import board
import busio
import adafruit_bme280
i2c = busio.I2C(board.SCL, board.SDA)
bme280 = adafruit_bme280.Adafruit_BME280_I2C(i2c,address=0x76) # address can be known from sudo i2cdetect -y 1
print("\nTemperature: %0.1f C" % bme280.temperature)
print("Humidity: %0.1f %%" % bme280.humidity)
print("Pressure: %0.1f hPa" % bme280.pressure)
bme280.sea_level_pressure = 1013.25
print("Altitude = %0.2f meters" % bme280.altitude)
wind_event_time = 0 last_time = 0 humidity = 0 ambient_temp = 23.4 pressure = 1067 ground_temp = 16.3 update_flag = 2 # Set-up Raspberry-Pi ports gpio.setmode(gpio.BCM) gpio.setup(RAIN_GPIO, gpio.IN, pull_up_down=gpio.PUD_UP) gpio.setup(WIND_SPEED_GPIO, gpio.IN, pull_up_down=gpio.PUD_UP) # Create library object using our Bus I2C port i2c = busio.I2C(board.SCL, board.SDA) bme280 = adafruit_bme280.Adafruit_BME280_I2C(i2c) # change this to match the location's pressure (hPa) at sea level bme280.sea_level_pressure = 1013.25 # create a string to hold the first part of the URL WUurl = "https://weatherstation.wunderground.com/weatherstation/updateweatherstation.php?" WU_station_id = "" # Replace XXXX with your PWS ID WU_station_pwd = "" # Replace YYYY with your Password WUcreds = "ID=" + WU_station_id + "&PASSWORD="******"&action=updateraw" # define a threaded callback function # this will run in another thread when a rain event is triggered def rain_callback(channel):
def __init__(self):
self.i2c = busio.I2C(board.SCL, board.SDA)
self. bme280 = adafruit_bme280.Adafruit_BME280_I2C(
self.i2c, address=0x76)
from influxdb import InfluxDBClient
from mlx90614 import MLX90614
# Default device I2C address for IR
IR_thermometer_address = 0x5a
thermometer = MLX90614(IR_thermometer_address)
#read and define IR measurements
tempObj = thermometer.get_obj_temp()
tempIRAmb = thermometer.get_amb_temp()
# Create library object using our Bus I2C port
i2c = busio.I2C(board.SCL, board.SDA)
#bme280 = adafruit_bme280.Adafruit_BME280_I2C(i2c)
#or with other sensor address
bme280amb = adafruit_bme280.Adafruit_BME280_I2C(i2c, address=0x76)
bme280enc = adafruit_bme280.Adafruit_BME280_I2C(i2c, address=0x77)
# change this to match the location's pressure (hPa) at sea level
bme280amb.sea_level_pressure = 1013.25
#line to adjust the measurements by adding or subtracting last value
pressureCorrAmb = (bme280amb.pressure + 0)
humidityCorrAmb = (bme280amb.humidity + 0)
tempertureCorrAmb = (bme280amb.temperature - 0)
#dewpoint calculation
b = 17.62
c = 243.12
gamma = (b * tempertureCorrAmb /
(c + tempertureCorrAmb)) + math.log(humidityCorrAmb / 100.0)
from adafruit_bitmap_font import bitmap_font
from adafruit_display_text import label
import adafruit_bme280
import adafruit_ds3231
import eclockhw
import eclocknet
import eclockui
ALTITUDE_ADJUSTMENT = 10.5
tpl5111 = eclockhw.PowerSwitch(board.D5)
i2c = busio.I2C(board.SCL, board.SDA)
rtc = adafruit_ds3231.DS3231(i2c)
bme280 = adafruit_bme280.Adafruit_BME280_I2C(i2c, address=0x76)
battery = eclockhw.Battery(board.VOLTAGE_MONITOR)
display = eclockui.Display()
net = eclocknet.NetCache(cs=DigitalInOut(board.D13),
ready=DigitalInOut(board.D11),
reset=DigitalInOut(board.D12))
font = terminalio.FONT #bitmap_font.load_font("/cantarell-18.bdf")
if net.seconds_since_last_refresh(rtc) > 3600:
net.refresh(rtc)
temperature = rtc.temperature
voltage = battery.voltage()
clk = rtc.datetime
if clk.tm_hour < 12:
import time
from datetime import datetime
import board
import adafruit_bme280
from google.oauth2.service_account import Credentials
from googleapiclient.discovery import build
#--| User Config |-----------------------------------------------
SERVICE_ACCOUNT_FILE = 'YOUR_CREDENTIALS_FILE.json'
SPREADSHEET_ID = 'YOUR_SHEET_ID'
DATA_LOCATION = 'A1'
UPDATE_RATE = 60
#--| User Config |-----------------------------------------------
# Sensor setup
bme = adafruit_bme280.Adafruit_BME280_I2C(board.I2C())
# Google Sheets API setup
SCOPES = [
'https://spreadsheets.google.com/feeds',
'https://www.googleapis.com/auth/drive'
]
CREDS = Credentials.from_service_account_file(SERVICE_ACCOUNT_FILE,
scopes=SCOPES)
SHEET = build('sheets', 'v4', credentials=CREDS).spreadsheets()
# Logging loop
print("Logging...")
while True:
values = [[
datetime.now().isoformat(), bme.pressure, bme.temperature, bme.humidity