def remove_selected(window: PlatformWindow,
list_widget: QListWidget) -> None:
platform_to_remove = list_widget.itemWidget(
list_widget.item(list_widget.currentRow())).to_platform()
index_of_item = -1
for i in range(len(window.__platforms_to_save)):
if window.__platforms_to_save[
i].platform_name == platform_to_remove.platform_name:
index_of_item = i
if index_of_item != -1:
window.__platforms_to_save.remove(
window.__platforms_to_save[index_of_item])
list_widget.takeItem(list_widget.currentRow())
window.apply_button.setEnabled(window.apply_possible())
class TwoListSelection(QtWidgets.QWidget):
def __init__(self, parent=None):
super(TwoListSelection, self).__init__(parent)
self.setup_layout()
def setup_layout(self):
lay = QtWidgets.QHBoxLayout(self)
selectedLayout = QVBoxLayout()
self.mInput = QListWidget()
selectedLayout.addWidget(QLabel("Selected:"))
selectedLayout.addWidget(self.mInput)
availableLayout = QVBoxLayout()
self.mOuput = QListWidget()
availableLayout.addWidget(QLabel("Available"))
availableLayout.addWidget(self.mOuput)
self.mButtonToSelected = QtWidgets.QPushButton(">>")
self.mBtnMoveToAvailable = QtWidgets.QPushButton(">")
self.mBtnMoveToSelected = QtWidgets.QPushButton("<")
self.mButtonToAvailable = QtWidgets.QPushButton("<<")
vlay = QtWidgets.QVBoxLayout()
vlay.addStretch()
vlay.addWidget(self.mButtonToSelected)
vlay.addWidget(self.mBtnMoveToAvailable)
vlay.addWidget(self.mBtnMoveToSelected)
vlay.addWidget(self.mButtonToAvailable)
vlay.addStretch()
self.mBtnUp = QtWidgets.QPushButton("Up")
self.mBtnDown = QtWidgets.QPushButton("Down")
vlay2 = QtWidgets.QVBoxLayout()
vlay2.addStretch()
vlay2.addWidget(self.mBtnUp)
vlay2.addWidget(self.mBtnDown)
vlay2.addStretch()
lay.addLayout(selectedLayout)
lay.addLayout(vlay)
lay.addLayout(availableLayout)
lay.addLayout(vlay2)
self.update_buttons_status()
self.connections()
@QtCore.pyqtSlot()
def update_buttons_status(self):
self.mBtnUp.setDisabled(not bool(self.mOuput.selectedItems())
or self.mOuput.currentRow() == 0)
self.mBtnDown.setDisabled(
not bool(self.mOuput.selectedItems())
or self.mOuput.currentRow() == (self.mOuput.count() - 1))
self.mBtnMoveToAvailable.setDisabled(
not bool(self.mInput.selectedItems())
or self.mOuput.currentRow() == 0)
self.mBtnMoveToSelected.setDisabled(
not bool(self.mOuput.selectedItems()))
def connections(self):
self.mInput.itemSelectionChanged.connect(self.update_buttons_status)
self.mOuput.itemSelectionChanged.connect(self.update_buttons_status)
self.mBtnMoveToAvailable.clicked.connect(
self.on_mBtnMoveToAvailable_clicked)
self.mBtnMoveToSelected.clicked.connect(
self.on_mBtnMoveToSelected_clicked)
self.mButtonToAvailable.clicked.connect(
self.on_mButtonToAvailable_clicked)
self.mButtonToSelected.clicked.connect(
self.on_mButtonToSelected_clicked)
self.mBtnUp.clicked.connect(self.on_mBtnUp_clicked)
self.mBtnDown.clicked.connect(self.on_mBtnDown_clicked)
@QtCore.pyqtSlot()
def on_mBtnMoveToAvailable_clicked(self):
self.mOuput.addItem(self.mInput.takeItem(self.mInput.currentRow()))
@QtCore.pyqtSlot()
def on_mBtnMoveToSelected_clicked(self):
self.mInput.addItem(self.mOuput.takeItem(self.mOuput.currentRow()))
@QtCore.pyqtSlot()
def on_mButtonToAvailable_clicked(self):
while self.mOuput.count() > 0:
self.mInput.addItem(self.mOuput.takeItem(0))
@QtCore.pyqtSlot()
def on_mButtonToSelected_clicked(self):
while self.mInput.count() > 0:
self.mOuput.addItem(self.mInput.takeItem(0))
@QtCore.pyqtSlot()
def on_mBtnUp_clicked(self):
row = self.mOuput.currentRow()
currentItem = self.mOuput.takeItem(row)
self.mOuput.insertItem(row - 1, currentItem)
self.mOuput.setCurrentRow(row - 1)
@QtCore.pyqtSlot()
def on_mBtnDown_clicked(self):
row = self.mOuput.currentRow()
currentItem = self.mOuput.takeItem(row)
self.mOuput.insertItem(row + 1, currentItem)
self.mOuput.setCurrentRow(row + 1)
def addAvailableItems(self, items):
self.mInput.addItems(items)
def get_left_elements(self):
r = []
for i in range(self.mInput.count()):
it = self.mInput.item(i)
r.append(it.text())
return r
def get_right_elements(self):
r = []
for i in range(self.mOuput.count()):
it = self.mOuput.item(i)
r.append(it.text())
return r
class MainWindow(QMainWindow):
def __init__(self):
super().__init__()
self.setFixedSize(800, 410)
self.setWindowTitle("PyLX16A Servo Testing Software")
self.port_selection_box = QComboBox(self)
self.port_selection_box.setFixedSize(200, 27)
self.port_selection_box.move(30, 65)
port_selection_box_label = QLabel("Select Port:", self)
port_selection_box_label.move(30, 35)
self.port_selection_box_refresh_button = QPushButton("Refresh", self)
self.port_selection_box_refresh_button.setFixedSize(60, 23)
self.port_selection_box_refresh_button.move(170, 38)
self.id_selection_box = QListWidget(self)
self.id_selection_box.setFixedSize(200, 200)
self.id_selection_box.move(30, 135)
id_selection_box_label = QLabel("Connected Servos:", self)
id_selection_box_label.setFixedWidth(200)
id_selection_box_label.move(30, 105)
self.id_selection_box_refresh_button = QPushButton("Refresh", self)
self.id_selection_box_refresh_button.setFixedSize(60, 23)
self.id_selection_box_refresh_button.move(170, 108)
self.set_id_line_edit = QLineEdit(self)
self.set_id_line_edit.setFixedSize(50, 27)
self.set_id_line_edit.move(80, 355)
set_id_line_edit_label = QLabel("Set ID:", self)
set_id_line_edit_label.move(30, 355)
set_id_line_edit_label.setFixedSize(50, 27)
self.set_id_button = QPushButton("Change ID!", self)
self.set_id_button.setFixedSize(85, 27)
self.set_id_button.move(145, 355)
self.position_slider = QSlider(Qt.Orientation.Horizontal, self)
self.position_slider.setMinimum(0)
self.position_slider.setMaximum(240)
self.position_slider.setFixedWidth(200)
self.position_slider.move(300, 55)
self.position_slider_readout = QLabel("0.00°", self)
self.position_slider_readout.setFixedWidth(50)
self.position_slider_readout.move(450, 30)
self.position_slider_readout.setAlignment(
Qt.AlignmentFlag.AlignRight | Qt.AlignmentFlag.AlignVCenter)
position_slider_label = QLabel("Angle (degrees):", self)
position_slider_label.move(300, 30)
self.position_offset_slider = QSlider(Qt.Orientation.Horizontal, self)
self.position_offset_slider.setMinimum(-30)
self.position_offset_slider.setMaximum(30)
self.position_offset_slider.setFixedWidth(200)
self.position_offset_slider.move(300, 125)
self.position_offset_slider_readout = QLabel("0.00°", self)
self.position_offset_slider_readout.setFixedWidth(50)
self.position_offset_slider_readout.move(450, 100)
self.position_offset_slider_readout.setAlignment(
Qt.AlignmentFlag.AlignRight | Qt.AlignmentFlag.AlignVCenter)
position_offset_slider_label = QLabel("Angle offset (degrees):", self)
position_offset_slider_label.setFixedWidth(200)
position_offset_slider_label.move(300, 100)
self.angle_lower_limit_textentry = QLineEdit(self)
self.angle_lower_limit_textentry.setFixedWidth(50)
self.angle_lower_limit_textentry.move(450, 175)
self.angle_lower_limit_textentry.setValidator(
QIntValidator(0, 240, self))
self.angle_upper_limit_textentry = QLineEdit(self)
self.angle_upper_limit_textentry.setFixedWidth(50)
self.angle_upper_limit_textentry.move(450, 210)
self.angle_upper_limit_textentry.setValidator(
QIntValidator(0, 240, self))
self.angle_lower_limit_textentry_label = QLabel(
"Lower Limit (degrees):", self)
self.angle_lower_limit_textentry_label.move(300, 175)
self.angle_lower_limit_textentry_label.setFixedWidth(150)
self.angle_upper_limit_textentry_label = QLabel(
"Upper Limit (degrees):", self)
self.angle_upper_limit_textentry_label.move(300, 210)
self.angle_upper_limit_textentry_label.setFixedWidth(150)
self.vin_lower_limit_textentry = QLineEdit(self)
self.vin_lower_limit_textentry.setFixedWidth(50)
self.vin_lower_limit_textentry.move(450, 265)
self.vin_lower_limit_textentry.setValidator(
QIntValidator(4500, 12000, self))
self.vin_upper_limit_textentry = QLineEdit(self)
self.vin_upper_limit_textentry.setFixedWidth(50)
self.vin_upper_limit_textentry.move(450, 300)
self.vin_upper_limit_textentry.setValidator(
QIntValidator(4500, 12000, self))
self.vin_lower_limit_textentry_label = QLabel(
"Voltage Lower Limit (mV):", self)
self.vin_lower_limit_textentry_label.move(300, 265)
self.vin_lower_limit_textentry_label.setFixedWidth(150)
self.vin_upper_limit_textentry_label = QLabel(
"Voltage Upper Limit (mV):", self)
self.vin_upper_limit_textentry_label.move(300, 300)
self.vin_upper_limit_textentry_label.setFixedWidth(150)
self.temp_limit_textentry = QLineEdit(self)
self.temp_limit_textentry.setFixedWidth(50)
self.temp_limit_textentry.move(450, 355)
self.temp_limit_textentry.setValidator(QIntValidator(50, 100, self))
self.temp_limit_textentry_label = QLabel("Temp Limit (°C):", self)
self.temp_limit_textentry_label.move(300, 355)
self.temp_limit_textentry_label.setFixedWidth(150)
self.servo_mode_radio_button = QRadioButton("Servo Mode", self)
self.servo_mode_radio_button.move(565, 50)
self.motor_mode_radio_button = QRadioButton("Motor Mode", self)
self.motor_mode_radio_button.move(565, 75)
self.motor_speed_slider = QSlider(Qt.Orientation.Horizontal, self)
self.motor_speed_slider.setMinimum(-1000)
self.motor_speed_slider.setMaximum(1000)
self.motor_speed_slider.setFixedWidth(200)
self.motor_speed_slider.move(565, 125)
motor_speed_slider_label = QLabel("Motor Speed:", self)
motor_speed_slider_label.move(565, 100)
self.torque_enabled_checkbox = QCheckBox("Torque Enabled", self)
self.torque_enabled_checkbox.move(565, 175)
self.torque_enabled_checkbox.setFixedWidth(200)
self.led_enabled_checkbox = QCheckBox("LED Enabled", self)
self.led_enabled_checkbox.move(565, 210)
self.led_enabled_checkbox.setFixedWidth(200)
self.led_over_temp_checkbox = QCheckBox("LED Over Temperature", self)
self.led_over_temp_checkbox.move(565, 258)
self.led_over_temp_checkbox.setFixedWidth(200)
self.led_over_voltage_checkbox = QCheckBox("LED Over Voltage", self)
self.led_over_voltage_checkbox.move(565, 283)
self.led_over_voltage_checkbox.setFixedWidth(200)
self.led_rotor_locked_checkbox = QCheckBox("LED Rotor Locked", self)
self.led_rotor_locked_checkbox.move(565, 308)
self.led_rotor_locked_checkbox.setFixedWidth(200)
self.physical_position_readout = QLabel("--°", self)
self.physical_position_readout.move(565, 367)
self.physical_position_readout.setFixedWidth(200)
self.physical_position_readout_label = QLabel("Position", self)
self.physical_position_readout_label.move(565, 347)
self.temperature_readout = QLabel("-- °C", self)
self.temperature_readout.move(635, 367)
self.temperature_readout.setFixedWidth(200)
self.temperature_readout_label = QLabel("Temperature", self)
self.temperature_readout_label.move(635, 347)
self.voltage_readout = QLabel("-- V", self)
self.voltage_readout.move(730, 367)
self.voltage_readout.setFixedWidth(200)
self.voltage_readout_label = QLabel("Voltage", self)
self.voltage_readout_label.move(730, 347)
self.readout_update_timer = QTimer(self)
self.readout_update_timer.timeout.connect(self.update_readouts)
self.readout_update_timer.start(250)
self.active_servo: LX16A = None
self.position_slider.setValue(0)
self.position_offset_slider.setValue(0)
self.motor_speed_slider.setValue(0)
self.id_selection_box_refresh_button.setEnabled(False)
self.disable_widgets()
self.port_selection_box.currentTextChanged.connect(
self.port_selection_box_changed)
self.port_selection_box_refresh_button.clicked.connect(
self.port_refresh_button_clicked)
self.id_selection_box.currentTextChanged.connect(
self.id_selection_box_changed)
self.id_selection_box_refresh_button.clicked.connect(
self.id_refresh_button_clicked)
self.set_id_button.pressed.connect(self.id_updated)
self.position_slider.sliderMoved.connect(self.position_slider_updated)
self.position_offset_slider.sliderMoved.connect(
self.position_offset_slider_updated)
self.angle_lower_limit_textentry.textChanged.connect(
self.angle_lower_limit_updated)
self.angle_upper_limit_textentry.textChanged.connect(
self.angle_upper_limit_updated)
self.vin_lower_limit_textentry.textChanged.connect(
self.vin_lower_limit_updated)
self.vin_upper_limit_textentry.textChanged.connect(
self.vin_upper_limit_updated)
self.temp_limit_textentry.textChanged.connect(self.temp_limit_updated)
self.servo_mode_radio_button.toggled.connect(
self.servo_mode_radio_button_toggled)
self.motor_mode_radio_button.toggled.connect(
self.motor_mode_radio_button_toggled)
self.motor_speed_slider.valueChanged.connect(
self.motor_speed_slider_updated)
self.torque_enabled_checkbox.stateChanged.connect(
self.torque_enabled_checkbox_toggled)
self.led_enabled_checkbox.stateChanged.connect(
self.led_enabled_checkbox_toggled)
self.led_over_temp_checkbox.stateChanged.connect(
self.led_error_triggers_checkbox_toggled)
self.led_over_voltage_checkbox.stateChanged.connect(
self.led_error_triggers_checkbox_toggled)
self.led_rotor_locked_checkbox.stateChanged.connect(
self.led_error_triggers_checkbox_toggled)
self.scan_for_ports()
def disable_widgets(self):
self.set_id_line_edit.setEnabled(False)
self.position_slider.setEnabled(False)
self.position_offset_slider.setEnabled(False)
self.angle_lower_limit_textentry.setEnabled(False)
self.angle_upper_limit_textentry.setEnabled(False)
self.vin_lower_limit_textentry.setEnabled(False)
self.vin_upper_limit_textentry.setEnabled(False)
self.temp_limit_textentry.setEnabled(False)
self.servo_mode_radio_button.setEnabled(False)
self.motor_mode_radio_button.setEnabled(False)
self.motor_speed_slider.setEnabled(False)
self.torque_enabled_checkbox.setEnabled(False)
self.led_enabled_checkbox.setEnabled(False)
self.led_over_temp_checkbox.setEnabled(False)
self.led_over_voltage_checkbox.setEnabled(False)
self.led_rotor_locked_checkbox.setEnabled(False)
def enable_widgets(self):
self.set_id_line_edit.setEnabled(True)
self.position_slider.setEnabled(True)
self.position_offset_slider.setEnabled(True)
self.angle_lower_limit_textentry.setEnabled(True)
self.angle_upper_limit_textentry.setEnabled(True)
self.vin_lower_limit_textentry.setEnabled(True)
self.vin_upper_limit_textentry.setEnabled(True)
self.temp_limit_textentry.setEnabled(True)
self.servo_mode_radio_button.setEnabled(True)
self.motor_mode_radio_button.setEnabled(True)
self.motor_speed_slider.setEnabled(True)
self.torque_enabled_checkbox.setEnabled(True)
self.led_enabled_checkbox.setEnabled(True)
self.led_over_temp_checkbox.setEnabled(True)
self.led_over_voltage_checkbox.setEnabled(True)
self.led_rotor_locked_checkbox.setEnabled(True)
def clear_servo(self):
self.active_servo = None
@catch_disconnection
def set_servo_id(self, id_):
if not id_.isdigit():
return
self.active_servo = LX16A(int(id_))
self.active_servo.enable_torque()
self.position_slider.setValue(
int(self.active_servo.get_physical_angle()))
self.position_slider_readout.setText(
f"{int(self.active_servo.get_physical_angle() * 25 / 6) * 6 / 25:0.2f}°"
)
self.position_offset_slider.setValue(
int(self.active_servo.get_angle_offset()))
self.position_offset_slider_readout.setText(
f"{int(self.active_servo.get_angle_offset() * 25 / 6) * 6 / 25:0.2f}°"
)
self.angle_lower_limit_textentry.setText(
str(int(self.active_servo.get_angle_limits()[0])))
self.angle_upper_limit_textentry.setText(
str(int(self.active_servo.get_angle_limits()[1])))
self.vin_lower_limit_textentry.setText(
str(self.active_servo.get_vin_limits()[0]))
self.vin_upper_limit_textentry.setText(
str(self.active_servo.get_vin_limits()[1]))
self.temp_limit_textentry.setText(
str(self.active_servo.get_temp_limit()))
self.motor_speed_slider.setValue(self.active_servo.get_motor_speed(
) if self.active_servo.is_motor_mode() else 0)
if self.active_servo.is_motor_mode():
self.motor_mode_radio_button.setChecked(True)
else:
self.servo_mode_radio_button.setChecked(True)
self.motor_speed_slider.setEnabled(self.active_servo.is_motor_mode())
self.torque_enabled_checkbox.setChecked(
self.active_servo.is_torque_enabled())
self.led_enabled_checkbox.setChecked(
self.active_servo.is_led_power_on())
self.led_over_temp_checkbox.setChecked(
self.active_servo.get_led_error_triggers()[0])
self.led_over_voltage_checkbox.setChecked(
self.active_servo.get_led_error_triggers()[1])
self.led_rotor_locked_checkbox.setChecked(
self.active_servo.get_led_error_triggers()[2])
@catch_disconnection
def scan_for_servos(self, port):
self.setCursor(Qt.CursorShape.WaitCursor)
LX16A.initialize(port)
self.id_selection_box.clear()
for i in range(0, 254):
try:
servo = LX16A(i)
self.id_selection_box.addItem(str(i))
except:
pass
self.setCursor(Qt.CursorShape.ArrowCursor)
@catch_disconnection
def scan_for_ports(self):
ports = serial.tools.list_ports.comports()
for port in ports:
self.port_selection_box.addItem(port.device)
@catch_disconnection
def update_readouts(self):
if self.active_servo is None:
return
try:
self.physical_position_readout.setText(
f"{self.active_servo.get_physical_angle():0.2f}°")
self.temperature_readout.setText(
f"{self.active_servo.get_temp()} °C")
self.voltage_readout.setText(
f"{self.active_servo.get_vin() / 1000} V")
except (ServoTimeoutError, ServoChecksumError):
pass
@catch_disconnection
def id_updated(self):
new_id = self.set_id_line_edit.text()
try:
servo = LX16A(int(new_id))
except ServoTimeoutError:
# Meaning this ID is not taken
self.active_servo.set_id(int(new_id))
self.id_selection_box.item(
self.id_selection_box.currentRow()).setText(new_id)
return
QMessageBox.warning(None, "Error", "ID already taken")
@catch_disconnection
def position_slider_updated(self, pos):
if float(self.voltage_readout.text()[:-2]) < 5:
QMessageBox.warning(
None,
"Error",
"The voltage going through the servo is too low. Is your battery powered on?",
)
return
self.active_servo.move(pos)
self.position_slider_readout.setText(
f"{int(pos * 25 / 6) * 6 / 25:0.2f}°")
@catch_disconnection
def position_offset_slider_updated(self, pos):
self.active_servo.set_angle_offset(pos)
self.position_offset_slider_readout.setText(
f"{int(pos * 25 / 6) * 6 / 25:0.2f}°")
@catch_disconnection
def angle_lower_limit_updated(self, text):
if (QIntValidator(0, 240, self).validate(text, 0) !=
QIntValidator.State.Acceptable):
return
if int(text) > int(self.angle_upper_limit_textentry.text()):
return
self.active_servo.set_angle_limits(
int(text), int(self.angle_upper_limit_textentry.text()))
@catch_disconnection
def angle_upper_limit_updated(self, text):
if (QIntValidator(0, 240, self).validate(text, 0) !=
QIntValidator.State.Acceptable):
return
if int(text) < int(self.angle_lower_limit_textentry.text()):
return
self.active_servo.set_angle_limits(
int(self.angle_lower_limit_textentry.text()), int(text))
@catch_disconnection
def vin_lower_limit_updated(self, text):
if (QIntValidator(4500, 12000, self).validate(text, 0) !=
QIntValidator.State.Acceptable):
return
if int(text) > int(self.vin_upper_limit_textentry.text()):
return
self.active_servo.set_vin_limits(
int(text), int(self.vin_upper_limit_textentry.text()))
@catch_disconnection
def vin_upper_limit_updated(self, text):
if (QIntValidator(4500, 12000, self).validate(text, 0) !=
QIntValidator.State.Acceptable):
return
if int(text) < int(self.vin_lower_limit_textentry.text()):
return
self.active_servo.set_vin_limits(
int(self.vin_lower_limit_textentry.text()), int(text))
@catch_disconnection
def temp_limit_updated(self, text):
if (QIntValidator(50, 100, self).validate(text, 0) !=
QIntValidator.State.Acceptable):
return
self.active_servo.set_temp_limit(int(text))
@catch_disconnection
def servo_mode_radio_button_toggled(self, checked):
if checked:
self.active_servo.servo_mode()
self.motor_speed_slider.setEnabled(False)
self.position_slider.setEnabled(True)
self.position_offset_slider.setEnabled(True)
else:
self.active_servo.motor_mode(int(self.motor_speed_slider.value()))
self.motor_speed_slider.setEnabled(True)
self.position_slider.setEnabled(False)
self.position_offset_slider.setEnabled(False)
@catch_disconnection
def motor_mode_radio_button_toggled(self, checked):
if checked:
self.active_servo.motor_mode(int(self.motor_speed_slider.value()))
self.motor_speed_slider.setEnabled(True)
self.position_slider.setEnabled(False)
self.position_offset_slider.setEnabled(False)
else:
self.active_servo.servo_mode()
self.motor_speed_slider.setEnabled(False)
self.position_slider.setEnabled(True)
self.position_offset_slider.setEnabled(True)
@catch_disconnection
def motor_speed_slider_updated(self, pos):
self.active_servo.motor_mode(pos)
@catch_disconnection
def torque_enabled_checkbox_toggled(self, checked):
if checked:
self.active_servo.enable_torque()
else:
self.active_servo.disable_torque()
self.position_slider.setEnabled(checked)
self.position_offset_slider.setEnabled(checked)
self.servo_mode_radio_button.setEnabled(checked)
self.motor_mode_radio_button.setEnabled(checked)
self.motor_speed_slider.setEnabled(checked)
@catch_disconnection
def led_enabled_checkbox_toggled(self, checked):
if checked:
self.active_servo.led_power_on()
else:
self.active_servo.led_power_off()
@catch_disconnection
def led_error_triggers_checkbox_toggled(self):
self.active_servo.set_led_error_triggers(
self.led_over_voltage_checkbox.isChecked(),
self.led_over_temp_checkbox.isChecked(),
self.led_rotor_locked_checkbox.isChecked(),
)
@catch_disconnection
def port_refresh_button_clicked(self, value):
self.id_selection_box_refresh_button.setEnabled(False)
self.disable_widgets()
self.port_selection_box.clear()
self.id_selection_box.clear()
self.scan_for_ports()
@catch_disconnection
def id_refresh_button_clicked(self, value):
self.disable_widgets()
self.id_selection_box.clear()
self.scan_for_servos(self.port_selection_box.currentText())
@catch_disconnection
def port_selection_box_changed(self, text):
if text == "":
return
self.id_selection_box_refresh_button.setEnabled(True)
self.disable_widgets()
self.id_selection_box.clear()
self.clear_servo()
self.scan_for_servos(text)
@catch_disconnection
def id_selection_box_changed(self, text):
if text == "":
return
self.enable_widgets()
self.set_servo_id(text)