def ReadInfo_clicked(self):
if not self._check_connection():
return
try:
self.log("\n" +
self.tr("Read the card contained a base station state"))
state = self.sportiduino.read_state_card()
bs_state = BaseStation.State()
bs_state.version = Sportiduino.Version(*state['version'])
bs_state.config = BaseStation.Config.unpack(state['config'])
bs_state.battery = BaseStation.Battery(state['battery'])
bs_state.mode = state['mode']
bs_state.timestamp = state['timestamp']
bs_state.wakeuptime = state['wakeuptime']
self._show_base_station_state(bs_state)
except Exception as err:
self._process_error(err)
raise err
def on_eraseLogButton_clicked(self):
try:
if QMessageBox.question(
self, self.tr('Erase log'),
self.
tr('Are you sure you want to erase the base station log permanently?'
)) != QMessageBox.Yes:
return
self.log("\n" + self.tr("Erase log of a base station by UART"))
port = self.ui.cbUartPort.currentText()
BaseStation.erase_log_by_serial(port)
self.log(self.tr("Log has been erased successfully"))
except Exception as err:
self._process_error(err)
def SerialWrite_clicked(self):
try:
self.log("\n" + self.tr(
"Writes settings and password to a base station by UART"))
port = self.ui.cbUartPort.currentText()
bs_config = self._get_config_from_ui()
bs_config.num = self.ui.sbStationNumByUart.value()
wakeuptime = self._get_competion_datetime().toPyDateTime()
password = (self.ui.sbCurPwd1.value(), self.ui.sbCurPwd2.value(),
self.ui.sbCurPwd3.value())
BaseStation.write_settings_by_serial(port, password, bs_config,
wakeuptime)
self.log(
self.tr("Settings and password has been written successfully"))
except Exception as err:
self._process_error(err)
def SerialRead_clicked(self):
try:
self.log("\n" + self.tr("Reads info about a base station by UART"))
port = self.ui.cbUartPort.currentText()
password = (self.ui.sbCurPwd1.value(), self.ui.sbCurPwd2.value(),
self.ui.sbCurPwd3.value())
bs_state = BaseStation.read_info_by_serial(port, password)
self._show_base_station_state(bs_state)
except Exception as err:
self._process_error(err)
def _get_config_from_ui(self):
bs_config = BaseStation.Config()
bs_config.active_mode_duration = self.ui.cbActiveTime.currentIndex()
bs_config.check_start_finish = self.ui.cbStartFinish.isChecked()
bs_config.check_card_init_time = self.ui.cbCheckInitTime.isChecked()
bs_config.fast_punch = self.ui.cbFastPunch.isChecked()
bs_config.antenna_gain = self.ui.cbAntennaGain.currentIndex() + 2
bs_config.password = [
self.ui.sbNewPwd1.value(),
self.ui.sbNewPwd2.value(),
self.ui.sbNewPwd3.value()
]
return bs_config
def __init__(self, config):
super().__init__()
self.ui = design.Ui_MainWindow()
self.ui.setupUi(self)
self.setWindowTitle(
"SportiduinoPQ {}".format(sportiduinopq_version_string))
self.config = config
geometry = self.config.value('geometry')
if geometry is not None:
self.restoreGeometry(geometry)
self.connected = False
self.printer = QPrinter()
printer_name = config.value('printer/name', self.printer.printerName())
self.printer.setPrinterName(printer_name)
outputfilename = config.value('printer/outputfilename',
self.printer.outputFileName())
self.printer.setOutputFileName(outputfilename)
self.ui.printerName.setText(self.printer.printerName())
init_time = datetime.now()
self.cards_data_filename = os.path.join(
'data', 'cards{:%Y%m%d}.csv'.format(init_time))
if not os.path.exists(self.cards_data_filename):
with open(self.cards_data_filename, 'w') as cards_data_file:
cards_data_file.write(
'No.;Read at;Card no.;;;;;;;;;;;;;;;;Clear time;;;Check time;;;Start time;;;Finish time;No. of punches;;1.CP;;1.Time;2.CP;;2.Time;3.CP;;3.Time\n'
)
self.cards_data = []
self._logger = self.Logger()
self.log('{:%Y-%m-%d %H:%M:%S}'.format(init_time))
self.timer = QTimer(self)
self.timer.timeout.connect(self.poll_card)
availablePorts = []
if platform.system() == 'Linux':
availablePorts = [
os.path.join('/dev', f) for f in os.listdir('/dev')
if re.match('ttyUSB.+', f)
]
availablePorts.sort()
elif platform.system() == 'Windows':
availablePorts = ['COM' + str(i) for i in range(32)]
self.ui.choiseCom.addItems(availablePorts)
self.ui.cbUartPort.addItems(availablePorts)
self.ui.Connect.clicked.connect(self.Connect_clicked)
self.ui.ReadCard.clicked.connect(self.ReadCard_clicked)
self.ui.InitCard.clicked.connect(self.InitCard_clicked)
self.ui.SetTime.clicked.connect(self.SetTime_clicked)
self.ui.SetNum.clicked.connect(self.SetNum_clicked)
self.ui.SetStart.clicked.connect(self.SetStart_clicked)
self.ui.SetFinish.clicked.connect(self.SetFinish_clicked)
self.ui.CheckSt.clicked.connect(self.CheckSt_clicked)
self.ui.ClearSt.clicked.connect(self.ClearSt_clicked)
self.ui.LogCard.clicked.connect(self.LogCard_clicked)
self.ui.ReadLog.clicked.connect(self.ReadLog_clicked)
self.ui.SleepCard.clicked.connect(self.SleepCard_clicked)
self.ui.PassCard.clicked.connect(self.PassCard_clicked)
self.ui.SelectPrinter.clicked.connect(self.SelectPrinter_clicked)
self.ui.Print.clicked.connect(self.Print_clicked)
self.ui.btnApplyPwd.clicked.connect(self.ApplyPwd_clicked)
self.ui.btnCreateInfoCard.clicked.connect(self.CreateInfo_clicked)
self.ui.btnReadInfo.clicked.connect(self.ReadInfo_clicked)
self.ui.btnUartRead.clicked.connect(self.SerialRead_clicked)
self.ui.btnUartWrite.clicked.connect(self.SerialWrite_clicked)
self.ui.btnClearText.clicked.connect(self.ClearText_clicked)
self.ui.btnMsConfigRead.clicked.connect(self.btnMsConfigRead_clicked)
self.ui.btnMsConfigWrite.clicked.connect(self.write_ms_config)
self.ui.AutoRead.stateChanged.connect(self.autoread_change)
bs_config = BaseStation.Config()
for key, default_value in vars(bs_config).items():
value_type = type(default_value)
if isinstance(default_value, list):
value_type = type(default_value[0])
setattr(
bs_config, key,
self.config.value('settings/' + key,
default_value,
type=value_type))
self._apply_settings(bs_config, datetime.now())
self.ui.sbCurPwd1.setValue(bs_config.password[0])
self.ui.sbCurPwd2.setValue(bs_config.password[1])
self.ui.sbCurPwd3.setValue(bs_config.password[2])
ianaIds = QTimeZone.availableTimeZoneIds()
all_timezones = sorted(
{QTimeZone(id).offsetFromUtc(datetime.now())
for id in ianaIds})
tzlocaloffset = time.localtime().tm_gmtoff
tzlocalname = None
for dt in all_timezones:
tz = timezone(timedelta(seconds=dt))
tzname = tz.tzname(None)
if dt == tzlocaloffset:
tzlocalname = tzname
self.ui.cbTimeZone.addItem(tzname, dt)
if tzlocalname is not None:
self.ui.cbTimeZone.setCurrentText(tzlocalname)
else:
self.ui.cbTimeZone.setCurrentText(
timezone(offset=timedelta(0)).tzname(None))
def __init__(self, config):
super().__init__()
self.ui = design.Ui_MainWindow()
self.ui.setupUi(self)
self.setWindowTitle(
"SportiduinoPQ {}".format(sportiduinopq_version_string))
self.config = config
geometry = self.config.value('geometry')
if geometry is not None:
self.restoreGeometry(geometry)
self.connected = False
self.printer = QPrinter()
printer_name = config.value('printer/name', self.printer.printerName())
self.printer.setPrinterName(printer_name)
outputfilename = config.value('printer/outputfilename',
self.printer.outputFileName())
self.printer.setOutputFileName(outputfilename)
self.ui.printerName.setText(self.printer.printerName())
init_time = datetime.now()
self.cards_data_filename = os.path.join(
'data', 'cards{:%Y%m%d%H%M%S}.json'.format(init_time))
self.cards_data = []
self._logger = self.Logger()
self.log('{:%Y-%m-%d %H:%M:%S}'.format(init_time))
availablePorts = []
if platform.system() == 'Linux':
availablePorts = [
os.path.join('/dev', f) for f in os.listdir('/dev')
if re.match('ttyUSB.+', f)
]
availablePorts.sort()
elif platform.system() == 'Windows':
availablePorts = ['COM' + str(i) for i in range(32)]
self.ui.choiseCom.addItems(availablePorts)
self.ui.cbUartPort.addItems(availablePorts)
self.ui.Connect.clicked.connect(self.Connect_clicked)
self.ui.ReadCard.clicked.connect(self.ReadCard_clicked)
self.ui.InitCard.clicked.connect(self.InitCard_clicked)
self.ui.SetTime.clicked.connect(self.SetTime_clicked)
self.ui.SetNum.clicked.connect(self.SetNum_clicked)
self.ui.SetStart.clicked.connect(self.SetStart_clicked)
self.ui.SetFinish.clicked.connect(self.SetFinish_clicked)
self.ui.CheckSt.clicked.connect(self.CheckSt_clicked)
self.ui.ClearSt.clicked.connect(self.ClearSt_clicked)
self.ui.LogCard.clicked.connect(self.LogCard_clicked)
self.ui.ReadLog.clicked.connect(self.ReadLog_clicked)
self.ui.SleepCard.clicked.connect(self.SleepCard_clicked)
self.ui.PassCard.clicked.connect(self.PassCard_clicked)
self.ui.SelectPrinter.clicked.connect(self.SelectPrinter_clicked)
self.ui.Print.clicked.connect(self.Print_clicked)
self.ui.btnApplyPwd.clicked.connect(self.ApplyPwd_clicked)
self.ui.btnCreateInfoCard.clicked.connect(self.CreateInfo_clicked)
self.ui.btnReadInfo.clicked.connect(self.ReadInfo_clicked)
self.ui.btnUartRead.clicked.connect(self.SerialRead_clicked)
self.ui.btnUartWrite.clicked.connect(self.SerialWrite_clicked)
self.ui.btnClearText.clicked.connect(self.ClearText_clicked)
self.ui.btnMsConfigRead.clicked.connect(self.btnMsConfigRead_clicked)
self.ui.btnMsConfigWrite.clicked.connect(self.write_ms_config)
bs_config = BaseStation.Config()
for key, default_value in vars(bs_config).items():
value_type = type(default_value)
if isinstance(default_value, list):
value_type = type(default_value[0])
setattr(
bs_config, key,
self.config.value('settings/' + key,
default_value,
type=value_type))
self._apply_settings(bs_config, datetime.now())
self.ui.sbCurPwd1.setValue(bs_config.password[0])
self.ui.sbCurPwd2.setValue(bs_config.password[1])
self.ui.sbCurPwd3.setValue(bs_config.password[2])
