def RunCommand(is_interactive):
gp = Rhino.Input.Custom.GetPoint()
gp.SetCommandPrompt(
"get a point as a locaiton and setting frame size, scale 1:" +
str(config.DRAWINGSCALE))
sizeValues = "A5", "A4", "A3", "A2", "A1", "A0"
sizeValue = config.FRAMESIZE
sizeIndex = sizeValues.index(sizeValue)
opList = gp.AddOptionList("FrameSize", sizeValues, sizeIndex)
gp.DynamicDraw += GetPointDynamicDrawFunc
while True:
get_rc = gp.Get()
if gp.CommandResult() != Rhino.Commands.Result.Success:
return gp.CommandResult()
if get_rc == Rhino.Input.GetResult.Point:
point = gp.Point()
if not rs.IsLayer("Dim"):
util.initCaadLayer("Dim")
oldLayer = rs.CurrentLayer("Dim")
Dim.DrawFrameBySize(sizeValue, point, config.FRAMERIGHTMARGIN,
config.FRAMELEFTMARGIN)
rs.CurrentLayer(oldLayer)
elif get_rc == Rhino.Input.GetResult.Option:
if gp.OptionIndex() == opList:
sizeIndex = gp.Option().CurrentListOptionIndex
sizeValue = sizeValues[sizeIndex]
config.FRAMESIZE = sizeValue
continue
break
return Rhino.Commands.Result.Success
def RunCommand(is_interactive):
if not rs.IsLayer("Dim"):
util.initCaadLayer("Dim")
oldLayer = rs.CurrentLayer("Dim")
rs.Command("_DimAligned")
rs.CurrentLayer(oldLayer)
def drawOpening(distance, length, block=0):
if block == 1 and rs.IsBlock("window") == False:
util.initWindowBlock()
if block == 2 and rs.IsBlock("door") == False:
util.initDoorBlock()
if not rs.IsLayer("Axis"):
util.initCaadLayer("Axis")
twoLines = findTwoParallelLines()
if not twoLines:
return 0
pi, linei, linej = twoLines
if not linej:
return 0
pj = linej.CurveGeometry.Line.ClosestPoint(pi, False)
oldLockMode = rs.LayerLocked("Axis", True)
# side=0 start from startPoint , side=1 start from endPoint
if rs.Distance(linei.CurveGeometry.Line.From, pi) <= rs.Distance(
pi, linei.CurveGeometry.Line.To):
side = 0
else:
side = 1
# direct:
# 0 | 1
# -------
# 2 | 3
vji = rs.VectorCreate(pj, pi)
vi = linei.CurveGeometry.Line.Direction
angle = rs.Angle((0, 0, 0),
rs.VectorRotate(vji, -rs.Angle((0, 0, 0), vi)[0],
(0, 0, 1)))
if abs(angle[0] - 90) < sc.doc.ModelAbsoluteTolerance:
line0 = linei
line1 = linej
if side == 0:
direct = 2
else:
direct = 3
elif abs(angle[0] + 90) < sc.doc.ModelAbsoluteTolerance:
line0 = linej
line1 = linei
if side == 0:
direct = 0
else:
direct = 1
dl = DoubleLine(line0.CurveGeometry.Line, line1.CurveGeometry.Line)
newLayer = rs.ObjectLayer(line0.Id)
oldLayer = rs.CurrentLayer(newLayer)
dl.drawOpening(distance, length, side, block, direct)
rs.DeleteObject(line0.Id)
rs.DeleteObject(line1.Id)
rs.CurrentLayer(oldLayer)
rs.LayerLocked("Axis", oldLockMode)
def line2wall(layer):
go = Rhino.Input.Custom.GetOption()
go.AcceptNothing(True)
go.SetCommandPrompt("set wall width")
# set up the options
widthOption = Rhino.Input.Custom.OptionDouble(
config.DOUBLELINEWIDTH, config.DOUBLELINEWIDTHLIMIT[0],
config.DOUBLELINEWIDTHLIMIT[1])
go.AddOptionDouble("Width", widthOption)
while True:
get_rc = go.Get()
if go.CommandResult() != Rhino.Commands.Result.Success:
print go.CommandResult()
break
if get_rc == Rhino.Input.GetResult.Option:
continue
break
if go.CommandResult() != Rhino.Commands.Result.Cancel:
config.DOUBLELINEWIDTH = widthOption.CurrentValue
if not rs.IsLayer("Axis"):
util.initCaadLayer("Axis")
if not rs.IsLayer(layer):
util.initCaadLayer(layer)
go = Rhino.Input.Custom.GetObject()
go.SetCommandPrompt("Select lines")
go.GeometryFilter = Rhino.DocObjects.ObjectType.Curve
go.GetMultiple(1, 0)
if go.CommandResult() != Rhino.Commands.Result.Success:
return go.CommandResult()
oldLayer = rs.CurrentLayer(layer)
for lineCurveId in go.Objects():
if rs.IsLine(lineCurveId):
# make axis
rs.ObjectLayer(lineCurveId, "Axis")
# make wall
point0 = rs.CurveStartPoint(lineCurveId)
point1 = rs.CurveEndPoint(lineCurveId)
doubleLine = DoubleLine.MakeDoubleLine(config.DOUBLELINEWIDTH,
point0, point1)
doubleLine.draw()
rs.CurrentLayer(oldLayer)
def RunCommand(is_interactive):
go = Rhino.Input.Custom.GetObject()
go.SetCommandPrompt("Select a LinearDimension")
go.GeometryFilter = Rhino.DocObjects.ObjectType.Annotation
go.Get()
if go.CommandResult() != Rhino.Commands.Result.Success:
return go.CommandResult()
object_id = go.Objects()[0].ObjectId
if not rs.IsLayer("Dim"):
util.initCaadLayer("Dim")
oldLayer = rs.CurrentLayer("Dim")
Dim.DimSplit(object_id)
rs.CurrentLayer(oldLayer)
sc.doc.Views.Redraw()
def wallJoin(layer):
if not rs.IsLayer("Wall"):
util.initCaadLayer("Wall")
if not rs.IsLayer("Axis"):
util.initCaadLayer("Axis")
haveLayer = True
items = (layer, "Off", "On")
result = rs.GetBoolean("current layer option", items, True)
if result:
haveLayer = result[0]
oldLockMode = rs.LayerLocked("Axis", True)
while True:
go = Rhino.Input.Custom.GetObject()
go.SetCommandPrompt("Select 4 lines, each two parallel to anthor")
go.GeometryFilter = Rhino.DocObjects.ObjectType.Curve
go.GetMultiple(4, 4)
if go.CommandResult() != Rhino.Commands.Result.Success:
rs.LayerLocked("Axis", oldLockMode)
return go.CommandResult()
if go.ObjectCount != 4: return Rhino.Commands.Result.Failure
crv = []
for obj in go.Objects():
crv.append(obj.Geometry().Line)
rc, doubleLines = DoubleLine.GetIntersectedDoubleline(crv)
if rc:
doubleLine0 = doubleLines[0]
doubleLine1 = doubleLines[1]
if haveLayer:
oldLayer = rs.CurrentLayer(layer)
doubleLine0.drawIntersectionWithDoubleLine(doubleLine1)
if haveLayer:
rs.CurrentLayer(oldLayer)
rs.DeleteObjects(go.Objects())
else:
print "Error: no two doubleLines"
def RunCommand(is_interactive):
go = Rhino.Input.Custom.GetOption()
go.AcceptNothing(True)
go.SetCommandPrompt("set options")
# set up the options
widthOption = Rhino.Input.Custom.OptionDouble(
config.DOUBLELINEWIDTH, config.DOUBLELINEWIDTHLIMIT[0],
config.DOUBLELINEWIDTHLIMIT[1])
wallOption = Rhino.Input.Custom.OptionToggle(True, "Off", "On")
# offset side options
sideValues = "middle", "right", "left"
sideIndex = config.DOUBLELINEOFFSETSIDETYPE
go.AddOptionList("Type", sideValues, sideIndex)
go.AddOptionDouble("Width", widthOption)
go.AddOptionToggle("Wall", wallOption)
while True:
get_rc = go.Get()
if go.CommandResult() != Rhino.Commands.Result.Success:
print go.CommandResult()
break
if get_rc == Rhino.Input.GetResult.Option:
sideIndex = go.Option().CurrentListOptionIndex
config.DOUBLELINEOFFSETSIDETYPE = sideIndex
continue
break
if go.CommandResult() != Rhino.Commands.Result.Cancel:
config.DOUBLELINEWIDTH = widthOption.CurrentValue
isWall = wallOption.CurrentValue
if not rs.IsLayer("Wall"):
util.initCaadLayer("Wall")
if isWall:
DoubleLine.DrawDoubleLines("wall", sideIndex)
else:
DoubleLine.DrawDoubleLines(rs.CurrentLayer(), sideIndex)
sc.doc.Views.Redraw()
def RunCommand(is_interactive):
if not rs.IsLayer("Wall"):
util.initCaadLayer("Wall")
line2wall("wall")
sc.doc.Views.Redraw()
