def accept(self):
"""Tries to restore the image, and closes the dialog if successful."""
# get list of sources to restore
sources = self.model.sources
sel_sources = [src for src in sources if src.selected]
if len(sel_sources) > 0 and len(sel_sources) < len(
sources) and self.wselonly.isChecked():
sources = sel_sources
if not sources:
self.qerrmsg.showMessage("No sources to restore.")
return
busy = BusyIndicator()
# get filenames
infile = self.wfile_in.filename()
outfile = self.wfile_out.filename()
self.parent().showMessage(
"Restoring %d model sources to image %s, writing to %s" %
(len(sources), infile, outfile))
# read fits file
try:
input_hdu = pyfits.open(infile)[0]
except Exception as err:
busy.reset_cursor()
self.qerrmsg.showMessage("Error reading FITS file %s: %s" %
(infile, str(err)))
return
# get beam sizes
try:
bmaj = float(str(self.wbmaj.text()))
bmin = float(str(self.wbmin.text()))
pa = float(str(self.wbpa.text()) or "0")
except Exception as err:
busy.reset_cursor()
self.qerrmsg.showMessage("Invalid beam size specified")
return
bmaj = bmaj / (Imaging.FWHM * 3600) * DEG
bmin = bmin / (Imaging.FWHM * 3600) * DEG
pa = pa * DEG
# restore
try:
Imaging.restoreSources(input_hdu, sources, bmaj, bmin, pa)
except Exception as err:
busy.reset_cursor()
self.qerrmsg.showMessage("Error restoring model into image: %s" %
str(err))
return
# save fits file
try:
input_hdu.writeto(outfile, overwrite=True)
except Exception as err:
busy.reset_cursor()
self.qerrmsg.showMessage("Error writing FITS file %s: %s" %
(outfile, str(err)))
return
self.parent().loadImage(outfile)
busy.reset_cursor()
return QDialog.accept(self)
def accept(self):
"""Tries to make a brick, and closes the dialog if successful."""
sources = [
src for src in self.model.sources
if src.selected and src.typecode == 'pnt'
]
filename = self.wfile.filename()
if not self._fileSelected(filename):
return
# get PB expression
pbfunc = None
if self.wpb_apply.isChecked():
pbexp = str(self.wpb_exp.text())
try:
pbfunc = eval("lambda r,fq:" + pbexp)
except Exception as err:
QMessageBox.warning(
self, "Error parsing PB experssion",
"Error parsing primary beam expression %s: %s" %
(pbexp, str(err)))
return
# get frequency
freq = str(self.wfreq.text())
freq = float(freq) * 1e+6 if freq else None
# get pad factor
pad = str(self.wpad.text())
pad = max(float(pad), 1) if pad else 1
# read fits file
busy = BusyIndicator()
try:
input_hdu = pyfits.open(filename)[0]
except Exception as err:
busy = None
QMessageBox.warning(
self, "Error reading FITS",
"Error reading FITS file %s: %s" % (filename, str(err)))
return
# reset data if asked to
if self.woverwrite.isChecked():
input_hdu.data[...] = 0
# insert sources
Imaging.restoreSources(input_hdu,
sources,
0,
primary_beam=pbfunc,
freq=freq)
# save fits file
try:
# pyfits seems to produce an exception:
# TypeError: formatwarning() takes exactly 4 arguments (5 given)
# when attempting to overwrite a file. As a workaround, remove the file first.
if os.path.exists(filename):
os.remove(filename)
input_hdu.writeto(filename)
except Exception as err:
traceback.print_exc()
busy = None
QMessageBox.warning(
self, "Error writing FITS",
"Error writing FITS file %s: %s" % (filename, str(err)))
return
changed = False
sources = self.model.sources
# remove sources from model if asked to
if self.wdel.isChecked():
sources = [
src for src in sources
if not (src.selected and src.typecode == 'pnt')
]
changed = True
# add image to model if asked to
if self.wadd.isChecked():
hdr = input_hdu.header
# get image parameters
max_flux = float(input_hdu.data.max())
wcs = WCS(hdr, mode='pyfits')
# Get reference pixel coordinates
# wcs.getCentreWCSCoords() doesn't work, as that gives us the middle of the image
# So scan the header to get the CRPIX values
ra0 = dec0 = 1
for iaxis in range(hdr['NAXIS']):
axs = str(iaxis + 1)
name = hdr.get('CTYPE' + axs, axs).upper()
if name.startswith("RA"):
ra0 = hdr.get('CRPIX' + axs, 1) - 1
elif name.startswith("DEC"):
dec0 = hdr.get('CRPIX' + axs, 1) - 1
# convert pixel to degrees
ra0, dec0 = wcs.pix2wcs(ra0, dec0)
ra0 *= DEG
dec0 *= DEG
sx, sy = wcs.getHalfSizeDeg()
sx *= DEG
sy *= DEG
nx, ny = input_hdu.data.shape[-1:-3:-1]
# check if this image is already contained in the model
for src in sources:
if isinstance(getattr(src, 'shape', None),
ModelClasses.FITSImage) and os.path.samefile(
src.shape.filename, filename):
# update source parameters
src.pos.ra, src.pos.dec = ra0, dec0
src.flux.I = max_flux
src.shape.ex, src.shape.ey = sx, sy
src.shape.nx, src.shape.ny = nx, ny
src.shape.pad = pad
break
# not contained, make new source object
else:
pos = ModelClasses.Position(ra0, dec0)
flux = ModelClasses.Flux(max_flux)
shape = ModelClasses.FITSImage(sx,
sy,
0,
os.path.basename(filename),
nx,
ny,
pad=pad)
img_src = SkyModel.Source(os.path.splitext(
os.path.basename(filename))[0],
pos,
flux,
shape=shape)
sources.append(img_src)
changed = True
if changed:
self.model.setSources(sources)
self.model.emitUpdate(SkyModel.SkyModel.UpdateAll, origin=self)
self.parent().showMessage("Wrote %d sources to FITS file %s" %
(len(sources), filename))
busy = None
return QDialog.accept(self)
return;
# get beam sizes
try:
bmaj = float(str(self.wbmaj.text()));
bmin = float(str(self.wbmin.text()));
pa = float(str(self.wbpa.text()) or "0");
except Exception,err:
busy = None;
self.qerrmsg.showMessage("Invalid beam size specified");
return;
bmaj = bmaj/(Imaging.FWHM*3600)*DEG;
bmin = bmin/(Imaging.FWHM*3600)*DEG;
pa = pa*DEG;
# restore
try:
Imaging.restoreSources(input_hdu,sources,bmaj,bmin,pa);
except Exception,err:
busy = None;
self.qerrmsg.showMessage("Error restoring model into image: %s"%str(err));
return;
# save fits file
try:
input_hdu.writeto(outfile,clobber=True);
except Exception,err:
busy = None;
self.qerrmsg.showMessage("Error writing FITS file %s: %s"%(outfile,str(err)));
return;
self.parent().loadImage(outfile);
busy = None;
return QDialog.accept(self);
def accept(self):
"""Tries to make a brick, and closes the dialog if successful."""
sources = [src for src in self.model.sources if src.selected and src.typecode == 'pnt']
filename = self.wfile.filename()
if not self._fileSelected(filename):
return
# get PB expression
pbfunc = None
if self.wpb_apply.isChecked():
pbexp = str(self.wpb_exp.text())
try:
pbfunc = eval("lambda r,fq:" + pbexp)
except Exception as err:
QMessageBox.warning(self, "Error parsing PB experssion",
"Error parsing primary beam expression %s: %s" % (pbexp, str(err)))
return
# get frequency
freq = str(self.wfreq.text())
freq = float(freq) * 1e+6 if freq else None
# get pad factor
pad = str(self.wpad.text())
pad = max(float(pad), 1) if pad else 1
# read fits file
busy = BusyIndicator()
try:
input_hdu = pyfits.open(filename)[0]
except Exception as err:
busy = None
QMessageBox.warning(self, "Error reading FITS", "Error reading FITS file %s: %s" % (filename, str(err)))
return
# reset data if asked to
if self.woverwrite.isChecked():
input_hdu.data[...] = 0
# insert sources
Imaging.restoreSources(input_hdu, sources, 0, primary_beam=pbfunc, freq=freq)
# save fits file
try:
# pyfits seems to produce an exception:
# TypeError: formatwarning() takes exactly 4 arguments (5 given)
# when attempting to overwrite a file. As a workaround, remove the file first.
if os.path.exists(filename):
os.remove(filename)
input_hdu.writeto(filename)
except Exception as err:
traceback.print_exc()
busy = None
QMessageBox.warning(self, "Error writing FITS", "Error writing FITS file %s: %s" % (filename, str(err)))
return
changed = False
sources = self.model.sources
# remove sources from model if asked to
if self.wdel.isChecked():
sources = [src for src in sources if not (src.selected and src.typecode == 'pnt')]
changed = True
# add image to model if asked to
if self.wadd.isChecked():
hdr = input_hdu.header
# get image parameters
max_flux = float(input_hdu.data.max())
wcs = WCS(hdr, mode='pyfits')
# Get reference pixel coordinates
# wcs.getCentreWCSCoords() doesn't work, as that gives us the middle of the image
# So scan the header to get the CRPIX values
ra0 = dec0 = 1
for iaxis in range(hdr['NAXIS']):
axs = str(iaxis + 1)
name = hdr.get('CTYPE' + axs, axs).upper()
if name.startswith("RA"):
ra0 = hdr.get('CRPIX' + axs, 1) - 1
elif name.startswith("DEC"):
dec0 = hdr.get('CRPIX' + axs, 1) - 1
# convert pixel to degrees
ra0, dec0 = wcs.pix2wcs(ra0, dec0)
ra0 *= DEG
dec0 *= DEG
sx, sy = wcs.getHalfSizeDeg()
sx *= DEG
sy *= DEG
nx, ny = input_hdu.data.shape[-1:-3:-1]
# check if this image is already contained in the model
for src in sources:
if isinstance(getattr(src, 'shape', None), ModelClasses.FITSImage) and os.path.samefile(
src.shape.filename, filename):
# update source parameters
src.pos.ra, src.pos.dec = ra0, dec0
src.flux.I = max_flux
src.shape.ex, src.shape.ey = sx, sy
src.shape.nx, src.shape.ny = nx, ny
src.shape.pad = pad
break
# not contained, make new source object
else:
pos = ModelClasses.Position(ra0, dec0)
flux = ModelClasses.Flux(max_flux)
shape = ModelClasses.FITSImage(sx, sy, 0, os.path.basename(filename), nx, ny, pad=pad)
img_src = SkyModel.Source(os.path.splitext(os.path.basename(filename))[0], pos, flux, shape=shape)
sources.append(img_src)
changed = True
if changed:
self.model.setSources(sources)
self.model.emitUpdate(SkyModel.SkyModel.UpdateAll, origin=self)
self.parent().showMessage("Wrote %d sources to FITS file %s" % (len(sources), filename))
busy = None
return QDialog.accept(self)
return;
# get beam sizes
try:
bmaj = float(str(self.wbmaj.text()));
bmin = float(str(self.wbmin.text()));
pa = float(str(self.wbpa.text()) or "0");
except Exception,err:
busy = None;
self.qerrmsg.showMessage("Invalid beam size specified");
return;
bmaj = bmaj/(Imaging.FWHM*3600)*DEG;
bmin = bmin/(Imaging.FWHM*3600)*DEG;
pa = pa*DEG;
# restore
try:
Imaging.restoreSources(input_hdu,sources,bmaj,bmin,pa);
except Exception,err:
busy = None;
self.qerrmsg.showMessage("Error restoring model into image: %s"%str(err));
return;
# save fits file
try:
input_hdu.writeto(outfile,clobber=True);
except Exception,err:
busy = None;
self.qerrmsg.showMessage("Error writing FITS file %s: %s"%(outfile,str(err)));
return;
self.parent().loadImage(outfile);
busy = None;
return QDialog.accept(self);
# get pad factor
pad = str(self.wpad.text());
pad = max(float(pad),1) if pad else 1;
# read fits file
busy = BusyIndicator();
try:
input_hdu = pyfits.open(filename)[0];
except Exception,err:
busy = None;
QMessageBox.warning(self,"Error reading FITS","Error reading FITS file %s: %s"%(filename,str(err)));
return;
# reset data if asked to
if self.woverwrite.isChecked():
input_hdu.data[...] = 0;
# insert sources
Imaging.restoreSources(input_hdu,sources,0,primary_beam=pbfunc,freq=freq);
# save fits file
try:
# pyfits seems to produce an exception:
# TypeError: formatwarning() takes exactly 4 arguments (5 given)
# when attempting to overwrite a file. As a workaround, remove the file first.
if os.path.exists(filename):
os.remove(filename);
input_hdu.writeto(filename);
except Exception,err:
traceback.print_exc();
busy = None;
QMessageBox.warning(self,"Error writing FITS","Error writing FITS file %s: %s"%(filename,str(err)));
return;
changed = False;
sources = self.model.sources;