def initUI(self):
self.editor = TabEditor()
self.shell = Shell()
self.biiIdeWorkspace = BiiIdeWorkspace()
self.gui_configuration_path = os.path.join(self.gui_path, GUI_CONFIG)
self.project_selected = None
self.block_selected = None
self.port_selected = None
self.firmware_selected = None
self.board_selected = 'uno'
self.createProjectTreeView()
self.createBiiCommands()
editor_splitter = QtGui.QSplitter(QtCore.Qt.Vertical)
editor_splitter.addWidget(self.editor.tab_widget)
editor_splitter.addWidget(self.shell)
splitter = QtGui.QSplitter(QtCore.Qt.Horizontal)
splitter.addWidget(self.treeViewBox)
splitter.addWidget(editor_splitter)
splitter.addWidget(self.biiButtonsBox)
vbox = QtGui.QVBoxLayout(self)
vbox.addWidget(splitter)
self.setLayout(vbox)
if os.path.exists(self.gui_configuration_path):
gui_configuration = open(self.gui_configuration_path, "r")
ws_path = gui_configuration.readline()
gui_configuration.close()
if ws_path:
self._update_treeview_info(ws_path)
if not self.biiIdeWorkspace.path:
self.workspace_finder()
else:
gui_configuration = open(self.gui_configuration_path, "w")
gui_configuration.close()
self.workspace_finder()
def initUI(self):
self.editor = TabEditor()
self.shell = Shell()
self.biiIdeWorkspace = BiiIdeWorkspace()
self.gui_configuration_path = os.path.join(self.gui_path, GUI_CONFIG)
self.project_selected = None
self.block_selected = None
self.port_selected = None
self.firmware_selected = None
self.board_selected = 'uno'
self.createProjectTreeView()
self.createBiiCommands()
editor_splitter = QtGui.QSplitter(QtCore.Qt.Vertical)
editor_splitter.addWidget(self.editor.tab_widget)
editor_splitter.addWidget(self.shell)
splitter = QtGui.QSplitter(QtCore.Qt.Horizontal)
splitter.addWidget(self.treeViewBox)
splitter.addWidget(editor_splitter)
splitter.addWidget(self.biiButtonsBox)
vbox = QtGui.QVBoxLayout(self)
vbox.addWidget(splitter)
self.setLayout(vbox)
if os.path.exists(self.gui_configuration_path):
gui_configuration = open(self.gui_configuration_path, "r")
ws_path = gui_configuration.readline()
gui_configuration.close()
if ws_path:
self._update_treeview_info(ws_path)
if not self.biiIdeWorkspace.path:
self.workspace_finder()
else:
gui_configuration = open(self.gui_configuration_path, "w")
gui_configuration.close()
self.workspace_finder()
class CentralWidget(QtGui.QWidget):
def __init__(self, gui_path, parent=None):
super(CentralWidget, self).__init__(parent)
self.gui_path = gui_path
self.initUI()
def initUI(self):
self.editor = TabEditor()
self.shell = Shell()
self.biiIdeWorkspace = BiiIdeWorkspace()
self.gui_configuration_path = os.path.join(self.gui_path, GUI_CONFIG)
self.project_selected = None
self.block_selected = None
self.port_selected = None
self.firmware_selected = None
self.board_selected = 'uno'
self.createProjectTreeView()
self.createBiiCommands()
editor_splitter = QtGui.QSplitter(QtCore.Qt.Vertical)
editor_splitter.addWidget(self.editor.tab_widget)
editor_splitter.addWidget(self.shell)
splitter = QtGui.QSplitter(QtCore.Qt.Horizontal)
splitter.addWidget(self.treeViewBox)
splitter.addWidget(editor_splitter)
splitter.addWidget(self.biiButtonsBox)
vbox = QtGui.QVBoxLayout(self)
vbox.addWidget(splitter)
self.setLayout(vbox)
if os.path.exists(self.gui_configuration_path):
gui_configuration = open(self.gui_configuration_path, "r")
ws_path = gui_configuration.readline()
gui_configuration.close()
if ws_path:
self._update_treeview_info(ws_path)
if not self.biiIdeWorkspace.path:
self.workspace_finder()
else:
gui_configuration = open(self.gui_configuration_path, "w")
gui_configuration.close()
self.workspace_finder()
def createProjectTreeView(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import Arduino_boards
self.port_box = QtGui.QComboBox(self)
portEventFilter = ShowEventFilter(self._update_ports)
self.port_box.view().installEventFilter(portEventFilter)
self.port_box.activated[str].connect(self.handle_port_selector)
self.firmare_box = QtGui.QComboBox(self)
firmareEventFilter = ShowEventFilter(self._update_firmawares)
self.firmare_box.view().installEventFilter(firmareEventFilter)
self.firmare_box.activated[str].connect(self.handle_firmware_selector)
self.board_box = QtGui.QComboBox(self)
self.board_box.addItems(Arduino_boards)
self.board_box.activated[str].connect(self.handle_board_selector)
self.hive_selector = QtGui.QComboBox(self)
self.hive_selector.activated[str].connect(self.handle_hive_selector)
self.block_selector = QtGui.QComboBox(self)
self.block_selector.activated[str].connect(self.handle_block_selector)
self.view = QtGui.QTreeView()
self.fileSystemModel = QtGui.QFileSystemModel(self.view)
self.view.setModel(self.fileSystemModel)
self.view.setRootIndex(self.fileSystemModel.setRootPath(""))
self.view.hideColumn(0)
self.view.hideColumn(1)
self.view.hideColumn(2)
self.view.hideColumn(3)
self.connect(self.view, SIGNAL("doubleClicked(const QModelIndex&)"),
self.item_double_clicked)
port_title = QtGui.QLabel('Port')
board_title = QtGui.QLabel('Board')
firmware_title = QtGui.QLabel('Firmware')
hive_title = QtGui.QLabel('Projects')
block_title = QtGui.QLabel('Blocks')
hardwareBox = QtGui.QGroupBox()
hbox = QtGui.QHBoxLayout(self)
hbox.addWidget(port_title, 1)
hbox.addWidget(self.port_box, 4)
hbox.addWidget(board_title, 1)
hbox.addWidget(self.board_box, 4)
hardwareBox.setLayout(hbox)
firmwareBox = QtGui.QGroupBox()
hbox = QtGui.QHBoxLayout(self)
hbox.addWidget(firmware_title, 1)
hbox.addWidget(self.firmare_box, 4)
firmwareBox.setLayout(hbox)
hiveBox = QtGui.QGroupBox()
hbox = QtGui.QHBoxLayout(self)
hbox.addWidget(hive_title, 1)
hbox.addWidget(self.hive_selector, 4)
hiveBox.setLayout(hbox)
blockBox = QtGui.QGroupBox()
hbox = QtGui.QHBoxLayout(self)
hbox.addWidget(block_title, 1)
hbox.addWidget(self.block_selector, 4)
blockBox.setLayout(hbox)
vbox = QtGui.QVBoxLayout(self)
vbox.addWidget(hardwareBox)
vbox.addWidget(firmwareBox)
vbox.addWidget(hiveBox)
vbox.addWidget(blockBox)
vbox.addWidget(self.view)
self.treeViewBox = QtGui.QGroupBox("Workspace info")
self.treeViewBox.setLayout(vbox)
def createBiiCommands(self):
self.button_build = QtGui.QPushButton(QtGui.QIcon(BUILD),
' build',
self)
self.button_build.setIconSize(QtCore.QSize(40, 40))
self.button_build.clicked.connect(self.handleBuild)
self.button_build.setStyleSheet(button_style)
self.button_upload = QtGui.QPushButton(QtGui.QIcon(UPLOAD),
' upload',
self)
self.button_upload.setIconSize(QtCore.QSize(40, 40))
self.button_upload.clicked.connect(self.handleUpload)
self.button_upload.setStyleSheet(button_style)
self.button_find = QtGui.QPushButton(QtGui.QIcon(FIND),
' find',
self)
self.button_find.setIconSize(QtCore.QSize(40, 40))
self.button_find.clicked.connect(self.handleFind)
self.button_find.setStyleSheet(button_style)
self.button_settings = QtGui.QPushButton(QtGui.QIcon(SETTINGS),
' settings',
self)
self.button_settings.setIconSize(QtCore.QSize(40, 40))
self.button_settings.clicked.connect(self.handleSettings)
self.button_settings.setStyleSheet(button_style)
self.button_clean = QtGui.QPushButton(QtGui.QIcon(CLEAN),
' clean',
self)
self.button_clean.setIconSize(QtCore.QSize(40, 40))
self.button_clean.clicked.connect(self.handleClean)
self.button_clean.setStyleSheet(button_style)
self.button_monitor = QtGui.QPushButton(QtGui.QIcon(MONITOR),
' monitor',
self)
self.button_monitor.setIconSize(QtCore.QSize(40, 40))
self.button_monitor.clicked.connect(self.handleMonitor)
self.button_monitor.setStyleSheet(button_style)
self.button_publish = QtGui.QPushButton(QtGui.QIcon(PUBLISH),
' publish',
self)
self.button_publish.setIconSize(QtCore.QSize(40, 40))
self.button_publish.clicked.connect(self.handlePublish)
self.button_publish.setStyleSheet(button_style)
self.button_terminal = QtGui.QPushButton(QtGui.QIcon(TERMINAL),
' Terminal',
self)
self.button_terminal.setIconSize(QtCore.QSize(40, 40))
self.button_terminal.clicked.connect(self.handleTerminal)
self.button_terminal.setStyleSheet(button_style)
grid = QtGui.QGridLayout()
grid.addWidget(self.button_settings, 0, 0)
grid.addWidget(self.button_find, 1, 0)
grid.addWidget(self.button_build, 2, 0)
grid.addWidget(self.button_upload, 3, 0)
grid.addWidget(self.button_monitor, 4, 0)
grid.addWidget(self.button_publish, 5, 0)
grid.addWidget(self.button_clean, 6, 0)
grid.addWidget(self.button_terminal, 7, 0)
self.biiButtonsBox = QtGui.QGroupBox("commands")
self.biiButtonsBox.setLayout(grid)
self.biiButtonsBox.maximumHeight()
self.biiButtonsBox.setMaximumSize(180, self.biiButtonsBox.maximumHeight())
def createHardwareToolBar(self, toolbar):
toolbar.addWidget(QtGui.QLabel(' Port: '))
toolbar.addWidget(self.port_box)
toolbar.addWidget(QtGui.QLabel(' Firmware: '))
toolbar.addWidget(self.firmare_box)
def _update_firmawares(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import detect_firmwares
if self.block_selected:
firmwares = detect_firmwares(os.path.join(self.biiIdeWorkspace.path,
self.project_selected))
self.firmare_box.clear()
if firmwares:
self.firmare_box.addItems(firmwares)
self.firmware_selected = firmwares[0]
else:
self.firmware_selected = None
else:
self.firmware_selected = None
def _update_ports(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import detect_arduino_port
ports = detect_arduino_port()
self.port_box.clear()
if ports:
self.port_box.addItems(ports)
self.port_selected = ports[0]
else:
self.port_selected = None
def item_double_clicked(self, index):
path = self.fileSystemModel.filePath(index)
if os.path.isfile(path):
self.editor.openFile(path)
def handle_hive_selector(self, text):
self.project_selected = str(text)
self.block_selector.clear()
if self.project_selected:
default_blocks = self.biiIdeWorkspace.hive_blocks(self.project_selected)
self.block_selector.addItems(default_blocks)
self.block_selected = ""
if default_blocks:
self.block_selected = default_blocks[0]
else:
self.block_selected = ""
self._update_path_workspace_info()
def handle_block_selector(self, text):
self.block_selected = str(text)
self._update_path_workspace_info()
def handle_firmware_selector(self, text):
self.firmware_selected = str(text)
def handle_port_selector(self, text):
self.port_selected = str(text)
def handle_board_selector(self, text):
self.board_selected = str(text)
def _update_path_workspace_info(self):
self.block_path = os.path.join(self.biiIdeWorkspace.path,
self.project_selected,
"blocks",
self.block_selected)
os.chdir(self.block_path)
self._update_firmawares()
self.view.setRootIndex(self.fileSystemModel.setRootPath(self.block_path))
def createWorkspace(self):
file_dialog = QtGui.QFileDialog()
select_path = file_dialog.getExistingDirectory(parent=None,
caption=QString("Select the folder where create the workspace"))
if not str(select_path) == "":
if not os.path.exists(str(select_path)):
os.mkdir(str(select_path))
self._update_treeview_info(str(select_path))
if self.biiIdeWorkspace.path:
self._update_gui_config_file(self.biiIdeWorkspace.path)
def handNewProject(self):
from bii_ide.common.biicode.dev.biicode_tool_chain import newproject
text, ok = QtGui.QInputDialog.getText(self, 'New project',
'Project name:')
if ok and str(text) != "":
self.execute_bii_command(newproject, self.biiIdeWorkspace.path, str(text))
def handleTerminal(self):
if self.biiIdeWorkspace.path:
os.chdir(self.biiIdeWorkspace.path)
if sys.platform == "win32":
os.system("start")
elif sys.platform == "linux2":
os.system("x-terminal-emulator")
elif sys.platform == "darwin":
os.system("osascript -e 'tell application \"Terminal\" to do script \" \"'")
else:
pass
def handleBuild(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import build
self.execute_bii_command(build,
self.block_path,
self.board_selected,
self.port_selected)
def handleUpload(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import upload
self.execute_bii_command(upload, self.block_path, self.firmware_selected)
def handleFind(self):
from bii_ide.common.biicode.dev.biicode_tool_chain import find
self.execute_bii_command(find, self.block_path)
def handleClean(self):
from bii_ide.common.biicode.dev.biicode_tool_chain import clean
self.execute_bii_command(clean, self.block_path)
def handleSettings(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import settings
self.execute_bii_command(settings,
self.block_path,
self.board_selected,
self.port_selected)
def handleSetup(self):
from bii_ide.common.biicode.dev.biicode_tool_chain import setup
self.execute_bii_command(setup, self.biiIdeWorkspace.path)
def handleMonitor(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import monitor
self.execute_bii_command(monitor, self.block_path)
def handlePublish(self):
from bii_ide.common.biicode.dev.biicode_tool_chain import publish
default_blocks = []
if self.project_selected:
default_blocks = self.biiIdeWorkspace.hive_blocks(self.project_selected)
if default_blocks:
biipublish = BiiPublish(default_blocks)
biipublish.exec_()
# self.execute_bii_command(biipublish.request, self.block_path)
def refresh_info(self):
self._refresh_workspace_info()
def select_folder(self):
file_dialog = QtGui.QFileDialog()
select_ws = file_dialog.getExistingDirectory(parent=None,
caption=QString("Select Workspace Folder"))
self._update_treeview_info(str(select_ws))
if self.biiIdeWorkspace.path:
self._update_gui_config_file(self.biiIdeWorkspace.path)
def _update_treeview_info(self, workspace_path):
if workspace_path != "":
self.biiIdeWorkspace.setPath(workspace_path)
self._refresh_workspace_info()
elif not workspace_path == "":
QtGui.QMessageBox.about(self, "wrong folder", "Choose a biicode workspace")
self.select_folder()
elif not self.biiIdeWorkspace.path:
self.view.hideColumn(0)
self.hive_selector.clear()
self.block_selector.clear()
self.project_selected = None
self.block_selected = None
self.view.setRootIndex(self.fileSystemModel.setRootPath(""))
def _refresh_workspace_info(self):
self._update_ports()
if self.biiIdeWorkspace.path and self.biiIdeWorkspace.hives:
self._update_firmawares()
self.view.showColumn(0)
self.hive_selector.clear()
self.hive_selector.addItems(self.biiIdeWorkspace.hives)
if self.project_selected in self.biiIdeWorkspace.hives:
project_index = self.biiIdeWorkspace.hives.index(self.project_selected)
self.hive_selector.setCurrentIndex(project_index)
else:
self.project_selected = self.biiIdeWorkspace.hives[0]
self.block_selector.clear()
default_blocks = self.biiIdeWorkspace.hive_blocks(self.project_selected)
self.block_selector.addItems(default_blocks)
if self.block_selected in default_blocks:
self.block_selector.setCurrentIndex(default_blocks.index(self.block_selected))
else:
self.block_selected = default_blocks[0] if len(default_blocks) > 0 else ""
self._update_path_workspace_info()
else:
self.view.hideColumn(0)
self.firmare_box.clear()
self.hive_selector.clear()
self.block_selector.clear()
self.project_selected = None
self.block_selected = None
self.view.setRootIndex(self.fileSystemModel.setRootPath(""))
def _update_gui_config_file(self, ws_path):
gui_configuration = open(self.gui_configuration_path, "w")
gui_configuration.write(ws_path)
gui_configuration.close()
def workspace_finder(self):
init_popup = DialogWorkpace(self.gui_path)
init_popup.exec_()
self._update_treeview_info(init_popup.selected_path)
if self.biiIdeWorkspace.path:
self._update_gui_config_file(self.biiIdeWorkspace.path)
def execute_bii_command(self, function, exe_folder, *args, **kwargs):
if self.project_selected:
self.shell.setText("%s\n\n" % function.__doc__)
try:
error, out = function(self.shell.addText, exe_folder, *args, **kwargs)
if error:
self.shell.addText("\nunexpected error occured\n\n")
elif not out:
self.shell.addText("Finished\n\n")
self._refresh_workspace_info()
except PermissionException:
self.shell.setText("Permission Error. Execute bii-IDE as sudo")
self.error = SudoError()
self.error.show()
elif self.biiIdeWorkspace.path:
QtGui.QMessageBox.about(self, "There are any project", "Create a project first")
else:
QtGui.QMessageBox.about(self, "There are any workspace", "Select a workspace first")
self.workspace_finder()
class CentralWidget(QtGui.QWidget):
def __init__(self, gui_path, parent=None):
super(CentralWidget, self).__init__(parent)
self.gui_path = gui_path
self.initUI()
def initUI(self):
self.editor = TabEditor()
self.shell = Shell()
self.biiIdeWorkspace = BiiIdeWorkspace()
self.gui_configuration_path = os.path.join(self.gui_path, GUI_CONFIG)
self.project_selected = None
self.block_selected = None
self.port_selected = None
self.firmware_selected = None
self.board_selected = 'uno'
self.createProjectTreeView()
self.createBiiCommands()
editor_splitter = QtGui.QSplitter(QtCore.Qt.Vertical)
editor_splitter.addWidget(self.editor.tab_widget)
editor_splitter.addWidget(self.shell)
splitter = QtGui.QSplitter(QtCore.Qt.Horizontal)
splitter.addWidget(self.treeViewBox)
splitter.addWidget(editor_splitter)
splitter.addWidget(self.biiButtonsBox)
vbox = QtGui.QVBoxLayout(self)
vbox.addWidget(splitter)
self.setLayout(vbox)
if os.path.exists(self.gui_configuration_path):
gui_configuration = open(self.gui_configuration_path, "r")
ws_path = gui_configuration.readline()
gui_configuration.close()
if ws_path:
self._update_treeview_info(ws_path)
if not self.biiIdeWorkspace.path:
self.workspace_finder()
else:
gui_configuration = open(self.gui_configuration_path, "w")
gui_configuration.close()
self.workspace_finder()
def createProjectTreeView(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import Arduino_boards
self.port_box = QtGui.QComboBox(self)
portEventFilter = ShowEventFilter(self._update_ports)
self.port_box.view().installEventFilter(portEventFilter)
self.port_box.activated[str].connect(self.handle_port_selector)
self.firmare_box = QtGui.QComboBox(self)
firmareEventFilter = ShowEventFilter(self._update_firmawares)
self.firmare_box.view().installEventFilter(firmareEventFilter)
self.firmare_box.activated[str].connect(self.handle_firmware_selector)
self.board_box = QtGui.QComboBox(self)
self.board_box.addItems(Arduino_boards)
self.board_box.activated[str].connect(self.handle_board_selector)
self.hive_selector = QtGui.QComboBox(self)
self.hive_selector.activated[str].connect(self.handle_hive_selector)
self.block_selector = QtGui.QComboBox(self)
self.block_selector.activated[str].connect(self.handle_block_selector)
self.view = QtGui.QTreeView()
self.fileSystemModel = QtGui.QFileSystemModel(self.view)
self.view.setModel(self.fileSystemModel)
self.view.setRootIndex(self.fileSystemModel.setRootPath(""))
self.view.hideColumn(0)
self.view.hideColumn(1)
self.view.hideColumn(2)
self.view.hideColumn(3)
self.connect(self.view, SIGNAL("doubleClicked(const QModelIndex&)"),
self.item_double_clicked)
port_title = QtGui.QLabel('Port')
board_title = QtGui.QLabel('Board')
firmware_title = QtGui.QLabel('Firmware')
hive_title = QtGui.QLabel('Projects')
block_title = QtGui.QLabel('Blocks')
hardwareBox = QtGui.QGroupBox()
hbox = QtGui.QHBoxLayout(self)
hbox.addWidget(port_title, 1)
hbox.addWidget(self.port_box, 4)
hbox.addWidget(board_title, 1)
hbox.addWidget(self.board_box, 4)
hardwareBox.setLayout(hbox)
firmwareBox = QtGui.QGroupBox()
hbox = QtGui.QHBoxLayout(self)
hbox.addWidget(firmware_title, 1)
hbox.addWidget(self.firmare_box, 4)
firmwareBox.setLayout(hbox)
hiveBox = QtGui.QGroupBox()
hbox = QtGui.QHBoxLayout(self)
hbox.addWidget(hive_title, 1)
hbox.addWidget(self.hive_selector, 4)
hiveBox.setLayout(hbox)
blockBox = QtGui.QGroupBox()
hbox = QtGui.QHBoxLayout(self)
hbox.addWidget(block_title, 1)
hbox.addWidget(self.block_selector, 4)
blockBox.setLayout(hbox)
vbox = QtGui.QVBoxLayout(self)
vbox.addWidget(hardwareBox)
vbox.addWidget(firmwareBox)
vbox.addWidget(hiveBox)
vbox.addWidget(blockBox)
vbox.addWidget(self.view)
self.treeViewBox = QtGui.QGroupBox("Workspace info")
self.treeViewBox.setLayout(vbox)
def createBiiCommands(self):
self.button_build = QtGui.QPushButton(QtGui.QIcon(BUILD), ' build',
self)
self.button_build.setIconSize(QtCore.QSize(40, 40))
self.button_build.clicked.connect(self.handleBuild)
self.button_build.setStyleSheet(button_style)
self.button_upload = QtGui.QPushButton(QtGui.QIcon(UPLOAD),
' upload', self)
self.button_upload.setIconSize(QtCore.QSize(40, 40))
self.button_upload.clicked.connect(self.handleUpload)
self.button_upload.setStyleSheet(button_style)
self.button_find = QtGui.QPushButton(QtGui.QIcon(FIND), ' find',
self)
self.button_find.setIconSize(QtCore.QSize(40, 40))
self.button_find.clicked.connect(self.handleFind)
self.button_find.setStyleSheet(button_style)
self.button_settings = QtGui.QPushButton(QtGui.QIcon(SETTINGS),
' settings', self)
self.button_settings.setIconSize(QtCore.QSize(40, 40))
self.button_settings.clicked.connect(self.handleSettings)
self.button_settings.setStyleSheet(button_style)
self.button_clean = QtGui.QPushButton(QtGui.QIcon(CLEAN), ' clean',
self)
self.button_clean.setIconSize(QtCore.QSize(40, 40))
self.button_clean.clicked.connect(self.handleClean)
self.button_clean.setStyleSheet(button_style)
self.button_monitor = QtGui.QPushButton(QtGui.QIcon(MONITOR),
' monitor', self)
self.button_monitor.setIconSize(QtCore.QSize(40, 40))
self.button_monitor.clicked.connect(self.handleMonitor)
self.button_monitor.setStyleSheet(button_style)
self.button_publish = QtGui.QPushButton(QtGui.QIcon(PUBLISH),
' publish', self)
self.button_publish.setIconSize(QtCore.QSize(40, 40))
self.button_publish.clicked.connect(self.handlePublish)
self.button_publish.setStyleSheet(button_style)
self.button_terminal = QtGui.QPushButton(QtGui.QIcon(TERMINAL),
' Terminal', self)
self.button_terminal.setIconSize(QtCore.QSize(40, 40))
self.button_terminal.clicked.connect(self.handleTerminal)
self.button_terminal.setStyleSheet(button_style)
grid = QtGui.QGridLayout()
grid.addWidget(self.button_settings, 0, 0)
grid.addWidget(self.button_find, 1, 0)
grid.addWidget(self.button_build, 2, 0)
grid.addWidget(self.button_upload, 3, 0)
grid.addWidget(self.button_monitor, 4, 0)
grid.addWidget(self.button_publish, 5, 0)
grid.addWidget(self.button_clean, 6, 0)
grid.addWidget(self.button_terminal, 7, 0)
self.biiButtonsBox = QtGui.QGroupBox("commands")
self.biiButtonsBox.setLayout(grid)
self.biiButtonsBox.maximumHeight()
self.biiButtonsBox.setMaximumSize(180,
self.biiButtonsBox.maximumHeight())
def createHardwareToolBar(self, toolbar):
toolbar.addWidget(QtGui.QLabel(' Port: '))
toolbar.addWidget(self.port_box)
toolbar.addWidget(QtGui.QLabel(' Firmware: '))
toolbar.addWidget(self.firmare_box)
def _update_firmawares(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import detect_firmwares
if self.block_selected:
firmwares = detect_firmwares(
os.path.join(self.biiIdeWorkspace.path, self.project_selected))
self.firmare_box.clear()
if firmwares:
self.firmare_box.addItems(firmwares)
self.firmware_selected = firmwares[0]
else:
self.firmware_selected = None
else:
self.firmware_selected = None
def _update_ports(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import detect_arduino_port
ports = detect_arduino_port()
self.port_box.clear()
if ports:
self.port_box.addItems(ports)
self.port_selected = ports[0]
else:
self.port_selected = None
def item_double_clicked(self, index):
path = self.fileSystemModel.filePath(index)
if os.path.isfile(path):
self.editor.openFile(path)
def handle_hive_selector(self, text):
self.project_selected = str(text)
self.block_selector.clear()
if self.project_selected:
default_blocks = self.biiIdeWorkspace.hive_blocks(
self.project_selected)
self.block_selector.addItems(default_blocks)
self.block_selected = ""
if default_blocks:
self.block_selected = default_blocks[0]
else:
self.block_selected = ""
self._update_path_workspace_info()
def handle_block_selector(self, text):
self.block_selected = str(text)
self._update_path_workspace_info()
def handle_firmware_selector(self, text):
self.firmware_selected = str(text)
def handle_port_selector(self, text):
self.port_selected = str(text)
def handle_board_selector(self, text):
self.board_selected = str(text)
def _update_path_workspace_info(self):
self.block_path = os.path.join(self.biiIdeWorkspace.path,
self.project_selected, "blocks",
self.block_selected)
os.chdir(self.block_path)
self._update_firmawares()
self.view.setRootIndex(
self.fileSystemModel.setRootPath(self.block_path))
def createWorkspace(self):
file_dialog = QtGui.QFileDialog()
select_path = file_dialog.getExistingDirectory(
parent=None,
caption=QString("Select the folder where create the workspace"))
if not str(select_path) == "":
if not os.path.exists(str(select_path)):
os.mkdir(str(select_path))
self._update_treeview_info(str(select_path))
if self.biiIdeWorkspace.path:
self._update_gui_config_file(self.biiIdeWorkspace.path)
def handNewProject(self):
from bii_ide.common.biicode.dev.biicode_tool_chain import newproject
text, ok = QtGui.QInputDialog.getText(self, 'New project',
'Project name:')
if ok and str(text) != "":
self.execute_bii_command(newproject, self.biiIdeWorkspace.path,
str(text))
def handleTerminal(self):
if self.biiIdeWorkspace.path:
os.chdir(self.biiIdeWorkspace.path)
if sys.platform == "win32":
os.system("start")
elif sys.platform == "linux2":
os.system("x-terminal-emulator")
elif sys.platform == "darwin":
os.system(
"osascript -e 'tell application \"Terminal\" to do script \" \"'"
)
else:
pass
def handleBuild(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import build
self.execute_bii_command(build, self.block_path, self.board_selected,
self.port_selected)
def handleUpload(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import upload
self.execute_bii_command(upload, self.block_path,
self.firmware_selected)
def handleFind(self):
from bii_ide.common.biicode.dev.biicode_tool_chain import find
self.execute_bii_command(find, self.block_path)
def handleClean(self):
from bii_ide.common.biicode.dev.biicode_tool_chain import clean
self.execute_bii_command(clean, self.block_path)
def handleSettings(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import settings
self.execute_bii_command(settings, self.block_path,
self.board_selected, self.port_selected)
def handleSetup(self):
from bii_ide.common.biicode.dev.biicode_tool_chain import setup
self.execute_bii_command(setup, self.biiIdeWorkspace.path)
def handleMonitor(self):
from bii_ide.common.biicode.dev.arduino_tool_chain import monitor
self.execute_bii_command(monitor, self.block_path)
def handlePublish(self):
from bii_ide.common.biicode.dev.biicode_tool_chain import publish
default_blocks = []
if self.project_selected:
default_blocks = self.biiIdeWorkspace.hive_blocks(
self.project_selected)
if default_blocks:
biipublish = BiiPublish(default_blocks)
biipublish.exec_()
# self.execute_bii_command(biipublish.request, self.block_path)
def refresh_info(self):
self._refresh_workspace_info()
def select_folder(self):
file_dialog = QtGui.QFileDialog()
select_ws = file_dialog.getExistingDirectory(
parent=None, caption=QString("Select Workspace Folder"))
self._update_treeview_info(str(select_ws))
if self.biiIdeWorkspace.path:
self._update_gui_config_file(self.biiIdeWorkspace.path)
def _update_treeview_info(self, workspace_path):
if workspace_path != "":
self.biiIdeWorkspace.setPath(workspace_path)
self._refresh_workspace_info()
elif not workspace_path == "":
QtGui.QMessageBox.about(self, "wrong folder",
"Choose a biicode workspace")
self.select_folder()
elif not self.biiIdeWorkspace.path:
self.view.hideColumn(0)
self.hive_selector.clear()
self.block_selector.clear()
self.project_selected = None
self.block_selected = None
self.view.setRootIndex(self.fileSystemModel.setRootPath(""))
def _refresh_workspace_info(self):
self._update_ports()
if self.biiIdeWorkspace.path and self.biiIdeWorkspace.hives:
self._update_firmawares()
self.view.showColumn(0)
self.hive_selector.clear()
self.hive_selector.addItems(self.biiIdeWorkspace.hives)
if self.project_selected in self.biiIdeWorkspace.hives:
project_index = self.biiIdeWorkspace.hives.index(
self.project_selected)
self.hive_selector.setCurrentIndex(project_index)
else:
self.project_selected = self.biiIdeWorkspace.hives[0]
self.block_selector.clear()
default_blocks = self.biiIdeWorkspace.hive_blocks(
self.project_selected)
self.block_selector.addItems(default_blocks)
if self.block_selected in default_blocks:
self.block_selector.setCurrentIndex(
default_blocks.index(self.block_selected))
else:
self.block_selected = default_blocks[0] if len(
default_blocks) > 0 else ""
self._update_path_workspace_info()
else:
self.view.hideColumn(0)
self.firmare_box.clear()
self.hive_selector.clear()
self.block_selector.clear()
self.project_selected = None
self.block_selected = None
self.view.setRootIndex(self.fileSystemModel.setRootPath(""))
def _update_gui_config_file(self, ws_path):
gui_configuration = open(self.gui_configuration_path, "w")
gui_configuration.write(ws_path)
gui_configuration.close()
def workspace_finder(self):
init_popup = DialogWorkpace(self.gui_path)
init_popup.exec_()
self._update_treeview_info(init_popup.selected_path)
if self.biiIdeWorkspace.path:
self._update_gui_config_file(self.biiIdeWorkspace.path)
def execute_bii_command(self, function, exe_folder, *args, **kwargs):
if self.project_selected:
self.shell.setText("%s\n\n" % function.__doc__)
try:
error, out = function(self.shell.addText, exe_folder, *args,
**kwargs)
if error:
self.shell.addText("\nunexpected error occured\n\n")
elif not out:
self.shell.addText("Finished\n\n")
self._refresh_workspace_info()
except PermissionException:
self.shell.setText("Permission Error. Execute bii-IDE as sudo")
self.error = SudoError()
self.error.show()
elif self.biiIdeWorkspace.path:
QtGui.QMessageBox.about(self, "There are any project",
"Create a project first")
else:
QtGui.QMessageBox.about(self, "There are any workspace",
"Select a workspace first")
self.workspace_finder()