, 'green')
def formatMsg(self, msg, color):
"""Format message with the given color"""
return '<font color="{}">{}</font>'.format(color, msg)
def finish(self):
' save when finish '
with codecs.open(CONFIG_FILE, "w", encoding='utf-8') as fp:
fp.write(self.opera.text())
def buildMixer(self):
log.debug("Building mixer")
self.MatrixButtonControls={}
self.MatrixRotaryControls={}
self.MatrixVolumeControls={}
self.VolumeControls={}
self.SelectorControls={}
self.SPDIFmodeControls={}
self.TriggerControls={}
nb_pys_out = self.hw.getDiscrete("/HwInfo/PhysicalAudioOutCount")
nb_pys_in = self.hw.getDiscrete("/HwInfo/PhysicalAudioInCount")
outputtabslayout = QHBoxLayout( self )
outputtabs = QTabWidget(self)
outputtabslayout.addWidget( outputtabs, 1 )
for outpair in range(nb_pys_out/2):
tab = QWidget( outputtabs )
tablayout = QHBoxLayout( tab )
grpMonitor = QGroupBox(tab)
tablayout.addWidget(grpMonitor)
grpPlayback = QGroupBox(tab)
tablayout.addWidget(grpPlayback)
grpOutput = QGroupBox(tab)
tablayout.addWidget(grpOutput)
grpMonitor.setTitle("Monitor")
grpPlayback.setTitle("Playback")
grpOutput.setTitle("Output")
# monitor controls
grpMonitorLayout = QHBoxLayout()
grpMonitor.setLayout(grpMonitorLayout);
output_id = outpair * 2
for inpair in range(nb_pys_in/2):
# create GUI elements
strip = AfMonitorWidget( grpMonitor )
grpMonitorLayout.addWidget( strip, 1 )
input_id = inpair*2
strip.lblName.setText("IN %d/%d" % (input_id+1, input_id+2))
# add the elements to the control structure
self.MatrixButtonControls[strip.btnMute0] = ['/Mixer/MonitorMute', input_id, output_id]
self.MatrixButtonControls[strip.btnMute1] = ['/Mixer/MonitorMute', input_id + 1, output_id + 1]
self.MatrixButtonControls[strip.btnSolo0] = ['/Mixer/MonitorSolo', input_id, output_id]
self.MatrixButtonControls[strip.btnSolo1] = ['/Mixer/MonitorSolo', input_id + 1, output_id + 1]
self.MatrixRotaryControls[strip.rotPan0] = ['/Mixer/MonitorPan', input_id, output_id]
self.MatrixRotaryControls[strip.rotPan1] = ['/Mixer/MonitorPan', input_id + 1, output_id + 1]
self.MatrixVolumeControls[strip.sldGain0] = ['/Mixer/MonitorGain', input_id, output_id]
self.MatrixVolumeControls[strip.sldGain1] = ['/Mixer/MonitorGain', input_id + 1, output_id + 1]
# playback
grpPlaybackLayout = QHBoxLayout()
grpPlayback.setLayout(grpPlaybackLayout);
strip = AfMonitorWidget( grpPlayback )
grpPlaybackLayout.addWidget(strip, 1)
strip.lblName.setText("Playback %d/%d" % (output_id+1, output_id+2))
self.VolumeControls[strip.sldGain0] = ["/Mixer/PC%dGain" % (output_id)]
self.VolumeControls[strip.sldGain1] = ["/Mixer/PC%dGain" % (output_id+1)]
self.SelectorControls[strip.btnMute0] = ["/Mixer/PC%dMute" % (output_id)]
self.SelectorControls[strip.btnMute1] = ["/Mixer/PC%dMute" % (output_id+1)]
self.SelectorControls[strip.btnSolo0] = ["/Mixer/PC%dSolo" % (output_id)]
self.SelectorControls[strip.btnSolo1] = ["/Mixer/PC%dSolo" % (output_id+1)]
# fix up mixer strip gui
strip.rotPan0.hide()
strip.rotPan1.hide()
# output
grpOutputLayout = QHBoxLayout()
grpOutput.setLayout(grpOutputLayout);
strip = AfMonitorWidget( grpOutput )
grpOutputLayout.addWidget(strip, 1)
strip.lblName.setText("Output %d/%d" % (output_id+1, output_id+2))
self.VolumeControls[strip.sldGain0] = ["/Mixer/OUT%dGain" % (output_id)]
self.VolumeControls[strip.sldGain1] = ["/Mixer/OUT%dGain" % (output_id+1)]
self.SelectorControls[strip.btnMute0] = ["/Mixer/OUT%dMute" % (output_id)]
self.SelectorControls[strip.btnMute1] = ["/Mixer/OUT%dMute" % (output_id+1)]
self.SelectorControls[strip.btnSolo0] = ["/Mixer/OUT%dNominal" % (output_id)]
self.SelectorControls[strip.btnSolo1] = ["/Mixer/OUT%dNominal" % (output_id+1)]
# fix up mixer strip gui
strip.btnSolo0.setText("Pad")
strip.btnSolo1.setText("Pad")
strip.rotPan0.hide()
strip.rotPan1.hide()
# add the tab
outputtabs.addTab( tab, "OUT %d/%d" % (output_id+1, output_id+2))
# add an input config tab
tab = QWidget( outputtabs )
tablayout = QHBoxLayout( tab )
for inpair in range(nb_pys_in):
# create GUI elements
log.debug("strip")
grpInput = QGroupBox(tab)
tablayout.addWidget(grpInput)
grpInput.setTitle("IN %d" % (inpair+1))
grpInputLayout = QVBoxLayout()
grpInput.setLayout(grpInputLayout);
label = QLabel( grpInput )
grpInputLayout.addWidget( label )
label.setText("frienlyname %d" % (inpair+1))
label.setAlignment(Qt.AlignCenter)
btn = QPushButton( grpInput )
grpInputLayout.addWidget( btn )
btn.setText("Pad")
btn.setCheckable(True)
self.SelectorControls[btn] = ["/Mixer/IN%dNominal" % (inpair)]
spacer = QSpacerItem(1,1,QSizePolicy.Minimum,QSizePolicy.Expanding)
grpInputLayout.addItem(spacer)
outputtabs.addTab( tab, "INPUT")
# add an settings tab
tab = QWidget( outputtabs )
tablayout = QHBoxLayout( tab )
outputtabs.addTab( tab, "SETTINGS")
settings = AfSettingsWidget( tab )
has_sw_phantom = self.hw.getDiscrete("/HwInfo/PhantomPower")
if has_sw_phantom:
self.SelectorControls[settings.btnPhantom] = ["/PhantomPower"]
else:
settings.btnPhantom.hide()
self.TriggerControls[settings.btnSaveSettings] = ["/SaveSettings"]
self.TriggerControls[settings.btnIdentify] = ["/Identify"]
self.SPDIFmodeControls[settings.radioConsumer] = ["/SpdifMode", 0]
self.SPDIFmodeControls[settings.radioProfessional] = ["/SpdifMode", 1]
def buildMixer(self):
log.debug("Building mixer")
self.MatrixButtonControls = {}
self.MatrixRotaryControls = {}
self.MatrixVolumeControls = {}
self.VolumeControls = {}
self.SelectorControls = {}
self.SPDIFmodeControls = {}
self.TriggerControls = {}
self.DigIfaceControls = {}
self.PlbkRouteControls = {}
self.StreamMonitors = []
nb_pys_out = self.hw.getDiscrete("/HwInfo/PhysicalAudioOutCount")
nb_pys_in = self.hw.getDiscrete("/HwInfo/PhysicalAudioInCount")
outputtabslayout = QHBoxLayout(self)
outputtabs = QTabWidget(self)
outputtabslayout.addWidget(outputtabs, 1)
for outpair in range(int(nb_pys_out / 2)):
tab = QWidget(outputtabs)
tablayout = QHBoxLayout(tab)
grpMonitor = QGroupBox(tab)
tablayout.addWidget(grpMonitor)
grpPlayback = QGroupBox(tab)
tablayout.addWidget(grpPlayback)
grpOutput = QGroupBox(tab)
tablayout.addWidget(grpOutput)
grpMonitor.setTitle("Monitor")
grpPlayback.setTitle("Playback")
grpOutput.setTitle("Output")
# monitor controls
grpMonitorLayout = QHBoxLayout()
grpMonitor.setLayout(grpMonitorLayout)
output_id = outpair * 2
for inpair in range(int(nb_pys_in / 2)):
# create GUI elements
strip = AfMonitorWidget(grpMonitor)
grpMonitorLayout.addWidget(strip, 1)
input_id = inpair * 2
strip.lblName.setText("In %d/%d" %
(input_id + 1, input_id + 2))
# add the elements to the control structure
self.MatrixButtonControls[strip.btnMute0] = [
'/Mixer/MonitorMute', input_id, output_id
]
self.MatrixButtonControls[strip.btnMute1] = [
'/Mixer/MonitorMute', input_id + 1, output_id + 1
]
self.MatrixButtonControls[strip.btnSolo0] = [
'/Mixer/MonitorSolo', input_id, output_id
]
self.MatrixButtonControls[strip.btnSolo1] = [
'/Mixer/MonitorSolo', input_id + 1, output_id + 1
]
self.MatrixRotaryControls[strip.rotPan0] = [
'/Mixer/MonitorPan', input_id, output_id
]
self.MatrixRotaryControls[strip.rotPan1] = [
'/Mixer/MonitorPan', input_id + 1, output_id + 1
]
self.MatrixVolumeControls[strip.sldGain0] = [
'/Mixer/MonitorGain', input_id, output_id
]
self.MatrixVolumeControls[strip.sldGain1] = [
'/Mixer/MonitorGain', input_id + 1, output_id + 1
]
# playback
grpPlaybackLayout = QHBoxLayout()
grpPlayback.setLayout(grpPlaybackLayout)
strip = AfMonitorWidget(grpPlayback)
grpPlaybackLayout.addWidget(strip, 1)
strip.lblName.setText("Playback %d/%d" %
(output_id + 1, output_id + 2))
self.StreamMonitors.append(strip)
self.VolumeControls[strip.sldGain0] = [
"/Mixer/PC%dGain" % (output_id)
]
self.VolumeControls[strip.sldGain1] = [
"/Mixer/PC%dGain" % (output_id + 1)
]
self.SelectorControls[strip.btnMute0] = [
"/Mixer/PC%dMute" % (output_id)
]
self.SelectorControls[strip.btnMute1] = [
"/Mixer/PC%dMute" % (output_id + 1)
]
self.SelectorControls[strip.btnSolo0] = [
"/Mixer/PC%dSolo" % (output_id)
]
self.SelectorControls[strip.btnSolo1] = [
"/Mixer/PC%dSolo" % (output_id + 1)
]
# fix up mixer strip gui
strip.rotPan0.hide()
strip.rotPan1.hide()
# output
grpOutputLayout = QHBoxLayout()
grpOutput.setLayout(grpOutputLayout)
strip = AfMonitorWidget(grpOutput)
grpOutputLayout.addWidget(strip, 1)
strip.lblName.setText("Output %d/%d" %
(output_id + 1, output_id + 2))
self.VolumeControls[strip.sldGain0] = [
"/Mixer/OUT%dGain" % (output_id)
]
self.VolumeControls[strip.sldGain1] = [
"/Mixer/OUT%dGain" % (output_id + 1)
]
self.SelectorControls[strip.btnMute0] = [
"/Mixer/OUT%dMute" % (output_id)
]
self.SelectorControls[strip.btnMute1] = [
"/Mixer/OUT%dMute" % (output_id + 1)
]
self.SelectorControls[strip.btnSolo0] = [
"/Mixer/OUT%dNominal" % (output_id)
]
self.SelectorControls[strip.btnSolo1] = [
"/Mixer/OUT%dNominal" % (output_id + 1)
]
# fix up mixer strip gui
strip.btnSolo0.setText("Pad")
strip.btnSolo1.setText("Pad")
strip.rotPan0.hide()
strip.rotPan1.hide()
# add the tab
outputtabs.addTab(tab,
"Out %d/%d" % (output_id + 1, output_id + 2))
# add an input config tab
tab = QWidget(outputtabs)
tablayout = QHBoxLayout(tab)
for inpair in range(nb_pys_in):
# create GUI elements
log.debug("strip")
grpInput = QGroupBox(tab)
tablayout.addWidget(grpInput)
grpInput.setTitle("In %d" % (inpair + 1))
grpInputLayout = QVBoxLayout()
grpInput.setLayout(grpInputLayout)
label = QLabel(grpInput)
grpInputLayout.addWidget(label)
label.setText("In %d" % (inpair + 1))
label.setAlignment(Qt.AlignCenter)
btn = QToolButton(grpInput)
grpInputLayout.addWidget(btn)
btn.setText("Pad")
btn.setCheckable(True)
self.SelectorControls[btn] = ["/Mixer/IN%dNominal" % (inpair)]
spacer = QSpacerItem(1, 1, QSizePolicy.Minimum,
QSizePolicy.Expanding)
grpInputLayout.addItem(spacer)
outputtabs.addTab(tab, "Input")
# add an settings tab
tab = QWidget(outputtabs)
tablayout = QHBoxLayout(tab)
outputtabs.addTab(tab, "Settings")
settings = AfSettingsWidget(tab)
has_sw_phantom = self.hw.getDiscrete("/HwInfo/PhantomPower")
if has_sw_phantom:
self.SelectorControls[settings.btnPhantom] = ["/PhantomPower"]
else:
settings.btnPhantom.hide()
has_opt_iface = self.hw.getDiscrete('/HwInfo/OpticalInterface')
if has_opt_iface:
self.DigIfaceControls[settings.cmbDigIface] = ['/DigitalInterface']
else:
settings.DigIface.hide()
has_plbk_route = self.hw.getDiscrete('/HwInfo/PlaybackRouting')
if has_plbk_route:
self.PlbkRouteControls[settings.cmbRoute1] = [
'/PlaybackRouting', 0
]
self.PlbkRouteControls[settings.cmbRoute2] = [
'/PlaybackRouting', 1
]
self.PlbkRouteControls[settings.cmbRoute3] = [
'/PlaybackRouting', 2
]
if self.configrom.getModelId() == 0x0AF2:
label_route2 = 'Headphone Out 1/2'
else:
label_route2 = 'Analog Out 3/4'
settings.labelRoute2.setText(label_route2)
else:
settings.PlbkRoute.hide()
self.TriggerControls[settings.btnSaveSettings] = ["/SaveSettings"]
self.TriggerControls[settings.btnIdentify] = ["/Identify"]
if self.configrom.getModelId() == 0x0AF12:
settings.spdifMode.hide()
else:
self.SPDIFmodeControls[settings.radioConsumer] = ["/SpdifMode", 0]
self.SPDIFmodeControls[settings.radioProfessional] = [
"/SpdifMode", 1
]
# Store a reference to the "save" button for later manipulation
self.btnSaveSettings = settings.btnSaveSettings
class ViewDataTools(QMainWindow):
def __init__(self, parent=None):
super(ViewDataTools, self).__init__(parent)
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# DATATOOLS WINDOWS:
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
self.setWindowTitle(ui_strings.DATATOOLS_TITLE)
self._width = 680
self._height = 560
self._left_margin = 10
self.resize(self._width, self._height)
size_policy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
size_policy.setHorizontalStretch(0)
size_policy.setVerticalStretch(0)
size_policy.setHeightForWidth(self.sizePolicy().hasHeightForWidth())
self.setSizePolicy(size_policy)
self.setMinimumSize(QtCore.QSize(self._width, self._height))
self.setMaximumSize(QtCore.QSize(self._width, self._height))
self.setWindowIcon(QIcon(resources.ICON_LOGO))
# central widget
self.central_widget = QWidget(self)
# DataTools description
self.lbl_description = QLabel(self.central_widget)
self.lbl_description.setGeometry(QtCore.QRect(0, 0, self._width, 30))
self.lbl_description.setAlignment(QtCore.Qt.AlignCenter)
self.lbl_description.setText(ui_strings.DATATOOLS_DESCRIPTION)
# group input files
self.group_input_file = QGroupBox(self.central_widget)
self.group_input_file.setGeometry(
QtCore.QRect(self._left_margin, 30, 660, 80))
self.group_input_file.setTitle(ui_strings.DATATOOLS_GROUP_INPUT)
# frame input files
self.frame_inputs = QFrame(self.group_input_file)
self.frame_inputs.setGeometry(
QtCore.QRect(self._left_margin, 0, 270, 80))
self.frame_inputs.setFrameShape(QFrame.StyledPanel)
self.frame_inputs.setFrameShadow(QFrame.Raised)
# label input type
self.lbl_input_type = QLabel(self.frame_inputs)
self.lbl_input_type.setGeometry(QtCore.QRect(20, 20, 60, 15))
self.lbl_input_type.setText(ui_strings.DATATOOLS_INPUT_TYPE)
# button xls
self.btn_xls = QToolButton(self.frame_inputs)
self.btn_xls.setGeometry(QtCore.QRect(20, 35, 35, 35))
icon_xls = QIcon()
icon_xls.addPixmap(QPixmap(resources.ICON_XLS), QIcon.Normal,
QIcon.Off)
self.btn_xls.setIcon(icon_xls)
self.btn_xls.setIconSize(QtCore.QSize(24, 24))
self.btn_xls.setCheckable(True)
self.btn_xls.setAutoExclusive(True)
self.btn_xls.setObjectName("xls_button")
# button csv
self.btn_csv = QToolButton(self.frame_inputs)
self.btn_csv.setGeometry(QtCore.QRect(60, 35, 35, 35))
icon_csv = QIcon()
icon_csv.addPixmap(QPixmap(resources.ICON_CSV), QIcon.Normal,
QIcon.Off)
self.btn_csv.setIcon(icon_csv)
self.btn_csv.setIconSize(QtCore.QSize(24, 24))
self.btn_csv.setCheckable(True)
self.btn_csv.setAutoExclusive(True)
self.btn_csv.setObjectName("csv_button")
# checkbox csv with headers
self.chk_csv_headers = QCheckBox(ui_strings.DATATOOLS_WITH_HEADERS,
self.frame_inputs)
self.chk_csv_headers.setGeometry(QtCore.QRect(100, 45, 110, 15))
self.chk_csv_headers.setEnabled(False)
# TextEdit + PushButton (FindFolder)
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# lbl sheet name
self.lbl_file_path = QLabel(self.group_input_file)
self.lbl_file_path.setGeometry(QtCore.QRect(250, 20, 120, 15))
self.lbl_file_path.setText(ui_strings.DATATOOLS_SELECT_FILE)
self.txt_file = QLineEdit(self.group_input_file)
self.txt_file.setGeometry(QtCore.QRect(250, 35, 160, 20))
self.txt_file.setReadOnly(True)
self.btn_path = QPushButton(self.group_input_file)
self.btn_path.setGeometry(QtCore.QRect(410, 34, 50, 22))
self.btn_path.setText(ui_strings.DATATOOLS_SELECT_BUTTON)
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# lbl sheet name
self.lbl_sheet_name = QLabel(self.group_input_file)
self.lbl_sheet_name.setGeometry(QtCore.QRect(500, 20, 120, 15))
self.lbl_sheet_name.setText(ui_strings.DATATOOLS_SHEET_NAME)
# Combobox select sheet - initially does not contain values
self.cbo_sheet = QComboBox(self.group_input_file)
self.cbo_sheet.setGeometry(QtCore.QRect(500, 35, 130, 20))
# data grid to visualize error messages
self.tbl_errors = QTableWidget(self.central_widget)
self.tbl_errors.setGeometry(
QtCore.QRect(self._left_margin, 420, 660, 100))
# data grid to visualize those records with errors.
self.tbl_uploaded_data = QTableWidget(self.central_widget)
self.tbl_uploaded_data.setGeometry(
QtCore.QRect(self._left_margin, 120, 500, 220))
# group run options
self.group_run_options = QGroupBox(self.central_widget)
self.group_run_options.setGeometry(QtCore.QRect(520, 120, 150, 220))
self.group_run_options.setTitle(ui_strings.DATATOOLS_GROUP_RUN)
# Errors summary:
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# group summary errors
self.group_errors = QGroupBox(self.central_widget)
self.group_errors.setGeometry(
QtCore.QRect(self._left_margin, 350, 660, 60))
self.group_errors.setTitle(ui_strings.DATATOOLS_HEADER_ERRORS)
# lbl records
self.lbl_records = QLabel(self.group_errors)
self.lbl_records.setGeometry(QtCore.QRect(165, 15, 80, 15))
self.lbl_records.setAlignment(QtCore.Qt.AlignCenter)
self.lbl_records.setText(ui_strings.DATATOOLS_RECORDS)
self.txt_records = QLineEdit(self.group_errors)
self.txt_records.setGeometry(QtCore.QRect(165, 30, 80, 20))
self.txt_records.setAlignment(QtCore.Qt.AlignCenter)
self.txt_records.setReadOnly(True)
# lbl errors
self.lbl_errors = QLabel(self.group_errors)
self.lbl_errors.setGeometry(QtCore.QRect(275, 15, 80, 15))
self.lbl_errors.setAlignment(QtCore.Qt.AlignCenter)
self.lbl_errors.setText(ui_strings.DATATOOLS_ERRORS)
self.txt_errors = QLineEdit(self.group_errors)
self.txt_errors.setGeometry(QtCore.QRect(275, 30, 80, 20))
self.txt_errors.setAlignment(QtCore.Qt.AlignCenter)
self.txt_errors.setReadOnly(True)
# lbl time
self.lbl_time = QLabel(self.group_errors)
self.lbl_time.setGeometry(QtCore.QRect(385, 15, 80, 15))
self.lbl_time.setAlignment(QtCore.Qt.AlignCenter)
self.lbl_time.setText(ui_strings.DATATOOLS_TIME)
self.txt_time = QLineEdit(self.group_errors)
self.txt_time.setGeometry(QtCore.QRect(385, 30, 80, 20))
self.txt_time.setAlignment(QtCore.Qt.AlignCenter)
self.txt_time.setReadOnly(True)
# history button
self.btn_history = QToolButton(self.group_errors)
self.btn_history.setGeometry(QtCore.QRect(500, 25, 100, 25))
icon_history = QIcon()
icon_history.addPixmap(QPixmap(resources.ICON_HISTORY), QIcon.Normal,
QIcon.Off)
self.btn_history.setIcon(icon_history)
self.btn_history.setIconSize(QtCore.QSize(20, 20))
self.btn_history.setToolButtonStyle(QtCore.Qt.ToolButtonTextBesideIcon)
self.btn_history.setText(ui_strings.DATATOOLS_HISTORY)
self.btn_history.setCheckable(True)
self.btn_history.setAutoExclusive(True)
self.btn_history.setObjectName("history_button")
# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# btn data uploader
self.btn_data_uploader = QPushButton(
ui_strings.DATATOOLS_DATA_UPLOADER, self.group_run_options)
self.btn_data_uploader.setGeometry(QtCore.QRect(10, 120, 90, 25))
self.btn_data_uploader.setCheckable(True)
self.btn_data_uploader.setAutoExclusive(True)
self.btn_data_uploader.setFlat(False)
# btn data testing
self.btn_data_testing = QPushButton(ui_strings.DATATOOLS_DATA_TESTING,
self.group_run_options)
self.btn_data_testing.setEnabled(False)
self.btn_data_testing.setGeometry(QtCore.QRect(10, 150, 90, 25))
self.btn_data_testing.setCheckable(True)
self.btn_data_testing.setAutoExclusive(True)
# btn data to database
self.btn_data_db = QPushButton(ui_strings.DATATOOLS_DATA_DB,
self.group_run_options)
self.btn_data_db.setEnabled(False)
self.btn_data_db.setGeometry(QtCore.QRect(10, 179, 91, 23))
self.btn_data_db.setCheckable(True)
self.btn_data_db.setAutoExclusive(True)
# frame run options
self.frame_run = QFrame(self.group_run_options)
self.frame_run.setGeometry(QtCore.QRect(10, 30, 130, 80))
self.frame_run.setFrameShape(QFrame.StyledPanel)
self.frame_run.setFrameShadow(QFrame.Raised)
# option process until first error
self.rbtn_process_error = QRadioButton(
ui_strings.DATATOOLS_PROCESS_ERROR, self.frame_run)
self.rbtn_process_error.setGeometry(QtCore.QRect(0, 0, 150, 20))
# option process all data
self.rbtn_process_all = QRadioButton(ui_strings.DATATOOLS_PROCESS_ALL,
self.frame_run)
self.rbtn_process_all.setGeometry(QtCore.QRect(0, 20, 150, 30))
# checkbox to filter by records with errors.
#self.chk_filter_errors = QCheckBox(ui_strings.DATATOOLS_FILTER_ERRORS, self.frame_run)
#self.chk_filter_errors.setGeometry(QtCore.QRect(0, 50, 100, 15))
#self.chk_filter_errors.setEnabled(False)
# icons -> pass - error: Initially are empty labels
# if not started -> ICON_MINI_WAIT
# if error -> ICON_DELETE
# if pass -> ICON_CHECK
# state icon data uploader
self.lbl_state_du = QLabel(self.group_run_options)
self.lbl_state_du.setGeometry(QtCore.QRect(110, 120, 20, 20))
self.lbl_state_du.setPixmap(QPixmap(resources.ICON_MINI_WAIT))
self.lbl_state_du.setScaledContents(True)
# state icon data to database
self.lbl_state_dt = QLabel(self.group_run_options)
self.lbl_state_dt.setGeometry(QtCore.QRect(110, 150, 20, 20))
self.lbl_state_dt.setPixmap(QPixmap(resources.ICON_MINI_WAIT))
self.lbl_state_dt.setScaledContents(True)
# state icon data testing
self.lbl_state_db = QLabel(self.group_run_options)
self.lbl_state_db.setGeometry(QtCore.QRect(110, 180, 20, 20))
self.lbl_state_db.setPixmap(QPixmap(resources.ICON_MINI_WAIT))
self.lbl_state_db.setScaledContents(True)
# progress bar
self.progress_bar = QProgressBar(self.central_widget)
self.progress_bar.setGeometry(
QtCore.QRect(self._left_margin, 530, 660, 15))
self.progress_bar.setMaximum(100)
self.progress_bar.setProperty("value", 0)
self.progress_bar.setTextVisible(True)
self.progress_bar.setOrientation(QtCore.Qt.Horizontal)
self.progress_bar.setInvertedAppearance(False)
self.progress_bar.setTextDirection(QProgressBar.TopToBottom)
self.setCentralWidget(self.central_widget)
def __init__(self):
' make a diff method with GUI '
self.dialog = QDialog()
self.diff_path = None
# directory auto completer
self.completer = QCompleter(self.dialog)
self.dirs = QDirModel(self.dialog)
self.dirs.setFilter(QDir.AllEntries | QDir.NoDotAndDotDot)
self.completer.setModel(self.dirs)
self.completer.setCaseSensitivity(Qt.CaseInsensitive)
self.completer.setCompletionMode(QCompleter.PopupCompletion)
#self.completer.setCompletionMode(QCompleter.InlineCompletion)
self.group1 = QGroupBox()
self.group1.setTitle('Diff')
self.frmt = QComboBox(self.group1)
self.frmt.addItems(['Unified', 'Normal', 'Context'])
self.file1 = QLineEdit()
self.file1.setPlaceholderText('/full/path/to/one_file.py')
self.file1.setCompleter(self.completer)
self.file2 = QLineEdit()
self.file2.setPlaceholderText('/full/path/to/another_file.py')
self.file2.setCompleter(self.completer)
self.fout = QLineEdit()
self.fout.setText(''.join((path.join(gettempdir(),
datetime.now().strftime('%d-%b-%Y_%H:%M:%S.diff')))))
self.fout.setPlaceholderText('/full/path/to/output_file.diff')
self.fout.setCompleter(self.completer)
self.regex = QLineEdit()
self.regex.setPlaceholderText('DONT use unless you know what are doing')
self.regex.setToolTip('Do NOT use unless you know what you are doing !')
self.borig = QPushButton(QIcon.fromTheme("folder-open"), 'Open')
self.borig.clicked.connect(lambda: self.file1.setText(str(
QFileDialog.getOpenFileName(self.dialog, 'Open file to compare',
path.expanduser("~"), ';;(*.*)'))))
self.bmodi = QPushButton(QIcon.fromTheme("folder-open"), 'Open')
self.bmodi.clicked.connect(lambda: self.file2.setText(str(
QFileDialog.getOpenFileName(self.dialog, 'Open file to compare',
path.expanduser("~"), ';;(*.*)'))))
self.bout = QPushButton(QIcon.fromTheme("folder-open"), 'Open')
self.bout.clicked.connect(lambda: self.fout.setText(str(
QFileDialog.getSaveFileName(self.dialog, 'Save a Diff file',
path.expanduser("~"), ';;(*.diff)'))))
vboxg1 = QVBoxLayout(self.group1)
for each_widget in (QLabel('Original file full path'),
self.file1, self.borig,
QLabel('Modified file full path'),
self.file2, self.bmodi,
QLabel('Output file full Path'),
self.fout, self.bout,
QLabel('Diff Output Format'), self.frmt,
QLabel('Diff REGEX to Ignore (ADVANCED)'),
self.regex):
vboxg1.addWidget(each_widget)
self.group2 = QGroupBox()
self.group2.setTitle('Options')
self.nwfl = QCheckBox('Treat new files as Empty')
self.smll = QCheckBox('Look for smaller changes')
self.lrgf = QCheckBox('Optimize for large files')
self.case = QCheckBox('Ignore case changes on content')
self.cnvt = QCheckBox('Convert Tabs to Spaces')
self.blnk = QCheckBox('Ignore added or removed Blank lines')
self.spac = QCheckBox('Ignore changes in amount of Spaces')
self.whit = QCheckBox('Ignore ALL white Spaces')
self.tabz = QCheckBox('Ignore changes by Tab expansions')
self.sprs = QCheckBox('Remove Space or Tab before empty lines')
self.filn = QCheckBox('Ignore case when comparing file names')
self.tbs = QComboBox(self.group2)
self.tbs.addItems(['4', '6', '8', '10', '2'])
self.nice = QComboBox(self.group2)
self.nice.addItems(['20', '15', '10', '5', '0'])
vboxg2 = QVBoxLayout(self.group2)
for each_widget in (self.nwfl, self.smll, self.lrgf, self.case,
self.cnvt, self.blnk, self.spac, self.whit,
self.tabz, self.sprs, self.filn,
QLabel('Diff Tabs-to-Spaces Size'), self.tbs,
QLabel('Diff Backend CPU Priority'), self.nice):
vboxg2.addWidget(each_widget)
try:
each_widget.setToolTip(each_widget.text())
except:
each_widget.setToolTip(each_widget.currentText())
each_widget.setCursor(QCursor(Qt.PointingHandCursor))
group3 = QGroupBox()
group3.setTitle('Even More Options')
self.plai = QCheckBox('Force treat all files as plain text')
self.nocr = QCheckBox('Force strip trailing carriage return')
self.ridt = QCheckBox('Report when two files are identical')
self.nocm = QCheckBox('Do not output common lines')
self.rdif = QCheckBox('Report only when files differ')
self.clip = QCheckBox('Copy Diff to Clipboard when done')
self.noti = QCheckBox('Use system Notification when done')
self.pret = QCheckBox('Align all Tabs by prepending a Tab')
self.lolz = QCheckBox('Output Diff in two equal columns')
self.odif = QCheckBox('Open Diff with Ninja-IDE when done')
self.plac = QCheckBox('Make an Awesome Diff view when done')
self.wdth = QComboBox(group3)
self.wdth.addItems(['80', '100', '120', '130', '250', '500', '999999'])
self.bcknd = QComboBox(group3)
self.bcknd.addItems(['diff', 'diff.py'])
self.bcknd.setDisabled(True) #TODO this feature needs work
vboxg3 = QVBoxLayout(group3)
for each_widget in (self.plai, self.nocr, self.ridt, self.nocm,
self.rdif, self.pret, self.clip, self.noti,
self.lolz, self.odif, self.plac,
QLabel('Diff Maximum Total Width'), self.wdth,
QLabel('Diff Backend (EXPERIMENTAL)'), self.bcknd):
vboxg3.addWidget(each_widget)
try:
each_widget.setToolTip(each_widget.text())
except:
each_widget.setToolTip(each_widget.currentText())
each_widget.setCursor(QCursor(Qt.PointingHandCursor))
for widget_should_be_checked in (self.nwfl, self.smll, self.lrgf,
self.clip, self.cnvt, self.plai, self.noti):
widget_should_be_checked.setChecked(True)
container = QWidget()
hbox = QHBoxLayout(container)
for each_widget in (self.group2, self.group1, group3):
hbox.addWidget(each_widget)
buttons = QDialogButtonBox()
buttons.resize(self.dialog.size().width(), buttons.size().height() * 2)
buttons.setOrientation(Qt.Horizontal)
buttons.setStandardButtons(
QDialogButtonBox.Ok |
QDialogButtonBox.Cancel |
QDialogButtonBox.Close |
QDialogButtonBox.Help)
buttons.setCenterButtons(False)
buttons.helpRequested.connect(lambda: QMessageBox.about(
self.dialog, __doc__,
''.join((__doc__, ' GUI and Visualizer Plugin,', linesep,
'version ', __version__, ', (', __license__, '), by ', linesep,
__author__, ', ( ', __email__, ' ).', linesep))))
buttons.rejected.connect(self.dialog.close)
buttons.accepted.connect(self.make_diff)
info = QLabel(''.join(('<b> Current Backend Diff Engine: </b>',
getoutput('diff --version').split(linesep)[0])))
vbox = QVBoxLayout(self.dialog)
for each_widget in (
QLabel('<center><h2> Ninja IDE Diff and Patch </h2></center>'),
container, info, buttons):
vbox.addWidget(each_widget)
self.dialog.resize(1024, self.dialog.size().height())
self.dialog.exec_()
def viewDatasetAction(self):
#print "viewDatasetAction"
model = self.model
table_name = str(model.fileName(self.currentIndex))
table_name_full = str(model.filePath(self.currentIndex))
parentIndex = model.parent(self.currentIndex)
parent_name = str(model.fileName(parentIndex))
parent_name_full = str(model.filePath(parentIndex))
storage = StorageFactory().get_storage(
'flt_storage', storage_location=parent_name_full)
columns = storage.get_column_names(table_name)
# temporarily use the table name for the dataset name
# dataset_name = DatasetFactory().dataset_name_for_table(table_name)
# Aaron - please check this way of getting the XMLConfiguration -- is this the best way?
# general = self.mainwindow.toolboxBase.opus_core_xml_configuration.get_section('general')
# # problem: this gets the package order for the current project, but the viewer shows all the data
# package_order = general['dataset_pool_configuration'].package_order
# PREVIOUS HACK:
# package_order = ['seattle_parcel','urbansim_parcel', 'eugene', 'urbansim', 'opus_core']
# temporary code: just use a generic dataset for now
data = Dataset(in_storage=storage,
dataset_name=table_name,
in_table_name=table_name,
id_name=[])
# code to get a more specialized dataset if possible (doesn't work with table names not ending in 's'
# unless they are in the exceptions list in DatasetFactory)
# data = DatasetFactory().search_for_dataset_with_hidden_id(dataset_name, package_order,
# arguments={'in_storage': storage, 'in_table_name': table_name})
# Need to add a new tab to the main tabs for display of the data
container = QWidget()
widgetLayout = QVBoxLayout(container)
summaryGroupBox = QGroupBox(container)
summaryGroupBox.setTitle(
QString("Year: %s Run name: %s" %
(parent_name, table_name_full.split('/')[-3])))
summaryGroupBox.setFlat(True)
summaryGroupBoxLayout = QVBoxLayout(summaryGroupBox)
# Grab the summary data
buffer = StringIO()
data.summary(output=buffer, unload_after_each_attribute=True)
strng = buffer.getvalue()
buffer.close()
textBrowser = QTextBrowser()
# textBrowser.insertPlainText(strng)
textBrowser.insertHtml(self.parse_dataset_summary(strng))
summaryGroupBoxLayout.addWidget(textBrowser)
widgetLayout.addWidget(summaryGroupBox)
tableGroupBox = QGroupBox(container)
tableGroupBox.setTitle(QString("Table View"))
tableGroupBox.setFlat(True)
tableGroupBoxLayout = QVBoxLayout(tableGroupBox)
tv = QTableView()
header = columns
tabledata_tmp = []
for column in columns:
tabledata_tmp.append(data.get_attribute(column))
# Transpose the lists
tabledata = map(None, *tabledata_tmp)
# If the table data is not empty then we display it
if tabledata:
#tv.resizeColumnsToContents()
tm = TableModel(tabledata, header, container)
tv.setModel(tm)
tv.setSortingEnabled(True)
tableGroupBoxLayout.addWidget(tv)
widgetLayout.addWidget(tableGroupBox)
container.tabIcon = IconLibrary.icon('inspect')
container.tabLabel = QString(table_name)
self.manager._attach_tab(container)
class RegistrationViewWidget(FWidget):
""" Shows the home page """
def __init__(self, parent=0, *args, **kwargs):
super(RegistrationViewWidget, self).__init__(parent=parent,
*args,
**kwargs)
self.parent = parent
self.parentWidget().set_window_title("FORMULAIRE D’IMMATRICULATION")
self.title = FLabel("<h3>FORMULAIRE D’IMMATRICULATION</h3>")
self.office = Office.select().where(Office.id == 1).get()
self.created_date_field = FormatDate(QDate.currentDate())
self.created_date_field.setMaximumWidth(130)
# self.created_date_field.setInputMask('##/##/####')
self.rue_field = IntLineEdit()
self.porte_field = IntLineEdit()
self.tel_field = IntLineEdit()
self.tel_field.setInputMask('## ## ## ##')
self.tel2_field = IntLineEdit()
self.tel2_field.setInputMask('## ## ## ##')
self.bp_field = IntLineEdit()
self.email_field = LineEdit()
self.denomination_field = LineEdit()
self.commercial_name_field = LineEdit()
self.declaration_date_field = FormatDate(QDate.currentDate())
self.declaration_date_field.setMaximumWidth(130)
self.amount_capital_social_initial = FLabel()
self.amount_part_social_field = IntLineEdit()
self.apports_numeraire_field = IntLineEdit()
self.apports_numeraire_field.textChanged.connect(self.cal_total)
self.apports_nature_field = IntLineEdit()
self.apports_nature_field.textChanged.connect(self.cal_total)
self.apports_industrie_field = IntLineEdit()
self.apports_industrie_field.textChanged.connect(self.cal_total)
self.duree_statutaire_field = IntLineEdit()
self.duree_statutaire_field.setMaximumWidth(80)
self.spinneret_box = QComboBox()
self.spinneret_box.setMaximumWidth(800)
self.activites_box = QComboBox()
self.activites_box.setMaximumWidth(800)
self.activites_box.currentIndexChanged.connect(self.sp_change_select)
self.activities_list = get_activities()
for index, value in enumerate(self.activities_list):
self.activites_box.addItem(
"{}".format(self.activities_list.get(value).upper()), value)
# if self.store and self.store.name == op.name:
# self.box_store.setCurrentIndex(index)
self.formes_box = QComboBox()
self.formes_box.setMaximumWidth(800)
self.formes_list = get_formes()
for index, value in enumerate(self.formes_list):
self.formes_box.addItem(
"{}".format(self.formes_list.get(value).upper()), value)
self.commune_list = entity_children(self.office.slug_cercle).items()
self.commune_box = ExtendedComboBox()
for index, value in enumerate(self.commune_list):
self.commune_box.addItem("{}".format(value[1].upper()), value[0])
# self.commune_box.addItems(self.commune_list)
self.commune_box.setToolTip("commune")
self.commune_box.currentIndexChanged.connect(self.c_change_select)
# self.vfq_list = self.get_vfq_list()
self.vfq_box = ExtendedComboBox()
self.vfq_list = self.get_vfq_list()
for index, value in enumerate(self.vfq_list):
self.vfq_box.addItem("{}".format(self.vfq_list.get(value).upper()),
value)
self.vfq_box.setToolTip("vfq")
formbox = QFormLayout()
formbox.addRow(FLabel(DATE_DEMANTE), self.declaration_date_field)
formbox.addRow(FLabel("1. " + DENOMINATION_S_SC),
self.denomination_field)
formbox.addRow(FLabel("2. " + NOM_COMMERCIAL),
self.commercial_name_field)
formbox.addRow(FLabel("3. " + DATE_CREATION_SC),
self.created_date_field)
formbox.addRow(FLabel("4. " + ACTIVITES_E), self.activites_box)
formbox.addRow(FLabel("5. " + FILIERE), self.spinneret_box)
formbox.addRow(FLabel("6. " + FORME_SC), self.formes_box)
# Capital Social Initial
capital_formbox = QFormLayout()
capital_formbox.addRow(FLabel("7.1. " + MONTANT_PART_S),
self.amount_part_social_field)
capital_formbox.addRow(FLabel("7.2. " + MONTANT_APPORTS_NUM),
self.apports_numeraire_field)
capital_formbox.addRow(FLabel("7.3. " + MONTANT_APPORTS_NAT),
self.apports_nature_field)
capital_formbox.addRow(FLabel("7.4. " + MONTANT_APPORTS_INDU),
self.apports_industrie_field)
self.capitalSGroupBox = QGroupBox("7. " + MONTANT_CAPITAL_SI)
self.capitalSGroupBox.setLayout(capital_formbox)
self.capitalSGroupBox.setStyleSheet(CSS)
# self.capitalSGroupBox.setMaximumWidth(1300)
# Adresse du siège social
self.vline = QFrame()
self.vline.setFrameShape(QFrame.VLine)
self.vline.setFrameShadow(QFrame.Sunken)
self.addresGroupBox = QGroupBox("8. " + ADRESSE_SS)
self.addresGroupBox.setStyleSheet(CSS)
addres_gribox = QGridLayout()
addres_gribox.addWidget(FRLabel(CERCLE), 0, 0)
addres_gribox.addWidget(FLabel(self.office.cercle_name()), 0, 1)
addres_gribox.addWidget(FRLabel(COMMUNE), 1, 0)
addres_gribox.addWidget(self.commune_box, 1, 1)
# addres_gribox.addWidget(self.vline, 0, 3, 2, 5)
addres_gribox.addWidget(FRLabel(VFQ), 2, 0)
addres_gribox.addWidget(self.vfq_box, 2, 1)
addres_gribox.addWidget(FRLabel(RUE), 0, 2)
addres_gribox.addWidget(self.rue_field, 0, 3)
addres_gribox.addWidget(FRLabel(PORTE), 1, 2)
addres_gribox.addWidget(self.porte_field, 1, 3)
addres_gribox.addWidget(FRLabel(BP), 0, 4)
addres_gribox.addWidget(self.bp_field, 0, 5)
addres_gribox.addWidget(FRLabel(EMAIL), 1, 4)
addres_gribox.addWidget(self.email_field, 1, 5)
addres_gribox.addWidget(FRLabel(TEL), 2, 2)
addres_gribox.addWidget(self.tel_field, 2, 3)
addres_gribox.addWidget(FRLabel(TEL2), 2, 4)
addres_gribox.addWidget(self.tel2_field, 2, 5)
# addres_gribox.setColumnStretch(6, 5)
self.addresGroupBox.setLayout(addres_gribox)
# self.addresGroupBox.setMaximumWidth(1300)
# Durée statutaire de la société coopérative
duree_fbox = QFormLayout()
duree_fbox.addRow(FLabel("9. " + DUREE_STATUTAIRE_SC),
self.duree_statutaire_field)
butt = Button_save(SAVE)
butt.clicked.connect(self.save_and_goto_manager)
butt_and_continous = Button_save(SAVE_AND_CONTINNUES)
butt_and_continous.clicked.connect(self.save_and_goto_add_member)
butt_and_continous.setMaximumWidth(300)
duree_fbox.addRow(FLabel(""), FLabel(""))
duree_fbox.addRow(butt, butt_and_continous)
vbox = QVBoxLayout()
vbox.addLayout(formbox)
vbox.addWidget(self.capitalSGroupBox)
vbox.addWidget(self.addresGroupBox)
vbox.addLayout(duree_fbox)
self.setLayout(vbox)
def get_vfq_list(self):
# c_dic = {}
co_select = self.commune_box.itemData(self.commune_box.currentIndex())
return entity_children(co_select)
def c_change_select(self):
self.vfq_box.clear()
self.vfq_list = self.get_vfq_list()
for index, value in enumerate(self.vfq_list):
self.vfq_box.addItem("{}".format(self.vfq_list.get(value).upper()),
value)
def get_spinneret_list(self):
# c_dic = {}
r_select = self.activites_box.itemData(
self.activites_box.currentIndex())
return get_spinneret_activites(r_select)
def sp_change_select(self):
self.spinneret_box.clear()
self.spinneret_list = self.get_spinneret_list()
for index, value in enumerate(self.spinneret_list):
self.spinneret_box.addItem(
"{}".format(self.spinneret_list.get(value).upper()), value)
def is_valide(self):
if check_is_empty(self.denomination_field):
return False
if CooperativeCompanie.select().where(
CooperativeCompanie.denomination ==
self.denomination_field.text()).exists():
field_error(
self.denomination_field,
"Cette dénomination existe déjà dans la base de données !")
return False
if check_is_empty(self.commercial_name_field):
return False
if check_is_empty(self.created_date_field):
return False
if check_is_empty(self.denomination_field):
return False
if check_is_empty(self.apports_numeraire_field):
return False
if check_is_empty(self.apports_nature_field):
return False
if check_is_empty(self.apports_industrie_field):
return False
# if check_is_empty(self.rue_field):
# return False
# if check_is_empty(self.porte_field):
# return False
# print(len(self.tel_field.text()))
if len(self.tel_field.text()) != 11:
field_error(self.tel_field, "Numéro requis")
return False
# if check_is_empty(self.bp_field):
# return False
# if check_is_empty(self.email_field):
# return False
if check_is_empty(self.duree_statutaire_field):
return False
# print(int(self.duree_statutaire_field.text()))
if int(self.duree_statutaire_field.text()) > 99:
field_error(
self.duree_statutaire_field,
"La durée statutaire ne peut être supérieure à 99 ans")
return False
return True
def save(self):
if not self.is_valide():
return
self.scoop = CooperativeCompanie()
self.scoop.office = self.office
self.scoop.created_date = str(self.created_date_field.text())
self.scoop.denomination = str(self.denomination_field.text())
self.scoop.commercial_name = str(self.commercial_name_field.text())
self.scoop.activity = self.activites_box.itemData(
self.activites_box.currentIndex())
self.scoop.spinneret = self.spinneret_box.itemData(
self.spinneret_box.currentIndex())
self.scoop.forme = self.formes_box.itemData(
self.formes_box.currentIndex())
self.scoop.amount_part_social = is_int(
self.amount_part_social_field.text())
self.scoop.apports_numeraire = is_int(
self.apports_numeraire_field.text())
self.scoop.apports_nature = is_int(self.apports_nature_field.text())
self.scoop.apports_industrie = is_int(
self.apports_industrie_field.text())
self.scoop.region = self.office.slug_region
self.scoop.cercle = self.office.slug_cercle
self.scoop.commune = self.commune_box.itemData(
self.commune_box.currentIndex())
self.scoop.vfq = self.vfq_box.itemData(self.vfq_box.currentIndex())
self.scoop.rue = is_int(self.rue_field.text())
self.scoop.porte = is_int(self.porte_field.text())
self.scoop.tel = is_int(self.tel_field.text())
self.scoop.tel2 = is_int(self.tel2_field.text())
self.scoop.bp = is_int(self.bp_field.text())
self.scoop.email = self.email_field.text()
self.scoop.duree_statutaire = is_int(
self.duree_statutaire_field.text())
self.scoop.save_()
check_list = CheckList()
check_list.save_()
self.dmd = Demande()
self.dmd.check_list = check_list
self.dmd.declaration_date = str(self.declaration_date_field.text())
self.dmd.scoop = self.scoop
self.dmd.status = self.dmd.ADDMEMBER
self.dmd.save_()
return True
def save_and_goto_add_member(self):
if self.save():
from ui.member_manager import MemberManagerWidget
self.parent.change_context(MemberManagerWidget, dmd=self.dmd)
def save_and_goto_manager(self):
if self.save():
self.parent.change_context(ResgistrationManagerWidget)
def cal_total(self):
total = is_int(self.apports_numeraire_field.text() or 0) + is_int(
self.apports_nature_field.text() or 0) + is_int(
self.apports_industrie_field.text() or 0)
self.capitalSGroupBox.setTitle("7. {} : {}".format(
MONTANT_CAPITAL_SI, device_amount(total)))
def __createLayout(self):
""" Creates the dialog layout """
self.resize(600, 300)
self.setSizeGripEnabled(True)
verticalLayout = QVBoxLayout(self)
gridLayout = QGridLayout()
# Combo box for the text to search
findLabel = QLabel(self)
findLabel.setText("Find text:")
self.findCombo = QComboBox(self)
self.__tuneCombo(self.findCombo)
self.findCombo.lineEdit().setToolTip(
"Regular expression to search for")
self.findCombo.editTextChanged.connect(self.__someTextChanged)
gridLayout.addWidget(findLabel, 0, 0, 1, 1)
gridLayout.addWidget(self.findCombo, 0, 1, 1, 1)
verticalLayout.addLayout(gridLayout)
# Check boxes
horizontalCBLayout = QHBoxLayout()
self.caseCheckBox = QCheckBox(self)
self.caseCheckBox.setText("Match &case")
horizontalCBLayout.addWidget(self.caseCheckBox)
self.wordCheckBox = QCheckBox(self)
self.wordCheckBox.setText("Match whole &word")
horizontalCBLayout.addWidget(self.wordCheckBox)
self.regexpCheckBox = QCheckBox(self)
self.regexpCheckBox.setText("Regular &expression")
horizontalCBLayout.addWidget(self.regexpCheckBox)
verticalLayout.addLayout(horizontalCBLayout)
# Files groupbox
filesGroupbox = QGroupBox(self)
filesGroupbox.setTitle("Find in")
sizePolicy = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
filesGroupbox.sizePolicy().hasHeightForWidth())
filesGroupbox.setSizePolicy(sizePolicy)
gridLayoutFG = QGridLayout(filesGroupbox)
self.projectRButton = QRadioButton(filesGroupbox)
self.projectRButton.setText("&Project")
gridLayoutFG.addWidget(self.projectRButton, 0, 0)
self.projectRButton.clicked.connect(self.__projectClicked)
self.openFilesRButton = QRadioButton(filesGroupbox)
self.openFilesRButton.setText("&Opened files only")
gridLayoutFG.addWidget(self.openFilesRButton, 1, 0)
self.openFilesRButton.clicked.connect(self.__openFilesOnlyClicked)
self.dirRButton = QRadioButton(filesGroupbox)
self.dirRButton.setText("&Directory tree")
gridLayoutFG.addWidget(self.dirRButton, 2, 0)
self.dirRButton.clicked.connect(self.__dirClicked)
self.dirEditCombo = QComboBox(filesGroupbox)
self.__tuneCombo(self.dirEditCombo)
self.dirEditCombo.lineEdit().setToolTip("Directory to search in")
gridLayoutFG.addWidget(self.dirEditCombo, 2, 1)
self.dirEditCombo.editTextChanged.connect(self.__someTextChanged)
self.dirSelectButton = QPushButton(filesGroupbox)
self.dirSelectButton.setText("...")
gridLayoutFG.addWidget(self.dirSelectButton, 2, 2)
self.dirSelectButton.clicked.connect(self.__selectDirClicked)
filterLabel = QLabel(filesGroupbox)
filterLabel.setText("Files filter:")
gridLayoutFG.addWidget(filterLabel, 3, 0)
self.filterCombo = QComboBox(filesGroupbox)
self.__tuneCombo(self.filterCombo)
self.filterCombo.lineEdit().setToolTip("File names regular expression")
gridLayoutFG.addWidget(self.filterCombo, 3, 1)
self.filterCombo.editTextChanged.connect(self.__someTextChanged)
verticalLayout.addWidget(filesGroupbox)
# File label
self.fileLabel = FitPathLabel(self)
self.fileLabel.setSizePolicy(QSizePolicy.Ignored, QSizePolicy.Fixed)
verticalLayout.addWidget(self.fileLabel)
# Progress bar
self.progressBar = QProgressBar(self)
self.progressBar.setValue(0)
self.progressBar.setOrientation(Qt.Horizontal)
verticalLayout.addWidget(self.progressBar)
# Buttons at the bottom
buttonBox = QDialogButtonBox(self)
buttonBox.setOrientation(Qt.Horizontal)
buttonBox.setStandardButtons(QDialogButtonBox.Cancel)
self.findButton = buttonBox.addButton("Find",
QDialogButtonBox.AcceptRole)
self.findButton.setDefault(True)
self.findButton.clicked.connect(self.__process)
verticalLayout.addWidget(buttonBox)
buttonBox.rejected.connect(self.__onClose)
return
class CalcDlg(QDialog):
def __init__(self, parent, point3d, startBearing, flagStr):
QDialog.__init__(self, parent)
self.parent0 = parent
self.point = point3d
self.flagStr = flagStr
self.calcedPoint = None
self.startBearing = startBearing
# self.flagStrName = flagStr
# self.resize(326, 310)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setSpacing(6)
self.verticalLayout.setMargin(3)
self.verticalLayout.setObjectName(("verticalLayout"))
self.groupBox = QGroupBox(self)
self.groupBox.setTitle((""))
self.groupBox.setObjectName(("groupBox"))
self.verticalLayout_2 = QVBoxLayout(self.groupBox)
self.verticalLayout_2.setSpacing(0)
self.verticalLayout_2.setMargin(3)
self.verticalLayout_2.setObjectName(("verticalLayout_2"))
self.groupBox_5 = QGroupBox(self.groupBox)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Maximum)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.groupBox_5.sizePolicy().hasHeightForWidth())
self.groupBox_5.setSizePolicy(sizePolicy)
font = QFont()
font.setFamily(("Arial"))
self.groupBox_5.setFont(font)
self.groupBox_5.setObjectName(("groupBox_5"))
self.horizontalLayout_19 = QHBoxLayout(self.groupBox_5)
self.horizontalLayout_19.setSpacing(0)
self.horizontalLayout_19.setMargin(0)
self.horizontalLayout_19.setObjectName(("horizontalLayout_19"))
self.groupBox_5.setVisible(False)
self.frame_18 = QFrame(self.groupBox_5)
self.frame_18.setFrameShape(QFrame.StyledPanel)
self.frame_18.setFrameShadow(QFrame.Raised)
self.frame_18.setObjectName(("frame_18"))
self.verticalLayout_13 = QVBoxLayout(self.frame_18)
self.verticalLayout_13.setSpacing(0)
self.verticalLayout_13.setContentsMargins(-1, -1, 0, -1)
self.verticalLayout_13.setObjectName(("verticalLayout_13"))
self.frame_19 = QFrame(self.frame_18)
sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.frame_19.sizePolicy().hasHeightForWidth())
self.frame_19.setSizePolicy(sizePolicy)
self.frame_19.setFrameShape(QFrame.StyledPanel)
self.frame_19.setFrameShadow(QFrame.Raised)
self.frame_19.setObjectName(("frame_19"))
self.horizontalLayout_20 = QHBoxLayout(self.frame_19)
self.horizontalLayout_20.setSpacing(0)
self.horizontalLayout_20.setMargin(0)
self.horizontalLayout_20.setObjectName(("horizontalLayout_20"))
self.label_9 = QLabel(self.frame_19)
self.label_9.setMaximumSize(QSize(60, 16777215))
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.label_9.setFont(font)
self.label_9.setObjectName(("label_9"))
self.horizontalLayout_20.addWidget(self.label_9)
self.txtTHR_X = QLineEdit(self.frame_19)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.txtTHR_X.sizePolicy().hasHeightForWidth())
self.txtTHR_X.setSizePolicy(sizePolicy)
self.txtTHR_X.setMaximumSize(QSize(16777215, 16777215))
font = QFont()
font.setFamily(("Arial"))
self.txtTHR_X.setFont(font)
self.txtTHR_X.setObjectName(("txtTHR_X"))
self.horizontalLayout_20.addWidget(self.txtTHR_X)
self.verticalLayout_13.addWidget(self.frame_19)
self.frame_20 = QFrame(self.frame_18)
sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.frame_20.sizePolicy().hasHeightForWidth())
self.frame_20.setSizePolicy(sizePolicy)
self.frame_20.setFrameShape(QFrame.StyledPanel)
self.frame_20.setFrameShadow(QFrame.Raised)
self.frame_20.setObjectName(("frame_20"))
self.horizontalLayout_21 = QHBoxLayout(self.frame_20)
self.horizontalLayout_21.setSpacing(0)
self.horizontalLayout_21.setMargin(0)
self.horizontalLayout_21.setObjectName(("horizontalLayout_21"))
self.label_10 = QLabel(self.frame_20)
self.label_10.setMaximumSize(QSize(60, 16777215))
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.label_10.setFont(font)
self.label_10.setObjectName(("label_10"))
self.horizontalLayout_21.addWidget(self.label_10)
self.txtTHR_Y = QLineEdit(self.frame_20)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.txtTHR_Y.sizePolicy().hasHeightForWidth())
self.txtTHR_Y.setSizePolicy(sizePolicy)
self.txtTHR_Y.setMaximumSize(QSize(16777215, 16777215))
font = QFont()
font.setFamily(("Arial"))
self.txtTHR_Y.setFont(font)
self.txtTHR_Y.setObjectName(("txtTHR_Y"))
self.horizontalLayout_21.addWidget(self.txtTHR_Y)
self.verticalLayout_13.addWidget(self.frame_20)
self.horizontalLayout_19.addWidget(self.frame_18)
self.frame_21 = QFrame(self.groupBox_5)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.frame_21.sizePolicy().hasHeightForWidth())
self.frame_21.setSizePolicy(sizePolicy)
self.frame_21.setMaximumSize(QSize(30, 70))
self.frame_21.setFrameShape(QFrame.StyledPanel)
self.frame_21.setFrameShadow(QFrame.Raised)
self.frame_21.setObjectName(("frame_21"))
self.verticalLayout_14 = QVBoxLayout(self.frame_21)
self.verticalLayout_14.setSpacing(0)
self.verticalLayout_14.setMargin(0)
self.verticalLayout_14.setObjectName(("verticalLayout_14"))
self.btnCaptureRunwayTHR = QToolButton(self.frame_21)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.btnCaptureRunwayTHR.sizePolicy().hasHeightForWidth())
self.btnCaptureRunwayTHR.setSizePolicy(sizePolicy)
self.btnCaptureRunwayTHR.setMaximumSize(QSize(16777215, 47))
icon = QIcon()
icon.addPixmap(QPixmap(("Resource/coordinate_capture.png")),
QIcon.Normal, QIcon.Off)
self.btnCaptureRunwayTHR.setIcon(icon)
self.btnCaptureRunwayTHR.setObjectName(("btnCaptureRunwayTHR"))
self.verticalLayout_14.addWidget(self.btnCaptureRunwayTHR)
# self.btnToolTHR = QToolButton(self.frame_21)
# sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed)
# sizePolicy.setHorizontalStretch(0)
# sizePolicy.setVerticalStretch(0)
# sizePolicy.setHeightForWidth(self.btnToolTHR.sizePolicy().hasHeightForWidth())
# self.btnToolTHR.setSizePolicy(sizePolicy)
# self.btnToolTHR.setMaximumSize(QSize(16777215, 20))
# icon1 = QIcon()
# icon1.addPixmap(QPixmap(("Resource/sort2.png")), QIcon.Normal, QIcon.Off)
# self.btnToolTHR.setIcon(icon1)
# self.btnToolTHR.setObjectName(("btnToolTHR"))
# self.verticalLayout_14.addWidget(self.btnToolTHR)
self.horizontalLayout_19.addWidget(self.frame_21)
self.verticalLayout_2.addWidget(self.groupBox_5)
self.groupBox_4 = QGroupBox(self.groupBox)
self.groupBox_4.setVisible(False)
# self.groupBox.setVisible(False)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Maximum)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.groupBox_4.sizePolicy().hasHeightForWidth())
self.groupBox_4.setSizePolicy(sizePolicy)
font = QFont()
font.setFamily(("Arial"))
self.groupBox_4.setFont(font)
self.groupBox_4.setObjectName(("groupBox_4"))
self.horizontalLayout_16 = QHBoxLayout(self.groupBox_4)
self.horizontalLayout_16.setSpacing(0)
self.horizontalLayout_16.setMargin(0)
self.horizontalLayout_16.setObjectName(("horizontalLayout_16"))
self.frame_14 = QFrame(self.groupBox_4)
self.frame_14.setFrameShape(QFrame.StyledPanel)
self.frame_14.setFrameShadow(QFrame.Raised)
self.frame_14.setObjectName(("frame_14"))
self.verticalLayout_11 = QVBoxLayout(self.frame_14)
self.verticalLayout_11.setSpacing(0)
self.verticalLayout_11.setContentsMargins(-1, -1, 0, -1)
self.verticalLayout_11.setObjectName(("verticalLayout_11"))
self.frame_15 = QFrame(self.frame_14)
sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.frame_15.sizePolicy().hasHeightForWidth())
self.frame_15.setSizePolicy(sizePolicy)
self.frame_15.setFrameShape(QFrame.StyledPanel)
self.frame_15.setFrameShadow(QFrame.Raised)
self.frame_15.setObjectName(("frame_15"))
self.horizontalLayout_17 = QHBoxLayout(self.frame_15)
self.horizontalLayout_17.setSpacing(0)
self.horizontalLayout_17.setMargin(0)
self.horizontalLayout_17.setObjectName(("horizontalLayout_17"))
self.label_7 = QLabel(self.frame_15)
self.label_7.setMaximumSize(QSize(60, 16777215))
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.label_7.setFont(font)
self.label_7.setObjectName(("label_7"))
self.horizontalLayout_17.addWidget(self.label_7)
self.txtEND_X = QLineEdit(self.frame_15)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.txtEND_X.sizePolicy().hasHeightForWidth())
self.txtEND_X.setSizePolicy(sizePolicy)
self.txtEND_X.setMaximumSize(QSize(16777215, 16777215))
font = QFont()
font.setFamily(("Arial"))
self.txtEND_X.setFont(font)
self.txtEND_X.setObjectName(("txtEND_X"))
self.horizontalLayout_17.addWidget(self.txtEND_X)
self.verticalLayout_11.addWidget(self.frame_15)
self.frame_16 = QFrame(self.frame_14)
sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.frame_16.sizePolicy().hasHeightForWidth())
self.frame_16.setSizePolicy(sizePolicy)
self.frame_16.setFrameShape(QFrame.StyledPanel)
self.frame_16.setFrameShadow(QFrame.Raised)
self.frame_16.setObjectName(("frame_16"))
self.horizontalLayout_18 = QHBoxLayout(self.frame_16)
self.horizontalLayout_18.setSpacing(0)
self.horizontalLayout_18.setMargin(0)
self.horizontalLayout_18.setObjectName(("horizontalLayout_18"))
self.label_8 = QLabel(self.frame_16)
self.label_8.setMaximumSize(QSize(60, 16777215))
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.label_8.setFont(font)
self.label_8.setObjectName(("label_8"))
self.horizontalLayout_18.addWidget(self.label_8)
self.txtEND_Y = QLineEdit(self.frame_16)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.txtEND_Y.sizePolicy().hasHeightForWidth())
self.txtEND_Y.setSizePolicy(sizePolicy)
self.txtEND_Y.setMaximumSize(QSize(16777215, 16777215))
font = QFont()
font.setFamily(("Arial"))
self.txtEND_Y.setFont(font)
self.txtEND_Y.setObjectName(("txtEND_Y"))
self.horizontalLayout_18.addWidget(self.txtEND_Y)
self.verticalLayout_11.addWidget(self.frame_16)
self.horizontalLayout_16.addWidget(self.frame_14)
self.frame_17 = QFrame(self.groupBox_4)
self.frame_17.setMaximumSize(QSize(30, 16777215))
self.frame_17.setFrameShape(QFrame.StyledPanel)
self.frame_17.setFrameShadow(QFrame.Raised)
self.frame_17.setObjectName(("frame_17"))
self.verticalLayout_12 = QVBoxLayout(self.frame_17)
self.verticalLayout_12.setSpacing(0)
self.verticalLayout_12.setMargin(0)
self.verticalLayout_12.setObjectName(("verticalLayout_12"))
self.btnCaptureRunwayEND = QToolButton(self.frame_17)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.btnCaptureRunwayEND.sizePolicy().hasHeightForWidth())
self.btnCaptureRunwayEND.setSizePolicy(sizePolicy)
self.btnCaptureRunwayEND.setMaximumSize(QSize(16777215, 47))
self.btnCaptureRunwayEND.setIcon(icon)
self.btnCaptureRunwayEND.setObjectName(("btnCaptureRunwayEND"))
self.verticalLayout_12.addWidget(self.btnCaptureRunwayEND)
# self.btnToolEND = QToolButton(self.frame_17)
# sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed)
# sizePolicy.setHorizontalStretch(0)
# sizePolicy.setVerticalStretch(0)
# sizePolicy.setHeightForWidth(self.btnToolEND.sizePolicy().hasHeightForWidth())
# self.btnToolEND.setSizePolicy(sizePolicy)
# self.btnToolEND.setMaximumSize(QSize(16777215, 20))
# self.btnToolEND.setIcon(icon1)
# self.btnToolEND.setObjectName(("btnToolEND"))
# self.verticalLayout_12.addWidget(self.btnToolEND)
self.horizontalLayout_16.addWidget(self.frame_17)
self.verticalLayout_2.addWidget(self.groupBox_4)
self.lbl1 = QLabel(self.groupBox)
font = QFont()
font.setFamily(("Arial"))
self.lbl1.setFont(font)
self.lbl1.setText((""))
self.lbl1.setAlignment(Qt.AlignCenter)
self.lbl1.setWordWrap(False)
self.lbl1.setMargin(0)
self.lbl1.setObjectName(("lbl1"))
self.verticalLayout_2.addWidget(self.lbl1)
self.lbl2 = QLabel(self.groupBox)
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.lbl2.setFont(font)
self.lbl2.setText((""))
self.lbl2.setAlignment(Qt.AlignCenter)
self.lbl2.setObjectName(("lbl2"))
self.verticalLayout_2.addWidget(self.lbl2)
self.frame_22 = QFrame(self.groupBox)
sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.frame_22.sizePolicy().hasHeightForWidth())
self.frame_22.setSizePolicy(sizePolicy)
self.frame_22.setFrameShape(QFrame.StyledPanel)
self.frame_22.setFrameShadow(QFrame.Raised)
self.frame_22.setObjectName(("frame_22"))
self.horizontalLayout_22 = QHBoxLayout(self.frame_22)
self.horizontalLayout_22.setSpacing(0)
self.horizontalLayout_22.setMargin(0)
self.horizontalLayout_22.setObjectName(("horizontalLayout_22"))
self.label_11 = QLabel(self.frame_22)
self.label_11.setMinimumSize(QSize(170, 0))
self.label_11.setMaximumSize(QSize(180, 16777215))
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.label_11.setFont(font)
self.label_11.setObjectName(("label_11"))
self.horizontalLayout_22.addWidget(self.label_11)
self.txtForm = QLineEdit(self.frame_22)
self.txtForm.setEnabled(False)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.txtForm.sizePolicy().hasHeightForWidth())
self.txtForm.setSizePolicy(sizePolicy)
self.txtForm.setMaximumSize(QSize(16777215, 16777215))
font = QFont()
font.setFamily(("Arial"))
self.txtForm.setFont(font)
self.txtForm.setObjectName(("txtForm"))
self.horizontalLayout_22.addWidget(self.txtForm)
self.verticalLayout_2.addWidget(self.frame_22)
self.frame_23 = QFrame(self.groupBox)
sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.frame_23.sizePolicy().hasHeightForWidth())
self.frame_23.setSizePolicy(sizePolicy)
self.frame_23.setFrameShape(QFrame.StyledPanel)
self.frame_23.setFrameShadow(QFrame.Raised)
self.frame_23.setObjectName(("frame_23"))
self.horizontalLayout_23 = QHBoxLayout(self.frame_23)
self.horizontalLayout_23.setSpacing(0)
self.horizontalLayout_23.setMargin(0)
self.horizontalLayout_23.setObjectName(("horizontalLayout_23"))
self.label_12 = QLabel(self.frame_23)
self.label_12.setMinimumSize(QSize(170, 0))
self.label_12.setMaximumSize(QSize(180, 16777215))
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.label_12.setFont(font)
self.label_12.setObjectName(("label_12"))
self.horizontalLayout_23.addWidget(self.label_12)
self.txtBearing = QLineEdit(self.frame_23)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.txtBearing.sizePolicy().hasHeightForWidth())
self.txtBearing.setSizePolicy(sizePolicy)
self.txtBearing.setMaximumSize(QSize(16777215, 16777215))
font = QFont()
font.setFamily(("Arial"))
self.txtBearing.setFont(font)
self.txtBearing.setObjectName(("txtBearing"))
self.horizontalLayout_23.addWidget(self.txtBearing)
self.btnCaptureBearing = QToolButton(self.frame_23)
sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.btnCaptureBearing.sizePolicy().hasHeightForWidth())
self.btnCaptureBearing.setSizePolicy(sizePolicy)
self.btnCaptureBearing.setMaximumSize(QSize(16777215, 25))
self.btnCaptureBearing.setStyleSheet((""))
self.btnCaptureBearing.setIcon(icon)
self.btnCaptureBearing.setObjectName(("btnCaptureBearing"))
self.horizontalLayout_23.addWidget(self.btnCaptureBearing)
self.verticalLayout_2.addWidget(self.frame_23)
self.frame_24 = QFrame(self.groupBox)
sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.frame_24.sizePolicy().hasHeightForWidth())
self.frame_24.setSizePolicy(sizePolicy)
self.frame_24.setFrameShape(QFrame.StyledPanel)
self.frame_24.setFrameShadow(QFrame.Raised)
self.frame_24.setObjectName(("frame_24"))
self.horizontalLayout_24 = QHBoxLayout(self.frame_24)
self.horizontalLayout_24.setSpacing(0)
self.horizontalLayout_24.setMargin(0)
self.horizontalLayout_24.setObjectName(("horizontalLayout_24"))
self.lblDistance = QLabel(self.frame_24)
self.lblDistance.setMinimumSize(QSize(170, 0))
self.lblDistance.setMaximumSize(QSize(180, 16777215))
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.lblDistance.setFont(font)
self.lblDistance.setObjectName(("lblDistance"))
self.horizontalLayout_24.addWidget(self.lblDistance)
self.txtDistance = QLineEdit(self.frame_24)
self.txtDistance.setEnabled(False)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.txtDistance.sizePolicy().hasHeightForWidth())
self.txtDistance.setSizePolicy(sizePolicy)
self.txtDistance.setMaximumSize(QSize(16777215, 16777215))
font = QFont()
font.setFamily(("Arial"))
self.txtDistance.setFont(font)
self.txtDistance.setObjectName(("txtDistance"))
self.horizontalLayout_24.addWidget(self.txtDistance)
self.btnCaptureDistance = QToolButton(self.frame_24)
sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.btnCaptureDistance.sizePolicy().hasHeightForWidth())
self.btnCaptureDistance.setSizePolicy(sizePolicy)
self.btnCaptureDistance.setMaximumSize(QSize(16777215, 23))
self.btnCaptureDistance.setStyleSheet((""))
self.btnCaptureDistance.setIcon(icon)
self.btnCaptureDistance.setObjectName(("btnCaptureDistance"))
self.horizontalLayout_24.addWidget(self.btnCaptureDistance)
self.verticalLayout_2.addWidget(self.frame_24)
self.verticalLayout.addWidget(self.groupBox)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel
| QDialogButtonBox.Ok)
self.buttonBox.setObjectName(("buttonBox"))
self.verticalLayout.addWidget(self.buttonBox)
self.btnCaptureDistance.clicked.connect(self.method_9)
self.btnCaptureBearing.clicked.connect(self.method_8)
self.txtEND_X.textChanged.connect(self.method_4)
self.txtEND_Y.textChanged.connect(self.method_4)
self.txtTHR_X.textChanged.connect(self.method_4)
self.txtTHR_Y.textChanged.connect(self.method_4)
# self.type = rnavType
# self.category = category
# self.resultPosionList = position_List
self.MinBearing2 = 0
self.MaxBearing2 = 0
self.waypoint = None
self.distanceMeasureTool = MeasureTool(define._canvas,
self.txtDistance,
DistanceUnits.NM)
self.bearingTool = CaptureBearingTool(define._canvas, self.txtBearing)
self.CaptureTHRCoordTool = CaptureCoordinateTool(
define._canvas, self.txtTHR_X, self.txtTHR_Y)
self.CaptureTHRCoordTool.rubberBandClick.setColor(Qt.green)
self.CaptureENDCoordTool = CaptureCoordinateTool(
define._canvas, self.txtEND_X, self.txtEND_Y)
self.CaptureENDCoordTool.rubberBandClick.setColor(Qt.blue)
# if rnavType == RnavCommonWaypoint.FAWP or rnavType == RnavCommonWaypoint.MAWP:
# self.from1 = position_0
#
# self.resize(326, 310)
# if position_List[0] != None:
# self.setThrPosition(position_List[0].x(),position_List[0].y())
# self.CaptureTHRCoordTool.rubberBandClick.addPoint(QgsPoint(position_List[0].x(),position_List[0].y()))
# # self.CaptureTHRCoordTool.rubberBandClick.show()
# if position_List[1] != None:
# self.setEndPosition(position_List[1].x(),position_List[1].y())
# self.CaptureENDCoordTool.rubberBandClick.addPoint(QgsPoint(position_List[1].x(),position_List[1].y()))
# # self.setWaypoint(position_List[2])
# else:
# self.from1 = position_1
# num = RnavWaypoints.smethod_0(position_0, position_1)
# self.MinBearing = RnavWaypoints.smethod_7(rnavType, category, num)
# self.MaxBearing= RnavWaypoints.smethod_8(rnavType, category, num)
# self.MinDistance = RnavWaypoints.smethod_4(rnavType, category)
# if flagStr == "Y-Bar":
# if (rnavType == RnavCommonWaypoint.IAWP1):
# self.setBearing(self.MaxBearing)
# elif (rnavType != RnavCommonWaypoint.IAWP3):
# self.setBearing(num)
# else:
# self.setBearing(self.MinBearing)
# else:
# if (rnavType == RnavCommonWaypoint.IAWP1):
# self.setBearing(self.MinBearing)
# elif (rnavType != RnavCommonWaypoint.IAWP3):
# self.setBearing(num)
# else:
# self.setBearing(self.MaxBearing)
# # if self.txtDistance.isEnabled():
# # self.setDistance(RnavWaypoints.smethod_6(rnavType, category).NauticalMiles)
# # self.setWaypoint(position_List.pop(0))
# self.method_4()
self.retranslateUi()
QObject.connect(self.buttonBox, SIGNAL(("accepted()")),
self.btnCalculate_Click)
QObject.connect(self.buttonBox, SIGNAL(("rejected()")), self.reject)
# QMetaObject.connectSlotsByName(Dialog)
# self.btnToolEND.clicked.connect(self.removeEnd)
# self.btnToolTHR.clicked.connect(self.removeThr)
self.btnCaptureRunwayTHR.clicked.connect(self.captureTHR)
self.btnCaptureRunwayEND.clicked.connect(self.captureEND)
self.txtDistance.setText("10")
def retranslateUi(self):
self.setWindowTitle("CaculaterDlg")
self.groupBox_5.setTitle("Runway THR")
self.label_9.setText("X:")
self.label_10.setText("Y:")
self.btnCaptureRunwayTHR.setText("...")
# self.btnToolTHR.setText("...")
self.groupBox_4.setTitle("Runway END")
self.label_7.setText("X:")
self.label_8.setText("Y:")
self.btnCaptureRunwayEND.setText("...")
# self.btnToolEND.setText("...")
self.label_11.setText("From:")
self.txtForm.setText("FAWP")
self.label_12.setText(unicode("Bearing (°) :", "utf-8"))
# self.txtBearing.setText("188.25")
self.btnCaptureBearing.setText("...")
self.lblDistance.setText("Distance (nm):")
self.txtDistance.setText("5")
self.btnCaptureDistance.setText("...")
def captureTHR(self):
define._canvas.setMapTool(self.CaptureTHRCoordTool)
def captureEND(self):
define._canvas.setMapTool(self.CaptureENDCoordTool)
def close(self):
scene = define._canvas.scene()
scene.removeItem(self.CaptureTHRCoordTool.rubberBandClick)
scene.removeItem(self.CaptureENDCoordTool.rubberBandClick)
scene.removeItem(self.bearingTool.rubberBand)
scene.removeItem(self.distanceMeasureTool.rubberBand)
# self.CaptureTHRCoordTool.rubberBand.hide()
# self.CaptureENDCoordTool.rubberBand.hide()
define._canvas.setMapTool(QgsMapToolPan(define._canvas))
# self.reject()
def reject(self):
self.close()
QDialog.reject(self)
def getThrPoint3D(self):
if self.txtTHR_X.text() != "" and self.txtTHR_Y.text() != "":
try:
x = float(self.txtTHR_X.text())
except ValueError:
x = 0
try:
y = float(self.txtTHR_Y.text())
except ValueError:
y = 0
return Point3D(x, y, 0)
else:
return None
def getEndPoint3D(self):
if self.txtEND_X.text() != "" and self.txtEND_Y.text() != "":
try:
x = float(self.txtEND_X.text())
except ValueError:
x = 0
try:
y = float(self.txtEND_Y.text())
except ValueError:
y = 0
return Point3D(x, y, 0)
else:
return None
def setEndPosition(self, x, y):
self.txtEND_X.setText(str(x))
self.txtEND_Y.setText(str(y))
def setThrPosition(self, x, y):
self.txtTHR_X.setText(str(x))
self.txtTHR_Y.setText(str(y))
def getWaypoint(self):
if (self.type == RnavCommonWaypoint.FAWP):
nauticalMiles = float(self.txtDistance.text())
value = float(self.txtBearing.text())
num1 = math.fabs(self.rethr - value)
if (num1 > 180):
num1 = 360 - num1
num2 = math.sin(Unit.smethod_0(num1)) * 0.7559395
num3 = Unit.smethod_1(math.asin(num2 / nauticalMiles))
num4 = math.cos(Unit.smethod_0(num1)) * 0.755939525
num5 = math.cos(Unit.smethod_0(num3)) * nauticalMiles
return RnavWaypoints.smethod_3(
self.pos1400m, float(self.txtBearing.text()),
Distance(math.fabs(num5 - num4), DistanceUnits.NM))
if (self.type != RnavCommonWaypoint.MAWP):
return RnavWaypoints.smethod_3(
self.from1, float(self.txtBearing.text()),
Distance(float(self.txtDistance.text()), DistanceUnits.NM))
if (float(self.txtBearing.text()) > self.thrre
or float(self.txtBearing.text()) - self.thrre >= 90):
angle = 90
if self.flagStrName == "Y-Bar":
angle = 70
num = self.rethr - angle
if (num < 0):
num = num + 360
else:
num = self.rethr + angle
if (num > 360):
num = num - 360
point3d1 = self.from1
point3d2 = self.getThrPoint3D()
point3d = MathHelper.getIntersectionPoint(
point3d1,
RnavWaypoints.smethod_3(self.from1, float(self.txtBearing.text()),
Distance(1000)), point3d2,
RnavWaypoints.smethod_3(self.getThrPoint3D(), num, Distance(1000)))
if point3d == None:
raise UserWarning, Messages.ERR_FAILED_TO_CALCULATE_INTERSECTION_POINT
return RnavWaypoints.smethod_3(
self.getThrPoint3D(), num,
Distance(MathHelper.calcDistance(point3d2, point3d)))
def setWaypoint(self, value):
self.waypoint = value
if self.from1 != None and self.waypoint != None:
# self.setBearing(RnavWaypoints.smethod_0(self.from1, value))
# if self.txtDistance.isEnabled():
# print RnavWaypoints.smethod_2(self.from1, value).NauticalMiles
# print RnavWaypoints.smethod_2(self.from1, value).NauticalMiles
self.setDistance(
RnavWaypoints.smethod_2(self.from1, value).NauticalMiles)
def setDistance(self, value):
self.txtDistance.setText("%i" % round(value))
def setBearing(self, value):
self.txtBearing.setText(str(value))
def btnCalculate_Click(self):
try:
bearing = Unit.ConvertDegToRad(float(self.txtBearing.text()))
distance0 = Distance(float(self.txtDistance.text()),
DistanceUnits.NM).Metres
self.calcedPoint = MathHelper.distanceBearingPoint(
self.point, bearing, distance0)
if self.flagStr == "R":
self.parent0.parametersPanel.pnlIAWP1.Point3d = self.calcedPoint
self.parent0.parametersPanel.txtRadiusIAWP1.setText(
self.txtDistance.text())
elif self.flagStr == "L":
self.parent0.parametersPanel.txtRadiusIAWP3.setText(
self.txtDistance.text())
self.parent0.parametersPanel.pnlIAWP3.Point3d = self.calcedPoint
elif self.flagStr == "C":
self.parent0.parametersPanel.txtRadiusIAWP2.setText(
self.txtDistance.text())
self.parent0.parametersPanel.pnlIAWP2.Point3d = self.calcedPoint
self.accept()
except UserWarning as e:
QMessageBox.warning(self, "warning", e.message)
def method_9(self):
# self.distanceMeasureTool = MeasureTool(define._canvas, self.txtDistance, DistanceUnits.NM)
define._canvas.setMapTool(self.distanceMeasureTool)
def method_8(self):
# self.bearingTool = CaptureBearingTool(define._canvas, self.txtBearing)
define._canvas.setMapTool(self.bearingTool)
def method_4(self):
num = None
num1 = None
num2 = None
num3 = None
num4 = None
num5 = None
num6 = None
num7 = None
num8 = None
num9 = None
self.lbl1.setText(Validations.PLEASE_ENTER_VALID_RUNWAY_POSITIONS)
self.lbl2.setText(" ")
if (self.type == RnavCommonWaypoint.FAWP):
position = self.getThrPoint3D()
position1 = self.getEndPoint3D()
if position is None or position1 is None:
self.txtBearing.setText("")
# self.txtDistance.setText("")
return
self.thrre = RnavWaypoints.smethod_0(position, position1)
self.rethr = RnavWaypoints.smethod_0(position1, position)
self.pos1400m = RnavWaypoints.smethod_3(position, self.rethr,
Distance(1400))
self.MinDistance = RnavWaypoints.smethod_4(self.type,
self.category)
# if self.txtDistance.isEnabled():
# self.setDistance(RnavWaypoints.smethod_6(self.type, self.category).NauticalMiles)
self.setBearing(self.rethr)
self.MinBearing = RnavWaypoints.smethod_7(self.type, self.category,
self.rethr)
self.MaxBearing = RnavWaypoints.smethod_8(self.type, self.category,
self.rethr)
# if self.waypoint is not None:
# self.setBearing(round(RnavWaypoints.smethod_0(self.pos1400m, self.waypoint), 2))
# # if self.txtDistance.isEnabled():
# self.setDistance(RnavWaypoints.smethod_2(position, self.waypoint).NauticalMiles)
elif (self.type == RnavCommonWaypoint.MAWP):
position2 = self.getThrPoint3D()
position3 = self.getEndPoint3D()
if position2 is None or position3 is None:
self.txtBearing.setText("")
return
self.thrre = RnavWaypoints.smethod_0(position2, position3)
self.rethr = RnavWaypoints.smethod_0(position3, position2)
self.pos1400m = RnavWaypoints.smethod_3(position2, self.rethr,
Distance(1400))
num10 = RnavWaypoints.smethod_1(self.pos1400m, self.from1)
num = RnavWaypoints.smethod_1(self.from1, self.pos1400m)
num11 = 15
position4 = None
if (self.category == AircraftSpeedCategory.A
or self.category == AircraftSpeedCategory.B
or self.category == AircraftSpeedCategory.H):
num11 = 30
if (num10 > self.rethr or self.rethr - num10 >= 90):
num1 = self.thrre + num11
num2 = num
if (num2 > 360):
num2 = num2 - 360
else:
num1 = num
num2 = self.thrre - num11
if (num2 < 0):
num2 = num2 + 360
if (max(num1, num2) <= 270 or min(num1, num2) >= 90):
num3 = min(num1, num2)
num4 = max(num1, num2)
else:
num3 = max(num1, num2)
num4 = min(num1, num2)
position4 = RnavWaypoints.smethod_3(position2, self.thrre,
Distance(466))
num12 = RnavWaypoints.smethod_0(position4, self.from1)
num13 = math.fabs(num12 - self.rethr)
if (num13 > 180):
num13 = 360 - num13
if (num13 > 5):
num5 = 0
num6 = 0
num7 = 0
num8 = 0
else:
if (num12 > self.rethr or self.rethr - num12 >= 90):
num9 = self.rethr + 90
if (num9 > 360):
num9 = num9 - 360
else:
num9 = self.rethr - 90
if (num9 < 0):
num9 = num9 + 360
position5 = RnavWaypoints.smethod_3(self.pos1400m, num9,
Distance(150))
num5 = RnavWaypoints.smethod_0(self.from1, position5)
num6 = RnavWaypoints.smethod_0(self.from1, self.pos1400m)
if (max(num5, num6) <= 270 or min(num5, num6) >= 90):
num7 = min(num5, num6)
num8 = max(num5, num6)
else:
num7 = max(num5, num6)
num8 = min(num5, num6)
if (MathHelper.smethod_99(num, self.thrre, 1)):
position6 = RnavWaypoints.smethod_3(self.pos1400m,
self.rethr - 90,
Distance(150))
position7 = RnavWaypoints.smethod_3(self.pos1400m,
self.rethr + 90,
Distance(150))
num1 = RnavWaypoints.smethod_0(self.from1, position6)
num2 = RnavWaypoints.smethod_0(self.from1, position7)
num7 = 0
num8 = 0
if (max(num1, num2) <= 270 or min(num1, num2) >= 90):
num3 = min(num1, num2)
num4 = max(num1, num2)
else:
num3 = max(num1, num2)
num4 = min(num1, num2)
if (MathHelper.smethod_96(num7) or MathHelper.smethod_96(num8)):
self.MinBearing = MathHelper.smethod_3(num3)
self.MaxBearing = MathHelper.smethod_3(num4)
self.MinBearing2 = MathHelper.smethod_3(num7)
self.MaxBearing2 = MathHelper.smethod_3(num8)
elif (min(num3, num4) >= min(num7, num8)):
if (MathHelper.smethod_99(num8, num3, 0.3)):
num8 = num4
num3 = 0
num4 = 0
self.MinBearing = MathHelper.smethod_3(num7)
self.MaxBearing = MathHelper.smethod_3(num8)
self.MinBearing2 = MathHelper.smethod_3(num3)
self.MaxBearing2 = MathHelper.smethod_3(num4)
else:
if (MathHelper.smethod_99(num4, num7, 0.3)):
num4 = num8
num7 = 0
num8 = 0
self.MinBearing = MathHelper.smethod_3(num3)
self.MaxBearing = MathHelper.smethod_3(num4)
self.MinBearing2 = MathHelper.smethod_3(num7)
self.MaxBearing2 = MathHelper.smethod_3(num8)
self.MinDistance = RnavWaypoints.smethod_4(self.type,
self.category)
# if self.txtDistance.isEnabled():
# self.setDistance(RnavWaypoints.smethod_6(self.type, self.category).NauticalMiles)
if (self.MinBearing <= self.MaxBearing):
self.setBearing((self.MinBearing + self.MaxBearing) / 2)
else:
self.setBearing(
MathHelper.smethod_3(self.MinBearing +
(360 - self.MinBearing +
self.MaxBearing)))
# if (self.waypoint is not None):
# self.setBearing(RnavWaypoints.smethod_0(self.from1, self.waypoint))
if (MathHelper.smethod_96(self.MinBearing2)
or MathHelper.smethod_96(self.MaxBearing2)):
self.lbl1.setText(
unicode("Acceptable bearings are %.1f° - %.1f°", "utf-8") %
(self.MinBearing, self.MaxBearing))
else:
self.lbl1.setText(Validations.ACCEPTABLE_BEARINGS_ARE_X_Y_AND_X_Y %
(self.MinBearing, self.MaxBearing,
self.MinBearing2, self.MaxBearing2))
if self.MinDistance != None and self.type != RnavCommonWaypoint.MAWP:
self.lbl2.setText(Validations.ACCEPTABLE_MINIMUM_DISTANCE_IS_X %
(self.MinDistance.NauticalMiles))
# def removeEnd(self):
# self.txtEND_X.setText("")
# self.txtEND_Y.setText("")
# def removeThr(self):
# self.txtTHR_X.setText("")
# self.txtTHR_Y.setText("")
# @staticmethod
# def smethod_0( parent, rnavCommonWaypoint_0, aircraftSpeedCategory_0, position_0, position_1, position_List):
# flag = None
# using (DlgCalculateWaypoint dlgCalculateWaypoint = new DlgCalculateWaypoint())
# {
# dlgCalculateWaypoint.Text = string.Format("{0} {1}", Captions.CALCULATE, EnumHelper.smethod_0(rnavCommonWaypoint_0))
# dlgCalculateWaypoint.Type = rnavCommonWaypoint_0
# dlgCalculateWaypoint.Category = aircraftSpeedCategory_0
# dlgCalculateWaypoint.From = position_1
# double num = RnavWaypoints.smethod_0(position_0, position_1)
# dlgCalculateWaypoint.MinBearing = RnavWaypoints.smethod_7(rnavCommonWaypoint_0, aircraftSpeedCategory_0, num)
# dlgCalculateWaypoint.MaxBearing = RnavWaypoints.smethod_8(rnavCommonWaypoint_0, aircraftSpeedCategory_0, num)
# dlgCalculateWaypoint.MinDistance = RnavWaypoints.smethod_4(rnavCommonWaypoint_0, aircraftSpeedCategory_0)
# if (rnavCommonWaypoint_0 == RnavCommonWaypoint.IAWP1)
# {
# dlgCalculateWaypoint.Bearing = dlgCalculateWaypoint.MinBearing
# }
# else if (rnavCommonWaypoint_0 != RnavCommonWaypoint.IAWP3)
# {
# dlgCalculateWaypoint.Bearing = num
# }
# else
# {
# dlgCalculateWaypoint.Bearing = dlgCalculateWaypoint.MaxBearing
# }
# dlgCalculateWaypoint.Distance = RnavWaypoints.smethod_6(rnavCommonWaypoint_0, aircraftSpeedCategory_0)
# dlgCalculateWaypoint.Waypoint = position_2
# if (dlgCalculateWaypoint.method_2(iwin32Window_0) != System.Windows.Forms.DialogResult.OK)
# {
# flag = false
# }
# else
# {
# position_2 = dlgCalculateWaypoint.Waypoint
# flag = true
# }
# }
# return flag
# }
#
# public static bool smethod_1(IWin32Window iwin32Window_0, RnavCommonWaypoint rnavCommonWaypoint_0, AircraftSpeedCategory aircraftSpeedCategory_0, Position position_0, ref Position position_1, ref Position position_2, ref Position position_3)
# {
# bool flag
# using (DlgCalculateWaypoint dlgCalculateWaypoint = new DlgCalculateWaypoint())
# {
# dlgCalculateWaypoint.Text = string.Format("{0} {1}", Captions.CALCULATE, EnumHelper.smethod_0(rnavCommonWaypoint_0))
# dlgCalculateWaypoint.Type = rnavCommonWaypoint_0
# dlgCalculateWaypoint.Category = aircraftSpeedCategory_0
# dlgCalculateWaypoint.From = position_0
# dlgCalculateWaypoint.RwyThr = position_1
# dlgCalculateWaypoint.RwyEnd = position_2
# dlgCalculateWaypoint.Waypoint = position_3
# bool flag1 = dlgCalculateWaypoint.method_2(iwin32Window_0) == System.Windows.Forms.DialogResult.OK
# position_1 = dlgCalculateWaypoint.RwyThr
# position_2 = dlgCalculateWaypoint.RwyEnd
# if (flag1)
# {
# position_3 = dlgCalculateWaypoint.Waypoint
# }
# flag = flag1
# }
# return flag
# }
# }
def __createLayout(self, action):
""" Creates the dialog layout """
self.resize(650, 300)
self.setSizeGripEnabled(True)
# Top level layout
layout = QVBoxLayout(self)
# Cmd line arguments
argsLabel = QLabel("Command line arguments")
self.__argsEdit = QLineEdit()
self.__argsEdit.textChanged.connect(self.__argsChanged)
argsLayout = QHBoxLayout()
argsLayout.addWidget(argsLabel)
argsLayout.addWidget(self.__argsEdit)
layout.addLayout(argsLayout)
# Working directory
workDirGroupbox = QGroupBox(self)
workDirGroupbox.setTitle("Working directory")
sizePolicy = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth( \
workDirGroupbox.sizePolicy().hasHeightForWidth() )
workDirGroupbox.setSizePolicy(sizePolicy)
gridLayoutWD = QGridLayout(workDirGroupbox)
self.__scriptWDRButton = QRadioButton(workDirGroupbox)
self.__scriptWDRButton.setText("&Use script location")
gridLayoutWD.addWidget(self.__scriptWDRButton, 0, 0)
self.__scriptWDRButton.clicked.connect(self.__scriptWDirClicked)
self.__dirRButton = QRadioButton(workDirGroupbox)
self.__dirRButton.setText("Select &directory")
gridLayoutWD.addWidget(self.__dirRButton, 1, 0)
self.__dirRButton.clicked.connect(self.__dirClicked)
self.__dirEdit = QLineEdit(workDirGroupbox)
gridLayoutWD.addWidget(self.__dirEdit, 1, 1)
self.__dirEdit.textChanged.connect(self.__workingDirChanged)
self.__dirSelectButton = QPushButton(workDirGroupbox)
self.__dirSelectButton.setText("...")
gridLayoutWD.addWidget(self.__dirSelectButton, 1, 2)
self.__dirSelectButton.clicked.connect(self.__selectDirClicked)
layout.addWidget(workDirGroupbox)
# Environment
envGroupbox = QGroupBox(self)
envGroupbox.setTitle("Environment")
sizePolicy = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth( \
envGroupbox.sizePolicy().hasHeightForWidth() )
envGroupbox.setSizePolicy(sizePolicy)
layoutEnv = QVBoxLayout(envGroupbox)
self.__inheritParentRButton = QRadioButton(envGroupbox)
self.__inheritParentRButton.setText("Inherit &parent")
self.__inheritParentRButton.clicked.connect(self.__inhClicked)
layoutEnv.addWidget(self.__inheritParentRButton)
self.__inheritParentPlusRButton = QRadioButton(envGroupbox)
self.__inheritParentPlusRButton.setText(
"Inherit parent and add/&modify")
self.__inheritParentPlusRButton.clicked.connect(self.__inhPlusClicked)
layoutEnv.addWidget(self.__inheritParentPlusRButton)
hInhPlusLayout = QHBoxLayout()
self.__inhPlusEnvTable = QTreeWidget()
self.__inhPlusEnvTable.itemActivated.connect(
self.__inhPlusItemActivated)
self.__tuneTable(self.__inhPlusEnvTable)
hInhPlusLayout.addWidget(self.__inhPlusEnvTable)
vInhPlusLayout = QVBoxLayout()
self.__addInhButton = QPushButton()
self.__addInhButton.clicked.connect(self.__addInhClicked)
self.__addInhButton.setText('Add')
vInhPlusLayout.addWidget(self.__addInhButton)
self.__delInhButton = QPushButton()
self.__delInhButton.clicked.connect(self.__delInhClicked)
self.__delInhButton.setText('Delete')
vInhPlusLayout.addWidget(self.__delInhButton)
self.__editInhButton = QPushButton()
self.__editInhButton.clicked.connect(self.__editInhClicked)
self.__editInhButton.setText("Edit")
vInhPlusLayout.addWidget(self.__editInhButton)
hInhPlusLayout.addLayout(vInhPlusLayout)
layoutEnv.addLayout(hInhPlusLayout)
self.__specificRButton = QRadioButton(envGroupbox)
self.__specificRButton.setText("&Specific")
self.__specificRButton.clicked.connect(self.__specClicked)
layoutEnv.addWidget(self.__specificRButton)
hSpecLayout = QHBoxLayout()
self.__specEnvTable = QTreeWidget()
self.__specEnvTable.itemActivated.connect(self.__specItemActivated)
self.__tuneTable(self.__specEnvTable)
hSpecLayout.addWidget(self.__specEnvTable)
vSpecLayout = QVBoxLayout()
self.__addSpecButton = QPushButton()
self.__addSpecButton.clicked.connect(self.__addSpecClicked)
self.__addSpecButton.setText('Add')
vSpecLayout.addWidget(self.__addSpecButton)
self.__delSpecButton = QPushButton()
self.__delSpecButton.clicked.connect(self.__delSpecClicked)
self.__delSpecButton.setText('Delete')
vSpecLayout.addWidget(self.__delSpecButton)
self.__editSpecButton = QPushButton()
self.__editSpecButton.clicked.connect(self.__editSpecClicked)
self.__editSpecButton.setText("Edit")
vSpecLayout.addWidget(self.__editSpecButton)
hSpecLayout.addLayout(vSpecLayout)
layoutEnv.addLayout(hSpecLayout)
layout.addWidget(envGroupbox)
# Terminal and profile limits
if self.__action in ["profile", "debug"]:
layout.addWidget(self.__getIDEWideGroupbox())
else:
termGroupbox = self.__getTermGroupbox()
termGroupbox.setTitle("Terminal to run in (IDE wide setting)")
layout.addWidget(termGroupbox)
# Close checkbox
self.__closeCheckBox = QCheckBox("&Close terminal upon "
"successful completion")
self.__closeCheckBox.stateChanged.connect(self.__onCloseChanged)
layout.addWidget(self.__closeCheckBox)
# Buttons at the bottom
buttonBox = QDialogButtonBox(self)
buttonBox.setOrientation(Qt.Horizontal)
buttonBox.setStandardButtons(QDialogButtonBox.Cancel)
self.__runButton = buttonBox.addButton(action,
QDialogButtonBox.AcceptRole)
self.__runButton.setDefault(True)
self.__runButton.clicked.connect(self.onAccept)
layout.addWidget(buttonBox)
buttonBox.rejected.connect(self.close)
return
def __init__(self, parent=None):
super(Widget, self).__init__(parent)
label = QLabel()
label.setText('The neuron that you will be examining will divide the objects you will show it into the ones\n' +
'that it likes and the ones it dislikes\n' +
'Let\'s assume that be recognized objects are flowers\n')
# groupbox1
groupBox1 = QGroupBox()
groupBox1.setTitle('Feature weight')
groupBox1Label1 = QLabel()
groupBox1Label1.setText('Here you enter the neuron\'s weight coefficients for the individual object features. Positve\n' +
'coefficient means approval to the attribute, and negative one will indicate that the given\n' +
'attribute should be disliked by the neuron.')
groupBox1Label2 = QLabel()
groupBox1Label2.setText('Now, enter if you want the neuron to like the flower that is:')
self.spinBoxWeightFragment = QDoubleSpinBox()
self.spinBoxWeightFragment.setValue(1.0)
self.spinBoxWeightFragment.setRange(-100.0, 100.0)
self.spinBoxWeightColorful = QDoubleSpinBox()
self.spinBoxWeightColorful.setValue(2.0)
self.spinBoxWeightColorful.setRange(-100.0, 100.0)
groupBox1HLayout = QHBoxLayout()
groupBox1HLayout.addWidget(QLabel('Fragment:'))
groupBox1HLayout.addWidget(self.spinBoxWeightFragment)
groupBox1HLayout.addWidget(QLabel('Colorful:'))
groupBox1HLayout.addWidget(self.spinBoxWeightColorful)
groupBox1VLayout = QVBoxLayout()
groupBox1VLayout.addWidget(groupBox1Label1)
groupBox1VLayout.addWidget(groupBox1Label2)
groupBox1VLayout.addLayout(groupBox1HLayout)
groupBox1.setLayout(groupBox1VLayout)
# groupbox2
groupBox2 = QGroupBox()
groupBox2.setTitle('Evaluated object')
self.spinBoxObjectFragment = QDoubleSpinBox()
self.spinBoxObjectFragment.setRange(-100.0, 100.0)
self.spinBoxObjectColorful = QDoubleSpinBox()
self.spinBoxObjectColorful.setRange(-100.0, 100.0)
groupBox2HLayout = QHBoxLayout()
groupBox2HLayout.addWidget(QLabel('Fragment'))
groupBox2HLayout.addWidget(self.spinBoxObjectFragment)
groupBox2HLayout.addWidget(QLabel('Colorful'))
groupBox2HLayout.addWidget(self.spinBoxObjectColorful)
groupBox2VLayout = QVBoxLayout()
groupBox2VLayout.addWidget(QLabel('After setting the weight, yout can perform experiments. Enter if the flower is:'))
groupBox2VLayout.addLayout(groupBox2HLayout)
groupBox2.setLayout(groupBox2VLayout)
# groupbox3
groupBox3 = QGroupBox()
groupBox3.setTitle('Neuron\'s response')
pushbuttonGroup3 = QPushButton('Recalculate!')
self.output = QLabel()
self.attitude = QLabel()
groupBox3HLayout1 = QHBoxLayout()
groupBox3HLayout1.addWidget(QLabel('The neuron\'s response value is:'))
groupBox3HLayout1.addWidget(self.output)
groupBox3HLayout2 = QHBoxLayout()
groupBox3HLayout2.addWidget(QLabel('It means that the neuron\'s attitude against the flower is:'))
groupBox3HLayout2.addWidget(self.attitude)
groupBox3HLayout2.addWidget(pushbuttonGroup3)
groupBox3VLayout = QVBoxLayout()
groupBox3VLayout.addLayout(groupBox3HLayout1)
groupBox3VLayout.addLayout(groupBox3HLayout2)
groupBox3.setLayout(groupBox3VLayout)
layout = QVBoxLayout()
layout.addWidget(label)
layout.addWidget(groupBox1)
layout.addWidget(groupBox2)
layout.addWidget(groupBox3)
self.setLayout(layout)
self.setWindowTitle('Single neuron examination (example 01a)')
self.connect(self.spinBoxWeightFragment, SIGNAL('valueChanged(double)'), self.evaluateObject)
self.connect(self.spinBoxWeightColorful, SIGNAL('valueChanged(double)'), self.evaluateObject)
self.connect(self.spinBoxObjectFragment, SIGNAL('valueChanged(double)'), self.evaluateObject)
self.connect(self.spinBoxObjectColorful, SIGNAL('valueChanged(double)'), self.evaluateObject)
self.connect(pushbuttonGroup3, SIGNAL('clicked()'), self.evaluateObject)
self.neuron = Neuron(2)
class SettingsManager(QDialog):
def __init__(self, num, n, parent=None):
super(SettingsManager, self).__init__(parent)
#main
self.par = n
title = Settingz().positions(num)
self.titleID = title['id']
self.titleIDx = str(title['id']) + 'x'
self.titlePage = title['page']
self.titleName = title['name']
self.titleSub = title['subID']
self.titleIcon = title['icon']
self.pagetitle = self.titlePage
self.sessionMain = 0
#stylesheet
stylesheet = Valid().background() + Valid().font()
treeStyleSheet = Valid().treez()
self.groupBox1 = QGroupBox(self.titleName)
self.groupBox2 = QGroupBox('Add')
#items
self.tree = QTreeWidget()
self.tree.setHeaderLabel("Choose " + self.titleName)
self.tree.headerItem().setText(0, 'Name')
self.tree.headerItem().setText(1, 'Abbrv.')
self.tree.setStyleSheet(treeStyleSheet)
self.makeTree()
self.tree.setMinimumHeight(250)
self.tree.clicked.connect(lambda: self.getSelection())
self.tree.itemClicked.connect(lambda state: self.getChecked(state))
#buttons
#add
nImg = Buttons().addButton()
self.pb = QPushButton()
self.pb.setFlat(True)
self.pb.setIcon(QIcon(nImg))
self.pb.setMaximumHeight(30)
self.pb.setMaximumWidth(30)
nImg1 = Buttons().closeButton()
self.pb1 = QPushButton()
self.pb1.setFlat(True)
self.pb1.setIcon(QIcon(nImg1))
self.pb1.setMaximumHeight(30)
self.pb1.setMaximumWidth(30)
nImg2 = Buttons().editButton()
self.pb2 = QPushButton()
self.pb2.setFlat(True)
self.pb2.setIcon(QIcon(nImg2))
self.pb2.setMaximumHeight(30)
self.pb2.setMaximumWidth(30)
nImg3 = Buttons().deleteButton()
self.pb3 = QPushButton()
self.pb3.setFlat(True)
self.pb3.setIcon(QIcon(nImg3))
self.pb3.setMaximumHeight(30)
self.pb3.setMaximumWidth(30)
nImg4 = Buttons().saveButton()
self.pb4 = QPushButton()
self.pb4.setFlat(True)
self.pb4.setIcon(QIcon(nImg4))
self.pb4.setMaximumHeight(30)
self.pb4.setMaximumWidth(30)
nImg5 = Buttons().resetButton()
self.pb5 = QPushButton()
self.pb5.setFlat(True)
self.pb5.setIcon(QIcon(nImg5))
self.pb5.setMaximumHeight(30)
self.pb5.setMaximumWidth(30)
nImg6 = Buttons().closeButton()
self.pb6 = QPushButton()
self.pb6.setFlat(True)
self.pb6.setIcon(QIcon(nImg6))
self.pb6.setMaximumHeight(30)
self.pb6.setMaximumWidth(30)
nImg7 = Buttons().addButton()
self.pb7 = QPushButton()
self.pb7.setFlat(True)
self.pb7.setIcon(QIcon(nImg7))
self.pb7.setMaximumHeight(30)
self.pb7.setMaximumWidth(30)
hbo = QHBoxLayout()
hbo.addStretch()
hbo.addWidget(self.pb1)
hbo.addWidget(self.pb3)
hbo.addWidget(self.pb2)
hbo.addWidget(self.pb7)
vbo = QVBoxLayout()
vbo.addWidget(self.tree)
vbo.addLayout(hbo)
self.l1 = QLabel("Name")
self.le1 = QLineEdit()
self.le1.setObjectName("name")
vals1 = Valid().fullText()
self.le1.setValidator(vals1)
self.le1.setPlaceholderText("Lowercase max 25 letters")
self.l2 = QLabel("Abbrv")
self.le2 = QLineEdit()
self.le2.setObjectName("abbrv")
vals2 = Valid().limitText()
self.le2.setValidator(vals2)
self.le2.setPlaceholderText("Lowercase max 5 letters")
FormLayout = QFormLayout()
FormLayout.addRow(self.l1, self.le1)
FormLayout.addRow(self.l2, self.le2)
Hlayout1 = QHBoxLayout()
Hlayout1.addStretch()
Hlayout1.addWidget(self.pb6)
Hlayout1.addWidget(self.pb5)
Hlayout1.addWidget(self.pb4)
Hlayout1.addWidget(self.pb)
Vlayout1 = QVBoxLayout()
Vlayout1.addLayout(FormLayout)
Vlayout1.addLayout(Hlayout1)
self.groupBox1.setLayout(vbo)
self.groupBox2.setLayout(Vlayout1)
self.groupBox2.hide()
self.connect(self.pb, SIGNAL("clicked()"),
lambda: self.button_add()) #add
self.connect(self.pb1, SIGNAL("clicked()"),
lambda: self.button_close()) #close
self.connect(self.pb2, SIGNAL("clicked()"),
lambda: self.button_edit()) #edit
self.connect(self.pb3, SIGNAL("clicked()"),
lambda: self.button_delete()) #delete
self.connect(self.pb4, SIGNAL("clicked()"),
lambda: self.button_save()) #save
self.connect(self.pb5, SIGNAL("clicked()"),
lambda: self.button_reset()) #reset
self.pb4.hide()
self.pb7.hide()
grid = QGridLayout()
grid.addWidget(self.groupBox1, 0, 0)
grid.addWidget(self.groupBox2, 1, 0)
self.setLayout(grid)
self.setStyleSheet(stylesheet)
self.setWindowIcon(QIcon(self.titleIcon))
self.setWindowTitle(self.pagetitle)
def makeTree(self):
self.tree.clear()
arr = Valid().pullData('datas', '', {'pubID': self.titleID})
self.hold_data = {}
self.hold_mdata = {}
self.hold_data_add = {}
self.hold_data_add_item = {}
if self.titleSub and self.titleSub > 0:
if arr and len(arr) > 0:
for val in arr:
ch = Valid().pullData('datas', '', {'subID': val['id']})
child = QTreeWidgetItem(self.tree)
child.setFlags(child.flags() | Qt.ItemIsUserCheckable)
child.setText(0, str(val['name']).upper())
child.setText(1, str(val['abbrv']).upper())
self.hold_data[val['id']] = child
self.hold_mdata[val['id']] = child
if (val['active'] == 0):
child.setCheckState(0, Qt.Checked)
else:
child.setCheckState(0, Qt.Unchecked)
for va in ch:
child1 = QTreeWidgetItem(child)
child1.setFlags(child1.flags()
| Qt.ItemIsUserCheckable)
child1.setText(0, str(va['name']).upper())
child1.setText(1, str(va['abbrv']).upper())
self.hold_data[va['id']] = child1
if (va['active'] == 0):
child1.setCheckState(0, Qt.Checked)
else:
child1.setCheckState(0, Qt.Unchecked)
child1 = QTreeWidgetItem(child)
child1.setFlags(child1.flags() | Qt.ItemIsUserCheckable)
child1.setText(0, 'Add New Item')
self.hold_data_add_item[val['id']] = child1
else:
if arr and len(arr) > 0:
for val in arr:
child = QTreeWidgetItem(self.tree)
child.setFlags(child.flags() | Qt.ItemIsUserCheckable)
child.setText(0, str(val['name']).upper())
child.setText(1, str(val['abbrv']).upper())
self.hold_data[val['id']] = child
if (val['active'] == 0):
child.setCheckState(0, Qt.Checked)
else:
child.setCheckState(0, Qt.Unchecked)
child = QTreeWidgetItem(self.tree)
child.setFlags(child.flags() | Qt.ItemIsUserCheckable)
child.setText(0, 'Add New')
self.hold_data_add['addnew'] = child
def getChecked(self, a):
g = Db()
for i in self.hold_data:
if self.hold_data[i].checkState(0) == Qt.Checked:
g.update('datas', {'active': 0}, {'id': i})
else:
g.update('datas', {'active': 1}, {'id': i})
if self.titleID == 1:
#if class was changed only reload class menu on main window
self.par.menuStudent()
self.par.dropdownStudent()
def getSelected(self):
r = None
k = None
for i in self.hold_data:
if self.hold_data[i].isSelected():
r = i
for j in self.hold_mdata:
if self.hold_mdata[j].isSelected():
k = j
if r and r > 0:
if r == k:
self.sessionMain = r
else:
self.sessionMain = 0
self.groupBox2.show()
return r
else:
self.groupBox2.hide()
def getSelection(self):
self.le1.clear()
self.le2.clear()
if self.hold_data_add['addnew'].isSelected():
self.sessionMain = 0
self.groupBox2.setTitle('Add New')
self.groupBox2.show()
else:
r = None
for i in self.hold_data_add_item:
if self.hold_data_add_item[i].isSelected():
r = i
if r:
self.sessionMain = r
g = Db()
v = g.selectn('datas', '', 1, {'id': r})
vname = str(v['name']).upper()
self.groupBox2.setTitle('ADD ' + str(vname) + ' ITEM')
self.groupBox2.show()
else:
self.groupBox2.setTitle('Add')
self.groupBox2.hide()
def setActive(self):
g = Db()
for i in self.hold_data:
if self.hold_data[i].checkState(0) == Qt.Checked:
g.update('datas', {'active': 0}, {'id': i})
else:
g.update('datas', {'active': 1}, {'id': i})
def button_add(self):
s1 = self.le1.text()
s2 = self.le2.text()
g = Db()
try:
if (len(s1) > 0) and (len(s2) > 0):
if self.sessionMain == 0:
y = {
'name': s1.lower(),
'abbrv': s2.lower(),
'pubID': self.titleID,
'active': 0
}
else:
y = {
'name': s1.lower(),
'abbrv': s2.lower(),
'subID': self.sessionMain,
'pubID': self.titleIDx,
'active': 0
}
g.insert('datas', y)
self.makeTree()
self.button_reset()
if self.titleID == 1:
#if class was changed only relod class menu on main window
self.par.menuStudent()
self.par.dropdownStudent()
else:
pass
except:
pass
def button_save(self):
row = self.editrow
s1 = self.le1.text()
s2 = self.le2.text()
g = Db()
try:
if (len(s1) > 0) and (len(s2) > 0) and row and row > 0:
y = {'name': s1.lower(), 'abbrv': s2.lower(), 'active': 0}
z = {'id': row}
g.update('datas', y, z)
self.makeTree()
self.button_reset()
if self.titleID == 1:
#if class was changed only relod class menu on main window
self.par.menuStudent()
self.par.dropdownStudent()
else:
pass
except:
pass
def button_delete(self):
row = self.getSelected()
g = Db()
try:
if row and row > 0:
y = {'abbrv': '', 'active': 2}
z = {'id': row}
g.update('datas', y, z)
self.makeTree()
else:
pass
except:
pass
def button_reset(self):
self.le1.clear()
self.le2.clear()
self.groupBox2.setTitle('Add')
self.groupBox2.hide()
self.pb.show()
self.pb4.hide()
self.sessionMain = 0
def button_edit(self):
row = self.getSelected()
self.sessionMain = 0
if row:
self.groupBox2.setTitle('Edit')
self.editrow = row
g = Db()
data = g.selectn('datas', '', 1, {'id': row})
if self.titleID == data['pubID']:
self.sessionMain = 1
else:
self.sessionMain = 0
try:
self.le1.setText(data['name'])
except:
self.le1.setText('')
try:
self.le2.setText(data['abbrv'])
except:
self.le2.setText('')
self.pb.hide()
self.pb4.show()
def button_close(self):
self.close()
def initUploadTab(self):
###Upload Tab###
upload_tab = QWidget()
upload_tab_layout = QVBoxLayout()
self.tabWidget.addTab(upload_tab, "Upload HITs")
# Frames Box
frames_box = QGroupBox()
frames_box.setTitle("Frame selection")
frames_layout = QVBoxLayout()
frames_label = QLabel("Select which frames to upload:")
frames_layout.addWidget(frames_label)
# Init list view
self.view = QListView()
frames_layout.addWidget(self.view)
upload_button = QPushButton("Upload HITs")
upload_button.clicked.connect(self.upload)
frames_layout.addWidget(upload_button)
frames_box.setLayout(frames_layout)
# MotionOptions Box
motionOptionsBox = QGroupBox()
motionOptionsBox.setTitle("Motion Annotation Options")
patchLabel = QLabel("Patch size: 50x50 Pixels")
motionOptionsBoxLayout = QHBoxLayout()
overlapping = QCheckBox("Overlapping Patches")
overlapping.clicked.connect(self.getBalance)
motionOptionsBoxLayout.addWidget(overlapping)
motionOptionsBoxLayout.addWidget(patchLabel)
motionOptionsBox.setLayout(motionOptionsBoxLayout)
# LayerOptions Box
options_box = QGroupBox()
options_box.setTitle('Layer Annotation Options')
blurLabel = QLabel("Amount: 4 Pixels")
options_box_layout = QHBoxLayout()
blur = QCheckBox("Blur Outlines")
options_box_layout.addWidget(blur)
options_box_layout.addWidget(blurLabel)
options_box.setLayout(options_box_layout)
# Disable not needed options
if self.segmentation_mode:
motionOptionsBox.setEnabled(False)
else:
options_box.setEnabled(False)
# Costs
costs_box = QGroupBox()
costs_box.setTitle('Costs')
costs_box_layout = QVBoxLayout()
self.credit_label = QLabel("Your current account balance is:")
self.costLabel = QLabel("Costs per frame:")
costs_box_layout.addWidget(self.credit_label)
costs_box_layout.addWidget(self.costLabel)
costs_box.setLayout(costs_box_layout)
# Upload Box
upload_tab_layout.addWidget(frames_box)
upload_tab_layout.addWidget(motionOptionsBox)
upload_tab_layout.addWidget(options_box)
upload_tab_layout.addWidget(costs_box)
upload_tab.setLayout(upload_tab_layout)
def __createLayout(self):
" Creates the dialog layout "
self.resize(640, 480)
self.setSizeGripEnabled(True)
vboxLayout = QVBoxLayout(self)
hLayout = QHBoxLayout()
self.__propsView = QTreeWidget()
self.__propsView.setAlternatingRowColors(True)
self.__propsView.setRootIsDecorated(False)
self.__propsView.setItemsExpandable(False)
self.__propsView.setSortingEnabled(True)
self.__propsView.setItemDelegate(NoOutlineHeightDelegate(4))
self.__propsView.itemSelectionChanged.connect(
self.__propsSelectionChanged)
propsViewHeader = QTreeWidgetItem(["Property Name", "Property Value"])
self.__propsView.setHeaderItem(propsViewHeader)
self.__propsView.header().setSortIndicator(0, Qt.DescendingOrder)
hLayout.addWidget(self.__propsView)
self.__delButton = QToolButton()
self.__delButton.setText("Delete")
self.__delButton.setFocusPolicy(Qt.NoFocus)
self.__delButton.setEnabled(False)
self.__delButton.clicked.connect(self.__onDel)
hLayout.addWidget(self.__delButton, 0, Qt.AlignBottom)
vboxLayout.addLayout(hLayout)
# Set property part
setGroupbox = QGroupBox(self)
setGroupbox.setTitle("Set Property")
setLayout = QGridLayout(setGroupbox)
setLayout.addWidget(QLabel("Name"), 0, 0, Qt.AlignTop | Qt.AlignRight)
setLayout.addWidget(QLabel("Value"), 1, 0, Qt.AlignTop | Qt.AlignRight)
self.__nameEdit = QLineEdit()
self.__nameEdit.textChanged.connect(self.__nameChanged)
setLayout.addWidget(self.__nameEdit, 0, 1)
self.__valueEdit = QTextEdit()
self.__valueEdit.setAcceptRichText(False)
self.__valueEdit.textChanged.connect(self.__valueChanged)
metrics = QFontMetrics(self.__valueEdit.font())
rect = metrics.boundingRect("X")
self.__valueEdit.setFixedHeight(rect.height() * 4 + 5)
setLayout.addWidget(self.__valueEdit, 1, 1)
self.__setButton = QToolButton()
self.__setButton.setText("Set")
self.__setButton.setFocusPolicy(Qt.NoFocus)
self.__setButton.setEnabled(False)
self.__setButton.clicked.connect(self.__onSet)
setLayout.addWidget(self.__setButton, 1, 2,
Qt.AlignBottom | Qt.AlignHCenter)
sizePolicy = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Maximum)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
setGroupbox.sizePolicy().hasHeightForWidth())
setGroupbox.setSizePolicy(sizePolicy)
vboxLayout.addWidget(setGroupbox)
# Buttons at the bottom
buttonBox = QDialogButtonBox(self)
buttonBox.setOrientation(Qt.Horizontal)
buttonBox.setStandardButtons(QDialogButtonBox.Ok)
buttonBox.button(QDialogButtonBox.Ok).setDefault(True)
buttonBox.accepted.connect(self.close)
vboxLayout.addWidget(buttonBox)
return
def initManageTab(self):
###Manage Tab###
manage_tab = QWidget()
manage_tab_layout = QVBoxLayout()
self.tabWidget.addTab(manage_tab, "Manage HITs")
# Send Box
send_box_layout = QVBoxLayout()
subject = QLineEdit()
subject_label = QLabel("Subject:")
send_text = QTextEdit()
send_button = QPushButton("Send Message")
send_button.setMinimumWidth(135)
send_button.clicked.connect(self.sendMessage)
allTurkers = QRadioButton("Send message to all Turkers")
allTurkers.setChecked(True)
singleTurker = QRadioButton("Send message to single Turker")
workerIDLabel = QLabel('Worker-ID:')
workerID = QLineEdit()
def checkState():
# Set enabled if checked
if allTurkers.isChecked():
workerIDLabel.setEnabled(False)
workerID.setEnabled(False)
else:
workerIDLabel.setEnabled(True)
workerID.setEnabled(True)
# Connect to check state
allTurkers.clicked.connect(checkState)
singleTurker.clicked.connect(checkState)
checkState()
# Choose if single or all turkers receive message
chooseSendLayout = QHBoxLayout()
chooseSendLayout.addWidget(singleTurker)
chooseSendLayout.addWidget(workerIDLabel)
chooseSendLayout.addWidget(workerID)
# Send box layout
send_box = QGroupBox()
send_box_layout.addWidget(allTurkers)
send_box_layout.addLayout(chooseSendLayout)
send_box_layout.addWidget(subject_label)
send_box_layout.addWidget(subject)
send_box_layout.addWidget(send_text)
send_box_layout.addWidget(send_button)
send_box_layout.setAlignment(send_button, Qt.AlignRight)
send_box.setTitle("Notify Workers")
send_box.setLayout(send_box_layout)
manage_tab_layout.addWidget(send_box)
# Pay box
payBox = QGroupBox()
payBox.setTitle("Pay Workers")
payBox_layout = QGridLayout()
approveFeedbackLabel = QLabel("Approve Feedback:")
approveFeedback = QTextEdit()
approveFeedback.setText("Thank you for your work.")
rejectFeedback = QTextEdit()
rejectFeedback.setText("We are sorry, but we cannot accept your work because you did not follow the instructions or submitted careless work.")
payBox_layout.addWidget(approveFeedbackLabel, 0, 0)
payBox_layout.addWidget(approveFeedback , 1, 0, 1, 0)
reject_label = QLabel("{0} HITs will be rejected".format(0))
approve_label = QLabel("{0} HITs will be approved".format(0))
pay_button = QPushButton("Pay Turkers")
pay_button.clicked.connect(self.pay)
payBox_layout.addWidget(reject_label, 2, 0)
payBox_layout.addWidget(approve_label, 3, 0)
payBox_layout.addWidget(pay_button, 4, 0)
payBox.setLayout(payBox_layout)
manage_tab_layout.addWidget(payBox)
# Delete Box
deleteBox = QGroupBox()
deleteBox.setTitle("Clean up finished HITs")
deleteBox_layout = QHBoxLayout()
delete_label = QLabel("{0} HITs are finished and can be deleted".format(0))
delete_button = QPushButton("Delete HITs")
delete_button.clicked.connect(self.delete)
deleteBox_layout.addWidget(delete_label)
deleteBox_layout.addWidget(delete_button)
deleteBox.setLayout(deleteBox_layout)
manage_tab_layout.addWidget(deleteBox)
# Evaluation Button
evalButton = QPushButton("Evaluate")
evalButton.clicked.connect(self.evaluate)
manage_tab_layout.addWidget(evalButton)
# Add layouts to tab
manage_tab.setLayout(manage_tab_layout)
class LeggerWidget(QDockWidget):
"""Legger Network widget with tree tables, cross section and sideview and
legger profile selection"""
# todo:
# - category filter on map and tree instead of shortcut
# - improve performance 'initial loop tree'
closingWidget = pyqtSignal()
def __init__(self, parent=None, iface=None, path_legger_db=None):
"""Constructor."""
super(LeggerWidget, self).__init__(parent)
# store arguments
self.iface = iface
self.path_legger_db = path_legger_db
# init parameters
self.measured_model = ProfileModel()
self.variant_model = ProfileModel()
self.legger_model = LeggerTreeModel()
self.area_model = AreaTreeModel()
if not path_legger_db:
messagebar_message("Database selectie", "Selecteer eerst een legger database", level=1)
raise Exception("Selecteer eerst een legger database")
# create session (before setup_ui)
db = LeggerDatabase(
{'db_path': path_legger_db},
'spatialite'
)
db.create_and_check_fields()
self.session = db.get_session()
# todo: request something to test connection and through error message otherwise
hydro_object_count = self.session.query(HydroObject).count()
if hydro_object_count == 0:
messagebar_message("Database selectie", "Database bevat geen hydrovakken", level=1)
raise Exception("Database bevat geen hydrovakken")
# initial values
self.selected_hydrovak = None
self.active_begroeiings_variant = SHOW_ALL
self.active_begroeiings_variant_strategy = None
# setup ui
self.setup_ui(self)
self.legger_model.setTreeWidget(self.legger_tree_widget)
self.area_model.setTreeWidget(self.startpoint_tree_widget)
self.category_combo.insertItems(0, ['4', '3', '2', '1'])
self.category_combo.setCurrentIndex(0)
self.category_filter = 4
self.begroeiings_varianten = OrderedDict(
[(SHOW_ALL, 'all'), (PRE_SELECTED, 'pre_selected'), ] +
[(v.naam, v) for v in self.session.query(BegroeiingsVariant)]
)
self.begroeiings_combo.insertItems(
0, self.begroeiings_varianten.keys())
self.begroeiings_variant_strategies = OrderedDict((
('alleen dit hydrovak', 'only_this_hydrovak'),
('alle bovenstroomse hydrovakken', 'all_upstream'),
))
self.begroeiings_strategy_combo.insertItems(0, self.begroeiings_variant_strategies.keys())
self.begroeiings_strategy_combo.setCurrentIndex(0)
self.child_selection_strategies = OrderedDict((
('gekozen traject tot waarde', 'selected_branch_till_value'),
('gekozen traject tot eind', 'selected_branch_till_end'),
('alleen dit hydrovak', 'selected_hydrovak'),
('bovenstrooms (met zijtakken) tot waarde ', 'upstream_till_value'),
('bovenstrooms (met zijtakken) tot eind', 'upstream_till_end'),
))
self.child_selection_strategy_combo.insertItems(0, self.child_selection_strategies.keys())
self.child_selection_strategy_combo.setCurrentIndex(0)
# create line layer and add to map
self.layer_manager = LeggerMapManager(self.iface, self.path_legger_db)
self.line_layer = self.layer_manager.get_line_layer(add_to_map=True)
self.vl_tree_layer = self.layer_manager.get_virtual_tree_layer(add_to_map=True)
self.vl_endpoint_layer = self.layer_manager.get_endpoint_layer(add_to_map=True)
self.vl_track_layer = self.layer_manager.get_track_layer(add_to_map=True)
self.vl_hover_layer = self.layer_manager.get_hover_layer(add_to_map=True)
self.vl_selected_layer = self.layer_manager.get_selected_layer(add_to_map=True)
self.vl_startpoint_hover_layer = self.layer_manager.get_hover_startpoint_layer(add_to_map=True)
self.map_visualisation = LeggerMapVisualisation(
self.iface, self.line_layer.crs())
# init network
line_direct = self.layer_manager.get_line_layer(geometry_col='line')
field_nr = line_direct.fieldNameIndex('direction')
director = QgsLineVectorLayerDirector(
line_direct, field_nr, '2', '1', '3', 3)
self.network = NewNetwork(
line_direct, self.line_layer, director, None, self.vl_tree_layer, self.vl_endpoint_layer
)
# add listeners
self.category_combo.currentIndexChanged.connect(self.category_change)
self.variant_model.dataChanged.connect(self.data_changed_variant)
self.legger_model.dataChanged.connect(self.data_changed_legger_tree)
self.area_model.dataChanged.connect(self.data_changed_area_model)
self.show_manual_input_button.clicked.connect(
self.show_manual_input_window)
self.next_endpoint_button.clicked.connect(
self.set_next_endpoint)
self.begroeiings_combo.currentIndexChanged.connect(self.onSelectBegroeiingsVariant)
# self.begroeiings_strategy_combo.currentIndexChanged.connect(self.onSelectBegroeiingsVariantStrategy)
# create and init startpoint (AreaTree) model
def loop_over(parent, data):
for child in data['children']:
area = area_class(child)
item = AreaTreeItem(area, parent)
parent.appendChild(item)
loop_over(item, child)
# get startingpoints and select first
sp_tree = self.network.get_start_arc_tree()
root = AreaTreeItem(None, None)
loop_over(root, sp_tree)
self.area_model.setNewTree(root.childs)
# initial, select first area
first_area = root.child(0)
self.area_model.setDataItemKey(first_area, 'selected', True)
def category_change(self, nr):
"""
filters the tree and re-initialize legger tree
nr: nr of selected option (hydrovak category) of combobox
return: -
"""
self.category_filter = int(self.category_combo.currentText())
root = LeggerTreeItem(None, None)
self.network.get_tree_data(root, self.category_filter)
self.legger_model.setNewTree(root.childs)
self.legger_model.set_column_sizes_on_view(self.legger_tree_widget)
if len(root.childs) > 0:
self.loop_tree(root.childs[0], initial=True)
def show_manual_input_window(self):
self._new_window = NewWindow(
self.legger_model.selected,
self.session,
callback_on_save=self.update_available_profiles)
self._new_window.show()
def set_next_endpoint(self):
"""
select the next endpoint in a traject with no selected variant
called by the next_endpoint_button
returns: -
"""
sp = self.legger_model.sp
if sp is None:
messagebar_message('Fout',
'Selecteer eerst een startpunt (kolom sp)',
level=1, # Warning
duration=15)
return
missing_values, endpoint = self.legger_model.find_endpoint_traject_without_legger_profile(sp)
if not missing_values or endpoint is None:
messagebar_message('Eindpunt selectie',
'Geen traject gevonden met ontbrekende legger',
duration=15)
else:
self.legger_model.open_till_endpoint(endpoint, close_other=True)
self.legger_model.setDataItemKey(endpoint, 'ep', True)
def loop_tree(self,
node,
depth=None,
initial=False,
hover=False,
begroeiingsvariant=None,
variant_id=None,
child_strategy='selected_branch_till_value',
begroeiings_strategy='pre_selected',
traject_nodes=None):
"""
recursive loop over younger items where depth can be applied according to
available profiles
initial (bool): initiele loop om aantal berekende velden te bepalen
child_strategy (str):
options:
- 'selected_branch_till_value',
- 'selected_branch_till_end',
- 'selected_hydrovak',
- 'upstream_till_value',
- 'upstream_till_end'
begroeiings_strategy (str):
options:
- 'only_this_hydrovak'
- 'all_upstream'
- 'minimum' --> not implemented yet
- 'maximum' --> not implemented yet
:return:
"""
output_hydrovakken = [node]
if initial:
variant_id = node.hydrovak.get('selected_variant_id')
depth = node.hydrovak.get('selected_depth')
elif (variant_id is None and child_strategy in ['selected_branch_till_value', 'upstream_till_value'] and
node.hydrovak.get('selected_variant_id')):
# stop here, already value there
return
if initial and variant_id is None:
pass
elif node.hydrovak['variant_min_depth'] is None:
# no variants available, so skip this one and continue downstream
pass
else:
# get selected variant. if variant_id is None, try based on depth and begroeiingsvariant
if variant_id is not None:
profile_variant = self.session.query(Varianten).filter(Varianten.id == variant_id)
if begroeiingsvariant is None or begroeiingsvariant == 'all' and profile_variant.count():
begroeiingsvariant = profile_variant[0].begroeiingsvariant_id
else:
# use given begroeiingsvariant if stategy is all_upstream otherwise use begroeiingsgraad
# set on hydrovak or the default begroeiingsgraad
# (correct begroeiingsvariant of first hydrovak is selected by setting variant_id)
# "type(begroeiingsvariant) != str" is to filter out setting 'all'
if begroeiings_strategy == 'all_upstream' and begroeiingsvariant is not None and type(
begroeiingsvariant) != str:
profile_variant = self.session.query(Varianten).filter(
Varianten.hydro_id == node.hydrovak.get('hydro_id'),
Varianten.begroeiingsvariant_id == begroeiingsvariant,
Varianten.diepte < depth + precision,
Varianten.diepte > depth - precision
)
else:
profile_variant = self.session.query(Varianten).filter(
Varianten.hydro_id == node.hydrovak.get('hydro_id'),
or_(Varianten.hydro.has(
HydroObject.begroeiingsvariant_id == Varianten.begroeiingsvariant_id),
and_(Varianten.hydro.has(HydroObject.begroeiingsvariant_id == None),
Varianten.begroeiingsvariant.has(is_default=True))),
Varianten.diepte < depth + precision,
Varianten.diepte > depth - precision
)
if profile_variant.count() > 0:
if hover:
# self.legger_model.setDataItemKey(node, 'sel d', depth)
self.legger_model.setDataItemKey(node, 'selected_depth_tmp', depth)
else:
# get all info to display in legger table
over_depth = node.hydrovak.get('depth') - depth if node.hydrovak.get('depth') is not None else None
profilev = profile_variant.first()
width = profilev.waterbreedte
over_width = node.hydrovak.get('width') - width \
if node.hydrovak.get('width') is not None else None
figuren = profilev.figuren
score = None
if len(figuren) > 0:
figuur = figuren[0]
over_width = "{0:.2f}".format(figuur.t_overbreedte_l + figuur.t_overbreedte_r) \
if figuur.t_overbreedte_l is not None else over_width
score = "{0:.2f}".format(figuur.t_fit)
over_depth = "{0:.2f}".format(
figuur.t_overdiepte) if figuur.t_overdiepte is not None else over_depth
else:
over_depth = "{}*".format(try_round(over_depth, 2, '-'))
over_width = "{}*".format(try_round(over_width, 2, '-'))
verhang = try_round(profilev.verhang, 1, '-')
self.legger_model.setDataItemKey(node, 'selected_depth', depth)
self.legger_model.setDataItemKey(node, 'selected_width', width)
self.legger_model.setDataItemKey(node, 'selected_variant_id', profilev.id)
self.legger_model.setDataItemKey(node, 'selected_begroeiingsvariant_id',
profilev.begroeiingsvariant_id)
self.legger_model.setDataItemKey(node, 'verhang', verhang)
self.legger_model.setDataItemKey(node, 'score', score)
self.legger_model.setDataItemKey(node, 'over_depth', over_depth)
self.legger_model.setDataItemKey(node, 'over_width', over_width)
if not initial:
# save selected variant
selected = self.session.query(GeselecteerdeProfielen).filter(
GeselecteerdeProfielen.hydro_id == node.hydrovak.get('hydro_id')).first()
if selected:
selected.variant = profilev
else:
selected = GeselecteerdeProfielen(
hydro_id=node.hydrovak.get('hydro_id'),
variant_id=profilev.id
)
self.session.add(selected)
elif not initial:
# no variant which fits criteria. stop iteration here
return
if begroeiings_strategy == 'only_this_hydrovak':
begroeiingsvariant = None
elif begroeiings_strategy == 'all_upstream':
# keep variant as it is
pass
# elif begroeiings_strategy == 'minimum':
# pass
# elif begroeiings_strategy == 'maximum':
# pass
if child_strategy == 'selected_hydrovak':
loop_childs = []
elif child_strategy in ['upstream_till_value', 'upstream_till_end'] or initial:
loop_childs = node.younger()
else: # 'selected_branch_till_value', 'selected_branch_till_end'
if traject_nodes is None or len(traject_nodes) == 0:
loop_childs = []
else:
child = traject_nodes.pop(0)
loop_childs = [child]
for young in loop_childs:
hydrovakken = self.loop_tree(
young,
depth=depth,
initial=initial,
hover=hover,
begroeiingsvariant=begroeiingsvariant,
child_strategy=child_strategy,
begroeiings_strategy=begroeiings_strategy,
traject_nodes=traject_nodes,
)
if hydrovakken is not None:
output_hydrovakken += hydrovakken
return output_hydrovakken
def data_changed_legger_tree(self, index, to_index):
"""
changes during selection and hover of hydrovak / legger tree
index (QIndex): index of changed field
"""
# activate draw
node = self.legger_model.data(index, role=Qt.UserRole)
if self.legger_model.columns[index.column()].get('field') == 'hover':
ids = [feat.id() for feat in self.vl_hover_layer.getFeatures()]
self.vl_hover_layer.dataProvider().deleteFeatures(ids)
if node.hydrovak.get('hover'):
features = []
feat = QgsFeature()
feat.setGeometry(node.hydrovak.get('feature').geometry())
try:
feat.setAttributes([
node.hydrovak.get('feature')['id']])
features.append(feat)
self.vl_hover_layer.dataProvider().addFeatures(features)
except KeyError:
pass
self.vl_hover_layer.commitChanges()
self.vl_hover_layer.updateExtents()
self.vl_hover_layer.triggerRepaint()
elif self.legger_model.columns[index.column()].get('field') == 'selected':
if self.legger_model.data(index, role=Qt.CheckStateRole) == Qt.Unchecked:
self.save_remarks()
self.selected_variant_remark.setPlainText('')
self.selected_variant_remark.setDisabled(True)
ids = [feat.id() for feat in self.vl_selected_layer.getFeatures()]
self.vl_selected_layer.dataProvider().deleteFeatures(ids)
if node.hydrovak.get('selected'):
if node.hydrovak.get('tak'):
self.legger_model.setDataItemKey(node.younger()[1], 'selected', Qt.Checked)
else:
features = []
feat = QgsFeature()
feat.setGeometry(node.hydrovak.get('feature').geometry())
feat.setAttributes([
node.hydrovak.get('feature')['id']])
features.append(feat)
self.vl_selected_layer.dataProvider().addFeatures(features)
self.vl_selected_layer.commitChanges()
self.vl_selected_layer.updateExtents()
self.vl_selected_layer.triggerRepaint()
if node.hydrovak.get('tak'):
pass
elif node.hydrovak.get('selected'):
self.on_select_edit_hydrovak(self.legger_model.data(index, role=Qt.UserRole))
self.show_manual_input_button.setDisabled(False)
elif (self.legger_model.selected is None or
self.legger_model.data(index, role=Qt.UserRole) == self.legger_model.selected):
self.variant_model.removeRows(0, len(self.variant_model.rows))
self.show_manual_input_button.setDisabled(True)
elif self.legger_model.columns[index.column()].get('field') in ['ep', 'sp']:
# clear current track
if self.legger_model.sp is None or self.legger_model.ep is None:
ids = [feat.id() for feat in self.vl_track_layer.getFeatures()]
self.vl_track_layer.dataProvider().deleteFeatures(ids)
self.vl_track_layer.commitChanges()
self.vl_track_layer.triggerRepaint()
elif node.hydrovak.get('tak'):
if self.legger_model.columns[index.column()].get('field') == 'ep':
self.legger_model.setDataItemKey(node.younger()[1], 'ep', Qt.Checked)
if self.legger_model.columns[index.column()].get('field') == 'sp':
self.legger_model.setDataItemKey(node.younger()[1], 'sp', Qt.Checked)
elif self.legger_model.sp and self.legger_model.ep:
features = []
def loop_rec(node):
if node.hydrovak.get('tak'):
node = node.older()
else:
feat = QgsFeature()
feat.setGeometry(node.hydrovak.get('feature').geometry())
feat.setAttributes([
node.hydrovak.get('feature')['id']])
features.append(feat)
if node != self.legger_model.sp:
loop_rec(node.older())
loop_rec(self.legger_model.ep)
self.vl_track_layer.dataProvider().addFeatures(features)
self.vl_track_layer.commitChanges()
self.vl_track_layer.updateExtents()
self.vl_track_layer.triggerRepaint()
if self.legger_model.sp is not None:
self.next_endpoint_button.setDisabled(False)
else:
self.next_endpoint_button.setDisabled(True)
def data_changed_area_model(self, index, to_index):
"""
changes during selection and hover of area (start point) table
index (QIndex): index of changed field
"""
if self.area_model.columns[index.column()].get('field') == 'selected':
# clear display elements
if self.area_model.data(index, role=Qt.CheckStateRole) == Qt.Checked:
self.variant_model.removeRows(0, len(self.variant_model.rows))
self.legger_model.set_column_value('hover', False)
self.legger_model.set_column_value('selected', False)
self.legger_model.set_column_value('ep', False)
self.legger_model.set_column_value('sp', False)
area_item = self.area_model.data(index, role=Qt.UserRole)
self.network.set_tree_start_arc(area_item.area.get('arc_nr'))
self.legger_model.clear()
root = LeggerTreeItem(None, None)
self.network.get_tree_data(root, self.category_filter)
self.legger_model.setNewTree(root.childs)
self.legger_model.set_column_sizes_on_view(self.legger_tree_widget)
if len(root.childs) > 0:
self.loop_tree(root.childs[0], initial=True)
canvas = self.iface.mapCanvas()
extent = self.vl_tree_layer.extent()
if extent:
extent.scale(1.2)
canvas.setExtent(extent)
elif self.area_model.columns[index.column()].get('field') == 'hover':
ids = [feat.id() for feat in self.vl_startpoint_hover_layer.getFeatures()]
self.vl_startpoint_hover_layer.dataProvider().deleteFeatures(ids)
value = self.area_model.data(index, role=Qt.DisplayRole)
if self.area_model.data(index, role=Qt.CheckStateRole) == Qt.Checked:
features = []
node = self.area_model.data(index, role=Qt.UserRole)
feat = QgsFeature()
feat.setGeometry(QgsGeometry.fromPoint(node.area.get('point')))
feat.setAttributes([
node.area.get('vertex_id')])
features.append(feat)
self.vl_startpoint_hover_layer.dataProvider().addFeatures(features)
self.vl_startpoint_hover_layer.commitChanges()
self.vl_startpoint_hover_layer.updateExtents()
self.vl_startpoint_hover_layer.triggerRepaint()
def data_changed_variant(self, index):
"""
changes during selection and hover of variant table
index (QIndex): index of changed field
"""
item = self.variant_model.rows[index.row()]
if self.variant_model.columns[index.column()].name == 'active':
if item.active.value:
# only one selected at the time
item.color.value = list(item.color.value)[:3] + [255]
for row in self.variant_model.rows:
if row.active.value and row != item:
row.active.value = False
depth = item.depth.value
selected_variant_id = item.name.value
traject = []
if self.legger_model.ep:
traject = self.legger_model.ep.up(self.legger_model.selected)
traject.reverse()
if len(traject) > 0:
traject.pop(0)
else:
messagebar_message(
'Traject nodig',
'Selecteer eerst een traject (sp en ep) voordat diepte kan worden doorgetrokken.',
1,
15)
return
self.loop_tree(
self.legger_model.selected,
depth=depth,
initial=False,
variant_id=selected_variant_id,
begroeiingsvariant=self.get_begroeiings_variant(),
child_strategy=self.get_child_selection_strategy(),
begroeiings_strategy=self.get_begroeiings_strategy(),
traject_nodes=traject
)
self.session.commit()
# trigger repaint of sideview
self.sideview_widget.draw_selected_lines(self.sideview_widget._get_data())
else:
item.color.value = list(item.color.value)[:3] + [20]
# trigger repaint of sideview
self.sideview_widget.draw_selected_lines(self.sideview_widget._get_data())
elif self.variant_model.columns[index.column()].name == 'hover':
if item.hover.value:
# only one selected at the time
item.color.value = list(item.color.value)[:3] + [255]
for row in self.variant_model.rows:
if row.hover.value and row != item:
row.hover.value = False
depth = item.depth.value
selected_variant_id = item.name.value
traject = []
self.legger_model.set_column_value('selected_depth_tmp', None)
if self.legger_model.ep:
traject = self.legger_model.ep.up(self.legger_model.selected)
traject.reverse()
if len(traject) > 0:
traject.pop(0)
else:
messagebar_message(
'Traject nodig',
'Selecteer eerst een traject (sp en ep) voordat diepte kan worden doorgetrokken.',
1,
15)
return
hydrovakken = self.loop_tree(
self.legger_model.selected,
depth=depth,
initial=False,
hover=True,
variant_id=selected_variant_id,
begroeiingsvariant=self.get_begroeiings_variant(),
child_strategy=self.get_child_selection_strategy(),
begroeiings_strategy=self.get_begroeiings_strategy(),
traject_nodes=traject
)
# set map visualisation of selected hydrovakken
self.network._virtual_tree_layer.setSubsetString(
'"hydro_id" in (\'{ids}\')'.format(
ids='\',\''.join([str(hydrovak.hydrovak['hydro_id']) for hydrovak in hydrovakken])))
# trigger repaint of sideview
self.sideview_widget.draw_selected_lines(self.sideview_widget._get_data())
else:
self.legger_model.set_column_value('selected_depth_tmp', None)
# reset map visualisation
self.network._virtual_tree_layer.setSubsetString('')
# trigger repaint of sideview
self.sideview_widget.draw_selected_lines(self.sideview_widget._get_data())
def on_select_edit_hydrovak(self, item):
"""
set elements after selection of a hydrovak for profile selection
item (LeggerTreeItem): selected hydrovak LeggerTreeItem
return: -
"""
hydro_object = self.session.query(HydroObject).filter_by(id=item.hydrovak.get('hydro_id')).first()
if hydro_object is None:
self.selected_variant_remark.setPlainText('')
self.selected_variant_remark.setDisabled(True)
return None
self.selected_hydrovak = item
self.selected_hydrovak = item
self.selected_hydrovak_db = hydro_object
self.selected_variant_remark.setDisabled(False)
self.selected_variant_remark.setPlainText(item.hydrovak.get('selected_remarks'))
self.update_available_variants()
def save_remarks(self):
if self.selected_hydrovak:
if self.selected_hydrovak_db:
self.selected_hydrovak_db.opmerkingen = self.selected_variant_remark.toPlainText()
self.session.add(self.selected_hydrovak_db)
self.session.commit()
self.legger_model.setDataItemKey(
self.selected_hydrovak,
'selected_remarks',
self.selected_variant_remark.toPlainText())
def update_available_variants(self):
item = self.selected_hydrovak
hydro_object = self.selected_hydrovak_db
self.variant_model.removeRows(0, len(self.variant_model.rows))
selected_variant_id = item.hydrovak.get('selected_variant_id')
var = self.session.query(Varianten) \
.join(BegroeiingsVariant) \
.outerjoin(ProfielFiguren) \
.filter(Varianten.hydro == hydro_object) \
.order_by(Varianten.diepte)
if self.active_begroeiings_variant == SHOW_ALL:
pass
elif self.active_begroeiings_variant == PRE_SELECTED:
var = var.filter(or_(Varianten.begroeiingsvariant == hydro_object.begroeiingsvariant,
Varianten.id == selected_variant_id))
elif self.active_begroeiings_variant is not None:
var = var.filter(or_(BegroeiingsVariant.naam == self.active_begroeiings_variant,
Varianten.id == selected_variant_id))
from legger import settings
verhang = 3.0
color_map = (
(1.0, settings.LOW_COLOR),
(3.0, settings.OK_COLOR),
(4.0, settings.HIGH_COLOR),
)
profs = []
for profile in var.all():
active = selected_variant_id == profile.id
over_width = None
over_depth = None
if profile.figuren:
over_width = profile.figuren[0].t_overbreedte_l + profile.figuren[0].t_overbreedte_r
over_depth = profile.figuren[0].t_overdiepte
else:
if profile.hydro.kenmerken and profile.hydro.kenmerken[0].diepte is not None and profile.diepte is not None:
over_depth = profile.hydro.kenmerken[0].diepte - profile.diepte
if profile.hydro.kenmerken and profile.hydro.kenmerken[0].breedte is not None and profile.waterbreedte is not None:
over_width = profile.hydro.kenmerken[0].breedte - profile.waterbreedte
profs.append({
'name': profile.id,
'active': active, # digits differ far after the
'depth': profile.diepte,
'begroeiingsvariant': profile.begroeiingsvariant.naam,
'score': profile.figuren[0].t_fit if profile.figuren else None,
'over_depth': over_depth if over_depth is not None else None,
'over_width': over_width if over_depth is not None else None,
'over_width_color': [255, 0, 0] if over_width < 0 else [255, 255, 255],
'verhang': profile.verhang,
'color': interpolated_color(value=profile.verhang, color_map=color_map,
alpha=(255 if active else 80)),
'points': [
(-0.5 * profile.waterbreedte, hydro_object.streefpeil),
(-0.5 * profile.bodembreedte, hydro_object.streefpeil - profile.diepte),
(0.5 * profile.bodembreedte, hydro_object.streefpeil - profile.diepte),
(0.5 * profile.waterbreedte, hydro_object.streefpeil),
]
})
self.variant_model.insertRows(profs)
def update_available_profiles(self, item, variant):
"""
used for updating ranges after adding a profile manually
"""
# update variant table
self.on_select_edit_hydrovak(item)
diepte = float(variant.diepte)
if item.hydrovak.get('variant_max_depth') is None or diepte > item.hydrovak.get('variant_max_depth'):
self.legger_model.setDataItemKey(item, 'variant_max_depth', diepte)
if item.hydrovak.get('variant_min_depth') is None or diepte < item.hydrovak.get('variant_min_depth'):
self.legger_model.setDataItemKey(item, 'variant_min_depth', diepte)
def onSelectBegroeiingsVariant(self):
self.active_begroeiings_variant = self.begroeiings_combo.currentText()
self.update_available_variants()
def get_begroeiings_variant(self):
return self.begroeiings_varianten[self.begroeiings_combo.currentText()]
def get_begroeiings_strategy(self):
return self.begroeiings_variant_strategies[self.begroeiings_strategy_combo.currentText()]
def get_child_selection_strategy(self):
return self.child_selection_strategies[self.child_selection_strategy_combo.currentText()]
def closeEvent(self, event):
"""
close event for widget, including removal of layers and disconnection of listeners
event: close event
return: None
"""
self.save_remarks()
if self.vl_tree_layer in QgsMapLayerRegistry.instance().mapLayers().values():
QgsMapLayerRegistry.instance().removeMapLayer(self.vl_tree_layer)
if self.line_layer in QgsMapLayerRegistry.instance().mapLayers().values():
QgsMapLayerRegistry.instance().removeMapLayer(self.line_layer)
if self.vl_endpoint_layer in QgsMapLayerRegistry.instance().mapLayers().values():
QgsMapLayerRegistry.instance().removeMapLayer(self.vl_endpoint_layer)
if self.vl_track_layer in QgsMapLayerRegistry.instance().mapLayers().values():
QgsMapLayerRegistry.instance().removeMapLayer(self.vl_track_layer)
if self.vl_hover_layer in QgsMapLayerRegistry.instance().mapLayers().values():
QgsMapLayerRegistry.instance().removeMapLayer(self.vl_hover_layer)
if self.vl_selected_layer in QgsMapLayerRegistry.instance().mapLayers().values():
QgsMapLayerRegistry.instance().removeMapLayer(self.vl_selected_layer)
if self.vl_startpoint_hover_layer in QgsMapLayerRegistry.instance().mapLayers().values():
QgsMapLayerRegistry.instance().removeMapLayer(self.vl_startpoint_hover_layer)
self.category_combo.currentIndexChanged.disconnect(self.category_change)
self.show_manual_input_button.clicked.disconnect(self.show_manual_input_window)
self.next_endpoint_button.clicked.disconnect(self.set_next_endpoint)
self.variant_model.dataChanged.disconnect(self.data_changed_variant)
self.legger_model.dataChanged.disconnect(self.data_changed_legger_tree)
self.area_model.dataChanged.disconnect(self.data_changed_area_model)
self.begroeiings_combo.currentIndexChanged.disconnect(self.onSelectBegroeiingsVariant)
self.legger_model.setTreeWidget(None)
self.closingWidget.emit()
event.accept()
def setup_ui(self, dock_widget):
"""
initiate main Qt building blocks of interface
:param dock_widget: QDockWidget instance
"""
dock_widget.setObjectName("dock_widget")
dock_widget.setAttribute(Qt.WA_DeleteOnClose)
self.dock_widget_content = QWidget(self)
self.dock_widget_content.setObjectName("dockWidgetContent")
self.main_vlayout = QVBoxLayout(self)
self.dock_widget_content.setLayout(self.main_vlayout)
# add button to add objects to graphs
self.button_bar_hlayout = QHBoxLayout(self)
self.show_manual_input_button = QPushButton(self)
self.button_bar_hlayout.addWidget(self.show_manual_input_button)
self.show_manual_input_button.setDisabled(True)
self.button_bar_hlayout.addWidget(QLabel("filter t/m categorie:"))
self.category_combo = QComboBox(self)
self.button_bar_hlayout.addWidget(self.category_combo)
self.next_endpoint_button = QPushButton(self)
self.button_bar_hlayout.addWidget(self.next_endpoint_button)
self.next_endpoint_button.setDisabled(True)
self.child_selection_strategy_combo = QComboBox(self)
self.button_bar_hlayout.addWidget(QLabel("doortrekken tot:"))
self.button_bar_hlayout.addWidget(self.child_selection_strategy_combo)
spacer_item = QSpacerItem(40,
20,
QSizePolicy.Expanding,
QSizePolicy.Minimum)
self.button_bar_hlayout.addItem(spacer_item)
# self.button_bar_hlayout.addItem(QLabel("doortrekken tot:"))
# self.button_bar_hlayout.addItem(self.begroeiings_strategy_combo)
self.main_vlayout.addLayout(self.button_bar_hlayout)
# add tabWidget for graphWidgets
self.contentLayout = QHBoxLayout(self)
self.tree_table_tab = QTabWidget(self)
sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Expanding)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.tree_table_tab.sizePolicy().hasHeightForWidth())
self.tree_table_tab.setSizePolicy(sizePolicy)
self.tree_table_tab.setMinimumSize(QSize(850, 0))
self.contentLayout.addWidget(self.tree_table_tab)
# startpointTree
self.startpoint_tree_widget = StartpointTreeWidget(self, self.area_model)
# sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Expanding)
# sizePolicy.setHorizontalStretch(0)
# sizePolicy.setVerticalStretch(0)
# sizePolicy.setHeightForWidth(
# self.legger_tree_widget.sizePolicy().hasHeightForWidth())
# self.legger_tree_widget.setSizePolicy(sizePolicy)
# self.legger_tree_widget.setMinimumSize(QSize(750, 0))
self.tree_table_tab.addTab(self.startpoint_tree_widget, 'startpunten')
# LeggerTree
self.legger_tree_widget = LeggerTreeWidget(self, self.legger_model)
# sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Expanding)
# sizePolicy.setHorizontalStretch(0)
# sizePolicy.setVerticalStretch(0)
# sizePolicy.setHeightForWidth(
# self.legger_tree_widget.sizePolicy().hasHeightForWidth())
# self.legger_tree_widget.setSizePolicy(sizePolicy)
# self.legger_tree_widget.setMinimumSize(QSize(750, 0))
self.tree_table_tab.addTab(self.legger_tree_widget, 'hydrovakken')
# graphs
self.graph_vlayout = QVBoxLayout(self)
# Graph
self.plot_widget = LeggerPlotWidget(
self, session=self.session,
legger_model=self.legger_model,
variant_model=self.variant_model)
sizePolicy = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Expanding)
sizePolicy.setHorizontalStretch(1)
sizePolicy.setVerticalStretch(1)
sizePolicy.setHeightForWidth(
self.plot_widget.sizePolicy().hasHeightForWidth())
self.plot_widget.setSizePolicy(sizePolicy)
self.plot_widget.setMinimumSize(QSize(250, 150))
self.graph_vlayout.addWidget(self.plot_widget, 2)
# Sideview Graph
self.sideview_widget = LeggerSideViewPlotWidget(
self, session=self.session,
legger_model=self.legger_model)
sizePolicy = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Expanding)
sizePolicy.setHorizontalStretch(1)
sizePolicy.setVerticalStretch(1)
sizePolicy.setHeightForWidth(
self.sideview_widget.sizePolicy().hasHeightForWidth())
self.sideview_widget.setSizePolicy(sizePolicy)
self.sideview_widget.setMinimumSize(QSize(250, 150))
self.graph_vlayout.addWidget(self.sideview_widget)
self.contentLayout.addLayout(self.graph_vlayout, 2)
self.rightVstack = QVBoxLayout(self)
sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Expanding)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
self.begroeiings_combo = QComboBox(self)
self.begroeiings_strategy_combo = QComboBox(self)
self.groupBox_begroeiings = QGroupBox(self)
self.groupBox_begroeiings.setTitle("begroeiingsfilter en voor welk deel")
vbox_strat = QVBoxLayout()
vbox_strat.addWidget(self.begroeiings_combo)
vbox_strat.addWidget(self.begroeiings_strategy_combo)
self.groupBox_begroeiings.setLayout(vbox_strat)
self.rightVstack.addWidget(self.groupBox_begroeiings)
# variantentable
self.plot_item_table = VariantenTable(self, variant_model=self.variant_model)
self.plot_item_table.setMinimumWidth(380)
self.rightVstack.addWidget(self.plot_item_table)
self.selected_variant_remark = QPlainTextEdit(self)
self.selected_variant_remark.setFixedHeight(100)
self.selected_variant_remark.setDisabled(True)
self.rightVstack.addWidget(self.selected_variant_remark)
self.contentLayout.addLayout(self.rightVstack, 0)
self.main_vlayout.addLayout(self.contentLayout)
# add dockwidget
dock_widget.setWidget(self.dock_widget_content)
self.retranslate_ui(dock_widget)
QMetaObject.connectSlotsByName(dock_widget)
def retranslate_ui(self, dock_widget):
pass
dock_widget.setWindowTitle(_translate(
"DockWidget", "Legger", None))
self.show_manual_input_button.setText(_translate(
"DockWidget", "Voeg profiel toe", None))
self.next_endpoint_button.setText(_translate(
"DockWidget", "Volgend eindpunt", None))
def __init__(self, parent=None):
super(Widget, self).__init__(parent)
groupBox1 = QGroupBox()
groupBox1.setTitle('Feature weights (model object)')
self.w1 = QDoubleSpinBox()
self.w1.setRange(-10.0, 10.0)
self.w1.setValue(5.0)
self.w2 = QDoubleSpinBox()
self.w2.setRange(-10.0, 10.0)
self.w2.setValue(5.0)
buttonHelpGroupBox1 = QPushButton('help')
buttonHelpGroupBox1.setToolTip('Here you enter the neuron\'s weight coefficients for the individual object features.\n' +
'Positive coefficient means approval to the feature, and negative one will indicate that\n' +
'the given feature should be disliked by the neuron.\n\n' +
'Now the only important thing will be the numeric values of the weights and input signals.\n' +
'However, if you want, you can still imagine that the examined objects are flowers - as\n' +
'in the previous program. The w(1) weight will then indicate the fragrance intensity of\n' +
'the flower, and the w(2) weight - its colour intensity.\n\n' +
'You can also think about this as the location of the "model object".')
buttonHelpGroupBox1.setEnabled(False)
hBoxLayoutGroupBox1 = QHBoxLayout()
hBoxLayoutGroupBox1.addWidget(QLabel('w(1) = '))
hBoxLayoutGroupBox1.addWidget(self.w1)
hBoxLayoutGroupBox1.addWidget(QLabel('w(2) = '))
hBoxLayoutGroupBox1.addWidget(self.w2)
hBoxLayoutGroupBox1.addWidget(buttonHelpGroupBox1)
groupBox1.setLayout(hBoxLayoutGroupBox1)
groupBox2 = QGroupBox()
groupBox2.setTitle('Evaluated object')
self.x1 = QDoubleSpinBox()
self.x1.setRange(-10.0, 10.0)
self.x1.setValue(-5.0)
self.x2 = QDoubleSpinBox()
self.x2.setRange(-10.0, 10.0)
self.x2.setValue(-5.0)
buttonHelpGroupBox2 = QPushButton('help')
buttonHelpGroupBox2.setToolTip('Here you can enter the feature values of the evaluated object. As above, you are\n' +
'free to imagine that it is a flower whose fragrance intensity is x(1) and colour intensity\n' +
'is x(2).a')
buttonHelpGroupBox2.setEnabled(False)
hBoxLayoutGroupBox2 = QHBoxLayout()
hBoxLayoutGroupBox2.addWidget(QLabel('x(1) = '))
hBoxLayoutGroupBox2.addWidget(self.x1)
hBoxLayoutGroupBox2.addWidget(QLabel('x(2) = '))
hBoxLayoutGroupBox2.addWidget(self.x2)
hBoxLayoutGroupBox2.addWidget(buttonHelpGroupBox2)
groupBox2.setLayout(hBoxLayoutGroupBox2)
groupBox3 = QGroupBox()
groupBox3.setTitle('Graph')
self.colorResponse = QLabel('Evaluated object')
buttonHelpGroupBox3 = QPushButton('help')
buttonHelpGroupBox3.setToolTip('On your left, you see a signal graph. The blue point represents the location of the\n' +
'model object. The other point is the location of the evaluated object. Its color, shown\n' +
'on the chart\'s key, corresponds to the neuron\'s attitude towards the evaluated\n' +
'object.\n\n' +
'Click the graph with the right mouse button to set the model object location. The left\n' +
'mouse button sets the evaluated object. You can also perform dragging to move the\n' +
'objects smoothly.')
buttonHelpGroupBox3.setEnabled(False)
hBoxLayoutGroupBox3 = QHBoxLayout()
hBoxLayoutGroupBox3.addWidget(self.colorResponse)
hBoxLayoutGroupBox3.addWidget(buttonHelpGroupBox3)
vBoxLayoutGroupBox3 = QVBoxLayout()
vBoxLayoutGroupBox3.addWidget(QLabel('Key'))
vBoxLayoutGroupBox3.addWidget(QLabel('Model object'))
vBoxLayoutGroupBox3.addLayout(hBoxLayoutGroupBox3)
groupBox3.setLayout(vBoxLayoutGroupBox3)
self.response = QLabel('0')
hBoxLayoutResponse = QHBoxLayout()
hBoxLayoutResponse.addWidget(QLabel('Neuron\'s response: '))
hBoxLayoutResponse.addWidget(self.response)
vBoxlayout = QVBoxLayout()
vBoxlayout.addWidget(QLabel('The neuron that you will be examining will divide the objects you\n' +
'will show it into the ones that it likes and the ones id dislikes.'))
vBoxlayout.addWidget(groupBox1)
vBoxlayout.addWidget(groupBox2)
vBoxlayout.addLayout(hBoxLayoutResponse)
vBoxlayout.addWidget(groupBox3)
self.figure = plot.figure()
self.canvas = FigureCanvas(self.figure)
self.customePlot()
hBoxLayout = QHBoxLayout()
hBoxLayout.addWidget(self.canvas)
hBoxLayout.addLayout(vBoxlayout)
self.neuron = Neuron(2)
self.evaluatedObject()
self.setLayout(hBoxLayout)
self.setWindowTitle('Single neuron examination with visualization (example 01b)')
self.connect(self.w1, SIGNAL('valueChanged(double)'), self.evaluatedObject)
self.connect(self.w2, SIGNAL('valueChanged(double)'), self.evaluatedObject)
self.connect(self.x1, SIGNAL('valueChanged(double)'), self.evaluatedObject)
self.connect(self.x2, SIGNAL('valueChanged(double)'), self.evaluatedObject)
class Main(plugin.Plugin):
" Main Class "
def initialize(self, *args, **kwargs):
" Init Main Class "
super(Main, self).initialize(*args, **kwargs)
self.scriptPath, self.scriptArgs = "", []
self.profilerPath, self.tempPath = profilerPath, tempPath
self.output = " ERROR: FAIL: No output ! "
self.process = QProcess()
self.process.finished.connect(self.on_process_finished)
self.process.error.connect(self.on_process_error)
self.tabWidget, self.stat = QTabWidget(), QWidget()
self.tabWidget.tabCloseRequested.connect(
lambda: self.tabWidget.setTabPosition(1) if self.tabWidget.
tabPosition() == 0 else self.tabWidget.setTabPosition(0))
self.tabWidget.setStyleSheet('QTabBar{font-weight:bold;}')
self.tabWidget.setMovable(True)
self.tabWidget.setTabsClosable(True)
self.vboxlayout1 = QVBoxLayout(self.stat)
self.hboxlayout1 = QHBoxLayout()
self.filterTableLabel = QLabel("<b>Type to Search : </b>", self.stat)
self.hboxlayout1.addWidget(self.filterTableLabel)
self.filterTableLineEdit = QLineEdit(self.stat)
self.filterTableLineEdit.setPlaceholderText(' Type to Search . . . ')
self.hboxlayout1.addWidget(self.filterTableLineEdit)
self.filterHintTableLabel = QLabel(" ? ", self.stat)
self.hboxlayout1.addWidget(self.filterHintTableLabel)
self.vboxlayout1.addLayout(self.hboxlayout1)
self.tableWidget = QTableWidget(self.stat)
self.tableWidget.setAlternatingRowColors(True)
self.tableWidget.setColumnCount(8)
self.tableWidget.setRowCount(2)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(0, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(1, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(2, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(3, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(4, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(5, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(6, item)
item = QTableWidgetItem()
self.tableWidget.setHorizontalHeaderItem(7, item)
self.tableWidget.itemDoubleClicked.connect(
self.on_tableWidget_itemDoubleClicked)
self.vboxlayout1.addWidget(self.tableWidget)
self.tabWidget.addTab(self.stat, " ? ")
self.source = QWidget()
self.gridlayout = QGridLayout(self.source)
self.scintillaWarningLabel = QLabel(
"QScintilla is not installed!. Falling back to basic text edit!.",
self.source)
self.gridlayout.addWidget(self.scintillaWarningLabel, 1, 0, 1, 2)
self.sourceTreeWidget = QTreeWidget(self.source)
self.sourceTreeWidget.setAlternatingRowColors(True)
self.sourceTreeWidget.itemActivated.connect(
self.on_sourceTreeWidget_itemActivated)
self.sourceTreeWidget.itemClicked.connect(
self.on_sourceTreeWidget_itemClicked)
self.sourceTreeWidget.itemDoubleClicked.connect(
self.on_sourceTreeWidget_itemClicked)
self.gridlayout.addWidget(self.sourceTreeWidget, 0, 0, 1, 1)
self.sourceTextEdit = QTextEdit(self.source)
self.sourceTextEdit.setReadOnly(True)
self.gridlayout.addWidget(self.sourceTextEdit, 0, 1, 1, 1)
self.tabWidget.addTab(self.source, " ? ")
self.result = QWidget()
self.vlayout = QVBoxLayout(self.result)
self.globalStatGroupBox = QGroupBox(self.result)
self.hboxlayout = QHBoxLayout(self.globalStatGroupBox)
self.totalTimeLcdNumber = QLCDNumber(self.globalStatGroupBox)
self.totalTimeLcdNumber.setSegmentStyle(QLCDNumber.Filled)
self.totalTimeLcdNumber.setNumDigits(7)
self.totalTimeLcdNumber.display(1000000)
self.totalTimeLcdNumber.setFrameShape(QFrame.StyledPanel)
self.totalTimeLcdNumber.setSizePolicy(QSizePolicy.Expanding,
QSizePolicy.Expanding)
self.hboxlayout.addWidget(self.totalTimeLcdNumber)
self.tTimeLabel = QLabel("<b>Total Time (Sec)</b>",
self.globalStatGroupBox)
self.tTimeLabel.setSizePolicy(QSizePolicy.Minimum, QSizePolicy.Minimum)
self.hboxlayout.addWidget(self.tTimeLabel)
self.numCallLcdNumber = QLCDNumber(self.globalStatGroupBox)
self.numCallLcdNumber.setNumDigits(7)
self.numCallLcdNumber.display(1000000)
self.numCallLcdNumber.setSegmentStyle(QLCDNumber.Filled)
self.numCallLcdNumber.setFrameShape(QFrame.StyledPanel)
self.numCallLcdNumber.setSizePolicy(QSizePolicy.Expanding,
QSizePolicy.Expanding)
self.hboxlayout.addWidget(self.numCallLcdNumber)
self.numCallLabel = QLabel("<b>Number of calls</b>",
self.globalStatGroupBox)
self.numCallLabel.setSizePolicy(QSizePolicy.Minimum,
QSizePolicy.Minimum)
self.hboxlayout.addWidget(self.numCallLabel)
self.primCallLcdNumber = QLCDNumber(self.globalStatGroupBox)
self.primCallLcdNumber.setSegmentStyle(QLCDNumber.Filled)
self.primCallLcdNumber.setFrameShape(QFrame.StyledPanel)
self.primCallLcdNumber.setNumDigits(7)
self.primCallLcdNumber.display(1000000)
self.primCallLcdNumber.setSizePolicy(QSizePolicy.Expanding,
QSizePolicy.Expanding)
self.hboxlayout.addWidget(self.primCallLcdNumber)
self.primCallLabel = QLabel("<b>Primitive calls (%)</b>",
self.globalStatGroupBox)
self.primCallLabel.setSizePolicy(QSizePolicy.Minimum,
QSizePolicy.Minimum)
self.hboxlayout.addWidget(self.primCallLabel)
self.vlayout.addWidget(self.globalStatGroupBox)
try:
from PyKDE4.kdeui import KRatingWidget
self.rating = KRatingWidget(self.globalStatGroupBox)
self.rating.setToolTip('Profiling Performance Rating')
except ImportError:
pass
self.tabWidget.addTab(self.result, " Get Results ! ")
self.resgraph = QWidget()
self.vlayout2 = QVBoxLayout(self.result)
self.graphz = QGroupBox(self.resgraph)
self.hboxlayout2 = QHBoxLayout(self.graphz)
try:
from PyKDE4.kdeui import KLed
KLed(self.graphz)
except ImportError:
pass
self.hboxlayout2.addWidget(
QLabel('''
Work in Progress :) Not Ready Yet'''))
self.vlayout2.addWidget(self.graphz)
self.tabWidget.addTab(self.resgraph, " Graphs and Charts ")
self.pathz = QWidget()
self.vlayout3 = QVBoxLayout(self.pathz)
self.patz = QGroupBox(self.pathz)
self.hboxlayout3 = QVBoxLayout(self.patz)
self.profilepath = QLineEdit(profilerPath)
self.getprofile = QPushButton(QIcon.fromTheme("document-open"), 'Open')
self.getprofile.setToolTip(
'Dont touch if you dont know what are doing')
self.getprofile.clicked.connect(lambda: self.profilepath.setText(
str(
QFileDialog.getOpenFileName(
self.patz, ' Open the profile.py file ',
path.expanduser("~"), ';;(profile.py)'))))
self.hboxlayout3.addWidget(
QLabel(
'<center><b>Profile.py Python Library Full Path:</b></center>')
)
self.hboxlayout3.addWidget(self.profilepath)
self.hboxlayout3.addWidget(self.getprofile)
self.argGroupBox = QGroupBox(self.pathz)
self.hbxlayout = QHBoxLayout(self.argGroupBox)
self.argLineEdit = QLineEdit(self.argGroupBox)
self.argLineEdit.setToolTip(
'Not touch if you dont know what are doing')
self.argLineEdit.setPlaceholderText(
'Dont touch if you dont know what are doing')
self.hbxlayout.addWidget(
QLabel('<b>Additional Profile Arguments:</b>'))
self.hbxlayout.addWidget(self.argLineEdit)
self.hboxlayout3.addWidget(self.argGroupBox)
self.vlayout3.addWidget(self.patz)
self.tabWidget.addTab(self.pathz, " Paths and Configs ")
self.outp = QWidget()
self.vlayout4 = QVBoxLayout(self.outp)
self.outgro = QGroupBox(self.outp)
self.outgro.setTitle(" MultiProcessing Output Logs ")
self.hboxlayout4 = QVBoxLayout(self.outgro)
self.outputlog = QTextEdit()
self.outputlog.setText('''
I do not fear computers, I fear the lack of them. -Isaac Asimov ''')
self.hboxlayout4.addWidget(self.outputlog)
self.vlayout4.addWidget(self.outgro)
self.tabWidget.addTab(self.outp, " Logs ")
self.actionNew_profiling = QAction(QIcon.fromTheme("document-new"),
'New Profiling', self)
self.actionLoad_profile = QAction(QIcon.fromTheme("document-open"),
'Open Profiling', self)
self.actionClean = QAction(QIcon.fromTheme("edit-clear"), 'Clean',
self)
self.actionClean.triggered.connect(lambda: self.clearContent)
self.actionAbout = QAction(QIcon.fromTheme("help-about"), 'About',
self)
self.actionAbout.triggered.connect(lambda: QMessageBox.about(
self.dock, __doc__, ', '.join(
(__doc__, __license__, __author__, __email__))))
self.actionSave_profile = QAction(QIcon.fromTheme("document-save"),
'Save Profiling', self)
self.actionManual = QAction(QIcon.fromTheme("help-contents"), 'Help',
self)
self.actionManual.triggered.connect(lambda: open_new_tab(
'http://docs.python.org/library/profile.html'))
self.tabWidget.setCurrentIndex(2)
self.globalStatGroupBox.setTitle("Global Statistics")
item = self.tableWidget.horizontalHeaderItem(0)
item.setText("Number of Calls")
item = self.tableWidget.horizontalHeaderItem(1)
item.setText("Total Time")
item = self.tableWidget.horizontalHeaderItem(2)
item.setText("Per Call")
item = self.tableWidget.horizontalHeaderItem(3)
item.setText("Cumulative Time")
item = self.tableWidget.horizontalHeaderItem(4)
item.setText("Per Call")
item = self.tableWidget.horizontalHeaderItem(5)
item.setText("Filename")
item = self.tableWidget.horizontalHeaderItem(6)
item.setText("Line")
item = self.tableWidget.horizontalHeaderItem(7)
item.setText("Function")
self.tabWidget.setTabText(self.tabWidget.indexOf(self.stat),
"Statistics per Function")
self.sourceTreeWidget.headerItem().setText(0, "Source files")
self.tabWidget.setTabText(self.tabWidget.indexOf(self.source),
"Sources Navigator")
#######################################################################
self.scrollable, self.dock = QScrollArea(), QDockWidget()
self.scrollable.setWidgetResizable(True)
self.scrollable.setWidget(self.tabWidget)
self.dock.setWindowTitle(__doc__)
self.dock.setStyleSheet('QDockWidget::title{text-align: center;}')
self.dock.setWidget(self.scrollable)
QToolBar(self.dock).addActions(
(self.actionNew_profiling, self.actionClean,
self.actionSave_profile, self.actionLoad_profile,
self.actionManual, self.actionAbout))
self.actionNew_profiling.triggered.connect(
self.on_actionNew_profiling_triggered)
self.actionLoad_profile.triggered.connect(
self.on_actionLoad_profile_triggered)
self.actionSave_profile.triggered.connect(
self.on_actionSave_profile_triggered)
self.locator.get_service('misc').add_widget(
self.dock, QIcon.fromTheme("document-open-recent"), __doc__)
if QSCI:
# Scintilla source editor management
self.scintillaWarningLabel.setText(' QScintilla is Ready ! ')
layout = self.source.layout()
layout.removeWidget(self.sourceTextEdit)
self.sourceTextEdit = Qsci.QsciScintilla(self.source)
layout.addWidget(self.sourceTextEdit, 0, 1)
doc = self.sourceTextEdit
doc.setLexer(Qsci.QsciLexerPython(self.sourceTextEdit))
doc.setReadOnly(True)
doc.setEdgeMode(Qsci.QsciScintilla.EdgeLine)
doc.setEdgeColumn(80)
doc.setEdgeColor(QColor("#FF0000"))
doc.setFolding(Qsci.QsciScintilla.BoxedTreeFoldStyle)
doc.setBraceMatching(Qsci.QsciScintilla.SloppyBraceMatch)
doc.setCaretLineVisible(True)
doc.setMarginLineNumbers(1, True)
doc.setMarginWidth(1, 25)
doc.setTabWidth(4)
doc.setEolMode(Qsci.QsciScintilla.EolUnix)
self.marker = {}
for color in COLORS:
mnr = doc.markerDefine(Qsci.QsciScintilla.Background)
doc.setMarkerBackgroundColor(color, mnr)
self.marker[color] = mnr
self.currentSourcePath = None
# Connect table and tree filter edit signal to unique slot
self.filterTableLineEdit.textEdited.connect(
self.on_filterLineEdit_textEdited)
# Timer to display filter hint message
self.filterHintTimer = QTimer(self)
self.filterHintTimer.setSingleShot(True)
self.filterHintTimer.timeout.connect(self.on_filterHintTimer_timeout)
# Timer to start search
self.filterSearchTimer = QTimer(self)
self.filterSearchTimer.setSingleShot(True)
self.filterSearchTimer.timeout.connect(
self.on_filterSearchTimer_timeout)
self.tabLoaded = {}
for i in range(10):
self.tabLoaded[i] = False
self.backgroundTreeMatchedItems = {}
self.resizeWidgetToContent(self.tableWidget)
def on_actionNew_profiling_triggered(self):
self.clearContent()
self.scriptPath = str(
QFileDialog.getOpenFileName(self.dock,
"Choose your script to profile",
path.expanduser("~"),
"Python (*.py *.pyw)"))
commandLine = [
self.profilerPath, "-o", self.tempPath, self.scriptPath
] + self.scriptArgs
commandLine = " ".join(commandLine)
##if self.termCheckBox.checkState() == Qt.Checked:
#termList = ["xterm", "aterm"]
#for term in termList:
#termPath = which(term)
#if termPath:
#break
#commandLine = """%s -e "%s ; echo 'Press ENTER Exit' ; read" """ \
#% (termPath, commandLine)
self.process.start(commandLine)
if not self.process.waitForStarted():
print((" ERROR: {} failed!".format(commandLine)))
return
def on_process_finished(self, exitStatus):
' whan the process end '
print((" INFO: OK: QProcess is %s" % self.process.exitCode()))
self.output = self.process.readAll().data()
if not self.output:
self.output = " ERROR: FAIL: No output ! "
self.outputlog.setText(self.output + str(self.process.exitCode()))
if path.exists(self.tempPath):
self.setStat(self.tempPath)
remove(self.tempPath)
else:
self.outputlog.setText(" ERROR: QProcess FAIL: Profiling failed.")
self.tabWidget.setCurrentIndex(2)
def on_process_error(self, error):
' when the process fail, I hope you never see this '
print(" ERROR: QProcess FAIL: Profiler Dead, wheres your God now ? ")
if error == QProcess.FailedToStart:
self.outputlog.setText(" ERROR: FAIL: Profiler execution failed ")
elif error == QProcess.Crashed:
self.outputlog.setText(" ERROR: FAIL: Profiler execution crashed ")
else:
self.outputlog.setText(" ERROR: FAIL: Profiler unknown error ")
def on_actionLoad_profile_triggered(self):
"""Load a previous profile sessions"""
statPath = str(
QFileDialog.getOpenFileName(self.dock, "Open profile dump",
path.expanduser("~"),
"Profile file (*)"))
if statPath:
self.clearContent()
print(' INFO: OK: Loading profiling from ' + statPath)
self.setStat(statPath)
def on_actionSave_profile_triggered(self):
"""Save a profile sessions"""
statPath = str(
QFileDialog.getSaveFileName(self.dock, "Save profile dump",
path.expanduser("~"),
"Profile file (*)"))
if statPath:
#TODO: handle error case and give feelback to user
print(' INFO: OK: Saving profiling to ' + statPath)
self.stat.save(statPath)
#=======================================================================#
# Common parts #
#=======================================================================#
def on_tabWidget_currentChanged(self, index):
"""slot for tab change"""
# Kill search and hint timer if running to avoid cross effect
for timer in (self.filterHintTimer, self.filterSearchTimer):
if timer.isActive():
timer.stop()
if not self.stat:
#No stat loaded, nothing to do
return
self.populateTable()
self.populateSource()
def on_filterLineEdit_textEdited(self, text):
"""slot for filter change (table or tree"""
if self.filterSearchTimer.isActive():
# Already runnning, stop it
self.filterSearchTimer.stop()
# Start timer
self.filterSearchTimer.start(300)
def on_filterHintTimer_timeout(self):
"""Timeout to warn user about text length"""
print("timeout")
tab = self.tabWidget.currentIndex()
if tab == TAB_FUNCTIONSTAT:
label = self.filterHintTableLabel
label.setText("Type > 2 characters to search")
def on_filterSearchTimer_timeout(self):
"""timeout to start search"""
tab = self.tabWidget.currentIndex()
if tab == TAB_FUNCTIONSTAT:
text = self.filterTableLineEdit.text()
label = self.filterHintTableLabel
edit = self.filterTableLineEdit
widget = self.tableWidget
else:
print("Unknow tab for filterSearch timeout !")
print(("do search for %s" % text))
if not len(text):
# Empty keyword, just clean all
if self.filterHintTimer.isActive():
self.filterHintTimer.stop()
label.setText(" ? ")
self.warnUSer(True, edit)
self.clearSearch()
return
if len(text) < 2:
# Don't filter if text is too short and tell it to user
self.filterHintTimer.start(600)
return
else:
if self.filterHintTimer.isActive():
self.filterHintTimer.stop()
label.setText(" ? ")
# Search
self.clearSearch()
matchedItems = []
if tab == TAB_FUNCTIONSTAT:
# Find items
matchedItems = widget.findItems(text, Qt.MatchContains)
widget.setSortingEnabled(False)
matchedRows = [item.row() for item in matchedItems]
# Hide matched items
header = widget.verticalHeader()
for row in range(widget.rowCount()):
if row not in matchedRows:
header.hideSection(row)
widget.setSortingEnabled(True)
else:
print(" Unknow tab for filterSearch timeout ! ")
print(("got %s members" % len(matchedItems)))
self.warnUSer(matchedItems, edit)
self.resizeWidgetToContent(widget)
def resizeWidgetToContent(self, widget):
"""Resize all columns according to content"""
for i in range(widget.columnCount()):
widget.resizeColumnToContents(i)
def clearSearch(self):
"""Clean search result
For table, show all items
For tree, remove colored items"""
tab = self.tabWidget.currentIndex()
if tab == TAB_FUNCTIONSTAT:
header = self.tableWidget.verticalHeader()
if header.hiddenSectionCount():
for i in range(header.count()):
if header.isSectionHidden(i):
header.showSection(i)
def clearContent(self):
# Clear tabs
self.tableWidget.clearContents()
self.sourceTreeWidget.clear()
# Reset LCD numbers
for lcdNumber in (self.totalTimeLcdNumber, self.numCallLcdNumber,
self.primCallLcdNumber):
lcdNumber.display(1000000)
# Reset stat
self.pstat = None
# Disable save as menu
self.actionSave_profile.setEnabled(False)
# Mark all tabs as unloaded
for i in range(10):
self.tabLoaded[i] = False
def warnUSer(self, result, inputWidget):
palette = inputWidget.palette()
if result:
palette.setColor(QPalette.Normal, QPalette.Base,
QColor(255, 255, 255))
else:
palette.setColor(QPalette.Normal, QPalette.Base,
QColor(255, 136, 138))
inputWidget.setPalette(palette)
inputWidget.update()
def setStat(self, statPath):
self.stat = Stat(path=statPath)
# Global stat update
self.totalTimeLcdNumber.display(self.stat.getTotalTime())
self.numCallLcdNumber.display(self.stat.getCallNumber())
self.primCallLcdNumber.display(self.stat.getPrimitiveCallRatio())
# Refresh current tab
self.on_tabWidget_currentChanged(self.tabWidget.currentIndex())
# Activate save as menu
self.actionSave_profile.setEnabled(True)
try:
self.rating.setMaxRating(10)
self.rating.setRating(
int(self.stat.getPrimitiveCallRatio()) / 10 - 1)
except:
pass
#========================================================================#
# Statistics table #
#=======================================================================#
def populateTable(self):
row = 0
rowCount = self.stat.getStatNumber()
progress = QProgressDialog("Populating statistics table...", "Abort",
0, 2 * rowCount)
self.tableWidget.setSortingEnabled(False)
self.tableWidget.setRowCount(rowCount)
progress.setWindowModality(Qt.WindowModal)
for (key, value) in self.stat.getStatItems():
#ncalls
item = StatTableWidgetItem(str(value[0]))
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_NCALLS, item)
colorTableItem(item, self.stat.getCallNumber(), value[0])
#total time
item = StatTableWidgetItem(str(value[2]))
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_TTIME, item)
colorTableItem(item, self.stat.getTotalTime(), value[2])
#per call (total time)
if value[0] != 0:
tPerCall = str(value[2] / value[0])
cPerCall = str(value[3] / value[0])
else:
tPerCall = ""
cPerCall = ""
item = StatTableWidgetItem(tPerCall)
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_TPERCALL, item)
colorTableItem(
item,
100.0 * self.stat.getTotalTime() / self.stat.getCallNumber(),
tPerCall)
#per call (cumulative time)
item = StatTableWidgetItem(cPerCall)
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_CPERCALL, item)
colorTableItem(
item,
100.0 * self.stat.getTotalTime() / self.stat.getCallNumber(),
cPerCall)
#cumulative time
item = StatTableWidgetItem(str(value[3]))
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_CTIME, item)
colorTableItem(item, self.stat.getTotalTime(), value[3])
#Filename
self.tableWidget.setItem(row, STAT_FILENAME,
StatTableWidgetItem(str(key[0])))
#Line
item = StatTableWidgetItem(str(key[1]))
item.setTextAlignment(Qt.AlignRight)
self.tableWidget.setItem(row, STAT_LINE, item)
#Function name
self.tableWidget.setItem(row, STAT_FUNCTION,
StatTableWidgetItem(str(key[2])))
row += 1
# Store it in stat hash array
self.stat.setStatLink(item, key, TAB_FUNCTIONSTAT)
progress.setValue(row)
if progress.wasCanceled():
return
for i in range(self.tableWidget.rowCount()):
progress.setValue(row + i)
for j in range(self.tableWidget.columnCount()):
item = self.tableWidget.item(i, j)
if item:
item.setFlags(Qt.ItemIsEnabled)
self.tableWidget.setSortingEnabled(True)
self.resizeWidgetToContent(self.tableWidget)
progress.setValue(2 * rowCount)
def on_tableWidget_itemDoubleClicked(self, item):
matchedItems = []
filename = str(self.tableWidget.item(item.row(), STAT_FILENAME).text())
if not filename or filename.startswith("<"):
# No source code associated, return immediatly
return
function = self.tableWidget.item(item.row(), STAT_FUNCTION).text()
line = self.tableWidget.item(item.row(), STAT_LINE).text()
self.on_tabWidget_currentChanged(TAB_SOURCE) # load source tab
function = "%s (%s)" % (function, line)
fathers = self.sourceTreeWidget.findItems(filename, Qt.MatchContains,
SOURCE_FILENAME)
print(("find %s father" % len(fathers)))
for father in fathers:
findItems(father, function, SOURCE_FILENAME, matchedItems)
print(("find %s items" % len(matchedItems)))
if matchedItems:
self.tabWidget.setCurrentIndex(TAB_SOURCE)
self.sourceTreeWidget.scrollToItem(matchedItems[0])
self.on_sourceTreeWidget_itemClicked(matchedItems[0],
SOURCE_FILENAME)
matchedItems[0].setSelected(True)
else:
print("oups, item found but cannot scroll to it !")
#=======================================================================#
# Source explorer #
#=====================================================================#
def populateSource(self):
items = {}
for stat in self.stat.getStatKeys():
source = stat[0]
function = "%s (%s)" % (stat[2], stat[1])
if source in ("", "profile") or source.startswith("<"):
continue
# Create the function child
child = QTreeWidgetItem([function])
# Store it in stat hash array
self.stat.setStatLink(child, stat, TAB_SOURCE)
if source in items:
father = items[source]
else:
# Create the father
father = QTreeWidgetItem([source])
items[source] = father
father.addChild(child)
self.sourceTreeWidget.setSortingEnabled(False)
for value in list(items.values()):
self.sourceTreeWidget.addTopLevelItem(value)
self.sourceTreeWidget.setSortingEnabled(True)
def on_sourceTreeWidget_itemActivated(self, item, column):
self.on_sourceTreeWidget_itemClicked(item, column)
def on_sourceTreeWidget_itemClicked(self, item, column):
line = 0
parent = item.parent()
if QSCI:
doc = self.sourceTextEdit
if parent:
pathz = parent.text(column)
result = match("(.*) \(([0-9]+)\)", item.text(column))
if result:
try:
function = str(result.group(1))
line = int(result.group(2))
except ValueError:
# We got garbage... falling back to line 0
pass
else:
pathz = item.text(column)
pathz = path.abspath(str(pathz))
if self.currentSourcePath != pathz:
# Need to load source
self.currentSourcePath == pathz
try:
if QSCI:
doc.clear()
doc.insert(file(pathz).read())
else:
self.sourceTextEdit.setPlainText(file(pathz).read())
except IOError:
QMessageBox.warning(self, "Error",
"Source file could not be found",
QMessageBox.Ok)
return
if QSCI:
for function, line in [(i[2], i[1])
for i in self.stat.getStatKeys()
if i[0] == pathz]:
# expr, regexp, case sensitive, whole word, wrap, forward
doc.findFirst("def", False, True, True, False, True, line,
0, True)
end, foo = doc.getCursorPosition()
time = self.stat.getStatTotalTime((pathz, line, function))
colorSource(doc, self.stat.getTotalTime(), time, line, end,
self.marker)
if QSCI:
doc.ensureLineVisible(line)
class previewDlg(QMainWindow):
'''
classdocs
'''
def __init__(self, parent, comp, basePMCheck, model):
'''
Constructor
'''
QMainWindow.__init__(self, parent)
self.basePMCheck = basePMCheck
# self.ui = Ui_Previewself.grbPageProperty()
# self.ui.setupUi(self)
self.resize(1000, 700)
self.setWindowTitle("Preview Dialog")
self.view = QgsComposerView(self)
viewLayout = QGridLayout()
viewLayout.setSpacing(0)
viewLayout.setMargin(0)
mHorizontalRuler = QgsComposerRuler(QgsComposerRuler.Horizontal)
mVerticalRuler = QgsComposerRuler(QgsComposerRuler.Vertical)
mRulerLayoutFix = QWidget()
mRulerLayoutFix.setAttribute(Qt.WA_NoMousePropagation)
mRulerLayoutFix.setBackgroundRole(QPalette.Window)
mRulerLayoutFix.setFixedSize(mVerticalRuler.rulerSize(),
mHorizontalRuler.rulerSize())
viewLayout.addWidget(mRulerLayoutFix, 0, 0)
viewLayout.addWidget(mHorizontalRuler, 0, 1)
viewLayout.addWidget(mVerticalRuler, 1, 0)
self.view.setContentsMargins(0, 0, 0, 0)
self.view.setHorizontalRuler(mHorizontalRuler)
self.view.setVerticalRuler(mVerticalRuler)
viewLayout.addWidget(self.view, 1, 1)
# self.scene = comp
self.view.setZoomLevel(1.0)
self.view.setComposition(comp)
self.scene = self.view.composition()
layout = QVBoxLayout()
hLayout = QHBoxLayout()
hLayout.addLayout(viewLayout)
self.mapItem = self.scene.getComposerMapById(0)
self.view.scale(2.8, 2.8)
self.view.setPreviewModeEnabled(True)
self.toolBarAction = self.addToolBar("composer action")
self.actionMapRefresh = QAction(self)
self.actionMapRefresh.setObjectName("actionMapRefresh")
icon3 = QIcon("Resource/Refresh.png")
self.actionMapRefresh.setIcon(icon3)
self.actionMapRefresh.setToolTip("Refresh")
# self.textItemAction.setCheckable(True)
self.connect(self.actionMapRefresh, SIGNAL("triggered()"),
self.actionMapRefresh_triggered)
self.toolBarAction.addAction(self.actionMapRefresh)
# # self.templeteCreateAction = QAction(self)
# # self.templeteCreateAction.setObjectName("createTempleteAction")
# # icon4 = QIcon("Resource\\templetepointer.png")
# # self.templeteCreateAction.setIcon(icon4)
# # self.templeteCreateAction.setToolTip("Create Templete")
# # self.templeteCreateAction.setCheckable(True)
# # self.connect(self.templeteCreateAction, SIGNAL("triggered()"), self.createTempleteAction)
# # self.toolBar.addAction(self.templeteCreateAction)
# layout.insertWidget(0, self.toolBar)
# self.scene.selectedItemChanged.connect(self.selectedItemDisplay)
self.view.selectedItemChanged.connect(self.selectedItemDisplay)
self.view.cursorPosChanged.connect(self.cursorPosChangedEvent)
# self.connect(self.view, SIGNAL("selectedItemChanged(QgsComposerItem)"),self, SLOT("selectedItemDisplay(QgsComposerItem)"))
# self.scene.composerLabelAdded.connect(self.composerLabelAddedEvent)
self.view.itemRemoved.connect(self.deleteItem)
# self.connect( self.view, SIGNAL( "actionFinished()" ), self.setSelectionTool)
#listen out for position updates from the QgsComposerView
self.propertyWidget = QWidget(self)
hLayout.addWidget(self.propertyWidget)
self.propertyWidget.setObjectName("propertyWidget")
self.propertyWidget.resize(222, 302)
self.vLayout_3 = QVBoxLayout(self.propertyWidget)
self.vLayout_3.setObjectName("vLayout_3")
self.groupBox = QGroupBox(self.propertyWidget)
self.groupBox.setObjectName("groupBox")
self.horizontalLayout_2 = QHBoxLayout(self.groupBox)
self.horizontalLayout_2.setObjectName("horizontalLayout_2")
self.frame = QFrame(self.groupBox)
self.frame.setFrameShape(QFrame.StyledPanel)
self.frame.setFrameShadow(QFrame.Raised)
self.frame.setObjectName("frame")
self.verticalLayout = QVBoxLayout(self.frame)
self.verticalLayout.setObjectName("verticalLayout")
self.label = QLabel(self.frame)
self.label.setObjectName("label")
self.verticalLayout.addWidget(self.label)
self.labelText = QPlainTextEdit(self.frame)
self.labelText.setObjectName("labelText")
self.verticalLayout.addWidget(self.labelText)
self.btnLabelFont = QPushButton(self.frame)
self.btnLabelFont.setObjectName("btnLabelFont")
self.verticalLayout.addWidget(self.btnLabelFont)
self.btnLabelColor = QPushButton(self.frame)
self.btnLabelColor.setObjectName("btnLabelColor")
self.verticalLayout.addWidget(self.btnLabelColor)
self.frame_2 = QFrame(self.frame)
self.frame_2.setFrameShape(QFrame.StyledPanel)
self.frame_2.setFrameShadow(QFrame.Raised)
self.frame_2.setObjectName("frame_2")
self.horizontalLayout = QHBoxLayout(self.frame_2)
self.horizontalLayout.setObjectName("horizontalLayout")
self.label_2 = QLabel(self.frame_2)
self.label_2.setObjectName("label_2")
self.horizontalLayout.addWidget(self.label_2)
self.spinLabelRotation = QSpinBox(self.frame_2)
self.spinLabelRotation.setObjectName("spinLabelRotation")
self.spinLabelRotation.setMinimum(-360)
self.spinLabelRotation.setMaximum(360)
self.horizontalLayout.addWidget(self.spinLabelRotation)
self.verticalLayout.addWidget(self.frame_2)
self.chbBackgroundEnable = QCheckBox(self.frame)
self.chbBackgroundEnable.setChecked(True)
self.chbBackgroundEnable.setObjectName("chbBackgroundEnable")
self.verticalLayout.addWidget(self.chbBackgroundEnable)
self.horizontalLayout_2.addWidget(self.frame)
self.vLayout_3.addWidget(self.groupBox)
self.resolutionFrame = QFrame(self.frame)
self.resolutionFrame.setFrameShape(QFrame.StyledPanel)
self.resolutionFrame.setFrameShadow(QFrame.Raised)
self.resolutionFrame.setObjectName("resolutionFrame")
self.horizontalLayout4 = QHBoxLayout(self.resolutionFrame)
self.horizontalLayout4.setObjectName("horizontalLayout4")
self.label_resolution = QLabel(self.resolutionFrame)
self.label_resolution.setObjectName("label_resolution")
self.label_resolution.setText("Print Resolution (dpi):")
self.horizontalLayout4.addWidget(self.label_resolution)
self.spinResolution = QSpinBox(self.resolutionFrame)
self.spinResolution.setObjectName("spinResolution")
self.spinResolution.setMinimum(0)
self.spinResolution.setMaximum(1000)
self.spinResolution.setValue(300)
self.horizontalLayout4.addWidget(self.spinResolution)
# self.verticalLayout.addWidget(self.frame_2)
self.vLayout_3.addWidget(self.resolutionFrame)
self.gbTable = GroupBox(self.propertyWidget)
self.gbTable.Caption = "Table"
self.vLayout_3.addWidget(self.gbTable)
self.mTableView = QTableView(self.gbTable)
self.gbTable.Add = self.mTableView
hHeder = self.mTableView.horizontalHeader()
hHeder.setVisible(False)
vHeder = self.mTableView.verticalHeader()
vHeder.setVisible(False)
# self.mTableView.setFixedHeight(70)
# self.mTableView.setFixedWidth(comp.paperWidth() - 40)
# self.stdItemModel = QStandardItemModel()
# self.
self.spaceItem = QSpacerItem(20, 40, QSizePolicy.Minimum,
QSizePolicy.Expanding)
self.vLayout_3.addItem(self.spaceItem)
self.groupBox.setTitle("Label Property")
self.label.setText("Label Text:")
self.btnLabelFont.setText("Label Font")
self.btnLabelColor.setText("Label Color")
self.label_2.setText("Label Rotation:")
self.chbBackgroundEnable.setText("Background Enable")
self.groupBox.setEnabled(False)
self.connect(self.btnLabelFont, SIGNAL("clicked()"),
self.btnLabelFontClick)
self.connect(self.btnLabelColor, SIGNAL("clicked()"),
self.btnLabelColorClick)
self.connect(self.chbBackgroundEnable, SIGNAL("clicked()"),
self.chbBackgroundEnableClick)
self.labelText.textChanged.connect(self.labelTextChanged)
self.spinLabelRotation.valueChanged.connect(
self.spinLabelRotationValueChanged)
layout.addLayout(hLayout)
#
self.btnBack = QPushButton()
self.btnBack.setText("back")
footerLayout = QHBoxLayout()
footerLayout.addWidget(self.btnBack)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel
| QDialogButtonBox.Ok)
self.buttonBox.setObjectName("buttonBox")
footerLayout.addWidget(self.buttonBox)
layout.addLayout(footerLayout)
self.setLayout(layout)
deleteItemKey = QShortcut(QKeySequence(Qt.Key_Delete), self)
deleteItemKey.activated.connect(self.deleteItem)
# self.btnBack.clicked.connect(self.back)
self.connect(self.buttonBox, SIGNAL("accepted()"), self.acceptMethod)
self.connect(self.buttonBox, SIGNAL("rejected()"), self.reject)
self.btnCancel = self.buttonBox.button(QDialogButtonBox.Cancel)
self.view.setCurrentTool(QgsComposerView.Select)
self.btnLabelColor.setVisible(False)
# self.btnBack.setVisible(False)
self.chbBackgroundEnable.setVisible(False)
# self.view.emit(SIGNAL("actionFinished"))
# if self.scene.plotStyle() != QgsComposition.Preview:
# self.scene.setPlotStyle(QgsComposition.Preview)
# self.mapItem.setPreviewMode(QgsComposerMap.Render)
# self.mapItem.updateCachedImage()
# self.mapItem.setSelected(True)
self.mComposition = comp
self.composerMapItem = self.mComposition.composerMapItems()[0]
self.composerMapItem.setUpdatesEnabled(True)
self.mStdModel = model
self.mTableView.setModel(self.mStdModel)
self.mTableView.setSpan(0, 0, 1, 6)
self.mTableView.setSpan(1, 0, 1, 2)
self.mTableView.setSpan(2, 0, 2, 1)
self.mTableView.setSpan(4, 0, 1, 2)
self.mTableView.setSpan(5, 0, 1, 2)
self.mTableView.setSpan(6, 0, 1, 2)
self.mTableView.setSpan(0, 6, 1, 8)
self.mTableView.setSpan(1, 7, 1, 4)
self.mTableView.setSpan(1, 11, 1, 3)
self.mTableView.setSpan(2, 7, 1, 4)
self.mTableView.setSpan(2, 11, 1, 3)
def acceptMethod(self):
# self.mStdModel.setItem(0, QStandardItem("nnnnnnnn"))
filePath = QFileDialog.getSaveFileName(
self, "Save PDF File", QCoreApplication.applicationDirPath(),
"pdf files(*.pdf )")
if filePath == "":
return
self.mComposition.clearSelection()
self.mComposition.setPrintResolution(self.spinResolution.value())
resultPdf = self.mComposition.exportAsPDF(filePath)
if resultPdf:
message = QMessageBox.information(self, "Result",
"Successful export PDF")
else:
message = QMessageBox.information(self, "Result",
"Don't export PDF")
def rePresent(self, comp, model):
self.mComposition = comp
self.mStdModel = model
self.view.setComposition(comp)
self.scene = self.view.composition()
def back(self):
self.done(2)
def spinLabelRotationValueChanged(self, rotationValue):
self.selectedLabelItem.setItemRotation(rotationValue)
def cursorPosChangedEvent(self, scenePointF):
self.scenePoint = scenePointF
# i = 100
def labelTextChanged(self):
self.selectedLabelItem.beginCommand(
"Label text changed", QgsComposerMergeCommand.ComposerLabelSetText)
self.selectedLabelItem.blockSignals(True)
self.selectedLabelItem.setText(self.labelText.toPlainText())
self.selectedLabelItem.update()
self.selectedLabelItem.blockSignals(False)
self.selectedLabelItem.endCommand()
def chbBackgroundEnableClick(self):
if self.chbBackgroundEnable.isChecked():
self.selectedLabelItem.setBackgroundEnabled(True)
self.mapItem.updateCachedImage()
else:
self.selectedLabelItem.setBackgroundEnabled(False)
self.mapItem.updateCachedImage()
def btnLabelFontClick(self):
dlgFont = QFontDialog(self)
dlgFont.setCurrentFont(self.selectedLabelItem.font())
result = dlgFont.exec_()
if result == 1:
self.labelFont = dlgFont.selectedFont()
else:
self.labelFont = QFont()
self.selectedLabelItem.setFont(self.labelFont)
def btnLabelColorClick(self):
dlgColor = QColorDialog(self)
dlgColor.setCurrentColor(self.selectedLabelItem.fontColor())
result = dlgColor.exec_()
if result == 1:
self.labelColor = dlgColor.selectedColor()
self.selectedLabelItem.setFontColor(self.labelColor)
def createTempleteAction(self):
if self.templeteCreateAction.isChecked() and self.basePMCheck:
font = QFont("Arial", 13)
font.setItalic(True)
self.compLabel1 = QgsComposerLabel(self.scene)
self.compLabel1.setFont(font)
self.compLabel1.setText("South China Sea")
self.compLabel1.setBackgroundEnabled(False)
self.compLabel1.setItemPosition(156, 100)
self.compLabel1.adjustSizeToText()
self.compLabel1.setItemRotation(60)
# mapitem = self.scene.composerMapItems()
# mapitem[0].addItem(self.compLabel1)
self.scene.addItem(self.compLabel1)
self.compLabel2 = QgsComposerLabel(self.scene)
self.compLabel2.setFont(font)
self.compLabel2.setText("Straits Of Malacca")
self.compLabel2.setBackgroundEnabled(False)
self.compLabel2.setItemPosition(35, 100)
self.compLabel2.adjustSizeToText()
self.compLabel2.setItemRotation(60)
self.scene.addItem(self.compLabel2)
font.setItalic(False)
self.compLabel3 = QgsComposerLabel(self.scene)
self.compLabel3.setFont(font)
self.compLabel3.setBackgroundEnabled(False)
self.compLabel3.setText("THAILAND")
self.compLabel3.setItemPosition(68, 60)
self.compLabel3.adjustSizeToText()
# self.compLabel3.setItemRotation(0.5)
self.scene.addItem(self.compLabel3)
# self.templeteCreateAction.setChecked(False)
self.compLabel4 = QgsComposerLabel(self.scene)
self.compLabel4.setFont(font)
self.compLabel4.setBackgroundEnabled(False)
self.compLabel4.setText("SINGAPORE")
self.compLabel4.setItemPosition(141, 218)
self.compLabel4.adjustSizeToText()
# self.compLabel3.setItemRotation(0.5)
self.scene.addItem(self.compLabel4)
self.templeteCreateAction.setChecked(False)
self.compLabel4.setSelected(True)
elif self.templeteCreateAction.isChecked(
) and self.basePMCheck == False:
font = QFont("Arial", 14)
font.setItalic(True)
self.compLabel5 = QgsComposerLabel(self.scene)
self.compLabel5.setFont(font)
self.compLabel5.setText("South China Sea")
self.compLabel5.setBackgroundEnabled(False)
self.compLabel5.setItemPosition(108, 86)
self.compLabel5.adjustSizeToText()
self.compLabel5.setItemRotation(-45)
# mapitem = self.scene.composerMapItems()
# mapitem[0].addItem(self.compLabel1)
self.scene.addItem(self.compLabel5)
self.compLabel6 = QgsComposerLabel(self.scene)
self.compLabel6.setFont(font)
self.compLabel6.setText("Sulu Sea")
self.compLabel6.setBackgroundEnabled(False)
self.compLabel6.setItemPosition(236, 38)
self.compLabel6.adjustSizeToText()
self.compLabel6.setItemRotation(45)
self.scene.addItem(self.compLabel6)
font.setItalic(False)
self.compLabel7 = QgsComposerLabel(self.scene)
self.compLabel7.setFont(font)
self.compLabel7.setBackgroundEnabled(False)
self.compLabel7.setText("Celebes Sea")
self.compLabel7.setItemPosition(242, 112)
self.compLabel7.adjustSizeToText()
self.compLabel7.setItemRotation(-45)
# self.compLabel3.setItemRotation(0.5)
self.scene.addItem(self.compLabel7)
# self.templeteCreateAction.setChecked(False)
self.compLabel8 = QgsComposerLabel(self.scene)
self.compLabel8.setFont(font)
self.compLabel8.setBackgroundEnabled(False)
self.compLabel8.setText("INDONESIA\n(Kalimantan)")
self.compLabel8.setItemPosition(172, 148, 32, 16)
# self.compLabel8.setHAlign(Qt.AlignHCenter)
# self.compLabel8.setVAlign(Qt.AlignVCenter)
# self.compLabel8.setFrameEnabled(False)
# self.compLabel8.setItemPosition()
# self.compLabel8.adjustSizeToText()
# self.compLabl3.setItemRotation(0.5)
self.scene.addItem(self.compLabel8)
self.compLabel9 = QgsComposerLabel(self.scene)
self.compLabel9.setFont(font)
self.compLabel9.setBackgroundEnabled(False)
self.compLabel9.setText("BRUNEI")
self.compLabel9.setItemPosition(136, 83)
self.compLabel9.adjustSizeToText()
# self.compLabl3.setItemRotation(0.5)
self.scene.addItem(self.compLabel9)
self.templeteCreateAction.setChecked(False)
pass
def actionMapRefresh_triggered(self):
self.view.setCurrentTool(QgsComposerView.AddRectangle)
def setSelectionTool(self):
self.view.deleteSelectedItems()
font = QFont("Arial", 14)
newLabelItem = QgsComposerLabel(self.scene)
newLabelItem.setText("QGIS")
newLabelItem.setFont(font)
newLabelItem.setItemPosition(self.scenePoint.x(), self.scenePoint.y())
newLabelItem.adjustSizeToText()
self.scene.addItem(newLabelItem)
# selectItemPoint = self.scene.composerItemAt(self.scenePoint)
newLabelItem.setSelected(True)
self.groupBox.setEnabled(True)
self.selectedLabelItem = newLabelItem
# txt = self.selectedLabelItem.text()
# textDoc = QTextDocument(txt)
self.labelText.setPlainText(self.selectedLabelItem.text())
# self.scene.setSelectedItem(self.newLabelItem)
self.view.setCurrentTool(QgsComposerView.Select)
# self.selectedLabelItem = self.view.currentTool()
self.textItemAction.setChecked(False)
def selectedItemDisplay(self, item):
if self.scene.plotStyle() != QgsComposition.Preview:
self.scene.setPlotStyle(QgsComposition.Preview)
self.mapItem.setPreviewMode(QgsComposerMap.Render)
self.mapItem.updateCachedImage()
item._class_ = QgsComposerLabel
# selectedItems = self.scene.selectedComposerItems(True)
# if isinstance(item, QgsComposerItem):
# self.selectedLabelItem = item
# if isinstance(item, QGraphicsRectItem):
# self.selectedLabelItem = item
if isinstance(item, QgsComposerLabel):
self.selectedLabelItem = item
self.groupBox.setEnabled(True)
self.labelText.setPlainText(self.selectedLabelItem.text())
self.spinLabelRotation.setValue(self.selectedLabelItem.rotation())
else:
self.groupBox.setEnabled(False)
# print "debug"
itemName = self.view.currentTool()
if itemName == 5:
item.setText("label")
pass
def deleteItem(self):
self.view.deleteSelectedItems()
def __createLayout(self):
" Creates the dialog layout "
self.resize(640, 480)
self.setSizeGripEnabled(True)
vboxLayout = QVBoxLayout(self)
# Revisions to compare
compareGroupbox = QGroupBox(self)
compareGroupbox.setTitle("Revisions to compare")
sizePolicy = QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
compareGroupbox.sizePolicy().hasHeightForWidth())
compareGroupbox.setSizePolicy(sizePolicy)
revisionLayout = QHBoxLayout(compareGroupbox)
self.__lhsRevisionLabel = QLabel()
self.__lhsRevisionLabel.setFrameStyle(QFrame.StyledPanel)
self.__lhsResetButton = QToolButton()
self.__lhsResetButton.setIcon(PixmapCache().getIcon(pluginHomeDir +
'svnclearrev.png'))
self.__lhsResetButton.setFocusPolicy(Qt.NoFocus)
self.__lhsResetButton.setEnabled(False)
self.__lhsResetButton.setToolTip("Reset revision to compare")
self.__lhsResetButton.clicked.connect(self.__onLHSReset)
self.__rhsRevisionLabel = QLabel()
self.__rhsRevisionLabel.setFrameStyle(QFrame.StyledPanel)
self.__rhsResetButton = QToolButton()
self.__rhsResetButton.setIcon(PixmapCache().getIcon(pluginHomeDir +
'svnclearrev.png'))
self.__rhsResetButton.setFocusPolicy(Qt.NoFocus)
self.__rhsResetButton.setEnabled(False)
self.__rhsResetButton.setToolTip("Reset revision to compare")
self.__rhsResetButton.clicked.connect(self.__onRHSReset)
lhsLayout = QHBoxLayout()
lhsLayout.addWidget(self.__lhsRevisionLabel)
lhsLayout.addWidget(self.__lhsResetButton)
rhsLayout = QHBoxLayout()
rhsLayout.addWidget(self.__rhsRevisionLabel)
rhsLayout.addWidget(self.__rhsResetButton)
bothLayout = QVBoxLayout()
bothLayout.addLayout(lhsLayout)
bothLayout.addLayout(rhsLayout)
revisionLayout.addLayout(bothLayout)
self.__diffButton = QToolButton()
self.__diffButton.setText("Diff")
self.__diffButton.setFocusPolicy(Qt.NoFocus)
self.__diffButton.setEnabled(False)
self.__diffButton.clicked.connect(self.__onDiff)
revisionLayout.addWidget(self.__diffButton)
vboxLayout.addWidget(compareGroupbox)
# Log table
logHeaderFrame = QFrame()
logHeaderFrame.setFrameStyle(QFrame.StyledPanel)
logHeaderFrame.setAutoFillBackground(True)
self.__setLightPalette(logHeaderFrame)
logHeaderFrame.setFixedHeight(24)
logHeaderLayout = QHBoxLayout()
logHeaderLayout.setContentsMargins(3, 0, 0, 0)
logHeaderLayout.addWidget(QLabel("Subversion log of " + self.__path))
logHeaderFrame.setLayout(logHeaderLayout)
vboxLayout.addWidget(logHeaderFrame)
self.__logView = QTreeWidget()
self.__logView.setAlternatingRowColors(True)
self.__logView.setRootIsDecorated(False)
self.__logView.setItemsExpandable(False)
self.__logView.setSortingEnabled(True)
self.__logView.setItemDelegate(NoOutlineHeightDelegate(4))
self.__logViewHeader = QTreeWidgetItem(
["", "", "Revision", "Date", "Author", "Message"])
self.__logView.setHeaderItem(self.__logViewHeader)
self.__logView.header().setSortIndicator(REVISION_COL,
Qt.AscendingOrder)
self.__logView.itemChanged.connect(self.__onLogViewChanged)
vboxLayout.addWidget(self.__logView)
# Diff part
diffHeaderFrame = QFrame()
diffHeaderFrame.setFrameStyle(QFrame.StyledPanel)
diffHeaderFrame.setAutoFillBackground(True)
self.__setLightPalette(diffHeaderFrame)
diffHeaderFrame.setFixedHeight(24)
diffLabel = QLabel("Diff")
diffExpandingSpacer = QSpacerItem(10, 10, QSizePolicy.Expanding)
self.__showHideDiffButton = QToolButton()
self.__showHideDiffButton.setAutoRaise(True)
self.__showHideDiffButton.setIcon(PixmapCache().getIcon('less.png'))
self.__showHideDiffButton.setFixedSize(20, 20)
self.__showHideDiffButton.setToolTip("Show diff")
self.__showHideDiffButton.setFocusPolicy(Qt.NoFocus)
self.__showHideDiffButton.clicked.connect(self.__onShowHideDiff)
diffLayout = QHBoxLayout()
diffLayout.setContentsMargins(3, 0, 0, 0)
diffLayout.addWidget(diffLabel)
diffLayout.addSpacerItem(diffExpandingSpacer)
diffLayout.addWidget(self.__showHideDiffButton)
diffHeaderFrame.setLayout(diffLayout)
self.__diffViewer = DiffTabWidget()
self.__diffViewer.setHTML(self.NODIFF)
self.__diffViewer.setVisible(False)
vboxLayout.addWidget(diffHeaderFrame)
vboxLayout.addWidget(self.__diffViewer)
# Buttons at the bottom
buttonBox = QDialogButtonBox(self)
buttonBox.setOrientation(Qt.Horizontal)
buttonBox.setStandardButtons(QDialogButtonBox.Ok)
buttonBox.button(QDialogButtonBox.Ok).setDefault(True)
buttonBox.accepted.connect(self.close)
vboxLayout.addWidget(buttonBox)
return
class Main(plugin.Plugin):
' main class for plugin '
def initialize(self, *args, **kwargs):
' class init '
super(Main, self).initialize(*args, **kwargs)
self.group0 = QGroupBox()
self.group0.setTitle(' Options ')
self.group0.setCheckable(True)
self.group0.toggled.connect(lambda: self.group0.hide())
self.spin1, self.spin2, self.spin3 = QSpinBox(), QSpinBox(), QSpinBox()
self.spin4, self.spin5, self.spin6 = QSpinBox(), QSpinBox(), QSpinBox()
self.spin7, self.spin8, self.spin9 = QSpinBox(), QSpinBox(), QSpinBox()
self.spin10, self.output = QSpinBox(), QTextEdit()
self.reset = QPushButton(QIcon.fromTheme("face-smile"), 'Reset Options')
self.reset.clicked.connect(self.reset_options)
self.reset_options()
self.output.setReadOnly(True)
vboxg3 = QVBoxLayout(self.group0)
for each_widget in (QLabel('<b>Max Attributes Per Class:'), self.spin1,
QLabel('<b>Max Methods Per Class:'), self.spin2,
QLabel('<b>Max Functions Per File:'), self.spin3,
QLabel('<b>Max Classes Per File:'), self.spin4,
QLabel('<b>Max Parameters Per Function:'), self.spin5,
QLabel('<b>Max Lines Per Function:'), self.spin6,
QLabel('<b>Max ControlStatements Per Function:'), self.spin7,
QLabel('<b>Max Lines Per File:'), self.spin8,
QLabel('<b>Max Indentation Levels:'), self.spin9,
QLabel('<b>Max Tabs:'), self.spin10, self.reset):
vboxg3.addWidget(each_widget)
self.group1, self.auto = QGroupBox(), QComboBox()
self.group1.setTitle(' Automation ')
self.group1.setCheckable(True)
self.group1.setToolTip('<font color="red"><b>WARNING:Advanced Setting!')
self.group1.toggled.connect(lambda: self.group1.hide())
self.auto.addItems(['Never run automatically', 'Run when File Saved',
'Run when File Executed', 'Run when Tab Changed',
'Run when File Opened', 'Run before File Saved'])
self.auto.currentIndexChanged.connect(self.on_auto_changed)
QVBoxLayout(self.group1).addWidget(self.auto)
self.button = QPushButton(' Analyze for Best Practice ')
self.button.setMinimumSize(75, 50)
self.button.clicked.connect(self.run)
glow = QGraphicsDropShadowEffect(self)
glow.setOffset(0)
glow.setBlurRadius(99)
glow.setColor(QColor(99, 255, 255))
self.button.setGraphicsEffect(glow)
class TransientWidget(QWidget):
' persistant widget thingy '
def __init__(self, widget_list):
' init sub class '
super(TransientWidget, self).__init__()
vbox = QVBoxLayout(self)
for each_widget in widget_list:
vbox.addWidget(each_widget)
tw = TransientWidget((QLabel('<i>Best Practice analyzer'),
self.group0, self.group1, QLabel('<b>Best Practice Errors:'),
self.output, self.button))
self.scrollable, self.dock = QScrollArea(), QDockWidget()
self.scrollable.setWidgetResizable(True)
self.scrollable.setWidget(tw)
self.dock.setWindowTitle(__doc__)
self.dock.setStyleSheet('QDockWidget::title{text-align: center;}')
self.dock.setWidget(self.scrollable)
ExplorerContainer().addTab(self.dock, "Check")
QPushButton(QIcon.fromTheme("help-about"), 'About', self.dock
).clicked.connect(lambda:
QMessageBox.information(self.dock, __doc__, HELPMSG))
def run(self):
' run the actions '
global MAXVAL
self.output.clear()
self.button.setDisabled(True)
maxvalues = {'maxAttributesPerClass': int(self.spin1.value()),
'maxFunctionsPerClass': int(self.spin2.value()),
'maxFunctionsPerFile': int(self.spin3.value()),
'maxClassesPerFile': int(self.spin4.value()),
'maxParametersPerFunction': int(self.spin5.value()),
'maxLinesPerFunction': int(self.spin6.value()),
'maxControlStatementsPerFunction': int(self.spin7.value()),
'maxLinesPerFile': int(self.spin8.value()),
'maxIndentationLevel': int(self.spin9.value()),
'maxTabs': int(self.spin10.value())}
MAXVAL = maxvalues
self.output.append(SimplePythonChecker().analyze(str(
self.locator.get_service("editor").get_opened_documents()[
self.locator.get_service("editor").get_tab_manager().currentIndex()
]), maxvalues))
self.output.setFocus()
self.button.setEnabled(True)
def on_auto_changed(self):
' automation connects '
if self.auto.currentIndex() is 1:
self.locator.get_service('editor').fileSaved.connect(lambda:
self.run())
QMessageBox.information(self.dock, __doc__,
'<b>Now Actions will Run Automatically when any File is Saved !')
elif self.auto.currentIndex() is 2:
self.locator.get_service('editor').fileExecuted.connect(lambda:
self.run())
QMessageBox.information(self.dock, __doc__,
'<b>Now Actions will Run Automatically when any File is Executed !')
elif self.auto.currentIndex() is 3:
self.locator.get_service('editor').currentTabChanged.connect(lambda:
self.run())
QMessageBox.information(self.dock, __doc__,
'<b>Now Actions will Run Automatically when current Tab is Changed')
elif self.auto.currentIndex() is 4:
self.locator.get_service('editor').fileOpened.connect(lambda:
self.run())
QMessageBox.information(self.dock, __doc__,
'<b>Now Actions will Run Automatically when any File is Opened !')
elif self.auto.currentIndex() is 5:
self.locator.get_service('editor').beforeFileSaved.connect(lambda:
self.run())
QMessageBox.information(self.dock, __doc__,
'<b>Now Actions will Run Automatically before any File is Saved !')
self.group1.setDisabled(True)
def reset_options(self):
' reset the options '
self.spin1.setRange(1, 99)
self.spin2.setRange(1, 99)
self.spin3.setRange(1, 99)
self.spin4.setRange(1, 99)
self.spin5.setRange(1, 9)
self.spin6.setRange(1, 999)
self.spin7.setRange(1, 99)
self.spin8.setRange(1, 9999)
self.spin9.setRange(1, 9)
self.spin10.setRange(1, 9)
self.spin1.setValue(20)
self.spin2.setValue(20)
self.spin3.setValue(20)
self.spin4.setValue(5)
self.spin5.setValue(5)
self.spin6.setValue(100)
self.spin7.setValue(20)
self.spin8.setValue(999)
self.spin9.setValue(5)
self.spin10.setValue(5)
class LeadSheet(VocalPart, _base.ChordNames):
@staticmethod
def title(_=_base.translate):
return _("Lead sheet")
def createWidgets(self, layout):
self.label = QLabel(wordWrap=True)
self.chords = QGroupBox(checkable=True, checked=True)
layout.addWidget(self.label)
layout.addWidget(self.chords)
box = QVBoxLayout()
self.chords.setLayout(box)
_base.ChordNames.createWidgets(self, box)
self.accomp = QCheckBox()
layout.addWidget(self.accomp)
VocalPart.createWidgets(self, layout)
def translateWidgets(self):
VocalPart.translateWidgets(self)
_base.ChordNames.translateWidgets(self)
self.label.setText('<i>{0}</i>'.format(_(
"The Lead Sheet provides a staff with chord names above "
"and lyrics below it. A second staff is optional.")))
self.chords.setTitle(_("Chord names"))
self.accomp.setText(_("Add accompaniment staff"))
self.accomp.setToolTip(_(
"Adds an accompaniment staff and also puts an accompaniment "
"voice in the upper staff."))
def build(self, data, builder):
"""Create chord names, song and lyrics.
Optionally a second staff with a piano accompaniment.
"""
if self.chords.isChecked():
_base.ChordNames.build(self, data, builder)
if self.accomp.isChecked():
p = ly.dom.ChoirStaff()
#TODO: instrument names ?
#TODO: different midi instrument for voice and accompaniment ?
s = ly.dom.Sim(p)
mel = ly.dom.Sim(ly.dom.Staff(parent=s))
v1 = ly.dom.Voice(parent=mel)
s1 = ly.dom.Seq(v1)
ly.dom.Text('\\voiceOne', s1)
a = data.assignMusic('melody', 1)
ly.dom.Identifier(a.name, s1)
s2 = ly.dom.Seq(ly.dom.Voice(parent=mel))
ly.dom.Text('\\voiceTwo', s2)
a = data.assignMusic('accRight', 0)
ly.dom.Identifier(a.name, s2)
acc = ly.dom.Seq(ly.dom.Staff(parent=s))
ly.dom.Clef('bass', acc)
a = data.assignMusic('accLeft', -1)
ly.dom.Identifier(a.name, acc)
if self.ambitus.isChecked():
# We can't use \addlyrics when the voice has a \with {}
# section, because it creates a nested Voice context.
# So if the ambitus engraver should be added to the Voice,
# we don't use \addlyrics but create a new Lyrics context.
# So in that case we don't use addStanzas, but insert the
# Lyrics contexts manually inside our ChoirStaff.
v1.cid = ly.dom.Reference('melody')
ly.dom.Line('\\consists "Ambitus_engraver"', v1.getWith())
count = self.stanzas.value() # number of stanzas
if count == 1:
l = ly.dom.Lyrics()
s.insert_before(acc.parent(), l)
a = self.assignLyrics(data, 'verse')
ly.dom.Identifier(a.name, ly.dom.LyricsTo(v1.cid, l))
else:
for i in range(count):
l = ly.dom.Lyrics()
s.insert_before(acc.parent(), l)
a = self.assignLyrics(data, 'verse', i + 1)
ly.dom.Identifier(a.name, ly.dom.LyricsTo(v1.cid, l))
else:
self.addStanzas(data, v1)
else:
a = data.assignMusic('melody', 1)
p = ly.dom.Staff()
ly.dom.Identifier(a.name, ly.dom.Seq(p))
self.addStanzas(data, p)
if self.ambitus.isChecked():
ly.dom.Line('\\consists "Ambitus_engraver"', p.getWith())
data.nodes.append(p)
