def snmp_pre_config():
"""
SNMP pre config
"""
global ipaddress
ipaddress_list = basic_obj.get_ifconfig_inet(vars.D1, data.mgmt_int)
st.log("Checking Ip address of the Device ")
if not ipaddress_list:
st.report_env_fail("ip_verification_fail")
ipaddress = ipaddress_list[0]
st.log("Device ip addresse - {}".format(ipaddress))
snmp_obj.set_snmp_config(vars.D1,
snmp_rocommunity=data.ro_community,
snmp_location=data.location)
if not st.is_community_build():
ipfeature.configure_loopback(vars.D1,
loopback_name="Loopback0",
config="yes")
ipfeature.config_ip_addr_interface(vars.D1,
data.loopback0,
data.loopback_addr,
32,
family=data.af_ipv4)
if not ipfeature.ping(vars.D1, ipaddress, family='ipv4', external=True):
st.error("Ping reachability is failed between SNMP server and Device.")
if not snmp_obj.poll_for_snmp(vars.D1,
data.wait_time,
1,
ipaddress=ipaddress,
oid=data.oid_sysName,
community_name=data.ro_community):
st.log("Post SNMP config , snmp is not working")
st.report_fail("operation_failed")
def snmp_post_config():
"""
SNMP post config
"""
snmp_obj.restore_snmp_config(vars.D1)
if not st.is_community_build():
ipfeature.configure_loopback(vars.D1,
loopback_name="Loopback0",
config="no")
def dut1_config(config=''):
st.log('On DUT1 physical interface IPv4 and IPv6 addresses on it')
ip_obj.config_ip_addr_interface(data.dut1_client, data.d1_d2_ports[0],
data.dut1_dut2_ipv6[0],
data.dut1_dut2_ipv6_subnet, 'ipv6')
ip_obj.config_ip_addr_interface(data.dut1_client, data.d1_d2_ports[0],
data.dut1_dut2_ip[0],
data.dut1_dut2_ip_subnet, 'ipv4')
st.log('On DUT1 configure vlan and IPv4 and IPv6 addresses on it')
vlan_obj.create_vlan(data.dut1_client, data.dut1_dut2_vlan[0])
vlan_obj.add_vlan_member(data.dut1_client, data.dut1_dut2_vlan[0],
data.d1_d2_ports[1], True, True)
ip_obj.config_ip_addr_interface(data.dut1_client,
'Vlan' + data.dut1_dut2_vlan[0],
data.dut1_dut2_ipv6[1],
data.dut1_dut2_ipv6_subnet, 'ipv6')
ip_obj.config_ip_addr_interface(data.dut1_client,
'Vlan' + data.dut1_dut2_vlan[0],
data.dut1_dut2_ip[1],
data.dut1_dut2_ip_subnet, 'ipv4')
st.log('On DUT1 configure portchannel and IPv4 and IPv6 addresses on it')
pc_obj.create_portchannel(data.dut1_client, data.portchannel)
pc_obj.add_portchannel_member(data.dut1_client, data.portchannel,
[data.d1_d2_ports[2], data.d1_d2_ports[3]])
ip_obj.config_ip_addr_interface(data.dut1_client, data.portchannel,
data.dut1_dut2_ipv6[2],
data.dut1_dut2_ipv6_subnet, 'ipv6')
ip_obj.config_ip_addr_interface(data.dut1_client, data.portchannel,
data.dut1_dut2_ip[2],
data.dut1_dut2_ip_subnet, 'ipv4')
st.log('On DUT1 configure loopback and IPv4 and IPv6 addresses on it')
ip_obj.configure_loopback(data.dut1_client,
config='yes',
loopback_name=data.dut1_loopback[0])
ip_obj.config_ip_addr_interface(data.dut1_client, data.dut1_loopback[0],
data.dut1_loopback_ipv6[0],
data.dut1_loopback_ipv6_subnet, 'ipv6')
ip_obj.config_ip_addr_interface(data.dut1_client, data.dut1_loopback[0],
data.dut1_loopback_ip[0],
data.dut1_loopback_ip_subnet, 'ipv4')
st.log('IPv4 and IPv6 static routes for loopback reachability')
ip_obj.create_static_route(data.dut1_client,
data.dut2_dut1_ip[0],
data.dut2_loopback_ip[0] + '/32',
family='ipv4')
ip_obj.create_static_route(data.dut1_client,
data.dut2_dut1_ipv6[0],
data.dut2_loopback_ipv6[0] + '/128',
family='ipv6')
return True
def dut2_unconfig(config=''):
st.log(
'On DUT2 unconfigure loopback and remove IPv4 and IPv6 addresses on it'
)
ip_obj.delete_ip_interface(data.dut2_server, data.dut2_loopback[0],
data.dut2_loopback_ipv6[0],
data.dut2_loopback_ipv6_subnet, 'ipv6')
ip_obj.delete_ip_interface(data.dut2_server, data.dut2_loopback[0],
data.dut2_loopback_ip[0],
data.dut2_loopback_ip_subnet, 'ipv4')
ip_obj.configure_loopback(data.dut2_server,
config='no',
loopback_name=data.dut2_loopback[0])
st.log(
'On DUT2 unconfigure portchannel and remove IPv4 and IPv6 addresses on it'
)
ip_obj.delete_ip_interface(data.dut2_server, data.portchannel,
data.dut2_dut1_ipv6[2],
data.dut2_dut1_ipv6_subnet, 'ipv6')
ip_obj.delete_ip_interface(data.dut2_server, data.portchannel,
data.dut2_dut1_ip[2], data.dut2_dut1_ip_subnet,
'ipv4')
pc_obj.add_del_portchannel_member(
data.dut2_server, data.portchannel,
[data.d2_d1_ports[2], data.d2_d1_ports[3]], 'del')
pc_obj.delete_portchannel(data.dut2_server, data.portchannel)
st.log('On DUT2 unconfigure vlan and remove IPv4 and IPv6 addresses on it')
ip_obj.delete_ip_interface(data.dut2_server,
'Vlan' + data.dut1_dut2_vlan[0],
data.dut2_dut1_ipv6[1],
data.dut2_dut1_ipv6_subnet, 'ipv6')
ip_obj.delete_ip_interface(data.dut2_server,
'Vlan' + data.dut1_dut2_vlan[0],
data.dut2_dut1_ip[1], data.dut2_dut1_ip_subnet,
'ipv4')
vlan_obj.delete_vlan_member(data.dut2_server, data.dut1_dut2_vlan[0],
data.d2_d1_ports[1], True)
vlan_obj.delete_vlan(data.dut2_server, data.dut1_dut2_vlan[0])
st.log('On DUT2 remove IPv4 and IPv6 addresses on physical interface')
ip_obj.delete_ip_interface(data.dut2_server, data.d2_d1_ports[0],
data.dut2_dut1_ipv6[0],
data.dut2_dut1_ipv6_subnet, 'ipv6')
ip_obj.delete_ip_interface(data.dut2_server, data.d2_d1_ports[0],
data.dut2_dut1_ip[0], data.dut2_dut1_ip_subnet,
'ipv4')
st.log('On DUT2 remove IPv4 and IPv6 addresses on management interface')
ip_obj.delete_ip_interface(data.dut2_server, data.mgmt_intf,
data.dut2_mgmt_ipv6[0],
data.dut2_mgmt_ipv6_subnet, 'ipv6')
return True
def dut1_unconfig(config=''):
st.banner('Unconfigure IPv4 and IPv6 addresses on the loopback interfaces')
ip_obj.delete_ip_interface(data.dut1_client, data.dut1_loopback[0],
data.dut1_loopback_ipv6[0],
data.dut1_loopback_ipv6_subnet, 'ipv6')
ip_obj.delete_ip_interface(data.dut1_client, data.dut1_loopback[0],
data.dut1_loopback_ip[0],
data.dut1_loopback_ip_subnet, 'ipv4')
ip_obj.configure_loopback(data.dut1_client,
config='no',
loopback_name=data.dut1_loopback[0])
st.banner('Unconfigure IPv4 and IPv6 addresses on portchannel of DUT1')
ip_obj.delete_ip_interface(data.dut1_client, data.portchannel,
data.dut1_dut2_ipv6[2],
data.dut1_dut2_ipv6_subnet, 'ipv6')
ip_obj.delete_ip_interface(data.dut1_client, data.portchannel,
data.dut1_dut2_ip[2], data.dut1_dut2_ip_subnet,
'ipv4')
pc_obj.add_del_portchannel_member(
data.dut1_client, data.portchannel,
[data.d1_d2_ports[2], data.d1_d2_ports[3]], 'del')
pc_obj.delete_portchannel(data.dut1_client, data.portchannel)
st.log('On DUT1 unconfigure vlan and IPv4 and IPv6 addresses on it')
ip_obj.delete_ip_interface(data.dut1_client,
'Vlan' + data.dut1_dut2_vlan[0],
data.dut1_dut2_ipv6[1],
data.dut1_dut2_ipv6_subnet, 'ipv6')
ip_obj.delete_ip_interface(data.dut1_client,
'Vlan' + data.dut1_dut2_vlan[0],
data.dut1_dut2_ip[1], data.dut1_dut2_ip_subnet,
'ipv4')
vlan_obj.delete_vlan_member(data.dut1_client, data.dut1_dut2_vlan[0],
data.d1_d2_ports[1], True)
vlan_obj.create_vlan(data.dut1_client, data.dut1_dut2_vlan[0])
st.banner(
'Unconfigure IPv4 and IPv6 addresses on physical interface of DUT1')
ip_obj.delete_ip_interface(data.dut1_client, data.d1_d2_ports[0],
data.dut1_dut2_ipv6[0],
data.dut1_dut2_ipv6_subnet, 'ipv6')
ip_obj.delete_ip_interface(data.dut1_client, data.d1_d2_ports[0],
data.dut1_dut2_ip[0], data.dut1_dut2_ip_subnet,
'ipv4')
st.log('Unconfigure IPv6 address on management interface of DUT1')
ip_obj.delete_ip_interface(data.dut1_client, data.mgmt_intf,
data.dut1_mgmt_ipv6[0],
data.dut1_mgmt_ipv6_subnet, 'ipv6')
return True
def config_ip_loopback(config='yes'):
st.banner("{}Config Loopback Addresses on interfaces on D2".format(
'Un' if config != 'yes' else ''))
config = 'add' if config == 'yes' else 'remove'
if config == 'add':
ipapi.configure_loopback(vars.D2,
loopback_name='Loopback1',
config='yes')
ipapi.config_ip_addr_interface(vars.D2,
'Loopback1',
eh_data.loopback4_1,
32,
family=eh_data.af_ipv4,
config=config)
ipapi.config_ip_addr_interface(vars.D2,
"Loopback1",
eh_data.loopback6_1,
128,
family=eh_data.af_ipv6,
config=config)
if config == 'remove':
ipapi.configure_loopback(vars.D2,
loopback_name='Loopback1',
config='no')
def dut3_config(config=''):
st.log('On DUT3 physical interface IPv4 and IPv6 addresses on it')
vrf_obj.config_vrf(dut=data.dut3_client,
vrf_name=data.dut3_vrf_phy,
config='yes')
vrf_obj.bind_vrf_interface(dut=data.dut3_client,
vrf_name=data.dut3_vrf_phy,
intf_name=data.d3_d2_ports[0],
config='yes')
ip_obj.config_ip_addr_interface(data.dut3_client, data.d3_d2_ports[0],
data.dut3_dut2_ipv6[0],
data.dut3_dut2_ipv6_subnet, 'ipv6')
ip_obj.config_ip_addr_interface(data.dut3_client, data.d3_d2_ports[0],
data.dut3_dut2_ip[0],
data.dut3_dut2_ip_subnet, 'ipv4')
vlan_obj.create_vlan(data.dut3_client, data.dut2_dut3_vlan[0])
vlan_obj.add_vlan_member(data.dut3_client, data.dut2_dut3_vlan[0],
data.d3_d2_ports[1], True, True)
st.log('On DUT3 configure vlan and IPv4 and IPv6 addresses on it')
vrf_obj.config_vrf(dut=data.dut3_client,
vrf_name=data.dut3_vrf_vlan,
config='yes')
vrf_obj.bind_vrf_interface(dut=data.dut3_client,
vrf_name=data.dut3_vrf_vlan,
intf_name='Vlan' + data.dut2_dut3_vlan[0],
config='yes')
ip_obj.config_ip_addr_interface(data.dut3_client,
'Vlan' + data.dut2_dut3_vlan[0],
data.dut3_dut2_ipv6[1],
data.dut3_dut2_ipv6_subnet, 'ipv6')
ip_obj.config_ip_addr_interface(data.dut3_client,
'Vlan' + data.dut2_dut3_vlan[0],
data.dut3_dut2_ip[1],
data.dut3_dut2_ip_subnet, 'ipv4')
st.log('On DUT3 configure portchannel and IPv4 and IPv6 addresses on it')
pc_obj.create_portchannel(data.dut3_client, data.portchannel_2)
pc_obj.add_portchannel_member(data.dut3_client, data.portchannel_2,
[data.d3_d2_ports[2], data.d3_d2_ports[3]])
vrf_obj.config_vrf(dut=data.dut3_client,
vrf_name=data.dut3_vrf_pc,
config='yes')
vrf_obj.bind_vrf_interface(dut=data.dut3_client,
vrf_name=data.dut3_vrf_pc,
intf_name=data.portchannel_2,
config='yes')
ip_obj.config_ip_addr_interface(data.dut3_client, data.portchannel_2,
data.dut3_dut2_ipv6[2],
data.dut3_dut2_ipv6_subnet, 'ipv6')
ip_obj.config_ip_addr_interface(data.dut3_client, data.portchannel_2,
data.dut3_dut2_ip[2],
data.dut3_dut2_ip_subnet, 'ipv4')
st.log('On DUT3 configure loopback and IPv4 and IPv6 addresses on it')
ip_obj.configure_loopback(data.dut3_client,
config='yes',
loopback_name=data.dut3_loopback[1])
vrf_obj.config_vrf(dut=data.dut3_client,
vrf_name=data.dut3_vrf_phy,
config='yes')
vrf_obj.bind_vrf_interface(dut=data.dut3_client,
vrf_name=data.dut3_vrf_phy,
intf_name=data.dut3_loopback[1],
config='yes')
ip_obj.config_ip_addr_interface(data.dut3_client, data.dut3_loopback[1],
data.dut3_loopback_ipv6[1],
data.dut3_loopback_ipv6_subnet, 'ipv6')
ip_obj.config_ip_addr_interface(data.dut3_client, data.dut3_loopback[1],
data.dut3_loopback_ip[1],
data.dut3_loopback_ip_subnet, 'ipv4')
st.log('IPv4 and IPv6 static routes for loopback reachability')
ip_obj.create_static_route(data.dut3_client,
data.dut2_dut3_ip[0],
data.dut2_loopback_ip[1] + '/32',
family='ipv4',
interface=data.d3_d2_ports[0],
vrf=data.dut3_vrf_phy)
ip_obj.create_static_route(data.dut3_client,
data.dut2_dut3_ipv6[0],
data.dut2_loopback_ipv6[1] + '/128',
family='ipv6',
interface=data.d3_d2_ports[0],
vrf=data.dut3_vrf_phy)
return True
def dut1_config():
result = True
st.log('On DUT1 configure vrfs and loopbacks')
result = vrf_obj.config_vrf(dut=data.dut1,
vrf_name=data.dut1_vrf[0],
config='yes')
result = ip_obj.configure_loopback(data.dut1,
config='yes',
loopback_name=[
data.dut1_loopback[0],
data.dut1_loopback[1],
data.dut1_loopback[2]
])
st.log('On DUT1 configure vlan')
result = vlan_obj.create_vlan(data.dut1, data.dut1_dut2_vlan[0])
result = vlan_obj.add_vlan_member(data.dut1, data.dut1_dut2_vlan[0],
data.d1_d2_ports[1], True, True)
st.log('On DUT1 configure portchannel')
result = pc_obj.create_portchannel(data.dut1, data.portchannel)
result = pc_obj.add_portchannel_member(
data.dut1, data.portchannel,
[data.d1_d2_ports[2], data.d1_d2_ports[3]])
st.log(
'On DUT1 bind all the loopbacks, physical, vlan and portchannel interfaces between the DUTs to the VRF'
)
result = vrf_obj.bind_vrf_interface(
dut=data.dut1,
vrf_name=[
data.dut1_vrf[0], data.dut1_vrf[0], data.dut1_vrf[0],
data.dut1_vrf[0], data.dut1_vrf[0], data.dut1_vrf[0],
data.dut1_vrf[0], data.dut1_vrf[0]
],
intf_name=[
data.dut1_tg_ports[0], data.dut1_loopback[0],
data.dut1_loopback[1], data.dut1_loopback[2], data.d1_d2_ports[0],
'Vlan' + data.dut1_dut2_vlan[0], data.portchannel
],
config='yes')
st.banner('On DUT1 verify vrf bindings for all the interfaces')
output = vrf_obj.get_vrf_verbose(dut=data.dut1, vrfname=data.dut1_vrf[0])
if data.dut1_vrf[0] in output['vrfname']:
st.log('VRF configured on DUT1 is as expected', data.dut1_vrf[0])
else:
st.error('VRF name configured on DUT1 is as not expected',
data.dut1_vrf[0])
result = False
for value in output['interfaces']:
if data.dut1_tg_ports[0] or data.dut1_loopback[
0] or data.dut1_loopback[1] or data.dut1_loopback[
2] or data.d1_d2_ports[0] or 'Vlan' + data.dut1_dut2_vlan[
0] or data.portchannel == value:
st.log('Bind to VRF is as expected', value)
else:
st.error('Bind to VRF is not as expected', value)
result = False
st.log(
'On DUT1 configure OSPF router ID, ospf networks and add all the ospf interfaces'
)
result = ip_obj.config_ip_addr_interface(data.dut1, data.dut1_loopback[0],
data.dut1_loopback_ipv6[0],
data.ipv6_loopback_prefix, 'ipv6')
result = ip_obj.config_ip_addr_interface(data.dut1, data.dut1_loopback[0],
data.dut1_loopback_ip[0],
data.ip_loopback_prefix, 'ipv4')
result = ip_obj.config_ip_addr_interface(data.dut1, data.dut1_loopback[1],
data.dut1_loopback_ipv6[1],
data.ipv6_loopback_prefix, 'ipv6')
result = ip_obj.config_ip_addr_interface(data.dut1, data.dut1_loopback[1],
data.dut1_loopback_ip[1],
data.ip_loopback_prefix, 'ipv4')
result = ip_obj.config_ip_addr_interface(data.dut1, data.dut1_loopback[2],
data.dut1_loopback_ipv6[2],
data.ipv6_loopback_prefix, 'ipv6')
result = ip_obj.config_ip_addr_interface(data.dut1, data.dut1_loopback[2],
data.dut1_loopback_ip[2],
data.ip_loopback_prefix, 'ipv4')
st.log(
'On DUT1 configure OSPF router ID, ospf networks and add all the ospf interfaces'
)
result = ospf_obj.config_ospf_router_id(data.dut1,
data.dut1_ospf_router_id,
data.dut1_vrf[0], '', 'yes')
result = ospf_obj.config_ospf_network(
data.dut1, data.dut1_loopback_ip[0] + '/' + data.ip_loopback_prefix, 0,
data.dut1_vrf[0], '', 'yes')
result = ospf_obj.config_ospf_network(
data.dut1, data.dut1_loopback_ip[1] + '/' + data.ip_loopback_prefix, 0,
data.dut1_vrf[0], '', 'yes')
result = ospf_obj.config_ospf_network(
data.dut1, data.dut1_loopback_ip[2] + '/' + data.ip_loopback_prefix, 0,
data.dut1_vrf[0], '', 'yes')
result = ospf_obj.config_ospf_network(data.dut1, data.dut1_tg1_network_v4,
0, data.dut1_vrf[0], '', 'yes')
result = ospf_obj.config_interface_ip_ospf_network_type(
data.dut1, data.d1_d2_ports[0], 'point-to-point', data.dut1_vrf[0],
'yes')
result = ospf_obj.config_interface_ip_ospf_network_type(
data.dut1, 'Vlan' + data.dut1_dut2_vlan[0], 'point-to-point',
data.dut1_vrf[0], 'yes')
result = ospf_obj.config_interface_ip_ospf_network_type(
data.dut1, data.portchannel, 'point-to-point', data.dut1_vrf[0], 'yes')
st.log('On DUT1 configure IP addresses on DUT - TG interfaces')
ip_obj.config_ip_addr_interface(data.dut1, data.dut1_tg_ports[0],
data.dut1_tg_ipv6[0], data.tg_ipv6_subnet,
'ipv6')
ip_obj.config_ip_addr_interface(data.dut1, data.dut1_tg_ports[0],
data.dut1_tg_ip[0], data.tg_ip_subnet,
'ipv4')
return result
def dut2_unconfig():
result = 0
st.log('On Configure IP addresses on DUT2 - TG interfaces')
result = ip_obj.delete_ip_interface(data.dut2, data.dut2_tg_ports[0],
data.dut2_tg_ipv6[0],
data.tg_ipv6_subnet, 'ipv6')
result = ip_obj.delete_ip_interface(data.dut2, data.dut2_tg_ports[0],
data.dut2_tg_ip[0], data.tg_ip_subnet,
'ipv4')
result = arp_obj.config_static_ndp(data.dut2,
data.tg_dut2_ipv6[0],
'00:00:33:33:33:02',
data.dut2_tg_ports[0],
operation="del")
result = arp_obj.delete_static_arp(data.dut2, data.tg_dut2_ip[0],
'00:00:33:33:33:01')
st.log(
'On DUT2 unconfigure OSPF router ID, ospf networks and add all the ospf interfaces'
)
result = ospf_obj.config_interface_ip_ospf_network_type(
data.dut2, data.d2_d1_ports[0], 'point-to-point', 'default', 'no')
result = ospf_obj.config_interface_ip_ospf_network_type(
data.dut2, 'Vlan' + data.dut1_dut2_vlan[0], 'point-to-point',
'default', 'no')
result = ospf_obj.config_interface_ip_ospf_network_type(
data.dut2, data.portchannel, 'point-to-point', 'default', 'no')
result = ospf_obj.config_ospf_network(
data.dut2, data.dut2_loopback_ip[0] + '/' + data.ip_loopback_prefix, 0,
'default', '', 'no')
result = ospf_obj.config_ospf_router_id(data.dut2,
data.dut2_ospf_router_id,
'default', '', 'no')
st.log(
'On DUT2 unconfigure loopback and remove IPv4 and IPv6 addresses on it'
)
result = ip_obj.delete_ip_interface(data.dut2_server,
data.dut2_loopback[0],
data.dut2_loopback_ipv6[0],
data.dut2_loopback_ipv6_subnet, 'ipv6')
result = ip_obj.delete_ip_interface(data.dut2_server,
data.dut2_loopback[0],
data.dut2_loopback_ip[0],
data.dut2_loopback_ip_subnet, 'ipv4')
result = ip_obj.configure_loopback(data.dut2_server,
config='no',
loopback_name=data.dut2_loopback[0])
st.log(
'On DUT2 unconfigure portchannel and remove IPv4 and IPv6 addresses on it'
)
result = ip_obj.delete_ip_interface(data.dut2_server, data.portchannel,
data.dut2_dut1_ipv6[2],
data.dut2_dut1_ipv6_subnet, 'ipv6')
result = ip_obj.delete_ip_interface(data.dut2_server, data.portchannel,
data.dut2_dut1_ip[2],
data.dut2_dut1_ip_subnet, 'ipv4')
result = pc_obj.add_del_portchannel_member(
data.dut2_server, data.portchannel,
[data.d2_d1_ports[2], data.d2_d1_ports[3]], 'del')
result = pc_obj.delete_portchannel(data.dut2_server, data.portchannel)
st.log('On DUT2 unconfigure vlan and remove IPv4 and IPv6 addresses on it')
result = ip_obj.delete_ip_interface(data.dut2,
'Vlan' + data.dut1_dut2_vlan[0],
data.dut2_dut1_ipv6[1],
data.dut2_dut1_ipv6_subnet, 'ipv6')
result = ip_obj.delete_ip_interface(data.dut2,
'Vlan' + data.dut1_dut2_vlan[0],
data.dut2_dut1_ip[1],
data.dut2_dut1_ip_subnet, 'ipv4')
result = vlan_obj.delete_vlan_member(data.dut2, data.dut1_dut2_vlan[0],
data.d2_d1_ports[1], True)
result = vlan_obj.delete_vlan(data.dut2, data.dut1_dut2_vlan[0])
st.log('On DUT2 remove IPv4 and IPv6 addresses on physical interface')
result = ip_obj.delete_ip_interface(data.dut2, data.d2_d1_ports[0],
data.dut2_dut1_ipv6[0],
data.dut2_dut1_ipv6_subnet, 'ipv6')
result = ip_obj.delete_ip_interface(data.dut2, data.d2_d1_ports[0],
data.dut2_dut1_ip[0],
data.dut2_dut1_ip_subnet, 'ipv4')
return result
def dut2_config():
result = True
st.log('On DUT2 configure loopback')
result = ip_obj.configure_loopback(data.dut2,
config='yes',
loopback_name=[
data.dut2_loopback[0],
data.dut2_loopback[1],
data.dut2_loopback[2]
])
st.log('On DUT2 configure vlan')
result = vlan_obj.create_vlan(data.dut2, data.dut1_dut2_vlan[0])
result = vlan_obj.add_vlan_member(data.dut2, data.dut1_dut2_vlan[0],
data.d2_d1_ports[1], True, True)
st.log('On DUT2 configure portchannel')
result = pc_obj.create_portchannel(data.dut2, data.portchannel)
result = pc_obj.add_portchannel_member(
data.dut2, data.portchannel,
[data.d2_d1_ports[2], data.d2_d1_ports[3]])
st.log(
'On DUT2 configure OSPF router ID, ospf networks and add all the ospf interfaces'
)
result = ip_obj.config_ip_addr_interface(data.dut2, data.dut2_loopback[0],
data.dut2_loopback_ipv6[0],
data.ipv6_loopback_prefix, 'ipv6')
result = ip_obj.config_ip_addr_interface(data.dut2, data.dut2_loopback[0],
data.dut2_loopback_ip[0],
data.ip_loopback_prefix, 'ipv4')
result = ip_obj.config_ip_addr_interface(data.dut2, data.dut2_loopback[1],
data.dut2_loopback_ipv6[1],
data.ipv6_loopback_prefix, 'ipv6')
result = ip_obj.config_ip_addr_interface(data.dut2, data.dut2_loopback[1],
data.dut2_loopback_ip[1],
data.ip_loopback_prefix, 'ipv4')
result = ip_obj.config_ip_addr_interface(data.dut2, data.dut2_loopback[2],
data.dut2_loopback_ipv6[2],
data.ipv6_loopback_prefix, 'ipv6')
result = ip_obj.config_ip_addr_interface(data.dut2, data.dut2_loopback[2],
data.dut2_loopback_ip[2],
data.ip_loopback_prefix, 'ipv4')
st.log(
'On DUT2 configure OSPF router ID, ospf networks and add all the ospf interfaces'
)
result = ospf_obj.config_ospf_router_id(data.dut2,
data.dut2_ospf_router_id,
'default', '', 'yes')
result = ospf_obj.config_ospf_network(
data.dut2, data.dut2_loopback_ip[0] + '/' + data.ip_loopback_prefix, 0,
'default', '', 'yes')
result = ospf_obj.config_ospf_network(
data.dut2, data.dut2_loopback_ip[1] + '/' + data.ip_loopback_prefix, 0,
'default', '', 'yes')
result = ospf_obj.config_ospf_network(
data.dut2, data.dut2_loopback_ip[2] + '/' + data.ip_loopback_prefix, 0,
'default', '', 'yes')
result = ospf_obj.config_ospf_network(data.dut2, data.dut2_tg1_network_v4,
0, 'default', '', 'yes')
result = ospf_obj.config_interface_ip_ospf_network_type(
data.dut2, data.d2_d1_ports[0], 'point-to-point', 'default', 'yes')
result = ospf_obj.config_interface_ip_ospf_network_type(
data.dut2, 'Vlan' + data.dut1_dut2_vlan[0], 'point-to-point',
'default', 'yes')
result = ospf_obj.config_interface_ip_ospf_network_type(
data.dut2, data.portchannel, 'point-to-point', 'default', 'yes')
st.log('On DUT2 configure IP addresses on DUT2 - TG interfaces')
result = ip_obj.config_ip_addr_interface(data.dut2, data.dut2_tg_ports[0],
data.dut2_tg_ipv6[0],
data.tg_ipv6_subnet, 'ipv6')
result = ip_obj.config_ip_addr_interface(data.dut2, data.dut2_tg_ports[0],
data.dut2_tg_ip[0],
data.tg_ip_subnet, 'ipv4')
result = arp_obj.add_static_arp(data.dut2, data.tg_dut2_ip[0],
'00:00:33:33:33:01', data.dut2_tg_ports[0])
return result
def dut1_unconfig():
result = 0
st.log('On DUT1 unconfigure IP addresses on DUT - TG interfaces')
ip_obj.delete_ip_interface(data.dut1, data.dut1_tg_ports[0],
data.dut1_tg_ipv6[0], data.tg_ipv6_subnet,
'ipv6')
ip_obj.delete_ip_interface(data.dut1, data.dut1_tg_ports[0],
data.dut1_tg_ip[0], data.tg_ip_subnet, 'ipv4')
st.log(
'On DUT1 Unonfigure OSPF router ID, ospf network and add all the ospf interfaces'
)
result = ospf_obj.config_interface_ip_ospf_network_type(
data.dut1, data.d1_d2_ports[0], 'point-to-point', data.dut1_vrf[0],
'no')
result = ospf_obj.config_interface_ip_ospf_network_type(
data.dut1, 'Vlan' + data.dut1_dut2_vlan[0], 'point-to-point',
data.dut1_vrf[0], 'no')
result = ospf_obj.config_interface_ip_ospf_network_type(
data.dut1, data.portchannel, 'point-to-point', data.dut1_vrf[0], 'no')
result = ospf_obj.config_ospf_network(
data.dut1, data.dut1_loopback_ip[0] + '/' + data.ip_loopback_prefix, 0,
data.dut1_vrf[0], '', 'no')
result = ospf_obj.config_ospf_network(
data.dut1, data.dut1_loopback_ip[1] + '/' + data.ip_loopback_prefix, 0,
data.dut1_vrf[0], '', 'no')
result = ospf_obj.config_ospf_network(
data.dut1, data.dut1_loopback_ip[2] + '/' + data.ip_loopback_prefix, 0,
data.dut1_vrf[0], '', 'no')
result = ospf_obj.config_ospf_router_id(data.dut1,
data.dut1_ospf_router_id,
data.dut1_vrf[0], '', 'no')
st.banner('Unconfigure IPv4 and IPv6 addresses on the loopback interfaces')
result = ip_obj.delete_ip_interface(data.dut1, data.dut1_loopback[0],
data.dut1_loopback_ipv6[0],
data.ipv6_loopback_prefix, 'ipv6')
result = ip_obj.delete_ip_interface(data.dut1, data.dut1_loopback[0],
data.dut1_loopback_ip[0],
data.ip_loopback_prefix, 'ipv4')
result = ip_obj.delete_ip_interface(data.dut1, data.dut1_loopback[1],
data.dut1_loopback_ipv6[1],
data.ipv6_loopback_prefix, 'ipv6')
result = ip_obj.delete_ip_interface(data.dut1, data.dut1_loopback[1],
data.dut1_loopback_ip[1],
data.ip_loopback_prefix, 'ipv4')
result = ip_obj.delete_ip_interface(data.dut1, data.dut1_loopback[2],
data.dut1_loopback_ipv6[2],
data.ipv6_loopback_prefix, 'ipv6')
result = ip_obj.delete_ip_interface(data.dut1, data.dut1_loopback[2],
data.dut1_loopback_ip[2],
data.ip_loopback_prefix, 'ipv4')
st.log(
'On DUT1 unbind all the loopbacks, physical, vlan and portchannel interfaces to the VRF'
)
result = vrf_obj.bind_vrf_interface(
dut=data.dut1,
vrf_name=data.dut1_vrf[0],
intf_name=[
data.dut1_loopback[0], data.dut1_loopback[1],
data.dut1_loopback[2], data.d1_d2_ports[0],
'Vlan' + data.dut1_dut2_vlan[0], data.portchannel
],
config='no')
st.log('On DUT1 unconfigure vlan')
result = vlan_obj.delete_vlan_member(data.dut1_client,
data.dut1_dut2_vlan[0],
data.d1_d2_ports[1], True)
result = vlan_obj.create_vlan(data.dut1_client, data.dut1_dut2_vlan[0])
st.banner('Unconfigure portchannel on DUT1')
result = pc_obj.add_del_portchannel_member(
data.dut1_client, data.portchannel,
[data.d1_d2_ports[2], data.d1_d2_ports[3]], 'del')
result = pc_obj.delete_portchannel(data.dut1_client, data.portchannel)
st.log('On DUT1 unconfigure vrfs and loopbacks')
result = ip_obj.configure_loopback(data.dut1,
config='no',
loopback_name=[
data.dut1_loopback[0],
data.dut1_loopback[1],
data.dut1_loopback[2]
])
result = vrf_obj.config_vrf(dut=data.dut3_client,
vrf_name=data.dut1_vrf[0],
config='no')
return result
def bind_vrf_interface(dut, **kwargs):
"""
#Sonic cmd: Config interface <bind |unbind> <interface-name> <vrf-name>
eg: bind_vrf_interface(dut = dut1, vrf_name = 'Vrf-test', intf_name ='Ethernet8', config = 'no')
"""
st.log('API to bind interface to VRF')
if 'config' in kwargs:
config = kwargs['config']
else:
config = 'yes'
if 'vrf_name' in kwargs:
if not isinstance(kwargs['vrf_name'], list):
vrf_name = [kwargs['vrf_name']]
else:
vrf_name = kwargs['vrf_name']
else:
st.log("Mandatory parameter vrfname is not found")
if 'intf_name' in kwargs:
if not isinstance(kwargs['intf_name'], list):
intf_name = [kwargs['intf_name']]
else:
intf_name = kwargs['intf_name']
else:
st.log("Mandatory parameter intf_name is not found")
if 'skip_error' in kwargs:
skip_error = kwargs['skip_error']
else:
skip_error = False
cli_type = kwargs.pop('cli_type', st.get_ui_type(dut))
if cli_type == 'click':
my_cmd = ''
if config.lower() == 'yes':
for vrf, intf in zip(vrf_name, intf_name):
if 'Loopback' in intf:
if not st.is_feature_supported(
"config-loopback-add-command", dut):
st.log(
"Community build doesn't need Loopback interface configuration"
)
else:
my_cmd += 'sudo config loopback add {}\n'.format(intf)
my_cmd += 'sudo config interface vrf bind {} {}\n'.format(
intf, vrf)
else:
for vrf, intf in zip(vrf_name, intf_name):
if not st.is_feature_supported("vrf-needed-for-unbind", dut):
my_cmd += 'sudo config interface vrf unbind {}\n'.format(
intf)
else:
my_cmd += 'sudo config interface vrf unbind {} {}\n'.format(
intf, vrf)
if 'Loopback' in intf:
if not st.is_feature_supported(
"config-loopback-add-command", dut):
st.log(
"Community build doesn't need Loopback interface un-configuration"
)
else:
my_cmd += 'sudo config loopback del {}\n'.format(intf)
if skip_error:
st.config(dut, my_cmd, skip_error_check=True)
return True
else:
st.config(dut, my_cmd)
return True
elif cli_type == 'klish':
command = ''
if config.lower() == 'yes':
for vrf, intf in zip(vrf_name, intf_name):
intfv = get_interface_number_from_name(intf)
command = command + "\n" + "interface {} {}".format(
intfv['type'], intfv['number'])
command = command + "\n" + "ip vrf forwarding {}".format(vrf)
command = command + "\n" + "exit"
else:
for vrf, intf in zip(vrf_name, intf_name):
intfv = get_interface_number_from_name(intf)
command = command + "\n" + "interface {} {}".format(
intfv['type'], intfv['number'])
command = command + "\n" + "no ip vrf forwarding {}".format(
vrf)
command = command + "\n" + "exit"
if 'Loopback' in intf:
command = command + "\n" + "no interface {} {}".format(
intfv['type'], intfv['number'])
output = st.config(dut,
command,
skip_error_check=skip_error,
type="klish",
conf=True)
if "Could not connect to Management REST Server" in output:
st.error("klish mode not working.")
return False
return True
elif cli_type in ['rest-patch', 'rest-put']:
http_method = kwargs.pop('http_method', cli_type)
rest_urls = st.get_datastore(dut, 'rest_urls')
if config.lower() == 'yes':
for vrf, intf in zip(vrf_name, intf_name):
intfv = get_interface_number_from_name(intf)
if 'Loopback' in intfv['type']:
configure_loopback(dut, loopback_name=intf, config='yes')
rest_url = rest_urls['vrf_bind_config'].format(vrf, intf)
ocdata = {
"openconfig-network-instance:interface": [{
"id": intf,
"config": {
"id": intf,
"interface": intf
}
}]
}
response = config_rest(dut,
http_method=http_method,
rest_url=rest_url,
json_data=ocdata)
if not response:
st.log(response)
return False
elif config.lower() == 'no':
for vrf, intf in zip(vrf_name, intf_name):
rest_url = rest_urls['vrf_bind_config'].format(vrf, intf)
response = delete_rest(dut, rest_url=rest_url)
if not response:
st.log(response)
return False
intfv = get_interface_number_from_name(intf)
if 'Loopback' in intfv['type']:
configure_loopback(dut, loopback_name=intf, config='no')
return True
else:
st.log("Unsupported cli")
