class FlatCAMInfoBar(QWidget):
def __init__(self, parent=None):
super(FlatCAMInfoBar, self).__init__(parent=parent)
self.icon = QLabel(self)
self.icon.setGeometry(0, 0, 12, 12)
self.pmap = QtGui.QPixmap('share/graylight12.png')
self.icon.setPixmap(self.pmap)
layout = QHBoxLayout()
layout.setContentsMargins(5, 0, 5, 0)
self.setLayout(layout)
layout.addWidget(self.icon)
self.text = QLabel(self)
self.text.setText("Hello!")
self.text.setToolTip("Hello!")
layout.addWidget(self.text)
layout.addStretch()
def set_text_(self, text):
self.text.setText(text)
self.text.setToolTip(text)
def set_status(self, text, level="info"):
level = str(level)
self.pmap.fill()
if level == "error":
self.pmap = QtGui.QPixmap('share/redlight12.png')
elif level == "success":
self.pmap = QtGui.QPixmap('share/greenlight12.png')
elif level == "warning":
self.pmap = QtGui.QPixmap('share/yellowlight12.png')
else:
self.pmap = QtGui.QPixmap('share/graylight12.png')
self.icon.setPixmap(self.pmap)
self.set_text_(text)
class DblSidedTool(FlatCAMTool):
toolName = "Double-Sided PCB Tool"
def __init__(self, app):
FlatCAMTool.__init__(self, app)
## Title
title_label = QLabel("<font size=4><b>%s</b></font>" % self.toolName)
self.layout.addWidget(title_label)
## Form Layout
form_layout = QFormLayout()
self.layout.addLayout(form_layout)
## Layer to mirror
self.object_combo = QComboBox()
self.object_combo.setModel(self.app.collection.model)
self.botlay_label = QLabel("Bottom Layer:")
self.botlay_label.setToolTip("Layer to be mirrorer.")
# form_layout.addRow("Bottom Layer:", self.object_combo)
form_layout.addRow(self.botlay_label, self.object_combo)
## Axis
self.mirror_axis = RadioSet([{
'label': 'X',
'value': 'X'
}, {
'label': 'Y',
'value': 'Y'
}])
self.mirax_label = QLabel("Mirror Axis:")
self.mirax_label.setToolTip(
"Mirror vertically (X) or horizontally (Y).")
# form_layout.addRow("Mirror Axis:", self.mirror_axis)
form_layout.addRow(self.mirax_label, self.mirror_axis)
## Axis Location
self.axis_location = RadioSet([{
'label': 'Point',
'value': 'point'
}, {
'label': 'Box',
'value': 'box'
}])
self.axloc_label = QLabel("Axis Location:")
self.axloc_label.setToolTip(
"The axis should pass through a <b>point</b> or cut "
"a specified <b>box</b> (in a Geometry object) in "
"the middle.")
# form_layout.addRow("Axis Location:", self.axis_location)
form_layout.addRow(self.axloc_label, self.axis_location)
## Point/Box
self.point_box_container = QVBoxLayout()
self.pb_label = QLabel("Point/Box:")
self.pb_label.setToolTip(
"Specify the point (x, y) through which the mirror axis "
"passes or the Geometry object containing a rectangle "
"that the mirror axis cuts in half.")
# form_layout.addRow("Point/Box:", self.point_box_container)
form_layout.addRow(self.pb_label, self.point_box_container)
self.point = EvalEntry()
self.point_box_container.addWidget(self.point)
self.box_combo = QComboBox()
self.box_combo.setModel(self.app.collection.model)
self.point_box_container.addWidget(self.box_combo)
self.box_combo.hide()
## Alignment holes
self.alignment_holes = EvalEntry()
self.ah_label = QLabel("Alignment Holes:")
self.ah_label.setToolTip("Alignment holes (x1, y1), (x2, y2), ... "
"on one side of the mirror axis.")
form_layout.addRow(self.ah_label, self.alignment_holes)
## Drill diameter for alignment holes
self.drill_dia = LengthEntry()
self.dd_label = QLabel("Drill diam.:")
self.dd_label.setToolTip("Diameter of the drill for the "
"alignment holes.")
form_layout.addRow(self.dd_label, self.drill_dia)
## Buttons
hlay = QHBoxLayout()
self.layout.addLayout(hlay)
hlay.addStretch()
self.create_alignment_hole_button = QPushButton(
"Create Alignment Drill")
self.create_alignment_hole_button.setToolTip(
"Creates an Excellon Object containing the "
"specified alignment holes and their mirror "
"images.")
self.mirror_object_button = QPushButton("Mirror Object")
self.mirror_object_button.setToolTip(
"Mirrors (flips) the specified object around "
"the specified axis. Does not create a new "
"object, but modifies it.")
hlay.addWidget(self.create_alignment_hole_button)
hlay.addWidget(self.mirror_object_button)
self.layout.addStretch()
## Signals
self.create_alignment_hole_button.clicked.connect(
self.on_create_alignment_holes)
self.mirror_object_button.clicked.connect(self.on_mirror)
self.axis_location.group_toggle_fn = self.on_toggle_pointbox
## Initialize form
self.mirror_axis.set_value('X')
self.axis_location.set_value('point')
def on_create_alignment_holes(self):
axis = self.mirror_axis.get_value()
mode = self.axis_location.get_value()
if mode == "point":
px, py = self.point.get_value()
else:
selection_index = self.box_combo.currentIndex()
bb_obj = self.app.collection.object_list[
selection_index] # TODO: Direct access??
xmin, ymin, xmax, ymax = bb_obj.bounds()
px = 0.5 * (xmin + xmax)
py = 0.5 * (ymin + ymax)
xscale, yscale = {"X": (1.0, -1.0), "Y": (-1.0, 1.0)}[axis]
dia = self.drill_dia.get_value()
tools = {"1": {"C": dia}}
# holes = self.alignment_holes.get_value()
holes = eval('[{}]'.format(self.alignment_holes.text()))
drills = []
for hole in holes:
point = Point(hole)
point_mirror = affinity.scale(point,
xscale,
yscale,
origin=(px, py))
drills.append({"point": point, "tool": "1"})
drills.append({"point": point_mirror, "tool": "1"})
def obj_init(obj_inst, app_inst):
obj_inst.tools = tools
obj_inst.drills = drills
obj_inst.create_geometry()
self.app.new_object("excellon", "Alignment Drills", obj_init)
def on_mirror(self):
selection_index = self.object_combo.currentIndex()
fcobj = self.app.collection.object_list[selection_index]
# For now, lets limit to Gerbers and Excellons.
# assert isinstance(gerb, FlatCAMGerber)
if not isinstance(fcobj, FlatCAMGerber) and \
not isinstance(fcobj, FlatCAMExcellon) and \
not isinstance(fcobj, FlatCAMGeometry):
self.app.inform.emit(
"ERROR: Only Gerber, Excellon and Geometry objects can be mirrored."
)
return
axis = self.mirror_axis.get_value()
mode = self.axis_location.get_value()
if mode == "point":
px, py = self.point.get_value()
else:
selection_index = self.box_combo.currentIndex()
bb_obj = self.app.collection.object_list[
selection_index] # TODO: Direct access??
xmin, ymin, xmax, ymax = bb_obj.bounds()
px = 0.5 * (xmin + xmax)
py = 0.5 * (ymin + ymax)
# Ensure that the selected object will display when it is mirrored.
# If an object's plot setting is False it will still be available in
# the combo box. If the plot is not enforced to True then the user
# gets no feedback of the operation.
fcobj.options["plot"] = True
fcobj.mirror(axis, [px, py])
fcobj.plot()
def on_toggle_pointbox(self):
if self.axis_location.get_value() == "point":
self.point.show()
self.box_combo.hide()
else:
self.point.hide()
self.box_combo.show()
class ToolTransform(FlatCAMTool):
toolName = "Object Transformation"
rotateName = "Rotate Transformation"
skewName = "Skew/Shear Transformation"
flipName = "Flip Transformation"
def __init__(self, app):
FlatCAMTool.__init__(self, app)
self.transform_lay = QVBoxLayout()
self.layout.addLayout(self.transform_lay)
## Title
title_label = QLabel("<font size=4><b>%s</b></font><br>" %
self.toolName)
self.transform_lay.addWidget(title_label)
self.empty_label = QLabel("")
self.empty_label.setFixedWidth(80)
self.empty_label1 = QLabel("")
self.empty_label1.setFixedWidth(80)
self.empty_label2 = QLabel("")
self.empty_label2.setFixedWidth(80)
self.transform_lay.addWidget(self.empty_label)
## Rotate Title
rotate_title_label = QLabel("<font size=3><b>%s</b></font>" %
self.rotateName)
self.transform_lay.addWidget(rotate_title_label)
## Form Layout
form_layout = QFormLayout()
self.transform_lay.addLayout(form_layout)
self.rotate_entry = FCEntry()
self.rotate_entry.setFixedWidth(70)
self.rotate_entry.setAlignment(QtCore.Qt.AlignRight
| QtCore.Qt.AlignVCenter)
self.rotate_label = QLabel("Angle Rotation:")
self.rotate_label.setToolTip("Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion.")
self.rotate_label.setFixedWidth(80)
self.rotate_button = FCButton()
self.rotate_button.set_value("Rotate")
self.rotate_button.setToolTip(
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n")
self.rotate_button.setFixedWidth(70)
form_layout.addRow(self.rotate_label, self.rotate_entry)
form_layout.addRow(self.empty_label, self.rotate_button)
self.transform_lay.addWidget(self.empty_label1)
## Skew Title
skew_title_label = QLabel("<font size=3><b>%s</b></font>" %
self.skewName)
self.transform_lay.addWidget(skew_title_label)
## Form Layout
form1_layout = QFormLayout()
self.transform_lay.addLayout(form1_layout)
self.skewx_entry = FCEntry()
self.skewx_entry.setAlignment(QtCore.Qt.AlignRight
| QtCore.Qt.AlignVCenter)
self.skewx_entry.setFixedWidth(70)
self.skewx_label = QLabel("Angle SkewX:")
self.skewx_label.setToolTip("Angle for Skew action, in degrees.\n"
"Float number between -360 and 359.")
self.skewx_label.setFixedWidth(80)
self.skewx_button = FCButton()
self.skewx_button.set_value("Skew_X")
self.skewx_button.setToolTip(
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n")
self.skewx_button.setFixedWidth(70)
self.skewy_entry = FCEntry()
self.skewy_entry.setAlignment(QtCore.Qt.AlignRight
| QtCore.Qt.AlignVCenter)
self.skewy_entry.setFixedWidth(70)
self.skewy_label = QLabel("Angle SkewY:")
self.skewy_label.setToolTip("Angle for Skew action, in degrees.\n"
"Float number between -360 and 359.")
self.skewy_label.setFixedWidth(80)
self.skewy_button = FCButton()
self.skewy_button.set_value("Skew_Y")
self.skewy_button.setToolTip(
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n")
self.skewy_button.setFixedWidth(70)
form1_layout.addRow(self.skewx_label, self.skewx_entry)
form1_layout.addRow(self.empty_label, self.skewx_button)
form1_layout.addRow(self.skewy_label, self.skewy_entry)
form1_layout.addRow(self.empty_label, self.skewy_button)
self.transform_lay.addWidget(self.empty_label2)
## Flip Title
flip_title_label = QLabel("<font size=3><b>%s</b></font>" %
self.flipName)
self.transform_lay.addWidget(flip_title_label)
## Form Layout
form2_layout = QFormLayout()
self.transform_lay.addLayout(form2_layout)
self.flipx_button = FCButton()
self.flipx_button.set_value("Flip_X")
self.flipx_button.setToolTip(
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n ")
self.flipx_button.setFixedWidth(70)
self.flipy_button = FCButton()
self.flipy_button.set_value("Flip_Y")
self.flipy_button.setToolTip(
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n ")
self.flipy_button.setFixedWidth(70)
form2_layout.setSpacing(16)
form2_layout.addRow(self.flipx_button, self.flipy_button)
self.transform_lay.addStretch()
## Signals
self.rotate_button.clicked.connect(self.on_rotate)
self.skewx_button.clicked.connect(self.on_skewx)
self.skewy_button.clicked.connect(self.on_skewy)
self.flipx_button.clicked.connect(self.on_flipx)
self.flipy_button.clicked.connect(self.on_flipy)
self.rotate_entry.returnPressed.connect(self.on_rotate)
self.skewx_entry.returnPressed.connect(self.on_skewx)
self.skewy_entry.returnPressed.connect(self.on_skewy)
## Initialize form
self.rotate_entry.set_value('0')
self.skewx_entry.set_value('0')
self.skewy_entry.set_value('0')
def on_rotate(self):
value = float(self.rotate_entry.get_value())
self.on_rotate_action(value)
return
def on_flipx(self):
self.on_flip("Y")
return
def on_flipy(self):
self.on_flip("X")
return
def on_skewx(self):
value = float(self.skewx_entry.get_value())
self.on_skew("X", value)
return
def on_skewy(self):
value = float(self.skewy_entry.get_value())
self.on_skew("Y", value)
return
def on_rotate_action(self, num):
obj_list = self.app.collection.get_selected()
xminlist = []
yminlist = []
xmaxlist = []
ymaxlist = []
if not obj_list:
self.app.inform.emit("WARNING: No object selected.")
msg = "Please Select an object to rotate!"
warningbox = QtGui.QMessageBox()
warningbox.setText(msg)
warningbox.setWindowTitle("Warning ...")
warningbox.setWindowIcon(QtGui.QIcon('share/warning.png'))
warningbox.setStandardButtons(QtGui.QMessageBox.Ok)
warningbox.setDefaultButton(QtGui.QMessageBox.Ok)
warningbox.exec_()
else:
try:
# first get a bounding box to fit all
for obj in obj_list:
xmin, ymin, xmax, ymax = obj.bounds()
xminlist.append(xmin)
yminlist.append(ymin)
xmaxlist.append(xmax)
ymaxlist.append(ymax)
# get the minimum x,y and maximum x,y for all objects selected
xminimal = min(xminlist)
yminimal = min(yminlist)
xmaximal = max(xmaxlist)
ymaximal = max(ymaxlist)
for sel_obj in obj_list:
px = 0.5 * (xminimal + xmaximal)
py = 0.5 * (yminimal + ymaximal)
sel_obj.rotate(-num, point=(px, py))
sel_obj.plot()
self.app.inform.emit('Object was rotated ...')
except Exception as e:
self.app.inform.emit(
"[ERROR] Due of %s, rotation movement was not executed." %
str(e))
raise
def on_flip(self, axis):
obj_list = self.app.collection.get_selected()
xminlist = []
yminlist = []
xmaxlist = []
ymaxlist = []
if not obj_list:
self.app.inform.emit("WARNING: No object selected.")
msg = "Please Select an object to flip!"
warningbox = QtGui.QMessageBox()
warningbox.setText(msg)
warningbox.setWindowTitle("Warning ...")
warningbox.setWindowIcon(QtGui.QIcon('share/warning.png'))
warningbox.setStandardButtons(QtGui.QMessageBox.Ok)
warningbox.setDefaultButton(QtGui.QMessageBox.Ok)
warningbox.exec_()
return
else:
try:
# first get a bounding box to fit all
for obj in obj_list:
xmin, ymin, xmax, ymax = obj.bounds()
xminlist.append(xmin)
yminlist.append(ymin)
xmaxlist.append(xmax)
ymaxlist.append(ymax)
# get the minimum x,y and maximum x,y for all objects selected
xminimal = min(xminlist)
yminimal = min(yminlist)
xmaximal = max(xmaxlist)
ymaximal = max(ymaxlist)
px = 0.5 * (xminimal + xmaximal)
py = 0.5 * (yminimal + ymaximal)
# execute mirroring
for obj in obj_list:
if axis is 'X':
obj.mirror('X', [px, py])
obj.plot()
self.app.inform.emit('Flipped on the Y axis ...')
elif axis is 'Y':
obj.mirror('Y', [px, py])
obj.plot()
self.app.inform.emit('Flipped on the X axis ...')
except Exception as e:
self.app.inform.emit(
"[ERROR] Due of %s, Flip action was not executed.")
raise
def on_skew(self, axis, num):
obj_list = self.app.collection.get_selected()
xminlist = []
yminlist = []
if not obj_list:
self.app.inform.emit("WARNING: No object selected.")
msg = "Please Select an object to skew/shear!"
warningbox = QtGui.QMessageBox()
warningbox.setText(msg)
warningbox.setWindowTitle("Warning ...")
warningbox.setWindowIcon(QtGui.QIcon('share/warning.png'))
warningbox.setStandardButtons(QtGui.QMessageBox.Ok)
warningbox.setDefaultButton(QtGui.QMessageBox.Ok)
warningbox.exec_()
else:
try:
# first get a bounding box to fit all
for obj in obj_list:
xmin, ymin, xmax, ymax = obj.bounds()
xminlist.append(xmin)
yminlist.append(ymin)
# get the minimum x,y and maximum x,y for all objects selected
xminimal = min(xminlist)
yminimal = min(yminlist)
for obj in obj_list:
if axis is 'X':
obj.skew(num, 0, point=(xminimal, yminimal))
elif axis is 'Y':
obj.skew(0, num, point=(xminimal, yminimal))
obj.plot()
self.app.inform.emit('Object was skewed on %s axis ...' %
str(axis))
except Exception as e:
self.app.inform.emit(
"[ERROR] Due of %s, Skew action was not executed." %
str(e))
raise
# end of file
def __init__(self, parent=None):
OptionsGroupUI.__init__(self, "CNC Job Options", parent=None)
## Plot options
self.plot_options_label = QLabel("<b>Plot Options:</b>")
self.layout.addWidget(self.plot_options_label)
grid0 = QGridLayout()
self.layout.addLayout(grid0)
# Plot CB
# self.plot_cb = QtGui.QCheckBox('Plot')
self.plot_cb = FCCheckBox('Plot')
self.plot_cb.setToolTip("Plot (show) this object.")
grid0.addWidget(self.plot_cb, 0, 0)
# Tool dia for plot
tdlabel = QLabel('Tool dia:')
tdlabel.setToolTip("Diameter of the tool to be\n"
"rendered in the plot.")
grid0.addWidget(tdlabel, 1, 0)
self.tooldia_entry = LengthEntry()
grid0.addWidget(self.tooldia_entry, 1, 1)
## Export G-Code
self.export_gcode_label = QLabel("<b>Export G-Code:</b>")
self.export_gcode_label.setToolTip("Export and save G-Code to\n"
"make this object to a file.")
self.layout.addWidget(self.export_gcode_label)
# Prepend to G-Code
prependlabel = QLabel('Prepend to G-Code:')
prependlabel.setToolTip(
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file.")
self.layout.addWidget(prependlabel)
self.prepend_text = FCTextArea()
self.layout.addWidget(self.prepend_text)
# Append text to G-Code
appendlabel = QLabel('Append to G-Code:')
appendlabel.setToolTip("Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)")
self.layout.addWidget(appendlabel)
self.append_text = FCTextArea()
self.layout.addWidget(self.append_text)
# Dwell
grid1 = QGridLayout()
self.layout.addLayout(grid1)
dwelllabel = QLabel('Dwell:')
dwelllabel.setToolTip("Pause to allow the spindle to reach its\n"
"speed before cutting.")
dwelltime = QLabel('Duration [sec.]:')
dwelltime.setToolTip("Number of second to dwell.")
self.dwell_cb = FCCheckBox()
self.dwelltime_cb = FCEntry()
grid1.addWidget(dwelllabel, 0, 0)
grid1.addWidget(self.dwell_cb, 0, 1)
grid1.addWidget(dwelltime, 1, 0)
grid1.addWidget(self.dwelltime_cb, 1, 1)
def __init__(self, parent=None):
OptionsGroupUI.__init__(self, "Geometry Options", parent=parent)
## Plot options
self.plot_options_label = QLabel("<b>Plot Options:</b>")
self.layout.addWidget(self.plot_options_label)
# Plot CB
self.plot_cb = FCCheckBox(label='Plot')
self.plot_cb.setToolTip("Plot (show) this object.")
self.layout.addWidget(self.plot_cb)
# ------------------------------
## Create CNC Job
# ------------------------------
self.cncjob_label = QLabel('<b>Create CNC Job:</b>')
self.cncjob_label.setToolTip("Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object.")
self.layout.addWidget(self.cncjob_label)
grid1 = QGridLayout()
self.layout.addLayout(grid1)
cutzlabel = QLabel('Cut Z:')
cutzlabel.setToolTip("Cutting depth (negative)\n"
"below the copper surface.")
grid1.addWidget(cutzlabel, 0, 0)
self.cutz_entry = LengthEntry()
grid1.addWidget(self.cutz_entry, 0, 1)
# Travel Z
travelzlabel = QLabel('Travel Z:')
travelzlabel.setToolTip("Height of the tool when\n"
"moving without cutting.")
grid1.addWidget(travelzlabel, 1, 0)
self.travelz_entry = LengthEntry()
grid1.addWidget(self.travelz_entry, 1, 1)
# Feedrate
frlabel = QLabel('Feed Rate:')
frlabel.setToolTip("Cutting speed in the XY\n"
"plane in units per minute")
grid1.addWidget(frlabel, 2, 0)
self.cncfeedrate_entry = LengthEntry()
grid1.addWidget(self.cncfeedrate_entry, 2, 1)
# Tooldia
tdlabel = QLabel('Tool dia:')
tdlabel.setToolTip("The diameter of the cutting\n"
"tool (just for display).")
grid1.addWidget(tdlabel, 3, 0)
self.cnctooldia_entry = LengthEntry()
grid1.addWidget(self.cnctooldia_entry, 3, 1)
spdlabel = QLabel('Spindle speed:')
spdlabel.setToolTip("Speed of the spindle\n" "in RPM (optional)")
grid1.addWidget(spdlabel, 4, 0)
self.cncspindlespeed_entry = IntEntry(allow_empty=True)
grid1.addWidget(self.cncspindlespeed_entry, 4, 1)
# ------------------------------
## Paint area
# ------------------------------
self.paint_label = QLabel('<b>Paint Area:</b>')
self.paint_label.setToolTip("Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon.")
self.layout.addWidget(self.paint_label)
grid2 = QGridLayout()
self.layout.addLayout(grid2)
# Tool dia
ptdlabel = QLabel('Tool dia:')
ptdlabel.setToolTip("Diameter of the tool to\n"
"be used in the operation.")
grid2.addWidget(ptdlabel, 0, 0)
self.painttooldia_entry = LengthEntry()
grid2.addWidget(self.painttooldia_entry, 0, 1)
# Overlap
ovlabel = QLabel('Overlap:')
ovlabel.setToolTip("How much (fraction) of the tool\n"
"width to overlap each tool pass.")
grid2.addWidget(ovlabel, 1, 0)
self.paintoverlap_entry = LengthEntry()
grid2.addWidget(self.paintoverlap_entry, 1, 1)
# Margin
marginlabel = QLabel('Margin:')
marginlabel.setToolTip("Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted.")
grid2.addWidget(marginlabel, 2, 0)
self.paintmargin_entry = LengthEntry()
grid2.addWidget(self.paintmargin_entry, 2, 1)
# Method
methodlabel = QLabel('Method:')
methodlabel.setToolTip("Algorithm to paint the polygon:<BR>"
"<B>Standard</B>: Fixed step inwards.<BR>"
"<B>Seed-based</B>: Outwards from seed.")
grid2.addWidget(methodlabel, 3, 0)
self.paintmethod_combo = RadioSet([{
"label": "Standard",
"value": "standard"
}, {
"label": "Seed-based",
"value": "seed"
}, {
"label": "Straight lines",
"value": "lines"
}],
orientation='vertical')
grid2.addWidget(self.paintmethod_combo, 3, 1)
# Connect lines
pathconnectlabel = QLabel("Connect:")
pathconnectlabel.setToolTip("Draw lines between resulting\n"
"segments to minimize tool lifts.")
grid2.addWidget(pathconnectlabel, 4, 0)
self.pathconnect_cb = FCCheckBox()
grid2.addWidget(self.pathconnect_cb, 4, 1)
# Paint contour
contourlabel = QLabel("Contour:")
contourlabel.setToolTip("Cut around the perimeter of the polygon\n"
"to trim rough edges.")
grid2.addWidget(contourlabel, 5, 0)
self.contour_cb = FCCheckBox()
grid2.addWidget(self.contour_cb, 5, 1)
# Polygon selection
selectlabel = QLabel('Selection:')
selectlabel.setToolTip("How to select the polygons to paint.")
grid2.addWidget(selectlabel, 6, 0)
# grid3 = QGridLayout()
self.selectmethod_combo = RadioSet([
{
"label": "Single",
"value": "single"
},
{
"label": "All",
"value": "all"
},
# {"label": "Rectangle", "value": "rectangle"}
])
grid2.addWidget(self.selectmethod_combo, 6, 1)
def __init__(self, parent=None):
OptionsGroupUI.__init__(self, "Excellon Options", parent=parent)
## Plot options
self.plot_options_label = QLabel("<b>Plot Options:</b>")
self.layout.addWidget(self.plot_options_label)
grid0 = QGridLayout()
self.layout.addLayout(grid0)
self.plot_cb = FCCheckBox(label='Plot')
self.plot_cb.setToolTip("Plot (show) this object.")
grid0.addWidget(self.plot_cb, 0, 0)
self.solid_cb = FCCheckBox(label='Solid')
self.solid_cb.setToolTip("Solid circles.")
grid0.addWidget(self.solid_cb, 0, 1)
## Create CNC Job
self.cncjob_label = QLabel('<b>Create CNC Job</b>')
self.cncjob_label.setToolTip("Create a CNC Job object\n"
"for this drill object.")
self.layout.addWidget(self.cncjob_label)
grid1 = QGridLayout()
self.layout.addLayout(grid1)
cutzlabel = QLabel('Cut Z:')
cutzlabel.setToolTip("Drill depth (negative)\n"
"below the copper surface.")
grid1.addWidget(cutzlabel, 0, 0)
self.cutz_entry = LengthEntry()
grid1.addWidget(self.cutz_entry, 0, 1)
travelzlabel = QLabel('Travel Z:')
travelzlabel.setToolTip("Tool height when travelling\n"
"across the XY plane.")
grid1.addWidget(travelzlabel, 1, 0)
self.travelz_entry = LengthEntry()
grid1.addWidget(self.travelz_entry, 1, 1)
frlabel = QLabel('Feed rate:')
frlabel.setToolTip("Tool speed while drilling\n"
"(in units per minute).")
grid1.addWidget(frlabel, 2, 0)
self.feedrate_entry = LengthEntry()
grid1.addWidget(self.feedrate_entry, 2, 1)
toolchangezlabel = QLabel('Toolchange Z:')
toolchangezlabel.setToolTip("Tool Z where user can change drill bit\n")
grid1.addWidget(toolchangezlabel, 3, 0)
self.toolchangez_entry = LengthEntry()
grid1.addWidget(self.toolchangez_entry, 3, 1)
spdlabel = QLabel('Spindle speed:')
spdlabel.setToolTip("Speed of the spindle\n" "in RPM (optional)")
grid1.addWidget(spdlabel, 4, 0)
self.spindlespeed_entry = IntEntry(allow_empty=True)
grid1.addWidget(self.spindlespeed_entry, 4, 1)
#### Milling Holes ####
self.mill_hole_label = QLabel('<b>Mill Holes</b>')
self.mill_hole_label.setToolTip("Create Geometry for milling holes.")
self.layout.addWidget(self.mill_hole_label)
grid1 = QGridLayout()
self.layout.addLayout(grid1)
tdlabel = QLabel('Tool dia:')
tdlabel.setToolTip("Diameter of the cutting tool.")
grid1.addWidget(tdlabel, 0, 0)
self.tooldia_entry = LengthEntry()
grid1.addWidget(self.tooldia_entry, 0, 1)
def __init__(self, parent=None):
OptionsGroupUI.__init__(self, "Gerber Options", parent=parent)
## Plot options
self.plot_options_label = QLabel("<b>Plot Options:</b>")
self.layout.addWidget(self.plot_options_label)
grid0 = QGridLayout()
self.layout.addLayout(grid0)
# Plot CB
self.plot_cb = FCCheckBox(label='Plot')
self.plot_options_label.setToolTip("Plot (show) this object.")
grid0.addWidget(self.plot_cb, 0, 0)
# Solid CB
self.solid_cb = FCCheckBox(label='Solid')
self.solid_cb.setToolTip("Solid color polygons.")
grid0.addWidget(self.solid_cb, 0, 1)
# Multicolored CB
self.multicolored_cb = FCCheckBox(label='Multicolored')
self.multicolored_cb.setToolTip("Draw polygons in different colors.")
grid0.addWidget(self.multicolored_cb, 0, 2)
## Isolation Routing
self.isolation_routing_label = QLabel("<b>Isolation Routing:</b>")
self.isolation_routing_label.setToolTip(
"Create a Geometry object with\n"
"toolpaths to cut outside polygons.")
self.layout.addWidget(self.isolation_routing_label)
grid1 = QGridLayout()
self.layout.addLayout(grid1)
tdlabel = QLabel('Tool dia:')
tdlabel.setToolTip("Diameter of the cutting tool.")
grid1.addWidget(tdlabel, 0, 0)
self.iso_tool_dia_entry = LengthEntry()
grid1.addWidget(self.iso_tool_dia_entry, 0, 1)
passlabel = QLabel('Width (# passes):')
passlabel.setToolTip("Width of the isolation gap in\n"
"number (integer) of tool widths.")
grid1.addWidget(passlabel, 1, 0)
self.iso_width_entry = IntEntry()
grid1.addWidget(self.iso_width_entry, 1, 1)
overlabel = QLabel('Pass overlap:')
overlabel.setToolTip("How much (fraction of tool width)\n"
"to overlap each pass.")
grid1.addWidget(overlabel, 2, 0)
self.iso_overlap_entry = FloatEntry()
grid1.addWidget(self.iso_overlap_entry, 2, 1)
self.combine_passes_cb = FCCheckBox(label='Combine Passes')
self.combine_passes_cb.setToolTip("Combine all passes into one object")
grid1.addWidget(self.combine_passes_cb, 3, 0)
## Board cuttout
self.board_cutout_label = QLabel("<b>Board cutout:</b>")
self.board_cutout_label.setToolTip("Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board.")
self.layout.addWidget(self.board_cutout_label)
grid2 = QGridLayout()
self.layout.addLayout(grid2)
tdclabel = QLabel('Tool dia:')
tdclabel.setToolTip("Diameter of the cutting tool.")
grid2.addWidget(tdclabel, 0, 0)
self.cutout_tooldia_entry = LengthEntry()
grid2.addWidget(self.cutout_tooldia_entry, 0, 1)
marginlabel = QLabel('Margin:')
marginlabel.setToolTip("Distance from objects at which\n"
"to draw the cutout.")
grid2.addWidget(marginlabel, 1, 0)
self.cutout_margin_entry = LengthEntry()
grid2.addWidget(self.cutout_margin_entry, 1, 1)
gaplabel = QLabel('Gap size:')
gaplabel.setToolTip("Size of the gaps in the toolpath\n"
"that will remain to hold the\n"
"board in place.")
grid2.addWidget(gaplabel, 2, 0)
self.cutout_gap_entry = LengthEntry()
grid2.addWidget(self.cutout_gap_entry, 2, 1)
gapslabel = QLabel('Gaps:')
gapslabel.setToolTip("Where to place the gaps, Top/Bottom\n"
"Left/Rigt, or on all 4 sides.")
grid2.addWidget(gapslabel, 3, 0)
self.gaps_radio = RadioSet([{
'label': '2 (T/B)',
'value': 'tb'
}, {
'label': '2 (L/R)',
'value': 'lr'
}, {
'label': '4',
'value': '4'
}])
grid2.addWidget(self.gaps_radio, 3, 1)
## Non-copper regions
self.noncopper_label = QLabel("<b>Non-copper regions:</b>")
self.noncopper_label.setToolTip("Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region.")
self.layout.addWidget(self.noncopper_label)
grid3 = QGridLayout()
self.layout.addLayout(grid3)
# Margin
bmlabel = QLabel('Boundary Margin:')
bmlabel.setToolTip("Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance.")
grid3.addWidget(bmlabel, 0, 0)
self.noncopper_margin_entry = LengthEntry()
grid3.addWidget(self.noncopper_margin_entry, 0, 1)
# Rounded corners
self.noncopper_rounded_cb = FCCheckBox(label="Rounded corners")
self.noncopper_rounded_cb.setToolTip(
"Creates a Geometry objects with polygons\n"
"covering the copper-free areas of the PCB.")
grid3.addWidget(self.noncopper_rounded_cb, 1, 0, 1, 2)
## Bounding box
self.boundingbox_label = QLabel('<b>Bounding Box:</b>')
self.layout.addWidget(self.boundingbox_label)
grid4 = QGridLayout()
self.layout.addLayout(grid4)
bbmargin = QLabel('Boundary Margin:')
bbmargin.setToolTip("Distance of the edges of the box\n"
"to the nearest polygon.")
grid4.addWidget(bbmargin, 0, 0)
self.bbmargin_entry = LengthEntry()
grid4.addWidget(self.bbmargin_entry, 0, 1)
self.bbrounded_cb = FCCheckBox(label="Rounded corners")
self.bbrounded_cb.setToolTip("If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin.")
grid4.addWidget(self.bbrounded_cb, 1, 0, 1, 2)
