def add_node_red(force):
"""
Create a service for Node-RED.
"""
utils.check_config()
utils.confirm_mode()
name = 'node-red'
sudo = utils.optsudo()
host = utils.host_ip()
port = utils.getenv(const.HTTPS_PORT_KEY)
config = utils.read_compose()
if not force:
check_duplicate(config, name)
config['services'][name] = {
'image': 'brewblox/node-red:${BREWBLOX_RELEASE}',
'restart': 'unless-stopped',
'volumes': [
f'./{name}:/data',
]
}
sh(f'mkdir -p ./{name}')
if [getgid(), getuid()] != [1000, 1000]:
sh(f'sudo chown -R 1000:1000 ./{name}')
utils.write_compose(config)
click.echo(f'Added Node-RED service `{name}`.')
if utils.confirm('Do you want to run `brewblox-ctl up` now?'):
sh(f'{sudo}docker-compose up -d')
click.echo(
f'Visit https://{host}:{port}/{name} in your browser to load the editor.'
)
def check_ports():
if utils.path_exists('./docker-compose.yml'):
utils.info('Stopping services...')
sh('{}docker-compose down --remove-orphans'.format(utils.optsudo()))
ports = [
utils.getenv(key, const.ENV_DEFAULTS[key]) for key in [
const.HTTP_PORT_KEY,
const.HTTPS_PORT_KEY,
const.MDNS_PORT_KEY,
]
]
utils.info('Checking ports...')
retv = sh('sudo netstat -tulpn', capture=True)
lines = retv.split('\n')
used_ports = []
used_lines = []
for port in ports:
for line in lines:
if re.match(r'.*(:::|0.0.0.0:){}\s.*'.format(port), line):
used_ports.append(port)
used_lines.append(line)
break
if used_ports:
utils.warn(
'Port(s) {} already in use. '.format(', '.join(used_ports)) +
"Run 'brewblox-ctl service ports' to configure Brewblox ports.")
for line in used_lines:
utils.warn(line)
if not utils.confirm('Do you want to continue?'):
raise SystemExit(1)
def add_plaato(name, token, force):
"""
Create a service for the Plaato airlock.
This will periodically query the Plaato server for current state.
An authentication token is required.
See https://plaato.io/apps/help-center#!hc-auth-token on how to get one.
"""
utils.check_config()
utils.confirm_mode()
sudo = utils.optsudo()
config = utils.read_compose()
if not force:
check_duplicate(config, name)
config['services'][name] = {
'image': 'brewblox/brewblox-plaato:${BREWBLOX_RELEASE}',
'restart': 'unless-stopped',
'environment': {
'PLAATO_AUTH': token,
},
'command': f'--name={name}',
}
utils.write_compose(config)
click.echo(f'Added Plaato service `{name}`.')
click.echo(
'This service publishes history data, but does not have a UI component.'
)
if utils.confirm('Do you want to run `brewblox-ctl up` now?'):
sh(f'{sudo}docker-compose up -d')
def add_tilt(force):
"""
Create a service for the Tilt hydrometer.
The service listens for Bluetooth status updates from the Tilt,
and requires the host to have a Bluetooth receiver.
The empty ./tilt dir is created to hold calibration files.
"""
utils.check_config()
utils.confirm_mode()
name = 'tilt'
sudo = utils.optsudo()
config = utils.read_compose()
if not force:
check_duplicate(config, name)
config['services'][name] = {
'image': 'brewblox/brewblox-tilt:${BREWBLOX_RELEASE}',
'restart': 'unless-stopped',
'privileged': True,
'network_mode': 'host',
'volumes': [
f'./{name}:/share',
],
'labels': [
'traefik.enable=false',
],
}
sh(f'mkdir -p ./{name}')
utils.write_compose(config)
click.echo(f'Added Tilt service `{name}`.')
click.echo('It will automatically show up in the UI.\n')
if utils.confirm('Do you want to run `brewblox-ctl up` now?'):
sh(f'{sudo}docker-compose up -d')
def add_plaato(name, token, force):
"""
Create a service for the Plaato airlock.
This will periodically query the Plaato server for current state.
An authentication token is required.
See https://plaato.io/apps/help-center#!hc-auth-token on how to get one.
"""
utils.check_config()
utils.confirm_mode()
sudo = utils.optsudo()
config = utils.read_compose()
if name in config['services'] and not force:
click.echo(
'Service "{}" already exists. Use the --force flag if you want to overwrite it'
.format(name))
raise SystemExit(1)
config['services'][name] = {
'image': 'brewblox/brewblox-plaato:${BREWBLOX_RELEASE}',
'restart': 'unless-stopped',
'environment': {
'PLAATO_AUTH': token,
},
'command': '--name=' + name,
}
utils.write_compose(config)
click.echo("Added Plaato service '{}'.".format(name))
click.echo(
'This service publishes history data, but does not have a UI component.'
)
if utils.confirm("Do you want to run 'brewblox-ctl up' now?"):
sh('{}docker-compose up -d --remove-orphans'.format(sudo))
def add_node_red():
"""
Create a service for Node-RED.
"""
utils.check_config()
utils.confirm_mode()
name = 'node-red'
sudo = utils.optsudo()
host = utils.host_ip()
port = utils.getenv(const.HTTPS_PORT_KEY)
config = utils.read_compose()
if name in config['services']:
click.echo('The {} service already exists'.format(name))
raise SystemExit(1)
config['services'][name] = {
'image': 'brewblox/node-red:${BREWBLOX_RELEASE}',
'restart': 'unless-stopped',
'volumes': [
'./{}:/data'.format(name),
]
}
sh('mkdir -p ./{}'.format(name))
if [getgid(), getuid()] != [1000, 1000]:
sh('sudo chown 1000:1000 ./{}'.format(name))
utils.write_compose(config)
click.echo("Added Node-RED service '{}'.".format(name))
if utils.confirm("Do you want to run 'brewblox-ctl up' now?"):
sh('{}docker-compose up -d --remove-orphans'.format(sudo))
click.echo(
'Visit https://{}:{}/{} in your browser to load the editor.'.
format(host, port, name))
def add_spark(name, discover_now, device_id, discovery, device_host, command,
force, release, simulation, discovery_release):
"""
Create or update a Spark service.
If you run brewblox-ctl add-spark without any arguments,
it will prompt you for required info, and then create a sensibly configured service.
If you want to fine-tune your service configuration, multiple arguments are available.
For a detailed explanation: https://brewblox.netlify.com/user/connect_settings.html
"""
utils.check_config()
utils.confirm_mode()
sudo = utils.optsudo()
config = utils.read_compose()
if name in config['services'] and not force:
click.echo(
'Service "{}" already exists. Use the --force flag if you want to overwrite it'
.format(name))
raise SystemExit(1)
if device_id is None and discover_now and not simulation:
dev = find_device(discovery, discovery_release, device_host)
if dev:
device_id = dev.split(' ')[1]
elif device_host is None:
# We have no device ID, and no device host. Avoid a wildcard service
click.echo('No valid combination of device ID and device host.')
raise SystemExit(1)
commands = [
'--name=' + name,
'--mdns-port=${BREWBLOX_PORT_MDNS}',
'--discovery=' + discovery,
]
if device_id:
commands += ['--device-id=' + device_id]
if device_host:
commands += ['--device-host=' + device_host]
if simulation:
commands += ['--simulation']
if command:
commands += [command]
config['services'][name] = {
'image':
'brewblox/brewblox-devcon-spark:{}'.format(utils.docker_tag(release)),
'privileged':
True,
'restart':
'unless-stopped',
'labels': [
'traefik.port=5000',
'traefik.frontend.rule=PathPrefix: /{}'.format(name),
],
'command':
' '.join(commands)
}
if simulation:
volume_dir = 'simulator__{}'.format(name)
config['services'][name]['volumes'] = [
'./{}:/app/simulator'.format(volume_dir)
]
sh('mkdir -m 777 -p {}'.format(volume_dir))
utils.write_compose(config)
click.echo("Added Spark service '{}'.".format(name))
click.echo('It will automatically show up in the UI.\n')
if utils.confirm("Do you want to run 'brewblox-ctl up' now?"):
sh('{}docker-compose up -d --remove-orphans'.format(sudo))
def add_spark(name, discover_now, device_id, discovery_type, device_host,
command, force, release, simulation):
"""
Create or update a Spark service.
If you run brewblox-ctl add-spark without any arguments,
it will prompt you for required info, and then create a sensibly configured service.
If you want to fine-tune your service configuration, multiple arguments are available.
For a detailed explanation: https://brewblox.netlify.com/user/connect_settings.html
"""
utils.check_config()
utils.confirm_mode()
image_name = 'brewblox/brewblox-devcon-spark'
sudo = utils.optsudo()
config = utils.read_compose()
if name in config['services'] and not force:
click.echo(
'Service "{}" already exists. Use the --force flag if you want to overwrite it'
.format(name))
raise SystemExit(1)
for (nm, svc) in config['services'].items():
img = svc.get('image', '')
cmd = svc.get('command', '')
if not any([
nm == name,
not img.startswith(image_name),
'--device-id' in cmd,
'--device-host' in cmd,
'--simulation' in cmd,
]):
utils.warn(
"The existing Spark service '{}' does not have any connection settings."
.format(nm))
utils.warn('It will connect to any controller it can find.')
utils.warn(
'This may cause multiple services to connect to the same controller.'
)
utils.warn("To reconfigure '{}', please run:".format(nm))
utils.warn('')
utils.warn(' brewblox-ctl add-spark -f --name {}'.format(nm))
utils.warn('')
utils.select('Press ENTER to continue or Ctrl-C to exit')
if device_id is None and discover_now and not simulation:
dev = find_device(discovery_type, device_host)
if dev:
device_id = dev['id']
elif device_host is None:
# We have no device ID, and no device host. Avoid a wildcard service
click.echo('No valid combination of device ID and device host.')
raise SystemExit(1)
commands = [
'--name=' + name,
'--discovery=' + discovery_type,
]
if device_id:
commands += ['--device-id=' + device_id]
if device_host:
commands += ['--device-host=' + device_host]
if simulation:
commands += ['--simulation']
if command:
commands += [command]
config['services'][name] = {
'image': '{}:{}'.format(image_name, utils.docker_tag(release)),
'privileged': True,
'restart': 'unless-stopped',
'command': ' '.join(commands)
}
if simulation:
volume_dir = 'simulator__{}'.format(name)
config['services'][name]['volumes'] = [
'./{}:/app/simulator'.format(volume_dir)
]
sh('mkdir -m 777 -p {}'.format(volume_dir))
utils.write_compose(config)
click.echo("Added Spark service '{}'.".format(name))
click.echo('It will automatically show up in the UI.\n')
if utils.confirm("Do you want to run 'brewblox-ctl up' now?"):
sh('{}docker-compose up -d --remove-orphans'.format(sudo))
def restart_services(ctx):
if utils.confirm('Do you want to restart your Brewblox services?'):
ctx.invoke(up)
def restart_services(ctx: click.Context, **kwargs):
if utils.confirm('Do you want to restart your Brewblox services?'):
ctx.invoke(up, **kwargs)
def setup(port_check):
"""Run first-time setup in Brewblox directory.
Run after brewblox-ctl install, in the newly created Brewblox directory.
This will create all required configuration files for your system.
You can safely use this command to partially reset your system.
Before making any changes, it will check for existing files,
and prompt if any are found. It will do so separately for docker-compose,
datastore, history, and gateway files.
Choose to skip any, and the others will still be created and configured.
\b
Steps:
- Check whether files already exist.
- Set .env values.
- Create docker-compose configuration files. (Optional)
- Pull docker images.
- Create datastore (CouchDB) directory. (Optional)
- Create history (InfluxDB) directory. (Optional)
- Create gateway (Traefik) directory. (Optional)
- Create SSL certificates. (Optional)
- Start and configure services. (Optional)
- Stop all services.
- Set version number in .env.
"""
utils.check_config()
utils.confirm_mode()
sudo = utils.optsudo()
datastore_url = utils.datastore_url()
history_url = utils.history_url()
upped_services = ['traefik', 'influx', 'history']
preset_modules = ['services', 'dashboards', 'dashboard-items']
if port_check:
check_ports()
skip_compose = \
utils.path_exists('./docker-compose.yml') \
and utils.confirm('This directory already contains a docker-compose.yml file. ' +
'Do you want to keep it?')
skip_datastore = \
utils.path_exists('./couchdb/') \
and utils.confirm('This directory already contains Couchdb datastore files. ' +
'Do you want to keep them?')
skip_history = \
utils.path_exists('./influxdb/') \
and utils.confirm('This directory already contains Influx history files. ' +
'Do you want to keep them?')
skip_gateway = \
utils.path_exists('./traefik/') \
and utils.confirm('This directory already contains Traefik gateway files. ' +
'Do you want to keep them?')
utils.info('Setting .env values...')
for key, default_val in const.ENV_DEFAULTS.items():
utils.setenv(key, utils.getenv(key, default_val))
if not skip_compose:
utils.info('Copying configuration...')
sh('cp -f {}/* ./'.format(const.CONFIG_DIR))
# Stop and pull after we're sure we have a compose file
utils.info('Stopping services...')
sh('{}docker-compose down --remove-orphans'.format(sudo))
utils.info('Pulling docker images...')
sh('{}docker-compose pull'.format(sudo))
if not skip_datastore:
utils.info('Creating datastore directory...')
upped_services.append('datastore')
sh('sudo rm -rf ./couchdb/; mkdir ./couchdb/')
if not skip_history:
utils.info('Creating history directory...')
sh('sudo rm -rf ./influxdb/; mkdir ./influxdb/')
if not skip_gateway:
utils.info('Creating gateway directory...')
sh('sudo rm -rf ./traefik/; mkdir ./traefik/')
utils.info('Creating SSL certificate...')
sh('{}docker run --rm -v "$(pwd)"/traefik/:/certs/ '.format(sudo) +
'brewblox/omgwtfssl:{}'.format(utils.docker_tag()))
sh('sudo chmod 644 traefik/brewblox.crt')
sh('sudo chmod 600 traefik/brewblox.key')
# Bring images online that we will send configuration
utils.info('Starting configured services...')
sh('{}docker-compose up -d --remove-orphans {}'.format(
sudo, ' '.join(upped_services)))
if not skip_datastore:
# Generic datastore setup
utils.info('Configuring datastore settings...')
sh('{} http wait {}'.format(const.CLI, datastore_url))
sh('{} http put {}/_users'.format(const.CLI, datastore_url))
sh('{} http put {}/_replicator'.format(const.CLI, datastore_url))
sh('{} http put {}/_global_changes'.format(const.CLI, datastore_url))
sh('{} http put {}/{}'.format(const.CLI, datastore_url,
const.UI_DATABASE))
# Load presets
utils.info('Loading preset data...')
for mod in preset_modules:
sh('{} http post {}/{}/_bulk_docs -f {}/{}.json'.format(
const.CLI, datastore_url, const.UI_DATABASE, const.PRESETS_DIR,
mod))
# Always setup history
utils.info('Configuring history settings...')
sh('{} http wait {}/ping'.format(const.CLI, history_url))
sh('{} http post {}/query/configure'.format(const.CLI, history_url))
# Setup is done - leave system in stable state
utils.info('Stopping services...')
sh('{}docker-compose down'.format(utils.optsudo()))
# Setup is complete and ok - now set CFG version
utils.setenv(const.CFG_VERSION_KEY, const.CURRENT_VERSION)
utils.info('All done!')
def update(ctx, update_ctl, update_ctl_done, pull, avahi_config, migrate,
prune, from_version):
"""Download and apply updates.
This is the one-stop-shop for updating your Brewblox install.
You can use any of the options to fine-tune the update by enabling or disabling subroutines.
By default, all options are enabled.
--update-ctl/--no-update-ctl determines whether it download new versions
of brewblox-ctl and brewblox-ctl lib. If this flag is set, update will download the new version
and then restart itself. This way, the migrate is done with the latest version of brewblox-ctl.
If you're using dry run mode, you'll notice the hidden option --update-ctl-done.
You can use it to watch the rest of the update: it\'s a flag to avoid endless loops.
--pull/--no-pull governs whether new docker images are pulled.
This is useful if any of your services is using a local image (not from Docker Hub).
--avahi-config/--no-avahi-config. Check avahi-daemon configuration.
This is required for TCP discovery of Spark controllers.
--migrate/--no-migrate. Updates regularly require changes to configuration.
To do this, services are stopped. If the update only requires pulling docker images,
you can disable migration to avoid the docker-compose down/up.
--prune/--no-prune (prompts if not set). Updates to docker images can leave unused old versions
on your system. These can be pruned to free up disk space.
Do note that this includes all images on your system, not just those created by Brewblox.
\b
Steps:
- Update brewblox-ctl and extensions.
- Restart update command to run with updated brewblox-ctl.
- Pull docker images.
- Stop services.
- Migrate configuration files.
- Copy docker-compose.shared.yml from defaults.
- Start services.
- Migrate service configuration.
- Write version number to .env file.
- Prune unused images.
"""
utils.check_config()
utils.confirm_mode()
sudo = utils.optsudo()
prev_version = StrictVersion(from_version)
if prev_version.version == (0, 0, 0):
click.echo(
'This configuration was never set up. Please run brewblox-ctl setup first'
)
raise SystemExit(1)
if prev_version > StrictVersion(const.CURRENT_VERSION):
click.echo(
'Your system is running a version newer than the selected release. '
+ 'This may be due to switching release tracks.' +
'You can use the --from-version flag if you know what you are doing.'
)
raise SystemExit(1)
if Path.home().name != 'root' and Path.home().exists() \
and Path('/usr/local/bin/brewblox-ctl').exists(): # pragma: no cover
utils.warn('brewblox-ctl appears to have been installed using sudo.')
if utils.confirm('Do you want to fix this now?'):
sh('sudo {} -m pip uninstall -y brewblox-ctl docker-compose'.
format(const.PY),
check=False)
utils.pip_install('brewblox-ctl') # docker-compose is a dependency
# Debian stretch still has the bug where ~/.local/bin is not included in $PATH
if '.local/bin' not in utils.getenv('PATH'):
sh('echo \'export PATH="$HOME/.local/bin:$PATH"\' >> ~/.bashrc'
)
utils.info(
'Please run "exec $SHELL --login" to apply the changes to $PATH'
)
return
if update_ctl and not update_ctl_done:
utils.info('Updating brewblox-ctl...')
utils.pip_install('brewblox-ctl')
utils.info('Updating brewblox-ctl libs...')
utils.load_ctl_lib()
# Restart ctl - we just replaced the source code
sh(' '.join([
const.PY, *const.ARGS, '--update-ctl-done',
'--prune' if prune else '--no-prune'
]))
return
if avahi_config:
utils.update_avahi_config()
if migrate:
# Everything except downed_migrate can be done with running services
utils.info('Stopping services...')
sh('{}docker-compose down --remove-orphans'.format(sudo))
utils.info('Migrating configuration files...')
apply_config()
downed_migrate(prev_version)
else:
utils.info('Updating configuration files...')
apply_config()
if pull:
utils.info('Pulling docker images...')
sh('{}docker-compose pull'.format(sudo))
utils.info('Starting services...')
sh('{}docker-compose up -d --remove-orphans'.format(sudo))
if migrate:
utils.info('Migrating service configuration...')
upped_migrate(prev_version)
utils.info('Updating version number to {}...'.format(
const.CURRENT_VERSION))
utils.setenv(const.CFG_VERSION_KEY, const.CURRENT_VERSION)
if prune:
utils.info('Pruning unused images...')
sh('{}docker image prune -f'.format(sudo))
utils.info('Pruning unused volumes...')
sh('{}docker volume prune -f'.format(sudo))
def check_duplicate(config: dict, name: str):
if name in config['services'] \
and not utils.confirm(f'Service `{name}` already exists. Do you want to overwrite it?'):
raise SystemExit(1)
def setup(ctx, avahi_config, pull, port_check):
"""Run first-time setup in Brewblox directory.
Run after brewblox-ctl install, in the newly created Brewblox directory.
This will create all required configuration files for your system.
You can safely use this command to partially reset your system.
Before making any changes, it will check for existing files,
and prompt if any are found. It will do so separately for docker-compose,
datastore, history, and gateway files.
Choose to skip any, and the others will still be created and configured.
\b
Steps:
- Check whether files already exist.
- Set .env values.
- Update avahi-daemon config. (Optional)
- Create docker-compose configuration files. (Optional)
- Pull docker images. (Optional)
- Create datastore (Redis) directory. (Optional)
- Create history (Victoria) directory. (Optional)
- Create gateway (Traefik) directory. (Optional)
- Create SSL certificates. (Optional)
- Start and configure services. (Optional)
- Stop all services.
- Set version number in .env.
"""
utils.check_config()
utils.confirm_mode()
sudo = utils.optsudo()
if port_check:
check_ports()
skip_compose = \
utils.path_exists('./docker-compose.yml') \
and utils.confirm('This directory already contains a docker-compose.yml file. ' +
'Do you want to keep it?')
skip_datastore = \
utils.path_exists('./redis/') \
and utils.confirm('This directory already contains Redis datastore files. ' +
'Do you want to keep them?')
skip_history = \
utils.path_exists('./victoria/') \
and utils.confirm('This directory already contains Victoria history files. ' +
'Do you want to keep them?')
skip_gateway = \
utils.path_exists('./traefik/') \
and utils.confirm('This directory already contains Traefik gateway files. ' +
'Do you want to keep them?')
skip_eventbus = \
utils.path_exists('./mosquitto/') \
and utils.confirm('This directory already contains Mosquitto config files. ' +
'Do you want to keep them?')
utils.info('Setting .env values...')
for key, default_val in const.ENV_DEFAULTS.items():
utils.setenv(key, utils.getenv(key, default_val))
if avahi_config:
utils.update_avahi_config()
utils.info('Copying docker-compose.shared.yml...')
sh(f'cp -f {const.CONFIG_DIR}/docker-compose.shared.yml ./')
if not skip_compose:
utils.info('Copying docker-compose.yml...')
sh(f'cp -f {const.CONFIG_DIR}/docker-compose.yml ./')
# Stop and pull after we're sure we have a compose file
utils.info('Stopping services...')
sh(f'{sudo}docker-compose down')
if pull:
utils.info('Pulling docker images...')
sh(f'{sudo}docker-compose pull')
if not skip_datastore:
utils.info('Creating datastore directory...')
sh('sudo rm -rf ./redis/; mkdir ./redis/')
if not skip_history:
utils.info('Creating history directory...')
sh('sudo rm -rf ./victoria/; mkdir ./victoria/')
if not skip_gateway:
utils.info('Creating gateway directory...')
sh('sudo rm -rf ./traefik/; mkdir ./traefik/')
utils.info('Creating SSL certificate...')
ctx.invoke(makecert)
if not skip_eventbus:
utils.info('Creating mosquitto config directory...')
sh('sudo rm -rf ./mosquitto/; mkdir ./mosquitto/')
# Always copy cert config to traefik dir
sh(f'cp -f {const.CONFIG_DIR}/traefik-cert.yaml ./traefik/')
# Setup is complete and ok - now set CFG version
utils.setenv(const.CFG_VERSION_KEY, const.CURRENT_VERSION)
utils.info('All done!')
