def parseobj(self,IdString,DataString):
if IdString=="770":
try:
toRet={"PlugPower HearthBeat":1}
except Exception as e:
toRet={"PlugPower HearthBeat":str(e)}
elif IdString=="1F0":
BattVolt = getBytes(DataString, 0, 16) / 100
V_measured = BattVolt
Current = (getBytes(DataString, 2, 16)-65536) / 10
Temperature = getBytes(DataString, 4, 16) / 100
SOC = getBytes(DataString, 1, 8)
toRet = "[0-1] {:3.3f}Volts<br>".format(SOC)
toRet +="[2-3] I:{}Amps<br>".format(Current)
toRet +="[4-5]T:{}C<br>".format(Temperature)
toRet +="[7] SOC:{}%\n{:<80s}{:1.2f}V/cell ".format(SOC, " ", BattVolt / 40)
toRet2 = {"BattVolt" : V_measured,
"Current" : Current,
"Temperature" : Temperature,
"SOC" : SOC
}
"""
def parse(self, IdString, DataString):
if IdString == "226": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
self.isNBL = True
self.isloader = False
lineDesc = ""
toRet = " NBL PLC CMD<br><br>"
toRet = "[0:0] 0x{:04X} Command = {} bit1: brake<br>" + \
lineDesc + "[1,7] 0x{} <br> "
toRet = toRet.format((getBytes(DataString, 0, 8)),
getBytes(DataString, 0, 8), 0)
return toRet
def parse(self,IdString,DataString):
if IdString=="770":
try:
toRet="PlugPower HearthBeat:"
except Exception as e:
toRet="PlugPower HearthBeat "+str(e)
elif IdString=="1F0":
SOC = getBytes(DataString, 1, 8)
decodeing=FCerror
"""FCfulltravel := FuelCell_RX.DATA[2].0;
FClimptravel := FuelCell_RX.DATA[2].1;
FCfullhydr := FuelCell_RX.DATA[2].2;
FClimphydr := FuelCell_RX.DATA[2].3;
FCerror := FuelCell_RX.DATA[0].0;
FCenable := FuelCell_RX.DATA[0].1;
FCloadshed := FuelCell_RX.DATA[0].2;
FCrefuel := FuelCell_RX.DATA[0].3;
FChighwater := FuelCell_RX.DATA[0].4;
FCews := FuelCell_RX.DATA[0].5;
FClowfuel := FuelCell_RX.DATA[0].6;
"""
toRet = "[ 1 ] {} % SOC<br>".format(SOC)
toRet +="[2-3] I:{}Amps<br>".format(Current)
toRet +="[4-5]T:{}C<br>".format(Temperature)
toRet +="[7] SOC:{}%\n{:<80s}{:1.2f}V/cell ".format(SOC, " ", BattVolt / 40)
return toRet
else:
toRet="?"
return toRet
def parse(self, IdString, DataString):
toRet = "GreenCube: "
toRet += " id:0x{:02X}\t".format(int(IdString, 16) & 0x7F)
if IdString in ["19C", "38C"]:
datastr = DataString
SOC = str(int(datastr[0:2], 16))
Status = bin(int(datastr[3:5], 16))[2:].zfill(8)
Voltage = getBytes(DataString, 2, 32)
Current = int(datastr[18:20], 16) + 256 * (int(datastr[21:23], 16))
Current = getBytes(DataString, 6, 16)
toRet = toRet + \
"Batterie 19c SOC(0):" + SOC + \
"\tStatus(1):" + Status + \
"\tVoltage(2-5):" + str(int(1000 * Voltage / 1024) / 1000) + \
"\t\r\nI(6-7):" + str(0 + Current / 15)
elif IdString in ["29C", "48C"]:
datastr = DataString
DisVoltageLimit = int(
datastr[6:8],
16) + 256 * int(datastr[9:11], 16) + 256 * 256 * int(
datastr[12:14], 16) + 256 * 256 * 256 * int(
datastr[15:17], 16)
MaxDisCurrent = int(datastr[0:2],
16) + 256 * (int(datastr[3:5], 16))
Temperature = int(datastr[18:20],
16) + 256 * (int(datastr[21:23], 16))
toRet = toRet + \
"Batterie 29c VMin: " + str(int(1000 * DisVoltageLimit / 1024) / 1000) + \
"\tImax:" + str(MaxDisCurrent / 16) + \
"\tTemp:" + str(Temperature / 8) + \
"\t" + str(getBytes(datastr, 2, 32) / 1024)
elif IdString in ["39C", "28C"]:
toRet = toRet + "Batterie 39c ?:" + str(getBytes(
DataString, 0, 32)) + " == " + str(
getBytes(DataString, 0, 16) / 16)
elif IdString == "71C":
toRet = "GreenCube HB"
else:
toRet += IdString
return toRet
def parse(self, IdString, DataString):
if IdString == "72A":
try:
toRet = "Acuity HearthBeat:"
except Exception as e:
toRet = "Acuity HearthBeat " + str(e)
elif IdString == "1AA":
BattVolt = getBytes(DataString, 0, 16) / 100
V_measured = BattVolt
Current = (getBytes(DataString, 2, 16) - 65536) / 10
Temperature = getBytes(DataString, 4, 16) / 100
SOC = getBytes(DataString, 7, 8)
toRet = "[0-1] {:3.3f}Volts<br>".format(BattVolt)
toRet += "[2-3] I:{}Amps<br>".format(Current)
toRet += "[4-5]T:{}C<br>".format(Temperature)
toRet += "[7] SOC:{}%\n{:<80s}{:1.2f}V/cell ".format(
SOC, " ", BattVolt / 40)
return toRet
elif IdString == "4AA":
ss = getBytes(DataString, 0, 8)
mm = getBytes(DataString, 1, 8)
hh = getBytes(DataString, 2, 8)
Tstr = "{}:{}:{}".format(hh, mm, ss)
return "Real-Time-Clock " + Tstr
elif IdString == "2AA":
return "Acuity BAttery Stats"
else:
toRet = "?"
return toRet
def parse(self, IdString, DataString):
toRet = "NBL Pump :"
# toRet += " 0x{:02X}\t".format(int(IdString, 16) & 0x7F)
lineDesc = toRet
##########################
if IdString == "1A8":
toRet = toRet + "unknown nbl"
elif IdString == "3A8": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
toRet = toRet + "unknown nbl"
elif IdString == "2A8": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
toRet = toRet + " NBL Pump<br>" + \
lineDesc + "[2,3] 0x{:04X} = {}<br>" + \
lineDesc + "[4,5] 0x{:04X} = {}<br> " + \
lineDesc + "[6,7] 0x{:04X} Pump Current = {}<br>"
toRet = toRet.format((getBytes(DataString, 2, 16)),
getBytes(DataString, 2,
16), (getBytes(DataString, 4, 16)),
getBytes(DataString, 4, 16),
(getBytes(DataString, 6, 16)),
getBytes(DataString, 6, 16))
elif IdString == "1A7":
toRet = toRet + " NBL Pump command to Drive<br>"
toRet = toRet + " Pump Status / Fault Flash Code PUmp<br>" \
"""CAN_Pump_hourmeter_ON bit CAN_Pump_status.1<br>
CAN_Pump_Drive_disable bit CAN_Pump_status.2<br>
CAN_Pump_Ignition_protection bit CAN_Pump_status.4<br>
CAN_Belt_hourMeter_ON bit CAN_Pump_status.8<br>
CAN_Pump_faulted_flag bit CAN_Pump_status.16 """
return toRet
def parse(self, IdString, DataString):
if IdString == "72C":
toRet = "HearthBeat ACT "
elif IdString == "22C": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
Volts = getBytes(DataString, 2, 32)
toRet = "ACT msg<br>" \
"[0:1] {} -----------> Charger Status: {} <br>".format(DataString[0:6],DataString[0:6])
toRet += "[2,3,4,5] {} -> Output Voltage: {:2.1f} Volts <br>".format(
DataString[6:18], Volts / 1024)
toRet += "[6,7] {} -----------> Output Current: {:3.1f} Amps".format(
DataString[18:24],
getBytes(DataString, 6, 16) / 16)
elif IdString == "1AC":
#VoltLimit
Volts = int(getBytes(DataString, 2, 32))
Current = getBytes(DataString, 6, 16)
toRet = "ACT ctrl msg<br>" \
"[0-1] {} -------> ??? <br>" \
"[2-5] {} -> MeasuredVolts: {:2.1f} Volts - {:2.1f}V *** /1000 or /1024<br>" \
"[6-7] {} -------> Max_Current : {} Amps".format( DataString[0:6],DataString[6:17],Volts/1000, Volts/1024, DataString[18:26],Current/10)
elif IdString == "2AC":
ChargeStatus = getBytes(DataString, 0, 8)
SOC = getBytes(DataString, 1, 8)
TemperatureH = getBytes(DataString, 2, 8)
TemperatureL = getBytes(DataString, 3, 8)
Voltage = getBytes(DataString, 4, 32)
toRet = "ACT ctrl msg<br>" \
"[ 0 ] {} ----------> Charge_Mode: {}<br>".format(DataString[0:2],ChargeStatus)
toRet += "[ 1 ] {} ----------> Battery_SOC: {}% <br>".format(
DataString[3:5], SOC)
toRet += "[4-7] {} -> Max_Voltage: {:2.1f}V - {:2.1f}V *** /1000 or /1024".format(
DataString[12:24], float(Voltage / 1000),
float(Voltage / 1024))
#print("Voltage: {}".format(float(Voltage/1000)))return toRet
return toRet
def parse(self,IdString,DataString):
toRet =""
if IdString == "2F0":
Voltage=getBytes(DataString,0,16)/10
Current=getBytes(DataString,2,16)
if Current & 0x8000:
Current = (0xFFFF-Current)/10
else:
Current = Current/10
SOC=getBytes(DataString,4,8)
Capacity=getBytes(DataString,5,8)
StatusFlag=getBytes(DataString,6,8)
StatFlag2=getBytes(DataString,7,8)
toRet += "2f0 {}V \t{}Amps \tSOC:{}%\tCapacity:{}\tStatus: {} {}".format(Voltage,Current,SOC,Capacity,StatusFlag,StatFlag2)
elif IdString == "2F1":
CellMaxVolt=getBytes(DataString,0,16)/1000
CellMaxPos=getBytes(DataString,2,16)
CellMinVolt=getBytes(DataString,4,16)/1000
CellMinPos=getBytes(DataString,6,16)
toRet += "2f1 CellMax:{}V idx:{:08b}\t\t\nCellMin:{}V idx:{:08b}".format(CellMaxVolt,CellMaxPos,CellMinVolt,CellMinPos)
elif IdString == "2F2":
CellMaxTemp=getBytes(DataString,0,16)/10
CellMaxPos=getBytes(DataString,2,16)
CellMinTemp=getBytes(DataString,4,16)/10
CellMinPos=getBytes(DataString,6,16)
toRet += "2f2 CellMax:{}C idx:{:08b}\t\t CellMin{}C idx:{:08b}".format(CellMaxTemp,CellMaxPos,CellMinTemp,CellMinPos)
elif IdString == "2F3":
DischargeHours=getBytes(DataString,0,16)
ChargeHours=getBytes(DataString,2,16)
RelayFlags=getBytes(DataString,4,8)
PackSafetyFlag=getBytes(DataString,5,8)
PackStatusFlag=getBytes(DataString,6,8)
PLCFaultCode=getBytes(DataString,7,8)
toRet += "2f3 DiscHrs:{}\tChargeHrs:{} RelayFlags:{}\tSafetyFlags:{} PLC_Fault:{}".format(DischargeHours,ChargeHours,RelayFlags,PackSafetyFlag,PackStatusFlag,PLCFaultCode)
elif IdString == "326":
MaxDiscCurrent = (0x7FFF & getBytes(DataString,0,16))/10
MaxChargeCurrent=getBytes(DataString,2,16)/10
ChargeVoltageRequires = getBytes(DataString,4,16)
ChargerCurrentRequires= getBytes(DataString,6,16)
toRet += "326 MaxDisCurrent:{}\t\tMaxFeedBackCurrent:{}<br>" \
"ChargeVoltageRequires:{} ChargeCurrentRequires:{}".format(MaxDiscCurrent,MaxChargeCurrent,ChargeVoltageRequires,ChargerCurrentRequires)
elif IdString== "189":
toRet += "189 Charger ACInput Current, DOD, SOH, Pack status"
elif IdString== "289":
toRet += "289 sub packs status"
elif IdString== "389":
toRet += "389 System fault code"
elif IdString== "489":
ChargerCurrentDC = getBytes(DataString,4,16)
ChargingRemainingTime = getBytes(DataString,6,16)
toRet += "489"
elif IdString== "2F4":
toRet += "2F4 Heating Status"
elif IdString== "2F5":
toRet += "2F5 software Rev:"+getBytes(DataString,0,8)+'.'+getBytes(DataString,1,8)+'.'+getBytes(DataString,2,8)
elif IdString== "20A":
toRet += "20A "+getBytes(DataString,0,8)+'.'+getBytes(DataString,1,8)+'.'+getBytes(DataString,2,8)
elif IdString== "20B":
toRet += "20B "+getBytes(DataString,0,8)+'.'+getBytes(DataString,1,8)+'.'+getBytes(DataString,2,8)
return toRet
def parse(self, IdString, DataString):
value = getBytes(DataString, 0, -32)
toRet = "CurrentSensor +++: {:>03.3f} Amps ".format(value / 1000)
return toRet
def parse(self, IdString, DataString):
self.IdString = IdString
self.DataString = DataString
toRet = "PUMP :"
#toRet += " 0x{:02X}\t".format(int(IdString, 16) & 0x7F)
lineDesc = toRet
##########################
if IdString == "70B":
toRet = toRet + "HearthBeat"
elif IdString == "8B": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
toRet = toRet + "Emergency"
elif IdString == "20B": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
toRet = toRet + " PLC CMD<br><br>"+\
lineDesc+"[2,3] 0x{:04X} throttle = {}<br>"+ \
lineDesc+"[4,5] 0x{:04X} pump nominalspeed = {}<br> "+ \
lineDesc+"[6,7] 0x{:04X} pump percent = {}<br>"
toRet = toRet.format((getBytes(DataString, 2, 16)),
getBytes(DataString, 2,
16), (getBytes(DataString, 4, 16)),
getBytes(DataString, 4, 16),
(getBytes(DataString, 6, 16)),
getBytes(DataString, 6, 16))
toRet = toRet + " PLC CMD<br><br>"
toRet += "[2,3] 0x{:04X} throttle = {} <br>".format(
self.CanData(2, 16), self.CanData(2, 16))
toRet += "[4,5] 0x{:04X} pump nominalspeed = {} <br>".format(
self.CanData(4, 16), self.CanData(4, 16))
toRet += "[6,7] 0x{:04X} pump percent = {} <br>".format(
self.CanData(6, 16), self.CanData(6, 16))
elif IdString == "30B": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
toRet = toRet + " PLC CMD<br><br>"
elif hex(int("0x" + IdString, 16) & 0x7F0) == "0x180":
toRet = lineDesc + "[0,1] 0x{:04X} inputCurrent = {}<br>" + \
lineDesc + "[4,5] 0x{:04X} motor RPM = {}<br> " + \
lineDesc + "[6,7] 0x{:04X} motorCurrent = {}<br>"
toRet = toRet.format((getBytes(DataString, 2, 16)),
getBytes(DataString, 2,
16), (getBytes(DataString, 4, 16)),
getBytes(DataString, 4, 16),
(getBytes(DataString, 6, 16)),
getBytes(DataString, 6, 16))
elif hex(int("0x" + IdString, 16) & 0x7F0) == "0x280":
toRet = lineDesc + "[0,1] 0x{:04X} R_Input = {}<br>" + \
lineDesc + "[2,3] 0x{:04X} CurtisVoltage = {}<br> " + \
lineDesc + "[4,5] 0x{:04X} Motor Temp = {}<br> " + \
lineDesc + "[6,7] 0x{:04X} Drive Temp = {}<br>"
toRet = toRet.format(
(getBytes(DataString, 0, 16)),
getBytes(DataString, 0, 16), (getBytes(DataString, 2, 16)),
getBytes(DataString, 2, 16), (getBytes(DataString, 4, 16)),
getBytes(DataString, 4, 16), (getBytes(DataString, 6, 16)),
getBytes(DataString, 6, 16))
toRet = " PLC CMD<br><br>"
toRet += "[0,1] 0x{:04X} R_Input = {}<br> ".format(
self.CanData(0, 16), self.CanData(0, 16))
toRet += "[2,3] 0x{:04X} CurtisVoltage = {} V<br> ".format(
self.CanData(2, 16),
self.CanData(2, 16) / 100)
toRet += "[4,5] 0x{:04X} Motor Temp = {} C<br> ".format(
self.CanData(4, 16),
self.CanData(4, 16) / 10)
toRet += "[6,7] 0x{:04X} Drive Temp = {} C<br> ".format(
self.CanData(6, 16),
self.CanData(6, 16) / 10)
"""
From VCL
(* PDO T1 *)
PDO_T1.DATA[2] := WORD_TO_BYTE(INT_TO_WORD(INT_VCLThrottleCommand) AND 16#00FF);
PDO_T1.DATA[3] := WORD_TO_BYTE(SHR(INT_TO_WORD(INT_VCLThrottleCommand) AND 16#FF00,8));
PDO_T1.DATA[4] := WORD_TO_BYTE(W_RegenNominalSpeed AND 16#00FF);
PDO_T1.DATA[5] := WORD_TO_BYTE(SHR(W_RegenNominalSpeed AND 16#FF00,8));
PDO_T1.DATA[6] := WORD_TO_BYTE(W_RegenPercent AND 16#00FF);
PDO_T1.DATA[7] := WORD_TO_BYTE(SHR(W_RegenPercent AND 16#FF00,8));
(* PDO T2 *)
(*PDO_T2.DATA[0] := WORD_TO_BYTE(INT_TO_WORD(G_BatteryCurrent) AND 16#00FF);*)
PDO_T2.DATA[0] := WORD_TO_BYTE(G_BatteryLevel AND 16#00FF);
(*PDO_T2.DATA[1] := WORD_TO_BYTE(SHR(INT_TO_WORD(G_BatteryCurrent) AND 16#FF00,8));*)
PDO_T2.DATA[1] := WORD_TO_BYTE(SHR(G_BatteryLevel AND 16#FF00,8));
"""
# print("toRet:",toRet)
return toRet
def CanData(self, position, type):
return getBytes(self.DataString, position, type)
def parse(self, IdString, DataString):
toRet = "Traction :"
#toRet += " 0x{:02X}\t".format(int(IdString, 16) & 0x7F)
lineDesc = toRet
##########################
if IdString == "70C":
toRet = ""
lineDesc = ""
toRet = toRet + "HB"
elif IdString == "20C": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
toRet = toRet + " PLC CMD<br><br>"+\
lineDesc+"[2:3] 0x{:04X} throttle = {}<br>"+ \
lineDesc+"[4,5] 0x{:04X} pump nominalspeed = {}<br> "+ \
lineDesc+"[6,7] 0x{:04X} pump percent = {}<br>"
toRet = toRet.format((getBytes(DataString, 2, 16)),
getBytes(DataString, 2,
16), (getBytes(DataString, 4, 16)),
getBytes(DataString, 4, 16),
(getBytes(DataString, 6, 16)),
getBytes(DataString, 6, 16))
toRet = toRet + " PLC CMD<br><br>"
elif hex(int("0x" + IdString, 16) & 0x7F0) == "0x180":
toRet = lineDesc + "[0,1] 0x{:04X} inputCurrent = {}<br>" + \
lineDesc + "[4,5] 0x{:04X} motor RPM = {}<br> " + \
lineDesc + "[6,7] 0x{:04X} motorCurrent = {}<br>"
toRet = toRet.format((getBytes(DataString, 2, 16)),
getBytes(DataString, 2,
16), (getBytes(DataString, 4, 16)),
getBytes(DataString, 4, 16),
(getBytes(DataString, 6, 16)),
getBytes(DataString, 6, 16))
elif hex(int("0x" + IdString, 16) & 0x7F0) == "0x280":
toRet = lineDesc + "[0,1] 0x{:04X} R_Input = {}<br>" + \
lineDesc + "[2,3] 0x{:04X} CurtisVoltage = {}<br> " + \
lineDesc + "[4,5] 0x{:04X} Motor Temp = {}<br> " + \
lineDesc + "[6,7] 0x{:04X} Drive Temp = {}<br>"
toRet = toRet.format(
(getBytes(DataString, 0, 16)),
getBytes(DataString, 0, 16), (getBytes(DataString, 2, 16)),
getBytes(DataString, 2, 16), (getBytes(DataString, 4, 16)),
getBytes(DataString, 4, 16), (getBytes(DataString, 6, 16)),
getBytes(DataString, 6, 16))
else:
toRet += " 18C " + IdString + "--" + hex(
int("0x" + IdString, 16)
& 0x7F0) + "<" + hex(int("0x" + IdString, 16) & 0x7F8) + "<"
"""
# 180
F PDO_R1.AVAILABLE>0 THEN
R_InputCurrent := (BYTE_TO_REAL(PDO_R1.DATA[0])+BYTE_TO_REAL(PDO_R1.DATA[1])*256)/10;
IF R_InputCurrent > 3276.8 THEN
R_InputCurrent := REAL_TO_INT(R_InputCurrent - 6553.6);
END_IF
INT_MotorRPM := BYTE_TO_INT(PDO_R1.DATA[4])+BYTE_TO_INT(PDO_R1.DATA[5])*256;
INT_MotorCurrent := (BYTE_TO_INT(PDO_R1.DATA[6])+BYTE_TO_INT(PDO_R1.DATA[7])*256)/10;
ID:280
R_Input1:= (BYTE_TO_REAL(PDO_R2.DATA[0]) + BYTE_TO_REAL(PDO_R2.DATA[1]) * 256) / 9.2;
CurtisVoltage:= (BYTE_TO_REAL(PDO_R2.DATA[2]) + BYTE_TO_REAL(PDO_R2.DATA[3]) * 256) / 100;
I_MotorTemperature:= (BYTE_TO_INT(PDO_R2.DATA[4]) + BYTE_TO_INT(PDO_R2.DATA[5]) * 256) / 10;
I_CurtisTemperature:= (BYTE_TO_INT(PDO_R2.DATA[6]) + BYTE_TO_INT(PDO_R2.DATA[7]) * 256) / 10;
(*To
be
setup
by
curtis in PAR
file *)"""
# print("toRet:",toRet)
return toRet
def parse(self,IdString,DataString):
parseData = {"fct": "Regen" }
toRet="REGEN :"
#toRet += " 0x{:02X}\t".format(int(IdString, 16) & 0x7F)
lineDesc = toRet
##########################
if IdString == "70D":
toRet = toRet + "HearthBeat"
elif IdString == "20D": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
toRet = toRet + " PLC CMD<br><br>" + \
lineDesc + "[2:3] 0x{:04X} throttle = {}<br>" + \
lineDesc + "[4,5] 0x{:04X} pump nominalspeed = {}<br> " + \
lineDesc + "[6,7] 0x{:04X} pump percent = {}<br>"
toRet = toRet.format(
(getBytes(DataString, 2, 16)), getBytes(DataString, 2, 16),
(getBytes(DataString, 4, 16)), getBytes(DataString, 4, 16),
(getBytes(DataString, 6, 16)), getBytes(DataString, 6, 16))
elif IdString == "30D": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
toRet = toRet + " PLC CMD<br><br>"
elif hex(int("0x"+IdString,16) & 0x7F0) == "0x180":
toRet = lineDesc + "[0,1] 0x{:04X} inputCurrent = {}<br>" + \
lineDesc + "[4,5] 0x{:04X} motor RPM = {}<br> " + \
lineDesc + "[6,7] 0x{:04X} motorCurrent = {}<br>"
toRet = toRet.format(
(getBytes(DataString, 2, 16)), getBytes(DataString, 2, 16),
(getBytes(DataString, 4, 16)), getBytes(DataString, 4, 16),
(getBytes(DataString, 6, 16)), getBytes(DataString, 6, 16))
elif hex(int("0x" + IdString, 16) & 0x7F0) == "0x280":
toRet = lineDesc + "[0,1] 0x{:04X} R_Input = {}<br>" + \
lineDesc + "[2,3] 0x{:04X} CurtisVoltage = {}<br> " + \
lineDesc + "[4,5] 0x{:04X} Motor Temp = {}<br> " + \
lineDesc + "[6,7] 0x{:04X} Drive Temp = {}<br>"
toRet = toRet.format(
(getBytes(DataString, 0, 16)), getBytes(DataString, 0, 16),
(getBytes(DataString, 2, 16)), getBytes(DataString, 2, 16),
(getBytes(DataString, 4, 16)), getBytes(DataString, 4, 16),
(getBytes(DataString, 6, 16)), getBytes(DataString, 6, 16))
# print("toRet:",toRet)
return toRet
def parse(self,IdString,DataString):
toRet = "NBL Drive :"
# toRet += " 0x{:02X}\t".format(int(IdString, 16) & 0x7F)
lineDesc = toRet
##########################
if IdString == "1A6":
toRet = toRet + " NBL Drive<br><br>" + \
lineDesc + "[0,1] 0x{:04X} = Switches{}<br>" + \
lineDesc + "[2,2] 0x{:04X} = CAN_Controller_outputs {}<br>" + \
lineDesc + "[3,3] 0x{:04X} = Drive_state{}<br> " + \
lineDesc + "[4,5] 0x{:04X} = Pump_HM_scaled{}<br> " + \
lineDesc + "[6,7] 0x{:04X} = Trac_HM_scaled{}<br>"
toRet = toRet.format(
(getBytes(DataString, 0, 16)), getBytes(DataString, 0, 16),
(getBytes(DataString, 2, 8)), getBytes(DataString, 2, 8),
(getBytes(DataString, 3, 8)), getBytes(DataString, 3, 8),
(getBytes(DataString, 4, 16)), getBytes(DataString, 4, 16),
(getBytes(DataString, 6, 16)), getBytes(DataString, 6, 16))
"""Purpose Send Message to IFM Module.
; Type PDO1_MISO
; Standard COB ID - 0x1a6
Setup_Mailbox(CAN1,PDO_MISO,0,38,C_CYCLIC,C_XMT,0,0)
Setup_Mailbox_Data(CAN1,8,
@Switches,
@Switches+USEHB,
@CAN_Controller_outputs,
@Drive_state,
@Pump_HM_scaled,
@Pump_HM_scaled+USEHB,
@Trac_HM_scaled,
@Trac_HM_scaled+USEHB) """
elif IdString == "3A6": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
toRet = toRet + " NBL Drive<br><br>" + \
lineDesc + "[0,6] {} = Status 1-7<br>" + \
lineDesc + "[7,7] {} = UserFault <br>"
toRet = toRet.format(
DataString[:21],
DataString[21:]
)
"""
; MAILBOX 3
; Purpose Send Message to IFM Module.
; Type PDO3_MISO
; Standard COB ID - 0x3a6
Setup_Mailbox(CAN3,PDO3_MISO,0,38,C_CYCLIC,C_XMT,0,0)
Setup_Mailbox_Data(CAN3,8,
@Status1,
@Status2,
@Status3,
@Status4,
@Status5,
@Status6,
@Status7,
@UserFault1)
"""
elif IdString == "2A6": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
toRet = toRet + " NBL Drive<br><br>" + \
lineDesc + "[0,1] 0x{:04X} KSI = {}<br>" + \
lineDesc + "[2,3] 0x{:04X} Phas Current = {}<br>" + \
lineDesc + "[4,5] 0x{:04X} Batt Current = {}<br> " + \
lineDesc + "[6,7] 0x{:04X} Motor RPM = {}<br>"
toRet = toRet.format(
(getBytes(DataString, 0, 16)), getBytes(DataString, 0, 16),
(getBytes(DataString, 2, 16)), getBytes(DataString, 2, 16),
(getBytes(DataString, 4, 16)), getBytes(DataString, 4, 16),
(getBytes(DataString, 6, 16)), getBytes(DataString, 6, 16))
"""
; MAILBOX 2
; Purpose Send Message to IFM Module.
; Type PDO2_MISO
; Standard COB ID - 0x2a6
Setup_Mailbox(CAN2,PDO2_MISO,0,38,C_CYCLIC,C_XMT,0,0)
Setup_Mailbox_Data(CAN2,8,
@Keyswitch_voltage,
@Keyswitch_voltage+USEHB,
@Current_RMS,
@Current_RMS+USEHB,
@Battery_current,
@Battery_current+USEHB,
@Motor_RPM,
@Motor_RPM+USEHB)
"""
elif IdString == "4A6": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
toRet = toRet + " NBL Drive<br><br>" + \
lineDesc + "[0,1] 0x{:04X} Total HourMeter = {}<br>" + \
lineDesc + "[2,3] 0x{:04X} Program Num Low <br>" + \
lineDesc + "[4,5] 0x{:04X} Program Num High <br> " + \
lineDesc + "[6,7] 0x{:04X} Program Rev = {}<br>" + \
lineDesc + "[6,7] 0x{:04X} BDI = {}%<br>"
toRet = toRet.format(
(getBytes(DataString, 0, 16)), getBytes(DataString, 0, 16),
(getBytes(DataString, 2, 16)),
(getBytes(DataString, 4, 16)),
(getBytes(DataString, 6, 8)), getBytes(DataString, 6, 8),
(getBytes(DataString, 7, 8)), getBytes(DataString, 7, 8))
"""
; MAILBOX 4
; Purpose Send Message to IFM Module.
; Type PDO4_MISO
; Standard COB ID - 0x4a6
Setup_Mailbox(CAN4,PDO4_MISO,0,38,C_CYCLIC,C_XMT,0,0)
Setup_Mailbox_Data(CAN4,8,
@Total_HM_scaled,
@Total_HM_scaled+USEHB,
@Program_number_LO,
@Program_number_LO+USEHB,
@Program_number_HI,
@Program_number_HI+USEHB,
@Program_Revision,
@BDI_Percentage)
"""
elif IdString == "227": # bytes 0&1 :tbd bytes2,3,4,5:measured voltage bytes 6&7:current
""" CAN_Start_pump_from_drive bit CAN_Pump_Commands.1
CAN_Disable_Belt bit CAN_Pump_Commands.2
CAN_Neutral_direction_flag bit CAN_Pump_Commands.4 """
toRet = toRet + " NBL Drive command to PUMP<br><br>" + \
lineDesc + "[0,0] 0x{:02X} CAN_Pump_Commands NeutralDir / Disable Belt / StartPumpFromDrive<br>" + \
lineDesc + "[1,2] 0x{:04X} Throttle Command <br>" + \
lineDesc + "[3,7] 0x{} Program Num High <br> "
toRet = toRet.format(
(getBytes(DataString, 0, 8)), getBytes(DataString, 0, 8),
(getBytes(DataString, 1, 16)))
return toRet
