def test_current_printer_returns_printer_name(self, mock_new, mock_save):
capi = ConfigurationAPI(ConfigurationManager())
mock_new.return_value = { 'name' : 'Spam' }
capi.add_printer('Spam')
actual = capi.current_printer()
self.assertEqual('Spam', actual)
def test_current_printer_returns_printer_name(self, mock_new, mock_save):
capi = ConfigurationAPI(ConfigurationManager())
name = "Spam"
config = self.default_config
config.name = name
mock_new.return_value = config
capi.add_printer('Spam')
actual = capi.current_printer()
self.assertEqual('Spam', actual)
def test_current_printer_returns_none_when_no_printer_loaded(self):
capi = ConfigurationAPI(ConfigurationManager())
actual = capi.current_printer()
self.assertEqual(None, actual)
def test_current_printer_returns_none_when_no_printer_loaded(self):
capi = ConfigurationAPI(ConfigurationManager())
actual = capi.current_printer()
self.assertEqual(None, actual)
class SetupAudioUI(PeachyFrame):
def initialize(self):
self.grid()
self._current_printer = self.kwargs['printer']
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._configuration_api.load_printer(self._current_printer)
audio_options = self._configuration_api.get_available_audio_options()
self._input_options = dict([ (str(option), option) for option in audio_options['inputs']])
self._output_options = dict([ (str(option), option) for option in audio_options['outputs']])
if (len(self._input_options) < 1 or len(self._output_options) < 1):
logging.error("No inputs available")
tkMessageBox.showwarning('Error','Audio card appears to not be setup correctly, Have you plugged in your dripper and printer?')
self._back()
return
self._input_audio_selection_current = StringVar()
self._input_audio_selection_current.set(self._currently_selected(self._input_options))
self._output_options = dict([ (str(option), option) for option in audio_options['outputs']])
self._output_audio_selection_current = StringVar()
self._output_audio_selection_current.set(self._currently_selected(self._output_options))
Label(self, text = 'Printer: ').grid(column=0,row=10)
Label(self, text = self._configuration_api.current_printer()).grid(column=1,row=10)
Button(self, text='?', command=self._help).grid(column=2, row=10,stick=N+E)
Label(self).grid(column=0,row=20)
Label(self, text = 'Selecting a format not supported by your system may result in odd behaviour').grid(column=0,row=25,columnspan=3)
Label(self).grid(column=0,row=26)
Label(self, text = "Audio Input Settings" ).grid(column=0,row=30)
OptionMenu( self, self._input_audio_selection_current, *self._input_options.keys()).grid(column=1,row=30,sticky=NSEW)
Label(self, text = "Audio Output Settings" ).grid(column=0,row=40)
OptionMenu(self, self._output_audio_selection_current, *self._output_options.keys()).grid(column=1,row=40,sticky=NSEW)
Label(self).grid(column=0,row=50)
Button(self, text ="Back", command = self._back).grid(column=0,row=60,sticky=N+S+W)
Button(self, text ="Save", command = self._save).grid(column=1,row=60,sticky=N+S+E)
self.update()
def _currently_selected(self, audio_options):
current_option = [ k for k, v in audio_options.iteritems() if v.current ]
if (len(current_option) == 0):
return audio_options[0]
else:
return current_option[0]
def _get_recommend_audio_index(self, options):
for i in range(0,len(options)):
if options[i].endswith('(Recommended)'):
return i
return 0
def _back(self):
self.navigate(SetupUI)
def _help(self):
PopUp(self,'Help', help_text.setup_audio_help)
def _save(self):
input_option = self._input_options[self._input_audio_selection_current.get()]
output_option = self._output_options[self._output_audio_selection_current.get()]
self._configuration_api.set_audio_input_options(input_option)
self._configuration_api.set_audio_output_options(output_option)
self.navigate(SetupUI)
def close(self):
pass
class CureTestUI(PeachyFrame):
def initialize(self):
self.grid()
self._current_printer = self.kwargs['printer']
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._configuration_api.load_printer(self._current_printer)
self._base_height = IntVar()
self._base_height.set(3)
self._total_height = IntVar()
self._total_height.set(23)
self._start_speed = IntVar()
self._start_speed.set(50)
self._stop_speed = IntVar()
self._stop_speed.set(250)
self._best_height = IntVar()
self._best_height.set(0)
Label(self, text = 'Printer: ').grid(column=0,row=10)
Label(self, text = self._configuration_api.current_printer()).grid(column=1,row=10)
Button(self, text='?', command=self._help).grid(column=2, row=10,stick=N+E)
Label(self).grid(column=1,row=15)
Label(self, text = "Base Height (mm)" ).grid(column=0,row=20)
Entry(self, textvariable = self._base_height).grid(column=1, row=20)
Label(self, text = "Total Height (mm)" ).grid(column=0,row=30)
Entry(self, textvariable = self._total_height).grid(column=1, row=30)
Label(self, text = "Start Speed (mm)" ).grid(column=0,row=40)
Entry(self, textvariable = self._start_speed).grid(column=1, row=40)
Label(self, text = "Finish Speed (mm)" ).grid(column=0,row=50)
Entry(self, textvariable = self._stop_speed).grid(column=1, row=50)
Label(self).grid(column=1,row=60)
Button(self, text ="Run Test", command = self._start).grid(column=2,row=70,sticky=N+S+E)
Label(self).grid(column=1,row=80)
Label(self, text = "Best height above base (mm)" ).grid(column=0,row=90)
self._best_height_field = Entry(self, textvariable = self._best_height)
self._best_height_field.grid(column=1, row=90)
Label(self).grid(column=1,row=100)
Button(self, text ="Save", command = self._save).grid(column=2,row=110,sticky=N+S+W)
Button(self, text ="Back", command = self._back).grid(column=0,row=110,sticky=N+S+W)
self.update()
def _back(self):
self.navigate(SetupUI)
def _help(self):
PopUp(self,'Help', help_text.cure_test_help)
def _save(self):
try:
speed = self._configuration_api.get_speed_at_height(
self._base_height.get(),
self._total_height.get(),
self._start_speed.get(),
self._stop_speed.get(),
self._best_height.get()
)
self._configuration_api.set_speed(speed)
self.navigate(SetupUI)
except Exception as ex:
tkMessageBox.showwarning("Error", ex.message)
def _start(self):
try:
cure_test = self._configuration_api.get_cure_test(
self._base_height.get(),
self._total_height.get(),
self._start_speed.get(),
self._stop_speed.get()
)
self.navigate(PrintStatusUI,layer_generator = cure_test, config = self._configuration_api.get_current_config(), calling_class = CureTestUI, printer = self._current_printer)
except Exception as ex:
tkMessageBox.showwarning("Error", ex.message)
def close(self):
pass
class SetupOptionsUI(PeachyFrame):
def initialize(self):
self.grid()
self._current_printer = self.kwargs['printer']
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._configuration_api.load_printer(self._current_printer)
self.option_add('*Dialog.msg.width', 50)
self.laser_thickness_entry_text = DoubleVar()
self.laser_thickness_entry_text.set(self._configuration_api.get_laser_thickness_mm())
self.sublayer_height_entry_text = DoubleVar()
self.sublayer_height_entry_text.set(self._configuration_api.get_sublayer_height_mm())
self.max_lead_distance_entry_text = DoubleVar()
self.max_lead_distance_entry_text.set(self._configuration_api.get_max_lead_distance_mm())
Label(self, text = 'Printer: ').grid(column=0,row=10)
Label(self, text = self._configuration_api.current_printer()).grid(column=1,row=10)
Button(self, text='?', command=self._help).grid(column=2, row=10,stick=N+E)
Label(self).grid(column=1,row=15)
Label(self, text = "Spot Diameter (mm) [0.5]" ).grid(column=0,row=20)
Entry(self, textvariable = self.laser_thickness_entry_text).grid(column=1, row=20)
Label(self, text = "Sub Layer Height (mm) [0.05]" ).grid(column=0,row=30)
Entry(self, textvariable = self.sublayer_height_entry_text).grid(column=1, row=30)
Label(self, text = "Maximum Lead Distance (mm) [0.5]" ).grid(column=0,row=40)
Entry(self, textvariable = self.max_lead_distance_entry_text).grid(column=1, row=40)
Label(self).grid(column=1,row=50)
advanced_frame = LabelFrame(self, text="Advanced Options (use at your own risk)", padx=5, pady=5)
advanced_frame.grid(column=0,row=60, columnspan=3)
# ----------------------Frame Start---------------------------
self._use_serial = IntVar()
self._use_serial.set(self._configuration_api.get_serial_enabled())
self._serial_on_command = StringVar()
self._serial_on_command.set(self._configuration_api.get_serial_on_command())
self._serial_off_command = StringVar()
self._serial_off_command.set(self._configuration_api.get_serial_off_command())
self._serial_port = StringVar()
self._serial_port.set(self._configuration_api.get_serial_port())
Checkbutton(advanced_frame, text="Use Serial Drip Control", variable = self._use_serial, command=self._showhide_serial).grid(column=0, row = 10)
Label(advanced_frame,text="Serial Port").grid(column=0, row=20)
self._serial_port_entry = Entry(advanced_frame,textvariable=self._serial_port)
self._serial_port_entry.grid(column=1, row=20)
Label(advanced_frame,text="Serial On Command").grid(column=0, row=30)
self._serial_on_entry = Entry(advanced_frame,textvariable=self._serial_on_command)
self._serial_on_entry.grid(column=1, row=30)
Label(advanced_frame,text="Serial Off Command").grid(column=0, row=40)
self._serial_off_entry = Entry(advanced_frame,textvariable=self._serial_off_command)
self._serial_off_entry.grid(column=1, row=40)
self._showhide_serial()
# ----------------------Frame End---------------------------
Label(self).grid(column=1,row=70)
Button(self, text ="Back", command = self._back).grid(column=0,row=80,sticky=N+S+W)
Button(self, text ="Save", command = self._save).grid(column=2,row=80,sticky=N+S+E)
self.update()
def _showhide_serial(self):
if self._use_serial.get():
self._serial_off_entry.configure(state='normal')
self._serial_on_entry.configure(state='normal')
self._serial_port_entry.configure(state='normal')
else:
self._serial_off_entry.configure(state='disabled')
self._serial_on_entry.configure(state='disabled')
self._serial_port_entry.configure(state='disabled')
def _help(self):
PopUp(self,'Help', help_text.options_help)
def _back(self):
self.navigate(SetupUI)
def _save(self):
self._configuration_api.set_laser_thickness_mm(float(self.laser_thickness_entry_text.get()))
self._configuration_api.set_sublayer_height_mm(float(self.sublayer_height_entry_text.get()))
self._configuration_api.set_max_lead_distance_mm(float(self.max_lead_distance_entry_text.get()))
self._configuration_api.set_serial_enabled(bool(self._use_serial.get()))
self._configuration_api.set_serial_port(self._serial_port.get())
self._configuration_api.set_serial_on_command(self._serial_on_command.get())
self._configuration_api.set_serial_off_command(self._serial_off_command.get())
self.navigate(SetupUI)
def close(self):
pass
class DripCalibrationUI(PeachyFrame, FieldValidations):
def initialize(self):
self._current_printer = self.kwargs['printer']
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._configuration_api.load_printer(self._current_printer)
self.grid()
self._dripper_type = StringVar()
self._dripper_type.set(self._configuration_api.get_dripper_type())
Label(self, text = 'Printer: ').grid(column=0,row=10)
Label(self, text = self._configuration_api.current_printer()).grid(column=1,row=10)
Button(self, text='?', command=self._help).grid(column=2, row=10,stick=N+E)
Label(self).grid(column=1,row=15)
Radiobutton(self, text="Microphone Dripper", variable=self._dripper_type, value="audio", command = self._dripper_type_changed).grid(column=0,row=20,sticky=N+S+E+W)
Radiobutton(self, text="Emulated Dripper ", variable=self._dripper_type, value="emulated", command = self._dripper_type_changed).grid(column=1,row=20,sticky=N+S+E+W)
# ---------------- Microphone Dripper Frame Start -------------------------
self.update_drips_job = None
self.drips = 0
self._drip_count = IntVar()
self.drips_per_mm_field_text = DoubleVar()
self.drips_per_mm_field_text.set(self._configuration_api.get_drips_per_mm())
self._height_mm_entry = IntVar()
self._height_mm_entry.set(10)
self._average_drips = StringVar()
self._average_drips.set(0)
self.real_dripper_frame = LabelFrame(self, text="Microphone Dripper Setup", padx=5, pady=5)
self.real_dripper_frame.grid(column=0,row=30, columnspan=3)
Label(self.real_dripper_frame,text='Drips', anchor="w").grid(column=0,row=20,sticky=N+S+E+W)
Label(self.real_dripper_frame,textvariable=self._drip_count, anchor="w").grid(column=1,row=20,sticky=N+S+E+W)
Label(self.real_dripper_frame,text='Drips/Second (last 10 drips)', anchor="w").grid(column=0,row=25,sticky=N+S+E+W)
Label(self.real_dripper_frame,textvariable=self._average_drips, anchor="w").grid(column=1,row=25,sticky=N+S+E+W)
Button(self.real_dripper_frame,text=u"Reset Counter", command=self._reset).grid(column=2,row=20,sticky=N+S+E+W)
Label(self.real_dripper_frame,text="End Height in Millimeters", anchor="w",justify="right").grid(column=0,row=30,sticky=N+S+E+W)
Entry(self.real_dripper_frame, width=5, justify="left", textvariable=self._height_mm_entry, validate = 'key', validatecommand=self.validate_int_command()).grid(column=1,row=30,sticky=N+S+E+W)
Label(self.real_dripper_frame,text="Drips per mm", anchor="w", justify="right").grid(column=0,row=40,sticky=N+S+E+W)
Label(self.real_dripper_frame,textvariable=self.drips_per_mm_field_text, anchor="w").grid(column=1,row=40,sticky=N+S+E+W)
Button(self.real_dripper_frame,text=u"Mark", command=self._mark).grid(column=2,row=40,sticky=N+S+E+W)
Label(self.real_dripper_frame).grid(column=1,row=45)
self.real_dripper_frame.grid_remove()
# ---------------- Microphone Dripper Frame Stop -------------------------
# ---------------- Manual Dripper Frame Start ----------------------------
self._drips_per_second = DoubleVar()
self._drips_per_second.set(self._configuration_api.get_emulated_drips_per_second())
self.fake_dripper_frame = LabelFrame(self, text="Emulated Dripper Setup", padx=5, pady=5)
self.fake_dripper_frame.grid(column=0,row=40, columnspan=3,sticky=N+S+E+W)
self.fake_dripper_frame.grid_remove()
Label(self.fake_dripper_frame, text="Drips per second").grid(column=1,row=10)
Entry(self.fake_dripper_frame, textvariable=self._drips_per_second).grid(column=2,row=10)
# ---------------- Manual Dripper Frame Stop ----------------------------
Button(self,text=u"Save", command=self._save).grid(column=2,row=50,sticky=NSEW)
Button(self,text=u"Back", command=self._back).grid(column=0,row=50,sticky=N+S+E+W)
## destory Automaticness
self._dripper_type_changed()
self.update()
def _dripper_type_changed(self):
if self._dripper_type.get() == 'audio':
self._configuration_api.set_dripper_type('audio')
self.fake_dripper_frame.grid_remove()
self.real_dripper_frame.grid()
self._configuration_api.start_counting_drips(drip_call_back = self._drips_updated)
elif self._dripper_type.get() == 'emulated':
self._configuration_api.set_dripper_type('emulated')
self._configuration_api.stop_counting_drips()
self.real_dripper_frame.grid_remove()
self.fake_dripper_frame.grid()
else:
raise Exception('Unsupported Dripper: %s ' % self._dripper_type.get() )
def _drips_updated(self, drips, height, drips_per_second):
self._drip_count.set(drips)
self._average_drips.set("%0.2f" % drips_per_second)
def _reset(self):
self._configuration_api.reset_drips()
def _back(self):
self.navigate(SetupUI)
def _help(self):
PopUp(self,'Help', help_text.setup_drip_calibration_help)
def _mark(self):
try:
self._configuration_api.set_target_height(self._height_mm_entry.get())
self._configuration_api.mark_drips_at_target()
self.drips_per_mm_field_text.set(self._configuration_api.get_drips_per_mm())
except Exception as ex:
tkMessageBox.showwarning(
"Error",
ex.message
)
def _save(self):
self._configuration_api.set_emulated_drips_per_second(self._drips_per_second.get())
self._configuration_api.stop_counting_drips()
self._configuration_api.save()
self.navigate(SetupUI)
def close(self):
self._configuration_api.stop_counting_drips()
class CureTestUI(PeachyFrame):
def initialize(self):
self.grid()
self._current_printer = self.kwargs['printer']
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._configuration_api.load_printer(self._current_printer)
self._base_height = IntVar()
self._base_height.set(3)
self._total_height = IntVar()
self._total_height.set(23)
self._start_speed = IntVar()
self._start_speed.set(50)
self._stop_speed = IntVar()
self._stop_speed.set(250)
self._best_height = IntVar()
self._best_height.set(0)
Label(self, text='Printer: ').grid(column=0, row=10)
Label(self,
text=self._configuration_api.current_printer()).grid(column=1,
row=10)
Button(self, text='?', command=self._help).grid(column=2,
row=10,
stick=N + E)
Label(self).grid(column=1, row=15)
Label(self, text="Base Height (mm)").grid(column=0, row=20)
Entry(self, textvariable=self._base_height).grid(column=1, row=20)
Label(self, text="Total Height (mm)").grid(column=0, row=30)
Entry(self, textvariable=self._total_height).grid(column=1, row=30)
Label(self, text="Start Speed (mm)").grid(column=0, row=40)
Entry(self, textvariable=self._start_speed).grid(column=1, row=40)
Label(self, text="Finish Speed (mm)").grid(column=0, row=50)
Entry(self, textvariable=self._stop_speed).grid(column=1, row=50)
Label(self).grid(column=1, row=60)
Button(self, text="Run Test",
command=self._start).grid(column=2, row=70, sticky=N + S + E)
Label(self).grid(column=1, row=80)
Label(self, text="Best height above base (mm)").grid(column=0, row=90)
self._best_height_field = Entry(self, textvariable=self._best_height)
self._best_height_field.grid(column=1, row=90)
Label(self).grid(column=1, row=100)
Button(self, text="Save", command=self._save).grid(column=2,
row=110,
sticky=N + S + W)
Button(self, text="Back", command=self._back).grid(column=0,
row=110,
sticky=N + S + W)
self.update()
def _back(self):
self.navigate(SetupUI)
def _help(self):
PopUp(self, 'Help', help_text.cure_test_help)
def _save(self):
try:
speed = self._configuration_api.get_speed_at_height(
self._base_height.get(), self._total_height.get(),
self._start_speed.get(), self._stop_speed.get(),
self._best_height.get())
self._configuration_api.set_speed(speed)
self.navigate(SetupUI)
except Exception as ex:
tkMessageBox.showwarning("Error", ex.message)
def _start(self):
try:
cure_test = self._configuration_api.get_cure_test(
self._base_height.get(), self._total_height.get(),
self._start_speed.get(), self._stop_speed.get())
self.navigate(PrintStatusUI,
layer_generator=cure_test,
config=self._configuration_api.get_current_config(),
calling_class=CureTestUI,
printer=self._current_printer)
except Exception as ex:
tkMessageBox.showwarning("Error", ex.message)
def close(self):
pass
class SetupAudioUI(PeachyFrame):
def initialize(self):
self.grid()
self._current_printer = self.kwargs['printer']
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._configuration_api.load_printer(self._current_printer)
audio_options = self._configuration_api.get_available_audio_options()
self._input_options = dict([(str(option), option)
for option in audio_options['inputs']])
self._output_options = dict([(str(option), option)
for option in audio_options['outputs']])
if (len(self._input_options) < 1 or len(self._output_options) < 1):
logging.error("No inputs available")
tkMessageBox.showwarning(
'Error',
'Audio card appears to not be setup correctly, Have you plugged in your dripper and printer?'
)
self._back()
return
self._input_audio_selection_current = StringVar()
self._input_audio_selection_current.set(
self._currently_selected(self._input_options))
self._output_options = dict([(str(option), option)
for option in audio_options['outputs']])
self._output_audio_selection_current = StringVar()
self._output_audio_selection_current.set(
self._currently_selected(self._output_options))
Label(self, text='Printer: ').grid(column=0, row=10)
Label(self,
text=self._configuration_api.current_printer()).grid(column=1,
row=10)
Button(self, text='?', command=self._help).grid(column=2,
row=10,
stick=N + E)
Label(self).grid(column=0, row=20)
Label(
self,
text=
'Selecting a format not supported by your system may result in odd behaviour'
).grid(column=0, row=25, columnspan=3)
Label(self).grid(column=0, row=26)
Label(self, text="Audio Input Settings").grid(column=0, row=30)
OptionMenu(self, self._input_audio_selection_current,
*self._input_options.keys()).grid(column=1,
row=30,
sticky=NSEW)
Label(self, text="Audio Output Settings").grid(column=0, row=40)
OptionMenu(self, self._output_audio_selection_current,
*self._output_options.keys()).grid(column=1,
row=40,
sticky=NSEW)
Label(self).grid(column=0, row=50)
Button(self, text="Back", command=self._back).grid(column=0,
row=60,
sticky=N + S + W)
Button(self, text="Save", command=self._save).grid(column=1,
row=60,
sticky=N + S + E)
self.update()
def _currently_selected(self, audio_options):
current_option = [k for k, v in audio_options.iteritems() if v.current]
if (len(current_option) == 0):
return audio_options[0]
else:
return current_option[0]
def _get_recommend_audio_index(self, options):
for i in range(0, len(options)):
if options[i].endswith('(Recommended)'):
return i
return 0
def _back(self):
self.navigate(SetupUI)
def _help(self):
PopUp(self, 'Help', help_text.setup_audio_help)
def _save(self):
input_option = self._input_options[
self._input_audio_selection_current.get()]
output_option = self._output_options[
self._output_audio_selection_current.get()]
self._configuration_api.set_audio_input_options(input_option)
self._configuration_api.set_audio_output_options(output_option)
self.navigate(SetupUI)
def close(self):
pass
class DripCalibrationUI(PeachyFrame, FieldValidations):
def initialize(self):
self._current_printer = self.kwargs['printer']
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._configuration_api.load_printer(self._current_printer)
self.grid()
self._dripper_type = StringVar()
self._dripper_type.set(self._configuration_api.get_dripper_type())
Label(self, text='Printer: ').grid(column=0, row=10)
Label(self,
text=self._configuration_api.current_printer()).grid(column=1,
row=10)
Button(self, text='?', command=self._help).grid(column=2,
row=10,
stick=N + E)
Label(self).grid(column=1, row=15)
Radiobutton(self,
text="Microphone Dripper",
variable=self._dripper_type,
value="audio",
command=self._dripper_type_changed).grid(column=0,
row=20,
sticky=N + S + E +
W)
Radiobutton(self,
text="Emulated Dripper ",
variable=self._dripper_type,
value="emulated",
command=self._dripper_type_changed).grid(column=1,
row=20,
sticky=N + S + E +
W)
# ---------------- Microphone Dripper Frame Start -------------------------
self.update_drips_job = None
self.drips = 0
self._drip_count = IntVar()
self.drips_per_mm_field_text = DoubleVar()
self.drips_per_mm_field_text.set(
self._configuration_api.get_drips_per_mm())
self._height_mm_entry = IntVar()
self._height_mm_entry.set(10)
self._average_drips = StringVar()
self._average_drips.set(0)
self.real_dripper_frame = LabelFrame(self,
text="Microphone Dripper Setup",
padx=5,
pady=5)
self.real_dripper_frame.grid(column=0, row=30, columnspan=3)
Label(self.real_dripper_frame, text='Drips',
anchor="w").grid(column=0, row=20, sticky=N + S + E + W)
Label(self.real_dripper_frame,
textvariable=self._drip_count,
anchor="w").grid(column=1, row=20, sticky=N + S + E + W)
Label(self.real_dripper_frame,
text='Drips/Second (last 10 drips)',
anchor="w").grid(column=0, row=25, sticky=N + S + E + W)
Label(self.real_dripper_frame,
textvariable=self._average_drips,
anchor="w").grid(column=1, row=25, sticky=N + S + E + W)
Button(self.real_dripper_frame,
text=u"Reset Counter",
command=self._reset).grid(column=2,
row=20,
sticky=N + S + E + W)
Label(self.real_dripper_frame,
text="End Height in Millimeters",
anchor="w",
justify="right").grid(column=0, row=30, sticky=N + S + E + W)
Entry(self.real_dripper_frame,
width=5,
justify="left",
textvariable=self._height_mm_entry,
validate='key',
validatecommand=self.validate_int_command()).grid(column=1,
row=30,
sticky=N + S +
E + W)
Label(self.real_dripper_frame,
text="Drips per mm",
anchor="w",
justify="right").grid(column=0, row=40, sticky=N + S + E + W)
Label(self.real_dripper_frame,
textvariable=self.drips_per_mm_field_text,
anchor="w").grid(column=1, row=40, sticky=N + S + E + W)
Button(self.real_dripper_frame, text=u"Mark",
command=self._mark).grid(column=2, row=40, sticky=N + S + E + W)
Label(self.real_dripper_frame).grid(column=1, row=45)
self.real_dripper_frame.grid_remove()
# ---------------- Microphone Dripper Frame Stop -------------------------
# ---------------- Manual Dripper Frame Start ----------------------------
self._drips_per_second = DoubleVar()
self._drips_per_second.set(
self._configuration_api.get_emulated_drips_per_second())
self.fake_dripper_frame = LabelFrame(self,
text="Emulated Dripper Setup",
padx=5,
pady=5)
self.fake_dripper_frame.grid(column=0,
row=40,
columnspan=3,
sticky=N + S + E + W)
self.fake_dripper_frame.grid_remove()
Label(self.fake_dripper_frame, text="Drips per second").grid(column=1,
row=10)
Entry(self.fake_dripper_frame,
textvariable=self._drips_per_second).grid(column=2, row=10)
# ---------------- Manual Dripper Frame Stop ----------------------------
Button(self, text=u"Save", command=self._save).grid(column=2,
row=50,
sticky=NSEW)
Button(self, text=u"Back",
command=self._back).grid(column=0, row=50, sticky=N + S + E + W)
## destory Automaticness
self._dripper_type_changed()
self.update()
def _dripper_type_changed(self):
if self._dripper_type.get() == 'audio':
self._configuration_api.set_dripper_type('audio')
self.fake_dripper_frame.grid_remove()
self.real_dripper_frame.grid()
self._configuration_api.start_counting_drips(
drip_call_back=self._drips_updated)
elif self._dripper_type.get() == 'emulated':
self._configuration_api.set_dripper_type('emulated')
self._configuration_api.stop_counting_drips()
self.real_dripper_frame.grid_remove()
self.fake_dripper_frame.grid()
else:
raise Exception('Unsupported Dripper: %s ' %
self._dripper_type.get())
def _drips_updated(self, drips, height, drips_per_second):
self._drip_count.set(drips)
self._average_drips.set("%0.2f" % drips_per_second)
def _reset(self):
self._configuration_api.reset_drips()
def _back(self):
self.navigate(SetupUI)
def _help(self):
PopUp(self, 'Help', help_text.setup_drip_calibration_help)
def _mark(self):
try:
self._configuration_api.set_target_height(
self._height_mm_entry.get())
self._configuration_api.mark_drips_at_target()
self.drips_per_mm_field_text.set(
self._configuration_api.get_drips_per_mm())
except Exception as ex:
tkMessageBox.showwarning("Error", ex.message)
def _save(self):
self._configuration_api.set_emulated_drips_per_second(
self._drips_per_second.get())
self._configuration_api.stop_counting_drips()
self._configuration_api.save()
self.navigate(SetupUI)
def close(self):
self._configuration_api.stop_counting_drips()
class SetupOptionsUI(PeachyFrame):
def initialize(self):
self.grid()
self._current_printer = self.kwargs['printer']
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._configuration_api.load_printer(self._current_printer)
self.option_add('*Dialog.msg.width', 50)
self.laser_thickness_entry_text = DoubleVar()
self.laser_thickness_entry_text.set(
self._configuration_api.get_laser_thickness_mm())
self.sublayer_height_entry_text = DoubleVar()
self.sublayer_height_entry_text.set(
self._configuration_api.get_sublayer_height_mm())
self.max_lead_distance_entry_text = DoubleVar()
self.max_lead_distance_entry_text.set(
self._configuration_api.get_max_lead_distance_mm())
Label(self, text='Printer: ').grid(column=0, row=10)
Label(self,
text=self._configuration_api.current_printer()).grid(column=1,
row=10)
Button(self, text='?', command=self._help).grid(column=2,
row=10,
stick=N + E)
Label(self).grid(column=1, row=15)
Label(self, text="Spot Diameter (mm) [0.5]").grid(column=0, row=20)
Entry(self,
textvariable=self.laser_thickness_entry_text).grid(column=1,
row=20)
Label(self, text="Sub Layer Height (mm) [0.05]").grid(column=0, row=30)
Entry(self,
textvariable=self.sublayer_height_entry_text).grid(column=1,
row=30)
Label(self, text="Maximum Lead Distance (mm) [0.5]").grid(column=0,
row=40)
Entry(self,
textvariable=self.max_lead_distance_entry_text).grid(column=1,
row=40)
Label(self).grid(column=1, row=50)
advanced_frame = LabelFrame(
self,
text="Advanced Options (use at your own risk)",
padx=5,
pady=5)
advanced_frame.grid(column=0, row=60, columnspan=3)
# ----------------------Frame Start---------------------------
self._use_serial = IntVar()
self._use_serial.set(self._configuration_api.get_serial_enabled())
self._serial_on_command = StringVar()
self._serial_on_command.set(
self._configuration_api.get_serial_on_command())
self._serial_off_command = StringVar()
self._serial_off_command.set(
self._configuration_api.get_serial_off_command())
self._serial_port = StringVar()
self._serial_port.set(self._configuration_api.get_serial_port())
Checkbutton(advanced_frame,
text="Use Serial Drip Control",
variable=self._use_serial,
command=self._showhide_serial).grid(column=0, row=10)
Label(advanced_frame, text="Serial Port").grid(column=0, row=20)
self._serial_port_entry = Entry(advanced_frame,
textvariable=self._serial_port)
self._serial_port_entry.grid(column=1, row=20)
Label(advanced_frame, text="Serial On Command").grid(column=0, row=30)
self._serial_on_entry = Entry(advanced_frame,
textvariable=self._serial_on_command)
self._serial_on_entry.grid(column=1, row=30)
Label(advanced_frame, text="Serial Off Command").grid(column=0, row=40)
self._serial_off_entry = Entry(advanced_frame,
textvariable=self._serial_off_command)
self._serial_off_entry.grid(column=1, row=40)
self._showhide_serial()
# ----------------------Frame End---------------------------
Label(self).grid(column=1, row=70)
Button(self, text="Back", command=self._back).grid(column=0,
row=80,
sticky=N + S + W)
Button(self, text="Save", command=self._save).grid(column=2,
row=80,
sticky=N + S + E)
self.update()
def _showhide_serial(self):
if self._use_serial.get():
self._serial_off_entry.configure(state='normal')
self._serial_on_entry.configure(state='normal')
self._serial_port_entry.configure(state='normal')
else:
self._serial_off_entry.configure(state='disabled')
self._serial_on_entry.configure(state='disabled')
self._serial_port_entry.configure(state='disabled')
def _help(self):
PopUp(self, 'Help', help_text.options_help)
def _back(self):
self.navigate(SetupUI)
def _save(self):
self._configuration_api.set_laser_thickness_mm(
float(self.laser_thickness_entry_text.get()))
self._configuration_api.set_sublayer_height_mm(
float(self.sublayer_height_entry_text.get()))
self._configuration_api.set_max_lead_distance_mm(
float(self.max_lead_distance_entry_text.get()))
self._configuration_api.set_serial_enabled(bool(
self._use_serial.get()))
self._configuration_api.set_serial_port(self._serial_port.get())
self._configuration_api.set_serial_on_command(
self._serial_on_command.get())
self._configuration_api.set_serial_off_command(
self._serial_off_command.get())
self.navigate(SetupUI)
def close(self):
pass
class DripCalibrationUI(PeachyFrame, FieldValidations):
def initialize(self):
self._current_printer = self.kwargs['printer']
self._configuration_api = ConfigurationAPI(self._configuration_manager)
self._configuration_api.load_printer(self._current_printer)
self.update_drips_job = None
self.drips = 0
self._drip_count = IntVar()
self.grid()
self.drips_per_mm_field_text = DoubleVar()
self.drips_per_mm_field_text.set(self._configuration_api.get_drips_per_mm())
self._height_mm_entry = IntVar()
self._height_mm_entry.set(10)
Label(self, text = 'Printer: ').grid(column=0,row=10)
Label(self, text = self._configuration_api.current_printer()).grid(column=1,row=10)
Button(self, text='?', command=self._help).grid(column=2, row=10,stick=N+E)
Label(self).grid(column=1,row=15)
Label(self,text='Drips', anchor="w").grid(column=0,row=20,sticky=N+S+E+W)
Label(self,textvariable=self._drip_count, anchor="w").grid(column=1,row=20,sticky=N+S+E+W)
Button(self,text=u"Reset Counter", command=self._reset).grid(column=2,row=20,sticky=N+S+E+W)
Label(self,text="End Height in Millimeters", anchor="w",justify="right").grid(column=0,row=30,sticky=N+S+E+W)
Entry(self, width=5, justify="left", textvariable=self._height_mm_entry, validate = 'key', validatecommand=self.validate_int_command()).grid(column=1,row=30,sticky=N+S+E+W)
Label(self,text="Drips per mm", anchor="w", justify="right").grid(column=0,row=40,sticky=N+S+E+W)
Label(self,textvariable=self.drips_per_mm_field_text, anchor="w").grid(column=1,row=40,sticky=N+S+E+W)
Button(self,text=u"Mark", command=self._mark).grid(column=2,row=40,sticky=N+S+E+W)
Label(self).grid(column=1,row=45)
self._save_button = Button(self,text=u"Save", command=self._save, state=DISABLED)
self._save_button.grid(column=2,row=50,sticky=NSEW)
Button(self,text=u"Back", command=self._back).grid(column=0,row=50,sticky=N+S+E+W)
self._configuration_api.start_counting_drips(drip_call_back = self._drips_updated)
self.update()
def _drips_updated(self, drips, height):
self._drip_count.set(drips)
def _reset(self):
self._configuration_api.reset_drips()
def _back(self):
self.navigate(SetupUI)
def _help(self):
PopUp(self,'Help', help_text.setup_drip_calibration_help)
def _mark(self):
try:
self._configuration_api.set_target_height(self._height_mm_entry.get())
self._configuration_api.mark_drips_at_target()
self.drips_per_mm_field_text.set(self._configuration_api.get_drips_per_mm())
self._save_button.config(state = NORMAL)
except Exception as ex:
tkMessageBox.showwarning(
"Error",
ex.message
)
def _save(self):
self._configuration_api.stop_counting_drips()
self._configuration_api.save()
self.navigate(SetupUI)
def close(self):
self._configuration_api.stop_counting_drips()
