def __init__(self, cfg, doit):
""" create the GUI panel widgets
cfg -- parameter values (input and output)
doit -- method to call to run simulations
"""
# gather the basic parameters
self.cfg = cfg
self.doit = doit
self.root = Tk()
self.root.title('Data Reliability Model')
t = Frame(self.root, bd=2 * self.BORDER)
# w.iconbitmap(default='inktank.ico') # ? windows only ?
# left stack (DISK)
f = Frame(t, bd=self.BORDER, relief=RIDGE)
r = 1
Label(f, text="Disk Type").grid(row=r)
self.disk_type = StringVar(f)
self.disk_type.set(self.diskTypes[0])
OptionMenu(f, self.disk_type, *self.diskTypes,
command=self.diskchoice).grid(row=r + 1)
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Size (GiB)").grid(row=r)
self.disk_size = Entry(f, width=self.long_wid)
self.disk_size.delete(0, END)
self.disk_size.insert(0, self.long_fmt % (cfg.disk_size / GiB))
self.disk_size.grid(row=r + 1)
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Primary FITs").grid(row=r)
self.disk_fit = Entry(f, width=self.long_wid)
self.disk_fit.grid(row=r + 1)
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Secondary FITs").grid(row=r)
self.disk_fit2 = Entry(f, width=self.long_wid)
self.disk_fit2.grid(row=r + 1)
Label(f).grid(row=r + 2)
r += 3
Label(f, text="NRE rate").grid(row=r)
self.disk_nre = Spinbox(f, width=self.long_wid, values=self.nre_rates)
self.disk_nre.grid(row=r + 1)
Label(f).grid(row=r + 2)
r += 3
while r < self.ROWS:
Label(f).grid(row=r)
r += 1
Button(f, text="RELIABILITY", command=self.do_disk).grid(row=r)
f.grid(column=1, row=1)
self.diskchoice(self.diskTypes[0]) # set default disk type
# second stack (RAID)
f = Frame(t, bd=self.BORDER, relief=RIDGE)
r = 1
Label(f, text="RAID Type").grid(row=r)
self.raid_type = StringVar(f)
self.raid_type.set("RAID-1")
OptionMenu(f, self.raid_type, *self.raidTypes,
command=self.raidchoice).grid(row=r + 1)
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Replace (hours)").grid(row=r)
self.raid_rplc = Spinbox(f, width=self.short_wid,
values=self.replace_times)
self.raid_rplc.grid(row=r + 1)
self.raid_rplc.delete(0, END)
self.raid_rplc.insert(0, "%d" % cfg.raid_replace)
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Rebuild (MiB/s)").grid(row=r)
self.raid_speed = Spinbox(f, width=self.med_wid,
values=self.rebuild_speeds)
self.raid_speed.grid(row=r + 1)
self.raid_speed.delete(0, END)
self.raid_speed.insert(0, "%d" % (cfg.raid_recover / MiB))
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Volumes").grid(row=r)
self.raid_vols = Spinbox(f, from_=1, to=10, width=self.short_wid)
self.raid_vols.grid(row=r + 1)
Label(f).grid(row=r + 2)
self.raidchoice("RAID-1") # set default number of volumes
r += 3
while r < self.ROWS:
Label(f).grid(row=r)
r += 1
Button(f, text="RELIABILITY", command=self.do_raid).grid(row=r)
f.grid(column=2, row=1)
# third stack (RADOS)
f = Frame(t, bd=self.BORDER, relief=RIDGE)
r = 1
Label(f, text="RADOS copies").grid(row=r)
self.rados_cpys = Spinbox(f, values=(1, 2, 3, 4, 5, 6),
width=self.short_wid)
self.rados_cpys.grid(row=r + 1)
self.rados_cpys.delete(0, END)
self.rados_cpys.insert(0, "%d" % cfg.rados_copies)
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Mark-out (min)").grid(row=r)
self.rados_down = Spinbox(f, values=self.markout_times,
width=self.short_wid)
self.rados_down.grid(row=r + 1)
self.rados_down.delete(0, END)
self.rados_down.insert(0, "%d" % (cfg.rados_markout * 60))
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Recovery (MiB/s)").grid(row=r)
self.rados_speed = Spinbox(f, width=self.med_wid,
values=self.rebuild_speeds)
self.rados_speed.grid(row=r + 1)
self.rados_speed.delete(0, END)
self.rados_speed.insert(0, "%d" % (cfg.rados_recover / MiB))
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Space Usage (%)").grid(row=r)
self.rados_fullness = Spinbox(f, values=self.fullness,
width=self.med_wid)
self.rados_fullness.grid(row=r + 1)
self.rados_fullness.delete(0, END)
self.rados_fullness.insert(0, "%d" % (cfg.rados_fullness * 100))
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Declustering (pg)").grid(row=r)
self.rados_pgs = Entry(f, width=self.med_wid)
self.rados_pgs.delete(0, END)
self.rados_pgs.insert(0, self.med_fmt % cfg.rados_decluster)
self.rados_pgs.grid(row=r + 1)
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Stripe Length").grid(row=r)
self.stripe_length = Entry(f, width=self.med_wid)
self.stripe_length.delete(0, END)
self.stripe_length.insert(0, self.med_fmt % cfg.stripe_length)
self.stripe_length.grid(row=r + 1)
Label(f).grid(row=r + 2)
r += 3
while r < self.ROWS:
Label(f).grid(row=r)
r += 1
Button(f, text="RELIABILITY", command=self.do_rados).grid(row=r)
f.grid(column=3, row=1)
# fourth stack (remote site)
r = 1
f = Frame(t, bd=self.BORDER, relief=RIDGE)
Label(f, text="RADOS Sites").grid(row=r)
self.site_num = Spinbox(f, values=self.site_count,
width=self.short_wid)
self.site_num.grid(row=r + 1)
self.site_num.delete(0, END)
self.site_num.insert(0, "%d" % cfg.remote_sites)
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Rep Latency (s)").grid(row=r)
self.remote_latency = Spinbox(f, values=self.async_latencies,
width=self.long_wid)
self.remote_latency.grid(row=r + 1)
self.remote_latency.delete(0, END)
self.remote_latency.insert(0, "%d" % (cfg.remote_latency * 60 * 60))
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Recovery (MiB/s)").grid(row=r)
self.remote_speed = Spinbox(f, values=self.remote_speeds,
width=self.med_wid)
self.remote_speed.grid(row=r + 1)
self.remote_speed.delete(0, END)
self.remote_speed.insert(0, "%d" % (cfg.remote_recover / MiB))
Label(f).grid(row=r + 2)
r += 3
Label(f, text="Disaster (years)").grid(row=r)
self.remote_fail = Spinbox(f, values=self.site_destroy,
width=self.long_wid)
self.remote_fail.grid(row=r + 1)
self.remote_fail.delete(0, END)
self.remote_fail.insert(0, "1000")
# FIX - get this from cfg ... but translate from FITS
Label(f).grid(column=2, row=r + 2)
r += 3
Label(f, text="Site Recover (days)").grid(row=r)
self.remote_avail = Spinbox(f, values=self.site_recover,
width=self.long_wid)
self.remote_avail.grid(row=r + 1)
self.remote_avail.delete(0, END)
self.remote_avail.insert(0, "30")
# FIX - get this from cfg ... but translate from FITS
Label(f).grid(row=r + 2)
r += 3
while r < self.ROWS:
Label(f).grid(row=r)
r += 1
Button(f, text="RELIABILITY", command=self.do_sites).grid(row=r)
f.grid(column=4, row=1)
# and the control panel
r = 2
c = 1
Label(t).grid(column=c, row=r)
Label(t, text="NRE model").grid(column=c, row=r + 1)
self.nre_model = StringVar(t)
self.nre_model.set(self.cfg.nre_model)
OptionMenu(t, self.nre_model, *self.nreTypes).grid(column=c, row=r + 2)
c = 2
Label(t).grid(column=c, row=r)
Label(t, text="Period (years)").grid(column=c, row=r + 1)
self.period = Spinbox(t, from_=1, to=10, width=self.short_wid)
self.period.grid(column=c, row=r + 2)
c = 3
Label(t).grid(column=c, row=r)
Label(t, text="Object size").grid(column=c, row=r + 1)
# generate object sizes dynamically from parameters
os = self.min_obj_size
while os <= self.max_obj_size:
if os < MB:
s = "%dKB" % (os / KB)
elif os < GB:
s = "%dMB" % (os / MB)
elif os < TB:
s = "%dGB" % (os / GB)
else:
s = "%dTB" % (os / TB)
self.object_sizes.append(s)
os *= self.step_obj_size
self.obj_size = Spinbox(t, values=self.object_sizes,
width=self.long_wid)
self.obj_size.grid(column=c, row=r + 2)
self.obj_size.delete(0, END)
self.obj_size.insert(0, self.object_sizes[0])
c = 4
Label(t).grid(column=c, row=r)
Label(t, text="Verbosity").grid(column=c, row=r + 1)
self.verbosity = StringVar(t)
self.verbosity.set(cfg.verbose)
OptionMenu(t, self.verbosity, *self.verbosities).grid(column=c,
row=r + 2)
# and then finalize everything
t.grid()
def make_entry(self,master,field,field_spec,values,bar):
# print 'make entry',self.field_index,field,field_spec
if field_spec['shape']=='tab':
self.current_tab = Tab(master, field_spec['name'])
bar.add(self.current_tab,field_spec['text'])
self.tab_row=1
return None
elif field_spec['shape']=='sep':
Label(self.current_tab,text='', anchor=W).grid(row=self.tab_row,column=0,sticky=W)
self.tab_row+=1
return None
else:
# print 'replace param in make entry',field
# print 'content', field, self.field_content[field]
# is it in the field content dictionary
if not field in self.field_content:
self.mon.log(self,"Value for field not found in opened file: " + field)
return None
else:
if field_spec['must']=='yes':
bg='pink'
else:
bg='white'
# write the label
Label(self.current_tab,text=field_spec['text'], anchor=W).grid(row=self.tab_row,column=0,sticky=W)
# make the editable field
if field_spec['shape']in ('entry','colour','browse','font'):
obj=Entry(self.current_tab,bg=bg,width=40,font='arial 11')
obj.insert(END,self.field_content[field])
elif field_spec['shape']=='text':
obj=ScrolledText(self.current_tab,bg=bg,height=8,width=40,font='arial 11')
obj.insert(END,self.field_content[field])
elif field_spec['shape']=='spinbox':
obj=Spinbox(self.current_tab,bg=bg,values=values,wrap=True)
obj.insert(END,self.field_content[field])
elif field_spec['shape']=='option-menu':
self.option_val = StringVar(self.current_tab)
self.option_val.set(self.field_content[field])
obj = apply(OptionMenu, [self.current_tab, self.option_val] + values)
self.entries.append(self.option_val)
else:
self.mon.log(self,"Uknown shape for: " + field)
return None
if field_spec['read-only']=='yes':
obj.config(state="readonly",bg='dark grey')
obj.grid(row=self.tab_row,column=1,sticky=W)
# display buttons where required
if field_spec['shape']=='browse':
but=Button(self.current_tab,width=1,height=1,bg='dark grey',command=(lambda o=obj: self.browse(o)))
but.grid(row=self.tab_row,column=2,sticky=W)
elif field_spec['shape']=='colour':
but=Button(self.current_tab,width=1,height=1,bg='dark grey',command=(lambda o=obj: self.pick_colour(o)))
but.grid(row=self.tab_row,column=2,sticky=W)
elif field_spec['shape']=='font':
but=Button(self.current_tab,width=1,height=1,bg='dark grey',command=(lambda o=obj: self.pick_font(o)))
but.grid(row=self.tab_row,column=2,sticky=W)
self.tab_row+=1
return obj
def modifyUI(self):
frame_bottom = self.frame_bottom
frame_main = self.frame_main
self.sliceView = [
ImshowMplCanvas(frame_main) for k in range(self.shape[2])
]
self.sliceSpin = [
MySpinBox(frame_main, k) for k in range(self.shape[2])
]
#Layout
self.parent.title('CreateMask')
max_spin = 0
if self.mask4d:
max_spin = self.shape[3] - 1
self.spin_volume = Spinbox(frame_bottom,
from_=0,
to=max_spin,
increment=1,
command=self.change_volume,
width=8)
self.reset_box(self.spin_volume, 0)
buttonMask = Button(frame_bottom,
text='B0 from Bval...',
command=self.createBaseImage)
buttonMaskCreate = Button(frame_bottom,
text='Create',
command=self.createMaskAll)
buttonSave = Button(frame_bottom, text='Save', command=self.saveMask)
self.drawmask = BooleanVar()
buttonDrawMask = Checkbutton(frame_bottom,
text='Draw Mask',
variable=self.drawmask,
command=self.drawSlice)
num_col = 3
num_row = 6
for col in range(self.shape[2] / num_row):
for k in range(num_row):
ind = col * num_row + k
if ind >= self.shape[2]:
break
self.sliceView[ind].get_tk_widget().grid(row=k,
column=col * num_col,
sticky=NSEW)
self.sliceSpin[ind].grid(row=k, column=col * num_col + 1)
self.frame_main.grid_columnconfigure(col * num_col, weight=1)
for k in range(num_row):
self.frame_main.grid_rowconfigure(k, weight=1)
self.spin_volume.grid(row=0, column=0)
buttonMask.grid(row=0, column=1)
buttonMaskCreate.grid(row=0, column=2)
buttonSave.grid(row=0, column=3)
buttonDrawMask.grid(row=0, column=5)
frame_bottom.pack(side=BOTTOM)
frame_main.pack(fill=BOTH, expand=TRUE)
self.pack(fill=BOTH, expand=True)
qlep.bind("<Enter>", on_enterlep)
qlep.bind("<Leave>", on_leavelep)
#Everything concerning jets:
minnjet_val = IntVar()
minnjet_val.set(0) # initialize integer for min number of jets
maxnjet_val = IntVar()
maxnjet_val.set(9) # initialize integer for max number of jets
labelminjet = Label(frame1, text="Minimum:")
labelmaxjet = Label(frame1, text="Maximum:") #Some labels for the entries
minjet_entry = Spinbox(frame1,
textvariable=minnjet_val,
from_=0,
to=9,
width=4) #Entry for min number of jets
maxjet_entry = Spinbox(frame1,
textvariable=maxnjet_val,
from_=0,
to=9,
width=4) #Entry for max number of jets
btagmin_val = IntVar()
btagmin_val.set(0) #Initialise minimum b-jets
btagmax_val = IntVar()
btagmax_val.set(9) #Initialise maximum b-jets
labelminbjet = Label(frame1, text="Minimum:")
labelmaxbjet = Label(frame1, text="Maximum:") #Labels for b-jets entries
def initUI(self):
self.parent.title(self.title)
self.nosearch = BooleanVar(self)
self.noresample = BooleanVar(self)
i = 0
#frame_top = Frame(self)
#frame_top.grid(row=i, column=0, columnspan=6, sticky=EW)
#Label(frame_top, text='topframe').grid(row=0, column=0, sticky=EW)
#Label(frame_top, text='topframe').grid(row=0, column=1, sticky=EW)
#Label(frame_top, text='topframe').grid(row=1, column=0, sticky=EW)
#Label(frame_top, text='topframe').grid(row=1, column=1, sticky=EW)
#Entry(frame_top, text='topframe').grid(row=0, column=0, sticky=EW)
#Entry(frame_top, text='topframe').grid(row=0, column=1, sticky=EW)
#Entry(frame_top, text='topframe').grid(row=1, column=0, sticky=EW)
#Entry(frame_top, text='topframe').grid(row=1, column=1, sticky=EW)
#frame_top.grid_columnconfigure(0, weight=1)
#frame_top.grid_columnconfigure(1, weight=1)
dddWidth = 4
labelWidth = 10
i += 1
Label(self, text='Working dir', width=labelWidth).grid(row=i, column=0)
self.txt_working = Entry(self)
self.txt_working.grid(row=i, column=1, sticky=EW)
btn_working = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.dirnameDialog_text(self.txt_working))
btn_working.grid(row=i, column=2, sticky=W)
i += 1
Label(self, text='Parameters', width=labelWidth).grid(row=i, column=0)
self.txt_param = Entry(self)
self.txt_param.grid(row=i, column=1, sticky=EW)
btn_param_read = Button(self, text='Read', command=self.read_param)
btn_param_read.grid(row=i, column=2)
btn_param_save = Button(self, text='Save', command=self.save_param)
btn_param_save.grid(row=i, column=3)
i += 1
frm_prepa = Frame(self)
ii = 0
Label(frm_prepa, text='Subject', width=labelWidth).grid(row=ii,
column=0)
self.txt_subject = Entry(frm_prepa)
self.txt_subject.grid(row=ii, column=1, sticky=EW)
btn_prepa = Button(frm_prepa,
text='Prepare DWIs',
command=self.run_prepare)
btn_prepa.grid(row=ii, column=3)
#btn_update = Button(frm_prepa, text='Update filenames', command=self.update_parameter); btn_update.grid(row=ii, column=4)
btn_update = Button(frm_prepa,
text='Update filenames',
command=self.update_text_from_param)
btn_update.grid(row=ii, column=4)
ii += 1
Label(frm_prepa, text='bval', width=labelWidth).grid(row=ii, column=0)
self.txt_bval = Entry(frm_prepa)
self.txt_bval.grid(row=ii, column=1, sticky=EW)
btn_bval = Button(
frm_prepa,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_bval))
btn_bval.grid(row=ii, column=2, sticky=W)
Label(frm_prepa, text='b0 threshold').grid(row=ii, column=3, sticky=E)
self.txt_b0_threshold = Entry(frm_prepa, width=10)
self.txt_b0_threshold.grid(row=ii, column=4)
ii += 1
Label(frm_prepa, text='bvec', width=labelWidth).grid(row=ii, column=0)
self.txt_bvec = Entry(frm_prepa)
self.txt_bvec.grid(row=ii, column=1, sticky=EW)
btn_bvec = Button(
frm_prepa,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_bvec))
btn_bvec.grid(row=ii, column=2, sticky=W)
Label(frm_prepa, text='high b threshold').grid(row=ii,
column=3,
sticky=E)
self.txt_high_b_threshold = Entry(frm_prepa, width=10)
self.txt_high_b_threshold.grid(row=ii, column=4)
frm_prepa.grid_columnconfigure(1, weight=1)
frm_prepa.grid(row=i,
rowspan=ii + 1,
column=0,
columnspan=6,
sticky=NSEW)
ii += 1
i += ii
# TOPUP/EDDY or Rigid registration
i += 1
Label(self,
text=' TOPUP/EDDY or Rigid registration').grid(row=i,
column=0,
columnspan=2,
sticky=W)
i += 1
frm_eddy = Frame(self)
width = 10
ii = 0
jj = 0
Label(frm_eddy, text='TOPUP', width=width, justify=RIGHT,
anchor=E).grid(row=ii, column=jj, sticky=E)
jj += 1
self.txt_topup_app = Entry(frm_eddy, width=width)
self.txt_topup_app.grid(row=ii, column=jj)
jj += 1
Label(frm_eddy, text='Configure', width=width, justify=RIGHT,
anchor=E).grid(row=ii, column=jj, sticky=E)
jj += 1
self.txt_topup_config = Entry(frm_eddy)
self.txt_topup_config.grid(row=ii, column=jj, sticky=EW)
jj += 1
btn_topup_config = Button(
frm_eddy,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_topup_config))
btn_topup_config.grid(row=ii, column=jj, sticky=W)
jj += 1
Label(frm_eddy, text='EDDY', width=width, justify=RIGHT,
anchor=E).grid(row=ii, column=jj, sticky=E)
jj += 1
self.txt_eddy_app = Entry(frm_eddy, width=width)
self.txt_eddy_app.grid(row=ii, column=jj)
frm_eddy.grid(row=i,
rowspan=ii + 1,
column=0,
columnspan=6,
sticky=NSEW)
frm_eddy.grid_columnconfigure(3, weight=1)
i += ii
i += 1
Label(self, text='B0', width=labelWidth).grid(row=i, column=0)
self.txt_b0 = Entry(self)
self.txt_b0.grid(row=i, column=1, sticky=EW)
btn_b0 = Button(self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_b0))
btn_b0.grid(row=i, column=2, sticky=W)
btn_topup = Button(self, text='TOPUP', command=self.run_topup)
btn_topup.grid(row=i, column=4, rowspan=2, sticky=NS)
btn_rigid = Button(self, text='Rigid\nReg', command=self.run_eddy)
btn_rigid.grid(row=i, column=5, rowspan=4, sticky=NS)
i += 1
Label(self, text='B0 mask', width=labelWidth).grid(row=i, column=0)
self.txt_b0mask = Entry(self)
self.txt_b0mask.grid(row=i, column=1, sticky=EW)
btn_b0mask = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_b0mask))
btn_b0mask.grid(row=i, column=2, sticky=W)
btn_b0mask_make = Button(
self,
text='Make',
command=lambda: self.make_mask(
self.txt_b0.get(), mask4d=True, rtn=self.txt_b0mask))
btn_b0mask_make.grid(row=i, column=3)
i += 1
Label(self, text='DWI', width=labelWidth).grid(row=i, column=0)
self.txt_dwi = Entry(self)
self.txt_dwi.grid(row=i, column=1, sticky=EW)
btn_dwi_eddy = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_dwi))
btn_dwi_eddy.grid(row=i, column=2, sticky=W)
btn_eddy = Button(self, text='EDDY', command=self.run_eddy)
btn_eddy.grid(row=i, column=4, rowspan=2, sticky=NS)
i += 1
Label(self, text='DWI mask', width=labelWidth).grid(row=i, column=0)
self.txt_dwi_mask = Entry(self)
self.txt_dwi_mask.grid(row=i, column=1, sticky=EW)
btn_dwi_mask = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_dwi_mask))
btn_dwi_mask.grid(row=i, column=2, sticky=W)
btn_dwi_mask_make = Button(
self,
text='Make',
command=lambda: self.make_mask(self.txt_dwi.get(),
rtn=self.txt_dwi_mask))
btn_dwi_mask_make.grid(row=i, column=3)
i += 1
Label(self, text='Output', width=labelWidth).grid(row=i, column=0)
self.txt_output_eddy = Entry(self)
self.txt_output_eddy.grid(row=i, column=1, sticky=EW)
btn_output_eddy = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_output_eddy))
btn_output_eddy.grid(row=i, column=2, sticky=W)
btn_output_eddy_auto = Button(self,
text='Auto',
command=self.gen_eddy_outputname)
btn_output_eddy_auto.grid(row=i, column=3)
# 2D registration
i += 1
Label(self,
text=' 2D registration (X-Y translation)').grid(row=i,
column=0,
columnspan=2,
sticky=W)
i += 1
frm_param = Frame(self)
width = 12
width_half = 6
ii = 0
jj = 0
Label(frm_param,
text='Multi band',
width=width,
justify=RIGHT,
anchor=E).grid(row=ii, column=jj, sticky=E)
#jj += 1; self.txt_multiband = Entry(frm_param, width=width_half); self.txt_multiband.grid(row=ii, column=jj)
jj += 1
self.spin_multiband = Spinbox(frm_param,
from_=0,
to=1000,
increment=1,
width=width_half)
self.spin_multiband.grid(row=ii, column=jj)
jj += 1
Label(frm_param,
text='#iteration',
width=width,
justify=RIGHT,
anchor=E).grid(row=ii, column=jj, sticky=E)
#jj += 1; self.txt_nitr = Entry(frm_param, width=width_half); self.txt_nitr.grid(row=ii, column=jj)
jj += 1
self.spin_nitr = Spinbox(frm_param,
from_=0,
to=1000,
increment=1,
width=width_half)
self.spin_nitr.grid(row=ii, column=jj)
jj += 1
Label(frm_param, text='', width=width, justify=RIGHT,
anchor=E).grid(row=ii, column=jj, sticky=E)
jj += 1
self.chk_nosearch = Checkbutton(frm_param,
text='nosearch',
variable=self.nosearch,
width=width)
self.chk_nosearch.grid(row=ii, column=jj)
jj += 1
self.chk_noresample = Checkbutton(frm_param,
text='noresample',
variable=self.noresample,
width=width)
self.chk_noresample.grid(row=ii, column=jj)
ii += 1
jj = 0
Label(frm_param, text='Schedule').grid(row=ii, column=jj, sticky=E)
jj += 1
self.txt_reg_config = Entry(frm_param)
self.txt_reg_config.grid(row=ii, column=jj, sticky=EW, columnspan=4)
jj += 4
btn_reg_config = Button(
frm_param,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_reg_config))
btn_reg_config.grid(row=ii, column=jj, sticky=W)
frm_param.grid_columnconfigure(4, weight=1)
frm_param.grid(row=i,
rowspan=ii + 1,
column=0,
columnspan=6,
sticky=NSEW)
i += ii
i += 1
Label(self, text='DWI', width=labelWidth).grid(row=i, column=0)
self.txt_dwi_eddy = Entry(self)
self.txt_dwi_eddy.grid(row=i, column=1, sticky=EW)
btn_dwi_eddy = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_dwi_eddy))
btn_dwi_eddy.grid(row=i, column=2, sticky=W)
btn_dwi_eddy_copy = Button(
self,
text='Copy',
command=lambda: self.reset_entry(self.txt_dwi_eddy,
self.txt_output_eddy.get()))
btn_dwi_eddy_copy.grid(row=i, column=3)
btn_dwi_eddy = Button(self,
text='Save\nParam',
command=self.save_reg_param)
btn_dwi_eddy.grid(row=i, column=4, rowspan=2, sticky=NSEW)
btn_dwi_eddy = Button(self, text='XY-Reg', command=self.run_xy_reg)
btn_dwi_eddy.grid(row=i, column=5, rowspan=2, sticky=NSEW)
i += 1
Label(self, text='Mask', width=labelWidth).grid(row=i, column=0)
self.txt_reg_mask = Entry(self)
self.txt_reg_mask.grid(row=i, column=1, sticky=EW)
btn_reg_mask = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_reg_mask))
btn_reg_mask.grid(row=i, column=2, sticky=W)
btn_reg_mask_make = Button(
self,
text='Make',
command=lambda: self.make_mask(self.txt_dwi_eddy.get(),
rtn=self.txt_reg_mask))
btn_reg_mask_make.grid(row=i, column=3)
i += 1
Label(self, text='Slices', width=labelWidth).grid(row=i, column=0)
self.txt_reg_slices = Entry(self)
self.txt_reg_slices.grid(row=i, column=1, sticky=EW)
i += 1
Label(self, text='Outlier', width=labelWidth).grid(row=i, column=0)
self.txt_reg_outlier = Entry(self)
self.txt_reg_outlier.grid(row=i, column=1, sticky=EW)
btn_reg_outlier = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_reg_outlier))
btn_reg_outlier.grid(row=i, column=2, sticky=W)
btn_reg_outlier_calculate = Button(self,
text='Calculate',
command=self.run_xy_reg_outlier)
btn_reg_outlier_calculate.grid(row=i, column=3)
btn_reg_apply = Button(self,
text='Applywarp',
command=self.run_applywarp)
btn_reg_apply.grid(row=i, column=4, columnspan=2, sticky=EW)
i += 1
Label(self, text='Output', width=labelWidth).grid(row=i, column=0)
self.txt_output_reg = Entry(self)
self.txt_output_reg.grid(row=i, column=1, sticky=EW)
btn_output_reg = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_output_reg))
btn_output_reg.grid(row=i, column=2, sticky=W)
btn_output_reg_auto = Button(self,
text='Auto',
command=self.gen_reg_outputname)
btn_output_reg_auto.grid(row=i, column=3)
# DTI
i += 1
Label(self, text=' DTI map with outlier rejection').grid(row=i,
column=0,
columnspan=2,
sticky=W)
i += 1
Label(self, text='DWI_reg', width=labelWidth).grid(row=i, column=0)
self.txt_dwi_dti = Entry(self)
self.txt_dwi_dti.grid(row=i, column=1, sticky=EW)
btn_dwi_dti = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_dwi_dti))
btn_dwi_dti.grid(row=i, column=2, sticky=W)
btn_dwi_dti_copy = Button(
self,
text='Copy',
command=lambda: self.reset_entry(self.txt_dwi_dti,
self.txt_output_reg.get()))
btn_dwi_dti_copy.grid(row=i, column=3)
btn_dti_maps = Button(self,
text='Generate DTI maps',
command=self.run_generate_dti_maps)
btn_dti_maps.grid(row=i, column=4, columnspan=2, sticky=EW)
i += 1
Label(self, text='DTI', width=labelWidth).grid(row=i, column=0)
self.txt_dti = Entry(self)
self.txt_dti.grid(row=i, column=1, sticky=EW)
btn_dti = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_dti))
btn_dti.grid(row=i, column=2, sticky=W)
btn_dti_auto = Button(self, text='Auto', command=self.gen_dti_name)
btn_dti_auto.grid(row=i, column=3)
btn_dti_outlier_calc = Button(self,
text='Calculate Outlier',
command=self.run_dti_outlier)
btn_dti_outlier_calc.grid(row=i,
column=4,
columnspan=2,
rowspan=2,
sticky=NSEW)
i += 1
Label(self, text='Mask', width=labelWidth).grid(row=i, column=0)
self.txt_md_mask = Entry(self)
self.txt_md_mask.grid(row=i, column=1, sticky=EW)
btn_md_mask = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_md_mask))
btn_md_mask.grid(row=i, column=2, sticky=W)
btn_md_mask_make = Button(self, text='Make', command=self.run_md_mask)
btn_md_mask_make.grid(row=i, column=3)
i += 1
Label(self, text='Outlier', width=labelWidth).grid(row=i, column=0)
self.txt_dti_outlier = Entry(self)
self.txt_dti_outlier.grid(row=i, column=1, sticky=EW)
btn_dti_outlier = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_dti_outlier))
btn_dti_outlier.grid(row=i, column=2, sticky=W)
btn_dti_maps_itr = Button(
self,
text='Generate DTI maps',
command=lambda: self.run_generate_dti_maps(outlier=True))
btn_dti_maps_itr.grid(row=i, column=4, columnspan=2, sticky=EW)
#i += 1
#Label(self, text='DWI' , width=labelWidth).grid(row=i, column=0)
#self.txt_dwi_dti_itr = Entry(self); self.txt_dwi_dti_itr.grid(row=i, column=1, sticky=EW)
#btn_dwi_dti_itr = Button(self, text='...', width=dddWidth, command=lambda:self.filenameDialog_text(self.txt_dwi_dti_itr))
#btn_dwi_dti_itr.grid(row=i, column=2, sticky=W)
#i += 1; Label(self, text='Output' , width=labelWidth).grid(row=i, column=0)
#self.txt_output_dti = Entry(self); self.txt_output_dti.grid(row=i, column=1, sticky=EW)
#btn_output_dti = Button(self, text='...', width=dddWidth, command=lambda:self.filenameDialog_text(self.txt_output_dti))
#btn_output_dti.grid(row=i, column=2, sticky=W)
#btn_output_dti_auto = Button(self, text='Auto', command=self.gen_dti_outputname); btn_output_dti_auto.grid(row=i, column=3)
# DTI Values
i += 1
Label(self, text=' DTI values').grid(row=i,
column=0,
columnspan=2,
sticky=W)
i += 1
Label(self, text='DTI', width=labelWidth).grid(row=i, column=0)
self.txt_dti_value = Entry(self)
self.txt_dti_value.grid(row=i, column=1, sticky=EW)
btn_dti_value = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_dti_value))
btn_dti_value.grid(row=i, column=2, sticky=W)
btn_dwi_dti_value_copy = Button(
self,
text='Copy',
command=lambda: self.reset_entry(self.txt_dti_value,
self.txt_dti.get()))
btn_dwi_dti_value_copy.grid(row=i, column=3)
btn_dti_value_get = Button(self,
text='Get DTI\nValues',
command=self.run_get_dti_values)
btn_dti_value_get.grid(row=i,
column=4,
rowspan=2,
columnspan=2,
sticky=NSEW)
i += 1
Label(self, text='ROI', width=labelWidth).grid(row=i, column=0)
self.txt_dti_roi = Entry(self)
self.txt_dti_roi.grid(row=i, column=1, sticky=EW)
btn_dti_roi = Button(
self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(self.txt_dti_roi))
btn_dti_roi.grid(row=i, column=2, sticky=W)
btn_dti_roi = Button(self, text='Make')
btn_dti_roi.grid(row=i, column=3)
i += 1
Label(self, text='Output', width=labelWidth).grid(row=i, column=0)
self.txt_output_dti_value = Entry(self)
self.txt_output_dti_value.grid(row=i, column=1, sticky=EW)
btn_output_dti_value = Button(self,
text='...',
width=dddWidth,
command=lambda: self.filenameDialog_text(
self.txt_output_dti_value))
btn_output_dti_value.grid(row=i, column=2, sticky=W)
btn_output_dti_value_auto = Button(
self, text='Auto', command=self.gen_dti_value_outputname)
btn_output_dti_value_auto.grid(row=i, column=3)
self.grid_columnconfigure(1, weight=1)
ni = i + 1
for i in range(ni):
self.grid_rowconfigure(i, weight=1, minsize=20)
self.pack(fill=BOTH, expand=True)
# Spinbox callback
def _spin():
value = spin.get()
#print(value)
#scr.insert(tk.INSERT, value + '\n')
def _spin2():
value = spin2.get()
#print(value)
#scr.insert(tk.INSERT, value + '\n')
# Adding 2 Spinbox widget using a set of values
spin = Spinbox(monty, from_=10, to=25, width=5, bd=8, command=_spin)
spin.grid(column=0, row=2)
spin2 = Spinbox(monty,
values=('Python3入门', 'C语言', 'C++', 'Java', 'OpenCV'),
width=13,
bd=3,
command=_spin2)
spin2.grid(column=1, row=2, sticky='W')
# Using a scrolled Text control
#scrolW = 30; scrolH = 5
#scr = scrolledtext.ScrolledText(monty, width=scrolW, height=scrolH, wrap=tk.WORD)
#scr.grid(column=0, row=3, sticky='WE', columnspan=3)
# Add Tooltip
def initUI(self):
self.parent.title("DBLR for Dummies")
self.pack(fill=BOTH, expand=True)
#self.columnconfigure(0, weight=1)
#self.rowconfigure(0, weight=1)
# weight attibute is used to make them growable
self.meas = IntVar()
self.point = IntVar()
self.base_path = StringVar()
self.coef = DoubleVar()
self.noise = DoubleVar()
self.n_sigma = DoubleVar()
self.thr1 = DoubleVar()
self.thr2 = DoubleVar()
self.thr3 = DoubleVar()
self.graph_sw = BooleanVar()
#Image
factor = 0.65
search = Image.open("NEXT_official_logo.jpg")
width_org, height_org = search.size
search_temp = search.resize(
(int(width_org * factor), int(height_org * factor)),
Image.ANTIALIAS)
search_aux = ImageTk.PhotoImage(search_temp)
label1 = Label(self, image=search_aux)
label1.image = search_aux
label1.grid(row=0, column=4, columnspan=2, rowspan=3, padx=5)
#self.base_path.set("F:/DATOS_DAC/2052/pmt_0_trace_evt_")
self.base_path.set("Argon.h5.z")
e1 = Entry(self, textvariable=self.base_path, width=40)
e1.grid(row=0, column=1, sticky=W, columnspan=3, pady=5, padx=5)
e1_label = Label(self, text="Path & Name")
e1_label.grid(row=0, column=0, columnspan=1, sticky=E, pady=5, padx=5)
self.point.set("0")
sb1 = Spinbox(self, from_=0, to=100, width=4, textvariable=self.point)
sb1.grid(row=2, column=1, sticky=W, pady=5, padx=5)
sb1_label = Label(self, text="PMT")
sb1_label.grid(row=2, column=0, padx=5, sticky=E)
self.meas.set("0")
sb1 = Spinbox(self, from_=0, to=100, width=4, textvariable=self.meas)
sb1.grid(row=2, column=3, sticky=W, pady=5, padx=5)
sb1_label = Label(self, text="Event")
sb1_label.grid(row=2, column=2, padx=5, sticky=E)
#Check buttons
# cb1 = Checkbutton(self, text="New Graph", variable=self.graph_sw)
# cb1.select()
# cb1.grid(row=2,column=2, sticky=W)
#PARAMETERS
Integration_label = Label(self,
text="PARAMETERS",
font="Verdana 12 bold")
Integration_label.grid(row=3,
column=1,
padx=5,
columnspan=2,
pady=10,
sticky=E)
self.coef.set("1.65E-3")
e2 = Entry(self, width=12, textvariable=self.coef)
e2.grid(row=4, column=1, sticky=W, pady=5, padx=5)
e2_label = Label(self, text="DBLR Coef")
e2_label.grid(row=4, column=0, sticky=E, pady=5, padx=5)
self.noise.set("0.75")
e3 = Entry(self, width=12, textvariable=self.noise)
e3.grid(row=4, column=3, sticky=W, pady=5, padx=5)
e3_label = Label(self, text="Noise (LSB)")
e3_label.grid(row=4, column=2, sticky=E, pady=5, padx=5)
self.n_sigma.set("4")
e4 = Entry(self, width=12, textvariable=self.n_sigma)
e4.grid(row=4, column=5, sticky=W, pady=5, padx=5)
e4_label = Label(self, text="Noise Threshold")
e4_label.grid(row=4, column=4, sticky=E, pady=5, padx=5)
self.thr1.set("0")
e5 = Entry(self, width=12, textvariable=self.thr1)
e5.grid(row=5, column=1, sticky=W, pady=5, padx=5)
e5_label = Label(self, text="Threshold 1")
e5_label.grid(row=5, column=0, sticky=E, pady=5, padx=5)
self.thr2.set("0")
e6 = Entry(self, width=12, textvariable=self.thr2)
e6.grid(row=5, column=3, sticky=W, pady=5, padx=5)
e6_label = Label(self, text="Threshold 2")
e6_label.grid(row=5, column=2, sticky=E, pady=5, padx=5)
self.thr3.set("0")
e7 = Entry(self, width=12, textvariable=self.thr3)
e7.grid(row=5, column=5, sticky=W, pady=5, padx=5)
e7_label = Label(self, text="Threshold 3")
e7_label.grid(row=5, column=4, sticky=E, pady=5, padx=5)
# Main buttons
obtn = Button(self, text="GO!!", command=self.DBLR_f)
obtn.grid(row=6, column=4, sticky=E, pady=10)
cbtn = Button(self, text="Quit", command=self.quit)
cbtn.grid(row=6, column=5, sticky=E, pady=10)
hbtn = Button(self, text="Help", command=self.help_f)
hbtn.grid(row=6, column=0, sticky=W, pady=10)
def initUI(self):
self.parent.title("Drone control")
self.style = Style()
self.style.theme_use("default")
self.pack(fill=BOTH, expand=1)
self.parent.bind_all("<Key>", self._keyDown)
self.parent.bind_all("<KeyRelease>", self._keyUp)
if system() == "Linux":
self.parent.bind_all("<Button-4>", self._onMouseWheelUp)
self.parent.bind_all("<Button-5>", self._onMouseWheelDown)
else:
#case of Windows
self.parent.bind_all("<MouseWheel>", self._onMouseWheel)
#Commands
commandsFrame = tkFrame(self)
commandsFrame.grid(column=0, row=0, sticky="WE")
self._started = IntVar()
self._startedCB = Checkbutton(commandsFrame,
text="On",
variable=self._started,
command=self._startedCBChanged)
self._startedCB.pack(side=LEFT, padx=4)
# self._integralsCB = Checkbutton(commandsFrame, text="Int.", variable=self._integralsEnabled, \
# command=self._integralsCBChanged, state=DISABLED)
# self._integralsCB.pack(side=LEFT, padx=4)
self._quitButton = Button(commandsFrame,
text="Quit",
command=self.exit)
self._quitButton.pack(side=LEFT, padx=2, pady=2)
# self._angleLbl = Label(commandsFrame, text="Angle")
# self._angleLbl.pack(side=LEFT, padx=4)
#
# self._angleEntry = Entry(commandsFrame, state=DISABLED)
# self._angleEntry.pack(side=LEFT)
#Info
infoFrame = tkFrame(self)
infoFrame.grid(column=1, row=1, sticky="NE", padx=4)
#Throttle
Label(infoFrame, text="Throttle").grid(column=0, row=0, sticky="WE")
self._throttleTexts = [
StringVar(), StringVar(),
StringVar(), StringVar()
]
Entry(infoFrame,
textvariable=self._throttleTexts[3],
state=DISABLED,
width=5).grid(column=0, row=1)
Entry(infoFrame,
textvariable=self._throttleTexts[0],
state=DISABLED,
width=5).grid(column=1, row=1)
Entry(infoFrame,
textvariable=self._throttleTexts[2],
state=DISABLED,
width=5).grid(column=0, row=2)
Entry(infoFrame,
textvariable=self._throttleTexts[1],
state=DISABLED,
width=5).grid(column=1, row=2)
#Angles
Label(infoFrame, text="Angles").grid(column=0, row=3, sticky="WE")
self._angleTexts = [StringVar(), StringVar(), StringVar()]
for index in range(3):
Entry(infoFrame,
textvariable=self._angleTexts[index],
state=DISABLED,
width=5).grid(column=index, row=4)
#Accels
Label(infoFrame, text="Accels").grid(column=0, row=5, sticky="WE")
self._accelTexts = [StringVar(), StringVar(), StringVar()]
for index in range(3):
Entry(infoFrame,
textvariable=self._accelTexts[index],
state=DISABLED,
width=5).grid(column=index, row=6)
#Speeds
Label(infoFrame, text="Speeds").grid(column=0, row=7, sticky="WE")
self._speedTexts = [StringVar(), StringVar(), StringVar()]
for index in range(3):
Entry(infoFrame,
textvariable=self._speedTexts[index],
state=DISABLED,
width=5).grid(column=index, row=8)
#Height
Label(infoFrame, text="Height").grid(column=0, row=9, sticky="E")
self._heightText = StringVar()
Entry(infoFrame,
textvariable=self._heightText,
state=DISABLED,
width=5).grid(column=1, row=9)
#Loop rate
Label(infoFrame, text="Loop @").grid(column=0, row=10, sticky="E")
self._loopRateText = StringVar()
Entry(infoFrame,
textvariable=self._loopRateText,
state=DISABLED,
width=5).grid(column=1, row=10)
Label(infoFrame, text="Hz").grid(column=2, row=10, sticky="W")
#control
controlFrame = tkFrame(self)
controlFrame.grid(column=0, row=1, sticky="W")
self._throttle = DoubleVar()
if Cockpit.THROTTLE_BY_USER:
self._thrustScale = Scale(controlFrame, orient=VERTICAL, from_=100.0, to=0.0, \
tickinterval=0, variable=self._throttle, resolution=Cockpit.THROTTLE_RESOLUTION, \
length=200, showvalue=1, \
state=DISABLED,
command=self._onThrustScaleChanged)
else:
self._thrustScale = Scale(controlFrame, orient=VERTICAL, from_=100.0, to=-100.0, \
tickinterval=0, variable=self._throttle, \
length=200, showvalue=1, \
state=DISABLED,
command=self._onThrustScaleChanged)
self._thrustScale.bind("<Double-Button-1>",
self._onThrustScaleDoubleButton1, "+")
self._thrustScale.grid(column=0)
self._shiftCanvas = Canvas(controlFrame, bg="white", height=400, width=400, \
relief=SUNKEN)
self._shiftCanvas.bind("<Button-1>", self._onMouseButton1)
#self._shiftCanvas.bind("<ButtonRelease-1>", self._onMouseButtonRelease1)
self._shiftCanvas.bind("<B1-Motion>", self._onMouseButton1Motion)
self._shiftCanvas.bind("<Double-Button-1>", self._onMouseDoubleButton1)
self._shiftCanvas.bind("<Button-3>", self._onMouseButton3)
#self._shiftCanvas.bind("<ButtonRelease-3>", self._onMouseButtonRelease3)
self._shiftCanvas.bind("<B3-Motion>", self._onMouseButton3Motion)
self._shiftCanvas.grid(row=0, column=1, padx=2, pady=2)
self._shiftCanvas.create_oval(1, 1, 400, 400, outline="#ff0000")
self._shiftCanvas.create_line(200, 2, 200, 400, fill="#ff0000")
self._shiftCanvas.create_line(2, 200, 400, 200, fill="#ff0000")
self._shiftMarker = self._shiftCanvas.create_oval(196,
196,
204,
204,
outline="#0000ff",
fill="#0000ff")
self._yaw = DoubleVar()
self._yawScale = Scale(controlFrame, orient=HORIZONTAL, from_=-100.0, to=100.0, \
tickinterval=0, variable=self._yaw, \
length=200, showvalue=1, \
command=self._onYawScaleChanged)
self._yawScale.bind("<Double-Button-1>", self._onYawScaleDoubleButton1,
"+")
self._yawScale.grid(row=1, column=1)
self._controlKeyActive = False
#PID calibration
pidCalibrationFrame = tkFrame(self)
pidCalibrationFrame.grid(column=0, row=2, sticky="WE")
self._pidSelected = StringVar()
self._pidSelected.set("--")
self._pidListBox = OptionMenu(pidCalibrationFrame, self._pidSelected, "--", \
Cockpit.KEY_ANG_SPEED, Cockpit.KEY_ANGLES, Cockpit.KEY_ACCEL, \
command=self._onPidListBoxChanged)
self._pidListBox.pack(side=LEFT, padx=2)
self._pidListBox.config(width=10)
self._axisSelected = StringVar()
self._axisSelected.set("--")
self._axisListBox = OptionMenu(pidCalibrationFrame, self._axisSelected, "--", "X", "Y", "Z", \
command=self._onAxisListBoxChanged)
self._axisListBox.pack(side=LEFT, padx=2)
self._axisListBox.config(state=DISABLED)
Label(pidCalibrationFrame, text="P").pack(side=LEFT, padx=(14, 2))
self._pidPString = StringVar()
self._pidPString.set("0.00")
self._pidPSpinbox = Spinbox(pidCalibrationFrame, width=5, from_=0.0, to=10000.0, increment=0.01, state=DISABLED, \
textvariable=self._pidPString, command=self._onPidSpinboxChanged)
self._pidPSpinbox.pack(side=LEFT, padx=2)
Label(pidCalibrationFrame, text="I").pack(side=LEFT, padx=(14, 2))
self._pidIString = StringVar()
self._pidIString.set("0.00")
self._pidISpinbox = Spinbox(pidCalibrationFrame, width=5, from_=0.0, to=10000.0, increment=0.01, state=DISABLED, \
textvariable=self._pidIString, command=self._onPidSpinboxChanged)
self._pidISpinbox.pack(side=LEFT, padx=2)
Label(pidCalibrationFrame, text="D").pack(side=LEFT, padx=(14, 2))
self._pidDString = StringVar()
self._pidDString.set("0.00")
self._pidDSpinbox = Spinbox(pidCalibrationFrame, width=5, from_=0.0, to=10000.0, increment=0.01, state=DISABLED, \
textvariable=self._pidDString, command=self._onPidSpinboxChanged)
self._pidDSpinbox.pack(side=LEFT, padx=2)
#debug
debugFrame = tkFrame(self)
debugFrame.grid(column=0, row=3, sticky="WE")
self._debugMsg = Message(debugFrame,
anchor="nw",
justify=LEFT,
relief=SUNKEN,
width=300)
self._debugMsg.pack(fill=BOTH, expand=1)
def __init__(self, master, max_num_features, num_frames, mser_image):
Toplevel.__init__(self, master)
self.protocol('WM_DELETE_WINDOW', self.withdraw)
self.notebook = ttk.Notebook(self)
frame_feats = ttk.Frame(self.notebook)
frame_forest = ttk.Frame(self.notebook)
frame_mser = ttk.Frame(self.notebook)
frame_other = ttk.Frame(self.notebook)
self.notebook.add(frame_feats, text="Features ")
self.notebook.add(frame_forest, text=" Forest ")
self.notebook.add(frame_mser, text=" MSER ")
self.notebook.add(frame_other, text=" Other ")
self.max_num_feats = max_num_features
self.selection = None
self.mser_image = mser_image
rand_row = random.randint(1, 512 - 200)
rand_col = random.randint(1, 512 - 110)
self.mser_area = mser_image[rand_row:rand_row + 180,
rand_col:rand_col + 100]
# read images from icons folder
self.hf0_img = PhotoImage(file="./icons/hf0.gif")
self.hf1_img = PhotoImage(file="./icons/hf1.gif")
self.hf2_img = PhotoImage(file="./icons/hf2.gif")
self.hf3_img = PhotoImage(file="./icons/hf3.gif")
self.hf4_img = PhotoImage(file="./icons/hf4.gif")
self.hf5_img = PhotoImage(file="./icons/hf5.gif")
self.features_vars = list()
for i in range(max_num_features):
self.features_vars.append(IntVar())
Label(frame_feats,
text="Patch size (" + u"\N{GREEK SMALL LETTER PI}" + "):").grid(
row=0, column=0, pady=5)
self.patch_size_spinbox = Spinbox(frame_feats, from_=3, to=30, width=3)
self.patch_size_spinbox.delete(0, END)
self.patch_size_spinbox.insert(END, 10)
self.patch_size_spinbox.grid(row=0, column=1, padx=5)
f1 = ttk.Labelframe(frame_feats, text='Mean filter')
f1.grid(row=1, columnspan=2)
Label(f1, text=u"\N{GREEK SMALL LETTER PI}").grid(row=0, column=0)
Checkbutton(f1, text="R",
variable=self.features_vars[0]).grid(row=0, column=1)
Checkbutton(f1, text="G",
variable=self.features_vars[1]).grid(row=0, column=2)
Checkbutton(f1, text="B",
variable=self.features_vars[2]).grid(row=0, column=3)
Label(f1, text=u"\N{GREEK SMALL LETTER PI}" + "/2").grid(row=1,
column=0)
Checkbutton(f1, text="R",
variable=self.features_vars[3]).grid(row=1, column=1)
Checkbutton(f1, text="G",
variable=self.features_vars[4]).grid(row=1, column=2)
Checkbutton(f1, text="B",
variable=self.features_vars[5]).grid(row=1, column=3)
f2 = ttk.Labelframe(frame_feats, text="Gaussian filter")
f2.grid(row=2, columnspan=2)
Label(f2, text=str(1.0)).grid(row=0, column=0)
Checkbutton(f2, text="R",
variable=self.features_vars[6]).grid(row=0, column=1)
Checkbutton(f2, text="G",
variable=self.features_vars[7]).grid(row=0, column=2)
Checkbutton(f2, text="B",
variable=self.features_vars[8]).grid(row=0, column=3)
Label(f2, text=str(3.5)).grid(row=1, column=0)
Checkbutton(f2, text="R",
variable=self.features_vars[9]).grid(row=1, column=1)
Checkbutton(f2, text="G",
variable=self.features_vars[10]).grid(row=1, column=2)
Checkbutton(f2, text="B",
variable=self.features_vars[11]).grid(row=1, column=3)
f3 = ttk.Labelframe(frame_feats, text="Laplacian of gaussian")
f3.grid(row=3, columnspan=2)
Label(f3, text=str(2.0)).grid(row=0, column=0)
Checkbutton(f3, text="R",
variable=self.features_vars[12]).grid(row=0, column=1)
Checkbutton(f3, text="G",
variable=self.features_vars[13]).grid(row=0, column=2)
Checkbutton(f3, text="B",
variable=self.features_vars[14]).grid(row=0, column=3)
Label(f3, text=str(3.5)).grid(row=1, column=0)
Checkbutton(f3, text="R",
variable=self.features_vars[15]).grid(row=1, column=1)
Checkbutton(f3, text="G",
variable=self.features_vars[16]).grid(row=1, column=2)
Checkbutton(f3, text="B",
variable=self.features_vars[17]).grid(row=1, column=3)
f4 = ttk.Labelframe(frame_feats, text="Haar-like features")
f4.grid(row=1, rowspan=2, column=3, padx=5)
Checkbutton(f4, image=self.hf0_img,
variable=self.features_vars[18]).grid(row=0, column=0)
Checkbutton(f4, image=self.hf1_img,
variable=self.features_vars[19]).grid(row=0, column=1)
Checkbutton(f4, image=self.hf2_img,
variable=self.features_vars[20]).grid(row=1, column=0)
Checkbutton(f4, image=self.hf3_img,
variable=self.features_vars[21]).grid(row=1, column=1)
Checkbutton(f4, image=self.hf4_img,
variable=self.features_vars[22]).grid(row=2, column=0)
Checkbutton(f4, image=self.hf5_img,
variable=self.features_vars[23]).grid(row=2, column=1)
buttons_paned_window = PanedWindow(frame_feats, orient=VERTICAL)
buttons_paned_window.grid(row=3, column=3)
self.select_all_button = Button(buttons_paned_window,
text="Select all",
command=self._select_all)
buttons_paned_window.add(self.select_all_button)
self.clear_selection_button = Button(buttons_paned_window,
text="Clear selection",
command=self._clear_selection)
buttons_paned_window.add(self.clear_selection_button)
# default values
for j in [0, 1, 3, 6, 7, 9, 15, 21, 23]:
self.features_vars[j].set(1)
# FOREST FRAMES
# number of trees
f5 = ttk.Labelframe(frame_forest, text="Number of trees")
f5.grid(row=0, columnspan=2, pady=5, padx=5)
Label(f5, text="N").grid(row=1, column=0)
self.num_trees_scale = Scale(f5,
from_=5,
to=500,
resolution=5,
orient=HORIZONTAL)
self.num_trees_scale.set(300)
self.num_trees_scale.grid(row=0, column=1, rowspan=2)
# depth single tree
f6 = ttk.Labelframe(frame_forest, text="Depth single tree")
f6.grid(row=1, columnspan=2, pady=5, padx=5)
Label(f6, text="d").grid(row=1, column=0)
self.depth_tree_scale = Scale(f6, from_=2, to=20, orient=HORIZONTAL)
self.depth_tree_scale.set(3)
self.depth_tree_scale.grid(row=0, column=1, rowspan=2)
# percentage number of features
f7 = ttk.Labelframe(frame_forest, text="% subset of features")
f7.grid(row=2, columnspan=2, pady=5, padx=5)
Label(f7, text="m").grid(row=1, column=0)
self.percentage_feats_scale = Scale(f7,
from_=0.0,
to=1,
resolution=0.05,
orient=HORIZONTAL)
self.percentage_feats_scale.set(0.5)
self.percentage_feats_scale.grid(row=0, column=1, rowspan=2)
# mser frame
# delta
f8 = ttk.Labelframe(frame_mser, text="Delta")
f8.grid(row=0, columnspan=2, pady=5, padx=5)
Label(f8, text=u"\N{GREEK SMALL LETTER DELTA}").grid(row=1, column=0)
self.delta_scale = Scale(f8,
from_=1,
to=10,
resolution=1,
orient=HORIZONTAL)
self.delta_scale.set(2)
self.delta_scale.grid(row=0, column=1, rowspan=2)
# min area
f9 = ttk.Labelframe(frame_mser, text="Minimum area")
f9.grid(row=1, columnspan=2, pady=5, padx=5)
Label(f9, text="m").grid(row=1, column=0)
self.min_area_scale = Scale(f9, from_=2, to=200, orient=HORIZONTAL)
self.min_area_scale.set(10)
self.min_area_scale.grid(row=0, column=1, rowspan=2)
# percentage number of features
f10 = ttk.Labelframe(frame_mser, text="Maximum area")
f10.grid(row=2, columnspan=2, pady=5, padx=5)
Label(f10, text="M").grid(row=1, column=0)
self.max_area_scale = Scale(f10,
from_=50,
to=1000,
resolution=5,
orient=HORIZONTAL)
self.max_area_scale.set(350)
self.max_area_scale.grid(row=0, column=1, rowspan=2)
# mser image
f11 = ttk.Labelframe(frame_mser)
f11.grid(row=0, rowspan=3, column=2, padx=5)
self.mser_img_array = Image.fromarray(self.mser_area, "RGB")
self.mser_img = ImageTk.PhotoImage(self.mser_img_array)
img_label = Label(f11, image=self.mser_img)
img_label.grid(row=0, column=0)
buttons_p_w_mser = PanedWindow(f11, orient=HORIZONTAL)
try_button = Button(f11, text="Try", command=self.try_mser)
buttons_p_w_mser.add(try_button)
change_button = Button(f11, text="New img", command=self.change_mser)
buttons_p_w_mser.add(change_button)
buttons_p_w_mser.grid(row=1, column=0)
# other frame
f12 = ttk.Labelframe(frame_other, text="Refinement")
f12.grid(row=0, columnspan=2, pady=5, padx=5)
Label(f12, text=u"\N{GREEK CAPITAL LETTER PHI}_l").grid(row=1,
column=0)
self.low_thresh_scale = Scale(f12,
from_=0,
to=1,
resolution=0.05,
orient=HORIZONTAL,
length=90)
self.low_thresh_scale.set(0.45)
self.low_thresh_scale.grid(row=0, column=1, rowspan=2)
Label(f12, text=u"\N{GREEK CAPITAL LETTER PHI}_h").grid(row=3,
column=0)
self.high_thresh_scale = Scale(f12,
from_=0,
to=1,
resolution=0.05,
orient=HORIZONTAL,
length=90)
self.high_thresh_scale.set(0.65)
self.high_thresh_scale.grid(row=2, column=1, rowspan=2)
f13 = ttk.Labelframe(frame_other, text="Dots distance")
f13.grid(row=1, columnspan=2, pady=5, padx=5)
Label(f13, text=u" \N{GREEK SMALL LETTER SIGMA}").grid(row=1,
column=0)
self.dots_distance_scale = Scale(f13,
from_=1,
to=20,
resolution=1,
orient=HORIZONTAL,
length=90)
self.dots_distance_scale.set(6)
self.dots_distance_scale.grid(row=0, column=1, rowspan=2)
f14 = ttk.Labelframe(frame_other, text="Tracks")
f14.grid(row=0, column=3, pady=5, padx=5)
Label(f14, text="N").grid(row=1, column=0)
self.num_frames_tracks_spinbox = Spinbox(f14,
from_=2,
to=num_frames,
width=10)
self.num_frames_tracks_spinbox.delete(0, END)
self.num_frames_tracks_spinbox.insert(END, num_frames)
self.num_frames_tracks_spinbox.grid(row=0, column=1, rowspan=2)
Label(f14, text=u"\N{GREEK SMALL LETTER TAU}").grid(row=3, column=0)
self.gaps_scale = Scale(f14,
from_=1,
to=10,
resolution=1,
orient=HORIZONTAL,
length=90)
self.gaps_scale.set(2)
self.gaps_scale.grid(row=2, column=1, rowspan=2)
self.notebook.pack(padx=1, pady=1)
save_button = Button(self,
text=" Save and Close window ",
command=self.withdraw)
save_button.pack(pady=2)
from Tkinter import Tk, Spinbox
from ttk import Style, Label, Button, Combobox
top = Tk()
Style().configure("TButton", foreground = 'white', background = 'red')
Label(top, text = 'Animals(in pairs; min: pair, ' 'max: dozen)').pack()
Label(top, text='Number:').pack()
Spinbox(top, from_= 2, to = 12, increment=2, font = 'Helvetica -14 bold').pack()
Label(top, text = 'Type:').pack()
Combobox(top, values=('dog', 'cat', 'hamster', 'python', 'Java')).pack()
Button(top, text='QUIT', command=top.quit, style="TButton").pack()
top.mainloop()
def initUI(self):
self.parent.title("FIND SPE VALUE")
self.pack(fill=BOTH, expand=True)
self.columnconfigure(0, weight=1)
#self.rowconfigure(0, weight=1)
# weight attibute is used to make them growable
self.graph_cb = BooleanVar()
self.bins = IntVar()
self.path = StringVar()
self.n_files = IntVar()
self.start_s = IntVar()
self.end_s = IntVar()
self.guess = IntVar()
search = Image.open("next_logo.jpg")
search_temp = search.resize((160, 200), Image.ANTIALIAS)
search_aux = ImageTk.PhotoImage(search_temp)
label1 = Label(self, image=search_aux)
label1.image = search_aux
label1.grid(row=0,
column=0,
columnspan=10,
rowspan=10,
sticky=E + W + S + N)
#Number of Files and Bins. Spin Box
self.n_files.set("2000")
sb1 = Spinbox(self,
from_=1,
to=10000,
width=6,
textvariable=self.n_files)
sb1.grid(row=1, column=4, sticky=W)
sb1_label = Label(self, text="Files")
sb1_label.grid(row=1, column=3, padx=5, sticky=E)
self.bins.set("50")
sb2 = Spinbox(self, from_=10, to=200, width=6, textvariable=self.bins)
sb2.grid(row=1, column=6, sticky=W)
sb2_label = Label(self, text="Hist. Bins")
sb2_label.grid(row=1, column=5, padx=5, sticky=E)
# INTEGRATION LIMITS
Integration_label = Label(self,
text="INTEGRATION",
font="Verdana 12 bold")
Integration_label.grid(row=3, column=4, padx=5, columnspan=2)
self.start_s.set("1732")
sb3 = Spinbox(self,
from_=1,
to=10000,
width=6,
textvariable=self.start_s)
sb3.grid(row=4, column=4, sticky=W)
sb3_label = Label(self, text="StartPoint")
sb3_label.grid(row=4, column=3, padx=5, sticky=E)
self.end_s.set("1752")
sb4 = Spinbox(self,
from_=1,
to=10000,
width=6,
textvariable=self.end_s)
sb4.grid(row=4, column=6, sticky=W)
sb4_label = Label(self, text="EndPoint")
sb4_label.grid(row=4, column=5, padx=5, sticky=E)
sb4_label = Label(self, text="")
sb4_label.grid(row=4, column=7, padx=5, sticky=E)
# FITTING PARAMETERS
Integration_label = Label(self, text="FITTING", font="Verdana 12 bold")
Integration_label.grid(row=6, column=4, padx=5, columnspan=2)
self.guess.set("-20")
sb5 = Spinbox(self, from_=-50, to=-1, width=6, textvariable=self.guess)
sb5.grid(row=7, column=4, sticky=W)
sb5_label = Label(self, text="SPE guess")
sb5_label.grid(row=7, column=5, padx=5, sticky=W)
#Check buttons
cb1 = Checkbutton(self,
text="MultiGraph Output",
variable=self.graph_cb)
cb1.select()
cb1.grid(row=7, column=6, sticky=W)
#Text Box
#self.path.set("F:/DATOS_DAC/spe_1230/2046/pmt_0_trace_evt_")
self.path.set("spe_1230_2046.h5.z")
e1 = Entry(self, textvariable=self.path, width=45)
e1.grid(row=10, column=3, sticky=W, columnspan=10, padx=10, pady=5)
e1_label = Label(self, text="DataSet path (including name file)")
e1_label.grid(row=9, column=3, sticky=W, columnspan=10, padx=10)
# Main buttons
obtn = Button(self, text="GO!!", command=self.SPE_f)
obtn.grid(row=14, column=5, sticky=E, pady=5)
cbtn = Button(self, text="Quit", command=self.quit)
cbtn.grid(row=14, column=6, sticky=E, pady=5)
hbtn = Button(self, text="Help")
hbtn.grid(row=14, column=0, sticky=W, pady=5)
