ReadLCOutOfCluster = CaloReadLCOutOfClusterFile("ReadLCOutOfCluster")
ReadLCOutOfCluster.LCOutOfClusterFileName = inFileName
ReadLCOutOfCluster.CorrectionKey="OOCCorrection"
topSequence += ReadLCOutOfCluster
# Number of events to be processed (default is 10)
theApp.EvtMax = 1
AthenaPoolCnvSvc = Service( "AthenaPoolCnvSvc" )
from RegistrationServices.OutputConditionsAlg import OutputConditionsAlg
myOCA=OutputConditionsAlg("myOCA",outFileName)
# List of objects container type#key#foldername
myOCA.ObjectList = ["CaloLocalHadCoeff#OOCCorrection#/CALO/HadCalibration/CaloOutOfCluster"]
myOCA.WriteIOV = True
myOCA.IOVTagList = ["CaloHadOOCCorr2-CSC05-BERT" ]
myOCA.OutputLevel= Lvl.DEBUG
# Set output level threshold (2=DEBUG, 3=INFO, 4=WARNING, 5=ERROR, 6=FATAL )
MessageSvc = Service( "MessageSvc" )
MessageSvc.OutputLevel = Lvl.INFO
DetectorStore = svcMgr.DetectorStore
DetectorStore.Dump = TRUE
DetectorStore.OutputLevel = Lvl.INFO
IOVDbSvc = Service( "IOVDbSvc" )
IOVDbSvc.OutputLevel = Lvl.INFO
svcMgr.IOVDbSvc.dbConnection = "sqlite://X;schema=myOOC05BERT200.db;dbname=OFLP200"
L1CaloFolderList += ["/TRIGGER/L1Calo/Calibration/PprChanCalib"]
L1CaloFolderList += ["/TRIGGER/L1Calo/Calibration/PpmDeadChannels"]
for l1calofolder in L1CaloFolderList:
if not conddb.folderRequested(l1calofolder):
conddb.addFolder("", L1CaloDbConnection + l1calofolder + L1CaloDbTag)
svcMgr.IOVDbSvc.overrideTags += [
"<prefix>/CALO/Identifier/CaloTTOnOffIdMapAtlas</prefix> <tag>CALOIdentifierCaloTTOnOffIdMapAtlas-0002</tag>"
]
# set up tools
from TrigT1CaloCondSvc.TrigT1CaloCondSvcConf import L1CaloCondSvc
ServiceMgr += L1CaloCondSvc()
from TrigT1CaloTools.TrigT1CaloToolsConf import LVL1__L1TriggerTowerTool
ToolSvc += LVL1__L1TriggerTowerTool()
from TrigT1CaloCalibTools.TrigT1CaloCalibToolsConf import L1CaloLArTowerEnergy
ToolSvc += L1CaloLArTowerEnergy()
# configure actual ramp maker algorithm
from TrigT1CaloCalibUtils.TrigT1CaloCalibUtilsConf import L1CaloRampMaker
topSequence += L1CaloRampMaker()
topSequence.L1CaloRampMaker.L1TriggerTowerTool = LVL1__L1TriggerTowerTool()
topSequence.L1CaloRampMaker.DoTile = doTile
topSequence.L1CaloRampMaker.DoLAr = doLAr
# configure writing of pool files
from RegistrationServices.OutputConditionsAlg import OutputConditionsAlg
outputConditionsAlg = OutputConditionsAlg("outputConditionsAlg",
"L1CaloRampData.pool.root")
outputConditionsAlg.ObjectList = ["L1CaloRampDataContainer"]
outputConditionsAlg.WriteIOV = False
SpecialPixelMapSvc.RegisterCallback = False
SpecialPixelMapSvc.OutputFolder = "/PIXEL/PixMapOverlay"
### configure OutputConditionsAlg
from RegistrationServices.OutputConditionsAlg import OutputConditionsAlg
OutputConditionsAlg = OutputConditionsAlg("OutputConditionsAlg",
"PixMapOverlay.root")
OutputConditionsAlg.ObjectList = [
"CondAttrListCollection#" + SpecialPixelMapSvc.OutputFolder
]
OutputConditionsAlg.WriteIOV = True
#OutputConditionsAlg.Run1=1
#OutputConditionsAlg.LB1=4
#OutputConditionsAlg.Run2=1
#OutputConditionsAlg.LB2=9
OutputConditionsAlg.IOVTagList = ["PixMapOverlay-Test-00"]
### configure IOVRegistrationSvc
from RegistrationServices.RegistrationServicesConf import IOVRegistrationSvc
ServiceMgr += IOVRegistrationSvc()
regSvc = ServiceMgr.IOVRegistrationSvc
# saturating channels
0x7120203: 100
#0x7120203 : 100, 0x6170c03 : 50, 0x6150b02 : 100, 0x6180d03 : 150, 0x61b0f02 : 100, 0x71d0d02 : 150,
#0x61c0a00 : 100, 0x6160f03 : 150, 0x6110901 : 150, 0x6140c02 : 150, 0x61a0e03 : 150, 0x61a0103 : 150,
#0x61b0f00 : 150, 0x61b0f01 : 150
}
# configure fitting algorithm
topSequence += CfgMgr.L1CaloLinearCalibration()
# configure writing of L1CaloRampData.pool.root
from RegistrationServices.OutputConditionsAlg import OutputConditionsAlg
outputConditionsAlg = OutputConditionsAlg("outputConditionsAlg",
"L1CaloRampData.pool.root")
outputConditionsAlg.ObjectList = ["L1CaloRampDataContainer"]
outputConditionsAlg.WriteIOV = False
# configure writing of calib database
EnergyScanResultOutput = OutputConditionsAlg("EnergyScanResultOutput",
"dummy.root")
EnergyScanResultOutput.ObjectList = [
"CondAttrListCollection#/TRIGGER/L1Calo/V1/Results/EnergyScanResults",
"AthenaAttributeList#/TRIGGER/L1Calo/V1/Results/EnergyScanRunInfo"
]
EnergyScanResultOutput.WriteIOV = True
EnergyScanResultOutput.Run1 = GetRunNumber()
svcMgr.IOVDbSvc.dbConnection = "sqlite://;schema=energyscanresults.sqlite;dbname=L1CALO"
# configure writing of additional files for the calibration gui
topSequence += CfgMgr.L1CaloDumpRampData(RootStreamName="RAMPDATA")
#from TrigT1CaloCalibUtils.L1CaloDumpRampDataAlgorithm import L1CaloDumpRampDataAlgorithm
from RegistrationServices.OutputConditionsAlg import OutputConditionsAlg
OutCondAlg = OutputConditionsAlg("OutCondAlg", "dummy.root")
# List of things to be written.
# Make sure that only the folders you actually want to write are
# in this list. If something is in this list, and isn't in
# the calibration file, the entire job will fail.
prefix = "CondAttrListCollection#"
for folder in FoldersToWrite:
OutCondAlg.ObjectList += [prefix + folder]
#Taglist must be in same order as folder list!
OutCondAlg.IOVTagList = tagsToWrite
#Write out IOV
OutCondAlg.WriteIOV = True
# set the interval of validity for the file here
# putting nothing for Run2 (uppser limit) falls back on default
#which is to be valid for all run/event
OutCondAlg.Run1 = IOVRunStart
#OutCondAlg.Event1=0
if (IOVRunEnd > 0):
OutCondAlg.Run2 = IOVRunEnd #If not specified, goes to Infinitity
#OutCondAlg.Event2=9999
##############
from IOVDbSvc.CondDB import conddb
conddb.setGlobalTag(CoolGlobalTag)
if (forceRunNumber > 0):
Service("IOVDbSvc").forceRunNumber = forceRunNumber
Service("IOVDbSvc").forceLumiblockNumber = 1
# configure actual db maker algorithm
from TrigT1CaloCalibUtils.TrigT1CaloCalibUtilsConf import L1CaloHVCorrectionsForDB
topSequence += L1CaloHVCorrectionsForDB()
#from LArRecUtils.LArHVCorrToolDefault import LArHVCorrToolDefault
#theLArHVCorrTool = LArHVCorrToolDefault()
#ToolSvc += theLArHVCorrTool
topSequence.L1CaloHVCorrectionsForDB.LArHVCorrTool = theLArHVCorrTool
# configure writing of calib database
from RegistrationServices.OutputConditionsAlg import OutputConditionsAlg
HVCorrectionsOutput = OutputConditionsAlg("HVCorrectionsOutput", "dummy.root")
HVCorrectionsOutput.ObjectList = [
"CondAttrListCollection#/TRIGGER/L1Calo/V1/Results/RxLayers",
"CondAttrListCollection#/TRIGGER/L1Calo/V1/Results/HVCorrections"
]
HVCorrectionsOutput.WriteIOV = True
HVCorrectionsOutput.Run1 = RunNumber
svcMgr.IOVDbSvc.dbConnection = "sqlite://;schema=hvcorrections.sqlite;dbname=L1CALO"
#from LArCalibTools.LArCalibToolsConf import LArHVScaleCorr2Ntuple
#theLArHVScaleCorr2Ntuple = LArHVScaleCorr2Ntuple("LArHVScaleCorr2Ntuple")
#theLArHVScaleCorr2Ntuple.AddFEBTempInfo = False
#topSequence += theLArHVScaleCorr2Ntuple
#from LArCalibTools.LArCalibToolsConf import LArWFParams2Ntuple
#LArWFParams2Ntuple = LArWFParams2Ntuple("LArWFParams2Ntuple")
#LArWFParams2Ntuple.DumpTdrift = True
#topSequence += LArWFParams2Ntuple
#theApp.HistogramPersistency = "ROOT"
#from GaudiSvc.GaudiSvcConf import NTupleSvc
#svcMgr += NTupleSvc()
0x7100601 : 150, 0x61f0d00 : 150, 0x61f0d01 : 150,
# saturating channels
0x7120203 : 100
#0x7120203 : 100, 0x6170c03 : 50, 0x6150b02 : 100, 0x6180d03 : 150, 0x61b0f02 : 100, 0x71d0d02 : 150,
#0x61c0a00 : 100, 0x6160f03 : 150, 0x6110901 : 150, 0x6140c02 : 150, 0x61a0e03 : 150, 0x61a0103 : 150,
#0x61b0f00 : 150, 0x61b0f01 : 150
}
# configure fitting algorithm
topSequence += CfgMgr.L1CaloLinearCalibration()
# configure writing of L1CaloRampData.pool.root
from RegistrationServices.OutputConditionsAlg import OutputConditionsAlg
outputConditionsAlg = OutputConditionsAlg("outputConditionsAlg", "L1CaloRampData.pool.root")
outputConditionsAlg.ObjectList = ["L1CaloRampDataContainer"]
outputConditionsAlg.WriteIOV = False
# configure writing of calib database
EnergyScanResultOutput = OutputConditionsAlg("EnergyScanResultOutput", "dummy.root")
EnergyScanResultOutput.ObjectList = ["CondAttrListCollection#/TRIGGER/L1Calo/V1/Results/EnergyScanResults",
"AthenaAttributeList#/TRIGGER/L1Calo/V1/Results/EnergyScanRunInfo"]
EnergyScanResultOutput.WriteIOV = True
EnergyScanResultOutput.Run1 = GetRunNumber()
svcMgr.IOVDbSvc.dbConnection="sqlite://;schema=energyscanresults.sqlite;dbname=L1CALO"
# configure writing of additional files for the calibration gui
topSequence += CfgMgr.L1CaloDumpRampData(RootStreamName="RAMPDATA")
#from TrigT1CaloCalibUtils.L1CaloDumpRampDataAlgorithm import L1CaloDumpRampDataAlgorithm
#topSequence += L1CaloDumpRampDataAlgorithm()
# run finetime
print "#########################################################################################################################################"
print "#########################################################################################################################################"
from RegistrationServices.OutputConditionsAlg import OutputConditionsAlg
include("RegistrationServices/RegistrationServices_jobOptions.py")
myOCAHT=OutputConditionsAlg(outputFile=outputFileHT,name="myOCAHT")
myOCAHT.ObjectList=objectListHT
myOCAHT.IOVTagList=tagListHT
myOCAHT.Run1=0
myOCAHT.LB1=0
myOCAHT.Run2=2147483647
myOCAHT.LB2=0
myOCAHT.WriteIOV=True
topSequence+=myOCAHT
from AthenaServices.AthenaServicesConf import AthenaOutputStreamTool
TRTCondStream=AthenaOutputStreamTool('myOCATool')
TRTCondStream.PoolContainerPrefix='ConditionsTree'
TRTCondStream=AthenaOutputStreamTool('myOCAPerTool')
TRTCondStream.PoolContainerPrefix='ConditionsTree'
TRTCondStream=AthenaOutputStreamTool('myOCAHTTool')
TRTCondStream.PoolContainerPrefix='ConditionsTree'
ToolSvc += TRTCondStream
