class QmyMainWindow(QMainWindow):
def __init__(self, parent=None):
super().__init__(parent) #调用父类构造函数，创建窗体
self.ui=Ui_MainWindow() #创建UI对象
self.ui.setupUi(self) #构造UI界面
self.ui.progBar_Max.setMaximum(256)
self.ui.progBar_Min.setMaximum(256)
self.ui.progBar_Diff.setMaximum(256)
self.ui.sliderVolumn.setMaximum(100)
self.ui.sliderVolumn.setValue(100)
self.ui.comboDevices.clear()
self.__deviceList=QAudioDeviceInfo.availableDevices(QAudio.AudioInput) #音频输入设备列表
for i in range(len(self.__deviceList)):
device=self.__deviceList[i] #QAudioDeviceInfo类
self.ui.comboDevices.addItem(device.deviceName())
## self.__deviceInfo =None #当前设备信息,QAudioDeviceInfo
self.audioDevice=None #音频输入设备,QAudioInput
self.BUFFER_SIZE=4000
self.ioDevice=None #第1种读取方法，内建的IODevice
## self.externalReader=None #第2种读取方法，外建的IODevice
self.recordFile=QFile() #第3种读取方法，使用QFile直接写入文件
if len(self.__deviceList)>0:
self.ui.comboDevices.setCurrentIndex(0) #触发comboDevices的信号currentIndexChanged()
## self.__deviceInfo =deviceList[0]
else:
self.ui.actStart.setEnabled(False)
self.ui.actDeviceTest.setEnabled(False)
self.ui.groupBoxDevice.setTitle("支持的音频输入设置(无设备)")
## ==============自定义功能函数========================
def __getSampleTypeStr(self,sampleType):
result="Unknown"
if sampleType==QAudioFormat.SignedInt:
result = "SignedInt"
elif sampleType==QAudioFormat.UnSignedInt:
result = "UnSignedInt"
elif sampleType==QAudioFormat.Float:
result = "Float"
elif sampleType==QAudioFormat.Unknown:
result = "Unknown"
return result
def __getByteOrderStr(self,endian):
if (endian==QAudioFormat.LittleEndian):
return "LittleEndian"
else:
return "BigEndian"
## ==============event处理函数==========================
## ==========由connectSlotsByName()自动连接的槽函数============
@pyqtSlot(int) ##选择音频输入设备
def on_comboDevices_currentIndexChanged(self,index):
deviceInfo =self.__deviceList[index] #当前音频设备,QAudioDeviceInfo类型
self.ui.comboCodec.clear()
codecs = deviceInfo.supportedCodecs() #支持的音频编码，字符串列表
for strLine in codecs:
self.ui.comboCodec.addItem(strLine)
self.ui.comboSampleRate.clear() #支持的采样率
sampleRates = deviceInfo.supportedSampleRates() #QList<int>
for i in sampleRates:
self.ui.comboSampleRate.addItem("%d"% i)
self.ui.comboChannels.clear() #支持的通道数
Channels = deviceInfo.supportedChannelCounts() #QList<int>
for i in Channels:
self.ui.comboChannels.addItem("%d"%i )
self.ui.comboSampleTypes.clear() #支持的采样点类型
sampleTypes = deviceInfo.supportedSampleTypes() #QList<QAudioFormat::SampleType>
for i in sampleTypes:
sampTypeStr=self.__getSampleTypeStr(i)
self.ui.comboSampleTypes.addItem(sampTypeStr,i)
self.ui.comboSampleSizes.clear() #采样点大小
sampleSizes = deviceInfo.supportedSampleSizes() #QList<int>
for i in sampleSizes:
self.ui.comboSampleSizes.addItem("%d"%i)
self.ui.comboByteOrder.clear() #字节序
endians = deviceInfo.supportedByteOrders() #QList<QAudioFormat::Endian>
for i in endians:
self.ui.comboByteOrder.addItem(self.__getByteOrderStr(i))
@pyqtSlot() ##使用内建IODevice
def on_radioSaveMode_Inner_clicked(self):
self.ui.groupBox_disp.setVisible(True)
@pyqtSlot() ##使用QFile对象(test.raw)
def on_radioSaveMode_QFile_clicked(self):
self.ui.groupBox_disp.setVisible(False)
@pyqtSlot(int) ##调节录音音量
def on_sliderVolumn_valueChanged(self,value):
self.ui.LabVol.setText("录音音量(%d%%)"%value)
@pyqtSlot() ##测试音频输入设备是否支持选择的设置
def on_actDeviceTest_triggered(self):
settings=QAudioFormat()
settings.setCodec(self.ui.comboCodec.currentText())
settings.setSampleRate(int(self.ui.comboSampleRate.currentText()))
settings.setChannelCount(int(self.ui.comboChannels.currentText()))
k=self.ui.comboSampleTypes.currentData()
settings.setSampleType(k) #QAudioFormat.SampleType
settings.setSampleSize(int(self.ui.comboSampleSizes.currentText()))
if (self.ui.comboByteOrder.currentText()=="LittleEndian"):
settings.setByteOrder(QAudioFormat.LittleEndian)
else:
settings.setByteOrder(QAudioFormat.BigEndian)
index=self.ui.comboDevices.currentIndex()
deviceInfo =self.__deviceList[index] #当前音频设备
if deviceInfo.isFormatSupported(settings):
QMessageBox.information(self,"消息","测试成功，设备支持此设置")
else:
QMessageBox.critical(self,"错误","测试失败，设备不支持此设置")
@pyqtSlot() ##开始音频输入
def on_actStart_triggered(self):
audioFormat=QAudioFormat() #使用固定格式
audioFormat.setSampleRate(8000)
audioFormat.setChannelCount(1)
audioFormat.setSampleSize(8)
audioFormat.setCodec("audio/pcm")
audioFormat.setByteOrder(QAudioFormat.LittleEndian)
audioFormat.setSampleType(QAudioFormat.UnSignedInt)
index=self.ui.comboDevices.currentIndex()
deviceInfo =self.__deviceList[index] #当前音频设备
if (False== deviceInfo.isFormatSupported(audioFormat)):
QMessageBox.critical(self,"错误","测试失败，输入设备不支持此设置")
return
self.audioDevice = QAudioInput(deviceInfo,audioFormat) #音频输入设备
self.audioDevice.setBufferSize(self.BUFFER_SIZE) #设置的缓冲区大小,字节数，并不一定等于实际数据块大小
self.audioDevice.stateChanged.connect(self.do_stateChanged) #状态变化
##1. 使用 start()->QIODevice 启动，返回的内置的IODevice, pull mode，利用readyRead()信号读出数据
if self.ui.radioSaveMode_Inner.isChecked():
self.ioDevice=self.audioDevice.start() #返回内建的IODevice
self.ioDevice.readyRead.connect(self.do_IO_readyRead)
## 2. 自定义流设备QWAudioBlockReader，push mode, start(QIODevice)，不行
## if self.ui.radioSaveMode_External.isChecked():
## self.externalReader = QmyAudioReader()
## self.externalReader.open(QIODevice.WriteOnly)
## self.externalReader.updateBlockInfo.connect(self.do_updateBlockInfo)
## self.audioDevice.start(self.externalReader) #使用外建的IODevice
##3. 写入文件,用 start(QIODevice)启动
if self.ui.radioSaveMode_QFile.isChecked():
self.recordFile.setFileName("test.raw")
self.recordFile.open(QIODevice.WriteOnly)
self.audioDevice.start(self.recordFile)
@pyqtSlot() ##停止音频输入
def on_actStop_triggered(self):
self.audioDevice.stop()
self.audioDevice.deleteLater()
##1. 使用 QIODevice =start()返回的内置的IODevice, pull mode，利用readyRead()信号读出数据
#无需处理,停止后self.ioDevice自动变为无效
##2. 外部IODevice接收音频输入数据的流设备
## if self.ui.radioSaveMode_External.isChecked():
## self.externalReader.close()
## self.externalReader.updateBlockSize.disconnect(self.do_updateBlockInfo)
## del self.externalReader #删除外建设备
##3. 写入文件,start(QIODevice) 启动
if self.ui.radioSaveMode_QFile.isChecked():
self.recordFile.close() #关闭文件
## =============自定义槽函数===============================
##1. 使用QIODevice* start()返回的内置的IODevice, pull mode，利用readyRead()信号读出数据
def do_IO_readyRead(self): ##内建IODevice，读取缓冲区数据
self.ui.LabBufferSize.setText("bufferSize()=%d"
%self.audioDevice.bufferSize())
byteCount = self.audioDevice.bytesReady() #可以读取的字节数
self.ui.LabBytesReady.setText("bytesReady()=%d"%byteCount)
if byteCount>self.BUFFER_SIZE:
byteCount=self.BUFFER_SIZE
buffer=self.ioDevice.read(byteCount) #返回的是bytes类型，便于处理
## buffer=self.ioDevice.readAll() #不能用readAll()读取，返回的是QByteArray,需要再转换为bytes
## print(type(buffer))
## print(buffer)
maxSize=len(buffer)
## print(maxSize)
self.ui.LabBlockSize.setText("IODevice数据字节数=%d"%maxSize)
maxV=0
minV=255
for k in range(maxSize):
V=buffer[k] #取一个字节,整数
if V>maxV:
maxV=V #求最大值
if V<minV:
minV=V #求最小值
self.ui.progBar_Max.setValue(maxV)
self.ui.progBar_Min.setValue(minV)
self.ui.progBar_Diff.setValue(maxV-minV)
def do_stateChanged(self,state): ##设备状态变化
isStoped=(state== QAudio.StoppedState) #停止状态
self.ui.groupBox_saveMode.setEnabled(isStoped)
self.ui.sliderVolumn.setEnabled(isStoped)
self.ui.actStart.setEnabled(isStoped)
self.ui.actStop.setEnabled(not isStoped)
self.ui.actDeviceTest.setEnabled(isStoped)
self.ui.sliderVolumn.setEnabled(isStoped)
if state== QAudio.ActiveState:
self.ui.statusBar.showMessage("state: ActiveState")
elif state== QAudio.SuspendedState:
self.ui.statusBar.showMessage("state: SuspendedState")
elif state== QAudio.StoppedState:
self.ui.statusBar.showMessage("state: StoppedState")
elif state== QAudio.IdleState:
self.ui.statusBar.showMessage("state: IdleState")
elif state== QAudio.InterruptedState:
self.ui.statusBar.showMessage("state: InterruptedState")
