setDQMDataTier(tier0Config, "DQMIO")
# Define the two default timeouts for reco release
# First timeout is used directly for reco release
# Second timeout is used for the data service PromptReco start check
# (to basically say we started PromptReco even though we haven't)
defaultRecoTimeout = 10 * 60
defaultRecoLockTimeout = 5 * 60
# DQM Server
setDQMUploadUrl(tier0Config, "https://cmsweb.cern.ch/dqm/dev;https://cmsweb-testbed.cern.ch/dqm/offline-test")
# PCL parameters
setPromptCalibrationConfig(tier0Config,
alcaHarvestTimeout = 12*3600,
alcaHarvestDir = "/store/unmerged/tier0_harvest",
conditionUploadTimeout = 18*3600,
dropboxHost = "webcondvm.cern.ch",
validationMode = True)
# Defaults for CMSSW version
defaultCMSSWVersion = "CMSSW_8_0_6"
# Configure ScramArch
setDefaultScramArch(tier0Config, "slc6_amd64_gcc491")
setScramArch(tier0Config, "CMSSW_8_0_0", "slc6_amd64_gcc493")
setScramArch(tier0Config, "CMSSW_8_0_0_patch1", "slc6_amd64_gcc493")
setScramArch(tier0Config, "CMSSW_8_0_0_patch2", "slc6_amd64_gcc493")
setScramArch(tier0Config, "CMSSW_8_0_0_patch3", "slc6_amd64_gcc493")
setScramArch(tier0Config, "CMSSW_8_0_1", "slc6_amd64_gcc493")
setScramArch(tier0Config, "CMSSW_8_0_2", "slc6_amd64_gcc493")
setScramArch(tier0Config, "CMSSW_8_0_3", "slc6_amd64_gcc493")
# set the config version (not really used at the moment)
setConfigVersion(tier0Config, "replace with real version")
# Set global parameters:
# acquisition era
# backfill mode
# data type
setAcquisitionEra(tier0Config, "ExampleConfig_UnitTest")
setBackfill(tier0Config, None)
setBulkDataType(tier0Config, "data")
setBulkDataLocation(tier0Config, "T2_CH_CERN")
setDQMUploadUrl(tier0Config, "https://cmsweb.cern.ch/dqm/dev")
setPromptCalibrationConfig(tier0Config,
alcaHarvestTimeout = 12*3600,
alcaHarvestDir = "/some/afs/dir",
conditionUploadTimeout = 18*3600,
dropboxHost = "webcondvm.cern.ch",
validationMode = True)
# configure ScramArch
setDefaultScramArch(tier0Config, "slc5_amd64_gcc462")
setScramArch(tier0Config, "CMSSW_6_2_4", "slc5_amd64_gcc472")
# setup repack and express version mappings
repackVersionOverride = {
}
expressVersionOverride = {
"CMSSW_5_2_7" : "CMSSW_5_3_14",
}
hltmonVersionOverride = {
"CMSSW_5_2_7" : "CMSSW_5_3_8",
setDQMDataTier(tier0Config, "DQMIO")
# Define the two default timeouts for reco release
# First timeout is used directly for reco release
# Second timeout is used for the data service PromptReco start check
# (to basically say we started PromptReco even though we haven't)
defaultRecoTimeout = 10 * 60
defaultRecoLockTimeout = 5 * 60
# DQM Server
setDQMUploadUrl(tier0Config, "https://cmsweb.cern.ch/dqm/dev;https://cmsweb-testbed.cern.ch/dqm/offline-test")
# PCL parameters
setPromptCalibrationConfig(tier0Config,
alcaHarvestTimeout = 12*3600,
alcaHarvestDir = "/store/unmerged/tier0_harvest",
conditionUploadTimeout = 18*3600,
dropboxHost = "webcondvm.cern.ch",
validationMode = True)
# Defaults for CMSSW version
defaultCMSSWVersion = "CMSSW_9_2_10"
# Configure ScramArch
setDefaultScramArch(tier0Config, "slc6_amd64_gcc530")
setScramArch(tier0Config, "CMSSW_5_3_20", "slc6_amd64_gcc472")
# Configure scenarios
ppScenario = "pp"
cosmicsScenario = "cosmics"
hcalnzsScenario = "hcalnzs"
# set the config version (not really used at the moment)
setConfigVersion(tier0Config, "replace with real version")
# Set global parameters:
# acquisition era
# backfill mode
# data type
setAcquisitionEra(tier0Config, "ExampleConfig_UnitTest")
setBackfill(tier0Config, None)
setBulkDataType(tier0Config, "data")
setBulkDataLocation(tier0Config, "T2_CH_CERN")
setDQMUploadUrl(tier0Config, "https://cmsweb.cern.ch/dqm/dev")
setPromptCalibrationConfig(tier0Config,
alcaHarvestTimeout=12 * 3600,
alcaHarvestDir="/some/afs/dir",
conditionUploadTimeout=18 * 3600,
dropboxHost="webcondvm.cern.ch",
validationMode=True)
# configure ScramArch
setDefaultScramArch(tier0Config, "slc5_amd64_gcc462")
setScramArch(tier0Config, "CMSSW_6_2_4", "slc5_amd64_gcc472")
# setup repack and express version mappings
repackVersionOverride = {}
expressVersionOverride = {
"CMSSW_5_2_7": "CMSSW_5_3_14",
}
hltmonVersionOverride = {
"CMSSW_5_2_7": "CMSSW_5_3_8",
}
# Define the two default timeouts for reco release
# First timeout is used directly for reco release
# Second timeout is used for the data service PromptReco start check
# (to basically say we started PromptReco even though we haven't)
defaultRecoTimeout = 600
defaultRecoLockTimeout = 60
# DQM Server
setDQMUploadUrl(tier0Config, "https://cmsweb.cern.ch/dqm/offline")
# PCL parameters
setPromptCalibrationConfig(
tier0Config,
alcaHarvestTimeout=12 * 3600,
alcaHarvestDir="/afs/cern.ch/user/c/cmsprod/scratch2/tier0_harvest",
conditionUploadTimeout=18 * 3600,
dropboxHost="webcondvm.cern.ch",
validationMode=True)
# Defaults for CMSSW version
defaultCMSSWVersion = "CMSSW_6_2_4"
# Configure ScramArch
setDefaultScramArch(tier0Config, "slc5_amd64_gcc462")
setScramArch(tier0Config, "CMSSW_6_2_4", "slc5_amd64_gcc472")
# Defaults for processing version
defaultProcVersion = 1
expressProcVersion = 1
alcarawProcVersion = 1
setStreamerPNN(tier0Config, streamerPNN)
defaultCMSSWVersion = {
'default': "CMSSW_6_2_4"
}
# Override for DQM data tier
setDQMDataTier(tier0Config, "DQMIO")
# DQM Server
setDQMUploadUrl(tier0Config, "https://cmsweb.cern.ch/dqm/dev")
# PCL parameters
setPromptCalibrationConfig(tier0Config,
alcaHarvestTimeout = 12*3600,
alcaHarvestCondLFNBase = "/store/unmerged/tier0_harvest",
alcaHarvestLumiURL = "root://eoscms.cern.ch//eos/cms/store/unmerged/tier0_harvest",
conditionUploadTimeout = 18*3600,
dropboxHost = "webcondvm.cern.ch",
validationMode = True)
# configure ScramArch
setDefaultScramArch(tier0Config, "slc5_amd64_gcc462")
setScramArch(tier0Config, "CMSSW_6_2_4", "slc5_amd64_gcc472")
# setup repack and express version mappings
repackVersionOverride = {
}
expressVersionOverride = {
"CMSSW_5_2_7": "CMSSW_5_3_14",
}
hltmonVersionOverride = {
setProcessingSite(tier0Config, processingSite)
setStreamerPNN(tier0Config, streamerPNN)
defaultCMSSWVersion = {'default': "CMSSW_6_2_4"}
# Override for DQM data tier
setDQMDataTier(tier0Config, "DQMIO")
# DQM Server
setDQMUploadUrl(tier0Config, "https://cmsweb.cern.ch/dqm/dev")
# PCL parameters
setPromptCalibrationConfig(
tier0Config,
alcaHarvestTimeout=12 * 3600,
alcaHarvestCondLFNBase="/store/unmerged/tier0_harvest",
alcaHarvestLumiURL=
"root://eoscms.cern.ch//eos/cms/store/unmerged/tier0_harvest",
conditionUploadTimeout=18 * 3600,
dropboxHost="webcondvm.cern.ch",
validationMode=True)
# configure ScramArch
setDefaultScramArch(tier0Config, "slc5_amd64_gcc462")
setScramArch(tier0Config, "CMSSW_6_2_4", "slc5_amd64_gcc472")
# setup repack and express version mappings
repackVersionOverride = {}
expressVersionOverride = {
"CMSSW_5_2_7": "CMSSW_5_3_14",
}
hltmonVersionOverride = {
setBulkDataLocation(tier0Config, "T2_CH_CERN")
# Define the two default timeouts for reco release
# First timeout is used directly for reco release
# Second timeout is used for the data service PromptReco start check
# (to basically say we started PromptReco even though we haven't)
defaultRecoTimeout = 600
defaultRecoLockTimeout = 60
# DQM Server
setDQMUploadUrl(tier0Config, "https://cmsweb.cern.ch/dqm/dev")
# PCL parameters
setPromptCalibrationConfig(tier0Config,
alcaHarvestTimeout = 12*3600,
alcaHarvestDir = "/afs/cern.ch/user/c/cmsprod/scratch2/tier0_harvest",
conditionUploadTimeout = 18*3600,
dropboxHost = "webcondvm.cern.ch",
validationMode = True)
# Defaults for CMSSW version
defaultCMSSWVersion = "CMSSW_6_2_4"
# Configure ScramArch
setDefaultScramArch(tier0Config, "slc5_amd64_gcc462")
setScramArch(tier0Config, "CMSSW_6_2_4", "slc5_amd64_gcc472")
# Defaults for processing version
defaultProcVersion = 1
expressProcVersion = 1
alcarawProcVersion = 1
